sim/bfin/ChangeLog

   1 2015-12-25  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * Makefile.in (SIM_OBJS): Delete sim-model.o.
   4         * tconfig.h (SIM_HAVE_MODEL): Delete.
   5
   6 2015-12-25  Mike Frysinger  <vapier@gentoo.org>
   7
   8         * machs.c: Rename MACH to SIM_MACH, MACH_IMP_PROPERTIES to
   9         SIM_MACH_IMP_PROPERTIES, and MODEL to SIM_MODEL.
  10
  11 2015-12-25  Mike Frysinger  <vapier@gentoo.org>
  12
  13         * devices.c (device_error): Delete.
  14
  15 2015-12-24  Mike Frysinger  <vapier@gentoo.org>
  16
  17         * tconfig.h (SIM_HANDLES_LMA): Delete.
  18
  19 2015-11-17  Mike Frysinger  <vapier@gentoo.org>
  20
  21         * tconfig.h (WITH_MODULO_MEMORY): Delete.
  22
  23 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
  24
  25         * Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
  26         sim-stop.o.
  27
  28 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
  29
  30         * interp.c (sim_close): Delete.
  31
  32 2015-10-11  Mike Frysinger  <vapier@gentoo.org>
  33
  34         PR sim/18407
  35         * bfin-sim.c (decode_dsp32shiftimm_0): Call ashiftrt when count
  36         is less than 0.
  37
  38 2015-06-24  Mike Frysinger  <vapier@gentoo.org>
  39
  40         * interp.c (trace_register): Delete.
  41         * sim-main.h (trace_register, TRACE_REGISTER, TRACE_REG): Delete.
  42
  43 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
  44
  45         * configure: Regenerate.
  46
  47 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
  48
  49         * interp.c: Include sim-syscall.h.
  50         (syscall_read_mem, syscall_write_mem): Delete.
  51         (bfin_syscall): Change syscall_read_mem/syscall_write_mem to
  52         sim_syscall_read_mem/sim_syscall_write_mem.
  53
  54 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
  55
  56         * linux-targ-map.h: Update example comments.
  57         (cb_linux_syscall_map): Fill out name field.
  58         (cb_linux_errno_map, cb_linux_open_map, cb_linux_signal_map):
  59         Likewise.
  60
  61 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  62
  63         * interp.c: Expand comment on CB_SYS_xxx defines.
  64
  65 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  66
  67         * configure: Regenerate.
  68
  69 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  70
  71         * configure: Regenerate.
  72
  73 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  74
  75         * bfin-sim.c (hwloop_get_next_pc): Change TRACE_BRANCH to
  76         BFIN_TRACE_BRANCH.
  77         (decode_ProgCtrl_0, decode_BRCC_0, decode_UJUMP_0, decode_CALLa_0):
  78         Likewise.
  79         * bfin-sim.h (__PUT_MEM, __GET_MEM): Change TRACE_CORE to
  80         BFIN_TRACE_CORE.
  81         * dv-bfin_cec.c (_cec_raise, cec_latch, cec_return): Change
  82         TRACE_BRANCH to BFIN_TRACE_BRANCH.
  83         * interp.c (syscall_read_mem, syscall_write_mem): Change MAYBE_TRACE
  84         to TRACE_CORE.
  85         * sim-main.h (MAYBE_TRACE, TRACE_INSN, TRACE_DECODE, TRACE_EXTRACT,
  86         TRACE_SYSCALL, TRACE_EVENTS): Delete.
  87         (TRACE_CORE): Rename to ...
  88         (BFIN_TRACE_CORE): ... this.  Change MAYBE_TRACE to TRACE_CORE.
  89         (TRACE_BRANCH): Rename to ...
  90         (BFIN_TRACE_BRANCH): ... this.  Change MAYBE_TRACE to TRACE_BRANCH.
  91
  92 2015-04-24  David Binderman  <dcb314@hotmail.com>
  93             Nick Clifton  <nickc@redhat.com>
  94
  95         PR 18273
  96         * bfin-sim.c (decode_dsp32alu_0): Remove spurious check for
  97         s == 1.
  98
  99 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 100
 101         * sim-main.h (SIM_CPU): Add note to clean this up.
