1 2012-04-01 Mike Frysinger <vapier@gentoo.org>
3 * machs.c (bfin_model_map_bfrom): Return when mnum is 535.
5 2012-04-01 Mike Frysinger <vapier@gentoo.org>
7 * interp.c (bfin_user_init): Move auxvt_size decl from top to
10 2012-03-31 Mike Frysinger <vapier@gentoo.org>
12 * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2.
14 2012-03-31 Mike Frysinger <vapier@gentoo.org>
16 * devices.c: Include devices.h.
18 2012-03-24 Mike Frysinger <vapier@gentoo.org>
20 * aclocal.m4, config.in, configure: Regenerate.
22 2012-03-19 Robin Getz <robin.getz@analog.com>
23 Mike Frysinger <vapier@gentoo.org>
25 * bfin-sim.c (lshift): Add an overflow flag. Delete now unused
26 i, j, and tmp vars. Add a new v_i var. Split the overflow logic
27 out from the saturate logic. Do not set V ASTAT bits when working
29 (decode_ALU2op_0): Add new argument to lshift call.
30 (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
33 2012-03-18 Mike Frysinger <vapier@gentoo.org>
35 * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
36 (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
38 (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
40 2012-03-18 Mike Frysinger <vapier@gentoo.org>
42 * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
43 ARRAY_SIZE rather than hardcoded constant.
45 2012-02-04 Mike Frysinger <vapier@gentoo.org>
47 * config.in: Regenerate.
48 * configure: Likewise.
49 * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
50 * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
51 _LINUX_TYPES_H defines.
53 2011-12-03 Mike Frysinger <vapier@gentoo.org>
55 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
56 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
57 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
58 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
59 tstr in the tbuf output.
61 2011-12-03 Mike Frysinger <vapier@gentoo.org>
63 * Makefile.in: Delete all dependency rules.
64 * aclocal.m4, configure: Regenerate.
66 2011-10-19 Mike Frysinger <vapier@gentoo.org>
68 * configure: Regenerate after common/acinclude.m4 update.
70 2011-10-17 Mike Frysinger <vapier@gentoo.org>
72 * configure.ac: Change include to common/acinclude.m4.
73 * aclocal.m4, configure: Regenerate.
75 2011-10-17 Mike Frysinger <vapier@gentoo.org>
77 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
78 call. Replace common.m4 include with SIM_AC_COMMON.
79 * configure: Regenerate.
81 2011-09-28 Mike Frysinger <vapier@gentoo.org>
83 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
85 2011-07-05 Mike Frysinger <vapier@gentoo.org>
87 * interp.c (sim_do_command): Delete.
89 2011-07-01 Mike Frysinger <vapier@gentoo.org>
91 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
92 stat_map_32 and stat_map_64.
93 (cb_libgloss_stat_map_32): New stat map.
94 (stat_map_32, stat_map_64): New stat map pointers.
95 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
96 stat_map_64 to cb_linux_stat_map_64.
97 (bfin_virtual_init): New function.
98 (sim_create_inferior): Call bfin_virtual_init for all other envs.
100 2011-06-22 Mike Frysinger <vapier@gentoo.org>
102 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
103 sc.result2 and dreg 2 to sc.errcode.
105 2011-06-18 Robin Getz <robin.getz@analog.com>
107 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
108 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
109 ASHIFT accumulator insns.
111 2011-06-18 Robin Getz <robin.getz@analog.com>
113 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
114 (lshiftrt): Likewise.
116 2011-06-18 Robin Getz <robin.getz@analog.com>
118 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
119 rather than get_extended_acc in LSHIFT insns.
121 2011-06-18 Robin Getz <robin.getz@analog.com>
123 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
124 Check MM once when mmod is M_FU to match M_TFU better.
126 2011-06-18 Robin Getz <robin.getz@analog.com>
128 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
129 32, perform a left shift. Update the corresponding AV bit. Set
130 AZ when the low 32bits are also zero.
132 2011-06-18 Robin Getz <robin.getz@analog.com>
134 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
135 call lshift only when count is positive. Otherwise, call ashiftrt.
136 With arithmetic right shift insns, call ashiftrt when the value is
137 small enough, otherwise call lshift.
139 2011-06-18 Robin Getz <robin.getz@analog.com>
141 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
142 mmod is M_IH rather than computing the result by hand.
144 2011-06-18 Robin Getz <robin.getz@analog.com>
146 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
147 before saturation, set sat when more cases saturate, and set the
148 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
149 M_W32, change the max values compared against.
150 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
151 when processing MAC1 and pass v_0 when processing MAC0. Combine
152 the results into the V/VS ASTAT bits.
154 2011-06-18 Robin Getz <robin.getz@analog.com>
156 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
157 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
160 2011-06-18 Robin Getz <robin.getz@analog.com>
162 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
163 allow MM to sign extend all the time.
