sim/common/genmloop.sh

   1 # Generate the main loop of the simulator.
   2 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2007, 2008
   3 # Free Software Foundation, Inc.
   4 # Contributed by Cygnus Support.
   5 #
   6 # This file is part of the GNU simulators.
   7 #
   8 # This program is free software; you can redistribute it and/or modify
   9 # it under the terms of the GNU General Public License as published by
  10 # the Free Software Foundation; either version 3 of the License, or
  11 # (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  20 #
  21 # This file creates two files: eng.hin and mloop.cin.
  22 # eng.hin defines a few macros that specify what kind of engine was selected
  23 # based on the arguments to this script.
  24 # mloop.cin contains the engine.
  25 #
  26 # ??? Rename mloop.c to eng.c?
  27 # ??? Rename mainloop.in to engine.in?
  28 # ??? Add options to specify output file names?
  29 # ??? Rename this file to genengine.sh?
  30 #
  31 # Syntax: genmloop.sh [options]
  32 #
  33 # Options:
  34 #
  35 # -mono | -multi
  36 #    - specify single cpu or multiple cpus (number specifyable at runtime),
  37 #      maximum number is a configuration parameter
  38 #    - -multi wip
  39 #
  40 # -fast: include support for fast execution in addition to full featured mode
  41 #
  42 #       Full featured mode is for tracing, profiling, etc. and is always
  43 #       provided.  Fast mode contains no frills, except speed.
  44 #       A target need only provide a "full" version of one of
  45 #       simple,scache,pbb.  If the target wants it can also provide a fast
  46 #       version of same.  It can't provide more than this.
  47 #       ??? Later add ability to have another set of full/fast semantics
  48 #       for use in with-devices/with-smp situations (pbb can be inappropriate
  49 #       here).
  50 #
  51 # -full-switch: same as -fast but for full featured version of -switch
  52 #       Only needed if -fast present.
  53 #
  54 # -simple: simple execution engine (the default)
  55 #
  56 #       This engine fetches and executes one instruction at a time.
  57 #       Field extraction is done in the semantic routines.
  58 #
  59 #       ??? There are two possible flavours of -simple.  One that extracts
  60 #       fields in the semantic routine (which is what is implemented here),
  61 #       and one that stores the extracted fields in ARGBUF before calling the
  62 #       semantic routine.  The latter is essentially the -scache case with a
  63 #       cache size of one (and the scache lookup code removed).  There are no
  64 #       current uses of this and it's not clear when doing this would be a win.
  65 #       More complicated ISA's that want to use -simple may find this a win.
  66 #       Should this ever be desirable, implement a new engine style here and
  67 #       call it -extract (or some such).  It's believed that the CGEN-generated
  68 #       code for the -scache case would be usable here, so no new code
  69 #       generation option would be needed for CGEN.
  70 #
  71 # -scache: use the scache to speed things up (not always a win)
  72 #
  73 #       This engine caches the extracted instruction before executing it.
  74 #       When executing instructions they are first looked up in the scache.
  75 #
  76 # -pbb: same as -scache but extract a (pseudo-) basic block at a time
  77 #
  78 #       This engine is basically identical to the scache version except that
  79 #       extraction is done a pseudo-basic-block at a time and the address of
  80 #       the scache entry of a branch target is recorded as well.
  81 #       Additional speedups are then possible by defering Ctrl-C checking
  82 #       to the end of basic blocks and by threading the insns together.
  83 #       We call them pseudo-basic-block's instead of just basic-blocks because
  84 #       they're not necessarily basic-blocks, though normally are.
  85 #
  86 # -parallel-read: support parallel execution with read-before-exec support.
  87 # -parallel-write: support parallel execution with write-after-exec support.
  88 # -parallel-generic-write: support parallel execution with generic queued
  89 #       writes.
  90 #
  91 #       One of these options is specified in addition to -simple, -scache,
  92 #       -pbb.  Note that while the code can determine if the cpu supports
  93 #       parallel execution with HAVE_PARALLEL_INSNS [and thus this option is
  94 #       technically unnecessary], having this option cuts down on the clutter
  95 #       in the result.
  96 #
  97 # -parallel-only: semantic code only supports parallel version of insn
  98 #
  99 #       Semantic code only supports parallel versions of each insn.
 100 #       Things can be sped up by generating both serial and parallel versions
 101 #       and is better suited to mixed parallel architectures like the m32r.
 102 #
 103 # -prefix: string to prepend to function names in mloop.c/eng.h.
 104 #
 105 #       If no prefix is specified, the cpu type is used.
 106 #
 107 # -switch file: specify file containing semantics implemented as a switch()
 108 #
 109 # -cpu <cpu-family>
 110 #
 111 #       Specify the cpu family name.
 112 #
 113 # -infile <input-file>
 114 #
 115 #       Specify the mainloop.in input file.
 116 #
 117 # -outfile-suffix <output-file-suffix>
 118 #
 119 #       Specify the suffix to append to output files.
 120 #
 121 # Only one of -scache/-pbb may be selected.
 122 # -simple is the default.
 123 #
 124 ####
 125 #
 126 # TODO
 127 # - build mainloop.in from .cpu file
 128
 129 type=mono
 130 #scache=
 131 #fast=
 132 #full_switch=
 133 #pbb=
 134 parallel=no
 135 parallel_only=no
 136 switch=
 137 cpu="unknown"
 138 infile=""
 139 prefix="unknown"
 140 outsuffix=""
 141
 142 while test $# -gt 0
 143 do
 144         case $1 in
 145         -mono) type=mono ;;
 146         -multi) type=multi ;;
 147         -no-fast) ;;
 148         -fast) fast=yes ;;
 149         -full-switch) full_switch=yes ;;
 150         -simple) ;;
 151         -scache) scache=yes ;;
 152         -pbb) pbb=yes ;;
 153         -no-parallel) ;;
 154         -outfile-suffix) shift ; outsuffix=$1 ;;
 155         -parallel-read) parallel=read ;;
 156         -parallel-write) parallel=write ;;
 157         -parallel-generic-write) parallel=genwrite ;;
 158         -parallel-only) parallel_only=yes ;;
 159         -prefix) shift ; prefix=$1 ;;
 160         -switch) shift ; switch=$1 ;;
 161         -cpu) shift ; cpu=$1 ;;
 162         -infile) shift ; infile=$1 ;;
 163         *) echo "unknown option: $1" >&2 ; exit 1 ;;
 164         esac
 165         shift
 166 done
 167
 168 # Argument validation.