 102
 103 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 104
 105         * sim-main.h (sim_cia): Delete.
 106
 107 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
 108
 109         * sim-main.h (CIA_GET, CIA_SET): Delete.
 110
 111 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
 112
 113         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
 114         * sim-main.h (STATE_CPU): Delete.
 115
 116 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 117
 118         * configure: Regenerate.
 119
 120 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
 121
 122         * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
 123
 124 2015-04-01  Mike Frysinger  <vapier@gentoo.org>
 125
 126         * Makefile.in (SIM_OBJS): Delete $(SIM_EXTRA_OBJS).
 127
 128 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 129
 130         * config.in, configure: Regenerate.
 131
 132 2015-03-24  Mike Frysinger  <vapier@gentoo.org>
 133
 134         * configure: Regenerate.
 135
 136 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 137
 138         * configure: Regenerate.
 139
 140 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 141
 142         * configure: Regenerate.
 143         * configure.ac (BFIN_SIM_EXTRA_OBJS): Delete.
 144         * Makefile.in (SIM_OBJS): Delete @BFIN_SIM_EXTRA_OBJS@.
 145
 146 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 147
 148         * dv-bfin_uart.c [!HAVE_DV_SOCKSER] (dv_sockser_status,
 149         dv_sockser_write, dv_sockser_read): Delete.
 150
 151 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 152
 153         * sim-main.h: Delete run-sim.h include.
 154
 155 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 156
 157         * aclocal.m4, config.in, configure: Regenerate.
 158         * tconfig.in: Rename file ...
 159         * tconfig.h: ... here.
 160
 161 2015-03-15  Mike Frysinger  <vapier@gentoo.org>
 162
 163         * tconfig.in: Delete includes.
 164         [HAVE_DV_SOCKSER]: Delete.
 165
 166 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 167
 168         * bfin-sim.c (decode_dsp32alu_0): Change v to bu32.
 169
 170 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 171
 172         * Makefile.in (SIM_RUN_OBJS): Delete.
 173
 174 2015-03-10  Mike Frysinger  <vapier@gentoo.org>
 175
 176         PR sim/13160
 177         * Makefile.in ($(srcdir)/linux-fixed-code.h): Put a ; after the
 178         print sed command for BSD compatibility.
 179
 180 2015-03-08  Mike Frysinger  <vapier@gentoo.org>
 181
 182         PR sim/13160
 183         * Makefile.in ($(srcdir)/linux-fixed-code.h): Specify the asm input
 184         directly rather than use $<.  Move the file name to the end of the
 185         sed command to be POSIX compliant.
 186
 187 2014-08-19  Alan Modra  <amodra@gmail.com>
 188
 189         * configure: Regenerate.
 190
 191 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 192
 193         * configure: Regenerate.
 194         * config.in: Regenerate.
 195
 196 2014-03-04  Mike Frysinger  <vapier@gentoo.org>
 197
 198         * configure: Regenerate.
 199
 200 2013-09-23  Alan Modra  <amodra@gmail.com>
 201
 202         * configure: Regenerate.
 203
 204 2013-06-23  Mike Frysinger  <vapier@gentoo.org>
 205
 206         * bfin-sim.c (decode_dsp32alu_0): Add note about broken handling of
 207         SEARCH with parallel insns.
 208
 209 2013-06-23  Mike Frysinger  <vapier@gentoo.org>
 210
 211         * bfin-sim.c (decode_dsp32shift_0): Make sure HLs is 0 after last
 212         insn that uses it.
 213         (decode_dsp32shiftimm_0): Likewise.
 214         Require HLs be less than 2 for accumulator shift insns.
 215
 216 2013-06-18  Mike Frysinger  <vapier@gentoo.org>
 217
 218         * bfin-sim.c (decode_dsp32alu_0): Check more opcode fields before
 219         decoding various insns.
 220
 221 2013-06-17  Mike Frysinger  <vapier@gentoo.org>
 222
 223         * TODO: Add more notes.
 224
 225 2013-06-09  Mike Frysinger  <vapier@gentoo.org>
 226
 227         * Makefile.in ($(srcdir)/linux-fixed-code.h): Add
 228         @MAINTAINER_MODE_TRUE@ as the first item in the dependency list.
