sim/cr16/ChangeLog

   1 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * cr16_sim.h (struct simops): Add SIM_DESC and SIM_CPU to func args.
   4         (SET_CREG, SET_HW_CREG, SET_PSR_BIT): Pass sd and cpu to move_to_cr.
   5         (dmem_addr, imem_addr, move_to_cr): Add SIM_DESC and SIM_CPU args.
   6         (RB, SW, RW, SLW, RLW): Pass sd and cpu to dmem_addr.
   7         * endian.c: Change cr16_sim.h include to sim-main.h.
   8         * gencode.c: Likewise.  Add SIM_DESC and SIM_CPU args to all OPs.
   9         * interp.c (lookup_hash, map_memory, do_run, dmap_register,
  10         imap_register, sim_cr16_translate_dmap_addr, xfer_mem,
  11         sim_cr16_translate_imap_addr, sim_cr16_translate_addr): Add
  12         SIM_DESC and SIM_CPU args and adjust all callers.
  13         (trace_sd): Delete.
  14         (sim_open): Do not assign trace_sd.
  15         (sim_resume, sim_create_inferior): Set up cpu from the first one
  16         in sd.
  17         (cr16_reg_store): Get sim state from cpu.
  18         * simops.c (move_to_cr): Add SIM_DESC and SIM_CPU args.
  19         (trace_input_func, trace_input, do_trace_output_finish,
  20         do_trace_output_finish, trace_output_40, trace_output_32,
  21         trace_output_16, trace_output_void, trace_output_flag): Add
  22         SIM_DESC arg.
  23         (trace_input_func): Likewise.  Change trace_sd to sd.
  24         (OP_*): Add SIM_DESC and SIM_CPU args to all OP funcs.
  25
  26 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
  27
  28         * cr16_sim.h (get_longlong, write_longlong, WRITE_16, READ_64,
  29         WRITE_64): Delete.
  30         * endian.c (get_longlong, write_longlong): Likewise.
  31
  32 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
  33
  34         * Makefile.in (SIM_OBJS): Add sim-reg.o.
  35         * interp.c (cr16_reg_fetch, cr16_reg_store): Add prototypes.
  36         (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
  37         (cr16_extract_unsigned_integer, cr16_store_unsigned_integer):
  38         New helper functions.
  39         (sim_fetch_register): Rename to ...
  40         (cr16_reg_fetch): ... this.  Use cr16_store_unsigned_integer
  41         to write out the updated register values.
  42         (sim_store_register): Rename to ...
  43         (cr16_reg_store): ... this.  Use cr16_extract_unsigned_integer
  44         to read in the updated register values.
  45
  46 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
  47
  48         * interp.c (sim_open): Delete sim_create_inferior call.
  49
  50 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
  51
  52         * interp.c (sim_close): Delete.
  53
  54 2015-11-10  Mike Frysinger  <vapier@gentoo.org>
  55
  56         * interp.c (sim_cr16_translate_dmap_addr): Mark static.
  57         (sim_cr16_translate_imap_addr): Likewise.
  58         (sim_cr16_translate_addr): Likewise.
  59
  60 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
  61
  62         * configure: Regenerate.
  63
  64 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  65
  66         * configure: Regenerate.
  67
  68 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  69
  70         * configure: Regenerate.
  71
  72 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  73
  74         * sim-main.h (SIM_CPU): Delete.
  75
  76 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  77
  78         * sim-main.h (sim_cia): Delete.
  79
  80 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  81
  82         * sim-main.h (CIA_GET, CIA_SET): Delete.
  83
  84 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  85
  86         * interp.c (cr16_pc_get, cr16_pc_set): New functions.
  87         (sim_open): Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
  88
  89 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
  90
  91         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
  92         * sim-main.h (STATE_CPU): Delete.
  93
  94 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
  95
  96         * configure: Regenerate.
  97
  98 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
  99
 100         * Makefile.in (SIM_OBJS): Delete sim-engine.o.
 101
 102 2015-04-01  Mike Frysinger  <vapier@gentoo.org>
 103
 104         * interp.c (sim_set_profile, sim_set_profile_size): Delete.
 105
 106 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 107
 108         * Makefile.in (simops.o): New rule.