 169
 170 if [ x$scache = xyes -a x$pbb = xyes ] ; then
 171     echo "only one of -scache and -pbb may be selected" >&2
 172     exit 1
 173 fi
 174
 175 if [ "x$cpu" = xunknown ] ; then
 176     echo "cpu family not specified" >&2
 177     exit 1
 178 fi
 179
 180 if [ "x$infile" = x ] ; then
 181     echo "mainloop.in not specified" >&2
 182     exit 1
 183 fi
 184
 185 if [ "x$prefix" = xunknown ] ; then
 186     prefix=$cpu
 187 fi
 188
 189 lowercase='abcdefghijklmnopqrstuvwxyz'
 190 uppercase='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
 191 CPU=`echo ${cpu} | tr "${lowercase}" "${uppercase}"`
 192 PREFIX=`echo ${prefix} | tr "${lowercase}" "${uppercase}"`
 193
 194 ##########################################################################
 195
 196 rm -f eng${outsuffix}.hin
 197 exec 1>eng${outsuffix}.hin
 198
 199 echo "/* engine configuration for ${cpu} */"
 200 echo ""
 201
 202 echo "/* WITH_FAST: non-zero if a fast version of the engine is available"
 203 echo "   in addition to the full-featured version.  */"
 204 if [ x$fast = xyes ] ; then
 205         echo "#define WITH_FAST 1"
 206 else
 207         echo "#define WITH_FAST 0"
 208 fi
 209
 210 echo ""
 211 echo "/* WITH_SCACHE_PBB_${PREFIX}: non-zero if the pbb engine was selected.  */"
 212 if [ x$pbb = xyes ] ; then
 213         echo "#define WITH_SCACHE_PBB_${PREFIX} 1"
 214 else
 215         echo "#define WITH_SCACHE_PBB_${PREFIX} 0"
 216 fi
 217
 218 echo ""
 219 echo "/* HAVE_PARALLEL_INSNS: non-zero if cpu can parallelly execute > 1 insn.  */"
 220 # blah blah blah, other ways to do this, blah blah blah
 221 case x$parallel in
 222 xno)
 223     echo "#define HAVE_PARALLEL_INSNS 0"
 224     echo "#define WITH_PARALLEL_READ 0"
 225     echo "#define WITH_PARALLEL_WRITE 0"
 226     echo "#define WITH_PARALLEL_GENWRITE 0"
 227     ;;
 228 xread)
 229     echo "#define HAVE_PARALLEL_INSNS 1"
 230     echo "/* Parallel execution is supported by read-before-exec.  */"
 231     echo "#define WITH_PARALLEL_READ 1"
 232     echo "#define WITH_PARALLEL_WRITE 0"
 233     echo "#define WITH_PARALLEL_GENWRITE 0"
 234     ;;
 235 xwrite)
 236     echo "#define HAVE_PARALLEL_INSNS 1"
 237     echo "/* Parallel execution is supported by write-after-exec.  */"
 238     echo "#define WITH_PARALLEL_READ 0"
 239     echo "#define WITH_PARALLEL_WRITE 1"
 240     echo "#define WITH_PARALLEL_GENWRITE 0"
 241     ;;
 242 xgenwrite)
 243     echo "#define HAVE_PARALLEL_INSNS 1"
 244     echo "/* Parallel execution is supported by generic write-after-exec.  */"
 245     echo "#define WITH_PARALLEL_READ 0"
 246     echo "#define WITH_PARALLEL_WRITE 0"
 247     echo "#define WITH_PARALLEL_GENWRITE 1"
 248     ;;
 249 esac
 250
 251 if [ "x$switch" != x ] ; then
 252         echo ""
 253         echo "/* WITH_SEM_SWITCH_FULL: non-zero if full-featured engine is"
 254         echo "   implemented as a switch().  */"
 255         if [ x$fast != xyes -o x$full_switch = xyes ] ; then
 256                 echo "#define WITH_SEM_SWITCH_FULL 1"
 257         else
 258                 echo "#define WITH_SEM_SWITCH_FULL 0"
 259         fi
 260         echo ""
 261         echo "/* WITH_SEM_SWITCH_FAST: non-zero if fast engine is"
 262         echo "   implemented as a switch().  */"
 263         if [ x$fast = xyes ] ; then
 264                 echo "#define WITH_SEM_SWITCH_FAST 1"
 265         else
 266                 echo "#define WITH_SEM_SWITCH_FAST 0"
 267         fi
 268 fi
 269
 270 # Decls of functions we define.
 271
 272 echo ""
 273 echo "/* Functions defined in the generated mainloop.c file"
 274 echo "   (which doesn't necessarily have that file name).  */"
 275 echo ""
 276 echo "extern ENGINE_FN ${prefix}_engine_run_full;"
 277 echo "extern ENGINE_FN ${prefix}_engine_run_fast;"
 278
 279 if [ x$pbb = xyes ] ; then
 280         echo ""
 281         echo "extern SEM_PC ${prefix}_pbb_begin (SIM_CPU *, int);"
 282         echo "extern SEM_PC ${prefix}_pbb_chain (SIM_CPU *, SEM_ARG);"
 283         echo "extern SEM_PC ${prefix}_pbb_cti_chain (SIM_CPU *, SEM_ARG, SEM_BRANCH_TYPE, PCADDR);"
 284         echo "extern void ${prefix}_pbb_before (SIM_CPU *, SCACHE *);"
 285         echo "extern void ${prefix}_pbb_after (SIM_CPU *, SCACHE *);"
 286 fi
 287
 288 ##########################################################################
 289
 290 rm -f tmp-mloop-$$.cin mloop${outsuffix}.cin
 291 exec 1>tmp-mloop-$$.cin
 292
 293 # We use @cpu@ instead of ${cpu} because we still need to run sed to handle
 294 # transformation of @cpu@ for mainloop.in, so there's no need to use ${cpu}
 295 # here.
