1 2011-06-18 Robin Getz <robin.getz@analog.com>
3 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
4 mmod is M_IH rather than computing the result by hand.
6 2011-06-18 Robin Getz <robin.getz@analog.com>
8 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
9 before saturation, set sat when more cases saturate, and set the
10 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
11 M_W32, change the max values compared against.
12 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
13 when processing MAC1 and pass v_0 when processing MAC0. Combine
14 the results into the V/VS ASTAT bits.
16 2011-06-18 Robin Getz <robin.getz@analog.com>
18 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
19 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
22 2011-06-18 Robin Getz <robin.getz@analog.com>
24 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
25 allow MM to sign extend all the time.
26 (decode_macfunc): Likewise. Drop sign extension of unsigned
29 2011-06-18 Robin Getz <robin.getz@analog.com>
31 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
32 (decode_macfunc): Likewise when mmod is M_IH.
34 2011-06-18 Mike Frysinger <vapier@gentoo.org>
36 * interp.c (sim_create_inferior): Change free to freeargv.
38 2011-06-04 Mike Frysinger <vapier@gentoo.org>
40 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
41 (bf537_port): Define applicable devices with PORT to the glue-or
42 devices instead of SIC.
43 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
44 Only parse reg/type when the device has an address. Move the call
45 to dv_bfin_hw_port_parse up before slash check.
47 2011-06-04 Mike Frysinger <vapier@gentoo.org>
49 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
50 BFIN_SIC_TO_CEC_PORTS definition.
51 (SIC_PORTS): New define.
52 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
53 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
54 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
56 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
57 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
58 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
59 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
60 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
61 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
62 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
63 * machs.c (bfin_port_layout): New structure.
64 (bfin_model_data): Add new "port" and "port_count" members.
65 (PORT, SIC): New defines.
66 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
67 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
68 Move and redefine port layout from dv-bfin_sic.c to here.
69 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
70 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
71 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
72 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
73 bf548_port, bf549_port): New defines.
74 (bfin_model_data): Link in new bfin_port_layout.port member.
75 (dv_bfin_hw_port_parse): New function.
76 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
77 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
78 bfin_sic links with new dv_bfin_hw_port_parse function.
80 2011-06-03 Mike Frysinger <vapier@gentoo.org>
82 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
84 2011-05-25 Mike Frysinger <vapier@gentoo.org>
86 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
88 2011-05-25 Mike Frysinger <vapier@gentoo.org>
90 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
91 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
92 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
93 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
94 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
95 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
96 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
97 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
98 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
99 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
100 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
101 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
102 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
103 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
104 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
105 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
106 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
107 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
108 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
109 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
110 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
111 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
112 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
113 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
114 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
115 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
116 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
117 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
119 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
121 2011-05-25 Mike Frysinger <vapier@gentoo.org>
123 * Makefile.in (dv-bfin_pfmon.o): New target.
124 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
125 * configure: Regenerated.
126 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
127 * machs.c: Add include new bfin_pfmon.h.
128 (bfin_core_dev): Add pfmon.
130 2011-05-25 Mike Frysinger <vapier@gentoo.org>
132 * machs.c (bf526_roms): Add a region with rev of 2.
133 (bf54x_roms): Add regions with rev of 4.
134 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
135 bf54x_l1-0.4.h headers.
136 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
139 2011-05-14 Mike Frysinger <vapier@gentoo.org>
141 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
144 2011-05-14 Mike Frysinger <vapier@gentoo.org>
146 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
147 local uart. When LOOP_ENA is set in mcr, write to the saved byte
148 and count fields of the uart.
149 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
150 and bfin_uart_get_next_byte.
151 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
152 check first, and skip the remaining code when LOOP_ENA is set in mcr.
153 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
154 (bfin_uart_get_next_byte): Likewise.
155 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
156 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
157 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
159 2011-05-09 Mike Frysinger <vapier@gentoo.org>
161 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
162 from uart->lsr before setting them.
164 2011-04-27 Mike Frysinger <vapier@gentoo.org>
166 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
167 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
168 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
169 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
170 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
173 2011-04-26 Mike Frysinger <vapier@gentoo.org>
175 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
176 (bfin_gpio_io_write_buffer): Store the current port state into
177 "data", and call bfin_gpio_forward_ouput when the data or dir
179 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
181 2011-04-26 Mike Frysinger <vapier@gentoo.org>
183 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
184 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
185 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
186 mask a or mask b MMRs are written.
187 (bfin_gpio_port_event): When handling edge gpios, set the bit in
188 int_state, call bfin_gpio_forward_ints, and then clear the bit.
189 When handling level gpios, clear/set the bit in int_state rather
190 than returning immediately. Call bfin_gpio_forward_ints instead
191 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
193 2011-04-16 Mike Frysinger <vapier@gentoo.org>
195 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
196 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
198 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
199 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
201 2011-04-14 Mike Frysinger <vapier@gentoo.org>
203 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
204 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
205 and BYTEUNPACK insns.
