sim/d10v/ChangeLog

   1 Thu Apr 17 02:42:00 1997  Doug Evans  <dje@canuck.cygnus.com>
   2
   3         * Makefile.in (SIM_OBJS): Add sim-load.o.
   4         * d10v_sim.h (exec_bfd): Rename to prog_bfd.
   5         * interp.c: #include bfd.h.
   6         (myname, sim_kind, start_address): New static locals.
   7         (prog_bfd_was_opened_p, prog_bfd): New static locals.
   8         (decode_pc): Update to use prog_bfd.
   9         (sim_open): Set sim_kind, myname.  Ignore -E arg.
  10         (sim_close): Close prog_bfd if simulator opened it.
  11         (sim_create_inferior): Return SIM_RC.  Delete arg start_address.
  12         (sim_load): Return SIM_RC.  New arg abfd.  Set start address from bfd.
  13         Call sim_load_file to load file into simulator.
  14         * simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
  15
  16 Wed Apr 16 16:12:03 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  17
  18         * simops.c (OP_5F00): Only provide system calls SYS_execv,
  19         SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
  20
  21 Mon Apr  7 15:45:02 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
  22
  23         * configure: Regenerated to track ../common/aclocal.m4 changes.
  24         * config.in: Ditto.
  25
  26 Wed Apr  2 15:06:28 1997  Doug Evans  <dje@canuck.cygnus.com>
  27
  28         * interp.c (sim_open): New arg `kind'.
  29
  30         * configure: Regenerated to track ../common/aclocal.m4 changes.
  31
  32 Wed Apr  2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
  33
  34         * configure: Regenerated to track ../common/aclocal.m4 changes.
  35
  36 Mon Mar 17 15:10:07 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
  37
  38         * configure: Re-generate.
  39
  40 Fri Mar 14 10:34:11 1997  Michael Meissner  <meissner@cygnus.com>
  41
  42         * configure: Regenerate to track ../common/aclocal.m4 changes.
  43
  44         * simops.c (OP_5F00): Remove old traps 1-3.  Make trap 15 the same
  45         as trap 0, which will be deprecated.  Only set errno, if an error
  46         in fact was returned.
  47
  48 Thu Mar 13 12:41:20 1997  Doug Evans  <dje@canuck.cygnus.com>
  49
  50         * interp.c: Delete redundant prototypes of sim_foo fns.
  51         (sim_open): New SIM_DESC result.  Argument is now in argv form.
  52         (other sim_*): New SIM_DESC argument.
  53
  54 Thu Mar 13 10:29:04 1997  Michael Meissner  <meissner@cygnus.com>
  55
  56         * simops.c (trace_{input,output}_func): Call flush_stdout from the
  57         callback functions.
  58         (OP_5F00): Ditto.
  59         (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
  60         (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
  61         setting the carry bit after an add or a subtract.
  62
  63 Wed Feb 12 16:04:15 1997  Michael Meissner  <meissner@cygnus.com>
  64
  65         * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
  66         40 bits of accumulators.  Sign/zero extend as appropriate.
  67
  68 Tue Feb  4 13:33:30 1997  Doug Evans  <dje@canuck.cygnus.com>
  69
  70         * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
  71         COMMON_{PRE,POST}_CONFIG_FRAG instead.
  72         * configure.in: sinclude ../common/aclocal.m4.
  73         * configure: Regenerated.
  74
  75 Thu Jan 23 11:46:23 1997  Stu Grossman  (grossman@critters.cygnus.com)
  76
  77         * configure configure.in Makefile.in:  Update to new configure
  78         scheme which is more compatible with WinGDB builds.
  79         * configure.in:  Improve comment on how to run autoconf.
  80         * configure:  Re-run autoconf to get new ../common/aclocal.m4.
  81         * Makefile.in:  Use autoconf substitution to install common
  82         makefile fragment.
  83
  84 Fri Dec 27 22:54:05 1996  Angela Marie Thomas (angela@cygnus.com)
  85
  86         * gencode.c: patch to not #include "d10v_sim.h" which
  87         unecessarily includes bfd.h and causes wingdb configure
  88         to fail.
