1 /* The common simulator framework for GDB, the GNU Debugger.
3 Copyright 2002, 2007 Free Software Foundation, Inc.
5 Contributed by Andrew Cagney and Red Hat.
7 This file is part of GDB.
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program. If not, see <http://www.gnu.org/licenses/>. */
36 glue - glue to interconnect and test hardware ports
42 The glue device provides two functions. Firstly, it provides a
43 mechanism for inspecting and driving the port network. Secondly,
44 it provides a set of boolean primitives that can be used to apply
45 combinatorial operations to the port network.
47 Glue devices have a variable number of big endian <<output>>
48 registers. Each register is target-word sized. The registers can
51 Writing to an output register results in an event being driven
52 (level determined by the value written) on the devices
53 corresponding output port.
55 Reading an <<output>> register returns either the last value
56 written or the most recently computed value (for that register) as
57 a result of an event ariving on that port (which ever was computed
60 At present the following sub device types are available:
62 <<glue>>: In addition to driving its output interrupt port with any
63 value written to an interrupt input port is stored in the
64 corresponding <<output>> register. Such input interrupts, however,
65 are not propogated to an output interrupt port.
67 <<glue-and>>: The bit-wise AND of the interrupt inputs is computed
68 and then both stored in <<output>> register zero and propogated to
69 output interrupt output port zero.
75 reg = <address> <size> (required)
77 Specify the address (within the parent bus) that this device is to
78 live. The address must be 2048 * sizeof (word) (8k in a 32bit
82 interrupt-ranges = <int-number> <range> (optional)
84 If present, this specifies the number of valid interrupt inputs (up
85 to the maximum of 2048). By default, <<int-number>> is zero and
86 range is determined by the <<reg>> size.
92 int[0..] (input, output)
94 Both an input and an output port.
100 Enable tracing of the device:
105 Create source, bitwize-and, and sink glue devices. Since the
106 device at address <<0x10000>> is of size <<8>> it will have two
107 output interrupt ports.
109 | -o '/iobus@0xf0000000/glue@0x10000/reg 0x10000 8' \
110 | -o '/iobus@0xf0000000/glue-and@0x20000/reg 0x20000 4' \
111 | -o '/iobus@0xf0000000/glue-and/interrupt-ranges 0 2' \
112 | -o '/iobus@0xf0000000/glue@0x30000/reg 0x30000 4' \
115 Wire the two source interrupts to the AND device:
117 | -o '/iobus@0xf0000000/glue@0x10000 > 0 0 /iobus/glue-and' \
118 | -o '/iobus@0xf0000000/glue@0x10000 > 1 1 /iobus/glue-and' \
121 Wire the AND device up to the sink so that the and's output is not
124 | -o '/iobus@0xf0000000/glue-and > 0 0 /iobus/glue@0x30000' \
127 With the above configuration. The client program is able to
128 compute a two bit AND. For instance the <<C>> stub below prints 1
131 | unsigned *input = (void*)0xf0010000;
132 | unsigned *output = (void*)0xf0030000;
134 | input[0] = htonl(1);
135 | input[1] = htonl(0);
136 | ans = ntohl(*output);
137 | write_string("AND is ");
145 A future implementation of this device may support multiple
148 Some of the devices listed may not yet be fully implemented.
150 Additional devices such as a D flip-flop (DFF), an inverter (INV)
151 or a latch (LAT) may prove useful.
172 enum hw_glue_type type
;
176 unsigned sizeof_input
;
177 /* our output registers */
179 unsigned_word address
;
180 unsigned sizeof_output
;
186 static hw_io_read_buffer_method hw_glue_io_read_buffer
;
187 static hw_io_write_buffer_method hw_glue_io_write_buffer
;
188 static hw_port_event_method hw_glue_port_event
;
189 const static struct hw_port_descriptor hw_glue_ports
[];
192 hw_glue_finish (struct hw
*me
)
194 struct hw_glue
*glue
= HW_ZALLOC (me
, struct hw_glue
);
196 /* establish our own methods */
197 set_hw_data (me
, glue
);
198 set_hw_io_read_buffer (me
, hw_glue_io_read_buffer
);
199 set_hw_io_write_buffer (me
, hw_glue_io_write_buffer
);
200 set_hw_ports (me
, hw_glue_ports
);
201 set_hw_port_event (me
, hw_glue_port_event
);
203 /* attach to our parent bus */
204 do_hw_attach_regs (me
);
206 /* establish the output registers */
208 reg_property_spec unit
;
210 /* find a relevant reg entry */
