1 2012-12-20 Joel Brobecker <brobecker@adacore.com>
3 * linux-fixed-code.s: Revert the previous change changing
4 the license from GPL v2 or later to GPL v3 or later.
6 2012-07-31 Mike Frysinger <vapier@gentoo.org>
8 * machs.c (bf54x_roms): Pass 0x1000 to alias field of BFROM, and
9 0x10000 to the alias field of BFROMA.
10 (bf561_roms): Pass 0x1000 to alias field of BFROM.
11 (bf59x_roms): Pass 0x10000 to alias field of BFROMA.
13 2012-07-31 Mike Frysinger <vapier@gentoo.org>
15 * machs.c (bfin_reg_fetch): Change return 0 to return -1, and
16 return -1 to return 4.
17 (bfin_reg_store): Likewise.
19 2012-06-15 Joel Brobecker <brobecker@adacore.com>
21 * config.in, configure: Regenerate.
23 2012-04-09 Mike Frysinger <vapier@gentoo.org>
25 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pint.
26 * configure: Regenerate.
27 * dv-bfin_pint.c, dv-bfin_pint.h: New device model.
28 * machs.c (bf542_dev): Add PINT register blocks.
29 (bf544_dev, bf547_dev): Likewise.
31 (bf54x_port): Add pint/gpio routing.
32 * machs.h (BFIN_MMR_PINT_SIZE): Define.
34 2012-04-09 Mike Frysinger <vapier@gentoo.org>
36 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio2.
37 * configure: Regenerate.
38 * dv-bfin_gpio2.c, dv-bfin_gpio2.h: New device model.
39 * machs.c (bf54x_mem): Delete GPIO mem stub.
40 (bf542_dev): Add GPIO register blocks.
41 (bf544_dev, bf547_dev): Likewise.
42 * machs.h (BFIN_MMR_GPIO2_SIZE): Define.
44 2012-04-09 Robin Getz <robin.getz@analog.com>
46 * bfin-sim.c (decode_dsp32shift_0): Extract the sign for ASHIFT
47 and LSHIFT, and set ASTAT based on the before/after values.
48 Rename "val" to "acc" to be consistent with other code branches.
50 2012-04-09 Robin Getz <robin.getz@analog.com>
52 * bfin-sim.c (sgn_extend): New helper.
53 (decode_dsp32shiftimm_0): Call lshift when newimmag is more
54 than 16, otherwise call ashiftrt. Set ASTAT fields as needed.
55 For accumulator shifts, call new sgn_extend helper.
57 2012-04-08 Mike Frysinger <vapier@gentoo.org>
59 * bfin-sim.c (illegal_instruction_or_combination): New helper.
60 (decode_ProgCtrl_0): Call illegal_instruction_or_combination instead
61 of illegal_instruction.
62 (decode_PushPopReg_0, decode_CCflag_0, decode_CC2dreg_0,
63 decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
64 decode_dspLDST_0, decode_LDST_0, _interp_insn_bfin): Likewise.
65 (decode_PushPopMultiple_0): Call illegal_instruction_combination when
66 PARALLEL_GROUP is not BFIN_PARALLEL_NONE.
67 (decode_CCflag_0, decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0,
68 decode_COMPI2opD_0, decode_COMPI2opP_0): Likewise.
69 (decode_CC2stat_0): Check PARALLEL_GROUP before cbit.
70 (decode_LDSTpmod_0): Call illegal_instruction_combination when
71 PARALLEL_GROUP is BFIN_PARALLEL_GROUP2.
72 (decode_dagMODim_0, decode_dagMODik_0, decode_LDST_0,
73 decode_LDSTiiFP_0, decode_LDSTii_0): Likewise.
75 2012-04-08 Mike Frysinger <vapier@gentoo.org>
77 * bfin-sim.h (bfin_parallel_group): New enum.
78 (bfin_cpu_state): Add new "group" member.
79 (PARALLEL_GROUP): Define.
80 * bfin-sim.c (decode_ProgCtrl_0): Change INSN_LEN check to
82 (decode_CaCTRL_0, decode_PushPopReg_0, decode_ccMV_0, decode_CCflag_0,
83 decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
84 decode_LOGI2op_0, decode_LoopSetup_0, decode_LDIMMhalf_0,
85 decode_CALLa_0, decode_linkage_0): Likewise.
86 (_interp_insn_bfin): Set PARALLEL_GROUP.
87 (interp_insn_bfin): Likewise.
89 2012-04-08 Mike Frysinger <vapier@gentoo.org>
91 * bfin-sim.c (decode_dsp32alu_0): Delete extra space in TRACE_INSN.
93 2012-04-01 Mike Frysinger <vapier@gentoo.org>
95 * bfin-sim.c (_interp_insn_bfin): Call illegal_instruction_combination
96 when INSN_LEN is non-zero before 32bit decode.