 109
 110 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 111
 112         * cr16_sim.h (text, text_start, text_end, prog_bfd): Delete.
 113         (SEXT8, SEXT16, SEXT32): Undefine.
 114         * interp.c: Delete run-sim.h and cr16_sim.h includes.  Include
 115         sim-main.h and sim-options.h.
 116         (myname, sim_kind, init_text_p, prog_bfd_was_opened_p, prog_bfd,
 117         text, text_start, text_end, decode_pc, sim_set_profile,
 118         sim_set_profile_size, sim_set_trace, sim_info, sim_set_callbacks,
 119         sim_trace, sim_complete_command, sim_do_command, sim_load): Delete.
 120         (do_run): Delete prototype.
 121         (INLINE): Delete define.
 122         (do_run, xfer_mem): Pass in SIM_DESC.  Set cr16_callback locally from
 123         it.
 124         (sim_size): Mark static.
 125         (sim_write, sim_read): Pass sd to xfer_mem.
 126         (free_state): New function.
 127         (trace_sd): Declare global variable.
 128         (sim_open): Rewrite to use new common logic.
 129         (sim_close): Delete body.
 130         (sim_resume): Pass sd to do_run.
 131         * Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS): Delete.
 132         (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
 133         * sim-main.h: New file.
 134         * simops.c: Change cr16_sim.h include to sim-main.h.
 135         (trace_input_func): Rewrite pc checks to use trace_sd.
 136
 137 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 138
 139         * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK.
 140         * interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL,
 141         ui_loop_hook_counter, deprecated_ui_loop_hook): Delete.
 142         (sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code.
 143
 144 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 145
 146         * interp.c (old_segment_mapping, ins_type_counters, add_commas,
 147         set_dmap_register, set_imap_register, HELD_SPI_IDX, HELD_SPU_IDX,
 148         spu_register, spi_register, set_spi_register, set_spu_register):
 149         Delete.
 150         (sim_cr16_translate_addr): Delete old_segment_mapping handling.
 151         (sim_open): Likewise.
 152         (sim_info): Delete function body.
 153
 154 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 155
 156         * Makefile.in (gencode.o, cr16-opc.o): Add $(WARN_CFLAGS).
 157         (gencode): Add $(BUILD_LDFLAGS).
 158         * endian.c (get_word, get_longword, get_longlong, write_word,
 159         write_longword, write_longlong): Convert old style prototypes.
 160         * gencode.c: Include string.h.
 161         (write_header): Convert old style prototype and fix printf format.
 162         (write_template, write_opcodes): Likewise.
 163         (check_opcodes): Mark static void and put behind #if 0.
 164         * interp.c: Include inttypes.h and run-sim.h.
 165         (add_commas): Delete prototype.
 166         (decode_pc): Convert old style prototype.
 167         (do_run): Change h->op compare to 0.
 168         (add_commas, set_dmap_register, set_imap_register, HELD_SPI_IDX,
 169         HELD_SPU_IDX, spu_register, spi_register, set_spi_register,
 170         set_spu_register): Wrap in #if 0.
 171         (sim_write, sim_read, sim_close, sim_stop, sim_set_callbacks,
 172         sim_stop_reason, sim_fetch_register, sim_store_register,
 173         sim_do_command): Convert old style prototypes.
 174         (sim_create_inferior): Fix pointer cast to use uintptr_t.
 175         * simops.c [HAVE_TIME_H]: Include time.h.
 176         [HAVE_SYS_TIME_H]: Include sys/time.h.
 177         [TARGET_SYS_utime]: Include utime.h.
 178         [TARGET_SYS_wait]: Include sys/wait.h.
 179         (strrchr): Delete prototype.
 180         (cond_stat): Mark static.
 181         (trace_input_func): Mark name static.
 182         (trace_input_func, trace_output_void, trace_output_flag): Convert old style prototypes.
 183         (trace_output_40): Wrap in #if 0.
 184         (OP_*): Convert old style prototypes.  Move trace_input call below
 185         all variable decls.  Initialize tmp to 0 when appropriate.
 186
 187 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 188
 189         * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DSIM_HAVE_ENVIRONMENT.
 190         (interp.o, simops.o, endian.o, table.o): Delete rules.
