sim/bfin/ChangeLog

   1 2011-06-18  Robin Getz  <robin.getz@analog.com>
   2
   3         * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
   4         (lshiftrt): Likewise.
   5
   6 2011-06-18  Robin Getz  <robin.getz@analog.com>
   7
   8         * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
   9         rather than get_extended_acc in LSHIFT insns.
  10
  11 2011-06-18  Robin Getz  <robin.getz@analog.com>
  12
  13         * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
  14         Check MM once when mmod is M_FU to match M_TFU better.
  15
  16 2011-06-18  Robin Getz  <robin.getz@analog.com>
  17
  18         * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
  19         32, perform a left shift.  Update the corresponding AV bit.  Set
  20         AZ when the low 32bits are also zero.
  21
  22 2011-06-18  Robin Getz  <robin.getz@analog.com>
  23
  24         * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
  25         call lshift only when count is positive.  Otherwise, call ashiftrt.
  26         With arithmetic right shift insns, call ashiftrt when the value is
  27         small enough, otherwise call lshift.
  28
  29 2011-06-18  Robin Getz  <robin.getz@analog.com>
  30
  31         * bfin-sim.c (extract_mult): Call saturate_s16 directly when
  32         mmod is M_IH rather than computing the result by hand.
  33
  34 2011-06-18  Robin Getz  <robin.getz@analog.com>
  35
  36         * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
  37         before saturation, set sat when more cases saturate, and set the
  38         overflow bit based on these results.  For M_TFU, M_IU, M_FU, and
  39         M_W32, change the max values compared against.
  40         (decode_dsp32mac_0): Delete v_i and add v_0 and v_1.  Pass v_1
  41         when processing MAC1 and pass v_0 when processing MAC0.  Combine
  42         the results into the V/VS ASTAT bits.
  43
  44 2011-06-18  Robin Getz  <robin.getz@analog.com>
  45
  46         * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
  47         and mmod is M_IU.  Call saturate_s16 when MM is set and mmod
  48         is M_TFU.
  49
  50 2011-06-18  Robin Getz  <robin.getz@analog.com>
  51
  52         * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
  53         allow MM to sign extend all the time.
  54         (decode_macfunc): Likewise.  Drop sign extension of unsigned
  55         values.
  56
  57 2011-06-18  Robin Getz  <robin.getz@analog.com>
  58
  59         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
  60         (decode_macfunc): Likewise when mmod is M_IH.
  61
  62 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
  63
  64         * interp.c (sim_create_inferior): Change free to freeargv.
  65
  66 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  67
  68         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
  69         (bf537_port): Define applicable devices with PORT to the glue-or
  70         devices instead of SIC.
  71         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
  72         Only parse reg/type when the device has an address.  Move the call
  73         to dv_bfin_hw_port_parse up before slash check.
  74
  75 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  76
  77         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
  78         BFIN_SIC_TO_CEC_PORTS definition.
  79         (SIC_PORTS): New define.
  80         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
  81         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
  82         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
  83         Delete old layouts.
  84         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
  85         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
  86         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
  87         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
  88         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
  89         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
  90         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
  91         * machs.c (bfin_port_layout): New structure.
  92         (bfin_model_data): Add new "port" and "port_count" members.
  93         (PORT, SIC): New defines.
  94         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
  95         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
  96         Move and redefine port layout from dv-bfin_sic.c to here.
  97         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
  98         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
  99         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
 100         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
 101         bf548_port, bf549_port): New defines.
 102         (bfin_model_data): Link in new bfin_port_layout.port member.
 103         (dv_bfin_hw_port_parse): New function.
 104         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
 105         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
 106         bfin_sic links with new dv_bfin_hw_port_parse function.
 107
 108 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
 109
 110         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
 111
 112 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 113
 114         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
 115
 116 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 117
 118         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
 119         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
 120         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
 121         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
 122         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
 123         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
 124         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
 125         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
 126         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
 127         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
 128         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
 129         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
 130         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
 131         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
 132         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
 133         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
 134         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
 135         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
 136         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
 137         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
 138         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
 139         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
 140         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
 141         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
 142         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
 143         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
 144         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
 145         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
 146         * machs.h: ... here.
 147         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
 148
 149 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 150
 151         * Makefile.in (dv-bfin_pfmon.o): New target.
 152         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
 153         * configure: Regenerated.
 154         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
 155         * machs.c: Add include new bfin_pfmon.h.
 156         (bfin_core_dev): Add pfmon.
 157
 158 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 159
 160         * machs.c (bf526_roms): Add a region with rev of 2.
 161         (bf54x_roms): Add regions with rev of 4.
 162         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
 163         bf54x_l1-0.4.h headers.
 164         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
 165         New header files.
 166
 167 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 168
 169         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
 170         check for SP reg.
 171
 172 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 173
 174         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
 175         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
 176         and count fields of the uart.
 177         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
 178         and bfin_uart_get_next_byte.
 179         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
 180         check first, and skip the remaining code when LOOP_ENA is set in mcr.
 181         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
 182         (bfin_uart_get_next_byte): Likewise.
 183         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
 184         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
 185         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
 186
 187 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
 188
 189         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
 190         from uart->lsr before setting them.
 191
 192 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
 193
 194         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
 195         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
 196         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
 197         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
 198         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
 199         Likewise.
 200
 201 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 202
 203         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
 204         (bfin_gpio_io_write_buffer): Store the current port state into
 205         "data", and call bfin_gpio_forward_ouput when the data or dir
 206         MMRs are updated.
 207         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
 208
 209 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 210
 211         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
 212         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
 213         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
 214         mask a or mask b MMRs are written.
