1 2012-03-31 Mike Frysinger <vapier@gentoo.org>
3 * devices.c: Include devices.h.
5 2012-03-24 Mike Frysinger <vapier@gentoo.org>
7 * aclocal.m4, config.in, configure: Regenerate.
9 2012-03-19 Robin Getz <robin.getz@analog.com>
10 Mike Frysinger <vapier@gentoo.org>
12 * bfin-sim.c (lshift): Add an overflow flag. Delete now unused
13 i, j, and tmp vars. Add a new v_i var. Split the overflow logic
14 out from the saturate logic. Do not set V ASTAT bits when working
16 (decode_ALU2op_0): Add new argument to lshift call.
17 (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
20 2012-03-18 Mike Frysinger <vapier@gentoo.org>
22 * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
23 (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
25 (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
27 2012-03-18 Mike Frysinger <vapier@gentoo.org>
29 * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
30 ARRAY_SIZE rather than hardcoded constant.
32 2012-02-04 Mike Frysinger <vapier@gentoo.org>
34 * config.in: Regenerate.
35 * configure: Likewise.
36 * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
37 * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
38 _LINUX_TYPES_H defines.
40 2011-12-03 Mike Frysinger <vapier@gentoo.org>
42 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
43 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
44 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
45 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
46 tstr in the tbuf output.
48 2011-12-03 Mike Frysinger <vapier@gentoo.org>
50 * Makefile.in: Delete all dependency rules.
51 * aclocal.m4, configure: Regenerate.
53 2011-10-19 Mike Frysinger <vapier@gentoo.org>
55 * configure: Regenerate after common/acinclude.m4 update.
57 2011-10-17 Mike Frysinger <vapier@gentoo.org>
59 * configure.ac: Change include to common/acinclude.m4.
60 * aclocal.m4, configure: Regenerate.
62 2011-10-17 Mike Frysinger <vapier@gentoo.org>
64 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
65 call. Replace common.m4 include with SIM_AC_COMMON.
66 * configure: Regenerate.
68 2011-09-28 Mike Frysinger <vapier@gentoo.org>
70 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
72 2011-07-05 Mike Frysinger <vapier@gentoo.org>
74 * interp.c (sim_do_command): Delete.
76 2011-07-01 Mike Frysinger <vapier@gentoo.org>
78 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
79 stat_map_32 and stat_map_64.
80 (cb_libgloss_stat_map_32): New stat map.
81 (stat_map_32, stat_map_64): New stat map pointers.
82 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
83 stat_map_64 to cb_linux_stat_map_64.
84 (bfin_virtual_init): New function.
85 (sim_create_inferior): Call bfin_virtual_init for all other envs.
87 2011-06-22 Mike Frysinger <vapier@gentoo.org>
89 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
90 sc.result2 and dreg 2 to sc.errcode.
92 2011-06-18 Robin Getz <robin.getz@analog.com>
94 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
95 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
96 ASHIFT accumulator insns.
98 2011-06-18 Robin Getz <robin.getz@analog.com>
100 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
101 (lshiftrt): Likewise.
103 2011-06-18 Robin Getz <robin.getz@analog.com>
105 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
106 rather than get_extended_acc in LSHIFT insns.
108 2011-06-18 Robin Getz <robin.getz@analog.com>
110 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
111 Check MM once when mmod is M_FU to match M_TFU better.
113 2011-06-18 Robin Getz <robin.getz@analog.com>
115 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
116 32, perform a left shift. Update the corresponding AV bit. Set
117 AZ when the low 32bits are also zero.
119 2011-06-18 Robin Getz <robin.getz@analog.com>
121 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
122 call lshift only when count is positive. Otherwise, call ashiftrt.
123 With arithmetic right shift insns, call ashiftrt when the value is
124 small enough, otherwise call lshift.
126 2011-06-18 Robin Getz <robin.getz@analog.com>
128 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
129 mmod is M_IH rather than computing the result by hand.
131 2011-06-18 Robin Getz <robin.getz@analog.com>
133 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
134 before saturation, set sat when more cases saturate, and set the
135 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
136 M_W32, change the max values compared against.
137 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
138 when processing MAC1 and pass v_0 when processing MAC0. Combine
139 the results into the V/VS ASTAT bits.
141 2011-06-18 Robin Getz <robin.getz@analog.com>
143 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
144 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
147 2011-06-18 Robin Getz <robin.getz@analog.com>
149 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
150 allow MM to sign extend all the time.
151 (decode_macfunc): Likewise. Drop sign extension of unsigned
154 2011-06-18 Robin Getz <robin.getz@analog.com>
156 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
157 (decode_macfunc): Likewise when mmod is M_IH.