  89
  90 Mon Dec 16 13:39:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
  91
  92         * interp.c (xfer_mem): Change unified memory to 0x0.
  93
  94 Thu Nov 28 20:42:56 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
  95
  96         * simops.c (OP_3E01): Fix tracing information.
  97         (OP_300{0,1}): Do not propigate sign.
  98
  99 Mon Nov 25 19:47:40 1996  Doug Evans  <dje@canuck.cygnus.com>
 100
 101         * config.in (WORDS_BIGENDIAN): Add.
 102         * configure: Regenerated.
 103         * d10v_sim.h: #include "config.h"
 104
 105 Sat Nov 23 09:34:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 106
 107         * gencode.c (write_opcodes): Eliminate warnings when generated
 108         table.c is compiled.
 109
 110 Wed Nov 20 19:41:40 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 111
 112         * interp.c (sim_open): Cast result of calloc, and make sure NULL
 113         was not returned.
 114         (dmem_addr): If address is illegal or in I/O space, signal a bus
 115         error.
 116         (pc_addr): Signal bus error, not illegal instruction for bogus
 117         pc.
 118
 119 Wed Nov 20 01:23:03 1996  Doug Evans  <dje@canuck.cygnus.com>
 120
 121         * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
 122         (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
 123         * configure.in: Simplify using macros in ../common/aclocal.m4.
 124         Call AC_CHECK_HEADERS(unistd.h).
 125         * configure: Regenerated.
 126         * config.in: New file.
 127         * interp.c: #include "callback.h".
 128         * simops.c: #include "config.h".  #include <unistd.h> if present.
 129
 130 Fri Nov  8 16:19:55 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 131
 132         * d10v-sim.h (simops): Add flag is_long.
 133         (State): Add pc_changed.  Instructions which update the PC should
 134         use the JMP macro which sets this.
 135         (JMP): New macro.  Sets the PC and the pc_changed flag.
 136
 137         * gencode.c (write_opcodes): Add is_long field.
 138
 139         * interp.c (lookup_hash): If we blindly apply a short opcode's mask
 140         to a long opcode we could get a false match.  Check the opcode size.
 141         (hash): Add a size field to the hash table.
 142         (sim_open): Initialize size field in hash table.
 143         (sim_resume): Change to logic for setting the PC.  Used to increment the
 144         PC if it had not been changed.  This didn't allow single-instruction loops.
 145         Now checks the flag State.pc_changed.  Also now stops when ^C is received.
 146         (dmem_addr): Fix translation of data segments to unified memory.
 147         (sim_ctrl_c): New function.  When ^C is received, set stop_simulator flag.
 148
 149         * simops.c: Changed all branch and jump instructions to use new JMP macro.
 150         (OP_20000000): Corrected trace information to show this is a ldi.l, not
 151         a ldi.s instruction.
 152
 153 Thu Oct 31 19:13:55 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 154
 155         * interp.c (sim_fetch_register, sim_store_register): Fix bug where
 156         updating the accumulators was overwriting other parts of the global
 157         State variable.
 158
 159 Wed Oct 30 17:35:14 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 160
 161         * interp.c (bfd.h) Don't include it here any more.
 162         (text{,_start,_end}): Move here from simops.c and make extern.
 163         (decode_pc): New function to return the PC as an address that the
 164         debugger can use.
 165         (dmem_addr): Print decoded PC in error message.
 166         (pc_addr): Ditto.
 167
 168         * simops.c (bfd.h) Don't include it here any more.
 169         (text{,_start,_end}): Move to simops.c.
 170         (trace_input_func): Move decoding of PC, and looking up .text
 171         start to decode_pc.
 172
 173         * d10v_sim.h (bfd.h): Include it here.
 174         (text{,_start,_end}): Add external declarations.
 175         (exec_bfd): Ditto.
 176         (decode_pc): Ditto.
 177
 178 Tue Oct 29 12:13:52 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 179
 180         * interp.c (sim_size): Now allocates unified memory for imap segments
 181         0,1,2, and 127. Initializes imap0 and imap1 to 0x1000.  Initializes dmap to 0.
 182         (sim_write): Just call xfer_mem().
 183         (sim_read): Just call xfer_mem().
