1 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
3 * configure: Regenerate.
5 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
7 * configure: Regenerate to track ../common/common.m4 changes.
10 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
11 Daniel Jacobowitz <dan@codesourcery.com>
12 Joseph Myers <joseph@codesourcery.com>
14 * configure: Regenerate.
16 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
19 * config.in: Regenerate.
21 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
23 * configure: Regenerated.
25 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
27 * configure: Regenerated.
29 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
31 * configure: Regenerated.
33 2006-04-18 Nick Clifton <nickc@redhat.com>
35 * interp.c (sim_stop_reason): Fix typo.
37 2005-11-28 Mark Mitchell <mark@codesourcery.com>
39 * interp.c (gdb/signals.h): Include it.
40 (sim_stop_reason): Use TARGET_SIGNAL_*.
42 2005-03-23 Mark Kettenis <kettenis@gnu.org>
44 * configure: Regenerate.
46 2005-01-14 Andrew Cagney <cagney@gnu.org>
48 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
49 explicit call to AC_CONFIG_HEADER.
50 * configure: Regenerate.
52 2005-01-12 Andrew Cagney <cagney@gnu.org>
54 * configure.ac: Update to use ../common/common.m4.
55 * configure: Re-generate.
57 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
59 * configure: Regenerated to track ../common/aclocal.m4 changes.
61 2005-01-07 Andrew Cagney <cagney@gnu.org>
63 * configure.ac: Rename configure.in, require autoconf 2.59.
64 * configure: Re-generate.
66 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
68 * configure: Regenerate for ../common/aclocal.m4 update.
70 2004-06-28 Andrew Cagney <cagney@gnu.org>
72 * interp.c (sim_resume): Rename ui_loop_hook to
73 deprecated_ui_loop_hook.
75 2003-10-30 Andrew Cagney <cagney@redhat.com>
77 * simops.c: Replace "struct symbol_cache_entry" with "struct
80 2003-06-22 Andrew Cagney <cagney@redhat.com>
82 * interp.c (xfer_mem): Simplify. Only do a single partial
83 transfer. Problem reported by Tom Rix.
85 2003-05-07 Andrew Cagney <cagney@redhat.com>
87 * interp.c (sim_d10v_translate_addr): Add "regcache" parameter.
88 (sim_d10v_translate_imap_addr): Ditto.
89 (sim_d10v_translate_dmap_addr): Ditto.
90 (xfer_mem): Pass NULL regcache to sim_d10v_translate_addr.
91 (dmem_addr): Pass NULL regcache to sim_d10v_translate_dmap_addr.
92 (dmap_register, imap_register): Add "regcache" parameter.
93 (imem_addr): Pass NULL regcache to sim_d10v_translate_imap_addr.
94 (sim_fetch_register): Pass NULL regcache to imap_register and
97 2003-02-27 Andrew Cagney <cagney@redhat.com>
99 * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
101 2002-11-13 Andrew Cagney <cagney@redhat.com>
103 * simops.c: Include <string.h>.
105 2002-06-17 Andrew Cagney <cagney@redhat.com>
107 * d10v_sim.h (SET_PSW_BIT): Add cast to avoid inverting an enum.
109 2002-06-16 Andrew Cagney <ac131313@redhat.com>
111 * configure: Regenerated to track ../common/aclocal.m4 changes.
113 2002-06-13 Tom Rix <trix@redhat.com>
115 * interp.c (xfer_mem): Fix transfers across multiple segments.
117 2002-06-09 Andrew Cagney <cagney@redhat.com>
119 * Makefile.in (INCLUDE): Update path to callback.h.
120 * gencode.c: Do not include "callback.h".
121 * d10v_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
124 2002-06-08 Andrew Cagney <cagney@redhat.com>
126 * interp.c (sim_fetch_register): Fix name of enum used in cast.
127 (sim_store_register): Ditto.
129 2002-06-02 Elena Zannoni <ezannoni@redhat.com>
131 From Jason Eckhardt <jle@redhat.com>
132 * d10v_sim.h (INC_ADDR): Correctly handle the case where MOD_E is
133 less than MOD_S (post-decrement).
135 2002-06-01 Andrew Cagney <ac131313@redhat.com>
137 * interp.c (sim_fetch_register, sim_store_register): Use a switch
138 statement and enums from "sim-d10v.h".
140 2002-05-28 Elena Zannoni <ezannoni@redhat.com>
142 * interp.c (sim_create_inferior): Add comment.
144 From Alan Matsuoka <alanm@redhat.com>:
145 From 2001-04-27 Jason Eckhardt <jle@cygnus.com>:
146 * simops.c (OP_4400): Output "mvf0f" instead of "mf0f".
147 (OP_4401): Output "mvf0t" instead of "mf0t".
148 (OP_460B): Do not output a flag register.
149 (OP_4609): Do not output a flag register.
151 2002-05-23 Andrew Cagney <ac131313@redhat.com>
153 * Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
154 * interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
156 2001-08-01 John R. Moore <jmoore@redhat.com>
158 * interp.c (sim_create_inferior): Removed a hack that stated
159 it was setting r0/r1 with argc/argv.
161 2001-04-15 J.T. Conklin <jtc@redback.com>
163 * Makefile.in (simops.o): Add simops.h to dependency list.
165 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
167 * configure: Regenerated to track ../common/aclocal.m4 changes.
169 Tue Apr 18 16:26:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
171 * interp.c (sim_resume): Deliver SIGILL.
172 (lookup_hash): Do not print SIGILL message.