 296
 297 cat << EOF
 298 /* This file is generated by the genmloop script.  DO NOT EDIT! */
 299
 300 /* Enable switch() support in cgen headers.  */
 301 #define SEM_IN_SWITCH
 302
 303 #define WANT_CPU @cpu@
 304 #define WANT_CPU_@CPU@
 305
 306 #include "sim-main.h"
 307 #include "bfd.h"
 308 #include "cgen-mem.h"
 309 #include "cgen-ops.h"
 310 #include "sim-assert.h"
 311
 312 /* Fill in the administrative ARGBUF fields required by all insns,
 313    virtual and real.  */
 314
 315 static INLINE void
 316 @prefix@_fill_argbuf (const SIM_CPU *cpu, ARGBUF *abuf, const IDESC *idesc,
 317                     PCADDR pc, int fast_p)
 318 {
 319 #if WITH_SCACHE
 320   SEM_SET_CODE (abuf, idesc, fast_p);
 321   ARGBUF_ADDR (abuf) = pc;
 322 #endif
 323   ARGBUF_IDESC (abuf) = idesc;
 324 }
 325
 326 /* Fill in tracing/profiling fields of an ARGBUF.  */
 327
 328 static INLINE void
 329 @prefix@_fill_argbuf_tp (const SIM_CPU *cpu, ARGBUF *abuf,
 330                        int trace_p, int profile_p)
 331 {
 332   ARGBUF_TRACE_P (abuf) = trace_p;
 333   ARGBUF_PROFILE_P (abuf) = profile_p;
 334 }
 335
 336 #if WITH_SCACHE_PBB
 337
 338 /* Emit the "x-before" handler.
 339    x-before is emitted before each insn (serial or parallel).
 340    This is as opposed to x-after which is only emitted at the end of a group
 341    of parallel insns.  */
 342
 343 static INLINE void
 344 @prefix@_emit_before (SIM_CPU *current_cpu, SCACHE *sc, PCADDR pc, int first_p)
 345 {
 346   ARGBUF *abuf = &sc[0].argbuf;
 347   const IDESC *id = & CPU_IDESC (current_cpu) [@PREFIX@_INSN_X_BEFORE];
 348
 349   abuf->fields.before.first_p = first_p;
 350   @prefix@_fill_argbuf (current_cpu, abuf, id, pc, 0);
 351   /* no need to set trace_p,profile_p */
 352 }
 353
 354 /* Emit the "x-after" handler.
 355    x-after is emitted after a serial insn or at the end of a group of
 356    parallel insns.  */
 357
 358 static INLINE void
 359 @prefix@_emit_after (SIM_CPU *current_cpu, SCACHE *sc, PCADDR pc)
 360 {
 361   ARGBUF *abuf = &sc[0].argbuf;
 362   const IDESC *id = & CPU_IDESC (current_cpu) [@PREFIX@_INSN_X_AFTER];
 363
 364   @prefix@_fill_argbuf (current_cpu, abuf, id, pc, 0);
 365   /* no need to set trace_p,profile_p */
 366 }
 367
 368 #endif /* WITH_SCACHE_PBB */
 369
 370 EOF
 371
 372 ${SHELL} $infile support
 373
 374 ##########################################################################
 375
 376 # Simple engine: fetch an instruction, execute the instruction.
 377 #
 378 # Instruction fields are not extracted into ARGBUF, they are extracted in
 379 # the semantic routines themselves.  However, there is still a need to pass
 380 # and return misc. information to the semantic routines so we still use ARGBUF.
 381 # [One could certainly implement things differently and remove ARGBUF.
 382 # It's not clear this is necessarily always a win.]
 383 # ??? The use of the SCACHE struct is for consistency with the with-scache
 384 # case though it might be a source of confusion.
 385
 386 if [ x$scache != xyes -a x$pbb != xyes ] ; then
 387
 388     cat << EOF
 389
 390 #define FAST_P 0
 391
 392 void
 393 @prefix@_engine_run_full (SIM_CPU *current_cpu)
 394 {
 395 #define FAST_P 0
 396   SIM_DESC current_state = CPU_STATE (current_cpu);
 397   /* ??? Use of SCACHE is a bit of a hack as we don't actually use the scache.
 398      We do however use ARGBUF so for consistency with the other engine flavours
 399      the SCACHE type is used.  */
 400   SCACHE cache[MAX_LIW_INSNS];
 401   SCACHE *sc = &cache[0];
 402
 403 EOF
 404
 405 case x$parallel in
 406 xread | xwrite)
 407     cat << EOF
 408   PAREXEC pbufs[MAX_PARALLEL_INSNS];
 409   PAREXEC *par_exec;
 410
 411 EOF
 412     ;;
 413 esac
 414
 415 # Any initialization code before looping starts.
 416 # Note that this code may declare some locals.
 417 ${SHELL} $infile init
 418
 419 if [ x$parallel = xread ] ; then
 420   cat << EOF
 421
 422 #if defined (__GNUC__)
 423   {
 424     if (! CPU_IDESC_READ_INIT_P (current_cpu))
 425       {
 426 /* ??? Later maybe paste read.c in when building mainloop.c.  */
 427 #define DEFINE_LABELS
 428 #include "readx.c"
 429         CPU_IDESC_READ_INIT_P (current_cpu) = 1;
 430       }
 431   }
 432 #endif
 433
 434 EOF
 435 fi
 436
 437 cat << EOF
 438
 439   if (! CPU_IDESC_SEM_INIT_P (current_cpu))
 440     {
 441 #if WITH_SEM_SWITCH_FULL
 442 #if defined (__GNUC__)
 443 /* ??? Later maybe paste sem-switch.c in when building mainloop.c.  */
 444 #define DEFINE_LABELS
 445 #include "$switch"
 446 #endif
 447 #else
 448       @prefix@_sem_init_idesc_table (current_cpu);
 449 #endif
 450       CPU_IDESC_SEM_INIT_P (current_cpu) = 1;
 451     }
 452
 453   do
 454     {
 455 /* begin full-exec-simple */
 456 EOF
 457
 458 ${SHELL} $infile full-exec-simple
 459
 460 cat << EOF
 461 /* end full-exec-simple */
 462
 463       ++ CPU_INSN_COUNT (current_cpu);
 464     }
 465   while (0 /*CPU_RUNNING_P (current_cpu)*/);
 466 }
 467
 468 #undef FAST_P
 469
 470 EOF
 471
 472 ####################################
 473
 474 # Simple engine: fast version.
 475 # ??? A somewhat dubious effort, but for completeness' sake.
 476
 477 if [ x$fast = xyes ] ; then
 478
 479     cat << EOF
 480
 481 #define FAST_P 1
 482
 483 FIXME: "fast simple version unimplemented, delete -fast arg to genmloop.sh."
 484
 485 #undef FAST_P
 486
 487 EOF
 488
 489 fi # -fast
 490
 491 fi # simple engine
 492
 493 ##########################################################################
 494
 495 # Non-parallel scache engine: lookup insn in scache, fetch if missing,
 496 # then execute it.
