1 2021-02-21 Mike Frysinger <vapier@gentoo.org>
3 * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
4 * aclocal.m4, configure: Regenerate.
6 2021-02-13 Mike Frysinger <vapier@gentoo.org>
8 * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
9 * aclocal.m4, configure: Regenerate.
11 2021-02-06 Mike Frysinger <vapier@gentoo.org>
13 * configure: Regenerate.
15 2021-01-11 Mike Frysinger <vapier@gentoo.org>
17 * config.in, configure: Regenerate.
18 * interp.c, simops.c: Delete HAVE_STRING_H, HAVE_STRINGS_H,
19 HAVE_STDLIB_H, and strings.h include.
21 2021-01-09 Mike Frysinger <vapier@gentoo.org>
23 * d10v_sim.h (State): Change to an extern.
24 * interp.c (State): Define.
26 2021-01-09 Mike Frysinger <vapier@gentoo.org>
28 * configure: Regenerate.
30 2021-01-09 Mike Frysinger <vapier@gentoo.org>
32 * configure.ac (SIM_AC_OPTION_WARNINGS): Pass "no".
33 * configure: Regenerate.
35 2021-01-08 Mike Frysinger <vapier@gentoo.org>
37 * configure: Regenerate.
39 2021-01-04 Mike Frysinger <vapier@gentoo.org>
41 * configure: Regenerate.
43 2017-09-06 John Baldwin <jhb@FreeBSD.org>
45 * configure: Regenerate.
47 2016-01-10 Mike Frysinger <vapier@gentoo.org>
49 * config.in, configure: Regenerate.
51 2016-01-10 Mike Frysinger <vapier@gentoo.org>
53 * configure: Regenerate.
55 2016-01-10 Mike Frysinger <vapier@gentoo.org>
57 * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
58 * configure: Regenerate.
60 2016-01-10 Mike Frysinger <vapier@gentoo.org>
62 * configure: Regenerate.
64 2016-01-10 Mike Frysinger <vapier@gentoo.org>
66 * configure: Regenerate.
68 2016-01-10 Mike Frysinger <vapier@gentoo.org>
70 * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
71 * configure: Regenerate.
73 2016-01-10 Mike Frysinger <vapier@gentoo.org>
75 * configure: Regenerate.
77 2016-01-10 Mike Frysinger <vapier@gentoo.org>
79 * configure: Regenerate.
81 2016-01-09 Mike Frysinger <vapier@gentoo.org>
83 * config.in, configure: Regenerate.
85 2016-01-06 Mike Frysinger <vapier@gentoo.org>
87 * interp.c (sim_open): Mark argv const.
88 (sim_create_inferior): Mark argv and env const.
90 2016-01-04 Mike Frysinger <vapier@gentoo.org>
92 * endian.c (get_word): Delete all arch/big endian logic.
93 (get_longword, write_word, write_longword): Likewise.
95 2016-01-03 Mike Frysinger <vapier@gentoo.org>
97 * interp.c (sim_open): Update sim_parse_args comment.
99 2016-01-03 Mike Frysinger <vapier@gentoo.org>
101 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
102 * configure: Regenerate.
104 2016-01-02 Mike Frysinger <vapier@gentoo.org>
106 * configure: Regenerate.
108 2015-12-30 Mike Frysinger <vapier@gentoo.org>
110 * wrapper.c (d10v_reg_store, d10v_reg_fetch): Define.
111 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
112 (sim_store_register): Rename to ...
113 (d10v_reg_store): ... this. Rename cpu to sd.
114 (sim_fetch_register): Rename to ...
115 (d10v_reg_fetch): ... this. Rename cpu to sd.
117 2015-12-27 Mike Frysinger <vapier@gentoo.org>
119 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
121 2015-12-26 Mike Frysinger <vapier@gentoo.org>
123 * config.in, configure: Regenerate.
125 2015-11-15 Mike Frysinger <vapier@gentoo.org>
127 * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
129 2015-11-15 Mike Frysinger <vapier@gentoo.org>
131 * interp.c (sim_open): Delete sim_create_inferior call.
133 2015-11-15 Mike Frysinger <vapier@gentoo.org>
135 * d10v_sim.h (d10v_callback): Delete.
136 * interp.c (d10v_callback): Delete.
137 (do_long, do_2_short, do_parallel, set_dmap_register,
138 set_imap_register, xfer_mem, dmem_addr, imem_addr, sim_info,
139 sim_create_inferior): Replace d10v_callback->printf_filtered
141 (sim_open): Delete d10v_callback assignment.
142 * simops.c (move_to_cr, trace_input_func, do_trace_output_flush,
143 do_trace_output_finish, trace_output_40, trace_output_32,
144 trace_output_16, trace_output_void, trace_output_flag, OP_5F20,
145 OP_5201, OP_27000000, OP_3220, OP_3400, OP_3000, OP_6C1F, OP_6C01,
146 OP_6E1F, OP_6E01): Replace d10v_callback->printf_filtered with
147 sim_io_printf and d10v_callback->flush_stdout with
149 (OP_5F00): Likewise. Rename d10v_callback to cb.
151 2015-11-15 Mike Frysinger <vapier@gentoo.org>
153 * Makefile.in (SIM_OBJS): Add sim-reason.o, sim-resume.o, and
155 * d10v_sim.h (struct d10v_memory): Delete fault member.
156 (struct _state): Delete exception member.
157 * interp.c (lookup_hash): Call sim_engine_halt instead of setting
159 (do_2_short, do_parallel): Delete State.exception checks.
160 (sim_size): Mark static.
161 (map_memory): Call sim_engine_halt instead of returning fault.
162 Call xcalloc instead of calloc and checking the return.
163 (dmem_addr): Call sim_engine_halt when phys_size is 0.
164 (imem_addr): Likewise.
165 (stop_simulator, sim_stop, sim_stop_reason): Delete.
166 (sim_resume): Rename to ...
167 (step_once): ... this. Delete State.exception code and move
168 siggnal checking to sim_engine_run.
169 (sim_engine_run): New function.
170 * simops.c (EXCEPTION): Define.
171 (move_to_cr): Call EXCEPTION instead of setting State.exception.
172 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
173 OP_6601, OP_6201, OP_6200, OP_33010000, OP_5201, OP_27000000,
174 OP_2F000000, OP_3220, OP_3200, OP_3400, OP_3000, OP_34000000,
175 OP_6800, OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000,
176 OP_6A00, OP_6E1F, OP_6A01, OP_6E01, OP_37010000, OP_5FE0): Likewise.
177 (OP_5F20): Call sim_engine_halt instead of setting State.exception.
178 (OP_5F00): Call sim_engine_halt and EXCEPTION instead of setting
181 2015-11-15 Mike Frysinger <vapier@gentoo.org>
183 * d10v_sim.h (struct simops): Add SIM_DESC and SIM_CPU to func args.
184 (SET_CREG, SET_HW_CREG, SET_PSW_BIT): Pass sd and cpu to move_to_cr.
185 (dmem_addr, imem_addr, move_to_cr): Add SIM_DESC and SIM_CPU args.
186 (RB, SW, RW, SLW, RLW): Pass sd and cpu to dmem_addr.
187 * endian.c: Change d10v_sim.h include to sim-main.h.
188 * gencode.c: Likewise. Add SIM_DESC and SIM_CPU args to all OPs.
189 * interp.c (lookup_hash, do_long, do_2_short, do_parallel,
190 map_memory, set_dmap_register, dmap_register, set_imap_register,
191 imap_register, sim_d10v_translate_dmap_addr, xfer_mem,
192 sim_d10v_translate_imap_addr, sim_d10v_translate_addr): Add
193 SIM_DESC and SIM_CPU args and adjust all callers.
195 (sim_open): Do not assign trace_sd.
