1 2011-06-18 Robin Getz <robin.getz@analog.com>
3 * bfin-sim.c (saturate_s40_astat): Change ">" to ">=".
4 (decode_macfunc): Likewise when mmod is M_IH.
6 2011-06-18 Mike Frysinger <vapier@gentoo.org>
8 * interp.c (sim_create_inferior): Change free to freeargv.
10 2011-06-04 Mike Frysinger <vapier@gentoo.org>
12 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
13 (bf537_port): Define applicable devices with PORT to the glue-or
14 devices instead of SIC.
15 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
16 Only parse reg/type when the device has an address. Move the call
17 to dv_bfin_hw_port_parse up before slash check.
19 2011-06-04 Mike Frysinger <vapier@gentoo.org>
21 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
22 BFIN_SIC_TO_CEC_PORTS definition.
23 (SIC_PORTS): New define.
24 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
25 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
26 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
28 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
29 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
30 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
31 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
32 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
33 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
34 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
35 * machs.c (bfin_port_layout): New structure.
36 (bfin_model_data): Add new "port" and "port_count" members.
37 (PORT, SIC): New defines.
38 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
39 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
40 Move and redefine port layout from dv-bfin_sic.c to here.
41 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
42 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
43 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
44 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
45 bf548_port, bf549_port): New defines.
46 (bfin_model_data): Link in new bfin_port_layout.port member.
47 (dv_bfin_hw_port_parse): New function.
48 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
49 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
50 bfin_sic links with new dv_bfin_hw_port_parse function.
52 2011-06-03 Mike Frysinger <vapier@gentoo.org>
54 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
56 2011-05-25 Mike Frysinger <vapier@gentoo.org>
58 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
60 2011-05-25 Mike Frysinger <vapier@gentoo.org>
62 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
63 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
64 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
65 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
66 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
67 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
68 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
69 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
70 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
71 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
72 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
73 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
74 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
75 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
76 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
77 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
78 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
79 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
80 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
81 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
82 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
83 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
84 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
85 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
86 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
87 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
88 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
89 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
91 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
93 2011-05-25 Mike Frysinger <vapier@gentoo.org>
95 * Makefile.in (dv-bfin_pfmon.o): New target.
96 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
97 * configure: Regenerated.
98 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
99 * machs.c: Add include new bfin_pfmon.h.
100 (bfin_core_dev): Add pfmon.
102 2011-05-25 Mike Frysinger <vapier@gentoo.org>
104 * machs.c (bf526_roms): Add a region with rev of 2.
105 (bf54x_roms): Add regions with rev of 4.
106 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
107 bf54x_l1-0.4.h headers.
108 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
111 2011-05-14 Mike Frysinger <vapier@gentoo.org>
113 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
116 2011-05-14 Mike Frysinger <vapier@gentoo.org>
118 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
119 local uart. When LOOP_ENA is set in mcr, write to the saved byte
120 and count fields of the uart.
121 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
122 and bfin_uart_get_next_byte.
123 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
124 check first, and skip the remaining code when LOOP_ENA is set in mcr.
125 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
126 (bfin_uart_get_next_byte): Likewise.
127 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
128 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
129 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
131 2011-05-09 Mike Frysinger <vapier@gentoo.org>
133 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
134 from uart->lsr before setting them.
136 2011-04-27 Mike Frysinger <vapier@gentoo.org>
138 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
139 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
140 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
141 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
142 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
145 2011-04-26 Mike Frysinger <vapier@gentoo.org>
147 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
148 (bfin_gpio_io_write_buffer): Store the current port state into
149 "data", and call bfin_gpio_forward_ouput when the data or dir
151 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
153 2011-04-26 Mike Frysinger <vapier@gentoo.org>
155 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
156 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
157 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
158 mask a or mask b MMRs are written.
159 (bfin_gpio_port_event): When handling edge gpios, set the bit in
160 int_state, call bfin_gpio_forward_ints, and then clear the bit.
161 When handling level gpios, clear/set the bit in int_state rather
162 than returning immediately. Call bfin_gpio_forward_ints instead
163 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
165 2011-04-16 Mike Frysinger <vapier@gentoo.org>
167 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
168 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
170 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
171 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
173 2011-04-14 Mike Frysinger <vapier@gentoo.org>
175 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
176 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
177 and BYTEUNPACK insns.
179 2011-04-11 Mike Frysinger <vapier@gentoo.org>
181 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
182 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
183 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
184 in the trace output, and call the new bfin_sic_port_event func.
186 2011-04-11 Mike Frysinger <vapier@gentoo.org>
188 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
190 2011-04-01 Mike Frysinger <vapier@gentoo.org>
192 * dv-bfin_otp.c (bfin_otp_ports): Declare.
