sim/bfin/ChangeLog

   1 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
   4
   5 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
   8
   9 2011-03-23  Robin Getz  <robin.getz@analog.com>
  10
  11         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
  12         value for the VIT_MAX insn, and mask off the result when done.
  13
  14 2011-03-23  Robin Getz  <robin.getz@analog.com>
  15
  16         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
  17         and set A0 to a0_lo when up_lo is false.
  18
  19 2011-03-23  Robin Getz  <robin.getz@analog.com>
  20
  21         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
  22         saturate_s40, and use the v parameter to update the AV bit.  Set the
  23         AC bit only when the final result is 0.
  24
  25 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
  26
  27         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
  28         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
  29         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
  30         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
  31         Encode ids with the ENC macro.
  32         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
  33         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
  34         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
  35         (bfin_sic_533_port_event): Delete.
  36         (bfin_sic_finish): Call set_hw_port_event with
  37         bfin_sic_537_port_event for BF533 and BF59x targets.
  38
  39 2011-03-23  Robin Getz  <robin.getz@analog.com>
  40
  41         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
  42         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
  43
  44 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
  45
  46         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
  47         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
  48         Change bfin_gpio addresses from f/g/h to 5/6/7.
  49         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
  50
  51 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
  52
  53         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
  54         * configure: Regenerate.
  55         * config.in: Regenerate.
  56         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
  57         kill or pread.
  58
  59 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
  60
  61         * Makefile.in (dv-bfin_gpio.o): New target.
  62         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
  63         * configure: Regenerate.
  64         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
  65         * machs.c: Include dv-bfin_gpio.h.
  66         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
  67         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
  68         Delete GPIO memory stubs.
  69         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
  70         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
  71         peripheral devices.
  72         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
  73
  74 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
  75
  76         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
  77         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
  78         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
  79         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
  80         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
  81         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
  82         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
  83         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
  84         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
  85         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
  86         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
  87         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
  88         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
  89         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
  90         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
  91         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
  92         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
  93
  94 2011-03-15  Robin Getz  <robin.getz@analog.com>
  95
  96         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
  97         and subs.
  98
  99 2011-03-15  Robin Getz  <robin.getz@analog.com>
 100
 101         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 102
 103 2011-03-15  Robin Getz  <robin.getz@analog.com>
 104
 105         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 106         high bit is set after extract_mult.
 107         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 108         functions.  Use these to update the AN bit.
 109
 110 2011-03-15  Robin Getz  <robin.getz@analog.com>
 111
 112         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 113         the extract_mult functions.  Include these when updating the V, VS,
 114         and V_COPY bits.
 115
 116 2011-03-15  Robin Getz  <robin.getz@analog.com>
 117
 118         * bfin-sim.c (astat_names): New global bit array.
 119         (decode_CC2stat_0): Delete local astat_name and astat_names.
 120         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 121         Print out ASTAT bit values when checking an ASTAT register.
 122
 123 2010-03-15  Robin Getz  <robin.getz@analog.com>
 124
 125         * bfin-sim.c (extract_mult): Handle M_IU.
 126
 127 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 128
 129         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 130         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 131         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 132         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 133         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 134         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 135         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 136         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 137         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 138         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 139         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 140         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 141         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 142         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 143         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 144         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 145         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 146         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 147         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 148         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 149         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 150         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 151         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 152         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 153         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 154         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 155         tconfig.in: New Blackfin port.