98 2012-04-01 Mike Frysinger <vapier@gentoo.org>
100 * bfin-dis.c (fmtconst): Replace decimal handling with a single
101 sprintf call and the '*' field width.
103 2012-04-01 Mike Frysinger <vapier@gentoo.org>
105 * machs.c (bfin_model_map_bfrom): Return when mnum is 535.
107 2012-04-01 Mike Frysinger <vapier@gentoo.org>
109 * interp.c (bfin_user_init): Move auxvt_size decl from top to
110 inside of auxvt check.
112 2012-03-31 Mike Frysinger <vapier@gentoo.org>
114 * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2.
116 2012-03-31 Mike Frysinger <vapier@gentoo.org>
118 * devices.c: Include devices.h.
120 2012-03-24 Mike Frysinger <vapier@gentoo.org>
122 * aclocal.m4, config.in, configure: Regenerate.
124 2012-03-19 Robin Getz <robin.getz@analog.com>
125 Mike Frysinger <vapier@gentoo.org>
127 * bfin-sim.c (lshift): Add an overflow flag. Delete now unused
128 i, j, and tmp vars. Add a new v_i var. Split the overflow logic
129 out from the saturate logic. Do not set V ASTAT bits when working
131 (decode_ALU2op_0): Add new argument to lshift call.
132 (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
135 2012-03-18 Mike Frysinger <vapier@gentoo.org>
137 * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
138 (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
140 (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
142 2012-03-18 Mike Frysinger <vapier@gentoo.org>
144 * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
145 ARRAY_SIZE rather than hardcoded constant.
147 2012-02-04 Mike Frysinger <vapier@gentoo.org>
149 * config.in: Regenerate.
150 * configure: Likewise.
151 * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
152 * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
153 _LINUX_TYPES_H defines.
155 2011-12-03 Mike Frysinger <vapier@gentoo.org>
157 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
158 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
159 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
160 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
161 tstr in the tbuf output.
163 2011-12-03 Mike Frysinger <vapier@gentoo.org>
165 * Makefile.in: Delete all dependency rules.
166 * aclocal.m4, configure: Regenerate.
168 2011-10-19 Mike Frysinger <vapier@gentoo.org>
170 * configure: Regenerate after common/acinclude.m4 update.
172 2011-10-17 Mike Frysinger <vapier@gentoo.org>
174 * configure.ac: Change include to common/acinclude.m4.
175 * aclocal.m4, configure: Regenerate.
177 2011-10-17 Mike Frysinger <vapier@gentoo.org>
179 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
180 call. Replace common.m4 include with SIM_AC_COMMON.
181 * configure: Regenerate.
183 2011-09-28 Mike Frysinger <vapier@gentoo.org>
185 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
187 2011-07-05 Mike Frysinger <vapier@gentoo.org>
189 * interp.c (sim_do_command): Delete.
191 2011-07-01 Mike Frysinger <vapier@gentoo.org>
193 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
194 stat_map_32 and stat_map_64.
195 (cb_libgloss_stat_map_32): New stat map.
196 (stat_map_32, stat_map_64): New stat map pointers.
197 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
198 stat_map_64 to cb_linux_stat_map_64.
199 (bfin_virtual_init): New function.
200 (sim_create_inferior): Call bfin_virtual_init for all other envs.
202 2011-06-22 Mike Frysinger <vapier@gentoo.org>
204 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
205 sc.result2 and dreg 2 to sc.errcode.
207 2011-06-18 Robin Getz <robin.getz@analog.com>
209 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
210 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
211 ASHIFT accumulator insns.
213 2011-06-18 Robin Getz <robin.getz@analog.com>
215 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
216 (lshiftrt): Likewise.
218 2011-06-18 Robin Getz <robin.getz@analog.com>
220 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
221 rather than get_extended_acc in LSHIFT insns.
223 2011-06-18 Robin Getz <robin.getz@analog.com>
225 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
226 Check MM once when mmod is M_FU to match M_TFU better.
228 2011-06-18 Robin Getz <robin.getz@analog.com>
230 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
231 32, perform a left shift. Update the corresponding AV bit. Set
232 AZ when the low 32bits are also zero.
234 2011-06-18 Robin Getz <robin.getz@analog.com>
236 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
237 call lshift only when count is positive. Otherwise, call ashiftrt.
238 With arithmetic right shift insns, call ashiftrt when the value is
239 small enough, otherwise call lshift.
241 2011-06-18 Robin Getz <robin.getz@analog.com>
243 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
244 mmod is M_IH rather than computing the result by hand.
246 2011-06-18 Robin Getz <robin.getz@analog.com>
248 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
249 before saturation, set sat when more cases saturate, and set the
250 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
251 M_W32, change the max values compared against.
252 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
253 when processing MAC1 and pass v_0 when processing MAC0. Combine
254 the results into the V/VS ASTAT bits.