174 Tue Feb 22 18:24:56 2000 Andrew Cagney <cagney@b1.cygnus.com>
176 * Makefile.in (SIM_EXTRA_CFLAGS): Define SIM_HAVE_ENVIRONMENT.
177 * interp.c (sim_set_trace): Replace sim_trace. Enable tracing.
179 Tue Feb 8 17:41:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
181 * d10v_sim.h (SIG_D10V_BUS): Define.
183 * simops.c (address_exception): Delete function.
184 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
185 OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
186 OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
187 OP_6E1F, OP_6A01, OP_6E01, OP_37010000): Replace call to
188 address_exception with code that sets SIG_D10V_BUS.
190 * interp.c (sim_resume): When SIGBUS or SIGSEGV, deliver a bus
191 error to the simulator before resuming execution.
192 (sim_trace): Check stop reason and use that to determine sim_trace
194 (sim_stop_reason): For SIG_D10V_BUS return a SIGBUS / SIGSEGV
197 Tue Jan 18 16:07:42 MST 2000 Diego Novillo <dnovillo@cygnus.com>
199 * interp.c (sim_create_inferior): Change internal initial value for
202 Mon Jan 3 02:06:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
204 * interp.c (lookup_hash): Stop the update of the PC when there was
205 an illegal instruction exception.
207 Mon Jan 3 00:14:33 2000 Andrew Cagney <cagney@b1.cygnus.com>
209 * simops.c (address_exception): New function.
210 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
211 OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
212 OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
213 OP_6E1F, OP_6A01, OP_6E01, OP_37010000): For "ld", "ld2w", "st"
214 and "st2w" check that the address is aligned.
216 1999-12-30 Chandra Chavva <cchavva@cygnus.com>
218 * d10v_sim.h (INC_ADDR): Added code to assign
219 proper address for loads with predec operations.
221 1999-11-25 Nick Clifton <nickc@cygnus.com>
223 * simops.c (OP_4E0F): New function: Simulate new bit pattern for
226 Fri Oct 29 18:34:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
228 * simops.c (move_to_cr): Don't allow user to set PSW.DM in either
231 Thu Oct 28 01:26:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
233 * simops.c (OP_5F20): Use SET_HW_PSW when updating PSW.
234 (PSW_HW_MASK): Declare.
236 * d10v_sim.h (move_to_cr): Add ``psw_hw_p'' parameter.
237 (SET_CREG, SET_PSW_BIT): Update.
238 (SET_HW_CREG, SET_HW_PSW): Define.
240 Sun Oct 24 21:38:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
242 * interp.c (sim_d10v_translate_dmap_addr): Fix extraction of IOSP
245 Sun Oct 24 16:04:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
247 * interp.c (sim_d10v_translate_addr): New function.
248 (xfer_mem): Rewrite. Use sim_d10v_translate_addr.
249 (map_memory): Make INLINE.
251 Sun Oct 24 13:45:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
253 * interp.c (sim_d10v_translate_dmap_addr): New function.
254 (dmem_addr): Rewrite. Use sim_d10v_translate_dmap_addr. Change
255 offset parameter to type uint16.
256 * d10v_sim.h (dmem_addr): Update declaration.
258 Sun Oct 24 13:07:31 1999 Andrew Cagney <cagney@b1.cygnus.com>
260 * interp.c (imap_register, set_imap_register, dmap_register,
261 set_imap_register): Use map_memory.
263 (sim_create_inferior): Initialize all DMAP registers. NOTE that
264 DMAP2, in internal memory mode, is set to 0x0000 and NOT
265 0x2000. This is consistent with the older d10v boards.
267 Sun Oct 24 11:22:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
269 * interp.c (sim_d10v_translate_imap_addr): New function.
270 (imem_addr): Rewrite. Use sim_d10v_translate_imap_addr.
271 (last_from, last_to): Declare.
273 Sun Oct 24 01:21:56 1999 Andrew Cagney <cagney@b1.cygnus.com>
275 * d10v_sim.h (struct d10v_memory): Define. Support very long
277 (struct _state): Replace imem, dmem and umem by mem.
278 (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, IMEM_SEGMENTS,
279 DMEM_SEGMENTS, UMEM_SEGMENTS): Define.
281 * interp.c (map_memory): New function.
282 (sim_size, xfer_memory, imem_addr, dmem_addr): Update.
283 (UMEM_SEGMENTS): Moveed to "d10v_sim.h".
284 (IMEM_SIZEDMEM_SIZE): Delete.
286 Sat Oct 23 20:06:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
288 * interp.c: Include "sim-d10v.h".
289 (imap_register, set_imap_register, dmap_register,
290 set_dmap_register, spi_register, spu_register, set_spi_register,
291 set_spu_register): New functions.
292 (sim_create_inferior): Update.
293 (sim_fetch_register, sim_store_register): Rewrite. Use enums
294 defined in sim-d10v.h.
296 * d10v_sim.h (DEBUG_MEMORY): Define.
297 (IMAP0, IMAP1, DMAP, SET_IMAP0, SET_IMAP1, SET_DMAP): Delete.
299 Sat Oct 23 18:41:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
301 * interp.c (sim_open): Allow a debug value to be passed to the -t
303 (lookup_hash): Don't exit on an illegal instruction.
304 (do_long, do_2_short, do_parallel): Check for failed instruction
307 Mon Oct 18 18:03:24 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
309 * simops.c (OP_3220): Fix trace output for illegal accumulator
312 1999-09-14 Nick Clifton <nickc@cygnus.com>
314 * simops.c: Disable setting of DM bit in PSW.