 215         (bfin_gpio_port_event): When handling edge gpios, set the bit in
 216         int_state, call bfin_gpio_forward_ints, and then clear the bit.
 217         When handling level gpios, clear/set the bit in int_state rather
 218         than returning immediately.  Call bfin_gpio_forward_ints instead
 219         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
 220
 221 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 222
 223         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
 224         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
 225         BYTEUNPACK.
 226         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
 227         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
 228
 229 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
 230
 231         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
 232         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
 233         and BYTEUNPACK insns.
 234
 235 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 236
 237         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
 238         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 239         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
 240         in the trace output, and call the new bfin_sic_port_event func.
 241
 242 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 243
 244         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
 245
 246 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
 247
 248         * dv-bfin_otp.c (bfin_otp_ports): Declare.
 249         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
 250
 251 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 252
 253         * configure: Regenerate after common/aclocal.m4 changes.
 254
 255 2011-03-28  Robin Getz  <robin.getz@analog.com>
 256
 257         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
 258         and add to casted low 16bits of A0.L and store in val0.  Cast high
 259         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
 260         store in val1.  Delete bit checks of val0 and val1.
 261
 262 2011-03-26  Robin Getz  <robin.getz@analog.com>
 263
 264         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
 265         the result was 0x80000000 for RND12 subtraction.
 266
 267 2011-03-26  Robin Getz  <robin.getz@analog.com>
 268
 269         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
 270
 271 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 272
 273         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
 274         major code flow point.
 275         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
 276         before calling hw_port_event on ourselves.
 277         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 278         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
 279         at the start of the function.
 280
 281 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 282
 283         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
 284         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
 285         Invert port->both bit check.
 286
 287 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 288
 289         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
 290         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
 291
 292 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 293
 294         * TODO: Document some known SIC issues.
 295
 296 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 297
 298         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
 299         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
 300         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
 301         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
 302         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
 303         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
 304         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
 305         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
 306         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
 307         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
 308         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
 309         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
 310         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
 311         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
 312
 313 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 314
 315         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
 316
 317 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 318
 319         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
 320
 321 2011-03-23  Robin Getz  <robin.getz@analog.com>
 322
 323         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
 324         value for the VIT_MAX insn, and mask off the result when done.
 325
 326 2011-03-23  Robin Getz  <robin.getz@analog.com>
 327
 328         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
 329         and set A0 to a0_lo when up_lo is false.
 330
 331 2011-03-23  Robin Getz  <robin.getz@analog.com>
 332
 333         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
 334         saturate_s40, and use the v parameter to update the AV bit.  Set the
 335         AC bit only when the final result is 0.
 336
 337 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 338
 339         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
 340         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 341         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 342         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 343         Encode ids with the ENC macro.
 344         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 345         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
 346         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
 347         (bfin_sic_533_port_event): Delete.
 348         (bfin_sic_finish): Call set_hw_port_event with
 349         bfin_sic_537_port_event for BF533 and BF59x targets.
 350
 351 2011-03-23  Robin Getz  <robin.getz@analog.com>
 352
 353         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
 354         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
 355
 356 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 357
 358         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
 359         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
 360         Change bfin_gpio addresses from f/g/h to 5/6/7.
 361         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
 362
 363 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
 364
 365         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
 366         * configure: Regenerate.
 367         * config.in: Regenerate.
 368         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
 369         kill or pread.
 370
 371 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 372
 373         * Makefile.in (dv-bfin_gpio.o): New target.
 374         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
 375         * configure: Regenerate.
 376         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
 377         * machs.c: Include dv-bfin_gpio.h.
 378         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
 379         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
 380         Delete GPIO memory stubs.
 381         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
 382         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
 383         peripheral devices.
 384         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
 385
 386 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 387
 388         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
 389         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
 390         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
 391         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
 392         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
 393         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
 394         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
 395         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
 396         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
 397         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 398         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 399         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
 400         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
 401         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 402         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 403         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
 404         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
 405
 406 2011-03-15  Robin Getz  <robin.getz@analog.com>
 407
 408         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
 409         and subs.
 410
 411 2011-03-15  Robin Getz  <robin.getz@analog.com>
 412
 413         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 414
 415 2011-03-15  Robin Getz  <robin.getz@analog.com>
 416
 417         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 418         high bit is set after extract_mult.
 419         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 420         functions.  Use these to update the AN bit.
 421
 422 2011-03-15  Robin Getz  <robin.getz@analog.com>
 423
 424         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 425         the extract_mult functions.  Include these when updating the V, VS,
 426         and V_COPY bits.
 427
 428 2011-03-15  Robin Getz  <robin.getz@analog.com>
 429
 430         * bfin-sim.c (astat_names): New global bit array.
 431         (decode_CC2stat_0): Delete local astat_name and astat_names.
 432         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 433         Print out ASTAT bit values when checking an ASTAT register.
 434
 435 2010-03-15  Robin Getz  <robin.getz@analog.com>
 436
 437         * bfin-sim.c (extract_mult): Handle M_IU.
 438
 439 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 440
 441         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 442         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 443         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 444         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 445         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 446         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 447         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 448         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 449         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 450         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 451         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 452         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 453         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 454         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 455         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 456         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 457         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 458         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 459         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 460         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 461         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 462         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 463         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 464         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 465         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 466         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 467         tconfig.in: New Blackfin port.