1 2015-03-15 Mike Frysinger <vapier@gentoo.org>
3 * tconfig.in: Delete includes.
4 [HAVE_DV_SOCKSER]: Delete.
6 2015-03-14 Mike Frysinger <vapier@gentoo.org>
8 * bfin-sim.c (decode_dsp32alu_0): Change v to bu32.
10 2015-03-14 Mike Frysinger <vapier@gentoo.org>
12 * Makefile.in (SIM_RUN_OBJS): Delete.
14 2015-03-10 Mike Frysinger <vapier@gentoo.org>
17 * Makefile.in ($(srcdir)/linux-fixed-code.h): Put a ; after the
18 print sed command for BSD compatibility.
20 2015-03-08 Mike Frysinger <vapier@gentoo.org>
23 * Makefile.in ($(srcdir)/linux-fixed-code.h): Specify the asm input
24 directly rather than use $<. Move the file name to the end of the
25 sed command to be POSIX compliant.
27 2014-08-19 Alan Modra <amodra@gmail.com>
29 * configure: Regenerate.
31 2014-08-15 Roland McGrath <mcgrathr@google.com>
33 * configure: Regenerate.
34 * config.in: Regenerate.
36 2014-03-04 Mike Frysinger <vapier@gentoo.org>
38 * configure: Regenerate.
40 2013-09-23 Alan Modra <amodra@gmail.com>
42 * configure: Regenerate.
44 2013-06-23 Mike Frysinger <vapier@gentoo.org>
46 * bfin-sim.c (decode_dsp32alu_0): Add note about broken handling of
47 SEARCH with parallel insns.
49 2013-06-23 Mike Frysinger <vapier@gentoo.org>
51 * bfin-sim.c (decode_dsp32shift_0): Make sure HLs is 0 after last
53 (decode_dsp32shiftimm_0): Likewise.
54 Require HLs be less than 2 for accumulator shift insns.
56 2013-06-18 Mike Frysinger <vapier@gentoo.org>
58 * bfin-sim.c (decode_dsp32alu_0): Check more opcode fields before
59 decoding various insns.
61 2013-06-17 Mike Frysinger <vapier@gentoo.org>
63 * TODO: Add more notes.
65 2013-06-09 Mike Frysinger <vapier@gentoo.org>
67 * Makefile.in ($(srcdir)/linux-fixed-code.h): Add
68 @MAINTAINER_MODE_TRUE@ as the first item in the dependency list.
70 2013-06-03 Mike Frysinger <vapier@gentoo.org>
72 * aclocal.m4, configure: Regenerate.
74 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
78 2013-03-26 Mike Frysinger <vapier@gentoo.org>
80 * aclocal.m4, configure: Regenerate.
82 2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
84 * configure.ac: Use $SIM_DV_SOCKSER_O.
85 * configure: Regenerated.
87 2012-12-20 Joel Brobecker <brobecker@adacore.com>
89 * aclocal.m4: Revert the previous change changing
90 the license from GPL v2 or later to GPL v3 or later
91 (this file was generated).
93 2012-12-20 Joel Brobecker <brobecker@adacore.com>
95 * linux-fixed-code.s: Revert the previous change changing
96 the license from GPL v2 or later to GPL v3 or later.
98 2012-07-31 Mike Frysinger <vapier@gentoo.org>
100 * machs.c (bf54x_roms): Pass 0x1000 to alias field of BFROM, and
101 0x10000 to the alias field of BFROMA.
102 (bf561_roms): Pass 0x1000 to alias field of BFROM.
103 (bf59x_roms): Pass 0x10000 to alias field of BFROMA.
105 2012-07-31 Mike Frysinger <vapier@gentoo.org>
107 * machs.c (bfin_reg_fetch): Change return 0 to return -1, and
108 return -1 to return 4.
109 (bfin_reg_store): Likewise.
111 2012-06-15 Joel Brobecker <brobecker@adacore.com>
113 * config.in, configure: Regenerate.
115 2012-04-09 Mike Frysinger <vapier@gentoo.org>
117 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pint.
118 * configure: Regenerate.
119 * dv-bfin_pint.c, dv-bfin_pint.h: New device model.
120 * machs.c (bf542_dev): Add PINT register blocks.
121 (bf544_dev, bf547_dev): Likewise.
123 (bf54x_port): Add pint/gpio routing.
124 * machs.h (BFIN_MMR_PINT_SIZE): Define.
126 2012-04-09 Mike Frysinger <vapier@gentoo.org>
128 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio2.
