sim/d10v/ChangeLog

   1 Wed Apr  2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
   2
   3         * configure: Regenerated to track ../common/aclocal.m4 changes.
   4
   5 Mon Mar 17 15:10:07 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
   6
   7         * configure: Re-generate.
   8
   9 Fri Mar 14 10:34:11 1997  Michael Meissner  <meissner@cygnus.com>
  10
  11         * configure: Regenerate to track ../common/aclocal.m4 changes.
  12
  13         * simops.c (OP_5F00): Remove old traps 1-3.  Make trap 15 the same
  14         as trap 0, which will be deprecated.  Only set errno, if an error
  15         in fact was returned.
  16
  17 Thu Mar 13 12:41:20 1997  Doug Evans  <dje@canuck.cygnus.com>
  18
  19         * interp.c: Delete redundant prototypes of sim_foo fns.
  20         (sim_open): New SIM_DESC result.  Argument is now in argv form.
  21         (other sim_*): New SIM_DESC argument.
  22
  23 Thu Mar 13 10:29:04 1997  Michael Meissner  <meissner@cygnus.com>
  24
  25         * simops.c (trace_{input,output}_func): Call flush_stdout from the
  26         callback functions.
  27         (OP_5F00): Ditto.
  28         (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
  29         (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
  30         setting the carry bit after an add or a subtract.
  31
  32 Wed Feb 12 16:04:15 1997  Michael Meissner  <meissner@cygnus.com>
  33
  34         * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
  35         40 bits of accumulators.  Sign/zero extend as appropriate.
  36
  37 Tue Feb  4 13:33:30 1997  Doug Evans  <dje@canuck.cygnus.com>
  38
  39         * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
  40         COMMON_{PRE,POST}_CONFIG_FRAG instead.
  41         * configure.in: sinclude ../common/aclocal.m4.
  42         * configure: Regenerated.
  43
  44 Thu Jan 23 11:46:23 1997  Stu Grossman  (grossman@critters.cygnus.com)
  45
  46         * configure configure.in Makefile.in:  Update to new configure
  47         scheme which is more compatible with WinGDB builds.
  48         * configure.in:  Improve comment on how to run autoconf.
  49         * configure:  Re-run autoconf to get new ../common/aclocal.m4.
  50         * Makefile.in:  Use autoconf substitution to install common
  51         makefile fragment.
  52
  53 Fri Dec 27 22:54:05 1996  Angela Marie Thomas (angela@cygnus.com)
  54
  55         * gencode.c: patch to not #include "d10v_sim.h" which
  56         unecessarily includes bfd.h and causes wingdb configure
  57         to fail.
  58
  59 Mon Dec 16 13:39:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
  60
  61         * interp.c (xfer_mem): Change unified memory to 0x0.
  62
  63 Thu Nov 28 20:42:56 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
  64
  65         * simops.c (OP_3E01): Fix tracing information.
  66         (OP_300{0,1}): Do not propigate sign.
  67
  68 Mon Nov 25 19:47:40 1996  Doug Evans  <dje@canuck.cygnus.com>
  69
  70         * config.in (WORDS_BIGENDIAN): Add.
  71         * configure: Regenerated.
  72         * d10v_sim.h: #include "config.h"
  73
  74 Sat Nov 23 09:34:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
  75
  76         * gencode.c (write_opcodes): Eliminate warnings when generated
  77         table.c is compiled.
  78
  79 Wed Nov 20 19:41:40 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
  80
  81         * interp.c (sim_open): Cast result of calloc, and make sure NULL
  82         was not returned.
  83         (dmem_addr): If address is illegal or in I/O space, signal a bus
  84         error.
  85         (pc_addr): Signal bus error, not illegal instruction for bogus
  86         pc.
  87
  88 Wed Nov 20 01:23:03 1996  Doug Evans  <dje@canuck.cygnus.com>
  89
  90         * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
  91         (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
  92         * configure.in: Simplify using macros in ../common/aclocal.m4.
