sim/cris/Makefile.in

   1 # Makefile template for Configure for the CRIS simulator, based on a mix
   2 # of the ones for m32r and i960.
   3 #
   4 # Copyright (C) 2004-2015 Free Software Foundation, Inc.
   5 # Contributed by Axis Communications.
   6 #
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 3 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 ## COMMON_PRE_CONFIG_FRAG
  21
  22 CRISV10F_OBJS = crisv10f.o cpuv10.o decodev10.o modelv10.o mloopv10f.o
  23 CRISV32F_OBJS = crisv32f.o cpuv32.o decodev32.o modelv32.o mloopv32f.o
  24
  25 SIM_OBJS = \
  26         $(SIM_NEW_COMMON_OBJS) \
  27         sim-model.o \
  28         cgen-utils.o cgen-trace.o cgen-scache.o \
  29         cgen-run.o \
  30         sim-if.o arch.o \
  31         $(CRISV10F_OBJS) \
  32         $(CRISV32F_OBJS) \
  33         traps.o devices.o \
  34         cris-desc.o
  35
  36 # Extra headers included by sim-main.h.
  37 # FIXME: $(srccom)/cgen-ops.h should be in CGEN_INCLUDE_DEPS.
  38 SIM_EXTRA_DEPS = \
  39         $(CGEN_INCLUDE_DEPS) $(srccom)/cgen-ops.h \
  40         arch.h cpuall.h cris-sim.h cris-desc.h
  41
  42 SIM_EXTRA_CLEAN = cris-clean
  43
  44 # This selects the cris newlib/libgloss syscall definitions.
  45 NL_TARGET = -DNL_TARGET_cris
  46
  47 ## COMMON_POST_CONFIG_FRAG
  48
  49 CGEN_CPU_DIR = $(CGENDIR)/../cpu
  50
  51 arch = cris
  52
  53 sim-if.o: sim-if.c $(SIM_MAIN_DEPS) $(sim-core_h) $(sim-options_h)
  54
  55 # Needs CPU-specific knowledge.
  56 dv-cris.o: dv-cris.c $(SIM_MAIN_DEPS) $(sim-core_h)
  57
  58 # This is the same rule as dv-core.o etc.
  59 dv-rv.o: dv-rv.c $(hw_main_headers) $(sim_main_headers)
  60
  61 arch.o: arch.c $(SIM_MAIN_DEPS)
  62
  63 traps.o: traps.c targ-vals.h $(SIM_MAIN_DEPS) $(sim-options_h)
  64 devices.o: devices.c $(SIM_MAIN_DEPS)
  65
  66 # rvdummy is just used for testing.  It does nothing if
  67 # --enable-sim-hardware isn't active.
  68
  69 all: rvdummy$(EXEEXT)
  70
  71 check: rvdummy$(EXEEXT)
  72
  73 rvdummy$(EXEEXT): rvdummy.o $(EXTRA_LIBDEPS)
  74         $(CC) $(ALL_CFLAGS) -o rvdummy$(EXEEXT) rvdummy.o $(EXTRA_LIBS)
  75
  76 rvdummy.o: rvdummy.c config.h tconfig.h $(remote_sim_h) $(callback_h)
  77
  78 # CRISV10 objs
  79
  80 CRISV10F_INCLUDE_DEPS = \
  81         $(CGEN_MAIN_CPU_DEPS) \
  82         cpuv10.h decodev10.h engv10.h
  83
  84 crisv10f.o: crisv10f.c cris-tmpl.c $(CRISV10F_INCLUDE_DEPS)
  85
  86 # FIXME: What is mono and what does "Use of `mono' is wip" mean (other
  87 # than the apparent; some "mono" feature is work in progress)?
  88 mloopv10f.c engv10.h: stamp-v10fmloop
  89 stamp-v10fmloop: $(srcdir)/../common/genmloop.sh mloop.in Makefile
  90         $(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
  91                 -mono -no-fast -pbb -switch semcrisv10f-switch.c \
  92                 -cpu crisv10f -infile $(srcdir)/mloop.in
  93         $(SHELL) $(srcroot)/move-if-change eng.hin engv10.h
  94         $(SHELL) $(srcroot)/move-if-change mloop.cin mloopv10f.c
  95         touch stamp-v10fmloop
  96 mloopv10f.o: mloopv10f.c semcrisv10f-switch.c $(CRISV10F_INCLUDE_DEPS)
  97
  98 cpuv10.o: cpuv10.c $(CRISV10F_INCLUDE_DEPS)
  99 decodev10.o: decodev10.c $(CRISV10F_INCLUDE_DEPS)
 100 modelv10.o: modelv10.c $(CRISV10F_INCLUDE_DEPS)
 101
 102 # CRISV32 objs
 103
 104 CRISV32F_INCLUDE_DEPS = \
 105         $(CGEN_MAIN_CPU_DEPS) \
 106         cpuv32.h decodev32.h engv32.h
 107
 108 crisv32f.o: crisv32f.c cris-tmpl.c $(CRISV32F_INCLUDE_DEPS)
 109
 110 # FIXME: What is mono and what does "Use of `mono' is wip" mean (other
 111 # than the apparent; some "mono" feature is work in progress)?