164 (decode_macfunc): Likewise. Drop sign extension of unsigned
167 2011-06-18 Robin Getz <robin.getz@analog.com>
169 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
170 (decode_macfunc): Likewise when mmod is M_IH.
172 2011-06-18 Mike Frysinger <vapier@gentoo.org>
174 * interp.c (sim_create_inferior): Change free to freeargv.
176 2011-06-04 Mike Frysinger <vapier@gentoo.org>
178 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
179 (bf537_port): Define applicable devices with PORT to the glue-or
180 devices instead of SIC.
181 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
182 Only parse reg/type when the device has an address. Move the call
183 to dv_bfin_hw_port_parse up before slash check.
185 2011-06-04 Mike Frysinger <vapier@gentoo.org>
187 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
188 BFIN_SIC_TO_CEC_PORTS definition.
189 (SIC_PORTS): New define.
190 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
191 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
192 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
194 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
195 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
196 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
197 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
198 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
199 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
200 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
201 * machs.c (bfin_port_layout): New structure.
202 (bfin_model_data): Add new "port" and "port_count" members.
203 (PORT, SIC): New defines.
204 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
205 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
206 Move and redefine port layout from dv-bfin_sic.c to here.
207 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
208 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
209 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
210 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
211 bf548_port, bf549_port): New defines.
212 (bfin_model_data): Link in new bfin_port_layout.port member.
213 (dv_bfin_hw_port_parse): New function.
214 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
215 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
216 bfin_sic links with new dv_bfin_hw_port_parse function.
218 2011-06-03 Mike Frysinger <vapier@gentoo.org>
220 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
222 2011-05-25 Mike Frysinger <vapier@gentoo.org>
224 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
226 2011-05-25 Mike Frysinger <vapier@gentoo.org>
228 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
229 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
230 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
231 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
232 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
233 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
234 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
235 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
236 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
237 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
238 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
239 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
240 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
241 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
242 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
243 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
244 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
245 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
246 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
247 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
248 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
249 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
250 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
251 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
252 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
253 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
254 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
255 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
257 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
259 2011-05-25 Mike Frysinger <vapier@gentoo.org>
261 * Makefile.in (dv-bfin_pfmon.o): New target.
262 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
263 * configure: Regenerated.
264 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
265 * machs.c: Add include new bfin_pfmon.h.
266 (bfin_core_dev): Add pfmon.
268 2011-05-25 Mike Frysinger <vapier@gentoo.org>
270 * machs.c (bf526_roms): Add a region with rev of 2.
271 (bf54x_roms): Add regions with rev of 4.
272 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
273 bf54x_l1-0.4.h headers.
274 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
277 2011-05-14 Mike Frysinger <vapier@gentoo.org>
279 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
282 2011-05-14 Mike Frysinger <vapier@gentoo.org>
284 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
285 local uart. When LOOP_ENA is set in mcr, write to the saved byte
286 and count fields of the uart.
287 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
288 and bfin_uart_get_next_byte.
289 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
290 check first, and skip the remaining code when LOOP_ENA is set in mcr.
291 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
292 (bfin_uart_get_next_byte): Likewise.
293 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
294 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
295 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
297 2011-05-09 Mike Frysinger <vapier@gentoo.org>
299 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
300 from uart->lsr before setting them.
302 2011-04-27 Mike Frysinger <vapier@gentoo.org>
304 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
305 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
306 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
307 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
308 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
311 2011-04-26 Mike Frysinger <vapier@gentoo.org>
313 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
314 (bfin_gpio_io_write_buffer): Store the current port state into
315 "data", and call bfin_gpio_forward_ouput when the data or dir
317 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
319 2011-04-26 Mike Frysinger <vapier@gentoo.org>
321 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
322 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
323 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
324 mask a or mask b MMRs are written.
325 (bfin_gpio_port_event): When handling edge gpios, set the bit in
326 int_state, call bfin_gpio_forward_ints, and then clear the bit.
327 When handling level gpios, clear/set the bit in int_state rather
328 than returning immediately. Call bfin_gpio_forward_ints instead
329 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
331 2011-04-16 Mike Frysinger <vapier@gentoo.org>
333 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
334 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
336 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
337 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
339 2011-04-14 Mike Frysinger <vapier@gentoo.org>
341 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
342 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
343 and BYTEUNPACK insns.
345 2011-04-11 Mike Frysinger <vapier@gentoo.org>
347 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
348 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
349 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
350 in the trace output, and call the new bfin_sic_port_event func.
352 2011-04-11 Mike Frysinger <vapier@gentoo.org>
354 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
356 2011-04-01 Mike Frysinger <vapier@gentoo.org>
358 * dv-bfin_otp.c (bfin_otp_ports): Declare.
