1 2000-07-05 Nick Clifton <nickc@cygnus.com>
3 * d30v-insns: Change minimum loop size limit to 0x10.
5 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
7 * configure: Regenerated to track ../common/aclocal.m4 changes.
9 2000-04-12 Frank Ch. Eigler <fche@redhat.com>
11 * cpu.h (GPR_CLEAR): New macro.
12 (GPR_SET): Removed macro.
14 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
16 * configure: Regenerated to track ../common/aclocal.m4 changes.
18 Wed Sep 1 11:38:21 1999 Andrew Cagney <cagney@b1.cygnus.com>
20 * d30v-insns: Cast CIA to LONG in printfs.
22 Tue Aug 31 01:32:22 1999 Andrew Cagney <cagney@b1.cygnus.com>
24 * cpu.h (unqueue_writes): Add declaration.
26 1999-05-27 Michael Meissner <meissner@cygnus.com>
28 * d30v-insns (do_repeat): Print a warning if a REPEAT or REPEATI
29 instruction loop is too small.
31 1999-05-08 Felix Lee <flee@cygnus.com>
33 * configure: Regenerated to track ../common/aclocal.m4 changes.
35 1999-03-16 Martin Hunt <hunt@cygnus.com>
36 From Frank Ch. Eigler <fche@cygnus.com>
38 * cpu.h (mvtsys_left_p): New flag for MVTSYS instruction history.
39 * d30v-insns (mvtsys): Set this flag instead of left_kills_right_p.
40 (do_sath): Detect MVTSYS by new flag.
41 * engine.c (unqueue_writes): Detect MVTSYS by new flag.
42 (do_2_short, do_parallel): Initialize new flag.
44 1999-02-26 Frank Ch. Eigler <fche@cygnus.com>
46 * tconfig.in (SIM_HANDLES_LMA): Make it so.
48 1999-01-12 Frank Ch. Eigler <fche@cygnus.com>
50 * engine.c (unqueue_writes): Make PSW conflict resolution code
51 conditional - disable it for MVTSYS || insn case.
53 1999-01-11 Frank Ch. Eigler <fche@cygnus.com>
55 * d30v-insns (do_sath): Drain PSW write queue before PSW_S_FLAG
57 * engine.c (unqueue_writes): Make non-static. Remove PSW_V/VA
59 (do_parallel): Don't drain PSW write queue for MVTSYS || insn.
61 1999-01-07 Frank Ch. Eigler <fche@cygnus.com>
63 * d30v-insns (do_ld2h): Sign-extend loaded half-words.
65 1999-01-05 Frank Ch. Eigler <fche@cygnus.com>
67 * d30v-insns (do_ld2h): Read memory in word units.
68 (do_ld4bh): Ditto. Correct sign extension.
70 (do_st2h): Write memory in word units.
72 (st4hb): Correct mnemonic in igen template.
74 1998-12-08 Frank Ch. Eigler <fche@cygnus.com>
76 * d30v-insns: (do_ld2h): Don't update R0 nor R1 for double-word insn.
82 1998-12-03 Frank Ch. Eigler <fche@cygnus.com>
84 * d30v-insns (do_repeat): Don't set RP for repeat count 1.
86 1998-12-03 Frank Ch. Eigler <fche@cygnus.com>
88 * d30v-insns (do_src): Treat shift count -32 naturally instead of
89 producing zero result.
91 1998-11-22 Frank Ch. Eigler <fche@cygnus.com>
93 * d30v-insns (do_src): Limit SRC shift count to -32 .. 31.
95 1998-11-16 Frank Ch. Eigler <fche@cygnus.com>
97 * d30v-insns (dbt): Defer PSW/DPSW update with new DID_TRAP code 2.
98 * engine.c (unqueue_writes): Perform DBT processing on PSW/DPSW here.
100 1998-11-12 Frank Ch. Eigler <fche@cygnus.com>
102 * cpu.h (_sim_cpu): Removed is_delayed_call field, and associated
104 * sim-calls.c (sim_create_inferior): Don't initialize is_delayed_call.
105 * d30v-insns (do_dbra): Don't clear RPT_IS_CALL. (do_dbrai): Ditto.
106 (do_djmp): Ditto. (do_djmpi): Ditto. (do_repeat): Ditto.
107 * d30v-insns (do_dbsr): Don't set RPT_IS_CALL, but set R62 instead.