212 while (hw_find_reg_array_property (me
, "reg", reg_nr
, &unit
)
213 && !hw_unit_size_to_attach_size (hw_parent (me
),
215 &glue
->sizeof_output
,
218 /* check out the size */
219 if (glue
->sizeof_output
== 0)
220 hw_abort (me
, "at least one reg property size must be nonzero");
221 if (glue
->sizeof_output
% sizeof (unsigned_word
) != 0)
222 hw_abort (me
, "reg property size must be %ld aligned",
223 (long) sizeof (unsigned_word
));
224 /* and the address */
225 hw_unit_address_to_attach_address (hw_parent (me
),
230 if (glue
->address
% (sizeof (unsigned_word
) * max_nr_ports
) != 0)
231 hw_abort (me
, "reg property address must be %ld aligned",
232 (long) (sizeof (unsigned_word
) * max_nr_ports
));
233 glue
->nr_outputs
= glue
->sizeof_output
/ sizeof (unsigned_word
);
234 glue
->output
= hw_zalloc (me
, glue
->sizeof_output
);
237 /* establish the input ports */
239 const struct hw_property
*ranges
;
240 ranges
= hw_find_property (me
, "interrupt-ranges");
243 glue
->int_number
= 0;
244 glue
->nr_inputs
= glue
->nr_outputs
;
246 else if (ranges
->sizeof_array
!= sizeof (unsigned_cell
) * 2)
248 hw_abort (me
, "invalid interrupt-ranges property (incorrect size)");
252 const unsigned_cell
*int_range
= ranges
->array
;
253 glue
->int_number
= BE2H_cell (int_range
[0]);
254 glue
->nr_inputs
= BE2H_cell (int_range
[1]);
256 glue
->sizeof_input
= glue
->nr_inputs
* sizeof (unsigned);
257 glue
->input
= hw_zalloc (me
, glue
->sizeof_input
);
260 /* determine our type */
262 const char *name
= hw_name(me
);
263 if (strcmp (name
, "glue") == 0)
264 glue
->type
= glue_io
;
265 else if (strcmp (name
, "glue-and") == 0)
266 glue
->type
= glue_and
;
268 hw_abort (me
, "unimplemented glue type");
271 HW_TRACE ((me
, "int-number %d, nr_inputs %d, nr_outputs %d",
272 glue
->int_number
, glue
->nr_inputs
, glue
->nr_outputs
));
276 hw_glue_io_read_buffer (struct hw
*me
,
282 struct hw_glue
*glue
= (struct hw_glue
*) hw_data (me
);
283 int reg
= ((addr
- glue
->address
) / sizeof (unsigned_word
)) % glue
->nr_outputs
;
284 if (nr_bytes
!= sizeof (unsigned_word
)
285 || (addr
% sizeof (unsigned_word
)) != 0)
286 hw_abort (me
, "missaligned read access (%d:0x%lx:%d) not supported",
287 space
, (unsigned long)addr
, nr_bytes
);
288 *(unsigned_word
*)dest
= H2BE_4(glue
->output
[reg
]);
289 HW_TRACE ((me
, "read - port %d (0x%lx), level %d",
290 reg
, (unsigned long) addr
, glue
->output
[reg
]));
296 hw_glue_io_write_buffer (struct hw
*me
,
302 struct hw_glue
*glue
= (struct hw_glue
*) hw_data (me
);
303 int reg
= ((addr
- glue
->address
) / sizeof (unsigned_word
)) % max_nr_ports
;
304 if (nr_bytes
!= sizeof (unsigned_word
)
305 || (addr
% sizeof (unsigned_word
)) != 0)
306 hw_abort (me
, "missaligned write access (%d:0x%lx:%d) not supported",
307 space
, (unsigned long) addr
, nr_bytes
);
308 glue
->output
[reg
] = H2BE_4 (*(unsigned_word
*)source
);
309 HW_TRACE ((me
, "write - port %d (0x%lx), level %d",
310 reg
, (unsigned long) addr
, glue
->output
[reg
]));
311 hw_port_event (me
, reg
, glue
->output
[reg
]);
316 hw_glue_port_event (struct hw
*me
,
322 struct hw_glue
*glue
= (struct hw_glue
*) hw_data (me
);
324 if (my_port
< glue
->int_number
325 || my_port
>= glue
->int_number
+ glue
->nr_inputs
)
326 hw_abort (me
, "port %d outside of valid range", my_port
);
327 glue
->input
[my_port
- glue
->int_number
] = level
;
332 int port
= my_port
% glue
->nr_outputs
;
333 glue
->output
[port
] = level
;
334 HW_TRACE ((me
, "input - port %d (0x%lx), level %d",
336 (unsigned long) glue
->address
+ port
* sizeof (unsigned_word
),
342 glue
->output
[0] = glue
->input
[0];
343 for (i
= 1; i
< glue
->nr_inputs
; i
++)
344 glue
->output
[0] &= glue
->input
[i
];
345 HW_TRACE ((me
, "and - port %d, level %d arrived - output %d",
346 my_port
, level
, glue
->output
[0]));
347 hw_port_event (me
, 0, glue
->output
[0]);
352 hw_abort (me
, "operator not implemented");
359 static const struct hw_port_descriptor hw_glue_ports
[] = {
360 { "int", 0, max_nr_ports
},
365 const struct hw_descriptor dv_glue_descriptor
[] = {
366 { "glue", hw_glue_finish
, },
367 { "glue-and", hw_glue_finish
, },
368 { "glue-nand", hw_glue_finish
, },
369 { "glue-or", hw_glue_finish
, },
370 { "glue-xor", hw_glue_finish
, },
371 { "glue-nor", hw_glue_finish
, },
372 { "glue-not", hw_glue_finish
, },