1 2011-07-01 Mike Frysinger <vapier@gentoo.org>
3 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
4 stat_map_32 and stat_map_64.
5 (cb_libgloss_stat_map_32): New stat map.
6 (stat_map_32, stat_map_64): New stat map pointers.
7 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
8 stat_map_64 to cb_linux_stat_map_64.
9 (bfin_virtual_init): New function.
10 (sim_create_inferior): Call bfin_virtual_init for all other envs.
12 2011-06-22 Mike Frysinger <vapier@gentoo.org>
14 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
15 sc.result2 and dreg 2 to sc.errcode.
17 2011-06-18 Robin Getz <robin.getz@analog.com>
19 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
20 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
21 ASHIFT accumulator insns.
23 2011-06-18 Robin Getz <robin.getz@analog.com>
25 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
28 2011-06-18 Robin Getz <robin.getz@analog.com>
30 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
31 rather than get_extended_acc in LSHIFT insns.
33 2011-06-18 Robin Getz <robin.getz@analog.com>
35 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
36 Check MM once when mmod is M_FU to match M_TFU better.
38 2011-06-18 Robin Getz <robin.getz@analog.com>
40 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
41 32, perform a left shift. Update the corresponding AV bit. Set
42 AZ when the low 32bits are also zero.
44 2011-06-18 Robin Getz <robin.getz@analog.com>
46 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
47 call lshift only when count is positive. Otherwise, call ashiftrt.
48 With arithmetic right shift insns, call ashiftrt when the value is
49 small enough, otherwise call lshift.
51 2011-06-18 Robin Getz <robin.getz@analog.com>
53 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
54 mmod is M_IH rather than computing the result by hand.
56 2011-06-18 Robin Getz <robin.getz@analog.com>
58 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
59 before saturation, set sat when more cases saturate, and set the
60 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
61 M_W32, change the max values compared against.
62 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
63 when processing MAC1 and pass v_0 when processing MAC0. Combine
64 the results into the V/VS ASTAT bits.
66 2011-06-18 Robin Getz <robin.getz@analog.com>
68 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
69 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
72 2011-06-18 Robin Getz <robin.getz@analog.com>
74 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
75 allow MM to sign extend all the time.
76 (decode_macfunc): Likewise. Drop sign extension of unsigned
79 2011-06-18 Robin Getz <robin.getz@analog.com>
81 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
82 (decode_macfunc): Likewise when mmod is M_IH.
84 2011-06-18 Mike Frysinger <vapier@gentoo.org>
86 * interp.c (sim_create_inferior): Change free to freeargv.
88 2011-06-04 Mike Frysinger <vapier@gentoo.org>
90 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
91 (bf537_port): Define applicable devices with PORT to the glue-or
92 devices instead of SIC.
93 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
94 Only parse reg/type when the device has an address. Move the call
95 to dv_bfin_hw_port_parse up before slash check.
97 2011-06-04 Mike Frysinger <vapier@gentoo.org>
99 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
100 BFIN_SIC_TO_CEC_PORTS definition.
101 (SIC_PORTS): New define.
102 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
103 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
104 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
106 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
107 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
108 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
109 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
110 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
111 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
112 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
113 * machs.c (bfin_port_layout): New structure.
114 (bfin_model_data): Add new "port" and "port_count" members.
115 (PORT, SIC): New defines.
116 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
117 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
118 Move and redefine port layout from dv-bfin_sic.c to here.
119 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
120 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
121 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
122 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
123 bf548_port, bf549_port): New defines.
124 (bfin_model_data): Link in new bfin_port_layout.port member.
125 (dv_bfin_hw_port_parse): New function.
126 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
127 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
128 bfin_sic links with new dv_bfin_hw_port_parse function.