 229
 230 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 231
 232         * aclocal.m4, configure: Regenerate.
 233
 234 2013-05-10  Freddie Chopin  <freddie_chopin@op.pl>
 235
 236         * configure: Rebuild.
 237
 238 2013-03-26  Mike Frysinger  <vapier@gentoo.org>
 239
 240         * aclocal.m4, configure: Regenerate.
 241
 242 2013-03-23  Joel Sherrill  <joel.sherrill@oarcorp.com>
 243
 244         * configure.ac: Use $SIM_DV_SOCKSER_O.
 245         * configure: Regenerated.
 246
 247 2012-12-20  Joel Brobecker  <brobecker@adacore.com>
 248
 249         * aclocal.m4: Revert the previous change changing
 250         the license from GPL v2 or later to GPL v3 or later
 251         (this file was generated).
 252
 253 2012-12-20  Joel Brobecker  <brobecker@adacore.com>
 254
 255         * linux-fixed-code.s: Revert the previous change changing
 256         the license from GPL v2 or later to GPL v3 or later.
 257
 258 2012-07-31  Mike Frysinger  <vapier@gentoo.org>
 259
 260         * machs.c (bf54x_roms): Pass 0x1000 to alias field of BFROM, and
 261         0x10000 to the alias field of BFROMA.
 262         (bf561_roms): Pass 0x1000 to alias field of BFROM.
 263         (bf59x_roms): Pass 0x10000 to alias field of BFROMA.
 264
 265 2012-07-31  Mike Frysinger  <vapier@gentoo.org>
 266
 267         * machs.c (bfin_reg_fetch): Change return 0 to return -1, and
 268         return -1 to return 4.
 269         (bfin_reg_store): Likewise.
 270
 271 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 272
 273         * config.in, configure: Regenerate.
 274
 275 2012-04-09  Mike Frysinger  <vapier@gentoo.org>
 276
 277         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pint.
 278         * configure: Regenerate.
 279         * dv-bfin_pint.c, dv-bfin_pint.h: New device model.
 280         * machs.c (bf542_dev): Add PINT register blocks.
 281         (bf544_dev, bf547_dev): Likewise.
 282         (PINT_PIQS): Define.
 283         (bf54x_port): Add pint/gpio routing.
 284         * machs.h (BFIN_MMR_PINT_SIZE): Define.
 285
 286 2012-04-09  Mike Frysinger  <vapier@gentoo.org>
 287
 288         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio2.
 289         * configure: Regenerate.
 290         * dv-bfin_gpio2.c, dv-bfin_gpio2.h: New device model.
 291         * machs.c (bf54x_mem): Delete GPIO mem stub.
 292         (bf542_dev): Add GPIO register blocks.
 293         (bf544_dev, bf547_dev): Likewise.
 294         * machs.h (BFIN_MMR_GPIO2_SIZE): Define.
 295
 296 2012-04-09  Robin Getz  <robin.getz@analog.com>
 297
 298         * bfin-sim.c (decode_dsp32shift_0): Extract the sign for ASHIFT
 299         and LSHIFT, and set ASTAT based on the before/after values.
 300         Rename "val" to "acc" to be consistent with other code branches.
 301
 302 2012-04-09  Robin Getz  <robin.getz@analog.com>
 303
 304         * bfin-sim.c (sgn_extend): New helper.
 305         (decode_dsp32shiftimm_0): Call lshift when newimmag is more
 306         than 16, otherwise call ashiftrt.  Set ASTAT fields as needed.
 307         For accumulator shifts, call new sgn_extend helper.
 308
 309 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 310
 311         * bfin-sim.c (illegal_instruction_or_combination): New helper.
 312         (decode_ProgCtrl_0): Call illegal_instruction_or_combination instead
 313         of illegal_instruction.
 314         (decode_PushPopReg_0, decode_CCflag_0, decode_CC2dreg_0,
 315         decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
 316         decode_dspLDST_0, decode_LDST_0, _interp_insn_bfin): Likewise.