316 Wed Sep 8 19:34:55 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
318 * simops.c (op_types): Added new memory indirect type OP_MEMREF3.
319 (trace_input_func): Added support for OP_MEMREF3.
320 (OP_32010000): New instruction ld.
321 (OP_33010000): New instruction ld2w.
322 (OP_5209): New instruction sac.
323 (OP_4209): New instruction sachi.
324 (OP_3220): New instruction slae.
325 (OP_36010000): New instruction st.
326 (OP_37010000): New instruction st2w.
328 1999-09-09 Stan Shebs <shebs@andros.cygnus.com>
330 * interp.c (old_segment_mapping): New global.
331 (xfer_mem): Change the default segment mapping to be the way
332 that Mitsubishi prefers, but use the previous mapping if
333 old_segment_mapping is true.
334 (sim_open): Add an option -oldseg to get the old mapping.
335 (sim_create_inferior): Init mapping registers based on the
336 value of old_segment_mapping.
338 1999-09-07 Nick Clifton <nickc@cygnus.com>
340 * simops.c (OP_6601): Do not write back decremented address if
341 either of the destination registers was the same as the address
343 (OP_6201): Do not write back incremented address if either of the
344 destination registers was the same as the address register.
346 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
348 * configure: Regenerated to track ../common/aclocal.m4 changes.
350 1999-05-08 Felix Lee <flee@cygnus.com>
352 * configure: Regenerated to track ../common/aclocal.m4 changes.
354 1999-04-02 Keith Seitz <keiths@cygnus.com>
356 * interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK
358 (sim_resume): If the counter has expired, call the ui_loop_hook,
360 (UI_LOOP_POLL_INTERVAL): Define. Used to tweak the frequency of
362 * Makefile.in (SIM_EXTRA_CFLAGS): Include NEED_UI_LOOP_HOOK.
364 Wed Mar 10 19:32:13 1999 Nick Clifton <nickc@cygnus.com>
366 * simops.c: If load instruction with auto increment/decrement
367 addressing is used when the destination register is the same as
368 the address register, then ignore the auto increment/decrement.
370 Wed Mar 10 19:32:13 1999 Martin M. Hunt <hunt@cygnus.com>
372 * simops.c (OP_5F00): Ifdef SYS_stat case because
373 not all systems have it defined.
375 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
377 * simops.c (OP_5607): Correct saturation comparison/assignment.
378 (OP_1201, OP_1203, OP_17001200, OP_17001202,
379 OP_2A00, OP_2800, OP_2C00, OP_3200, OP_3201,
380 OP_1001, OP_1003, OP_17001000, OP_17001002): Ditto.
382 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
384 * simops.c (OP_5605): Sign extend MIN32 and MAX32 before saturation
390 1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com)
392 * simops.c (OP_1223): Sign extend MIN32 and MAX32 before saturation
395 Tue Nov 24 17:04:43 1998 Andrew Cagney <cagney@b1.cygnus.com>
397 * simops.c (sys/syscall.h): Include targ-vals.h instead.
398 (SYS_*): Replace with TARGET_SYS_*.
400 * Makefile.in: Add dependency on targ-vals.h.
401 (NL_TARGET): Define as NL_TARGET_d10v.
403 Wed Sep 30 00:06:32 1998 Andrew Cagney <cagney@amy.cygnus.com>
405 * interp.c (xfer_mem): Missing break, instruction memory case
406 flowed into unified memory case.
408 Wed Sep 30 10:14:18 1998 Nick Clifton <nickc@cygnus.com>
410 * simops.c: If load instruction with auto increment/decrement
411 addressing is used when the destination register is the same as
412 the address register, then ignore the auto increment/decrement.
414 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
416 * configure: Regenerated to track ../common/aclocal.m4 changes.
418 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
420 * configure: Regenerated to track ../common/aclocal.m4 changes.
423 Sun Apr 26 15:20:23 1998 Tom Tromey <tromey@cygnus.com>
425 * acconfig.h: New file.
426 * configure.in: Reverted change of Apr 24; use sinclude again.
428 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
430 * configure: Regenerated to track ../common/aclocal.m4 changes.
433 Fri Apr 24 11:20:06 1998 Tom Tromey <tromey@cygnus.com>
435 * configure.in: Don't call sinclude.
437 Fri Apr 24 11:04:46 1998 Andrew Cagney <cagney@chook.cygnus.com>
439 * interp.c (struct hash_entry): OPCODE and MASK are unsigned.
441 * d10v_sim.h (remote-sim.h, sim-config.h): Include.
443 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
445 * configure: Regenerated to track ../common/aclocal.m4 changes.
447 Wed Apr 1 12:59:17 1998 Andrew Cagney <cagney@b1.cygnus.com>
449 * simops.c (trace_input_func): Use move_from_cr / CREGS to obtain
451 (OP_OP_1000000, add3): Trace inputs before performing add.
452 (OP_5F00, <*>): Trace input registers before making system call.
453 (OP_5F00, <kill>): Trace R0, R1 not REGn.
454 (OP_5F00, <getpid>): Always return 47.
456 * d10v_sim.h (SLOT, SLOT_NR, SLOT_PEND_MASK, SLOT_PEND,
457 SLOT_DISCARD, SLOT_FLUSH): Define. An implementation of write
459 (struct _state): Add struct slot slot to global state variable.
460 (struct _state): Delete fields SM, EA, DB, DM, IE, RP, MD, FX, ST,
461 F0, F1, C from global State variable.
462 (struct _state): Add struct trace to global State variable.
463 (GPR, SET_GPR): Define. SET_GPR uses SLOT_PEND.