196 (sim_resume, sim_create_inferior, sim_fetch_register,
197 sim_store_register): Set up cpu from the first one in sd.
198 * simops.c (move_to_cr): Add SIM_DESC and SIM_CPU args.
199 (trace_input_func, trace_input, do_trace_output_finish,
200 do_trace_output_finish, trace_output_40, trace_output_32,
201 trace_output_16, trace_output_void, trace_output_flag): Add
203 (trace_input_func): Likewise. Change trace_sd to sd.
204 (OP_*): Add SIM_DESC and SIM_CPU args to all OP funcs.
206 2015-11-14 Mike Frysinger <vapier@gentoo.org>
208 * interp.c (sim_close): Delete.
210 2015-11-10 Mike Frysinger <vapier@gentoo.org>
212 * interp.c (sim_d10v_translate_dmap_addr): Mark static.
213 (sim_d10v_translate_imap_addr): Likewise.
214 (sim_d10v_translate_addr): Likewise.
216 2015-06-23 Mike Frysinger <vapier@gentoo.org>
218 * configure: Regenerate.
220 2015-06-12 Mike Frysinger <vapier@gentoo.org>
222 * configure: Regenerate.
224 2015-06-12 Mike Frysinger <vapier@gentoo.org>
226 * configure: Regenerate.
228 2015-04-18 Mike Frysinger <vapier@gentoo.org>
230 * sim-main.h (SIM_CPU): Delete.
232 2015-04-18 Mike Frysinger <vapier@gentoo.org>
234 * sim-main.h (sim_cia): Delete.
236 2015-04-17 Mike Frysinger <vapier@gentoo.org>
238 * sim-main.h (CIA_GET, CIA_SET): Delete.
240 2015-04-17 Mike Frysinger <vapier@gentoo.org>
242 * interp.c (d10v_pc_get, d10v_pc_set): New functions.
243 (sim_open): Declare new local var i. Call CPU_PC_FETCH &
244 CPU_PC_STORE for all cpus.
246 2015-04-15 Mike Frysinger <vapier@gentoo.org>
248 * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
249 * sim-main.h (STATE_CPU): Delete.
251 2015-04-13 Mike Frysinger <vapier@gentoo.org>
253 * configure: Regenerate.
255 2015-04-06 Mike Frysinger <vapier@gentoo.org>
257 * Makefile.in (SIM_OBJS): Delete sim-engine.o.
259 2015-04-02 Mike Frysinger <vapier@gentoo.org>
261 * interp.c (lookup_hash): Change SIGILL to GDB_SIGNAL_ILL.
262 (sim_resume): Change SIGBUS/SIGSEGV to GDB_SIGNAL_BUS, SIGILL to
263 GDB_SIGNAL_ILL, and SIGTRAP to GDB_SIGNAL_TRAP.
265 2015-04-01 Mike Frysinger <vapier@gentoo.org>
267 * interp.c (sim_set_profile, sim_set_profile_size): Delete.
269 2015-03-31 Mike Frysinger <vapier@gentoo.org>
271 * Makefile.in (simops.o): New rule.
273 2015-03-30 Mike Frysinger <vapier@gentoo.org>
275 * d10v_sim.h (text, text_start, text_end, prog_bfd): Delete.
276 (SEXT8, SEXT16, SEXT32, MASK32): Undefine.
277 * interp.c: Delete run-sim.h and d10v_sim.h includes. Include
278 sim-main.h and sim-options.h.
279 (myname, sim_kind, init_text_p, prog_bfd_was_opened_p, prog_bfd,
280 text, text_start, text_end, decode_pc, sim_set_profile,
281 sim_set_profile_size, sim_set_trace, sim_set_callbacks,
282 sim_trace, sim_do_command, sim_load): Delete.
283 (INLINE): Delete define.
284 (free_state): New function.
285 (trace_sd): Declare global variable.
286 (sim_open): Rewrite to use new common logic.
287 (sim_close): Delete body.
288 * Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS): Delete.
289 (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
290 * sim-main.h: New file.
291 * simops.c: Change d10v_sim.h include to sim-main.h.
292 (trace_input_func): Rewrite pc checks to use trace_sd.
294 2015-03-30 Mike Frysinger <vapier@gentoo.org>
296 * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK.
297 * interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL,
298 ui_loop_hook_counter, deprecated_ui_loop_hook): Delete.
299 (sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code.
301 2015-03-30 Mike Frysinger <vapier@gentoo.org>
303 * Makefile.in (gencode.o, d10v-opc.o): Add $(WARN_CFLAGS).
304 (gencode): Add $(BUILD_LDFLAGS).
305 * endian.c (get_word, get_longword, get_longlong, write_word,
306 write_longword, write_longlong): Convert old style prototypes.
307 * gencode.c: Include string.h.
308 (main): Convert old style prototype.
309 (write_header): Convert old style prototype and fix printf format.
310 (write_template, write_opcodes): Likewise.
311 (check_opcodes): Mark static void.
312 * interp.c: Include inttypes.h and run-sim.h.
313 (hash, lookup_hash, decode_pc, do_long, do_2_short, do_parallel,
314 add_commas, sim_size, sim_write, sim_read, sim_open, sim_close,
315 sim_set_profile, sim_set_profile_size, sim_stop, +sim_resume,
316 sim_info, sim_set_callbacks, sim_stop_reason, sim_fetch_register,
317 sim_store_register, sim_do_command, sim_load): Convert old style
319 (sim_create_inferior): Fix pointer cast to use uintptr_t.
320 * simops.c (strrchr): Delete prototype.
321 (trace_input_func): Mark name static.
322 (trace_input_func, trace_output_void, trace_output_flag): Convert old style
324 (OP_*): Convert old style prototypes.
326 2015-03-30 Mike Frysinger <vapier@gentoo.org>
328 * Makefile.in (interp.o, simops.o, endian.o, table.o): Delete rules.
329 * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
330 SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and
331 SIM_AC_OPTION_INLINE.
332 * config.in, configure: Regenerate.
333 * interp.c (sim_trace): Define.
335 2015-03-16 Mike Frysinger <vapier@gentoo.org>
337 * config.in, configure: Regenerate.
339 2015-03-14 Mike Frysinger <vapier@gentoo.org>
341 * Makefile.in (SIM_EXTRA_CFLAGS): Add
342 -DSIM_USE_DEPRECATED_RUN_FRONTEND.
343 (SIM_RUN_OBJS): Set to run.o.
345 2015-03-14 Mike Frysinger <vapier@gentoo.org>
347 * configure.ac (AC_CHECK_HEADERS): Delete.
348 * aclocal.m4, configure: Regenerate.
350 2014-08-19 Alan Modra <amodra@gmail.com>
352 * configure: Regenerate.
354 2014-08-15 Roland McGrath <mcgrathr@google.com>
356 * configure: Regenerate.
357 * config.in: Regenerate.
359 2014-03-10 Mike Frysinger <vapier@gentoo.org>
361 * interp.c (sim_do_command): Add const to cmd.
363 2014-03-05 Mike Frysinger <vapier@gentoo.org>
365 * interp.c (sim_load): Add const to prog.
367 2014-03-04 Mike Frysinger <vapier@gentoo.org>
369 * configure: Regenerate.
371 2013-09-23 Alan Modra <amodra@gmail.com>
373 * configure: Regenerate.
375 2013-06-03 Mike Frysinger <vapier@gentoo.org>
377 * aclocal.m4, configure: Regenerate.
379 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
381 * configure: Rebuild.