 317         (decode_PushPopMultiple_0): Call illegal_instruction_combination when
 318         PARALLEL_GROUP is not BFIN_PARALLEL_NONE.
 319         (decode_CCflag_0, decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0,
 320         decode_COMPI2opD_0, decode_COMPI2opP_0): Likewise.
 321         (decode_CC2stat_0): Check PARALLEL_GROUP before cbit.
 322         (decode_LDSTpmod_0): Call illegal_instruction_combination when
 323         PARALLEL_GROUP is BFIN_PARALLEL_GROUP2.
 324         (decode_dagMODim_0, decode_dagMODik_0, decode_LDST_0,
 325         decode_LDSTiiFP_0, decode_LDSTii_0): Likewise.
 326
 327 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 328
 329         * bfin-sim.h (bfin_parallel_group): New enum.
 330         (bfin_cpu_state): Add new "group" member.
 331         (PARALLEL_GROUP): Define.
 332         * bfin-sim.c (decode_ProgCtrl_0): Change INSN_LEN check to
 333         PARALLEL_GROUP.
 334         (decode_CaCTRL_0, decode_PushPopReg_0, decode_ccMV_0, decode_CCflag_0,
 335         decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
 336         decode_LOGI2op_0, decode_LoopSetup_0, decode_LDIMMhalf_0,
 337         decode_CALLa_0, decode_linkage_0): Likewise.
 338         (_interp_insn_bfin): Set PARALLEL_GROUP.
 339         (interp_insn_bfin): Likewise.
 340
 341 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 342
 343         * bfin-sim.c (decode_dsp32alu_0): Delete extra space in TRACE_INSN.
 344
 345 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 346
 347         * bfin-sim.c (_interp_insn_bfin): Call illegal_instruction_combination
 348         when INSN_LEN is non-zero before 32bit decode.
 349
 350 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 351
 352         * bfin-dis.c (fmtconst): Replace decimal handling with a single
 353         sprintf call and the '*' field width.
 354
 355 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 356
 357         * machs.c (bfin_model_map_bfrom): Return when mnum is 535.
 358
 359 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 360
 361         * interp.c (bfin_user_init): Move auxvt_size decl from top to
 362         inside of auxvt check.
 363
 364 2012-03-31  Mike Frysinger  <vapier@gentoo.org>
 365
 366         * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2.
 367
 368 2012-03-31  Mike Frysinger  <vapier@gentoo.org>
 369
 370         * devices.c: Include devices.h.
 371
 372 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 373
 374         * aclocal.m4, config.in, configure: Regenerate.
 375
 376 2012-03-19  Robin Getz  <robin.getz@analog.com>
 377             Mike Frysinger  <vapier@gentoo.org>
 378
 379         * bfin-sim.c (lshift): Add an overflow flag.  Delete now unused
 380         i, j, and tmp vars.  Add a new v_i var.  Split the overflow logic
 381         out from the saturate logic.  Do not set V ASTAT bits when working
 382         with accumulators.
 383         (decode_ALU2op_0): Add new argument to lshift call.
 384         (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
 385         Likewise.
 386
 387 2012-03-18  Mike Frysinger  <vapier@gentoo.org>
 388
 389         * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
 390         (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
 391         amc->bank_base.
 392         (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
 393
 394 2012-03-18  Mike Frysinger  <vapier@gentoo.org>
 395
 396         * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
 397         ARRAY_SIZE rather than hardcoded constant.
 398
 399 2012-02-04  Mike Frysinger  <vapier@gentoo.org>
 400
 401         * config.in: Regenerate.
 402         * configure: Likewise.
 403         * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
 404         * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
 405         _LINUX_TYPES_H defines.
 406
 407 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 408
 409         * interp.c (bfin_syscall): Increase _tbuf storage.  Declare new local
 410         tstr buffer.  Call cb_get_string on tstr when handling CB_SYS_stat64,
 411         CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
 412         CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat.  Include
 413         tstr in the tbuf output.
 414
 415 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 416
 417         * Makefile.in: Delete all dependency rules.
 418         * aclocal.m4, configure: Regenerate.
 419
 420 2011-10-19  Mike Frysinger  <vapier@gentoo.org>
 421
 422         * configure: Regenerate after common/acinclude.m4 update.