256 2011-06-18 Robin Getz <robin.getz@analog.com>
258 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
259 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
262 2011-06-18 Robin Getz <robin.getz@analog.com>
264 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
265 allow MM to sign extend all the time.
266 (decode_macfunc): Likewise. Drop sign extension of unsigned
269 2011-06-18 Robin Getz <robin.getz@analog.com>
271 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
272 (decode_macfunc): Likewise when mmod is M_IH.
274 2011-06-18 Mike Frysinger <vapier@gentoo.org>
276 * interp.c (sim_create_inferior): Change free to freeargv.
278 2011-06-04 Mike Frysinger <vapier@gentoo.org>
280 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
281 (bf537_port): Define applicable devices with PORT to the glue-or
282 devices instead of SIC.
283 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
284 Only parse reg/type when the device has an address. Move the call
285 to dv_bfin_hw_port_parse up before slash check.
287 2011-06-04 Mike Frysinger <vapier@gentoo.org>
289 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
290 BFIN_SIC_TO_CEC_PORTS definition.
291 (SIC_PORTS): New define.
292 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
293 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
294 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
296 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
297 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
298 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
299 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
300 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
301 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
302 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
303 * machs.c (bfin_port_layout): New structure.
304 (bfin_model_data): Add new "port" and "port_count" members.
305 (PORT, SIC): New defines.
306 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
307 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
308 Move and redefine port layout from dv-bfin_sic.c to here.
309 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
310 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
311 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
312 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
313 bf548_port, bf549_port): New defines.
314 (bfin_model_data): Link in new bfin_port_layout.port member.
315 (dv_bfin_hw_port_parse): New function.
316 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
317 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
318 bfin_sic links with new dv_bfin_hw_port_parse function.
320 2011-06-03 Mike Frysinger <vapier@gentoo.org>
322 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
324 2011-05-25 Mike Frysinger <vapier@gentoo.org>
326 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
328 2011-05-25 Mike Frysinger <vapier@gentoo.org>
330 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
331 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
332 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
333 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
334 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
335 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
336 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
337 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
338 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
339 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
340 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
341 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
342 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
343 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
344 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
345 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
346 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
347 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
348 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
349 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
350 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
351 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
352 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
353 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
354 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
355 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
356 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
357 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
359 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
361 2011-05-25 Mike Frysinger <vapier@gentoo.org>
363 * Makefile.in (dv-bfin_pfmon.o): New target.
364 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
365 * configure: Regenerated.
366 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
367 * machs.c: Add include new bfin_pfmon.h.
368 (bfin_core_dev): Add pfmon.
370 2011-05-25 Mike Frysinger <vapier@gentoo.org>
372 * machs.c (bf526_roms): Add a region with rev of 2.
373 (bf54x_roms): Add regions with rev of 4.
374 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
375 bf54x_l1-0.4.h headers.
376 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
379 2011-05-14 Mike Frysinger <vapier@gentoo.org>
381 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
384 2011-05-14 Mike Frysinger <vapier@gentoo.org>
386 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
387 local uart. When LOOP_ENA is set in mcr, write to the saved byte
388 and count fields of the uart.
389 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
390 and bfin_uart_get_next_byte.
391 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
392 check first, and skip the remaining code when LOOP_ENA is set in mcr.
393 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
394 (bfin_uart_get_next_byte): Likewise.
395 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
396 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
397 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
399 2011-05-09 Mike Frysinger <vapier@gentoo.org>
401 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
402 from uart->lsr before setting them.
404 2011-04-27 Mike Frysinger <vapier@gentoo.org>
406 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
407 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
408 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
409 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
410 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
413 2011-04-26 Mike Frysinger <vapier@gentoo.org>
415 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
416 (bfin_gpio_io_write_buffer): Store the current port state into
417 "data", and call bfin_gpio_forward_ouput when the data or dir
419 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
421 2011-04-26 Mike Frysinger <vapier@gentoo.org>
423 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
424 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
425 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
426 mask a or mask b MMRs are written.
427 (bfin_gpio_port_event): When handling edge gpios, set the bit in
428 int_state, call bfin_gpio_forward_ints, and then clear the bit.
429 When handling level gpios, clear/set the bit in int_state rather
430 than returning immediately. Call bfin_gpio_forward_ints instead
431 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
433 2011-04-16 Mike Frysinger <vapier@gentoo.org>
435 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
436 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
438 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
439 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
441 2011-04-14 Mike Frysinger <vapier@gentoo.org>
443 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
444 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
445 and BYTEUNPACK insns.
447 2011-04-11 Mike Frysinger <vapier@gentoo.org>
449 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
450 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
451 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
452 in the trace output, and call the new bfin_sic_port_event func.