129 * configure: Regenerate.
130 * dv-bfin_gpio2.c, dv-bfin_gpio2.h: New device model.
131 * machs.c (bf54x_mem): Delete GPIO mem stub.
132 (bf542_dev): Add GPIO register blocks.
133 (bf544_dev, bf547_dev): Likewise.
134 * machs.h (BFIN_MMR_GPIO2_SIZE): Define.
136 2012-04-09 Robin Getz <robin.getz@analog.com>
138 * bfin-sim.c (decode_dsp32shift_0): Extract the sign for ASHIFT
139 and LSHIFT, and set ASTAT based on the before/after values.
140 Rename "val" to "acc" to be consistent with other code branches.
142 2012-04-09 Robin Getz <robin.getz@analog.com>
144 * bfin-sim.c (sgn_extend): New helper.
145 (decode_dsp32shiftimm_0): Call lshift when newimmag is more
146 than 16, otherwise call ashiftrt. Set ASTAT fields as needed.
147 For accumulator shifts, call new sgn_extend helper.
149 2012-04-08 Mike Frysinger <vapier@gentoo.org>
151 * bfin-sim.c (illegal_instruction_or_combination): New helper.
152 (decode_ProgCtrl_0): Call illegal_instruction_or_combination instead
153 of illegal_instruction.
154 (decode_PushPopReg_0, decode_CCflag_0, decode_CC2dreg_0,
155 decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
156 decode_dspLDST_0, decode_LDST_0, _interp_insn_bfin): Likewise.
157 (decode_PushPopMultiple_0): Call illegal_instruction_combination when
158 PARALLEL_GROUP is not BFIN_PARALLEL_NONE.
159 (decode_CCflag_0, decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0,
160 decode_COMPI2opD_0, decode_COMPI2opP_0): Likewise.
161 (decode_CC2stat_0): Check PARALLEL_GROUP before cbit.
162 (decode_LDSTpmod_0): Call illegal_instruction_combination when
163 PARALLEL_GROUP is BFIN_PARALLEL_GROUP2.
164 (decode_dagMODim_0, decode_dagMODik_0, decode_LDST_0,
165 decode_LDSTiiFP_0, decode_LDSTii_0): Likewise.
167 2012-04-08 Mike Frysinger <vapier@gentoo.org>
169 * bfin-sim.h (bfin_parallel_group): New enum.
170 (bfin_cpu_state): Add new "group" member.
171 (PARALLEL_GROUP): Define.
172 * bfin-sim.c (decode_ProgCtrl_0): Change INSN_LEN check to
174 (decode_CaCTRL_0, decode_PushPopReg_0, decode_ccMV_0, decode_CCflag_0,
175 decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
176 decode_LOGI2op_0, decode_LoopSetup_0, decode_LDIMMhalf_0,
177 decode_CALLa_0, decode_linkage_0): Likewise.
178 (_interp_insn_bfin): Set PARALLEL_GROUP.
179 (interp_insn_bfin): Likewise.
181 2012-04-08 Mike Frysinger <vapier@gentoo.org>
183 * bfin-sim.c (decode_dsp32alu_0): Delete extra space in TRACE_INSN.
185 2012-04-01 Mike Frysinger <vapier@gentoo.org>
187 * bfin-sim.c (_interp_insn_bfin): Call illegal_instruction_combination
188 when INSN_LEN is non-zero before 32bit decode.
190 2012-04-01 Mike Frysinger <vapier@gentoo.org>
192 * bfin-dis.c (fmtconst): Replace decimal handling with a single
193 sprintf call and the '*' field width.
195 2012-04-01 Mike Frysinger <vapier@gentoo.org>
197 * machs.c (bfin_model_map_bfrom): Return when mnum is 535.
199 2012-04-01 Mike Frysinger <vapier@gentoo.org>
201 * interp.c (bfin_user_init): Move auxvt_size decl from top to
202 inside of auxvt check.
204 2012-03-31 Mike Frysinger <vapier@gentoo.org>
206 * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2.
208 2012-03-31 Mike Frysinger <vapier@gentoo.org>
210 * devices.c: Include devices.h.
212 2012-03-24 Mike Frysinger <vapier@gentoo.org>
214 * aclocal.m4, config.in, configure: Regenerate.
