sim/d10v/ChangeLog

   1 Thu Sep  4 17:21:23 1997  Doug Evans  <dje@seba>
   2
   3         * configure: Regenerated to track ../common/aclocal.m4 changes.
   4
   5 Wed Aug 27 18:13:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
   6
   7         * configure: Regenerated to track ../common/aclocal.m4 changes.
   8         * config.in: Ditto.
   9
  10 Tue Aug 26 10:37:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  11
  12         * interp.c (sim_kill): Delete.
  13         (sim_create_inferior): Add ABFD argument.
  14         (sim_load): Move setting of PC from here.
  15         (sim_create_inferior): To here.
  16         (start_address): Delete variable.
  17
  18 Mon Aug 25 17:50:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  19
  20         * configure: Regenerated to track ../common/aclocal.m4 changes.
  21         * config.in: Ditto.
  22
  23 Mon Aug 25 15:39:29 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  24
  25         * interp.c (sim_open): Add ABFD argument.
  26
  27 Tue May 20 10:14:45 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  28
  29         * interp.c (sim_open): Add callback argument.
  30         (sim_set_callbacks): Remove SIM_DESC argument.
  31
  32 Thu Apr 24 00:39:51 1997  Doug Evans  <dje@canuck.cygnus.com>
  33
  34         * configure: Regenerated to track ../common/aclocal.m4 changes.
  35
  36 Tue Apr 22 10:29:23 1997  Doug Evans  <dje@canuck.cygnus.com>
  37
  38         * interp.c (sim_open): Undo patch to add -E support.
  39
  40 Fri Apr 18 13:39:01 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  41
  42         * interp.c (sim_stop): New function.
  43
  44 Thu Apr 17 02:42:00 1997  Doug Evans  <dje@canuck.cygnus.com>
  45
  46         * Makefile.in (SIM_OBJS): Add sim-load.o.
  47         * d10v_sim.h (exec_bfd): Rename to prog_bfd.
  48         * interp.c: #include bfd.h.
  49         (myname, sim_kind, start_address): New static locals.
  50         (prog_bfd_was_opened_p, prog_bfd): New static locals.
  51         (decode_pc): Update to use prog_bfd.
  52         (sim_open): Set sim_kind, myname.  Ignore -E arg.
  53         (sim_close): Close prog_bfd if simulator opened it.
  54         (sim_create_inferior): Return SIM_RC.  Delete arg start_address.
  55         (sim_load): Return SIM_RC.  New arg abfd.  Set start address from bfd.
  56         Call sim_load_file to load file into simulator.
  57         * simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
  58
  59 Wed Apr 16 16:12:03 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  60
  61         * simops.c (OP_5F00): Only provide system calls SYS_execv,
  62         SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
  63
  64 Mon Apr  7 15:45:02 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
  65
  66         * configure: Regenerated to track ../common/aclocal.m4 changes.
  67         * config.in: Ditto.
  68
  69 Wed Apr  2 15:06:28 1997  Doug Evans  <dje@canuck.cygnus.com>
  70
  71         * interp.c (sim_open): New arg `kind'.
  72
  73         * configure: Regenerated to track ../common/aclocal.m4 changes.
  74
  75 Wed Apr  2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
  76
  77         * configure: Regenerated to track ../common/aclocal.m4 changes.
  78
  79 Mon Mar 17 15:10:07 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
  80
  81         * configure: Re-generate.
  82
  83 Fri Mar 14 10:34:11 1997  Michael Meissner  <meissner@cygnus.com>
  84
  85         * configure: Regenerate to track ../common/aclocal.m4 changes.
  86
  87         * simops.c (OP_5F00): Remove old traps 1-3.  Make trap 15 the same
  88         as trap 0, which will be deprecated.  Only set errno, if an error
  89         in fact was returned.
  90
  91 Thu Mar 13 12:41:20 1997  Doug Evans  <dje@canuck.cygnus.com>
  92
  93         * interp.c: Delete redundant prototypes of sim_foo fns.
  94         (sim_open): New SIM_DESC result.  Argument is now in argv form.
  95         (other sim_*): New SIM_DESC argument.
  96
  97 Thu Mar 13 10:29:04 1997  Michael Meissner  <meissner@cygnus.com>
  98
  99         * simops.c (trace_{input,output}_func): Call flush_stdout from the
 100         callback functions.
 101         (OP_5F00): Ditto.
 102         (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
 103         (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
 104         setting the carry bit after an add or a subtract.