 423
 424 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 425
 426         * configure.ac: Change include to common/acinclude.m4.
 427         * aclocal.m4, configure: Regenerate.
 428
 429 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 430
 431         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 432         call.  Replace common.m4 include with SIM_AC_COMMON.
 433         * configure: Regenerate.
 434
 435 2011-09-28  Mike Frysinger  <vapier@gentoo.org>
 436
 437         * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
 438
 439 2011-07-05  Mike Frysinger  <vapier@gentoo.org>
 440
 441         * interp.c (sim_do_command): Delete.
 442
 443 2011-07-01  Mike Frysinger  <vapier@gentoo.org>
 444
 445         * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
 446         stat_map_32 and stat_map_64.
 447         (cb_libgloss_stat_map_32): New stat map.
 448         (stat_map_32, stat_map_64): New stat map pointers.
 449         (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
 450         stat_map_64 to cb_linux_stat_map_64.
 451         (bfin_virtual_init): New function.
 452         (sim_create_inferior): Call bfin_virtual_init for all other envs.
 453
 454 2011-06-22  Mike Frysinger  <vapier@gentoo.org>
 455
 456         * interp.c (bfin_syscall): Delete old comment.  Set dreg 1 to
 457         sc.result2 and dreg 2 to sc.errcode.
 458
 459 2011-06-18  Robin Getz  <robin.getz@analog.com>
 460
 461         * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
 462         else set it.  Set ASTAT[AVS] if val is 0.  Do this for LSHIFT and
 463         ASHIFT accumulator insns.
 464
 465 2011-06-18  Robin Getz  <robin.getz@analog.com>
 466
 467         * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
 468         (lshiftrt): Likewise.
 469
 470 2011-06-18  Robin Getz  <robin.getz@analog.com>
 471
 472         * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
 473         rather than get_extended_acc in LSHIFT insns.
 474
 475 2011-06-18  Robin Getz  <robin.getz@analog.com>
 476
 477         * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
 478         Check MM once when mmod is M_FU to match M_TFU better.
 479
 480 2011-06-18  Robin Getz  <robin.getz@analog.com>
 481
 482         * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
 483         32, perform a left shift.  Update the corresponding AV bit.  Set
 484         AZ when the low 32bits are also zero.
 485
 486 2011-06-18  Robin Getz  <robin.getz@analog.com>
 487
 488         * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
 489         call lshift only when count is positive.  Otherwise, call ashiftrt.
 490         With arithmetic right shift insns, call ashiftrt when the value is
 491         small enough, otherwise call lshift.
 492
 493 2011-06-18  Robin Getz  <robin.getz@analog.com>
 494
 495         * bfin-sim.c (extract_mult): Call saturate_s16 directly when
 496         mmod is M_IH rather than computing the result by hand.
 497
 498 2011-06-18  Robin Getz  <robin.getz@analog.com>
 499
 500         * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
 501         before saturation, set sat when more cases saturate, and set the
 502         overflow bit based on these results.  For M_TFU, M_IU, M_FU, and
 503         M_W32, change the max values compared against.
 504         (decode_dsp32mac_0): Delete v_i and add v_0 and v_1.  Pass v_1
 505         when processing MAC1 and pass v_0 when processing MAC0.  Combine
 506         the results into the V/VS ASTAT bits.
 507
 508 2011-06-18  Robin Getz  <robin.getz@analog.com>
 509
 510         * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
 511         and mmod is M_IU.  Call saturate_s16 when MM is set and mmod
 512         is M_TFU.
 513
 514 2011-06-18  Robin Getz  <robin.getz@analog.com>
 515
 516         * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
 517         allow MM to sign extend all the time.
 518         (decode_macfunc): Likewise.  Drop sign extension of unsigned
 519         values.
 520
 521 2011-06-18  Robin Getz  <robin.getz@analog.com>
 522
 523         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
 524         (decode_macfunc): Likewise when mmod is M_IH.
 525
 526 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
 527
 528         * interp.c (sim_create_inferior): Change free to freeargv.
 529
 530 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 531
 532         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
 533         (bf537_port): Define applicable devices with PORT to the glue-or
 534         devices instead of SIC.