  93         Call AC_CHECK_HEADERS(unistd.h).
  94         * configure: Regenerated.
  95         * config.in: New file.
  96         * interp.c: #include "callback.h".
  97         * simops.c: #include "config.h".  #include <unistd.h> if present.
  98
  99 Fri Nov  8 16:19:55 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 100
 101         * d10v-sim.h (simops): Add flag is_long.
 102         (State): Add pc_changed.  Instructions which update the PC should
 103         use the JMP macro which sets this.
 104         (JMP): New macro.  Sets the PC and the pc_changed flag.
 105
 106         * gencode.c (write_opcodes): Add is_long field.
 107
 108         * interp.c (lookup_hash): If we blindly apply a short opcode's mask
 109         to a long opcode we could get a false match.  Check the opcode size.
 110         (hash): Add a size field to the hash table.
 111         (sim_open): Initialize size field in hash table.
 112         (sim_resume): Change to logic for setting the PC.  Used to increment the
 113         PC if it had not been changed.  This didn't allow single-instruction loops.
 114         Now checks the flag State.pc_changed.  Also now stops when ^C is received.
 115         (dmem_addr): Fix translation of data segments to unified memory.
 116         (sim_ctrl_c): New function.  When ^C is received, set stop_simulator flag.
 117
 118         * simops.c: Changed all branch and jump instructions to use new JMP macro.
 119         (OP_20000000): Corrected trace information to show this is a ldi.l, not
 120         a ldi.s instruction.
 121
 122 Thu Oct 31 19:13:55 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 123
 124         * interp.c (sim_fetch_register, sim_store_register): Fix bug where
 125         updating the accumulators was overwriting other parts of the global
 126         State variable.
 127
 128 Wed Oct 30 17:35:14 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 129
 130         * interp.c (bfd.h) Don't include it here any more.
 131         (text{,_start,_end}): Move here from simops.c and make extern.
 132         (decode_pc): New function to return the PC as an address that the
 133         debugger can use.
 134         (dmem_addr): Print decoded PC in error message.
 135         (pc_addr): Ditto.
 136
 137         * simops.c (bfd.h) Don't include it here any more.
 138         (text{,_start,_end}): Move to simops.c.
 139         (trace_input_func): Move decoding of PC, and looking up .text
 140         start to decode_pc.
 141
 142         * d10v_sim.h (bfd.h): Include it here.
 143         (text{,_start,_end}): Add external declarations.
 144         (exec_bfd): Ditto.
 145         (decode_pc): Ditto.
 146
 147 Tue Oct 29 12:13:52 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 148
 149         * interp.c (sim_size): Now allocates unified memory for imap segments
 150         0,1,2, and 127. Initializes imap0 and imap1 to 0x1000.  Initializes dmap to 0.
 151         (sim_write): Just call xfer_mem().
 152         (sim_read): Just call xfer_mem().
 153         (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
 154         (dmem_addr): New function. Reads dmap register and translates data
 155         addresses to local addresses.
 156         (pc_addr): New function. Reads imap register and computes local address
 157         corresponding to contents of the PC.
 158         (sim_resume): Change to use pc_addr().
 159         (sim_create_inferior): Change reinitialization code. Also reinitializes
 160         imap[01] and dmap.
 161         (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
 162         (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
 163
 164         * simops.c (MEMPTR): Redefine to use dmem_addr().
 165         (OP_5F00): Replace references to STate.imem with dmem_addr().
 166
 167         * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
 168         (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
 169         (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
 170
 171 Tue Oct 22 15:22:33 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 172
 173         * d10v_sim.h (_ins_type): Reorganize, so that we can provide
 174         better statistics, like not counting NOPS as parallel
 175         instructions, and printing total cycles.
 176         (ins_type_counters): Make unsigned long.