159 2011-06-18 Mike Frysinger <vapier@gentoo.org>
161 * interp.c (sim_create_inferior): Change free to freeargv.
163 2011-06-04 Mike Frysinger <vapier@gentoo.org>
165 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
166 (bf537_port): Define applicable devices with PORT to the glue-or
167 devices instead of SIC.
168 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
169 Only parse reg/type when the device has an address. Move the call
170 to dv_bfin_hw_port_parse up before slash check.
172 2011-06-04 Mike Frysinger <vapier@gentoo.org>
174 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
175 BFIN_SIC_TO_CEC_PORTS definition.
176 (SIC_PORTS): New define.
177 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
178 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
179 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
181 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
182 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
183 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
184 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
185 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
186 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
187 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
188 * machs.c (bfin_port_layout): New structure.
189 (bfin_model_data): Add new "port" and "port_count" members.
190 (PORT, SIC): New defines.
191 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
192 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
193 Move and redefine port layout from dv-bfin_sic.c to here.
194 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
195 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
196 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
197 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
198 bf548_port, bf549_port): New defines.
199 (bfin_model_data): Link in new bfin_port_layout.port member.
200 (dv_bfin_hw_port_parse): New function.
201 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
202 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
203 bfin_sic links with new dv_bfin_hw_port_parse function.
205 2011-06-03 Mike Frysinger <vapier@gentoo.org>
207 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
209 2011-05-25 Mike Frysinger <vapier@gentoo.org>
211 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
213 2011-05-25 Mike Frysinger <vapier@gentoo.org>
215 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
216 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
217 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
218 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
219 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
220 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
221 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
222 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
223 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
224 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
225 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
226 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
227 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
228 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
229 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
230 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
231 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
232 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
233 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
234 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
235 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
236 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
237 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
238 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
239 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
240 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
241 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
242 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
244 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
246 2011-05-25 Mike Frysinger <vapier@gentoo.org>
248 * Makefile.in (dv-bfin_pfmon.o): New target.
249 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
250 * configure: Regenerated.
251 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
252 * machs.c: Add include new bfin_pfmon.h.
253 (bfin_core_dev): Add pfmon.
255 2011-05-25 Mike Frysinger <vapier@gentoo.org>
257 * machs.c (bf526_roms): Add a region with rev of 2.
258 (bf54x_roms): Add regions with rev of 4.
259 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
260 bf54x_l1-0.4.h headers.
261 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
264 2011-05-14 Mike Frysinger <vapier@gentoo.org>
266 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
269 2011-05-14 Mike Frysinger <vapier@gentoo.org>
271 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
272 local uart. When LOOP_ENA is set in mcr, write to the saved byte
273 and count fields of the uart.
274 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
275 and bfin_uart_get_next_byte.
276 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
277 check first, and skip the remaining code when LOOP_ENA is set in mcr.
278 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
279 (bfin_uart_get_next_byte): Likewise.
280 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
281 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
282 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
284 2011-05-09 Mike Frysinger <vapier@gentoo.org>
286 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
287 from uart->lsr before setting them.
289 2011-04-27 Mike Frysinger <vapier@gentoo.org>
291 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
292 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
293 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
294 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
295 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
298 2011-04-26 Mike Frysinger <vapier@gentoo.org>
300 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
301 (bfin_gpio_io_write_buffer): Store the current port state into
302 "data", and call bfin_gpio_forward_ouput when the data or dir
304 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
306 2011-04-26 Mike Frysinger <vapier@gentoo.org>
308 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
309 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
310 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
311 mask a or mask b MMRs are written.
312 (bfin_gpio_port_event): When handling edge gpios, set the bit in
313 int_state, call bfin_gpio_forward_ints, and then clear the bit.
314 When handling level gpios, clear/set the bit in int_state rather
315 than returning immediately. Call bfin_gpio_forward_ints instead
316 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
318 2011-04-16 Mike Frysinger <vapier@gentoo.org>
320 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
321 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
323 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
324 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
326 2011-04-14 Mike Frysinger <vapier@gentoo.org>
328 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
329 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
330 and BYTEUNPACK insns.
332 2011-04-11 Mike Frysinger <vapier@gentoo.org>
334 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
335 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
336 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
337 in the trace output, and call the new bfin_sic_port_event func.
339 2011-04-11 Mike Frysinger <vapier@gentoo.org>
341 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
343 2011-04-01 Mike Frysinger <vapier@gentoo.org>
345 * dv-bfin_otp.c (bfin_otp_ports): Declare.