464 (PSW*, SET_PSW*): Define. SET_PSW* uses SET_CREG.
465 (CREG, SET_CREG, SET_*): Define. SET_CREG uses func move_to_cr.
466 (INC_ADDR): Re-implement. Use SET_GPR to update registers.
467 (JMP): Re-implement. Use SET_* to update registers.
469 * interp.c: Use new SET_* et.al. macros to fetch / store
471 (get_operands): Squirrel away trace values at start of each
473 (do_2_short): Flush pending writes before issuing second
475 (sim_resume): Flush pending writes at end of instruction cycle.
476 (sim_fetch_register, sim_store_register, sim_create_inferior):
477 After scheduling updates to registers using SET_*, flush updates.
478 (sim_resume): Re-order handling of RPT/repeat and IBA/hbreak so
479 that each sets pc using SET_* and last SET_* eventually winds out.
481 * simops.c: Use new SET_* et.al. macros to fetch / store
483 (move_to_cr): Add MASK argument for selective update of CREG bits.
484 Re-implement using new SET_* macros.
485 (trace_output_func, trace_output): Delete. Replace with.
486 (do_trace_output_flush, trace_output_finish, trace_output_40,
487 trace_output_32, trace_output_16, trace_output_void,
488 trace_output_flag): New functions. Handle specific trace cases.
489 (OP_*): Re-write tracing to use new trace_output_* functions.
490 (OP_*): Re-write to use new SET_* et.al. macros.
491 (FUNC, PARM[1-4], RETVAL, RETVAL32): Redo definition.
492 (RETVAL_HIGH, RETVAL_LOW): Delete, use RETVAL32.
494 Wed Apr 1 12:55:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
496 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
497 configure: Re-generate.
499 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
501 * configure: Regenerated to track ../common/aclocal.m4 changes.
503 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
505 * configure: Regenerated to track ../common/aclocal.m4 changes.
507 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
509 * configure: Regenerated to track ../common/aclocal.m4 changes.
511 Tue Feb 17 12:38:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
513 * interp.c (sim_store_register, sim_fetch_register): Pass in
514 length parameter. Return -1.
516 Mon Oct 27 14:43:33 1997 Fred Fish <fnf@cygnus.com>
518 * (dmem_addr): If address is illegal or in I/O space, signal a bus
519 error. Allocate unified memory on demand. Fix DMEM address
522 Mon Feb 16 10:27:53 1998 Andrew Cagney <cagney@b1.cygnus.com>
524 * simops.c (OP_5F20): Implement "dbt".
525 (OP_5F60): Implement "rtd".
527 * d10v_sim.h (DPC_CR): Define enum.
528 (DBT_VECTOR_START): Define
531 Fri Feb 13 15:15:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
533 * simops.c (move_to_cr): Sync regs[SP_IDX] with State.sp according
536 * d10v_sim.h (struct _state): Add sp, as holding area for SPI/SPU.
539 Wed Feb 11 16:53:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
541 * simops.c (OP_5F00): Call error instead of abort for unknown
544 * d10v_sim.h (enum): Define DPSW_CR.
546 * simops.c (move_to_cr): Mask out hardwired zero bits in DPSW.
548 Tue Feb 10 18:28:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
550 * interp.c (sim_write_phys): Delete.
551 (sim_load): Call sim_load_file with sim_write and LMA.
553 Mon Feb 9 12:05:01 1998 Andrew Cagney <cagney@b1.cygnus.com>
555 * interp.c: Rewrite xfer_mem so that it translates addresses as -
556 0x00... - DMAP translated memory, 0x01... IMAP translated memory,
557 0x10... - on-chip data, 0x11... - on-chip insn, 0x12... - unified
560 (imem_addr): New function - translate IMEM address.
561 (sim_resume): Use imem_addr to translate insn address, abort if
563 (sim_create_inferior): Write ARGV to memory using sim_write. Pass
564 argc/argv using r0/r1 not r2/r3.
565 (sim_size): Do not initialize IMAP/DMAP here.
566 (sim_open): Call sim_create_inferior and sim_size to initialize
568 (sim_create_inferior): Initialize IMAP/DMAP to hardware reset
570 (init_system): Delete.
571 (xfer_mem, sim_fetch_register, sim_store_register): Do not call
573 (decode_pc): Check prog_bfd is defined before looking up .text
576 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
578 * configure: Regenerated to track ../common/aclocal.m4 changes.
580 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
582 * configure: Regenerated to track ../common/aclocal.m4 changes.
584 Sun Jan 25 22:23:01 1998 Michael Meissner <meissner@cygnus.com>
586 * interp.c (sim_stop_reason): Exit status is now in r0, not r2.
588 Sat Jan 24 19:00:30 1998 Michael Meissner <meissner@cygnus.com>
590 * d10v_sim.h (DEBUG_TRAP): New debug flag.
592 * simops.c (OP_5F00): If DEBUG_TRAP is on, turn traps 0-14 into
593 printing the registers.
595 Thu Jan 22 17:54:01 1998 Michael Meissner <meissner@cygnus.com>
597 * simops.c (op_types): New ABI, args are r0..r3, system call # is
599 (trace_{in,out}put_func): Ditto.
601 (OP_24800000): Ditto.
605 Thu Jan 22 14:30:36 1998 Fred Fish <fnf@cygnus.com>
607 * interp.c (UMEM_SEGMENTS): New define, set to 128.
608 (sim_size): Use UMEM_SEGMENTS rather than hardwired constant.