 177         (left_nops,right_nops): Fold into ins_type_counters.
 178
 179         * simops.c (trace_input_func): Print new instruction types.
 180         Handle OP_R2R3 as input types.
 181         (OP_{38000000,7000}): Correctly sign extend bytes.
 182         (OP_5E00): Don't count NOPs as parallel instructions.
 183         (OP_460B): Remove unused variable.
 184         (OP_5F00): Ditto.
 185
 186         * interp.c (ins_type_counters): Make unsigned long.
 187         (left_nops,right_nops): Delete.
 188         (most functions): Add prototypes.
 189         (INLINE): If GCC and optimize define as __inline__.
 190         ({,lookup_}hash,get_operands): Declare as INLINE.
 191         (do_parallel): Count conditional operations.
 192         (add_commas): New function, to add commas every 3 digits.
 193         (sim_size): Call add_commas to print numbers.
 194         (sim_{open,resume}): Delete unused variables.
 195         (sim_info): Provide better statistics.
 196         (sim_read): Add int return type.
 197
 198 Mon Oct 21 16:16:26 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 199
 200         * interp.c (sim_resume): Change the way single-stepping and exceptions
 201         are handled so single-stepping works again.
 202
 203 Thu Oct 17 12:24:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 204
 205         * endian.c: Optimize simulated loads/stores on x86, AIX, and big
 206         endian hosts.
 207
 208         * configure.in (--enable-sim-bswap): New switch to enable using
 209         the BSWAP instruction on x86's.
 210         * configure: Regenerate.
 211
 212         * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
 213         support.
 214
 215 Wed Oct 16 13:50:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 216
 217         * endian.c: New file.  Move endian functions here from interp.c.
 218         Optimize code, and make it work as either inline functions or as a
 219         separate file.
 220
 221         * interp.c: Move endian functions from here to endian.c.
 222
 223         * Makefile.in (INCLUDE): Add endian.c.
 224         (run,libsim.a): Add dependency on endian.o.
 225         (endian.o): Add dependency.
 226
 227         * d10v_sim.h (read/write support): Always go through the machine
 228         independent endian functions.  If compiling with GCC and
 229         optimizing, include endian.c so the endian functions are inlined.
 230
 231         * simops.c (OP_5F00): Correct tracing of accumulators.
 232
 233 Tue Oct 15 10:57:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 234
 235         * simops.c (OP_5F00): Add support for getpid, kill system calls.
 236
 237         * interp.c (do_{2_short,parallel}): If an exception is raised,
 238         don't execute the second instruction.
 239
 240 Sat Oct 12 22:17:43 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 241
 242         * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
 243         temporary in case the register is overriden when loading.
 244         (OP_6200): Output type is OP_DREG for tracing.
 245
 246 Fri Oct  4 23:46:18 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 247
 248         * d10v_sim.h (struct _state): Add mem_{min,max} fields.
 249
 250         * interp.c (sim_size): Initialize mem_{min,max} fields.
 251         (sim_write): Update mem_{min,max} fields.
 252         (sim_resume): If PC is not in the minimum/maximum memory range,
 253         abort.
 254         (sim_create_inferior): Preserve mem_{min,max} fields.
 255
 256 Fri Sep 27 13:11:58 1996  Mark Alexander  <marka@cygnus.com>
 257
 258         * simops.c (OP_5F00): Add support for time() system call.
 259
 260 Wed Sep 25 16:31:41 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 261
 262         * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
 263         stored if tracing.
 264         (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
 265         system calls.
 266
 267 Mon Sep 23 17:55:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 268
 269         * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
 270         (trace_input_func): Add support for  OP_{CONSTANT8,R2,R3}.
 271         (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
 272         to call/subroutine returns to trace the first two arguments and
 273         the return value.  For small jumps, use CONSTANT8, not CONSTANT16.