 497
 498 if [ x$scache = xyes -a x$parallel = xno ] ; then
 499
 500     cat << EOF
 501
 502 static INLINE SCACHE *
 503 @prefix@_scache_lookup (SIM_CPU *current_cpu, PCADDR vpc, SCACHE *scache,
 504                      unsigned int hash_mask, int FAST_P)
 505 {
 506   /* First step: look up current insn in hash table.  */
 507   SCACHE *sc = scache + SCACHE_HASH_PC (vpc, hash_mask);
 508
 509   /* If the entry isn't the one we want (cache miss),
 510      fetch and decode the instruction.  */
 511   if (sc->argbuf.addr != vpc)
 512     {
 513       if (! FAST_P)
 514         PROFILE_COUNT_SCACHE_MISS (current_cpu);
 515
 516 /* begin extract-scache */
 517 EOF
 518
 519 ${SHELL} $infile extract-scache
 520
 521 cat << EOF
 522 /* end extract-scache */
 523     }
 524   else if (! FAST_P)
 525     {
 526       PROFILE_COUNT_SCACHE_HIT (current_cpu);
 527       /* Make core access statistics come out right.
 528          The size is a guess, but it's currently not used either.  */
 529       PROFILE_COUNT_CORE (current_cpu, vpc, 2, exec_map);
 530     }
 531
 532   return sc;
 533 }
 534
 535 #define FAST_P 0
 536
 537 void
 538 @prefix@_engine_run_full (SIM_CPU *current_cpu)
 539 {
 540   SIM_DESC current_state = CPU_STATE (current_cpu);
 541   SCACHE *scache = CPU_SCACHE_CACHE (current_cpu);
 542   unsigned int hash_mask = CPU_SCACHE_HASH_MASK (current_cpu);
 543   SEM_PC vpc;
 544
 545 EOF
 546
 547 # Any initialization code before looping starts.
 548 # Note that this code may declare some locals.
 549 ${SHELL} $infile init
 550
 551 cat << EOF
 552
 553   if (! CPU_IDESC_SEM_INIT_P (current_cpu))
 554     {
 555 #if ! WITH_SEM_SWITCH_FULL
 556       @prefix@_sem_init_idesc_table (current_cpu);
 557 #endif
 558       CPU_IDESC_SEM_INIT_P (current_cpu) = 1;
 559     }
 560
 561   vpc = GET_H_PC ();
 562
 563   do
 564     {
 565       SCACHE *sc;
 566
 567       sc = @prefix@_scache_lookup (current_cpu, vpc, scache, hash_mask, FAST_P);
 568
 569 /* begin full-exec-scache */
 570 EOF
 571
 572 ${SHELL} $infile full-exec-scache
 573
 574 cat << EOF
 575 /* end full-exec-scache */
 576
 577       SET_H_PC (vpc);
 578
 579       ++ CPU_INSN_COUNT (current_cpu);
 580     }
 581   while (0 /*CPU_RUNNING_P (current_cpu)*/);
 582 }
 583
 584 #undef FAST_P
 585
 586 EOF
 587
 588 ####################################
 589
 590 # Non-parallel scache engine: fast version.
 591
 592 if [ x$fast = xyes ] ; then
 593
 594     cat << EOF
 595
 596 #define FAST_P 1
 597
 598 void
 599 @prefix@_engine_run_fast (SIM_CPU *current_cpu)
 600 {
 601   SIM_DESC current_state = CPU_STATE (current_cpu);
 602   SCACHE *scache = CPU_SCACHE_CACHE (current_cpu);
 603   unsigned int hash_mask = CPU_SCACHE_HASH_MASK (current_cpu);
 604   SEM_PC vpc;
 605
 606 EOF
 607
 608 # Any initialization code before looping starts.
 609 # Note that this code may declare some locals.
 610 ${SHELL} $infile init
 611
 612 cat << EOF
 613
 614   if (! CPU_IDESC_SEM_INIT_P (current_cpu))
 615     {
 616 #if WITH_SEM_SWITCH_FAST
 617 #if defined (__GNUC__)
 618 /* ??? Later maybe paste sem-switch.c in when building mainloop.c.  */
 619 #define DEFINE_LABELS
 620 #include "$switch"
 621 #endif
 622 #else
 623       @prefix@_semf_init_idesc_table (current_cpu);
 624 #endif
 625       CPU_IDESC_SEM_INIT_P (current_cpu) = 1;
 626     }
 627
 628   vpc = GET_H_PC ();
 629
 630   do
 631     {
 632       SCACHE *sc;
 633
 634       sc = @prefix@_scache_lookup (current_cpu, vpc, scache, hash_mask, FAST_P);
 635
 636 /* begin fast-exec-scache */
 637 EOF
 638
 639 ${SHELL} $infile fast-exec-scache
 640
 641 cat << EOF
 642 /* end fast-exec-scache */
 643
 644       SET_H_PC (vpc);
 645
 646       ++ CPU_INSN_COUNT (current_cpu);
 647     }
 648   while (0 /*CPU_RUNNING_P (current_cpu)*/);
 649 }
 650
 651 #undef FAST_P
 652
 653 EOF
 654
 655 fi # -fast
 656
 657 fi # -scache && ! parallel
 658
 659 ##########################################################################
 660
 661 # Parallel scache engine: lookup insn in scache, fetch if missing,
 662 # then execute it.
 663 # For the parallel case we give the target more flexibility.
 664
 665 if [ x$scache = xyes -a x$parallel != xno ] ; then
 666
 667     cat << EOF
 668
 669 static INLINE SCACHE *
 670 @prefix@_scache_lookup (SIM_CPU *current_cpu, PCADDR vpc, SCACHE *scache,
 671                      unsigned int hash_mask, int FAST_P)
 672 {
 673   /* First step: look up current insn in hash table.  */
 674   SCACHE *sc = scache + SCACHE_HASH_PC (vpc, hash_mask);
 675
 676   /* If the entry isn't the one we want (cache miss),
 677      fetch and decode the instruction.  */
 678   if (sc->argbuf.addr != vpc)
 679     {
 680       if (! FAST_P)
 681         PROFILE_COUNT_SCACHE_MISS (current_cpu);
 682
 683 #define SET_LAST_INSN_P(last_p) do { sc->last_insn_p = (last_p); } while (0)
 684 /* begin extract-scache */
 685 EOF
 686
 687 ${SHELL} $infile extract-scache
 688
 689 cat << EOF
 690 /* end extract-scache */
 691 #undef SET_LAST_INSN_P
 692     }
 693   else if (! FAST_P)
 694     {
 695       PROFILE_COUNT_SCACHE_HIT (current_cpu);
 696       /* Make core access statistics come out right.