609 (sim_close): Reset prog_bfd to NULL after closing it. Also
610 reset prog_bfd_was_opened_p after closing prog_bfd.
611 (sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd.
612 (sim_create_inferior): Get start address from abfd not prog_bfd.
613 (xfer_mem): Do bounds checking on addresses and return zero length
614 read/write on bad addresses, rather than aborting. Prepare to
615 be able to handle xfers that cross segment boundaries, but not
616 yet implemented. Only emit debug message when d10v_debug is
617 set as well as DEBUG being defined.
619 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
621 * configure: Regenerated to track ../common/aclocal.m4 changes.
623 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
625 * configure: Regenerated to track ../common/aclocal.m4 changes.
628 Tue Dec 9 10:28:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
630 * d10v_sim.h (RPT_S): Index cregs with RPT_S_CR not RPT_E_CR.
631 (BPSW): Ditto for BPSW_CR and not PSW_CR.
633 * simops.c (OP_5F40): JMP to BPC instead of assigning PC directly.
635 Mon Dec 8 12:58:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
637 * simops.c (OP_5F00): From Martin Hunt <hunt@cygnus.com>. Change
638 reserved trap from 0 to 15. Add trap emulation code for 0-14.
640 * interp.c (sim_resume): From Martin Hunt <hunt@cygnus.com>. Check
643 * d10v_sim.h (AE_VECTOR_START, RIE_VECTOR_START,
644 SDBT_VECTOR_START, TRAP_VECTOR_START): Define.
646 * simops.c (OP_5F00): For "trap", mask out all but SM bit in PSW,
648 (OP_5F00): For "trap", update BPSW with move_to_cr.
650 Fri Dec 5 15:31:17 1997 Andrew Cagney <cagney@b1.cygnus.com>
652 * d10v_sim.h (enum): Enumerate CR register names.
653 (enum): Enumerate PSW bit values.
654 (PSW): Obtain value uing move_from_cr.
655 (MOD_S, MOD_E, BPSW): Make r-values.
656 (move_from_cr, move_to_cr): Declare functions.
658 * interp.c (sim_fetch_register, sim_store_register): Use
659 move_from_cr and move_to_cr for CR register transfers.
661 * simops.c (move_from_cr, move_to_cr): New functions.
662 (OP_5F40): Move BPSW to PSW using move_to_cr and move_from_cr.
663 (OP_5600): For "mvtc", use function move_to_cr.
664 (OP_5200): For "mvfc", use function move_from_cr.
666 Fri Dec 5 13:33:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
668 * simops.c (OP_5600): For "mvtc" MOD_E and MOD_S, ensure that the
671 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
673 * configure: Regenerated to track ../common/aclocal.m4 changes.
675 Thu Dec 4 16:51:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
677 * d10v_sim.h (struct _state): Add DM - PSW debug mask.
679 * simops.c (OP_5600): For "mvtc", save PSW.DM.
680 (OP_5200): Ditto for "mvfc".
682 Wed Dec 3 17:27:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
684 * d10v_sim.h (SEXT56): Define.
686 * simops.c (OP_4201): For "rac", sign extend 56 bit value before
689 * d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using
692 Tue Dec 2 15:38:34 1997 Fred Fish <fnf@cygnus.com>
694 * interp.c (sim_resume): Call do_2_short with LEFT_FIRST or
695 RIGHT_FIRST, as appropriate, instead of hardcoded ints that
696 don't match enum values.
698 Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
700 * simops.c (OP_3A00): For "macu", perform multiply stage using 32
701 bit rather than 16 bit precision.
702 (OP_3C00): For "mulxu", store unsigned product in ACC.
703 (OP_3800): For "msbu", subtract unsigned product from ACC,
704 (OP_0): For "sub", compute carry by comparing inputs.
706 Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
708 * simops.c (OP_1000): For "sub2w", compute carry by comparing
711 Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
713 * simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract,
714 carry indicated by value > 0xffff.
716 Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
718 * interp.c (sim_resume): Don't set up SIGINT handler using signal,
720 (sim_resume): Fix race condition of a direct assignment to
721 stop_simulator, conditionally call sim_stop.
722 (sim_stop_reason): Check stop_simulator returning SIGINT. Clear
723 stop_simulator ready for next sim_resume call.
724 (sim_ctrl_c): Delete function.
726 Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
728 * interp.c (sim_resume): For "REP", only check/update the PC when
729 a branch instruction has not been executed.
731 Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com>
733 * simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign
734 extend bit 44 all constants.
735 (OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro.
737 Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
739 * d10v_sim.h: Include sim-types.h.
740 (uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef
741 using unsigned8 et.al. from sim-types.h.
742 (SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with
745 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
747 * interp.c (sim_write_phys): New function, write to physical
748 instead of virtual memory.
750 * interp.c (sim_load): Pass lma_p and sim_write_phys to
753 Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com>
755 * simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move
756 exception generation code to OP_6E01.
757 (OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception
760 Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com>
762 * simops.c (OP_6401): postdecrement on r15 is OK, remove exception.
765 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
767 * configure: Regenerated to track ../common/aclocal.m4 changes.
769 Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com>
771 * interp.c (pc_addr): Discard upper bit(s) of PC in case
772 IMAP1 selects unified memory.
773 * d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing
776 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
778 * configure: Regenerated to track ../common/aclocal.m4 changes.
780 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
782 * configure: Regenerated to track ../common/aclocal.m4 changes.
784 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
786 * configure: Regenerated to track ../common/aclocal.m4 changes.
788 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
790 * configure: Regenerated to track ../common/aclocal.m4 changes.