193 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
195 2011-03-29 Mike Frysinger <vapier@gentoo.org>
197 * configure: Regenerate after common/aclocal.m4 changes.
199 2011-03-28 Robin Getz <robin.getz@analog.com>
201 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
202 and add to casted low 16bits of A0.L and store in val0. Cast high
203 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
204 store in val1. Delete bit checks of val0 and val1.
206 2011-03-26 Robin Getz <robin.getz@analog.com>
208 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
209 the result was 0x80000000 for RND12 subtraction.
211 2011-03-26 Robin Getz <robin.getz@analog.com>
213 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
215 2011-03-24 Mike Frysinger <vapier@gentoo.org>
217 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
218 major code flow point.
219 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
220 before calling hw_port_event on ourselves.
221 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
222 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
223 at the start of the function.
225 2011-03-24 Mike Frysinger <vapier@gentoo.org>
227 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
228 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
229 Invert port->both bit check.
231 2011-03-24 Mike Frysinger <vapier@gentoo.org>
233 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
234 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
236 2011-03-23 Mike Frysinger <vapier@gentoo.org>
238 * TODO: Document some known SIC issues.
240 2011-03-23 Mike Frysinger <vapier@gentoo.org>
242 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
243 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
244 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
245 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
246 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
247 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
248 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
249 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
250 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
251 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
252 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
253 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
254 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
255 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
257 2011-03-23 Mike Frysinger <vapier@gentoo.org>
259 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
261 2011-03-23 Mike Frysinger <vapier@gentoo.org>
263 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
265 2011-03-23 Robin Getz <robin.getz@analog.com>
267 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
268 value for the VIT_MAX insn, and mask off the result when done.
270 2011-03-23 Robin Getz <robin.getz@analog.com>
272 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
273 and set A0 to a0_lo when up_lo is false.
275 2011-03-23 Robin Getz <robin.getz@analog.com>
277 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
278 saturate_s40, and use the v parameter to update the AV bit. Set the
279 AC bit only when the final result is 0.
281 2011-03-23 Mike Frysinger <vapier@gentoo.org>
283 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
284 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
285 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
286 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
287 Encode ids with the ENC macro.
288 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
289 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
290 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
291 (bfin_sic_533_port_event): Delete.
292 (bfin_sic_finish): Call set_hw_port_event with
293 bfin_sic_537_port_event for BF533 and BF59x targets.
295 2011-03-23 Robin Getz <robin.getz@analog.com>
297 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
298 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
300 2011-03-23 Mike Frysinger <vapier@gentoo.org>
302 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
303 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
304 Change bfin_gpio addresses from f/g/h to 5/6/7.
305 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
307 2011-03-17 Mike Frysinger <vapier@gentoo.org>
309 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
310 * configure: Regenerate.
311 * config.in: Regenerate.
312 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
315 2011-03-15 Mike Frysinger <vapier@gentoo.org>
317 * Makefile.in (dv-bfin_gpio.o): New target.
318 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
319 * configure: Regenerate.
320 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
321 * machs.c: Include dv-bfin_gpio.h.
322 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
323 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
324 Delete GPIO memory stubs.
325 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
326 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
328 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
330 2011-03-15 Mike Frysinger <vapier@gentoo.org>
332 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
333 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
334 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
335 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
336 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
337 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
338 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
339 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
340 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
341 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
342 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
343 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
344 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
345 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
346 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
347 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
348 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
350 2011-03-15 Robin Getz <robin.getz@analog.com>
352 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
355 2011-03-15 Robin Getz <robin.getz@analog.com>
357 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
359 2011-03-15 Robin Getz <robin.getz@analog.com>
361 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
362 high bit is set after extract_mult.
363 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
364 functions. Use these to update the AN bit.
366 2011-03-15 Robin Getz <robin.getz@analog.com>
368 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
369 the extract_mult functions. Include these when updating the V, VS,
372 2011-03-15 Robin Getz <robin.getz@analog.com>
374 * bfin-sim.c (astat_names): New global bit array.
375 (decode_CC2stat_0): Delete local astat_name and astat_names.
376 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
377 Print out ASTAT bit values when checking an ASTAT register.
379 2010-03-15 Robin Getz <robin.getz@analog.com>
381 * bfin-sim.c (extract_mult): Handle M_IU.
383 2011-03-05 Mike Frysinger <vapier@gentoo.org>
385 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
386 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
387 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
388 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
389 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
390 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
391 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
392 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
393 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
394 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
395 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
396 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
397 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
398 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
399 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
400 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
401 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
402 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
403 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
404 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
405 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
406 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
407 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
408 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
409 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
410 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
411 tconfig.in: New Blackfin port.