108 (do_dbsri): Ditto. (do_djsr): Dito. (do_djsri): Ditto.
109 * engine.c (sim_engine_run): Remove conditional setting of R62 based
112 1998-11-08 Frank Ch. Eigler <fche@cygnus.com>
114 * sim-calls.c (sim_open): Add dummy memory range over control
115 register region (0x40000000..0x4000FFFF).
117 1998-11-06 Frank Ch. Eigler <fche@cygnus.com>
119 * d30v-insns (do_mvfacc): Use loop to limit shift count to 63 .. 0.
121 Tue Oct 13 11:01:16 1998 Frank Ch. Eigler <fche@cygnus.com>
123 * d30v-insns (do_sra,do_srah,do_srl,do_srlh): Make shift
124 count -32 to produce zero result.
125 (do_src): Ditto for shift count == -64.
127 Mon Oct 12 23:04:11 1998 Frank Ch. Eigler <fche@cygnus.com>
129 * d30v-insns (ROT): Use 0x1f bit mask for rotate count masking.
130 (do_sra,do_srl): Use loop to limit shift count to -32 .. 31.
131 (do_srah,do_srlh): Use loop to limit shift count to -32 .. 31.
132 (sra2h,srl2h): Use loop to limit shift count to -16 .. 15.
133 (do_src): Use loop to limit shift count to -64 .. 63.
135 Fri Oct 9 16:46:52 1998 Doug Evans <devans@canuck.cygnus.com>
137 * sim-calls.c (get_insn_name): New fn.
138 (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
139 * sim-main.h (MAX_INSNS,INSN_NAME): Delete.
141 Mon Sep 28 10:43:28 1998 Frank Ch. Eigler <fche@cygnus.com>
143 * d30v-insns (do_sra,do_srah,do_srl,do_srlh,ROT,do_src): Use
144 correct MSB bit numbers for sign extension masks.
146 Fri Sep 25 17:32:27 1998 Frank Ch. Eigler <fche@cygnus.com>
148 * engine.c (do_parallel): Unqueue writes if MU instruction was
149 a MVTSYS, as identified by its left_kills_right_p side-effect.
151 Fri Sep 25 12:31:34 1998 Frank Ch. Eigler <fche@cygnus.com>
153 * d30v-insns (do_sra,do_srah,do_srl,do_srlh,ROT,do_src): Mask
154 shift/rotate counts to number of bits in width of operand; no
155 longer saturate at maxima.
157 Tue Jul 14 18:39:23 1998 Frank Ch. Eigler <fche@cygnus.com>
159 * cpu.h (left_kills_right_p): New flag for non-branch instructions
160 that, when executed in left slot of a -> sequential pair, kill the
162 * d30v-insns (mvtsys): Set flag for PSW/PSWh/PSWl/FLAG operands.
163 * engine.c (do_2_short): Respect flag.
165 Thu Jun 4 16:48:58 1998 David Taylor <taylor@texas.cygnus.com>
167 * d30v-insns (do_trap): don't save the bPSW and PSW based on
168 current values because an instruction done in parallel with
169 the trap might change them, instead set a flag do that
170 unqueue_writes will take care of it.
171 * engine.c (unqueue_writes): finish trap handling
172 * cpu.h (_sim_cpu): add new field did_trap and a macro DID_TRAP
173 to make use of it; set by do_trap, tested and cleared by
176 Tue May 19 16:07:04 1998 Frank Ch. Eigler <fche@cygnus.com>
178 * engine.c (unqueue_writes): Suppress the all enqueued writes to
179 the same flags in PSW except the last.
181 Fri May 15 11:38:59 1998 Frank Ch. Eigler <fche@cygnus.com>
183 * d30v-insns (RETI): Correct instruction spelling to "reit".
185 Thu May 14 09:34:20 1998 Frank Ch. Eigler <fche@cygnus.com>
187 * d30v-insns (dbt): Handle DBT at end of repeat block.
188 (do_trap, dbt): Clear PSW_RP if at end of repeat block.
190 Thu May 14 07:41:41 1998 Frank Ch. Eigler <fche@cygnus.com>
192 * engine.c (sim_engine_run): Trigger DDBT based on previous PC,
195 Wed May 13 11:03:40 1998 Frank Ch. Eigler <fche@cygnus.com>
197 * engine.c (sim_engine_run): Move DDBT handling after instruction
198 decode/execute stage.