383 2012-06-19 Joel Brobecker <brobecker@adacore.com>
385 * interp.c: #include "config.h" instead of "sysdep.h".
386 Add conditional include of string.h or strings.h, as well as
387 conditional include of stdlib.h.
389 2012-06-15 Joel Brobecker <brobecker@adacore.com>
391 * config.in, configure: Regenerate.
393 2012-05-24 Pedro Alves <palves@redhat.com>
397 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
399 2012-03-24 Mike Frysinger <vapier@gentoo.org>
401 * aclocal.m4, config.in, configure: Regenerate.
403 2011-12-03 Mike Frysinger <vapier@gentoo.org>
405 * aclocal.m4: New file.
406 * configure: Regenerate.
408 2011-10-17 Mike Frysinger <vapier@gentoo.org>
410 * configure.ac: Change include to common/acinclude.m4.
412 2011-10-17 Mike Frysinger <vapier@gentoo.org>
414 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
415 call. Replace common.m4 include with SIM_AC_COMMON.
416 * configure: Regenerate.
418 2010-04-14 Mike Frysinger <vapier@gentoo.org>
420 * interp.c (sim_write): Add const to buffer arg.
422 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
424 * configure: Regenerate.
426 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
428 * config.in: Regenerate.
429 * configure: Likewise.
431 * configure: Regenerate.
433 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
435 * configure: Regenerate to track ../common/common.m4 changes.
438 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
439 Daniel Jacobowitz <dan@codesourcery.com>
440 Joseph Myers <joseph@codesourcery.com>
442 * configure: Regenerate.
444 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
446 * acconfig.h: Remove.
447 * config.in: Regenerate.
449 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
451 * configure: Regenerated.
453 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
455 * configure: Regenerated.
457 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
459 * configure: Regenerated.
461 2006-04-18 Nick Clifton <nickc@redhat.com>
463 * interp.c (sim_stop_reason): Fix typo.
465 2005-11-28 Mark Mitchell <mark@codesourcery.com>
467 * interp.c (gdb/signals.h): Include it.
468 (sim_stop_reason): Use TARGET_SIGNAL_*.
470 2005-03-23 Mark Kettenis <kettenis@gnu.org>
472 * configure: Regenerate.
474 2005-01-14 Andrew Cagney <cagney@gnu.org>
476 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
477 explicit call to AC_CONFIG_HEADER.
478 * configure: Regenerate.
480 2005-01-12 Andrew Cagney <cagney@gnu.org>
482 * configure.ac: Update to use ../common/common.m4.
483 * configure: Re-generate.
485 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
487 * configure: Regenerated to track ../common/aclocal.m4 changes.
489 2005-01-07 Andrew Cagney <cagney@gnu.org>
491 * configure.ac: Rename configure.in, require autoconf 2.59.
492 * configure: Re-generate.
494 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
496 * configure: Regenerate for ../common/aclocal.m4 update.
498 2004-06-28 Andrew Cagney <cagney@gnu.org>
500 * interp.c (sim_resume): Rename ui_loop_hook to
501 deprecated_ui_loop_hook.
503 2003-10-30 Andrew Cagney <cagney@redhat.com>
505 * simops.c: Replace "struct symbol_cache_entry" with "struct
508 2003-06-22 Andrew Cagney <cagney@redhat.com>
510 * interp.c (xfer_mem): Simplify. Only do a single partial
511 transfer. Problem reported by Tom Rix.
513 2003-05-07 Andrew Cagney <cagney@redhat.com>
515 * interp.c (sim_d10v_translate_addr): Add "regcache" parameter.
516 (sim_d10v_translate_imap_addr): Ditto.
517 (sim_d10v_translate_dmap_addr): Ditto.
518 (xfer_mem): Pass NULL regcache to sim_d10v_translate_addr.
519 (dmem_addr): Pass NULL regcache to sim_d10v_translate_dmap_addr.
520 (dmap_register, imap_register): Add "regcache" parameter.
521 (imem_addr): Pass NULL regcache to sim_d10v_translate_imap_addr.
522 (sim_fetch_register): Pass NULL regcache to imap_register and
525 2003-02-27 Andrew Cagney <cagney@redhat.com>
527 * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
529 2002-11-13 Andrew Cagney <cagney@redhat.com>
531 * simops.c: Include <string.h>.
533 2002-06-17 Andrew Cagney <cagney@redhat.com>
535 * d10v_sim.h (SET_PSW_BIT): Add cast to avoid inverting an enum.
537 2002-06-16 Andrew Cagney <ac131313@redhat.com>
539 * configure: Regenerated to track ../common/aclocal.m4 changes.
541 2002-06-13 Tom Rix <trix@redhat.com>
543 * interp.c (xfer_mem): Fix transfers across multiple segments.
545 2002-06-09 Andrew Cagney <cagney@redhat.com>
547 * Makefile.in (INCLUDE): Update path to callback.h.
548 * gencode.c: Do not include "callback.h".
549 * d10v_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
552 2002-06-08 Andrew Cagney <cagney@redhat.com>
554 * interp.c (sim_fetch_register): Fix name of enum used in cast.
555 (sim_store_register): Ditto.
557 2002-06-02 Elena Zannoni <ezannoni@redhat.com>
559 From Jason Eckhardt <jle@redhat.com>
560 * d10v_sim.h (INC_ADDR): Correctly handle the case where MOD_E is
561 less than MOD_S (post-decrement).
563 2002-06-01 Andrew Cagney <ac131313@redhat.com>
565 * interp.c (sim_fetch_register, sim_store_register): Use a switch
566 statement and enums from "sim-d10v.h".
568 2002-05-28 Elena Zannoni <ezannoni@redhat.com>
570 * interp.c (sim_create_inferior): Add comment.
572 From Alan Matsuoka <alanm@redhat.com>:
573 From 2001-04-27 Jason Eckhardt <jle@cygnus.com>:
574 * simops.c (OP_4400): Output "mvf0f" instead of "mf0f".
575 (OP_4401): Output "mvf0t" instead of "mf0t".
576 (OP_460B): Do not output a flag register.
577 (OP_4609): Do not output a flag register.
579 2002-05-23 Andrew Cagney <ac131313@redhat.com>
581 * Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
582 * interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
584 2001-08-01 John R. Moore <jmoore@redhat.com>
586 * interp.c (sim_create_inferior): Removed a hack that stated
587 it was setting r0/r1 with argc/argv.
589 2001-04-15 J.T. Conklin <jtc@redback.com>
591 * Makefile.in (simops.o): Add simops.h to dependency list.
593 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
595 * configure: Regenerated to track ../common/aclocal.m4 changes.
597 Tue Apr 18 16:26:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
599 * interp.c (sim_resume): Deliver SIGILL.
600 (lookup_hash): Do not print SIGILL message.
602 Tue Feb 22 18:24:56 2000 Andrew Cagney <cagney@b1.cygnus.com>
604 * Makefile.in (SIM_EXTRA_CFLAGS): Define SIM_HAVE_ENVIRONMENT.
605 * interp.c (sim_set_trace): Replace sim_trace. Enable tracing.
607 Tue Feb 8 17:41:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
609 * d10v_sim.h (SIG_D10V_BUS): Define.
611 * simops.c (address_exception): Delete function.
612 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
613 OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
614 OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
615 OP_6E1F, OP_6A01, OP_6E01, OP_37010000): Replace call to
616 address_exception with code that sets SIG_D10V_BUS.
618 * interp.c (sim_resume): When SIGBUS or SIGSEGV, deliver a bus
619 error to the simulator before resuming execution.
