sim/bfin/ChangeLog

   1 2011-06-18  Robin Getz  <robin.getz@analog.com>
   2
   3         * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
   4         allow MM to sign extend all the time.
   5         (decode_macfunc): Likewise.  Drop sign extension of unsigned
   6         values.
   7
   8 2011-06-18  Robin Getz  <robin.getz@analog.com>
   9
  10         * bfin-sim.c (extract_mult): When mmod is M_IH, change the order
  11         from round/saturate to saturate/round/saturate.
  12
  13 2011-06-18  Robin Getz  <robin.getz@analog.com>
  14
  15         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
  16         (decode_macfunc): Likewise when mmod is M_IH.
  17
  18 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
  19
  20         * interp.c (sim_create_inferior): Change free to freeargv.
  21
  22 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  23
  24         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
  25         (bf537_port): Define applicable devices with PORT to the glue-or
  26         devices instead of SIC.
  27         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
  28         Only parse reg/type when the device has an address.  Move the call
  29         to dv_bfin_hw_port_parse up before slash check.
  30
  31 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  32
  33         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
  34         BFIN_SIC_TO_CEC_PORTS definition.
  35         (SIC_PORTS): New define.
  36         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
  37         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
  38         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
  39         Delete old layouts.
  40         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
  41         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
  42         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
  43         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
  44         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
  45         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
  46         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
  47         * machs.c (bfin_port_layout): New structure.
  48         (bfin_model_data): Add new "port" and "port_count" members.
  49         (PORT, SIC): New defines.
  50         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
  51         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
  52         Move and redefine port layout from dv-bfin_sic.c to here.
  53         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
  54         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
  55         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
  56         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
  57         bf548_port, bf549_port): New defines.
  58         (bfin_model_data): Link in new bfin_port_layout.port member.
  59         (dv_bfin_hw_port_parse): New function.
  60         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
  61         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
  62         bfin_sic links with new dv_bfin_hw_port_parse function.
  63
  64 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
  65
  66         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
  67
  68 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  69
  70         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
  71
  72 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  73
  74         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
  75         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
  76         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
  77         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
  78         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
  79         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
  80         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
  81         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
  82         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
  83         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
  84         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
  85         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
  86         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
  87         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
  88         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
  89         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
  90         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
  91         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
  92         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
  93         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
  94         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
  95         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
  96         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
  97         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
  98         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
  99         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
 100         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
 101         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
 102         * machs.h: ... here.
 103         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
 104
 105 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 106
 107         * Makefile.in (dv-bfin_pfmon.o): New target.
 108         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
 109         * configure: Regenerated.
 110         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
 111         * machs.c: Add include new bfin_pfmon.h.
 112         (bfin_core_dev): Add pfmon.
 113
 114 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 115
 116         * machs.c (bf526_roms): Add a region with rev of 2.
 117         (bf54x_roms): Add regions with rev of 4.
 118         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
 119         bf54x_l1-0.4.h headers.
 120         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
 121         New header files.
 122
 123 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 124
 125         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
 126         check for SP reg.
 127
 128 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 129
 130         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
 131         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
 132         and count fields of the uart.
 133         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
 134         and bfin_uart_get_next_byte.
 135         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
 136         check first, and skip the remaining code when LOOP_ENA is set in mcr.
 137         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
 138         (bfin_uart_get_next_byte): Likewise.
 139         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
 140         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
 141         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
 142
 143 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
 144
 145         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
 146         from uart->lsr before setting them.
 147
 148 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
 149
 150         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
 151         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
 152         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
 153         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
 154         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
 155         Likewise.
 156
 157 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 158
 159         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
 160         (bfin_gpio_io_write_buffer): Store the current port state into
 161         "data", and call bfin_gpio_forward_ouput when the data or dir
 162         MMRs are updated.
 163         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
 164
 165 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 166
 167         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
 168         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
 169         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
 170         mask a or mask b MMRs are written.
 171         (bfin_gpio_port_event): When handling edge gpios, set the bit in
 172         int_state, call bfin_gpio_forward_ints, and then clear the bit.
 173         When handling level gpios, clear/set the bit in int_state rather
 174         than returning immediately.  Call bfin_gpio_forward_ints instead
 175         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
 176
 177 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 178
 179         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
 180         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
 181         BYTEUNPACK.
 182         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
 183         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
 184
 185 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
 186
 187         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
 188         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
 189         and BYTEUNPACK insns.
 190
 191 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 192
 193         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
 194         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 195         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
 196         in the trace output, and call the new bfin_sic_port_event func.
 197
 198 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 199
 200         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
 201
 202 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
 203
 204         * dv-bfin_otp.c (bfin_otp_ports): Declare.