200 Tue May 12 12:14:53 1998 Frank Ch. Eigler <fche@cygnus.com>
202 * d30v-insns (do_sat*): Correct "saturate to 0 bits" patch to
203 properly handle negative saturation inputs.
205 Tue May 12 11:11:26 1998 Frank Ch. Eigler <fche@cygnus.com>
207 * engine.c (sim_engine_run): Decrement RPT_C only under more
208 restricted conditions.
210 Mon May 11 17:33:46 1998 Frank Ch. Eigler <fche@cygnus.com>
212 * d30v-insns (do_sat*): Make "saturate to 0 bits" pass through data
215 Mon May 11 16:27:04 1998 Frank Ch. Eigler <fche@cygnus.com>
217 * engine.c (sim_engine_run): Implement DDBT (debugger debug trap)
220 Fri May 8 16:44:19 1998 Frank Ch. Eigler <fche@cygnus.com>
222 * d30v-insns (do_trap): Set bPC to RPT_S if trap is last
223 instruction in repeat block.
224 (bsr*/jsr*): Set R62 (LINK) to RPT_S if subroutine branch
225 is last instruction in repeat block.
227 Fri May 8 11:06:50 1998 Frank Ch. Eigler <fche@cygnus.com>
229 * d30v-insns (do_sath): Query/update F4/PSW_S using proper flag
231 * cpu.h (PSW_S_FLAG): New flag number for PSW_S status bit.
233 Wed May 6 19:40:56 1998 Doug Evans <devans@canuck.cygnus.com>
235 * sim-main.h (INSN_NAME): New arg `cpu'.
237 Fri May 1 14:24:30 1998 Andrew Cagney <cagney@b1.cygnus.com>
239 * d30v-insns: Fix parameter list to sim_engine_abort.
241 Thu Apr 30 14:28:00 1998 Fred Fish <fnf@cygnus.com>
243 * d30v-insns (do_sath): Add additional argument that determines
244 whether or not the F4 (PSW_S) bit in the PSW is updated.
245 (SAT2H): Do not update PSW_S bit.
246 (SATHp): Do update PSW_S bit.
248 Tue Apr 28 23:36:00 1998 Fred Fish <fnf@cygnus.com>
250 * d30v-insns (SRAHp, SRLHp): Immediate values are signed 6 bit
251 values, not 5 bit values.
253 Wed Apr 29 12:57:55 1998 Frank Ch. Eigler <fche@cygnus.com>
255 * d30v-insns (do_incr): Check modular arithmetic limits after
256 postincrement/postdecrement, rather than before, to match
257 erroneous hardware behavior.
259 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
261 * configure: Regenerated to track ../common/aclocal.m4 changes.
263 Mon Apr 27 19:42:00 1998 Fred Fish <fnf@cygnus.com>
265 * d30v-insns (do_trap): Clear all bits in PSW except SM and DB.
267 Mon Apr 27 14:55:00 1998 Fred Fish <fnf@cygnus.com>
269 * d30v-insns (do_mulx2h): Low order results go in ra+1, high
272 Mon Apr 27 14:42:00 1998 Fred Fish <fnf@cygnus.com>
274 * d30v-insns (do_mulx2h): Rewrite to do proper 32 bit signed
275 multiply of high and low fields from operands.
277 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
279 * configure: Regenerated to track ../common/aclocal.m4 changes.
282 Sun Apr 26 15:20:20 1998 Tom Tromey <tromey@cygnus.com>
284 * acconfig.h: New file.
285 * configure.in: Reverted change of Apr 24; use sinclude again.
287 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
289 * configure: Regenerated to track ../common/aclocal.m4 changes.
292 Fri Apr 24 11:20:00 1998 Tom Tromey <tromey@cygnus.com>
294 * configure.in: Don't call sinclude.
296 Wed Apr 22 21:23:00 1998 Fred Fish <fnf@cygnus.com>
298 * ic-d30v (RbU, RcU): Unsigned versions of Rb and Rc.
299 * d30v-insns (MVTACC): Use new RbU and RcU macros.
301 Wed Apr 22 20:52:00 1998 Fred Fish <fnf@cygnus.com>
303 * ic-d30v (RbHU,RbLU): Unsigned versions of RbH and RbL.
304 * d30v-insns (SRL2H): Use new RbHU and RbLU macros instead of
307 Mon Apr 13 16:59:00 1998 Fred Fish <fnf@cygnus.com>
309 * d30v-insns (do_srl): Avoid undefined behavior of host compiler
310 when shifting left by more than 31 bits.