 105
 106 Wed Feb 12 16:04:15 1997  Michael Meissner  <meissner@cygnus.com>
 107
 108         * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
 109         40 bits of accumulators.  Sign/zero extend as appropriate.
 110
 111 Tue Feb  4 13:33:30 1997  Doug Evans  <dje@canuck.cygnus.com>
 112
 113         * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
 114         COMMON_{PRE,POST}_CONFIG_FRAG instead.
 115         * configure.in: sinclude ../common/aclocal.m4.
 116         * configure: Regenerated.
 117
 118 Thu Jan 23 11:46:23 1997  Stu Grossman  (grossman@critters.cygnus.com)
 119
 120         * configure configure.in Makefile.in:  Update to new configure
 121         scheme which is more compatible with WinGDB builds.
 122         * configure.in:  Improve comment on how to run autoconf.
 123         * configure:  Re-run autoconf to get new ../common/aclocal.m4.
 124         * Makefile.in:  Use autoconf substitution to install common
 125         makefile fragment.
 126
 127 Fri Dec 27 22:54:05 1996  Angela Marie Thomas (angela@cygnus.com)
 128
 129         * gencode.c: patch to not #include "d10v_sim.h" which
 130         unecessarily includes bfd.h and causes wingdb configure
 131         to fail.
 132
 133 Mon Dec 16 13:39:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 134
 135         * interp.c (xfer_mem): Change unified memory to 0x0.
 136
 137 Thu Nov 28 20:42:56 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 138
 139         * simops.c (OP_3E01): Fix tracing information.
 140         (OP_300{0,1}): Do not propigate sign.
 141
 142 Mon Nov 25 19:47:40 1996  Doug Evans  <dje@canuck.cygnus.com>
 143
 144         * config.in (WORDS_BIGENDIAN): Add.
 145         * configure: Regenerated.
 146         * d10v_sim.h: #include "config.h"
 147
 148 Sat Nov 23 09:34:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 149
 150         * gencode.c (write_opcodes): Eliminate warnings when generated
 151         table.c is compiled.
 152
 153 Wed Nov 20 19:41:40 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 154
 155         * interp.c (sim_open): Cast result of calloc, and make sure NULL
 156         was not returned.
 157         (dmem_addr): If address is illegal or in I/O space, signal a bus
 158         error.
 159         (pc_addr): Signal bus error, not illegal instruction for bogus
 160         pc.
 161
 162 Wed Nov 20 01:23:03 1996  Doug Evans  <dje@canuck.cygnus.com>
 163
 164         * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
 165         (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
 166         * configure.in: Simplify using macros in ../common/aclocal.m4.
 167         Call AC_CHECK_HEADERS(unistd.h).
 168         * configure: Regenerated.
 169         * config.in: New file.
 170         * interp.c: #include "callback.h".
 171         * simops.c: #include "config.h".  #include <unistd.h> if present.
 172
 173 Fri Nov  8 16:19:55 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 174
 175         * d10v-sim.h (simops): Add flag is_long.
 176         (State): Add pc_changed.  Instructions which update the PC should
 177         use the JMP macro which sets this.
 178         (JMP): New macro.  Sets the PC and the pc_changed flag.
 179
 180         * gencode.c (write_opcodes): Add is_long field.
 181
 182         * interp.c (lookup_hash): If we blindly apply a short opcode's mask
 183         to a long opcode we could get a false match.  Check the opcode size.
 184         (hash): Add a size field to the hash table.
 185         (sim_open): Initialize size field in hash table.
 186         (sim_resume): Change to logic for setting the PC.  Used to increment the
 187         PC if it had not been changed.  This didn't allow single-instruction loops.
 188         Now checks the flag State.pc_changed.  Also now stops when ^C is received.
 189         (dmem_addr): Fix translation of data segments to unified memory.
 190         (sim_ctrl_c): New function.  When ^C is received, set stop_simulator flag.
 191
 192         * simops.c: Changed all branch and jump instructions to use new JMP macro.
 193         (OP_20000000): Corrected trace information to show this is a ldi.l, not
 194         a ldi.s instruction.
 195
 196 Thu Oct 31 19:13:55 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 197
 198         * interp.c (sim_fetch_register, sim_store_register): Fix bug where
 199         updating the accumulators was overwriting other parts of the global
 200         State variable.
 201
 202 Wed Oct 30 17:35:14 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 203
 204         * interp.c (bfd.h) Don't include it here any more.
 205         (text{,_start,_end}): Move here from simops.c and make extern.