216 2012-03-19 Robin Getz <robin.getz@analog.com>
217 Mike Frysinger <vapier@gentoo.org>
219 * bfin-sim.c (lshift): Add an overflow flag. Delete now unused
220 i, j, and tmp vars. Add a new v_i var. Split the overflow logic
221 out from the saturate logic. Do not set V ASTAT bits when working
223 (decode_ALU2op_0): Add new argument to lshift call.
224 (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
227 2012-03-18 Mike Frysinger <vapier@gentoo.org>
229 * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
230 (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
232 (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
234 2012-03-18 Mike Frysinger <vapier@gentoo.org>
236 * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
237 ARRAY_SIZE rather than hardcoded constant.
239 2012-02-04 Mike Frysinger <vapier@gentoo.org>
241 * config.in: Regenerate.
242 * configure: Likewise.
243 * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
244 * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
245 _LINUX_TYPES_H defines.
247 2011-12-03 Mike Frysinger <vapier@gentoo.org>
249 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
250 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
251 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
252 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
253 tstr in the tbuf output.
255 2011-12-03 Mike Frysinger <vapier@gentoo.org>
257 * Makefile.in: Delete all dependency rules.
258 * aclocal.m4, configure: Regenerate.
260 2011-10-19 Mike Frysinger <vapier@gentoo.org>
262 * configure: Regenerate after common/acinclude.m4 update.
264 2011-10-17 Mike Frysinger <vapier@gentoo.org>
266 * configure.ac: Change include to common/acinclude.m4.
267 * aclocal.m4, configure: Regenerate.
269 2011-10-17 Mike Frysinger <vapier@gentoo.org>
271 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
272 call. Replace common.m4 include with SIM_AC_COMMON.
273 * configure: Regenerate.
275 2011-09-28 Mike Frysinger <vapier@gentoo.org>
277 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
279 2011-07-05 Mike Frysinger <vapier@gentoo.org>
281 * interp.c (sim_do_command): Delete.
283 2011-07-01 Mike Frysinger <vapier@gentoo.org>
285 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
286 stat_map_32 and stat_map_64.
287 (cb_libgloss_stat_map_32): New stat map.
288 (stat_map_32, stat_map_64): New stat map pointers.
289 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
290 stat_map_64 to cb_linux_stat_map_64.
291 (bfin_virtual_init): New function.
292 (sim_create_inferior): Call bfin_virtual_init for all other envs.
294 2011-06-22 Mike Frysinger <vapier@gentoo.org>
296 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
297 sc.result2 and dreg 2 to sc.errcode.
299 2011-06-18 Robin Getz <robin.getz@analog.com>
301 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
302 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
303 ASHIFT accumulator insns.
305 2011-06-18 Robin Getz <robin.getz@analog.com>
307 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
308 (lshiftrt): Likewise.
310 2011-06-18 Robin Getz <robin.getz@analog.com>
312 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
313 rather than get_extended_acc in LSHIFT insns.
315 2011-06-18 Robin Getz <robin.getz@analog.com>
317 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
318 Check MM once when mmod is M_FU to match M_TFU better.
320 2011-06-18 Robin Getz <robin.getz@analog.com>
322 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
323 32, perform a left shift. Update the corresponding AV bit. Set
324 AZ when the low 32bits are also zero.
326 2011-06-18 Robin Getz <robin.getz@analog.com>
328 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
329 call lshift only when count is positive. Otherwise, call ashiftrt.
330 With arithmetic right shift insns, call ashiftrt when the value is
331 small enough, otherwise call lshift.
333 2011-06-18 Robin Getz <robin.getz@analog.com>
335 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
336 mmod is M_IH rather than computing the result by hand.
338 2011-06-18 Robin Getz <robin.getz@analog.com>
340 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
341 before saturation, set sat when more cases saturate, and set the
342 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
343 M_W32, change the max values compared against.
344 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
345 when processing MAC1 and pass v_0 when processing MAC0. Combine
346 the results into the V/VS ASTAT bits.
348 2011-06-18 Robin Getz <robin.getz@analog.com>
350 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
351 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
354 2011-06-18 Robin Getz <robin.getz@analog.com>
356 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
357 allow MM to sign extend all the time.
358 (decode_macfunc): Likewise. Drop sign extension of unsigned
361 2011-06-18 Robin Getz <robin.getz@analog.com>
363 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
364 (decode_macfunc): Likewise when mmod is M_IH.
366 2011-06-18 Mike Frysinger <vapier@gentoo.org>
368 * interp.c (sim_create_inferior): Change free to freeargv.