 535         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
 536         Only parse reg/type when the device has an address.  Move the call
 537         to dv_bfin_hw_port_parse up before slash check.
 538
 539 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 540
 541         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
 542         BFIN_SIC_TO_CEC_PORTS definition.
 543         (SIC_PORTS): New define.
 544         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 545         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 546         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 547         Delete old layouts.
 548         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
 549         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
 550         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
 551         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
 552         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
 553         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
 554         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
 555         * machs.c (bfin_port_layout): New structure.
 556         (bfin_model_data): Add new "port" and "port_count" members.
 557         (PORT, SIC): New defines.
 558         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
 559         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
 560         Move and redefine port layout from dv-bfin_sic.c to here.
 561         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
 562         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
 563         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
 564         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
 565         bf548_port, bf549_port): New defines.
 566         (bfin_model_data): Link in new bfin_port_layout.port member.
 567         (dv_bfin_hw_port_parse): New function.
 568         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
 569         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
 570         bfin_sic links with new dv_bfin_hw_port_parse function.
 571
 572 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
 573
 574         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
 575
 576 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 577
 578         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
 579
 580 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 581
 582         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
 583         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
 584         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
 585         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
 586         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
 587         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
 588         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
 589         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
 590         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
 591         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
 592         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
 593         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
 594         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
 595         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
 596         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
 597         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
 598         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
 599         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
 600         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
 601         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
 602         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
 603         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
 604         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
 605         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
 606         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
 607         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
 608         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
 609         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
 610         * machs.h: ... here.
 611         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
 612
 613 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 614
 615         * Makefile.in (dv-bfin_pfmon.o): New target.
 616         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
 617         * configure: Regenerated.
 618         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
 619         * machs.c: Add include new bfin_pfmon.h.
 620         (bfin_core_dev): Add pfmon.
 621
 622 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 623
 624         * machs.c (bf526_roms): Add a region with rev of 2.
 625         (bf54x_roms): Add regions with rev of 4.
 626         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
 627         bf54x_l1-0.4.h headers.
 628         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
 629         New header files.
 630
 631 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 632
 633         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
 634         check for SP reg.
 635
 636 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 637
 638         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
 639         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
 640         and count fields of the uart.
 641         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
 642         and bfin_uart_get_next_byte.
 643         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
 644         check first, and skip the remaining code when LOOP_ENA is set in mcr.
 645         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
 646         (bfin_uart_get_next_byte): Likewise.
 647         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
 648         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
 649         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
 650
 651 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
 652
 653         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
 654         from uart->lsr before setting them.
 655
 656 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
 657
 658         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
 659         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
 660         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
 661         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
 662         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
 663         Likewise.
 664
 665 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 666
 667         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
 668         (bfin_gpio_io_write_buffer): Store the current port state into
 669         "data", and call bfin_gpio_forward_ouput when the data or dir
 670         MMRs are updated.
 671         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
 672
 673 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 674
 675         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
 676         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
 677         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
 678         mask a or mask b MMRs are written.
 679         (bfin_gpio_port_event): When handling edge gpios, set the bit in
 680         int_state, call bfin_gpio_forward_ints, and then clear the bit.
 681         When handling level gpios, clear/set the bit in int_state rather
 682         than returning immediately.  Call bfin_gpio_forward_ints instead
 683         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
 684
 685 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 686
 687         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
 688         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
 689         BYTEUNPACK.
 690         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
 691         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
 692
 693 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
 694
 695         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
 696         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
 697         and BYTEUNPACK insns.
 698
 699 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 700
 701         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
 702         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 703         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
 704         in the trace output, and call the new bfin_sic_port_event func.
 705
 706 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 707
 708         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
 709
 710 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
 711
 712         * dv-bfin_otp.c (bfin_otp_ports): Declare.
 713         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
 714
 715 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 716
 717         * configure: Regenerate after common/aclocal.m4 changes.
 718
 719 2011-03-28  Robin Getz  <robin.getz@analog.com>
 720
 721         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
 722         and add to casted low 16bits of A0.L and store in val0.  Cast high
 723         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
 724         store in val1.  Delete bit checks of val0 and val1.