620 (sim_trace): Check stop reason and use that to determine sim_trace
622 (sim_stop_reason): For SIG_D10V_BUS return a SIGBUS / SIGSEGV
625 Tue Jan 18 16:07:42 MST 2000 Diego Novillo <dnovillo@cygnus.com>
627 * interp.c (sim_create_inferior): Change internal initial value for
630 Mon Jan 3 02:06:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
632 * interp.c (lookup_hash): Stop the update of the PC when there was
633 an illegal instruction exception.
635 Mon Jan 3 00:14:33 2000 Andrew Cagney <cagney@b1.cygnus.com>
637 * simops.c (address_exception): New function.
638 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
639 OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
640 OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
641 OP_6E1F, OP_6A01, OP_6E01, OP_37010000): For "ld", "ld2w", "st"
642 and "st2w" check that the address is aligned.
644 1999-12-30 Chandra Chavva <cchavva@cygnus.com>
646 * d10v_sim.h (INC_ADDR): Added code to assign
647 proper address for loads with predec operations.
649 1999-11-25 Nick Clifton <nickc@cygnus.com>
651 * simops.c (OP_4E0F): New function: Simulate new bit pattern for
654 Fri Oct 29 18:34:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
656 * simops.c (move_to_cr): Don't allow user to set PSW.DM in either
659 Thu Oct 28 01:26:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
661 * simops.c (OP_5F20): Use SET_HW_PSW when updating PSW.
662 (PSW_HW_MASK): Declare.
664 * d10v_sim.h (move_to_cr): Add ``psw_hw_p'' parameter.
665 (SET_CREG, SET_PSW_BIT): Update.
666 (SET_HW_CREG, SET_HW_PSW): Define.
668 Sun Oct 24 21:38:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
670 * interp.c (sim_d10v_translate_dmap_addr): Fix extraction of IOSP
673 Sun Oct 24 16:04:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
675 * interp.c (sim_d10v_translate_addr): New function.
676 (xfer_mem): Rewrite. Use sim_d10v_translate_addr.
677 (map_memory): Make INLINE.
679 Sun Oct 24 13:45:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
681 * interp.c (sim_d10v_translate_dmap_addr): New function.
682 (dmem_addr): Rewrite. Use sim_d10v_translate_dmap_addr. Change
683 offset parameter to type uint16.
684 * d10v_sim.h (dmem_addr): Update declaration.
686 Sun Oct 24 13:07:31 1999 Andrew Cagney <cagney@b1.cygnus.com>
688 * interp.c (imap_register, set_imap_register, dmap_register,
689 set_imap_register): Use map_memory.
691 (sim_create_inferior): Initialize all DMAP registers. NOTE that
692 DMAP2, in internal memory mode, is set to 0x0000 and NOT
693 0x2000. This is consistent with the older d10v boards.
695 Sun Oct 24 11:22:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
697 * interp.c (sim_d10v_translate_imap_addr): New function.
698 (imem_addr): Rewrite. Use sim_d10v_translate_imap_addr.
699 (last_from, last_to): Declare.
701 Sun Oct 24 01:21:56 1999 Andrew Cagney <cagney@b1.cygnus.com>
703 * d10v_sim.h (struct d10v_memory): Define. Support very long
705 (struct _state): Replace imem, dmem and umem by mem.
706 (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, IMEM_SEGMENTS,
707 DMEM_SEGMENTS, UMEM_SEGMENTS): Define.
709 * interp.c (map_memory): New function.
710 (sim_size, xfer_memory, imem_addr, dmem_addr): Update.
711 (UMEM_SEGMENTS): Moveed to "d10v_sim.h".
712 (IMEM_SIZEDMEM_SIZE): Delete.
714 Sat Oct 23 20:06:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
716 * interp.c: Include "sim-d10v.h".
717 (imap_register, set_imap_register, dmap_register,
718 set_dmap_register, spi_register, spu_register, set_spi_register,
719 set_spu_register): New functions.
720 (sim_create_inferior): Update.
721 (sim_fetch_register, sim_store_register): Rewrite. Use enums
722 defined in sim-d10v.h.
724 * d10v_sim.h (DEBUG_MEMORY): Define.
725 (IMAP0, IMAP1, DMAP, SET_IMAP0, SET_IMAP1, SET_DMAP): Delete.
727 Sat Oct 23 18:41:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
729 * interp.c (sim_open): Allow a debug value to be passed to the -t
731 (lookup_hash): Don't exit on an illegal instruction.
732 (do_long, do_2_short, do_parallel): Check for failed instruction
735 Mon Oct 18 18:03:24 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
737 * simops.c (OP_3220): Fix trace output for illegal accumulator
740 1999-09-14 Nick Clifton <nickc@cygnus.com>
742 * simops.c: Disable setting of DM bit in PSW.
744 Wed Sep 8 19:34:55 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
746 * simops.c (op_types): Added new memory indirect type OP_MEMREF3.
747 (trace_input_func): Added support for OP_MEMREF3.
748 (OP_32010000): New instruction ld.
749 (OP_33010000): New instruction ld2w.
750 (OP_5209): New instruction sac.
751 (OP_4209): New instruction sachi.
752 (OP_3220): New instruction slae.
753 (OP_36010000): New instruction st.
754 (OP_37010000): New instruction st2w.
756 1999-09-09 Stan Shebs <shebs@andros.cygnus.com>
758 * interp.c (old_segment_mapping): New global.
759 (xfer_mem): Change the default segment mapping to be the way
760 that Mitsubishi prefers, but use the previous mapping if
761 old_segment_mapping is true.
762 (sim_open): Add an option -oldseg to get the old mapping.
763 (sim_create_inferior): Init mapping registers based on the
764 value of old_segment_mapping.
766 1999-09-07 Nick Clifton <nickc@cygnus.com>
768 * simops.c (OP_6601): Do not write back decremented address if
769 either of the destination registers was the same as the address
771 (OP_6201): Do not write back incremented address if either of the
772 destination registers was the same as the address register.
774 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
776 * configure: Regenerated to track ../common/aclocal.m4 changes.
778 1999-05-08 Felix Lee <flee@cygnus.com>
780 * configure: Regenerated to track ../common/aclocal.m4 changes.
782 1999-04-02 Keith Seitz <keiths@cygnus.com>
784 * interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK
786 (sim_resume): If the counter has expired, call the ui_loop_hook,
788 (UI_LOOP_POLL_INTERVAL): Define. Used to tweak the frequency of
790 * Makefile.in (SIM_EXTRA_CFLAGS): Include NEED_UI_LOOP_HOOK.
792 Wed Mar 10 19:32:13 1999 Nick Clifton <nickc@cygnus.com>
794 * simops.c: If load instruction with auto increment/decrement
795 addressing is used when the destination register is the same as
796 the address register, then ignore the auto increment/decrement.
798 Wed Mar 10 19:32:13 1999 Martin M. Hunt <hunt@cygnus.com>
800 * simops.c (OP_5F00): Ifdef SYS_stat case because
801 not all systems have it defined.
803 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
805 * simops.c (OP_5607): Correct saturation comparison/assignment.
806 (OP_1201, OP_1203, OP_17001200, OP_17001202,
807 OP_2A00, OP_2800, OP_2C00, OP_3200, OP_3201,
808 OP_1001, OP_1003, OP_17001000, OP_17001002): Ditto.
810 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
812 * simops.c (OP_5605): Sign extend MIN32 and MAX32 before saturation
818 1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com)
820 * simops.c (OP_1223): Sign extend MIN32 and MAX32 before saturation
823 Tue Nov 24 17:04:43 1998 Andrew Cagney <cagney@b1.cygnus.com>
825 * simops.c (sys/syscall.h): Include targ-vals.h instead.
826 (SYS_*): Replace with TARGET_SYS_*.