130 2011-06-03 Mike Frysinger <vapier@gentoo.org>
132 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
134 2011-05-25 Mike Frysinger <vapier@gentoo.org>
136 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
138 2011-05-25 Mike Frysinger <vapier@gentoo.org>
140 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
141 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
142 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
143 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
144 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
145 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
146 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
147 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
148 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
149 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
150 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
151 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
152 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
153 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
154 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
155 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
156 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
157 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
158 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
159 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
160 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
161 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
162 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
163 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
164 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
165 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
166 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
167 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
169 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
171 2011-05-25 Mike Frysinger <vapier@gentoo.org>
173 * Makefile.in (dv-bfin_pfmon.o): New target.
174 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
175 * configure: Regenerated.
176 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
177 * machs.c: Add include new bfin_pfmon.h.
178 (bfin_core_dev): Add pfmon.
180 2011-05-25 Mike Frysinger <vapier@gentoo.org>
182 * machs.c (bf526_roms): Add a region with rev of 2.
183 (bf54x_roms): Add regions with rev of 4.
184 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
185 bf54x_l1-0.4.h headers.
186 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
189 2011-05-14 Mike Frysinger <vapier@gentoo.org>
191 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
194 2011-05-14 Mike Frysinger <vapier@gentoo.org>
196 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
197 local uart. When LOOP_ENA is set in mcr, write to the saved byte
198 and count fields of the uart.
199 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
200 and bfin_uart_get_next_byte.
201 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
202 check first, and skip the remaining code when LOOP_ENA is set in mcr.
203 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
204 (bfin_uart_get_next_byte): Likewise.
205 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
206 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
207 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
209 2011-05-09 Mike Frysinger <vapier@gentoo.org>
211 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
212 from uart->lsr before setting them.
214 2011-04-27 Mike Frysinger <vapier@gentoo.org>
216 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
217 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
218 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
219 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
220 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
223 2011-04-26 Mike Frysinger <vapier@gentoo.org>
225 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
226 (bfin_gpio_io_write_buffer): Store the current port state into
227 "data", and call bfin_gpio_forward_ouput when the data or dir
229 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
231 2011-04-26 Mike Frysinger <vapier@gentoo.org>
233 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
234 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
235 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
236 mask a or mask b MMRs are written.
237 (bfin_gpio_port_event): When handling edge gpios, set the bit in
238 int_state, call bfin_gpio_forward_ints, and then clear the bit.
239 When handling level gpios, clear/set the bit in int_state rather
240 than returning immediately. Call bfin_gpio_forward_ints instead
241 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
243 2011-04-16 Mike Frysinger <vapier@gentoo.org>
245 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
246 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
248 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
249 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
251 2011-04-14 Mike Frysinger <vapier@gentoo.org>
253 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
254 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
255 and BYTEUNPACK insns.
257 2011-04-11 Mike Frysinger <vapier@gentoo.org>
259 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
260 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
261 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
262 in the trace output, and call the new bfin_sic_port_event func.
264 2011-04-11 Mike Frysinger <vapier@gentoo.org>
266 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
268 2011-04-01 Mike Frysinger <vapier@gentoo.org>
270 * dv-bfin_otp.c (bfin_otp_ports): Declare.
271 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
273 2011-03-29 Mike Frysinger <vapier@gentoo.org>
275 * configure: Regenerate after common/aclocal.m4 changes.
277 2011-03-28 Robin Getz <robin.getz@analog.com>
279 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
280 and add to casted low 16bits of A0.L and store in val0. Cast high
281 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
282 store in val1. Delete bit checks of val0 and val1.
284 2011-03-26 Robin Getz <robin.getz@analog.com>
286 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
287 the result was 0x80000000 for RND12 subtraction.
289 2011-03-26 Robin Getz <robin.getz@analog.com>
291 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
293 2011-03-24 Mike Frysinger <vapier@gentoo.org>
295 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
296 major code flow point.
297 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
298 before calling hw_port_event on ourselves.
299 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
300 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
301 at the start of the function.