 725
 726 2011-03-26  Robin Getz  <robin.getz@analog.com>
 727
 728         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
 729         the result was 0x80000000 for RND12 subtraction.
 730
 731 2011-03-26  Robin Getz  <robin.getz@analog.com>
 732
 733         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
 734
 735 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 736
 737         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
 738         major code flow point.
 739         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
 740         before calling hw_port_event on ourselves.
 741         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 742         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
 743         at the start of the function.
 744
 745 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 746
 747         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
 748         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
 749         Invert port->both bit check.
 750
 751 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 752
 753         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
 754         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
 755
 756 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 757
 758         * TODO: Document some known SIC issues.
 759
 760 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 761
 762         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
 763         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
 764         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
 765         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
 766         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
 767         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
 768         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
 769         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
 770         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
 771         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
 772         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
 773         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
 774         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
 775         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
 776
 777 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 778
 779         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
 780
 781 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 782
 783         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
 784
 785 2011-03-23  Robin Getz  <robin.getz@analog.com>
 786
 787         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
 788         value for the VIT_MAX insn, and mask off the result when done.
 789
 790 2011-03-23  Robin Getz  <robin.getz@analog.com>
 791
 792         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
 793         and set A0 to a0_lo when up_lo is false.
 794
 795 2011-03-23  Robin Getz  <robin.getz@analog.com>
 796
 797         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
 798         saturate_s40, and use the v parameter to update the AV bit.  Set the
 799         AC bit only when the final result is 0.
 800
 801 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 802
 803         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
 804         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 805         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 806         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 807         Encode ids with the ENC macro.
 808         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 809         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
 810         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
 811         (bfin_sic_533_port_event): Delete.
 812         (bfin_sic_finish): Call set_hw_port_event with
 813         bfin_sic_537_port_event for BF533 and BF59x targets.
 814
 815 2011-03-23  Robin Getz  <robin.getz@analog.com>
 816
 817         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
 818         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
 819
 820 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 821
 822         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
 823         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
 824         Change bfin_gpio addresses from f/g/h to 5/6/7.
 825         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
 826
 827 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
 828
 829         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
 830         * configure: Regenerate.
 831         * config.in: Regenerate.
 832         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
 833         kill or pread.
 834
 835 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 836
 837         * Makefile.in (dv-bfin_gpio.o): New target.
 838         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
 839         * configure: Regenerate.
 840         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
 841         * machs.c: Include dv-bfin_gpio.h.
 842         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
 843         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
 844         Delete GPIO memory stubs.
 845         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
 846         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
 847         peripheral devices.
 848         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
 849
 850 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 851
 852         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
 853         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
 854         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
 855         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
 856         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
 857         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
 858         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
 859         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
 860         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
 861         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 862         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 863         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
 864         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
 865         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 866         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 867         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
 868         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
 869
 870 2011-03-15  Robin Getz  <robin.getz@analog.com>
 871
 872         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
 873         and subs.
 874
 875 2011-03-15  Robin Getz  <robin.getz@analog.com>
 876
 877         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 878
 879 2011-03-15  Robin Getz  <robin.getz@analog.com>
 880
 881         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 882         high bit is set after extract_mult.
 883         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 884         functions.  Use these to update the AN bit.
 885
 886 2011-03-15  Robin Getz  <robin.getz@analog.com>
 887
 888         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 889         the extract_mult functions.  Include these when updating the V, VS,
 890         and V_COPY bits.
 891
 892 2011-03-15  Robin Getz  <robin.getz@analog.com>
 893
 894         * bfin-sim.c (astat_names): New global bit array.
 895         (decode_CC2stat_0): Delete local astat_name and astat_names.
 896         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 897         Print out ASTAT bit values when checking an ASTAT register.
 898
 899 2010-03-15  Robin Getz  <robin.getz@analog.com>
 900
 901         * bfin-sim.c (extract_mult): Handle M_IU.
 902
 903 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 904
 905         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 906         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 907         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 908         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 909         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 910         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 911         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 912         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 913         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 914         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 915         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 916         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 917         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 918         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 919         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 920         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 921         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 922         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 923         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 924         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 925         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 926         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 927         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 928         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 929         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 930         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 931         tconfig.in: New Blackfin port.