 274
 275 Fri Sep 20 15:36:45 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 276
 277         * interp.c (sim_create_inferior): Reinitialize State every time
 278         sim_create_inferior() is called.
 279
 280 Thu Sep 19 21:38:20 1996  Michael Meissner  <meissner@wogglebug.ziplink.net>
 281
 282         * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
 283         on comparisons.
 284         (OP_401): Fix tracing information.
 285
 286 Thu Sep 19 10:30:22 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 287
 288         * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
 289         (trace_input_func): Use them.
 290         (trace_input_func): Make sure there is a trailing space after the
 291         instruction.
 292         (OP_6200): Fix tracing info.
 293
 294         * Makefile.in (run): Add dependencies on libbfd.a and
 295         libiberity.a.
 296
 297 Wed Sep 18 09:13:25 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 298
 299         * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
 300         numbers and function names in debug trace.
 301         (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
 302         DEBUG_LINE_NUMBER.
 303         (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
 304         and exit system call trap being executed.
 305
 306         * interp.c (sim_stop_reason): Set exit code correctly for stop
 307         instruction and exit system call trap.
 308
 309         * configure.in (--enable-sim-cflags): Remove trace case.
 310         (--enable-sim-debug): New switch to set the debug values.
 311         * configure: Regenerate.
 312
 313         * simops.c (trace_{input,output}_func): Rename from
 314         trace_{input,output}.
 315         (trace_{input,output}): Call trace_{input,output}_func if
 316         d10v_debug is non-zero.
 317         (SIZE_INSTRUCTION): Cut down to 8.
 318         (SIZE_OPERANDS): Cut down to 18.
 319         (SIZE_LOCATION): New value for size of line number, function name
 320         field.
 321         (init_text_p,text{,_start,_end}): New static variables for
 322         printing line number and function name.
 323         (exec_bfd): New external that run.c sets.
 324         (trace_input_func): Print line number and function name if
 325         available and if desired.
 326         (OP_4E09): Don't print out DBT message.
 327         (OP_5FE0): Set exception field to SIG_D10V_STOP.
 328         (OP_5F00): Set exception field to SIG_D10V_EXIT.
 329
 330 Sat Sep 14 22:18:43 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 331
 332         * interp.c (do_2_short): If the instruction encodes jump->ins,
 333         don't do the second instruction if the jump succeeds.
 334
 335 Fri Sep 13 22:35:19 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 336
 337         * simops.c (OP_5F00): Use unknown traps to print all GPRs,
 338         accumulators, PC, and F0/F1/C flags.
 339
 340 Thu Sep 12 12:50:11 1996  Mark Alexander  <marka@cygnus.com>
 341
 342         * simops.c (OP_5F00): Fix problems with system calls.
 343
 344 Thu Sep 12 12:19:28 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 345
 346         * simops.c (OP_5F00): Correct tracing information for trap.
 347
 348 Wed Sep 11 18:55:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 349
 350         * Makefile.in (CSEARCH): Correctly find opcodes directory.
 351
 352 Mon Sep  9 13:27:26 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 353
 354         * simops.c (trace_output): Properly align accumulator output.
 355         (OP_3{0,2,4}00): Properly parenthesize test expression.  Add error
 356         if shift count is too high.
 357         (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
 358         (OP_4E09): Make cpfg properly trace the input flags.
 359         (op_types): Add OP_FLAG_OUTPUT.
 360         (trace_{input,output}): Support OP_FLAG_OUTPUT.
 361         (OP_31000000): This ld2w varient is a 16-bit memory reference, not
 362         an 8-bit memory reference instruction for tracing purposes.
 363         (OP_201): Addi needs to set the carry.
 364
 365 Fri Sep  6 17:56:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 366
 367         * simops.c (OP_2600, OP_2601): Changed min and max comparisons
 368         to use signed register values.
 369
 370 Wed Sep  4 11:35:17 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 371
 372         * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
 373         output.