 697          The size is a guess, but it's currently not used either.  */
 698       PROFILE_COUNT_CORE (current_cpu, vpc, 2, exec_map);
 699     }
 700
 701   return sc;
 702 }
 703
 704 #define FAST_P 0
 705
 706 void
 707 @prefix@_engine_run_full (SIM_CPU *current_cpu)
 708 {
 709   SIM_DESC current_state = CPU_STATE (current_cpu);
 710   SCACHE *scache = CPU_SCACHE_CACHE (current_cpu);
 711   unsigned int hash_mask = CPU_SCACHE_HASH_MASK (current_cpu);
 712   SEM_PC vpc;
 713
 714 EOF
 715
 716 # Any initialization code before looping starts.
 717 # Note that this code may declare some locals.
 718 ${SHELL} $infile init
 719
 720 if [ x$parallel = xread ] ; then
 721 cat << EOF
 722 #if defined (__GNUC__)
 723   {
 724     if (! CPU_IDESC_READ_INIT_P (current_cpu))
 725       {
 726 /* ??? Later maybe paste read.c in when building mainloop.c.  */
 727 #define DEFINE_LABELS
 728 #include "readx.c"
 729         CPU_IDESC_READ_INIT_P (current_cpu) = 1;
 730       }
 731   }
 732 #endif
 733
 734 EOF
 735 fi
 736
 737 cat << EOF
 738
 739   if (! CPU_IDESC_SEM_INIT_P (current_cpu))
 740     {
 741 #if ! WITH_SEM_SWITCH_FULL
 742       @prefix@_sem_init_idesc_table (current_cpu);
 743 #endif
 744       CPU_IDESC_SEM_INIT_P (current_cpu) = 1;
 745     }
 746
 747   vpc = GET_H_PC ();
 748
 749   do
 750     {
 751 /* begin full-exec-scache */
 752 EOF
 753
 754 ${SHELL} $infile full-exec-scache
 755
 756 cat << EOF
 757 /* end full-exec-scache */
 758     }
 759   while (0 /*CPU_RUNNING_P (current_cpu)*/);
 760 }
 761
 762 #undef FAST_P
 763
 764 EOF
 765
 766 ####################################
 767
 768 # Parallel scache engine: fast version.
 769
 770 if [ x$fast = xyes ] ; then
 771
 772     cat << EOF
 773
 774 #define FAST_P 1
 775
 776 void
 777 @prefix@_engine_run_fast (SIM_CPU *current_cpu)
 778 {
 779   SIM_DESC current_state = CPU_STATE (current_cpu);
 780   SCACHE *scache = CPU_SCACHE_CACHE (current_cpu);
 781   unsigned int hash_mask = CPU_SCACHE_HASH_MASK (current_cpu);
 782   SEM_PC vpc;
 783   PAREXEC pbufs[MAX_PARALLEL_INSNS];
 784   PAREXEC *par_exec;
 785
 786 EOF
 787
 788 # Any initialization code before looping starts.
 789 # Note that this code may declare some locals.
 790 ${SHELL} $infile init
 791
 792 if [ x$parallel = xread ] ; then
 793 cat << EOF
 794
 795 #if defined (__GNUC__)
 796   {
 797     if (! CPU_IDESC_READ_INIT_P (current_cpu))
 798       {
 799 /* ??? Later maybe paste read.c in when building mainloop.c.  */
 800 #define DEFINE_LABELS
 801 #include "readx.c"
 802         CPU_IDESC_READ_INIT_P (current_cpu) = 1;
 803       }
 804   }
 805 #endif
 806
 807 EOF
 808 fi
 809
 810 cat << EOF
 811
 812   if (! CPU_IDESC_SEM_INIT_P (current_cpu))
 813     {
 814 #if WITH_SEM_SWITCH_FAST
 815 #if defined (__GNUC__)
 816 /* ??? Later maybe paste sem-switch.c in when building mainloop.c.  */
 817 #define DEFINE_LABELS
 818 #include "$switch"
 819 #endif
 820 #else
 821       @prefix@_semf_init_idesc_table (current_cpu);
 822 #endif
 823       CPU_IDESC_SEM_INIT_P (current_cpu) = 1;
 824     }
 825
 826   vpc = GET_H_PC ();
 827
 828   do
 829     {
 830 /* begin fast-exec-scache */
 831 EOF
 832
 833 ${SHELL} $infile fast-exec-scache
 834
 835 cat << EOF
 836 /* end fast-exec-scache */
 837     }
 838   while (0 /*CPU_RUNNING_P (current_cpu)*/);
 839 }
 840
 841 #undef FAST_P
 842
 843 EOF
 844
 845 fi # -fast
 846
 847 fi # -scache && parallel
 848
 849 ##########################################################################
 850
 851 # Compilation engine: lookup insn in scache, extract a pbb
 852 # (pseudo-basic-block) if missing, then execute the pbb.
 853 # A "pbb" is a sequence of insns up to the next cti insn or until
 854 # some prespecified maximum.
 855 # CTI: control transfer instruction.
 856
 857 if [ x$pbb = xyes ] ; then
 858
 859     cat << EOF
 860
 861 /* Record address of cti terminating a pbb.  */
 862 #define SET_CTI_VPC(sc) do { _cti_sc = (sc); } while (0)
 863 /* Record number of [real] insns in pbb.  */
 864 #define SET_INSN_COUNT(n) do { _insn_count = (n); } while (0)
 865
 866 /* Fetch and extract a pseudo-basic-block.
 867    FAST_P is non-zero if no tracing/profiling/etc. is wanted.  */
 868
 869 INLINE SEM_PC
 870 @prefix@_pbb_begin (SIM_CPU *current_cpu, int FAST_P)
 871 {
 872   SEM_PC new_vpc;
 873   PCADDR pc;
 874   SCACHE *sc;
 875   int max_insns = CPU_SCACHE_MAX_CHAIN_LENGTH (current_cpu);
 876
 877   pc = GET_H_PC ();
 878
 879   new_vpc = scache_lookup_or_alloc (current_cpu, pc, max_insns, &sc);
 880   if (! new_vpc)
 881     {
 882       /* Leading '_' to avoid collision with mainloop.in.  */
 883       int _insn_count = 0;
 884       SCACHE *orig_sc = sc;
 885       SCACHE *_cti_sc = NULL;
 886       int slice_insns = CPU_MAX_SLICE_INSNS (current_cpu);
 887
 888       /* First figure out how many instructions to compile.
