sim/bfin/ChangeLog

   1 2011-06-18  Robin Getz  <robin.getz@analog.com>
   2
   3         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
   4         (decode_macfunc): Likewise when mmod is M_IH.
   5
   6 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
   7
   8         * interp.c (sim_create_inferior): Change free to freeargv.
   9
  10 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  11
  12         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
  13         (bf537_port): Define applicable devices with PORT to the glue-or
  14         devices instead of SIC.
  15         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
  16         Only parse reg/type when the device has an address.  Move the call
  17         to dv_bfin_hw_port_parse up before slash check.
  18
  19 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  20
  21         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
  22         BFIN_SIC_TO_CEC_PORTS definition.
  23         (SIC_PORTS): New define.
  24         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
  25         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
  26         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
  27         Delete old layouts.
  28         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
  29         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
  30         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
  31         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
  32         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
  33         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
  34         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
  35         * machs.c (bfin_port_layout): New structure.
  36         (bfin_model_data): Add new "port" and "port_count" members.
  37         (PORT, SIC): New defines.
  38         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
  39         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
  40         Move and redefine port layout from dv-bfin_sic.c to here.
  41         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
  42         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
  43         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
  44         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
  45         bf548_port, bf549_port): New defines.
  46         (bfin_model_data): Link in new bfin_port_layout.port member.
  47         (dv_bfin_hw_port_parse): New function.
  48         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
  49         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
  50         bfin_sic links with new dv_bfin_hw_port_parse function.
  51
  52 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
  53
  54         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
  55
  56 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  57
  58         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
  59
  60 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  61
  62         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
  63         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
  64         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
  65         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
  66         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
  67         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
  68         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
  69         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
  70         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
  71         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
  72         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
  73         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
  74         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
  75         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
  76         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
  77         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
  78         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
  79         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
  80         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
  81         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
  82         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
  83         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
  84         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
  85         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
  86         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
  87         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
  88         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
  89         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
  90         * machs.h: ... here.
  91         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
  92
  93 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  94
  95         * Makefile.in (dv-bfin_pfmon.o): New target.
  96         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
  97         * configure: Regenerated.
  98         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
  99         * machs.c: Add include new bfin_pfmon.h.
 100         (bfin_core_dev): Add pfmon.
 101
 102 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 103
 104         * machs.c (bf526_roms): Add a region with rev of 2.
 105         (bf54x_roms): Add regions with rev of 4.
 106         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
 107         bf54x_l1-0.4.h headers.
 108         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
 109         New header files.
 110
 111 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 112
 113         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
 114         check for SP reg.
 115
 116 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 117
 118         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
 119         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
 120         and count fields of the uart.
 121         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
 122         and bfin_uart_get_next_byte.
 123         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
 124         check first, and skip the remaining code when LOOP_ENA is set in mcr.
 125         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
 126         (bfin_uart_get_next_byte): Likewise.
 127         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
 128         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
 129         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
 130
 131 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
 132
 133         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
 134         from uart->lsr before setting them.
 135
 136 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
 137
 138         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
 139         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
 140         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
 141         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
 142         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
 143         Likewise.
 144
 145 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 146
 147         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
 148         (bfin_gpio_io_write_buffer): Store the current port state into
 149         "data", and call bfin_gpio_forward_ouput when the data or dir
 150         MMRs are updated.
 151         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
 152
 153 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 154
 155         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
 156         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
 157         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
 158         mask a or mask b MMRs are written.
 159         (bfin_gpio_port_event): When handling edge gpios, set the bit in
 160         int_state, call bfin_gpio_forward_ints, and then clear the bit.
 161         When handling level gpios, clear/set the bit in int_state rather
 162         than returning immediately.  Call bfin_gpio_forward_ints instead
 163         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
 164
 165 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 166
 167         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
 168         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
 169         BYTEUNPACK.
 170         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
 171         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
 172
 173 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
 174
 175         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
 176         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
 177         and BYTEUNPACK insns.
 178
 179 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 180
 181         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
 182         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 183         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
 184         in the trace output, and call the new bfin_sic_port_event func.
 185
 186 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 187
 188         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
 189
 190 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
 191
 192         * dv-bfin_otp.c (bfin_otp_ports): Declare.
 193         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
 194
 195 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 196
 197         * configure: Regenerate after common/aclocal.m4 changes.