359 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
361 2011-03-29 Mike Frysinger <vapier@gentoo.org>
363 * configure: Regenerate after common/aclocal.m4 changes.
365 2011-03-28 Robin Getz <robin.getz@analog.com>
367 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
368 and add to casted low 16bits of A0.L and store in val0. Cast high
369 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
370 store in val1. Delete bit checks of val0 and val1.
372 2011-03-26 Robin Getz <robin.getz@analog.com>
374 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
375 the result was 0x80000000 for RND12 subtraction.
377 2011-03-26 Robin Getz <robin.getz@analog.com>
379 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
381 2011-03-24 Mike Frysinger <vapier@gentoo.org>
383 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
384 major code flow point.
385 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
386 before calling hw_port_event on ourselves.
387 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
388 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
389 at the start of the function.
391 2011-03-24 Mike Frysinger <vapier@gentoo.org>
393 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
394 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
395 Invert port->both bit check.
397 2011-03-24 Mike Frysinger <vapier@gentoo.org>
399 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
400 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
402 2011-03-23 Mike Frysinger <vapier@gentoo.org>
404 * TODO: Document some known SIC issues.
406 2011-03-23 Mike Frysinger <vapier@gentoo.org>
408 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
409 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
410 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
411 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
412 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
413 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
414 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
415 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
416 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
417 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
418 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
419 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
420 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
421 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
423 2011-03-23 Mike Frysinger <vapier@gentoo.org>
425 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
427 2011-03-23 Mike Frysinger <vapier@gentoo.org>
429 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
431 2011-03-23 Robin Getz <robin.getz@analog.com>
433 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
434 value for the VIT_MAX insn, and mask off the result when done.
436 2011-03-23 Robin Getz <robin.getz@analog.com>
438 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
439 and set A0 to a0_lo when up_lo is false.
441 2011-03-23 Robin Getz <robin.getz@analog.com>
443 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
444 saturate_s40, and use the v parameter to update the AV bit. Set the
445 AC bit only when the final result is 0.
447 2011-03-23 Mike Frysinger <vapier@gentoo.org>
449 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
450 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
451 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
452 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
453 Encode ids with the ENC macro.
454 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
455 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
456 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
457 (bfin_sic_533_port_event): Delete.
458 (bfin_sic_finish): Call set_hw_port_event with
459 bfin_sic_537_port_event for BF533 and BF59x targets.
461 2011-03-23 Robin Getz <robin.getz@analog.com>
463 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
464 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
466 2011-03-23 Mike Frysinger <vapier@gentoo.org>
468 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
469 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
470 Change bfin_gpio addresses from f/g/h to 5/6/7.
471 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
473 2011-03-17 Mike Frysinger <vapier@gentoo.org>
475 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
476 * configure: Regenerate.
477 * config.in: Regenerate.
478 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
481 2011-03-15 Mike Frysinger <vapier@gentoo.org>
483 * Makefile.in (dv-bfin_gpio.o): New target.
484 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
485 * configure: Regenerate.
486 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
487 * machs.c: Include dv-bfin_gpio.h.
488 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
489 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
490 Delete GPIO memory stubs.
491 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
492 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
494 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
496 2011-03-15 Mike Frysinger <vapier@gentoo.org>
498 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
499 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
500 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
501 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
502 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
503 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
504 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
505 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
506 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
507 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
508 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
509 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
510 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
511 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
512 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
513 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
514 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
516 2011-03-15 Robin Getz <robin.getz@analog.com>
518 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
521 2011-03-15 Robin Getz <robin.getz@analog.com>
523 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
525 2011-03-15 Robin Getz <robin.getz@analog.com>
527 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
528 high bit is set after extract_mult.
529 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
530 functions. Use these to update the AN bit.
532 2011-03-15 Robin Getz <robin.getz@analog.com>
534 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
535 the extract_mult functions. Include these when updating the V, VS,
538 2011-03-15 Robin Getz <robin.getz@analog.com>
540 * bfin-sim.c (astat_names): New global bit array.
541 (decode_CC2stat_0): Delete local astat_name and astat_names.
542 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
543 Print out ASTAT bit values when checking an ASTAT register.
545 2010-03-15 Robin Getz <robin.getz@analog.com>
547 * bfin-sim.c (extract_mult): Handle M_IU.
549 2011-03-05 Mike Frysinger <vapier@gentoo.org>
551 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
552 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
553 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
554 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
555 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
556 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
557 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
558 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
559 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
560 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
561 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
562 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
563 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
564 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
565 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
566 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
567 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
568 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
569 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
570 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
571 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
572 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
573 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
574 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
575 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
576 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
577 tconfig.in: New Blackfin port.