207 2011-04-11 Mike Frysinger <vapier@gentoo.org>
209 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
210 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
211 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
212 in the trace output, and call the new bfin_sic_port_event func.
214 2011-04-11 Mike Frysinger <vapier@gentoo.org>
216 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
218 2011-04-01 Mike Frysinger <vapier@gentoo.org>
220 * dv-bfin_otp.c (bfin_otp_ports): Declare.
221 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
223 2011-03-29 Mike Frysinger <vapier@gentoo.org>
225 * configure: Regenerate after common/aclocal.m4 changes.
227 2011-03-28 Robin Getz <robin.getz@analog.com>
229 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
230 and add to casted low 16bits of A0.L and store in val0. Cast high
231 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
232 store in val1. Delete bit checks of val0 and val1.
234 2011-03-26 Robin Getz <robin.getz@analog.com>
236 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
237 the result was 0x80000000 for RND12 subtraction.
239 2011-03-26 Robin Getz <robin.getz@analog.com>
241 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
243 2011-03-24 Mike Frysinger <vapier@gentoo.org>
245 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
246 major code flow point.
247 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
248 before calling hw_port_event on ourselves.
249 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
250 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
251 at the start of the function.
253 2011-03-24 Mike Frysinger <vapier@gentoo.org>
255 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
256 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
257 Invert port->both bit check.
259 2011-03-24 Mike Frysinger <vapier@gentoo.org>
261 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
262 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
264 2011-03-23 Mike Frysinger <vapier@gentoo.org>
266 * TODO: Document some known SIC issues.
268 2011-03-23 Mike Frysinger <vapier@gentoo.org>
270 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
271 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
272 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
273 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
274 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
275 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
276 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
277 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
278 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
279 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
280 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
281 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
282 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
283 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
285 2011-03-23 Mike Frysinger <vapier@gentoo.org>
287 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
289 2011-03-23 Mike Frysinger <vapier@gentoo.org>
291 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
293 2011-03-23 Robin Getz <robin.getz@analog.com>
295 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
296 value for the VIT_MAX insn, and mask off the result when done.
298 2011-03-23 Robin Getz <robin.getz@analog.com>
300 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
301 and set A0 to a0_lo when up_lo is false.
303 2011-03-23 Robin Getz <robin.getz@analog.com>
305 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
306 saturate_s40, and use the v parameter to update the AV bit. Set the
307 AC bit only when the final result is 0.
309 2011-03-23 Mike Frysinger <vapier@gentoo.org>
311 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
312 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
313 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
314 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
315 Encode ids with the ENC macro.
316 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
317 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
318 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
319 (bfin_sic_533_port_event): Delete.
320 (bfin_sic_finish): Call set_hw_port_event with
321 bfin_sic_537_port_event for BF533 and BF59x targets.
323 2011-03-23 Robin Getz <robin.getz@analog.com>
325 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
326 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
328 2011-03-23 Mike Frysinger <vapier@gentoo.org>
330 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
331 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
332 Change bfin_gpio addresses from f/g/h to 5/6/7.
333 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
335 2011-03-17 Mike Frysinger <vapier@gentoo.org>
337 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
338 * configure: Regenerate.
339 * config.in: Regenerate.
340 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
343 2011-03-15 Mike Frysinger <vapier@gentoo.org>
345 * Makefile.in (dv-bfin_gpio.o): New target.
346 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
347 * configure: Regenerate.
348 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
349 * machs.c: Include dv-bfin_gpio.h.
350 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
351 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
352 Delete GPIO memory stubs.
353 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
354 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
356 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
358 2011-03-15 Mike Frysinger <vapier@gentoo.org>
360 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
361 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
362 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
363 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
364 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
365 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
366 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
367 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
368 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
369 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
370 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
371 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
372 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
373 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
374 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
375 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
376 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
378 2011-03-15 Robin Getz <robin.getz@analog.com>
380 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
383 2011-03-15 Robin Getz <robin.getz@analog.com>
385 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
387 2011-03-15 Robin Getz <robin.getz@analog.com>
389 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
390 high bit is set after extract_mult.
391 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
392 functions. Use these to update the AN bit.
394 2011-03-15 Robin Getz <robin.getz@analog.com>
396 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
397 the extract_mult functions. Include these when updating the V, VS,
400 2011-03-15 Robin Getz <robin.getz@analog.com>
402 * bfin-sim.c (astat_names): New global bit array.
403 (decode_CC2stat_0): Delete local astat_name and astat_names.
404 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
405 Print out ASTAT bit values when checking an ASTAT register.
407 2010-03-15 Robin Getz <robin.getz@analog.com>
409 * bfin-sim.c (extract_mult): Handle M_IU.
411 2011-03-05 Mike Frysinger <vapier@gentoo.org>
413 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
414 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
415 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
416 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
417 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
418 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
419 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
420 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
421 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
422 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
423 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
424 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
425 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
426 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
427 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
428 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
429 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
430 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
431 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
432 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
433 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
434 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
435 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
436 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
437 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
438 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
439 tconfig.in: New Blackfin port.