 889          MAX_INSNS is the size of the allocated buffer, which includes space
 890          for before/after handlers if they're being used.
 891          SLICE_INSNS is the maxinum number of real insns that can be
 892          executed.  Zero means "as many as we want".  */
 893       /* ??? max_insns is serving two incompatible roles.
 894          1) Number of slots available in scache buffer.
 895          2) Number of real insns to execute.
 896          They're incompatible because there are virtual insns emitted too
 897          (chain,cti-chain,before,after handlers).  */
 898
 899       if (slice_insns == 1)
 900         {
 901           /* No need to worry about extra slots required for virtual insns
 902              and parallel exec support because MAX_CHAIN_LENGTH is
 903              guaranteed to be big enough to execute at least 1 insn!  */
 904           max_insns = 1;
 905         }
 906       else
 907         {
 908           /* Allow enough slop so that while compiling insns, if max_insns > 0
 909              then there's guaranteed to be enough space to emit one real insn.
 910              MAX_CHAIN_LENGTH is typically much longer than
 911              the normal number of insns between cti's anyway.  */
 912           max_insns -= (1 /* one for the trailing chain insn */
 913                         + (FAST_P
 914                            ? 0
 915                            : (1 + MAX_PARALLEL_INSNS) /* before+after */)
 916                         + (MAX_PARALLEL_INSNS > 1
 917                            ? (MAX_PARALLEL_INSNS * 2)
 918                            : 0));
 919
 920           /* Account for before/after handlers.  */
 921           if (! FAST_P)
 922             slice_insns *= 3;
 923
 924           if (slice_insns > 0
 925               && slice_insns < max_insns)
 926             max_insns = slice_insns;
 927         }
 928
 929       new_vpc = sc;
 930
 931       /* SC,PC must be updated to point passed the last entry used.
 932          SET_CTI_VPC must be called if pbb is terminated by a cti.
 933          SET_INSN_COUNT must be called to record number of real insns in
 934          pbb [could be computed by us of course, extra cpu but perhaps
 935          negligible enough].  */
 936
 937 /* begin extract-pbb */
 938 EOF
 939
 940 ${SHELL} $infile extract-pbb
 941
 942 cat << EOF
 943 /* end extract-pbb */
 944
 945       /* The last one is a pseudo-insn to link to the next chain.
 946          It is also used to record the insn count for this chain.  */
 947       {
 948         const IDESC *id;
 949
 950         /* Was pbb terminated by a cti?  */
 951         if (_cti_sc)
 952           {
 953             id = & CPU_IDESC (current_cpu) [@PREFIX@_INSN_X_CTI_CHAIN];
 954           }
 955         else
 956           {
 957             id = & CPU_IDESC (current_cpu) [@PREFIX@_INSN_X_CHAIN];
 958           }
 959         SEM_SET_CODE (&sc->argbuf, id, FAST_P);
 960         sc->argbuf.idesc = id;
 961         sc->argbuf.addr = pc;
 962         sc->argbuf.fields.chain.insn_count = _insn_count;
 963         sc->argbuf.fields.chain.next = 0;
 964         sc->argbuf.fields.chain.branch_target = 0;
 965         ++sc;
 966       }
 967
 968       /* Update the pointer to the next free entry, may not have used as
 969          many entries as was asked for.  */
 970       CPU_SCACHE_NEXT_FREE (current_cpu) = sc;
 971       /* Record length of chain if profiling.
 972          This includes virtual insns since they count against
 973          max_insns too.  */
 974       if (! FAST_P)
 975         PROFILE_COUNT_SCACHE_CHAIN_LENGTH (current_cpu, sc - orig_sc);
 976     }
 977
 978   return new_vpc;
 979 }
 980
 981 /* Chain to the next block from a non-cti terminated previous block.  */
 982
 983 INLINE SEM_PC
 984 @prefix@_pbb_chain (SIM_CPU *current_cpu, SEM_ARG sem_arg)
 985 {
 986   ARGBUF *abuf = SEM_ARGBUF (sem_arg);
 987
 988   PBB_UPDATE_INSN_COUNT (current_cpu, sem_arg);
 989
 990   SET_H_PC (abuf->addr);
 991
 992   /* If not running forever, exit back to main loop.  */
 993   if (CPU_MAX_SLICE_INSNS (current_cpu) != 0
 994       /* Also exit back to main loop if there's an event.
 995          Note that if CPU_MAX_SLICE_INSNS != 1, events won't get processed
 996          at the "right" time, but then that was what was asked for.
 997          There is no silver bullet for simulator engines.
 998          ??? Clearly this needs a cleaner interface.
 999          At present it's just so Ctrl-C works.  */
1000       || STATE_EVENTS (CPU_STATE (current_cpu))->work_pending)
1001     CPU_RUNNING_P (current_cpu) = 0;
1002
1003   /* If chained to next block, go straight to it.  */
1004   if (abuf->fields.chain.next)
1005     return abuf->fields.chain.next;
1006   /* See if next block has already been compiled.  */
1007   abuf->fields.chain.next = scache_lookup (current_cpu, abuf->addr);
1008   if (abuf->fields.chain.next)
1009     return abuf->fields.chain.next;
1010   /* Nope, so next insn is a virtual insn to invoke the compiler
1011      (begin a pbb).  */
1012   return CPU_SCACHE_PBB_BEGIN (current_cpu);
1013 }
1014
1015 /* Chain to the next block from a cti terminated previous block.
1016    BR_TYPE indicates whether the branch was taken and whether we can cache
1017    the vpc of the branch target.
1018    NEW_PC is the target's branch address, and is only valid if
1019    BR_TYPE != SEM_BRANCH_UNTAKEN.  */
1020
1021 INLINE SEM_PC
1022 @prefix@_pbb_cti_chain (SIM_CPU *current_cpu, SEM_ARG sem_arg,
1023                      SEM_BRANCH_TYPE br_type, PCADDR new_pc)
1024 {
1025   SEM_PC *new_vpc_ptr;
1026
1027   PBB_UPDATE_INSN_COUNT (current_cpu, sem_arg);
1028
1029   /* If not running forever, exit back to main loop.  */
1030   if (CPU_MAX_SLICE_INSNS (current_cpu) != 0
1031       /* Also exit back to main loop if there's an event.