 184         (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
 185         (dmem_addr): New function. Reads dmap register and translates data
 186         addresses to local addresses.
 187         (pc_addr): New function. Reads imap register and computes local address
 188         corresponding to contents of the PC.
 189         (sim_resume): Change to use pc_addr().
 190         (sim_create_inferior): Change reinitialization code. Also reinitializes
 191         imap[01] and dmap.
 192         (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
 193         (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
 194
 195         * simops.c (MEMPTR): Redefine to use dmem_addr().
 196         (OP_5F00): Replace references to STate.imem with dmem_addr().
 197
 198         * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
 199         (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
 200         (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
 201
 202 Tue Oct 22 15:22:33 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 203
 204         * d10v_sim.h (_ins_type): Reorganize, so that we can provide
 205         better statistics, like not counting NOPS as parallel
 206         instructions, and printing total cycles.
 207         (ins_type_counters): Make unsigned long.
 208         (left_nops,right_nops): Fold into ins_type_counters.
 209
 210         * simops.c (trace_input_func): Print new instruction types.
 211         Handle OP_R2R3 as input types.
 212         (OP_{38000000,7000}): Correctly sign extend bytes.
 213         (OP_5E00): Don't count NOPs as parallel instructions.
 214         (OP_460B): Remove unused variable.
 215         (OP_5F00): Ditto.
 216
 217         * interp.c (ins_type_counters): Make unsigned long.
 218         (left_nops,right_nops): Delete.
 219         (most functions): Add prototypes.
 220         (INLINE): If GCC and optimize define as __inline__.
 221         ({,lookup_}hash,get_operands): Declare as INLINE.
 222         (do_parallel): Count conditional operations.
 223         (add_commas): New function, to add commas every 3 digits.
 224         (sim_size): Call add_commas to print numbers.
 225         (sim_{open,resume}): Delete unused variables.
 226         (sim_info): Provide better statistics.
 227         (sim_read): Add int return type.
 228
 229 Mon Oct 21 16:16:26 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 230
 231         * interp.c (sim_resume): Change the way single-stepping and exceptions
 232         are handled so single-stepping works again.
 233
 234 Thu Oct 17 12:24:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 235
 236         * endian.c: Optimize simulated loads/stores on x86, AIX, and big
 237         endian hosts.
 238
 239         * configure.in (--enable-sim-bswap): New switch to enable using
 240         the BSWAP instruction on x86's.
 241         * configure: Regenerate.
 242
 243         * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
 244         support.
 245
 246 Wed Oct 16 13:50:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 247
 248         * endian.c: New file.  Move endian functions here from interp.c.
 249         Optimize code, and make it work as either inline functions or as a
 250         separate file.
 251
 252         * interp.c: Move endian functions from here to endian.c.
 253
 254         * Makefile.in (INCLUDE): Add endian.c.
 255         (run,libsim.a): Add dependency on endian.o.
 256         (endian.o): Add dependency.
 257
 258         * d10v_sim.h (read/write support): Always go through the machine
 259         independent endian functions.  If compiling with GCC and
 260         optimizing, include endian.c so the endian functions are inlined.
 261
 262         * simops.c (OP_5F00): Correct tracing of accumulators.
 263
 264 Tue Oct 15 10:57:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 265
 266         * simops.c (OP_5F00): Add support for getpid, kill system calls.
 267
 268         * interp.c (do_{2_short,parallel}): If an exception is raised,
 269         don't execute the second instruction.
 270
 271 Sat Oct 12 22:17:43 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 272
 273         * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
 274         temporary in case the register is overriden when loading.
 275         (OP_6200): Output type is OP_DREG for tracing.
 276
 277 Fri Oct  4 23:46:18 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 278
 279         * d10v_sim.h (struct _state): Add mem_{min,max} fields.
 280
 281         * interp.c (sim_size): Initialize mem_{min,max} fields.
 282         (sim_write): Update mem_{min,max} fields.
 283         (sim_resume): If PC is not in the minimum/maximum memory range,
 284         abort.
 285         (sim_create_inferior): Preserve mem_{min,max} fields.
 286
 287 Fri Sep 27 13:11:58 1996  Mark Alexander  <marka@cygnus.com>
 288
 289         * simops.c (OP_5F00): Add support for time() system call.