792 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
794 * configure: Regenerated to track ../common/aclocal.m4 changes.
796 Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com>
798 * interp.c (sim_resume): Increment PC at end of rep
801 * simops.c (OP_4201): Fix rachi instruction.
803 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
805 * configure: Regenerated to track ../common/aclocal.m4 changes.
807 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
809 * configure: Regenerated to track ../common/aclocal.m4 changes.
812 Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
814 * interp.c (sim_kill): Delete.
815 (sim_create_inferior): Add ABFD argument.
816 (sim_load): Move setting of PC from here.
817 (sim_create_inferior): To here.
818 (start_address): Delete variable.
820 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
822 * configure: Regenerated to track ../common/aclocal.m4 changes.
825 Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
827 * interp.c (sim_open): Add ABFD argument.
829 Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
831 * interp.c (sim_open): Add callback argument.
832 (sim_set_callbacks): Remove SIM_DESC argument.
834 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
836 * configure: Regenerated to track ../common/aclocal.m4 changes.
838 Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com>
840 * interp.c (sim_open): Undo patch to add -E support.
842 Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
844 * interp.c (sim_stop): New function.
846 Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com>
848 * Makefile.in (SIM_OBJS): Add sim-load.o.
849 * d10v_sim.h (exec_bfd): Rename to prog_bfd.
850 * interp.c: #include bfd.h.
851 (myname, sim_kind, start_address): New static locals.
852 (prog_bfd_was_opened_p, prog_bfd): New static locals.
853 (decode_pc): Update to use prog_bfd.
854 (sim_open): Set sim_kind, myname. Ignore -E arg.
855 (sim_close): Close prog_bfd if simulator opened it.
856 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
857 (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
858 Call sim_load_file to load file into simulator.
859 * simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
861 Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
863 * simops.c (OP_5F00): Only provide system calls SYS_execv,
864 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
866 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
868 * configure: Regenerated to track ../common/aclocal.m4 changes.
871 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
873 * interp.c (sim_open): New arg `kind'.
875 * configure: Regenerated to track ../common/aclocal.m4 changes.
877 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
879 * configure: Regenerated to track ../common/aclocal.m4 changes.
881 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
883 * configure: Re-generate.
885 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
887 * configure: Regenerate to track ../common/aclocal.m4 changes.
889 * simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same
890 as trap 0, which will be deprecated. Only set errno, if an error
891 in fact was returned.
893 Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com>
895 * interp.c: Delete redundant prototypes of sim_foo fns.
896 (sim_open): New SIM_DESC result. Argument is now in argv form.
897 (other sim_*): New SIM_DESC argument.
899 Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com>
901 * simops.c (trace_{input,output}_func): Call flush_stdout from the
904 (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
905 (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
906 setting the carry bit after an add or a subtract.
908 Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com>
910 * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
911 40 bits of accumulators. Sign/zero extend as appropriate.
913 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
915 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
916 COMMON_{PRE,POST}_CONFIG_FRAG instead.
917 * configure.in: sinclude ../common/aclocal.m4.
918 * configure: Regenerated.
920 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
922 * configure configure.in Makefile.in: Update to new configure
923 scheme which is more compatible with WinGDB builds.
924 * configure.in: Improve comment on how to run autoconf.
925 * configure: Re-run autoconf to get new ../common/aclocal.m4.
926 * Makefile.in: Use autoconf substitution to install common
929 Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com)
931 * gencode.c: patch to not #include "d10v_sim.h" which
932 unecessarily includes bfd.h and causes wingdb configure
935 Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
937 * interp.c (xfer_mem): Change unified memory to 0x0.
939 Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com>
941 * simops.c (OP_3E01): Fix tracing information.
942 (OP_300{0,1}): Do not propigate sign.
944 Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com>
946 * config.in (WORDS_BIGENDIAN): Add.
947 * configure: Regenerated.
948 * d10v_sim.h: #include "config.h"
950 Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
952 * gencode.c (write_opcodes): Eliminate warnings when generated
955 Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
957 * interp.c (sim_open): Cast result of calloc, and make sure NULL
959 (dmem_addr): If address is illegal or in I/O space, signal a bus
961 (pc_addr): Signal bus error, not illegal instruction for bogus
964 Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com>
966 * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
967 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
968 * configure.in: Simplify using macros in ../common/aclocal.m4.
969 Call AC_CHECK_HEADERS(unistd.h).
970 * configure: Regenerated.
971 * config.in: New file.
972 * interp.c: #include "callback.h".
973 * simops.c: #include "config.h". #include <unistd.h> if present.
975 Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
977 * d10v-sim.h (simops): Add flag is_long.
978 (State): Add pc_changed. Instructions which update the PC should
979 use the JMP macro which sets this.
980 (JMP): New macro. Sets the PC and the pc_changed flag.
982 * gencode.c (write_opcodes): Add is_long field.
984 * interp.c (lookup_hash): If we blindly apply a short opcode's mask
985 to a long opcode we could get a false match. Check the opcode size.
986 (hash): Add a size field to the hash table.
987 (sim_open): Initialize size field in hash table.
988 (sim_resume): Change to logic for setting the PC. Used to increment the
989 PC if it had not been changed. This didn't allow single-instruction loops.
990 Now checks the flag State.pc_changed. Also now stops when ^C is received.
991 (dmem_addr): Fix translation of data segments to unified memory.
992 (sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
994 * simops.c: Changed all branch and jump instructions to use new JMP macro.
995 (OP_20000000): Corrected trace information to show this is a ldi.l, not
998 Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1000 * interp.c (sim_fetch_register, sim_store_register): Fix bug where
1001 updating the accumulators was overwriting other parts of the global
1004 Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1006 * interp.c (bfd.h) Don't include it here any more.