1032          Note that if CPU_MAX_SLICE_INSNS != 1, events won't get processed
1033          at the "right" time, but then that was what was asked for.
1034          There is no silver bullet for simulator engines.
1035          ??? Clearly this needs a cleaner interface.
1036          At present it's just so Ctrl-C works.  */
1037       || STATE_EVENTS (CPU_STATE (current_cpu))->work_pending)
1038     CPU_RUNNING_P (current_cpu) = 0;
1039
1040   /* Restart compiler if we branched to an uncacheable address
1041      (e.g. "j reg").  */
1042   if (br_type == SEM_BRANCH_UNCACHEABLE)
1043     {
1044       SET_H_PC (new_pc);
1045       return CPU_SCACHE_PBB_BEGIN (current_cpu);
1046     }
1047
1048   /* If branch wasn't taken, update the pc and set BR_ADDR_PTR to our
1049      next chain ptr.  */
1050   if (br_type == SEM_BRANCH_UNTAKEN)
1051     {
1052       ARGBUF *abuf = SEM_ARGBUF (sem_arg);
1053       new_pc = abuf->addr;
1054       SET_H_PC (new_pc);
1055       new_vpc_ptr = &abuf->fields.chain.next;
1056     }
1057   else
1058     {
1059       ARGBUF *abuf = SEM_ARGBUF (sem_arg);
1060       SET_H_PC (new_pc);
1061       new_vpc_ptr = &abuf->fields.chain.branch_target;
1062     }
1063
1064   /* If chained to next block, go straight to it.  */
1065   if (*new_vpc_ptr)
1066     return *new_vpc_ptr;
1067   /* See if next block has already been compiled.  */
1068   *new_vpc_ptr = scache_lookup (current_cpu, new_pc);
1069   if (*new_vpc_ptr)
1070     return *new_vpc_ptr;
1071   /* Nope, so next insn is a virtual insn to invoke the compiler
1072      (begin a pbb).  */
1073   return CPU_SCACHE_PBB_BEGIN (current_cpu);
1074 }
1075
1076 /* x-before handler.
1077    This is called before each insn.  */
1078
1079 void
1080 @prefix@_pbb_before (SIM_CPU *current_cpu, SCACHE *sc)
1081 {
1082   SEM_ARG sem_arg = sc;
1083   const ARGBUF *abuf = SEM_ARGBUF (sem_arg);
1084   int first_p = abuf->fields.before.first_p;
1085   const ARGBUF *cur_abuf = SEM_ARGBUF (sc + 1);
1086   const IDESC *cur_idesc = cur_abuf->idesc;
1087   PCADDR pc = cur_abuf->addr;
1088
1089   if (ARGBUF_PROFILE_P (cur_abuf))
1090     PROFILE_COUNT_INSN (current_cpu, pc, cur_idesc->num);
1091
1092   /* If this isn't the first insn, finish up the previous one.  */
1093
1094   if (! first_p)
1095     {
1096       if (PROFILE_MODEL_P (current_cpu))
1097         {
1098           const SEM_ARG prev_sem_arg = sc - 1;
1099           const ARGBUF *prev_abuf = SEM_ARGBUF (prev_sem_arg);
1100           const IDESC *prev_idesc = prev_abuf->idesc;
1101           int cycles;
1102
1103           /* ??? May want to measure all insns if doing insn tracing.  */
1104           if (ARGBUF_PROFILE_P (prev_abuf))
1105             {
1106               cycles = (*prev_idesc->timing->model_fn) (current_cpu, prev_sem_arg);
1107               @prefix@_model_insn_after (current_cpu, 0 /*last_p*/, cycles);
1108             }
1109         }
1110
1111       TRACE_INSN_FINI (current_cpu, cur_abuf, 0 /*last_p*/);
1112     }
1113
1114   /* FIXME: Later make cover macros: PROFILE_INSN_{INIT,FINI}.  */
1115   if (PROFILE_MODEL_P (current_cpu)
1116       && ARGBUF_PROFILE_P (cur_abuf))
1117     @prefix@_model_insn_before (current_cpu, first_p);
1118
1119   TRACE_INSN_INIT (current_cpu, cur_abuf, first_p);
1120   TRACE_INSN (current_cpu, cur_idesc->idata, cur_abuf, pc);
1121 }
1122
1123 /* x-after handler.
1124    This is called after a serial insn or at the end of a group of parallel
1125    insns.  */
1126
1127 void
1128 @prefix@_pbb_after (SIM_CPU *current_cpu, SCACHE *sc)
1129 {
1130   SEM_ARG sem_arg = sc;
1131   const ARGBUF *abuf = SEM_ARGBUF (sem_arg);
1132   const SEM_ARG prev_sem_arg = sc - 1;
1133   const ARGBUF *prev_abuf = SEM_ARGBUF (prev_sem_arg);
1134
1135   /* ??? May want to measure all insns if doing insn tracing.  */
1136   if (PROFILE_MODEL_P (current_cpu)
1137       && ARGBUF_PROFILE_P (prev_abuf))
1138     {
1139       const IDESC *prev_idesc = prev_abuf->idesc;
1140       int cycles;
1141
1142       cycles = (*prev_idesc->timing->model_fn) (current_cpu, prev_sem_arg);
1143       @prefix@_model_insn_after (current_cpu, 1 /*last_p*/, cycles);
1144     }
1145   TRACE_INSN_FINI (current_cpu, prev_abuf, 1 /*last_p*/);
1146 }
1147
1148 #define FAST_P 0
1149
1150 void
1151 @prefix@_engine_run_full (SIM_CPU *current_cpu)
1152 {
1153   SIM_DESC current_state = CPU_STATE (current_cpu);
1154   SCACHE *scache = CPU_SCACHE_CACHE (current_cpu);
1155   /* virtual program counter */
1156   SEM_PC vpc;
1157 #if WITH_SEM_SWITCH_FULL
1158   /* For communication between cti's and cti-chain.  */
1159   SEM_BRANCH_TYPE pbb_br_type;
1160   PCADDR pbb_br_npc;
1161 #endif
1162
1163 EOF
1164
1165 case x$parallel in
1166 xread | xwrite)
1167     cat << EOF
1168   PAREXEC pbufs[MAX_PARALLEL_INSNS];
1169   PAREXEC *par_exec = &pbufs[0];
1170
1171 EOF
1172     ;;
1173 esac
1174
1175 # Any initialization code before looping starts.