 206         (decode_pc): New function to return the PC as an address that the
 207         debugger can use.
 208         (dmem_addr): Print decoded PC in error message.
 209         (pc_addr): Ditto.
 210
 211         * simops.c (bfd.h) Don't include it here any more.
 212         (text{,_start,_end}): Move to simops.c.
 213         (trace_input_func): Move decoding of PC, and looking up .text
 214         start to decode_pc.
 215
 216         * d10v_sim.h (bfd.h): Include it here.
 217         (text{,_start,_end}): Add external declarations.
 218         (exec_bfd): Ditto.
 219         (decode_pc): Ditto.
 220
 221 Tue Oct 29 12:13:52 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 222
 223         * interp.c (sim_size): Now allocates unified memory for imap segments
 224         0,1,2, and 127. Initializes imap0 and imap1 to 0x1000.  Initializes dmap to 0.
 225         (sim_write): Just call xfer_mem().
 226         (sim_read): Just call xfer_mem().
 227         (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
 228         (dmem_addr): New function. Reads dmap register and translates data
 229         addresses to local addresses.
 230         (pc_addr): New function. Reads imap register and computes local address
 231         corresponding to contents of the PC.
 232         (sim_resume): Change to use pc_addr().
 233         (sim_create_inferior): Change reinitialization code. Also reinitializes
 234         imap[01] and dmap.
 235         (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
 236         (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
 237
 238         * simops.c (MEMPTR): Redefine to use dmem_addr().
 239         (OP_5F00): Replace references to STate.imem with dmem_addr().
 240
 241         * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
 242         (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
 243         (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
 244
 245 Tue Oct 22 15:22:33 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 246
 247         * d10v_sim.h (_ins_type): Reorganize, so that we can provide
 248         better statistics, like not counting NOPS as parallel
 249         instructions, and printing total cycles.
 250         (ins_type_counters): Make unsigned long.
 251         (left_nops,right_nops): Fold into ins_type_counters.
 252
 253         * simops.c (trace_input_func): Print new instruction types.
 254         Handle OP_R2R3 as input types.
 255         (OP_{38000000,7000}): Correctly sign extend bytes.
 256         (OP_5E00): Don't count NOPs as parallel instructions.
 257         (OP_460B): Remove unused variable.
 258         (OP_5F00): Ditto.
 259
 260         * interp.c (ins_type_counters): Make unsigned long.
 261         (left_nops,right_nops): Delete.
 262         (most functions): Add prototypes.
 263         (INLINE): If GCC and optimize define as __inline__.
 264         ({,lookup_}hash,get_operands): Declare as INLINE.
 265         (do_parallel): Count conditional operations.
 266         (add_commas): New function, to add commas every 3 digits.
 267         (sim_size): Call add_commas to print numbers.
 268         (sim_{open,resume}): Delete unused variables.
 269         (sim_info): Provide better statistics.
 270         (sim_read): Add int return type.
 271
 272 Mon Oct 21 16:16:26 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 273
 274         * interp.c (sim_resume): Change the way single-stepping and exceptions
 275         are handled so single-stepping works again.
 276
 277 Thu Oct 17 12:24:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 278
 279         * endian.c: Optimize simulated loads/stores on x86, AIX, and big
 280         endian hosts.
 281
 282         * configure.in (--enable-sim-bswap): New switch to enable using
 283         the BSWAP instruction on x86's.
 284         * configure: Regenerate.
 285
 286         * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
 287         support.
 288
 289 Wed Oct 16 13:50:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 290
 291         * endian.c: New file.  Move endian functions here from interp.c.
 292         Optimize code, and make it work as either inline functions or as a
 293         separate file.
 294
 295         * interp.c: Move endian functions from here to endian.c.
 296
 297         * Makefile.in (INCLUDE): Add endian.c.
 298         (run,libsim.a): Add dependency on endian.o.
 299         (endian.o): Add dependency.
 300
 301         * d10v_sim.h (read/write support): Always go through the machine
 302         independent endian functions.  If compiling with GCC and
 303         optimizing, include endian.c so the endian functions are inlined.
 304
 305         * simops.c (OP_5F00): Correct tracing of accumulators.
 306
 307 Tue Oct 15 10:57:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 308
 309         * simops.c (OP_5F00): Add support for getpid, kill system calls.
 310
 311         * interp.c (do_{2_short,parallel}): If an exception is raised,
 312         don't execute the second instruction.
 313
 314 Sat Oct 12 22:17:43 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 315
 316         * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
 317         temporary in case the register is overriden when loading.