 198
 199 2011-03-28  Robin Getz  <robin.getz@analog.com>
 200
 201         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
 202         and add to casted low 16bits of A0.L and store in val0.  Cast high
 203         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
 204         store in val1.  Delete bit checks of val0 and val1.
 205
 206 2011-03-26  Robin Getz  <robin.getz@analog.com>
 207
 208         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
 209         the result was 0x80000000 for RND12 subtraction.
 210
 211 2011-03-26  Robin Getz  <robin.getz@analog.com>
 212
 213         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
 214
 215 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 216
 217         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
 218         major code flow point.
 219         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
 220         before calling hw_port_event on ourselves.
 221         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 222         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
 223         at the start of the function.
 224
 225 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 226
 227         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
 228         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
 229         Invert port->both bit check.
 230
 231 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 232
 233         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
 234         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
 235
 236 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 237
 238         * TODO: Document some known SIC issues.
 239
 240 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 241
 242         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
 243         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
 244         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
 245         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
 246         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
 247         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
 248         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
 249         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
 250         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
 251         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
 252         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
 253         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
 254         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
 255         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
 256
 257 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 258
 259         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
 260
 261 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 262
 263         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
 264
 265 2011-03-23  Robin Getz  <robin.getz@analog.com>
 266
 267         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
 268         value for the VIT_MAX insn, and mask off the result when done.
 269
 270 2011-03-23  Robin Getz  <robin.getz@analog.com>
 271
 272         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
 273         and set A0 to a0_lo when up_lo is false.
 274
 275 2011-03-23  Robin Getz  <robin.getz@analog.com>
 276
 277         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
 278         saturate_s40, and use the v parameter to update the AV bit.  Set the
 279         AC bit only when the final result is 0.
 280
 281 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 282
 283         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
 284         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 285         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 286         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 287         Encode ids with the ENC macro.
 288         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 289         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
 290         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
 291         (bfin_sic_533_port_event): Delete.
 292         (bfin_sic_finish): Call set_hw_port_event with
 293         bfin_sic_537_port_event for BF533 and BF59x targets.
 294
 295 2011-03-23  Robin Getz  <robin.getz@analog.com>
 296
 297         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
 298         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
 299
 300 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 301
 302         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
 303         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
 304         Change bfin_gpio addresses from f/g/h to 5/6/7.
 305         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
 306
 307 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
 308
 309         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
 310         * configure: Regenerate.
 311         * config.in: Regenerate.
 312         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
 313         kill or pread.
 314
 315 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 316
 317         * Makefile.in (dv-bfin_gpio.o): New target.
 318         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
 319         * configure: Regenerate.
 320         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
 321         * machs.c: Include dv-bfin_gpio.h.
 322         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
 323         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
 324         Delete GPIO memory stubs.
 325         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
 326         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
 327         peripheral devices.
 328         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
 329
 330 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 331
 332         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
 333         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
 334         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
 335         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
 336         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
 337         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
 338         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
 339         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
 340         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
 341         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 342         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 343         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
 344         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
 345         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 346         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 347         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
 348         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
 349
 350 2011-03-15  Robin Getz  <robin.getz@analog.com>
 351
 352         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
 353         and subs.
 354
 355 2011-03-15  Robin Getz  <robin.getz@analog.com>
 356
 357         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 358
 359 2011-03-15  Robin Getz  <robin.getz@analog.com>
 360
 361         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 362         high bit is set after extract_mult.
 363         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 364         functions.  Use these to update the AN bit.
 365
 366 2011-03-15  Robin Getz  <robin.getz@analog.com>
 367
 368         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 369         the extract_mult functions.  Include these when updating the V, VS,
 370         and V_COPY bits.
 371
 372 2011-03-15  Robin Getz  <robin.getz@analog.com>
 373
 374         * bfin-sim.c (astat_names): New global bit array.
 375         (decode_CC2stat_0): Delete local astat_name and astat_names.
 376         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 377         Print out ASTAT bit values when checking an ASTAT register.
 378
 379 2010-03-15  Robin Getz  <robin.getz@analog.com>
 380
 381         * bfin-sim.c (extract_mult): Handle M_IU.
 382
 383 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 384
 385         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 386         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 387         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 388         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 389         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 390         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 391         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 392         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 393         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 394         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 395         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 396         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 397         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 398         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 399         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 400         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 401         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 402         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 403         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 404         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 405         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 406         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 407         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 408         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 409         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 410         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 411         tconfig.in: New Blackfin port.