828 * Makefile.in: Add dependency on targ-vals.h.
829 (NL_TARGET): Define as NL_TARGET_d10v.
831 Wed Sep 30 00:06:32 1998 Andrew Cagney <cagney@amy.cygnus.com>
833 * interp.c (xfer_mem): Missing break, instruction memory case
834 flowed into unified memory case.
836 Wed Sep 30 10:14:18 1998 Nick Clifton <nickc@cygnus.com>
838 * simops.c: If load instruction with auto increment/decrement
839 addressing is used when the destination register is the same as
840 the address register, then ignore the auto increment/decrement.
842 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
844 * configure: Regenerated to track ../common/aclocal.m4 changes.
846 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
848 * configure: Regenerated to track ../common/aclocal.m4 changes.
851 Sun Apr 26 15:20:23 1998 Tom Tromey <tromey@cygnus.com>
853 * acconfig.h: New file.
854 * configure.in: Reverted change of Apr 24; use sinclude again.
856 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
858 * configure: Regenerated to track ../common/aclocal.m4 changes.
861 Fri Apr 24 11:20:06 1998 Tom Tromey <tromey@cygnus.com>
863 * configure.in: Don't call sinclude.
865 Fri Apr 24 11:04:46 1998 Andrew Cagney <cagney@chook.cygnus.com>
867 * interp.c (struct hash_entry): OPCODE and MASK are unsigned.
869 * d10v_sim.h (remote-sim.h, sim-config.h): Include.
871 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
873 * configure: Regenerated to track ../common/aclocal.m4 changes.
875 Wed Apr 1 12:59:17 1998 Andrew Cagney <cagney@b1.cygnus.com>
877 * simops.c (trace_input_func): Use move_from_cr / CREGS to obtain
879 (OP_OP_1000000, add3): Trace inputs before performing add.
880 (OP_5F00, <*>): Trace input registers before making system call.
881 (OP_5F00, <kill>): Trace R0, R1 not REGn.
882 (OP_5F00, <getpid>): Always return 47.
884 * d10v_sim.h (SLOT, SLOT_NR, SLOT_PEND_MASK, SLOT_PEND,
885 SLOT_DISCARD, SLOT_FLUSH): Define. An implementation of write
887 (struct _state): Add struct slot slot to global state variable.
888 (struct _state): Delete fields SM, EA, DB, DM, IE, RP, MD, FX, ST,
889 F0, F1, C from global State variable.
890 (struct _state): Add struct trace to global State variable.
891 (GPR, SET_GPR): Define. SET_GPR uses SLOT_PEND.
892 (PSW*, SET_PSW*): Define. SET_PSW* uses SET_CREG.
893 (CREG, SET_CREG, SET_*): Define. SET_CREG uses func move_to_cr.
894 (INC_ADDR): Re-implement. Use SET_GPR to update registers.
895 (JMP): Re-implement. Use SET_* to update registers.
897 * interp.c: Use new SET_* et.al. macros to fetch / store
899 (get_operands): Squirrel away trace values at start of each
901 (do_2_short): Flush pending writes before issuing second
903 (sim_resume): Flush pending writes at end of instruction cycle.
904 (sim_fetch_register, sim_store_register, sim_create_inferior):
905 After scheduling updates to registers using SET_*, flush updates.
906 (sim_resume): Re-order handling of RPT/repeat and IBA/hbreak so
907 that each sets pc using SET_* and last SET_* eventually winds out.
909 * simops.c: Use new SET_* et.al. macros to fetch / store
911 (move_to_cr): Add MASK argument for selective update of CREG bits.
912 Re-implement using new SET_* macros.
913 (trace_output_func, trace_output): Delete. Replace with.
914 (do_trace_output_flush, trace_output_finish, trace_output_40,
915 trace_output_32, trace_output_16, trace_output_void,
916 trace_output_flag): New functions. Handle specific trace cases.
917 (OP_*): Re-write tracing to use new trace_output_* functions.
918 (OP_*): Re-write to use new SET_* et.al. macros.
919 (FUNC, PARM[1-4], RETVAL, RETVAL32): Redo definition.
920 (RETVAL_HIGH, RETVAL_LOW): Delete, use RETVAL32.
922 Wed Apr 1 12:55:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
924 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
925 configure: Re-generate.
927 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
929 * configure: Regenerated to track ../common/aclocal.m4 changes.
931 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
933 * configure: Regenerated to track ../common/aclocal.m4 changes.
935 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
937 * configure: Regenerated to track ../common/aclocal.m4 changes.
939 Tue Feb 17 12:38:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
941 * interp.c (sim_store_register, sim_fetch_register): Pass in
942 length parameter. Return -1.
944 Mon Oct 27 14:43:33 1997 Fred Fish <fnf@cygnus.com>
946 * (dmem_addr): If address is illegal or in I/O space, signal a bus
947 error. Allocate unified memory on demand. Fix DMEM address
950 Mon Feb 16 10:27:53 1998 Andrew Cagney <cagney@b1.cygnus.com>
952 * simops.c (OP_5F20): Implement "dbt".
953 (OP_5F60): Implement "rtd".
955 * d10v_sim.h (DPC_CR): Define enum.
956 (DBT_VECTOR_START): Define
959 Fri Feb 13 15:15:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
961 * simops.c (move_to_cr): Sync regs[SP_IDX] with State.sp according
964 * d10v_sim.h (struct _state): Add sp, as holding area for SPI/SPU.
967 Wed Feb 11 16:53:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
969 * simops.c (OP_5F00): Call error instead of abort for unknown
972 * d10v_sim.h (enum): Define DPSW_CR.
974 * simops.c (move_to_cr): Mask out hardwired zero bits in DPSW.
976 Tue Feb 10 18:28:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
978 * interp.c (sim_write_phys): Delete.
979 (sim_load): Call sim_load_file with sim_write and LMA.
981 Mon Feb 9 12:05:01 1998 Andrew Cagney <cagney@b1.cygnus.com>
983 * interp.c: Rewrite xfer_mem so that it translates addresses as -
984 0x00... - DMAP translated memory, 0x01... IMAP translated memory,
985 0x10... - on-chip data, 0x11... - on-chip insn, 0x12... - unified
988 (imem_addr): New function - translate IMEM address.
989 (sim_resume): Use imem_addr to translate insn address, abort if
991 (sim_create_inferior): Write ARGV to memory using sim_write. Pass
992 argc/argv using r0/r1 not r2/r3.
993 (sim_size): Do not initialize IMAP/DMAP here.
994 (sim_open): Call sim_create_inferior and sim_size to initialize
996 (sim_create_inferior): Initialize IMAP/DMAP to hardware reset
998 (init_system): Delete.
999 (xfer_mem, sim_fetch_register, sim_store_register): Do not call
1001 (decode_pc): Check prog_bfd is defined before looking up .text
1004 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
1006 * configure: Regenerated to track ../common/aclocal.m4 changes.
1008 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
1010 * configure: Regenerated to track ../common/aclocal.m4 changes.
1012 Sun Jan 25 22:23:01 1998 Michael Meissner <meissner@cygnus.com>
1014 * interp.c (sim_stop_reason): Exit status is now in r0, not r2.
1016 Sat Jan 24 19:00:30 1998 Michael Meissner <meissner@cygnus.com>
1018 * d10v_sim.h (DEBUG_TRAP): New debug flag.
1020 * simops.c (OP_5F00): If DEBUG_TRAP is on, turn traps 0-14 into
1021 printing the registers.
1023 Thu Jan 22 17:54:01 1998 Michael Meissner <meissner@cygnus.com>
1025 * simops.c (op_types): New ABI, args are r0..r3, system call # is
1027 (trace_{in,out}put_func): Ditto.