 290
 291 Wed Sep 25 16:31:41 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 292
 293         * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
 294         stored if tracing.
 295         (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
 296         system calls.
 297
 298 Mon Sep 23 17:55:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 299
 300         * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
 301         (trace_input_func): Add support for  OP_{CONSTANT8,R2,R3}.
 302         (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
 303         to call/subroutine returns to trace the first two arguments and
 304         the return value.  For small jumps, use CONSTANT8, not CONSTANT16.
 305
 306 Fri Sep 20 15:36:45 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 307
 308         * interp.c (sim_create_inferior): Reinitialize State every time
 309         sim_create_inferior() is called.
 310
 311 Thu Sep 19 21:38:20 1996  Michael Meissner  <meissner@wogglebug.ziplink.net>
 312
 313         * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
 314         on comparisons.
 315         (OP_401): Fix tracing information.
 316
 317 Thu Sep 19 10:30:22 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 318
 319         * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
 320         (trace_input_func): Use them.
 321         (trace_input_func): Make sure there is a trailing space after the
 322         instruction.
 323         (OP_6200): Fix tracing info.
 324
 325         * Makefile.in (run): Add dependencies on libbfd.a and
 326         libiberity.a.
 327
 328 Wed Sep 18 09:13:25 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 329
 330         * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
 331         numbers and function names in debug trace.
 332         (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
 333         DEBUG_LINE_NUMBER.
 334         (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
 335         and exit system call trap being executed.
 336
 337         * interp.c (sim_stop_reason): Set exit code correctly for stop
 338         instruction and exit system call trap.
 339
 340         * configure.in (--enable-sim-cflags): Remove trace case.
 341         (--enable-sim-debug): New switch to set the debug values.
 342         * configure: Regenerate.
 343
 344         * simops.c (trace_{input,output}_func): Rename from
 345         trace_{input,output}.
 346         (trace_{input,output}): Call trace_{input,output}_func if
 347         d10v_debug is non-zero.
 348         (SIZE_INSTRUCTION): Cut down to 8.
 349         (SIZE_OPERANDS): Cut down to 18.
 350         (SIZE_LOCATION): New value for size of line number, function name
 351         field.
 352         (init_text_p,text{,_start,_end}): New static variables for
 353         printing line number and function name.
 354         (exec_bfd): New external that run.c sets.
 355         (trace_input_func): Print line number and function name if
 356         available and if desired.
 357         (OP_4E09): Don't print out DBT message.
 358         (OP_5FE0): Set exception field to SIG_D10V_STOP.
 359         (OP_5F00): Set exception field to SIG_D10V_EXIT.
 360
 361 Sat Sep 14 22:18:43 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 362
 363         * interp.c (do_2_short): If the instruction encodes jump->ins,
 364         don't do the second instruction if the jump succeeds.
 365
 366 Fri Sep 13 22:35:19 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 367
 368         * simops.c (OP_5F00): Use unknown traps to print all GPRs,
 369         accumulators, PC, and F0/F1/C flags.
 370
 371 Thu Sep 12 12:50:11 1996  Mark Alexander  <marka@cygnus.com>
 372
 373         * simops.c (OP_5F00): Fix problems with system calls.
 374
 375 Thu Sep 12 12:19:28 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 376
 377         * simops.c (OP_5F00): Correct tracing information for trap.
 378
 379 Wed Sep 11 18:55:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 380
 381         * Makefile.in (CSEARCH): Correctly find opcodes directory.
 382
 383 Mon Sep  9 13:27:26 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 384
 385         * simops.c (trace_output): Properly align accumulator output.
 386         (OP_3{0,2,4}00): Properly parenthesize test expression.  Add error
 387         if shift count is too high.
 388         (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
 389         (OP_4E09): Make cpfg properly trace the input flags.
 390         (op_types): Add OP_FLAG_OUTPUT.
 391         (trace_{input,output}): Support OP_FLAG_OUTPUT.
 392         (OP_31000000): This ld2w varient is a 16-bit memory reference, not
 393         an 8-bit memory reference instruction for tracing purposes.
 394         (OP_201): Addi needs to set the carry.