454 2011-04-11 Mike Frysinger <vapier@gentoo.org>
456 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
458 2011-04-01 Mike Frysinger <vapier@gentoo.org>
460 * dv-bfin_otp.c (bfin_otp_ports): Declare.
461 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
463 2011-03-29 Mike Frysinger <vapier@gentoo.org>
465 * configure: Regenerate after common/aclocal.m4 changes.
467 2011-03-28 Robin Getz <robin.getz@analog.com>
469 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
470 and add to casted low 16bits of A0.L and store in val0. Cast high
471 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
472 store in val1. Delete bit checks of val0 and val1.
474 2011-03-26 Robin Getz <robin.getz@analog.com>
476 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
477 the result was 0x80000000 for RND12 subtraction.
479 2011-03-26 Robin Getz <robin.getz@analog.com>
481 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
483 2011-03-24 Mike Frysinger <vapier@gentoo.org>
485 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
486 major code flow point.
487 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
488 before calling hw_port_event on ourselves.
489 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
490 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
491 at the start of the function.
493 2011-03-24 Mike Frysinger <vapier@gentoo.org>
495 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
496 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
497 Invert port->both bit check.
499 2011-03-24 Mike Frysinger <vapier@gentoo.org>
501 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
502 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
504 2011-03-23 Mike Frysinger <vapier@gentoo.org>
506 * TODO: Document some known SIC issues.
508 2011-03-23 Mike Frysinger <vapier@gentoo.org>
510 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
511 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
512 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
513 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
514 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
515 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
516 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
517 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
518 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
519 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
520 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
521 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
522 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
523 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
525 2011-03-23 Mike Frysinger <vapier@gentoo.org>
527 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
529 2011-03-23 Mike Frysinger <vapier@gentoo.org>
531 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
533 2011-03-23 Robin Getz <robin.getz@analog.com>
535 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
536 value for the VIT_MAX insn, and mask off the result when done.
538 2011-03-23 Robin Getz <robin.getz@analog.com>
540 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
541 and set A0 to a0_lo when up_lo is false.
543 2011-03-23 Robin Getz <robin.getz@analog.com>
545 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
546 saturate_s40, and use the v parameter to update the AV bit. Set the
547 AC bit only when the final result is 0.
549 2011-03-23 Mike Frysinger <vapier@gentoo.org>
551 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
552 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
553 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
554 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
555 Encode ids with the ENC macro.
556 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
557 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
558 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
559 (bfin_sic_533_port_event): Delete.
560 (bfin_sic_finish): Call set_hw_port_event with
561 bfin_sic_537_port_event for BF533 and BF59x targets.
563 2011-03-23 Robin Getz <robin.getz@analog.com>
565 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
566 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
568 2011-03-23 Mike Frysinger <vapier@gentoo.org>
570 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
571 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
572 Change bfin_gpio addresses from f/g/h to 5/6/7.
573 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
575 2011-03-17 Mike Frysinger <vapier@gentoo.org>
577 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
578 * configure: Regenerate.
579 * config.in: Regenerate.
580 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
583 2011-03-15 Mike Frysinger <vapier@gentoo.org>
585 * Makefile.in (dv-bfin_gpio.o): New target.
586 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
587 * configure: Regenerate.
588 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
589 * machs.c: Include dv-bfin_gpio.h.
590 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
591 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
592 Delete GPIO memory stubs.
593 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
594 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
596 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
598 2011-03-15 Mike Frysinger <vapier@gentoo.org>
600 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
601 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
602 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
603 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
604 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
605 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
606 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
607 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
608 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
609 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
610 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
611 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
612 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
613 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
614 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
615 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
616 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
618 2011-03-15 Robin Getz <robin.getz@analog.com>
620 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
623 2011-03-15 Robin Getz <robin.getz@analog.com>
625 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
627 2011-03-15 Robin Getz <robin.getz@analog.com>
629 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
630 high bit is set after extract_mult.
631 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
632 functions. Use these to update the AN bit.
634 2011-03-15 Robin Getz <robin.getz@analog.com>
636 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
637 the extract_mult functions. Include these when updating the V, VS,
640 2011-03-15 Robin Getz <robin.getz@analog.com>
642 * bfin-sim.c (astat_names): New global bit array.
643 (decode_CC2stat_0): Delete local astat_name and astat_names.
644 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
645 Print out ASTAT bit values when checking an ASTAT register.
647 2010-03-15 Robin Getz <robin.getz@analog.com>
649 * bfin-sim.c (extract_mult): Handle M_IU.
651 2011-03-05 Mike Frysinger <vapier@gentoo.org>
653 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
654 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
655 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
656 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
657 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
658 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
659 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
660 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
661 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
662 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
663 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
664 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
665 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
666 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
667 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
668 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
669 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
670 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
671 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
672 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
673 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
674 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
675 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
676 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
677 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
678 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
679 tconfig.in: New Blackfin port.