 318         (OP_6200): Output type is OP_DREG for tracing.
 319
 320 Fri Oct  4 23:46:18 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 321
 322         * d10v_sim.h (struct _state): Add mem_{min,max} fields.
 323
 324         * interp.c (sim_size): Initialize mem_{min,max} fields.
 325         (sim_write): Update mem_{min,max} fields.
 326         (sim_resume): If PC is not in the minimum/maximum memory range,
 327         abort.
 328         (sim_create_inferior): Preserve mem_{min,max} fields.
 329
 330 Fri Sep 27 13:11:58 1996  Mark Alexander  <marka@cygnus.com>
 331
 332         * simops.c (OP_5F00): Add support for time() system call.
 333
 334 Wed Sep 25 16:31:41 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 335
 336         * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
 337         stored if tracing.
 338         (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
 339         system calls.
 340
 341 Mon Sep 23 17:55:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 342
 343         * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
 344         (trace_input_func): Add support for  OP_{CONSTANT8,R2,R3}.
 345         (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
 346         to call/subroutine returns to trace the first two arguments and
 347         the return value.  For small jumps, use CONSTANT8, not CONSTANT16.
 348
 349 Fri Sep 20 15:36:45 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 350
 351         * interp.c (sim_create_inferior): Reinitialize State every time
 352         sim_create_inferior() is called.
 353
 354 Thu Sep 19 21:38:20 1996  Michael Meissner  <meissner@wogglebug.ziplink.net>
 355
 356         * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
 357         on comparisons.
 358         (OP_401): Fix tracing information.
 359
 360 Thu Sep 19 10:30:22 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 361
 362         * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
 363         (trace_input_func): Use them.
 364         (trace_input_func): Make sure there is a trailing space after the
 365         instruction.
 366         (OP_6200): Fix tracing info.
 367
 368         * Makefile.in (run): Add dependencies on libbfd.a and
 369         libiberity.a.
 370
 371 Wed Sep 18 09:13:25 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 372
 373         * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
 374         numbers and function names in debug trace.
 375         (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
 376         DEBUG_LINE_NUMBER.
 377         (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
 378         and exit system call trap being executed.
 379
 380         * interp.c (sim_stop_reason): Set exit code correctly for stop
 381         instruction and exit system call trap.
 382
 383         * configure.in (--enable-sim-cflags): Remove trace case.
 384         (--enable-sim-debug): New switch to set the debug values.
 385         * configure: Regenerate.
 386
 387         * simops.c (trace_{input,output}_func): Rename from
 388         trace_{input,output}.
 389         (trace_{input,output}): Call trace_{input,output}_func if
 390         d10v_debug is non-zero.
 391         (SIZE_INSTRUCTION): Cut down to 8.
 392         (SIZE_OPERANDS): Cut down to 18.
 393         (SIZE_LOCATION): New value for size of line number, function name
 394         field.
 395         (init_text_p,text{,_start,_end}): New static variables for
 396         printing line number and function name.
 397         (exec_bfd): New external that run.c sets.
 398         (trace_input_func): Print line number and function name if
 399         available and if desired.
 400         (OP_4E09): Don't print out DBT message.
 401         (OP_5FE0): Set exception field to SIG_D10V_STOP.
 402         (OP_5F00): Set exception field to SIG_D10V_EXIT.
 403
 404 Sat Sep 14 22:18:43 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 405
 406         * interp.c (do_2_short): If the instruction encodes jump->ins,
 407         don't do the second instruction if the jump succeeds.
 408
 409 Fri Sep 13 22:35:19 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 410
 411         * simops.c (OP_5F00): Use unknown traps to print all GPRs,
 412         accumulators, PC, and F0/F1/C flags.
 413
 414 Thu Sep 12 12:50:11 1996  Mark Alexander  <marka@cygnus.com>
 415
 416         * simops.c (OP_5F00): Fix problems with system calls.
 417
 418 Thu Sep 12 12:19:28 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 419
 420         * simops.c (OP_5F00): Correct tracing information for trap.
 421
 422 Wed Sep 11 18:55:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 423
 424         * Makefile.in (CSEARCH): Correctly find opcodes directory.
 425
 426 Mon Sep  9 13:27:26 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 427
 428         * simops.c (trace_output): Properly align accumulator output.
 429         (OP_3{0,2,4}00): Properly parenthesize test expression.  Add error
 430         if shift count is too high.
 431         (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
 432         (OP_4E09): Make cpfg properly trace the input flags.