1029 (OP_24800000): Ditto.
1033 Thu Jan 22 14:30:36 1998 Fred Fish <fnf@cygnus.com>
1035 * interp.c (UMEM_SEGMENTS): New define, set to 128.
1036 (sim_size): Use UMEM_SEGMENTS rather than hardwired constant.
1037 (sim_close): Reset prog_bfd to NULL after closing it. Also
1038 reset prog_bfd_was_opened_p after closing prog_bfd.
1039 (sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd.
1040 (sim_create_inferior): Get start address from abfd not prog_bfd.
1041 (xfer_mem): Do bounds checking on addresses and return zero length
1042 read/write on bad addresses, rather than aborting. Prepare to
1043 be able to handle xfers that cross segment boundaries, but not
1044 yet implemented. Only emit debug message when d10v_debug is
1045 set as well as DEBUG being defined.
1047 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
1049 * configure: Regenerated to track ../common/aclocal.m4 changes.
1051 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
1053 * configure: Regenerated to track ../common/aclocal.m4 changes.
1056 Tue Dec 9 10:28:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1058 * d10v_sim.h (RPT_S): Index cregs with RPT_S_CR not RPT_E_CR.
1059 (BPSW): Ditto for BPSW_CR and not PSW_CR.
1061 * simops.c (OP_5F40): JMP to BPC instead of assigning PC directly.
1063 Mon Dec 8 12:58:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
1065 * simops.c (OP_5F00): From Martin Hunt <hunt@cygnus.com>. Change
1066 reserved trap from 0 to 15. Add trap emulation code for 0-14.
1068 * interp.c (sim_resume): From Martin Hunt <hunt@cygnus.com>. Check
1071 * d10v_sim.h (AE_VECTOR_START, RIE_VECTOR_START,
1072 SDBT_VECTOR_START, TRAP_VECTOR_START): Define.
1074 * simops.c (OP_5F00): For "trap", mask out all but SM bit in PSW,
1076 (OP_5F00): For "trap", update BPSW with move_to_cr.
1078 Fri Dec 5 15:31:17 1997 Andrew Cagney <cagney@b1.cygnus.com>
1080 * d10v_sim.h (enum): Enumerate CR register names.
1081 (enum): Enumerate PSW bit values.
1082 (PSW): Obtain value uing move_from_cr.
1083 (MOD_S, MOD_E, BPSW): Make r-values.
1084 (move_from_cr, move_to_cr): Declare functions.
1086 * interp.c (sim_fetch_register, sim_store_register): Use
1087 move_from_cr and move_to_cr for CR register transfers.
1089 * simops.c (move_from_cr, move_to_cr): New functions.
1090 (OP_5F40): Move BPSW to PSW using move_to_cr and move_from_cr.
1091 (OP_5600): For "mvtc", use function move_to_cr.
1092 (OP_5200): For "mvfc", use function move_from_cr.
1094 Fri Dec 5 13:33:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1096 * simops.c (OP_5600): For "mvtc" MOD_E and MOD_S, ensure that the
1099 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
1101 * configure: Regenerated to track ../common/aclocal.m4 changes.
1103 Thu Dec 4 16:51:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
1105 * d10v_sim.h (struct _state): Add DM - PSW debug mask.
1107 * simops.c (OP_5600): For "mvtc", save PSW.DM.
1108 (OP_5200): Ditto for "mvfc".
1110 Wed Dec 3 17:27:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
1112 * d10v_sim.h (SEXT56): Define.
1114 * simops.c (OP_4201): For "rac", sign extend 56 bit value before
1117 * d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using
1120 Tue Dec 2 15:38:34 1997 Fred Fish <fnf@cygnus.com>
1122 * interp.c (sim_resume): Call do_2_short with LEFT_FIRST or
1123 RIGHT_FIRST, as appropriate, instead of hardcoded ints that
1124 don't match enum values.
1126 Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
1128 * simops.c (OP_3A00): For "macu", perform multiply stage using 32
1129 bit rather than 16 bit precision.
1130 (OP_3C00): For "mulxu", store unsigned product in ACC.
1131 (OP_3800): For "msbu", subtract unsigned product from ACC,
1132 (OP_0): For "sub", compute carry by comparing inputs.
1134 Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
1136 * simops.c (OP_1000): For "sub2w", compute carry by comparing
1139 Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
1141 * simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract,
1142 carry indicated by value > 0xffff.
1144 Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
1146 * interp.c (sim_resume): Don't set up SIGINT handler using signal,
1148 (sim_resume): Fix race condition of a direct assignment to
1149 stop_simulator, conditionally call sim_stop.
1150 (sim_stop_reason): Check stop_simulator returning SIGINT. Clear
1151 stop_simulator ready for next sim_resume call.
1152 (sim_ctrl_c): Delete function.
1154 Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
1156 * interp.c (sim_resume): For "REP", only check/update the PC when
1157 a branch instruction has not been executed.
1159 Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com>
1161 * simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign
1162 extend bit 44 all constants.
1163 (OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro.
1165 Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
1167 * d10v_sim.h: Include sim-types.h.
1168 (uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef
1169 using unsigned8 et.al. from sim-types.h.
1170 (SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with
1173 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1175 * interp.c (sim_write_phys): New function, write to physical
1176 instead of virtual memory.
1178 * interp.c (sim_load): Pass lma_p and sim_write_phys to
1181 Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com>
1183 * simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move
1184 exception generation code to OP_6E01.
1185 (OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception
1188 Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com>
1190 * simops.c (OP_6401): postdecrement on r15 is OK, remove exception.
1193 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1195 * configure: Regenerated to track ../common/aclocal.m4 changes.
1197 Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com>
1199 * interp.c (pc_addr): Discard upper bit(s) of PC in case
1200 IMAP1 selects unified memory.
1201 * d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing
1204 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
1206 * configure: Regenerated to track ../common/aclocal.m4 changes.
1208 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1210 * configure: Regenerated to track ../common/aclocal.m4 changes.
1212 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
1214 * configure: Regenerated to track ../common/aclocal.m4 changes.
1216 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
1218 * configure: Regenerated to track ../common/aclocal.m4 changes.
1220 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
1222 * configure: Regenerated to track ../common/aclocal.m4 changes.
1224 Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com>
1226 * interp.c (sim_resume): Increment PC at end of rep
1229 * simops.c (OP_4201): Fix rachi instruction.
1231 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1233 * configure: Regenerated to track ../common/aclocal.m4 changes.
1235 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1237 * configure: Regenerated to track ../common/aclocal.m4 changes.
1240 Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1242 * interp.c (sim_kill): Delete.
1243 (sim_create_inferior): Add ABFD argument.
1244 (sim_load): Move setting of PC from here.
1245 (sim_create_inferior): To here.
1246 (start_address): Delete variable.
1248 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1250 * configure: Regenerated to track ../common/aclocal.m4 changes.
1253 Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
1255 * interp.c (sim_open): Add ABFD argument.
1257 Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
1259 * interp.c (sim_open): Add callback argument.
1260 (sim_set_callbacks): Remove SIM_DESC argument.
1262 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1264 * configure: Regenerated to track ../common/aclocal.m4 changes.
1266 Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com>
1268 * interp.c (sim_open): Undo patch to add -E support.
1270 Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
1272 * interp.c (sim_stop): New function.
1274 Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com>
1276 * Makefile.in (SIM_OBJS): Add sim-load.o.
1277 * d10v_sim.h (exec_bfd): Rename to prog_bfd.
1278 * interp.c: #include bfd.h.
1279 (myname, sim_kind, start_address): New static locals.
1280 (prog_bfd_was_opened_p, prog_bfd): New static locals.