 374         (_ins_type): New enumeration to specify which container an
 375         instruction is in, and whether it is part of a parallel operation.
 376         (_state): Add ins_type field.
 377         ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
 378         (ins_type_counters): Counters for the various instruction types.
 379         ({left,right}_nops): Counters for the number of nops in each
 380         container.
 381         (d10v_debug): New variable to indicate whether debugging is turned
 382         on.
 383
 384         * simops.c: (all functions): Change all #ifdef DEBUG code so that
 385         the input and output values can be traced, along with the
 386         instruction type.  Make the -t option enable tracing.
 387         (all functions): Change printf calls to use the printf_filtered
 388         function in the callback table.
 389
 390         * interp.c (_leftright): New enumeration to say whether 2 short
 391         instructions are done left first or right first.
 392         (do_{long,2_short,parallel}): Indicate in the machine state which
 393         type of instruction this is.  Count each of the types of
 394         instructions executed.
 395         (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
 396         flag is set.
 397         (sim_resume): Pass left/right indication to do_2_short.
 398         (all functions): Change printf calls to use the printf_filtered
 399         function in the callback table.
 400         (sim_trace): Turn on debug flag if DEBUG was defined, and call
 401         sim_resume.
 402         (sim_info): Print out statistics on instructions.
 403         (sim_{trace,create_inferior}): Eliminate extraneous output unless
 404         debugging.
 405         (sim_open): If args == -t and DEBUG was defined, set d10v_debug.
 406         Only initialize the hash table the first time sim_open is called.
 407
 408         * Makefile.in: Make objects depend on d10v_sim.h.
 409         ({,SIM_}CFLAGS): Include configure dependent switches.  Setting
 410         CFLAGS does not override host/target defines or SIM_CFLAGS.
 411         (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
 412         (run): By default, the math library is not needed to be linked
 413         in.
 414         ({BFD,LIBIBERTY}_LIB): Define as variables so they can be
 415         overridden.
 416         (VPATH): Don't set to anything but @srcdir@ to work with non-GNU
 417         makes.
 418         ({run,callback}.o): Provide explicit paths to their appropriate
 419         source directories.
 420         (gencode{,.o},d10v-opc.o): Split compilation into creating object
 421         and linking.  Instead of linking in libopcodes.a, just compile
 422         d10v-opc.o directly to handle canadian cross.
 423         (CSEARCH): Add opcodes directory.
 424
 425         * configure.in (--enable-sim-cflags): New switch to allow user to
 426         set the defaults.
 427         (CC_FOR_BUILD): Deal with canadian crosses.
 428         * configure: Regenerate.
 429
 430 Wed Sep 04 04:45:34 1996  Mark Alexander  <marka@cygnus.com>
 431
 432         * simops.c: Include correct syscall.h for d10v, not host's.
 433         Fix #ifdef SYS_stat.
 434
 435 Tue Sep  3 14:00:04 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 436
 437         * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
 438         Add trap 2 to be printf and trap 3 to be putchar.
 439
 440 Wed Aug 28 21:42:34 1996  Mark Alexander  <marka@cygnus.com>
 441
 442         * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
 443         for low-level system calls.
 444
 445 Wed Aug 28 17:33:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 446
 447         * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
 448
 449 Mon Aug 26 18:30:28 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 450
 451         * d10v_sim.h (SEXT32): Added.
 452         * interp.c: Commented out printfs.
 453         * simops.c:  Fixed error in sb and st2w.
 454
 455 Thu Aug 15 13:30:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 456
 457         * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
 458         DSP instructions.  Added modulo addressing.
 459
 460 Sun Aug 11 12:57:15 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 461
 462         * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
 463
 464 Fri Aug  2 17:44:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 465
 466         * d10v_sim.h, simops.c: Snapshot.
 467
 468 Thu Aug  1 17:05:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 469
 470         * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
 471         gencode.c, interp.c, simops.c: Created.
 472