1176 # Note that this code may declare some locals.
1177 ${SHELL} $infile init
1178
1179 cat << EOF
1180
1181   if (! CPU_IDESC_SEM_INIT_P (current_cpu))
1182     {
1183       /* ??? 'twould be nice to move this up a level and only call it once.
1184          On the other hand, in the "let's go fast" case the test is only done
1185          once per pbb (since we only return to the main loop at the end of
1186          a pbb).  And in the "let's run until we're done" case we don't return
1187          until the program exits.  */
1188
1189 #if WITH_SEM_SWITCH_FULL
1190 #if defined (__GNUC__)
1191 /* ??? Later maybe paste sem-switch.c in when building mainloop.c.  */
1192 #define DEFINE_LABELS
1193 #include "$switch"
1194 #endif
1195 #else
1196       @prefix@_sem_init_idesc_table (current_cpu);
1197 #endif
1198
1199       /* Initialize the "begin (compile) a pbb" virtual insn.  */
1200       vpc = CPU_SCACHE_PBB_BEGIN (current_cpu);
1201       SEM_SET_FULL_CODE (SEM_ARGBUF (vpc),
1202                          & CPU_IDESC (current_cpu) [@PREFIX@_INSN_X_BEGIN]);
1203       vpc->argbuf.idesc = & CPU_IDESC (current_cpu) [@PREFIX@_INSN_X_BEGIN];
1204
1205       CPU_IDESC_SEM_INIT_P (current_cpu) = 1;
1206     }
1207
1208   CPU_RUNNING_P (current_cpu) = 1;
1209   /* ??? In the case where we're returning to the main loop after every
1210      pbb we don't want to call pbb_begin each time (which hashes on the pc
1211      and does a table lookup).  A way to speed this up is to save vpc
1212      between calls.  */
1213   vpc = @prefix@_pbb_begin (current_cpu, FAST_P);
1214
1215   do
1216     {
1217 /* begin full-exec-pbb */
1218 EOF
1219
1220 ${SHELL} $infile full-exec-pbb
1221
1222 cat << EOF
1223 /* end full-exec-pbb */
1224     }
1225   while (CPU_RUNNING_P (current_cpu));
1226 }
1227
1228 #undef FAST_P
1229
1230 EOF
1231
1232 ####################################
1233
1234 # Compile engine: fast version.
1235
1236 if [ x$fast = xyes ] ; then
1237
1238     cat << EOF
1239
1240 #define FAST_P 1
1241
1242 void
1243 @prefix@_engine_run_fast (SIM_CPU *current_cpu)
1244 {
1245   SIM_DESC current_state = CPU_STATE (current_cpu);
1246   SCACHE *scache = CPU_SCACHE_CACHE (current_cpu);
1247   /* virtual program counter */
1248   SEM_PC vpc;
1249 #if WITH_SEM_SWITCH_FAST
1250   /* For communication between cti's and cti-chain.  */
1251   SEM_BRANCH_TYPE pbb_br_type;
1252   PCADDR pbb_br_npc;
1253 #endif
1254
1255 EOF
1256
1257 case x$parallel in
1258 xread | xwrite)
1259     cat << EOF
1260   PAREXEC pbufs[MAX_PARALLEL_INSNS];
1261   PAREXEC *par_exec = &pbufs[0];
1262
1263 EOF
1264     ;;
1265 esac
1266
1267 # Any initialization code before looping starts.
1268 # Note that this code may declare some locals.
1269 ${SHELL} $infile init
1270
1271 cat << EOF
1272
1273   if (! CPU_IDESC_SEM_INIT_P (current_cpu))
1274     {
1275       /* ??? 'twould be nice to move this up a level and only call it once.
1276          On the other hand, in the "let's go fast" case the test is only done
1277          once per pbb (since we only return to the main loop at the end of
1278          a pbb).  And in the "let's run until we're done" case we don't return
1279          until the program exits.  */
1280
1281 #if WITH_SEM_SWITCH_FAST
1282 #if defined (__GNUC__)
1283 /* ??? Later maybe paste sem-switch.c in when building mainloop.c.  */
1284 #define DEFINE_LABELS
1285 #include "$switch"
1286 #endif
1287 #else
1288       @prefix@_semf_init_idesc_table (current_cpu);
1289 #endif
1290
1291       /* Initialize the "begin (compile) a pbb" virtual insn.  */
1292       vpc = CPU_SCACHE_PBB_BEGIN (current_cpu);
1293       SEM_SET_FAST_CODE (SEM_ARGBUF (vpc),
1294                          & CPU_IDESC (current_cpu) [@PREFIX@_INSN_X_BEGIN]);
1295       vpc->argbuf.idesc = & CPU_IDESC (current_cpu) [@PREFIX@_INSN_X_BEGIN];
1296
1297       CPU_IDESC_SEM_INIT_P (current_cpu) = 1;
1298     }
1299
1300   CPU_RUNNING_P (current_cpu) = 1;
1301   /* ??? In the case where we're returning to the main loop after every
1302      pbb we don't want to call pbb_begin each time (which hashes on the pc
1303      and does a table lookup).  A way to speed this up is to save vpc
1304      between calls.  */
1305   vpc = @prefix@_pbb_begin (current_cpu, FAST_P);
1306
1307   do
1308     {
1309 /* begin fast-exec-pbb */
1310 EOF
1311
1312 ${SHELL} $infile fast-exec-pbb
1313
1314 cat << EOF
1315 /* end fast-exec-pbb */
1316     }
1317   while (CPU_RUNNING_P (current_cpu));
1318 }
1319
1320 #undef FAST_P
1321
1322 EOF
1323 fi # -fast
1324
1325 fi # -pbb
1326
1327 # Expand @..@ macros appearing in tmp-mloop-{pid}.cin.
1328 sed \
1329   -e "s/@cpu@/$cpu/g" -e "s/@CPU@/$CPU/g" \
1330   -e "s/@prefix@/$prefix/g" -e "s/@PREFIX@/$PREFIX/g" < tmp-mloop-$$.cin > mloop${outsuffix}.cin
1331 rc=$?
1332 rm -f tmp-mloop-$$.cin
1333
1334 exit $rc