 433         (op_types): Add OP_FLAG_OUTPUT.
 434         (trace_{input,output}): Support OP_FLAG_OUTPUT.
 435         (OP_31000000): This ld2w varient is a 16-bit memory reference, not
 436         an 8-bit memory reference instruction for tracing purposes.
 437         (OP_201): Addi needs to set the carry.
 438
 439 Fri Sep  6 17:56:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 440
 441         * simops.c (OP_2600, OP_2601): Changed min and max comparisons
 442         to use signed register values.
 443
 444 Wed Sep  4 11:35:17 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 445
 446         * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
 447         output.
 448         (_ins_type): New enumeration to specify which container an
 449         instruction is in, and whether it is part of a parallel operation.
 450         (_state): Add ins_type field.
 451         ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
 452         (ins_type_counters): Counters for the various instruction types.
 453         ({left,right}_nops): Counters for the number of nops in each
 454         container.
 455         (d10v_debug): New variable to indicate whether debugging is turned
 456         on.
 457
 458         * simops.c: (all functions): Change all #ifdef DEBUG code so that
 459         the input and output values can be traced, along with the
 460         instruction type.  Make the -t option enable tracing.
 461         (all functions): Change printf calls to use the printf_filtered
 462         function in the callback table.
 463
 464         * interp.c (_leftright): New enumeration to say whether 2 short
 465         instructions are done left first or right first.
 466         (do_{long,2_short,parallel}): Indicate in the machine state which
 467         type of instruction this is.  Count each of the types of
 468         instructions executed.
 469         (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
 470         flag is set.
 471         (sim_resume): Pass left/right indication to do_2_short.
 472         (all functions): Change printf calls to use the printf_filtered
 473         function in the callback table.
 474         (sim_trace): Turn on debug flag if DEBUG was defined, and call
 475         sim_resume.
 476         (sim_info): Print out statistics on instructions.
 477         (sim_{trace,create_inferior}): Eliminate extraneous output unless
 478         debugging.
 479         (sim_open): If args == -t and DEBUG was defined, set d10v_debug.
 480         Only initialize the hash table the first time sim_open is called.
 481
 482         * Makefile.in: Make objects depend on d10v_sim.h.
 483         ({,SIM_}CFLAGS): Include configure dependent switches.  Setting
 484         CFLAGS does not override host/target defines or SIM_CFLAGS.
 485         (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
 486         (run): By default, the math library is not needed to be linked
 487         in.
 488         ({BFD,LIBIBERTY}_LIB): Define as variables so they can be
 489         overridden.
 490         (VPATH): Don't set to anything but @srcdir@ to work with non-GNU
 491         makes.
 492         ({run,callback}.o): Provide explicit paths to their appropriate
 493         source directories.
 494         (gencode{,.o},d10v-opc.o): Split compilation into creating object
 495         and linking.  Instead of linking in libopcodes.a, just compile
 496         d10v-opc.o directly to handle canadian cross.
 497         (CSEARCH): Add opcodes directory.
 498
 499         * configure.in (--enable-sim-cflags): New switch to allow user to
 500         set the defaults.
 501         (CC_FOR_BUILD): Deal with canadian crosses.
 502         * configure: Regenerate.
 503
 504 Wed Sep 04 04:45:34 1996  Mark Alexander  <marka@cygnus.com>
 505
 506         * simops.c: Include correct syscall.h for d10v, not host's.
 507         Fix #ifdef SYS_stat.
 508
 509 Tue Sep  3 14:00:04 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 510
 511         * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
 512         Add trap 2 to be printf and trap 3 to be putchar.
 513
 514 Wed Aug 28 21:42:34 1996  Mark Alexander  <marka@cygnus.com>
 515
 516         * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
 517         for low-level system calls.
 518
 519 Wed Aug 28 17:33:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 520
 521         * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
 522
 523 Mon Aug 26 18:30:28 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 524
 525         * d10v_sim.h (SEXT32): Added.
 526         * interp.c: Commented out printfs.
 527         * simops.c:  Fixed error in sb and st2w.
 528
 529 Thu Aug 15 13:30:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 530
 531         * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
 532         DSP instructions.  Added modulo addressing.
 533
 534 Sun Aug 11 12:57:15 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 535
 536         * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
 537
 538 Fri Aug  2 17:44:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 539
 540         * d10v_sim.h, simops.c: Snapshot.
 541
 542 Thu Aug  1 17:05:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 543
 544         * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
 545         gencode.c, interp.c, simops.c: Created.
 546