 112 mloopv32f.c engv32.h: stamp-v32fmloop
 113 # We depend on stamp-v10fmloop to get serialization to avoid
 114 # racing with it for the same temporary file-names when "make -j".
 115 stamp-v32fmloop: stamp-v10fmloop $(srcdir)/../common/genmloop.sh mloop.in Makefile
 116         $(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
 117                 -mono -no-fast -pbb -switch semcrisv32f-switch.c \
 118                 -cpu crisv32f -infile $(srcdir)/mloop.in
 119         $(SHELL) $(srcroot)/move-if-change eng.hin engv32.h
 120         $(SHELL) $(srcroot)/move-if-change mloop.cin mloopv32f.c
 121         touch stamp-v32fmloop
 122 mloopv32f.o: mloopv32f.c semcrisv32f-switch.c $(CRISV32F_INCLUDE_DEPS)
 123
 124 cpuv32.o: cpuv32.c $(CRISV32F_INCLUDE_DEPS)
 125 decodev32.o: decodev32.c $(CRISV32F_INCLUDE_DEPS)
 126 modelv32.o: modelv32.c $(CRISV32F_INCLUDE_DEPS)
 127
 128 cris-clean:
 129         for v in 10 32; do \
 130           rm -f mloopv$${v}f.c engv$${v}.h stamp-v$${v}fmloop; \
 131           rm -f stamp-v$${v}fcpu; \
 132         done
 133         -rm -f stamp-arch stamp-desc
 134         -rm -f tmp-*
 135
 136 # cgen support, enable with --enable-cgen-maint
 137 CGEN_MAINT = ; @true
 138 # The following line is commented in or out depending upon --enable-cgen-maint.
 139 @CGEN_MAINT@CGEN_MAINT =
 140
 141 # Useful when making CGEN-generated files manually, without --enable-cgen-maint.
 142 stamps: stamp-v10fmloop stamp-v32fmloop stamp-arch stamp-v10fcpu stamp-v32fcpu stamp-desc
 143
 144 stamp-arch: $(CGEN_READ_SCM) $(CGEN_ARCH_SCM) $(CGEN_CPU_DIR)/cris.cpu Makefile
 145         $(MAKE) cgen-arch $(CGEN_FLAGS_TO_PASS) mach=crisv10,crisv32 \
 146           archfile=$(CGEN_CPU_DIR)/cris.cpu \
 147           FLAGS="with-scache with-profile=fn"
 148         touch stamp-arch
 149 arch.h arch.c cpuall.h: $(CGEN_MAINT) stamp-arch
 150
 151 # The sed-hack is supposed to be temporary, until we get CGEN to emit it.
 152 stamp-v10fcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CGEN_CPU_DIR)/cris.cpu Makefile
 153         $(MAKE) cgen-cpu-decode $(CGEN_FLAGS_TO_PASS) \
 154           archfile=$(CGEN_CPU_DIR)/cris.cpu \
 155           cpu=crisv10f mach=crisv10 SUFFIX=v10 FLAGS="with-scache with-profile=fn" EXTRAFILES="$(CGEN_CPU_SEMSW)"
 156         $(SHELL) $(srcroot)/move-if-change $(srcdir)/semv10-switch.c $(srcdir)/semcrisv10f-switch.c
 157         sed -ne 'p; s/^\(#include "sim-assert.h"\)$$/#include "cgen-ops.h"/p' < $(srcdir)/decodev10.c > decodev10.c.tmp
 158         mv decodev10.c.tmp $(srcdir)/decodev10.c
 159         touch stamp-v10fcpu
 160 cpuv10.h cpuv10.c semcrisv10f-switch.c modelv10.c decodev10.c decodev10.h: $(CGEN_MAINT) stamp-v10fcpu
 161
 162 stamp-v32fcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CGEN_CPU_DIR)/cris.cpu Makefile
 163         $(MAKE) cgen-cpu-decode $(CGEN_FLAGS_TO_PASS) \
 164           archfile=$(CGEN_CPU_DIR)/cris.cpu \
 165           cpu=crisv32f mach=crisv32 SUFFIX=v32 FLAGS="with-scache with-profile=fn" EXTRAFILES="$(CGEN_CPU_SEMSW)"
 166         $(SHELL) $(srcroot)/move-if-change $(srcdir)/semv32-switch.c $(srcdir)/semcrisv32f-switch.c
 167         sed -ne 'p; s/^\(#include "sim-assert.h"\)$$/#include "cgen-ops.h"/p' < $(srcdir)/decodev32.c > decodev32.c.tmp
 168         mv decodev32.c.tmp $(srcdir)/decodev32.c
 169         touch stamp-v32fcpu
 170 cpuv32.h cpuv32.c semcrisv32f-switch.c modelv32.c decodev32.c decodev32.h: $(CGEN_MAINT) stamp-v32fcpu
 171
 172 stamp-desc: $(CGEN_READ_SCM) $(CGEN_DESC_SCM) $(CGEN_CPU_DIR)/cris.cpu Makefile
 173         $(MAKE) cgen-desc $(CGEN_FLAGS_TO_PASS) \
 174                 archfile=$(CGEN_CPU_DIR)/cris.cpu \
 175                 cpu=cris mach=all
 176         touch stamp-desc
 177 cris-desc.c cris-desc.h cris-opc.h: $(CGEN_MAINT) stamp-desc