303 2011-03-24 Mike Frysinger <vapier@gentoo.org>
305 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
306 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
307 Invert port->both bit check.
309 2011-03-24 Mike Frysinger <vapier@gentoo.org>
311 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
312 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
314 2011-03-23 Mike Frysinger <vapier@gentoo.org>
316 * TODO: Document some known SIC issues.
318 2011-03-23 Mike Frysinger <vapier@gentoo.org>
320 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
321 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
322 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
323 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
324 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
325 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
326 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
327 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
328 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
329 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
330 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
331 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
332 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
333 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
335 2011-03-23 Mike Frysinger <vapier@gentoo.org>
337 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
339 2011-03-23 Mike Frysinger <vapier@gentoo.org>
341 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
343 2011-03-23 Robin Getz <robin.getz@analog.com>
345 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
346 value for the VIT_MAX insn, and mask off the result when done.
348 2011-03-23 Robin Getz <robin.getz@analog.com>
350 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
351 and set A0 to a0_lo when up_lo is false.
353 2011-03-23 Robin Getz <robin.getz@analog.com>
355 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
356 saturate_s40, and use the v parameter to update the AV bit. Set the
357 AC bit only when the final result is 0.
359 2011-03-23 Mike Frysinger <vapier@gentoo.org>
361 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
362 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
363 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
364 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
365 Encode ids with the ENC macro.
366 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
367 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
368 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
369 (bfin_sic_533_port_event): Delete.
370 (bfin_sic_finish): Call set_hw_port_event with
371 bfin_sic_537_port_event for BF533 and BF59x targets.
373 2011-03-23 Robin Getz <robin.getz@analog.com>
375 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
376 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
378 2011-03-23 Mike Frysinger <vapier@gentoo.org>
380 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
381 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
382 Change bfin_gpio addresses from f/g/h to 5/6/7.
383 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
385 2011-03-17 Mike Frysinger <vapier@gentoo.org>
387 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
388 * configure: Regenerate.
389 * config.in: Regenerate.
390 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
393 2011-03-15 Mike Frysinger <vapier@gentoo.org>
395 * Makefile.in (dv-bfin_gpio.o): New target.
396 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
397 * configure: Regenerate.
398 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
399 * machs.c: Include dv-bfin_gpio.h.
400 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
401 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
402 Delete GPIO memory stubs.
403 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
404 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
406 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
408 2011-03-15 Mike Frysinger <vapier@gentoo.org>
410 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
411 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
412 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
413 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
414 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
415 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
416 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
417 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
418 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
419 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
420 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
421 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
422 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
423 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
424 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
425 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
426 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
428 2011-03-15 Robin Getz <robin.getz@analog.com>
430 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
433 2011-03-15 Robin Getz <robin.getz@analog.com>
435 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
437 2011-03-15 Robin Getz <robin.getz@analog.com>
439 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
440 high bit is set after extract_mult.
441 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
442 functions. Use these to update the AN bit.
444 2011-03-15 Robin Getz <robin.getz@analog.com>
446 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
447 the extract_mult functions. Include these when updating the V, VS,
450 2011-03-15 Robin Getz <robin.getz@analog.com>
452 * bfin-sim.c (astat_names): New global bit array.
453 (decode_CC2stat_0): Delete local astat_name and astat_names.
454 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
455 Print out ASTAT bit values when checking an ASTAT register.
457 2010-03-15 Robin Getz <robin.getz@analog.com>
459 * bfin-sim.c (extract_mult): Handle M_IU.
461 2011-03-05 Mike Frysinger <vapier@gentoo.org>
463 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
464 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
465 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
466 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
467 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
468 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
469 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
470 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
471 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
472 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
473 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
474 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
475 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
476 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
477 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
478 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
479 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
480 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
481 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
482 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
483 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
484 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
485 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
486 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
487 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
488 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
489 tconfig.in: New Blackfin port.