 191         * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
 192         SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and
 193         SIM_AC_OPTION_INLINE.
 194         * config.in, configure: Regenerate.
 195         * interp.c (sim_trace): Define.
 196
 197 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 198
 199         * config.in, configure: Regenerate.
 200
 201 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 202
 203         * Makefile.in (SIM_EXTRA_CFLAGS): Add
 204         -DSIM_USE_DEPRECATED_RUN_FRONTEND.
 205         (SIM_RUN_OBJS): Set to run.o.
 206
 207 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 208
 209         * configure.ac (AC_CHECK_HEADERS): Delete.
 210         * aclocal.m4, configure: Regenerate.
 211
 212 2014-08-19  Alan Modra  <amodra@gmail.com>
 213
 214         * configure: Regenerate.
 215
 216 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 217
 218         * configure: Regenerate.
 219         * config.in: Regenerate.
 220
 221 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 222
 223         * interp.c (sim_do_command): Add const to cmd.
 224
 225 2014-03-05  Mike Frysinger  <vapier@gentoo.org>
 226
 227         * interp.c (sim_load): Add const to prog.
 228
 229 2014-03-04  Mike Frysinger  <vapier@gentoo.org>
 230
 231         * configure: Regenerate.
 232
 233 2013-09-23  Alan Modra  <amodra@gmail.com>
 234
 235         * configure: Regenerate.
 236
 237 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 238
 239         * aclocal.m4, configure: Regenerate.
 240
 241 2013-05-10  Freddie Chopin  <freddie_chopin@op.pl>
 242
 243         * configure: Rebuild.
 244
 245 2012-08-28  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>
 246
 247         * cr16_sim.h: Add defines for TRAP handling.
 248         * interp.c (sim_complete_command): New stub function.
 249         * simops.c: Breakpoint handling code.
 250
 251 2012-06-17  Mike Frysinger  <vapier@gentoo.org>
 252
 253         * interp.c: Include config.h first.  Also include stdlib.h and
 254         string.h so we can drop the sysdep.h include.
 255
 256 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 257
 258         * config.in, configure: Regenerate.
 259
 260 2012-05-24  Pedro Alves  <palves@redhat.com>
 261
 262         PR gdb/7205
 263
 264         Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
 265
 266 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 267
 268         * aclocal.m4, config.in, configure: Regenerate.
 269
 270 2011-12-30  Mike Frysinger  <vapier@gentoo.org>
 271
 272         PR sim/12862
 273         * simops.c (OP_C_C): Only handle TARGET_SYS_fork, TARGET_SYS_execve,
 274         TARGET_SYS_pipe, TARGET_SYS_rename, and TARGET_SYS_chown when they
 275         are defined.
 276
 277 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 278
 279         * aclocal.m4: New file.
 280         * configure: Regenerate.
 281
 282 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 283
 284         * configure.ac: Change include to common/acinclude.m4.
 285
 286 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 287
 288         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 289         call.  Replace common.m4 include with SIM_AC_COMMON.
 290         * configure: Regenerate.
 291
 292 2010-04-14  Mike Frysinger  <vapier@gentoo.org>
 293
 294         * interp.c (sim_write): Add const to buffer arg.
 295
 296 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 297
 298         * configure: Regenerate.
 299
 300 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 301
 302         * config.in: Regenerate.
 303         * configure: Likewise.
 304
 305         * configure: Regenerate.
 306
 307 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 308
 309         * configure: Regenerate to track ../common/common.m4 changes.
 310         * config.in: Ditto.
 311
 312         * interp.c (hash): Remove incorrect prototype.
 313
 314 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 315             Daniel Jacobowitz  <dan@codesourcery.com>
 316             Joseph Myers  <joseph@codesourcery.com>
 317
 318         * configure: Regenerate.
 319
 320 2008-05-02  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 321
 322         * interp.c: Update the machine code decode algorithm using hash table.
 323         * Makefile.in, cr16_sim.h, gencode.c and  simops.c: Update for typos
 324         and coding standards.
 325
 326 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 327
 328         * ChangeLog, Makefile.in, configure, configure.in, cr16_sim.h,
 329         gencode.c, interp.c, simops.c, endian.c: Created.
 330