 205         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
 206
 207 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 208
 209         * configure: Regenerate after common/aclocal.m4 changes.
 210
 211 2011-03-28  Robin Getz  <robin.getz@analog.com>
 212
 213         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
 214         and add to casted low 16bits of A0.L and store in val0.  Cast high
 215         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
 216         store in val1.  Delete bit checks of val0 and val1.
 217
 218 2011-03-26  Robin Getz  <robin.getz@analog.com>
 219
 220         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
 221         the result was 0x80000000 for RND12 subtraction.
 222
 223 2011-03-26  Robin Getz  <robin.getz@analog.com>
 224
 225         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
 226
 227 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 228
 229         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
 230         major code flow point.
 231         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
 232         before calling hw_port_event on ourselves.
 233         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 234         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
 235         at the start of the function.
 236
 237 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 238
 239         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
 240         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
 241         Invert port->both bit check.
 242
 243 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 244
 245         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
 246         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
 247
 248 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 249
 250         * TODO: Document some known SIC issues.
 251
 252 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 253
 254         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
 255         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
 256         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
 257         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
 258         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
 259         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
 260         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
 261         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
 262         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
 263         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
 264         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
 265         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
 266         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
 267         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
 268
 269 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 270
 271         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
 272
 273 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 274
 275         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
 276
 277 2011-03-23  Robin Getz  <robin.getz@analog.com>
 278
 279         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
 280         value for the VIT_MAX insn, and mask off the result when done.
 281
 282 2011-03-23  Robin Getz  <robin.getz@analog.com>
 283
 284         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
 285         and set A0 to a0_lo when up_lo is false.
 286
 287 2011-03-23  Robin Getz  <robin.getz@analog.com>
 288
 289         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
 290         saturate_s40, and use the v parameter to update the AV bit.  Set the
 291         AC bit only when the final result is 0.
 292
 293 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 294
 295         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
 296         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 297         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 298         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 299         Encode ids with the ENC macro.
 300         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 301         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
 302         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
 303         (bfin_sic_533_port_event): Delete.
 304         (bfin_sic_finish): Call set_hw_port_event with
 305         bfin_sic_537_port_event for BF533 and BF59x targets.
 306
 307 2011-03-23  Robin Getz  <robin.getz@analog.com>
 308
 309         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
 310         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
 311
 312 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 313
 314         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
 315         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
 316         Change bfin_gpio addresses from f/g/h to 5/6/7.
 317         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
 318
 319 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
 320
 321         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
 322         * configure: Regenerate.
 323         * config.in: Regenerate.
 324         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
 325         kill or pread.
 326
 327 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 328
 329         * Makefile.in (dv-bfin_gpio.o): New target.
 330         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
 331         * configure: Regenerate.
 332         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
 333         * machs.c: Include dv-bfin_gpio.h.
 334         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
 335         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
 336         Delete GPIO memory stubs.
 337         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
 338         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
 339         peripheral devices.
 340         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
 341
 342 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 343
 344         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
 345         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
 346         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
 347         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
 348         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
 349         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
 350         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
 351         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
 352         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
 353         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 354         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 355         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
 356         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
 357         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 358         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 359         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
 360         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
 361
 362 2011-03-15  Robin Getz  <robin.getz@analog.com>
 363
 364         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
 365         and subs.
 366
 367 2011-03-15  Robin Getz  <robin.getz@analog.com>
 368
 369         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 370
 371 2011-03-15  Robin Getz  <robin.getz@analog.com>
 372
 373         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 374         high bit is set after extract_mult.
 375         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 376         functions.  Use these to update the AN bit.
 377
 378 2011-03-15  Robin Getz  <robin.getz@analog.com>
 379
 380         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 381         the extract_mult functions.  Include these when updating the V, VS,
 382         and V_COPY bits.
 383
 384 2011-03-15  Robin Getz  <robin.getz@analog.com>
 385
 386         * bfin-sim.c (astat_names): New global bit array.
 387         (decode_CC2stat_0): Delete local astat_name and astat_names.
 388         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 389         Print out ASTAT bit values when checking an ASTAT register.
 390
 391 2010-03-15  Robin Getz  <robin.getz@analog.com>
 392
 393         * bfin-sim.c (extract_mult): Handle M_IU.
 394
 395 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 396
 397         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 398         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 399         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 400         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 401         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 402         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 403         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 404         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 405         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 406         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 407         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 408         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 409         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 410         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 411         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 412         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 413         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 414         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 415         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 416         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 417         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 418         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 419         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 420         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 421         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 422         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 423         tconfig.in: New Blackfin port.