346 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
348 2011-03-29 Mike Frysinger <vapier@gentoo.org>
350 * configure: Regenerate after common/aclocal.m4 changes.
352 2011-03-28 Robin Getz <robin.getz@analog.com>
354 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
355 and add to casted low 16bits of A0.L and store in val0. Cast high
356 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
357 store in val1. Delete bit checks of val0 and val1.
359 2011-03-26 Robin Getz <robin.getz@analog.com>
361 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
362 the result was 0x80000000 for RND12 subtraction.
364 2011-03-26 Robin Getz <robin.getz@analog.com>
366 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
368 2011-03-24 Mike Frysinger <vapier@gentoo.org>
370 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
371 major code flow point.
372 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
373 before calling hw_port_event on ourselves.
374 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
375 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
376 at the start of the function.
378 2011-03-24 Mike Frysinger <vapier@gentoo.org>
380 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
381 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
382 Invert port->both bit check.
384 2011-03-24 Mike Frysinger <vapier@gentoo.org>
386 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
387 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
389 2011-03-23 Mike Frysinger <vapier@gentoo.org>
391 * TODO: Document some known SIC issues.
393 2011-03-23 Mike Frysinger <vapier@gentoo.org>
395 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
396 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
397 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
398 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
399 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
400 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
401 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
402 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
403 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
404 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
405 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
406 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
407 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
408 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
410 2011-03-23 Mike Frysinger <vapier@gentoo.org>
412 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
414 2011-03-23 Mike Frysinger <vapier@gentoo.org>
416 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
418 2011-03-23 Robin Getz <robin.getz@analog.com>
420 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
421 value for the VIT_MAX insn, and mask off the result when done.
423 2011-03-23 Robin Getz <robin.getz@analog.com>
425 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
426 and set A0 to a0_lo when up_lo is false.
428 2011-03-23 Robin Getz <robin.getz@analog.com>
430 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
431 saturate_s40, and use the v parameter to update the AV bit. Set the
432 AC bit only when the final result is 0.
434 2011-03-23 Mike Frysinger <vapier@gentoo.org>
436 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
437 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
438 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
439 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
440 Encode ids with the ENC macro.
441 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
442 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
443 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
444 (bfin_sic_533_port_event): Delete.
445 (bfin_sic_finish): Call set_hw_port_event with
446 bfin_sic_537_port_event for BF533 and BF59x targets.
448 2011-03-23 Robin Getz <robin.getz@analog.com>
450 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
451 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
453 2011-03-23 Mike Frysinger <vapier@gentoo.org>
455 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
456 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
457 Change bfin_gpio addresses from f/g/h to 5/6/7.
458 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
460 2011-03-17 Mike Frysinger <vapier@gentoo.org>
462 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
463 * configure: Regenerate.
464 * config.in: Regenerate.
465 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
468 2011-03-15 Mike Frysinger <vapier@gentoo.org>
470 * Makefile.in (dv-bfin_gpio.o): New target.
471 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
472 * configure: Regenerate.
473 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
474 * machs.c: Include dv-bfin_gpio.h.
475 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
476 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
477 Delete GPIO memory stubs.
478 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
479 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
481 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
483 2011-03-15 Mike Frysinger <vapier@gentoo.org>
485 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
486 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
487 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
488 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
489 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
490 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
491 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
492 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
493 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
494 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
495 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
496 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
497 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
498 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
499 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
500 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
501 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
503 2011-03-15 Robin Getz <robin.getz@analog.com>
505 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
508 2011-03-15 Robin Getz <robin.getz@analog.com>
510 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
512 2011-03-15 Robin Getz <robin.getz@analog.com>
514 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
515 high bit is set after extract_mult.
516 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
517 functions. Use these to update the AN bit.
519 2011-03-15 Robin Getz <robin.getz@analog.com>
521 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
522 the extract_mult functions. Include these when updating the V, VS,
525 2011-03-15 Robin Getz <robin.getz@analog.com>
527 * bfin-sim.c (astat_names): New global bit array.
528 (decode_CC2stat_0): Delete local astat_name and astat_names.
529 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
530 Print out ASTAT bit values when checking an ASTAT register.
532 2010-03-15 Robin Getz <robin.getz@analog.com>
534 * bfin-sim.c (extract_mult): Handle M_IU.
536 2011-03-05 Mike Frysinger <vapier@gentoo.org>
538 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
539 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
540 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
541 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
542 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
543 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
544 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
545 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
546 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
547 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
548 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
549 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
550 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
551 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
552 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
553 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
554 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
555 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
556 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
557 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
558 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
559 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
560 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
561 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
562 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
563 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
564 tconfig.in: New Blackfin port.