1281 (decode_pc): Update to use prog_bfd.
1282 (sim_open): Set sim_kind, myname. Ignore -E arg.
1283 (sim_close): Close prog_bfd if simulator opened it.
1284 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1285 (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
1286 Call sim_load_file to load file into simulator.
1287 * simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
1289 Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
1291 * simops.c (OP_5F00): Only provide system calls SYS_execv,
1292 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
1294 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1296 * configure: Regenerated to track ../common/aclocal.m4 changes.
1299 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1301 * interp.c (sim_open): New arg `kind'.
1303 * configure: Regenerated to track ../common/aclocal.m4 changes.
1305 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1307 * configure: Regenerated to track ../common/aclocal.m4 changes.
1309 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1311 * configure: Re-generate.
1313 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1315 * configure: Regenerate to track ../common/aclocal.m4 changes.
1317 * simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same
1318 as trap 0, which will be deprecated. Only set errno, if an error
1319 in fact was returned.
1321 Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com>
1323 * interp.c: Delete redundant prototypes of sim_foo fns.
1324 (sim_open): New SIM_DESC result. Argument is now in argv form.
1325 (other sim_*): New SIM_DESC argument.
1327 Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com>
1329 * simops.c (trace_{input,output}_func): Call flush_stdout from the
1332 (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
1333 (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
1334 setting the carry bit after an add or a subtract.
1336 Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com>
1338 * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
1339 40 bits of accumulators. Sign/zero extend as appropriate.
1341 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
1343 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1344 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1345 * configure.in: sinclude ../common/aclocal.m4.
1346 * configure: Regenerated.
1348 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1350 * configure configure.in Makefile.in: Update to new configure
1351 scheme which is more compatible with WinGDB builds.
1352 * configure.in: Improve comment on how to run autoconf.
1353 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1354 * Makefile.in: Use autoconf substitution to install common
1357 Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com)
1359 * gencode.c: patch to not #include "d10v_sim.h" which
1360 unecessarily includes bfd.h and causes wingdb configure
1363 Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1365 * interp.c (xfer_mem): Change unified memory to 0x0.
1367 Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1369 * simops.c (OP_3E01): Fix tracing information.
1370 (OP_300{0,1}): Do not propigate sign.
1372 Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com>
1374 * config.in (WORDS_BIGENDIAN): Add.
1375 * configure: Regenerated.
1376 * d10v_sim.h: #include "config.h"
1378 Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1380 * gencode.c (write_opcodes): Eliminate warnings when generated
1381 table.c is compiled.
1383 Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1385 * interp.c (sim_open): Cast result of calloc, and make sure NULL
1387 (dmem_addr): If address is illegal or in I/O space, signal a bus
1389 (pc_addr): Signal bus error, not illegal instruction for bogus
1392 Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com>
1394 * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
1395 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
1396 * configure.in: Simplify using macros in ../common/aclocal.m4.
1397 Call AC_CHECK_HEADERS(unistd.h).
1398 * configure: Regenerated.
1399 * config.in: New file.
1400 * interp.c: #include "callback.h".
1401 * simops.c: #include "config.h". #include <unistd.h> if present.
1403 Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1405 * d10v-sim.h (simops): Add flag is_long.
1406 (State): Add pc_changed. Instructions which update the PC should
1407 use the JMP macro which sets this.
1408 (JMP): New macro. Sets the PC and the pc_changed flag.
1410 * gencode.c (write_opcodes): Add is_long field.
1412 * interp.c (lookup_hash): If we blindly apply a short opcode's mask
1413 to a long opcode we could get a false match. Check the opcode size.
1414 (hash): Add a size field to the hash table.
1415 (sim_open): Initialize size field in hash table.
1416 (sim_resume): Change to logic for setting the PC. Used to increment the
1417 PC if it had not been changed. This didn't allow single-instruction loops.
1418 Now checks the flag State.pc_changed. Also now stops when ^C is received.
1419 (dmem_addr): Fix translation of data segments to unified memory.
1420 (sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
1422 * simops.c: Changed all branch and jump instructions to use new JMP macro.
1423 (OP_20000000): Corrected trace information to show this is a ldi.l, not
1424 a ldi.s instruction.
1426 Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1428 * interp.c (sim_fetch_register, sim_store_register): Fix bug where
1429 updating the accumulators was overwriting other parts of the global
1432 Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1434 * interp.c (bfd.h) Don't include it here any more.
1435 (text{,_start,_end}): Move here from simops.c and make extern.
1436 (decode_pc): New function to return the PC as an address that the
1438 (dmem_addr): Print decoded PC in error message.
1441 * simops.c (bfd.h) Don't include it here any more.
1442 (text{,_start,_end}): Move to simops.c.
1443 (trace_input_func): Move decoding of PC, and looking up .text
1446 * d10v_sim.h (bfd.h): Include it here.
1447 (text{,_start,_end}): Add external declarations.
1451 Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1453 * interp.c (sim_size): Now allocates unified memory for imap segments
1454 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
1455 (sim_write): Just call xfer_mem().
1456 (sim_read): Just call xfer_mem().
1457 (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
1458 (dmem_addr): New function. Reads dmap register and translates data
1459 addresses to local addresses.
1460 (pc_addr): New function. Reads imap register and computes local address
1461 corresponding to contents of the PC.
1462 (sim_resume): Change to use pc_addr().
1463 (sim_create_inferior): Change reinitialization code. Also reinitializes
1465 (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
1466 (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
1468 * simops.c (MEMPTR): Redefine to use dmem_addr().
1469 (OP_5F00): Replace references to STate.imem with dmem_addr().
1471 * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
1472 (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
1473 (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
1475 Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1477 * d10v_sim.h (_ins_type): Reorganize, so that we can provide
1478 better statistics, like not counting NOPS as parallel
1479 instructions, and printing total cycles.
1480 (ins_type_counters): Make unsigned long.
1481 (left_nops,right_nops): Fold into ins_type_counters.
1483 * simops.c (trace_input_func): Print new instruction types.
1484 Handle OP_R2R3 as input types.
1485 (OP_{38000000,7000}): Correctly sign extend bytes.
1486 (OP_5E00): Don't count NOPs as parallel instructions.
1487 (OP_460B): Remove unused variable.
1490 * interp.c (ins_type_counters): Make unsigned long.
1491 (left_nops,right_nops): Delete.
1492 (most functions): Add prototypes.
1493 (INLINE): If GCC and optimize define as __inline__.
1494 ({,lookup_}hash,get_operands): Declare as INLINE.
1495 (do_parallel): Count conditional operations.
1496 (add_commas): New function, to add commas every 3 digits.
1497 (sim_size): Call add_commas to print numbers.
1498 (sim_{open,resume}): Delete unused variables.
1499 (sim_info): Provide better statistics.
1500 (sim_read): Add int return type.
1502 Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1504 * interp.c (sim_resume): Change the way single-stepping and exceptions
1505 are handled so single-stepping works again.
1507 Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1509 * endian.c: Optimize simulated loads/stores on x86, AIX, and big
1512 * configure.in (--enable-sim-bswap): New switch to enable using
1513 the BSWAP instruction on x86's.
1514 * configure: Regenerate.
1516 * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
1519 Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1521 * endian.c: New file. Move endian functions here from interp.c.
1522 Optimize code, and make it work as either inline functions or as a
1525 * interp.c: Move endian functions from here to endian.c.
1527 * Makefile.in (INCLUDE): Add endian.c.
1528 (run,libsim.a): Add dependency on endian.o.
1529 (endian.o): Add dependency.
1531 * d10v_sim.h (read/write support): Always go through the machine
1532 independent endian functions. If compiling with GCC and
1533 optimizing, include endian.c so the endian functions are inlined.