370 2011-06-04 Mike Frysinger <vapier@gentoo.org>
372 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
373 (bf537_port): Define applicable devices with PORT to the glue-or
374 devices instead of SIC.
375 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
376 Only parse reg/type when the device has an address. Move the call
377 to dv_bfin_hw_port_parse up before slash check.
379 2011-06-04 Mike Frysinger <vapier@gentoo.org>
381 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
382 BFIN_SIC_TO_CEC_PORTS definition.
383 (SIC_PORTS): New define.
384 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
385 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
386 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
388 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
389 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
390 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
391 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
392 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
393 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
394 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
395 * machs.c (bfin_port_layout): New structure.
396 (bfin_model_data): Add new "port" and "port_count" members.
397 (PORT, SIC): New defines.
398 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
399 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
400 Move and redefine port layout from dv-bfin_sic.c to here.
401 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
402 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
403 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
404 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
405 bf548_port, bf549_port): New defines.
406 (bfin_model_data): Link in new bfin_port_layout.port member.
407 (dv_bfin_hw_port_parse): New function.
408 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
409 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
410 bfin_sic links with new dv_bfin_hw_port_parse function.
412 2011-06-03 Mike Frysinger <vapier@gentoo.org>
414 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
416 2011-05-25 Mike Frysinger <vapier@gentoo.org>
418 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
420 2011-05-25 Mike Frysinger <vapier@gentoo.org>
422 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
423 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
424 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
425 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
426 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
427 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
428 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
429 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
430 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
431 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
432 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
433 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
434 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
435 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
436 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
437 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
438 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
439 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
440 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
441 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
442 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
443 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
444 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
445 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
446 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
447 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
448 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
449 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
451 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
453 2011-05-25 Mike Frysinger <vapier@gentoo.org>
455 * Makefile.in (dv-bfin_pfmon.o): New target.
456 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
457 * configure: Regenerated.
458 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
459 * machs.c: Add include new bfin_pfmon.h.
460 (bfin_core_dev): Add pfmon.
462 2011-05-25 Mike Frysinger <vapier@gentoo.org>
464 * machs.c (bf526_roms): Add a region with rev of 2.
465 (bf54x_roms): Add regions with rev of 4.
466 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
467 bf54x_l1-0.4.h headers.
468 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
471 2011-05-14 Mike Frysinger <vapier@gentoo.org>
473 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
476 2011-05-14 Mike Frysinger <vapier@gentoo.org>
478 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
479 local uart. When LOOP_ENA is set in mcr, write to the saved byte
480 and count fields of the uart.
481 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
482 and bfin_uart_get_next_byte.
483 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
484 check first, and skip the remaining code when LOOP_ENA is set in mcr.
485 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
486 (bfin_uart_get_next_byte): Likewise.
487 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
488 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
489 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
491 2011-05-09 Mike Frysinger <vapier@gentoo.org>
493 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
494 from uart->lsr before setting them.
496 2011-04-27 Mike Frysinger <vapier@gentoo.org>
498 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
499 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
500 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
501 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
502 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
505 2011-04-26 Mike Frysinger <vapier@gentoo.org>
507 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
508 (bfin_gpio_io_write_buffer): Store the current port state into
509 "data", and call bfin_gpio_forward_ouput when the data or dir
511 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
513 2011-04-26 Mike Frysinger <vapier@gentoo.org>
515 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
516 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
517 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
518 mask a or mask b MMRs are written.
519 (bfin_gpio_port_event): When handling edge gpios, set the bit in
520 int_state, call bfin_gpio_forward_ints, and then clear the bit.
521 When handling level gpios, clear/set the bit in int_state rather
522 than returning immediately. Call bfin_gpio_forward_ints instead
523 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
525 2011-04-16 Mike Frysinger <vapier@gentoo.org>
527 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
528 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
530 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
531 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
533 2011-04-14 Mike Frysinger <vapier@gentoo.org>
535 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
536 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
537 and BYTEUNPACK insns.
539 2011-04-11 Mike Frysinger <vapier@gentoo.org>
541 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
542 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
543 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
544 in the trace output, and call the new bfin_sic_port_event func.
546 2011-04-11 Mike Frysinger <vapier@gentoo.org>
548 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
550 2011-04-01 Mike Frysinger <vapier@gentoo.org>
552 * dv-bfin_otp.c (bfin_otp_ports): Declare.
553 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
555 2011-03-29 Mike Frysinger <vapier@gentoo.org>
557 * configure: Regenerate after common/aclocal.m4 changes.