1007 (text{,_start,_end}): Move here from simops.c and make extern.
1008 (decode_pc): New function to return the PC as an address that the
1010 (dmem_addr): Print decoded PC in error message.
1013 * simops.c (bfd.h) Don't include it here any more.
1014 (text{,_start,_end}): Move to simops.c.
1015 (trace_input_func): Move decoding of PC, and looking up .text
1018 * d10v_sim.h (bfd.h): Include it here.
1019 (text{,_start,_end}): Add external declarations.
1023 Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1025 * interp.c (sim_size): Now allocates unified memory for imap segments
1026 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
1027 (sim_write): Just call xfer_mem().
1028 (sim_read): Just call xfer_mem().
1029 (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
1030 (dmem_addr): New function. Reads dmap register and translates data
1031 addresses to local addresses.
1032 (pc_addr): New function. Reads imap register and computes local address
1033 corresponding to contents of the PC.
1034 (sim_resume): Change to use pc_addr().
1035 (sim_create_inferior): Change reinitialization code. Also reinitializes
1037 (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
1038 (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
1040 * simops.c (MEMPTR): Redefine to use dmem_addr().
1041 (OP_5F00): Replace references to STate.imem with dmem_addr().
1043 * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
1044 (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
1045 (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
1047 Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1049 * d10v_sim.h (_ins_type): Reorganize, so that we can provide
1050 better statistics, like not counting NOPS as parallel
1051 instructions, and printing total cycles.
1052 (ins_type_counters): Make unsigned long.
1053 (left_nops,right_nops): Fold into ins_type_counters.
1055 * simops.c (trace_input_func): Print new instruction types.
1056 Handle OP_R2R3 as input types.
1057 (OP_{38000000,7000}): Correctly sign extend bytes.
1058 (OP_5E00): Don't count NOPs as parallel instructions.
1059 (OP_460B): Remove unused variable.
1062 * interp.c (ins_type_counters): Make unsigned long.
1063 (left_nops,right_nops): Delete.
1064 (most functions): Add prototypes.
1065 (INLINE): If GCC and optimize define as __inline__.
1066 ({,lookup_}hash,get_operands): Declare as INLINE.
1067 (do_parallel): Count conditional operations.
1068 (add_commas): New function, to add commas every 3 digits.
1069 (sim_size): Call add_commas to print numbers.
1070 (sim_{open,resume}): Delete unused variables.
1071 (sim_info): Provide better statistics.
1072 (sim_read): Add int return type.
1074 Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1076 * interp.c (sim_resume): Change the way single-stepping and exceptions
1077 are handled so single-stepping works again.
1079 Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1081 * endian.c: Optimize simulated loads/stores on x86, AIX, and big
1084 * configure.in (--enable-sim-bswap): New switch to enable using
1085 the BSWAP instruction on x86's.
1086 * configure: Regenerate.
1088 * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
1091 Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1093 * endian.c: New file. Move endian functions here from interp.c.
1094 Optimize code, and make it work as either inline functions or as a
1097 * interp.c: Move endian functions from here to endian.c.
1099 * Makefile.in (INCLUDE): Add endian.c.
1100 (run,libsim.a): Add dependency on endian.o.
1101 (endian.o): Add dependency.
1103 * d10v_sim.h (read/write support): Always go through the machine
1104 independent endian functions. If compiling with GCC and
1105 optimizing, include endian.c so the endian functions are inlined.
1107 * simops.c (OP_5F00): Correct tracing of accumulators.
1109 Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1111 * simops.c (OP_5F00): Add support for getpid, kill system calls.
1113 * interp.c (do_{2_short,parallel}): If an exception is raised,
1114 don't execute the second instruction.
1116 Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1118 * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
1119 temporary in case the register is overriden when loading.
1120 (OP_6200): Output type is OP_DREG for tracing.
1122 Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1124 * d10v_sim.h (struct _state): Add mem_{min,max} fields.
1126 * interp.c (sim_size): Initialize mem_{min,max} fields.
1127 (sim_write): Update mem_{min,max} fields.
1128 (sim_resume): If PC is not in the minimum/maximum memory range,
1130 (sim_create_inferior): Preserve mem_{min,max} fields.
1132 Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com>
1134 * simops.c (OP_5F00): Add support for time() system call.
1136 Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1138 * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
1140 (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
1143 Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1145 * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
1146 (trace_input_func): Add support for OP_{CONSTANT8,R2,R3}.
1147 (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
1148 to call/subroutine returns to trace the first two arguments and
1149 the return value. For small jumps, use CONSTANT8, not CONSTANT16.
1151 Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1153 * interp.c (sim_create_inferior): Reinitialize State every time
1154 sim_create_inferior() is called.
1156 Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net>
1158 * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
1160 (OP_401): Fix tracing information.
1162 Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1164 * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
1165 (trace_input_func): Use them.
1166 (trace_input_func): Make sure there is a trailing space after the
1168 (OP_6200): Fix tracing info.
1170 * Makefile.in (run): Add dependencies on libbfd.a and
1173 Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1175 * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
1176 numbers and function names in debug trace.
1177 (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
1179 (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
1180 and exit system call trap being executed.
1182 * interp.c (sim_stop_reason): Set exit code correctly for stop
1183 instruction and exit system call trap.
1185 * configure.in (--enable-sim-cflags): Remove trace case.
1186 (--enable-sim-debug): New switch to set the debug values.
1187 * configure: Regenerate.
1189 * simops.c (trace_{input,output}_func): Rename from
1190 trace_{input,output}.