 395
 396 Fri Sep  6 17:56:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 397
 398         * simops.c (OP_2600, OP_2601): Changed min and max comparisons
 399         to use signed register values.
 400
 401 Wed Sep  4 11:35:17 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 402
 403         * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
 404         output.
 405         (_ins_type): New enumeration to specify which container an
 406         instruction is in, and whether it is part of a parallel operation.
 407         (_state): Add ins_type field.
 408         ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
 409         (ins_type_counters): Counters for the various instruction types.
 410         ({left,right}_nops): Counters for the number of nops in each
 411         container.
 412         (d10v_debug): New variable to indicate whether debugging is turned
 413         on.
 414
 415         * simops.c: (all functions): Change all #ifdef DEBUG code so that
 416         the input and output values can be traced, along with the
 417         instruction type.  Make the -t option enable tracing.
 418         (all functions): Change printf calls to use the printf_filtered
 419         function in the callback table.
 420
 421         * interp.c (_leftright): New enumeration to say whether 2 short
 422         instructions are done left first or right first.
 423         (do_{long,2_short,parallel}): Indicate in the machine state which
 424         type of instruction this is.  Count each of the types of
 425         instructions executed.
 426         (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
 427         flag is set.
 428         (sim_resume): Pass left/right indication to do_2_short.
 429         (all functions): Change printf calls to use the printf_filtered
 430         function in the callback table.
 431         (sim_trace): Turn on debug flag if DEBUG was defined, and call
 432         sim_resume.
 433         (sim_info): Print out statistics on instructions.
 434         (sim_{trace,create_inferior}): Eliminate extraneous output unless
 435         debugging.
 436         (sim_open): If args == -t and DEBUG was defined, set d10v_debug.
 437         Only initialize the hash table the first time sim_open is called.
 438
 439         * Makefile.in: Make objects depend on d10v_sim.h.
 440         ({,SIM_}CFLAGS): Include configure dependent switches.  Setting
 441         CFLAGS does not override host/target defines or SIM_CFLAGS.
 442         (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
 443         (run): By default, the math library is not needed to be linked
 444         in.
 445         ({BFD,LIBIBERTY}_LIB): Define as variables so they can be
 446         overridden.
 447         (VPATH): Don't set to anything but @srcdir@ to work with non-GNU
 448         makes.
 449         ({run,callback}.o): Provide explicit paths to their appropriate
 450         source directories.
 451         (gencode{,.o},d10v-opc.o): Split compilation into creating object
 452         and linking.  Instead of linking in libopcodes.a, just compile
 453         d10v-opc.o directly to handle canadian cross.
 454         (CSEARCH): Add opcodes directory.
 455
 456         * configure.in (--enable-sim-cflags): New switch to allow user to
 457         set the defaults.
 458         (CC_FOR_BUILD): Deal with canadian crosses.
 459         * configure: Regenerate.
 460
 461 Wed Sep 04 04:45:34 1996  Mark Alexander  <marka@cygnus.com>
 462
 463         * simops.c: Include correct syscall.h for d10v, not host's.
 464         Fix #ifdef SYS_stat.
 465
 466 Tue Sep  3 14:00:04 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 467
 468         * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
 469         Add trap 2 to be printf and trap 3 to be putchar.
 470
 471 Wed Aug 28 21:42:34 1996  Mark Alexander  <marka@cygnus.com>
 472
 473         * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
 474         for low-level system calls.
 475
 476 Wed Aug 28 17:33:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 477
 478         * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
 479
 480 Mon Aug 26 18:30:28 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 481
 482         * d10v_sim.h (SEXT32): Added.
 483         * interp.c: Commented out printfs.
 484         * simops.c:  Fixed error in sb and st2w.
 485
 486 Thu Aug 15 13:30:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 487
 488         * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
 489         DSP instructions.  Added modulo addressing.
 490
 491 Sun Aug 11 12:57:15 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 492
 493         * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
 494
 495 Fri Aug  2 17:44:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 496
 497         * d10v_sim.h, simops.c: Snapshot.
 498
 499 Thu Aug  1 17:05:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 500
 501         * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
 502         gencode.c, interp.c, simops.c: Created.
 503