559 2011-03-28 Robin Getz <robin.getz@analog.com>
561 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
562 and add to casted low 16bits of A0.L and store in val0. Cast high
563 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
564 store in val1. Delete bit checks of val0 and val1.
566 2011-03-26 Robin Getz <robin.getz@analog.com>
568 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
569 the result was 0x80000000 for RND12 subtraction.
571 2011-03-26 Robin Getz <robin.getz@analog.com>
573 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
575 2011-03-24 Mike Frysinger <vapier@gentoo.org>
577 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
578 major code flow point.
579 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
580 before calling hw_port_event on ourselves.
581 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
582 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
583 at the start of the function.
585 2011-03-24 Mike Frysinger <vapier@gentoo.org>
587 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
588 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
589 Invert port->both bit check.
591 2011-03-24 Mike Frysinger <vapier@gentoo.org>
593 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
594 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
596 2011-03-23 Mike Frysinger <vapier@gentoo.org>
598 * TODO: Document some known SIC issues.
600 2011-03-23 Mike Frysinger <vapier@gentoo.org>
602 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
603 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
604 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
605 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
606 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
607 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
608 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
609 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
610 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
611 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
612 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
613 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
614 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
615 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
617 2011-03-23 Mike Frysinger <vapier@gentoo.org>
619 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
621 2011-03-23 Mike Frysinger <vapier@gentoo.org>
623 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
625 2011-03-23 Robin Getz <robin.getz@analog.com>
627 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
628 value for the VIT_MAX insn, and mask off the result when done.
630 2011-03-23 Robin Getz <robin.getz@analog.com>
632 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
633 and set A0 to a0_lo when up_lo is false.
635 2011-03-23 Robin Getz <robin.getz@analog.com>
637 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
638 saturate_s40, and use the v parameter to update the AV bit. Set the
639 AC bit only when the final result is 0.
641 2011-03-23 Mike Frysinger <vapier@gentoo.org>
643 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
644 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
645 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
646 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
647 Encode ids with the ENC macro.
648 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
649 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
650 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
651 (bfin_sic_533_port_event): Delete.
652 (bfin_sic_finish): Call set_hw_port_event with
653 bfin_sic_537_port_event for BF533 and BF59x targets.
655 2011-03-23 Robin Getz <robin.getz@analog.com>
657 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
658 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
660 2011-03-23 Mike Frysinger <vapier@gentoo.org>
662 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
663 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
664 Change bfin_gpio addresses from f/g/h to 5/6/7.
665 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
667 2011-03-17 Mike Frysinger <vapier@gentoo.org>
669 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
670 * configure: Regenerate.
671 * config.in: Regenerate.
672 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
675 2011-03-15 Mike Frysinger <vapier@gentoo.org>
677 * Makefile.in (dv-bfin_gpio.o): New target.
678 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
679 * configure: Regenerate.
680 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
681 * machs.c: Include dv-bfin_gpio.h.
682 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
683 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
684 Delete GPIO memory stubs.
685 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
686 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
688 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
690 2011-03-15 Mike Frysinger <vapier@gentoo.org>
692 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
693 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
694 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
695 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
696 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
697 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
698 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
699 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
700 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
701 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
702 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
703 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
704 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
705 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
706 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
707 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
708 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
710 2011-03-15 Robin Getz <robin.getz@analog.com>
712 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
715 2011-03-15 Robin Getz <robin.getz@analog.com>
717 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
719 2011-03-15 Robin Getz <robin.getz@analog.com>
721 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
722 high bit is set after extract_mult.
723 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
724 functions. Use these to update the AN bit.
726 2011-03-15 Robin Getz <robin.getz@analog.com>
728 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
729 the extract_mult functions. Include these when updating the V, VS,
732 2011-03-15 Robin Getz <robin.getz@analog.com>
734 * bfin-sim.c (astat_names): New global bit array.
735 (decode_CC2stat_0): Delete local astat_name and astat_names.
736 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
737 Print out ASTAT bit values when checking an ASTAT register.
739 2010-03-15 Robin Getz <robin.getz@analog.com>
741 * bfin-sim.c (extract_mult): Handle M_IU.
743 2011-03-05 Mike Frysinger <vapier@gentoo.org>
745 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
746 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
747 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
748 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
749 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
750 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
751 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
752 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
753 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
754 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
755 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
756 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
757 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
758 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
759 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
760 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
761 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
762 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
763 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
764 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
765 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
766 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
767 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
768 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
769 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
770 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
771 tconfig.in: New Blackfin port.