1191 (trace_{input,output}): Call trace_{input,output}_func if
1192 d10v_debug is non-zero.
1193 (SIZE_INSTRUCTION): Cut down to 8.
1194 (SIZE_OPERANDS): Cut down to 18.
1195 (SIZE_LOCATION): New value for size of line number, function name
1197 (init_text_p,text{,_start,_end}): New static variables for
1198 printing line number and function name.
1199 (exec_bfd): New external that run.c sets.
1200 (trace_input_func): Print line number and function name if
1201 available and if desired.
1202 (OP_4E09): Don't print out DBT message.
1203 (OP_5FE0): Set exception field to SIG_D10V_STOP.
1204 (OP_5F00): Set exception field to SIG_D10V_EXIT.
1206 Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1208 * interp.c (do_2_short): If the instruction encodes jump->ins,
1209 don't do the second instruction if the jump succeeds.
1211 Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1213 * simops.c (OP_5F00): Use unknown traps to print all GPRs,
1214 accumulators, PC, and F0/F1/C flags.
1216 Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com>
1218 * simops.c (OP_5F00): Fix problems with system calls.
1220 Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1222 * simops.c (OP_5F00): Correct tracing information for trap.
1224 Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1226 * Makefile.in (CSEARCH): Correctly find opcodes directory.
1228 Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1230 * simops.c (trace_output): Properly align accumulator output.
1231 (OP_3{0,2,4}00): Properly parenthesize test expression. Add error
1232 if shift count is too high.
1233 (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
1234 (OP_4E09): Make cpfg properly trace the input flags.
1235 (op_types): Add OP_FLAG_OUTPUT.
1236 (trace_{input,output}): Support OP_FLAG_OUTPUT.
1237 (OP_31000000): This ld2w varient is a 16-bit memory reference, not
1238 an 8-bit memory reference instruction for tracing purposes.
1239 (OP_201): Addi needs to set the carry.
1241 Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1243 * simops.c (OP_2600, OP_2601): Changed min and max comparisons
1244 to use signed register values.
1246 Wed Sep 4 11:35:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1248 * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
1250 (_ins_type): New enumeration to specify which container an
1251 instruction is in, and whether it is part of a parallel operation.
1252 (_state): Add ins_type field.
1253 ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
1254 (ins_type_counters): Counters for the various instruction types.
1255 ({left,right}_nops): Counters for the number of nops in each
1257 (d10v_debug): New variable to indicate whether debugging is turned
1260 * simops.c: (all functions): Change all #ifdef DEBUG code so that
1261 the input and output values can be traced, along with the
1262 instruction type. Make the -t option enable tracing.
1263 (all functions): Change printf calls to use the printf_filtered
1264 function in the callback table.
1266 * interp.c (_leftright): New enumeration to say whether 2 short
1267 instructions are done left first or right first.
1268 (do_{long,2_short,parallel}): Indicate in the machine state which
1269 type of instruction this is. Count each of the types of
1270 instructions executed.
1271 (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
1273 (sim_resume): Pass left/right indication to do_2_short.
1274 (all functions): Change printf calls to use the printf_filtered
1275 function in the callback table.
1276 (sim_trace): Turn on debug flag if DEBUG was defined, and call
1278 (sim_info): Print out statistics on instructions.
1279 (sim_{trace,create_inferior}): Eliminate extraneous output unless
1281 (sim_open): If args == -t and DEBUG was defined, set d10v_debug.
1282 Only initialize the hash table the first time sim_open is called.
1284 * Makefile.in: Make objects depend on d10v_sim.h.
1285 ({,SIM_}CFLAGS): Include configure dependent switches. Setting
1286 CFLAGS does not override host/target defines or SIM_CFLAGS.
1287 (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
1288 (run): By default, the math library is not needed to be linked
1290 ({BFD,LIBIBERTY}_LIB): Define as variables so they can be
1292 (VPATH): Don't set to anything but @srcdir@ to work with non-GNU
1294 ({run,callback}.o): Provide explicit paths to their appropriate
1296 (gencode{,.o},d10v-opc.o): Split compilation into creating object
1297 and linking. Instead of linking in libopcodes.a, just compile
1298 d10v-opc.o directly to handle canadian cross.
1299 (CSEARCH): Add opcodes directory.
1301 * configure.in (--enable-sim-cflags): New switch to allow user to
1303 (CC_FOR_BUILD): Deal with canadian crosses.
1304 * configure: Regenerate.
1306 Wed Sep 04 04:45:34 1996 Mark Alexander <marka@cygnus.com>
1308 * simops.c: Include correct syscall.h for d10v, not host's.
1309 Fix #ifdef SYS_stat.
1311 Tue Sep 3 14:00:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1313 * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
1314 Add trap 2 to be printf and trap 3 to be putchar.
1316 Wed Aug 28 21:42:34 1996 Mark Alexander <marka@cygnus.com>
1318 * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
1319 for low-level system calls.
1321 Wed Aug 28 17:33:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1323 * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
1325 Mon Aug 26 18:30:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1327 * d10v_sim.h (SEXT32): Added.
1328 * interp.c: Commented out printfs.
1329 * simops.c: Fixed error in sb and st2w.
1331 Thu Aug 15 13:30:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1333 * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
1334 DSP instructions. Added modulo addressing.
1336 Sun Aug 11 12:57:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1338 * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
1340 Fri Aug 2 17:44:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1342 * d10v_sim.h, simops.c: Snapshot.
1344 Thu Aug 1 17:05:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1346 * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
1347 gencode.c, interp.c, simops.c: Created.