1535 * simops.c (OP_5F00): Correct tracing of accumulators.
1537 Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1539 * simops.c (OP_5F00): Add support for getpid, kill system calls.
1541 * interp.c (do_{2_short,parallel}): If an exception is raised,
1542 don't execute the second instruction.
1544 Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1546 * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
1547 temporary in case the register is overriden when loading.
1548 (OP_6200): Output type is OP_DREG for tracing.
1550 Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1552 * d10v_sim.h (struct _state): Add mem_{min,max} fields.
1554 * interp.c (sim_size): Initialize mem_{min,max} fields.
1555 (sim_write): Update mem_{min,max} fields.
1556 (sim_resume): If PC is not in the minimum/maximum memory range,
1558 (sim_create_inferior): Preserve mem_{min,max} fields.
1560 Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com>
1562 * simops.c (OP_5F00): Add support for time() system call.
1564 Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1566 * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
1568 (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
1571 Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1573 * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
1574 (trace_input_func): Add support for OP_{CONSTANT8,R2,R3}.
1575 (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
1576 to call/subroutine returns to trace the first two arguments and
1577 the return value. For small jumps, use CONSTANT8, not CONSTANT16.
1579 Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1581 * interp.c (sim_create_inferior): Reinitialize State every time
1582 sim_create_inferior() is called.
1584 Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net>
1586 * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
1588 (OP_401): Fix tracing information.
1590 Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1592 * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
1593 (trace_input_func): Use them.
1594 (trace_input_func): Make sure there is a trailing space after the
1596 (OP_6200): Fix tracing info.
1598 * Makefile.in (run): Add dependencies on libbfd.a and
1601 Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1603 * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
1604 numbers and function names in debug trace.
1605 (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
1607 (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
1608 and exit system call trap being executed.
1610 * interp.c (sim_stop_reason): Set exit code correctly for stop
1611 instruction and exit system call trap.
1613 * configure.in (--enable-sim-cflags): Remove trace case.
1614 (--enable-sim-debug): New switch to set the debug values.
1615 * configure: Regenerate.
1617 * simops.c (trace_{input,output}_func): Rename from
1618 trace_{input,output}.
1619 (trace_{input,output}): Call trace_{input,output}_func if
1620 d10v_debug is non-zero.
1621 (SIZE_INSTRUCTION): Cut down to 8.
1622 (SIZE_OPERANDS): Cut down to 18.
1623 (SIZE_LOCATION): New value for size of line number, function name
1625 (init_text_p,text{,_start,_end}): New static variables for
1626 printing line number and function name.
1627 (exec_bfd): New external that run.c sets.
1628 (trace_input_func): Print line number and function name if
1629 available and if desired.
1630 (OP_4E09): Don't print out DBT message.
1631 (OP_5FE0): Set exception field to SIG_D10V_STOP.
1632 (OP_5F00): Set exception field to SIG_D10V_EXIT.
1634 Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1636 * interp.c (do_2_short): If the instruction encodes jump->ins,
1637 don't do the second instruction if the jump succeeds.
1639 Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1641 * simops.c (OP_5F00): Use unknown traps to print all GPRs,
1642 accumulators, PC, and F0/F1/C flags.
1644 Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com>
1646 * simops.c (OP_5F00): Fix problems with system calls.
1648 Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1650 * simops.c (OP_5F00): Correct tracing information for trap.
1652 Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1654 * Makefile.in (CSEARCH): Correctly find opcodes directory.
1656 Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1658 * simops.c (trace_output): Properly align accumulator output.
1659 (OP_3{0,2,4}00): Properly parenthesize test expression. Add error
1660 if shift count is too high.
1661 (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
1662 (OP_4E09): Make cpfg properly trace the input flags.
1663 (op_types): Add OP_FLAG_OUTPUT.
1664 (trace_{input,output}): Support OP_FLAG_OUTPUT.
1665 (OP_31000000): This ld2w varient is a 16-bit memory reference, not
1666 an 8-bit memory reference instruction for tracing purposes.
1667 (OP_201): Addi needs to set the carry.
1669 Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1671 * simops.c (OP_2600, OP_2601): Changed min and max comparisons
1672 to use signed register values.
1674 Wed Sep 4 11:35:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1676 * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
1678 (_ins_type): New enumeration to specify which container an
1679 instruction is in, and whether it is part of a parallel operation.
1680 (_state): Add ins_type field.
1681 ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
1682 (ins_type_counters): Counters for the various instruction types.
1683 ({left,right}_nops): Counters for the number of nops in each
1685 (d10v_debug): New variable to indicate whether debugging is turned
1688 * simops.c: (all functions): Change all #ifdef DEBUG code so that
1689 the input and output values can be traced, along with the
1690 instruction type. Make the -t option enable tracing.
1691 (all functions): Change printf calls to use the printf_filtered
1692 function in the callback table.
1694 * interp.c (_leftright): New enumeration to say whether 2 short
1695 instructions are done left first or right first.
1696 (do_{long,2_short,parallel}): Indicate in the machine state which
1697 type of instruction this is. Count each of the types of
1698 instructions executed.
1699 (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
1701 (sim_resume): Pass left/right indication to do_2_short.
1702 (all functions): Change printf calls to use the printf_filtered
1703 function in the callback table.
1704 (sim_trace): Turn on debug flag if DEBUG was defined, and call
1706 (sim_info): Print out statistics on instructions.
1707 (sim_{trace,create_inferior}): Eliminate extraneous output unless
1709 (sim_open): If args == -t and DEBUG was defined, set d10v_debug.
1710 Only initialize the hash table the first time sim_open is called.
1712 * Makefile.in: Make objects depend on d10v_sim.h.
1713 ({,SIM_}CFLAGS): Include configure dependent switches. Setting
1714 CFLAGS does not override host/target defines or SIM_CFLAGS.
1715 (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
1716 (run): By default, the math library is not needed to be linked
1718 ({BFD,LIBIBERTY}_LIB): Define as variables so they can be
1720 (VPATH): Don't set to anything but @srcdir@ to work with non-GNU
1722 ({run,callback}.o): Provide explicit paths to their appropriate
1724 (gencode{,.o},d10v-opc.o): Split compilation into creating object
1725 and linking. Instead of linking in libopcodes.a, just compile
1726 d10v-opc.o directly to handle canadian cross.
1727 (CSEARCH): Add opcodes directory.
1729 * configure.in (--enable-sim-cflags): New switch to allow user to
1731 (CC_FOR_BUILD): Deal with canadian crosses.
1732 * configure: Regenerate.
1734 Wed Sep 04 04:45:34 1996 Mark Alexander <marka@cygnus.com>
1736 * simops.c: Include correct syscall.h for d10v, not host's.
1737 Fix #ifdef SYS_stat.
1739 Tue Sep 3 14:00:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1741 * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
1742 Add trap 2 to be printf and trap 3 to be putchar.
1744 Wed Aug 28 21:42:34 1996 Mark Alexander <marka@cygnus.com>
1746 * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
1747 for low-level system calls.
1749 Wed Aug 28 17:33:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1751 * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
1753 Mon Aug 26 18:30:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1755 * d10v_sim.h (SEXT32): Added.
1756 * interp.c: Commented out printfs.
1757 * simops.c: Fixed error in sb and st2w.
1759 Thu Aug 15 13:30:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1761 * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
1762 DSP instructions. Added modulo addressing.
1764 Sun Aug 11 12:57:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1766 * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
1768 Fri Aug 2 17:44:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1770 * d10v_sim.h, simops.c: Snapshot.
1772 Thu Aug 1 17:05:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1774 * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
1775 gencode.c, interp.c, simops.c: Created.