312 Tue Apr 7 18:09:00 1998 Fred Fish <fnf@cygnus.com>
314 * engine.c (sim_engine_run): Remove at_loop_end variable. Add
315 rp_was_set and rpt_c_was_nonzero variables. Major restructuring of
316 code before and after instruction execution to properly handle state
317 of the RP bit in the PSW, the value in RPT_C, and other loop related
320 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
322 * configure: Regenerated to track ../common/aclocal.m4 changes.
324 Fri Apr 3 15:26:00 1998 Fred Fish <fnf@cygnus.com>
326 * d30v-insns (do_trap): Use offset from EIT_VB rather than hardcoded
327 BASE_ADDRESS constant.
328 * cpu.h (BASE_ADDRESS): Remove constant not used any longer.
330 Fri Apr 3 14:42:00 1998 Fred Fish <fnf@cygnus.com>
332 * cpu.h (EIT_VB): Define macro to access EIT_VB register.
333 (EIT_VB_DEFAULT): Define value of EIT_VB register after reset.
334 * sim-calls.c (sim_create_inferior): Set EIT_VB to EIT_VB_DEFAULT.
336 Tue Mar 31 19:00:00 1998 Fred Fish <fnf@cygnus.com>
338 * d30v-insns (do_dbrai): RPT_S is cia plus pcdisp rather than
341 Mon Mar 30 20:30:00 1998 Fred Fish <fnf@cygnus.com>
343 * engine.c (sim_engine_run): Add at_loop_end. Rework end of loop
344 code to use this to both reset PSW_RP when needed and to set PC
345 to RPT_S for another pass through the loop.
347 Mon Mar 30 16:12:00 1998 Fred Fish <fnf@cygnus.com>
349 * engine.c (sim_engine_run): Change code that handles RPT_* regs
350 and PSW_RP bit in PSW so that PSW_RP is always set while executing
351 the loop and loop terminates upon completion of the pass for which
352 RPT_C is zero. More closely follow logic in architecture manual.
354 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
356 * configure: Regenerated to track ../common/aclocal.m4 changes.
358 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
360 * configure: Regenerated to track ../common/aclocal.m4 changes.
362 Thu Mar 19 00:25:43 1998 Andrew Cagney <cagney@b1.cygnus.com>
364 * sim-calls.c (sim_open): Move memory-region commands back to
365 before the call to sim_parse_args.
366 (d30v_option_handler): Implement extmem-size option using
367 memory-delete and memory-region commands.
369 * sim-calls.c (d30v_option_handler): Use ANSI-C argument list,
370 correct number and type of arguments.
372 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
374 * configure: Regenerated to track ../common/aclocal.m4 changes.
376 Wed Mar 11 13:56:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
378 * alu.h (IMEM, MEM, STORE): Replace sim_core_*_map with exec_map,
379 read_map and write_map resp.
381 * cpu.c (d30v_read_mem, d30v_write_mem): Ditto.
383 Mon Mar 2 13:34:08 1998 Fred Fish <fnf@cygnus.com>
385 * d30v-insns (do_repeat): Abort repeat instructions that have
386 a repeat count of zero.
388 Fri Feb 27 18:44:12 1998 Doug Evans <devans@canuck.cygnus.com>
390 * sim-calls.c (sim_open): Update call to sim_add_option_table.
392 Thu Feb 26 18:34:31 1998 Andrew Cagney <cagney@b1.cygnus.com>
394 * sim-calls.c (sim_info): Delete.
396 Wed Feb 25 14:44:58 1998 Michael Meissner <meissner@cygnus.com>
398 * d30v-insns (mvtsys): If moving to EIT_VB register, and with
399 valid bits. Optimize code somewhat.
401 * cpu.h (eit_vector_base_cr): New CR we need to special case.
402 (EIT_VALID): Valid bits for EIT_VB register.
404 * d30v-insns (mv{f,t}sys): When moving to/from PSWH, the value is
405 in the low 16 bits of the register.
407 * d30v-insns (do_sra): Use a common WRITE32_QUEUE to write back
409 (do_sr{a,l}h): Do shift in 32 bits, only truncate when writing
410 result back to the registers.
412 Tue Feb 24 18:09:52 1998 Fred Fish <fnf@cygnus.com>
414 * Makefile.in (tmp-igen): Use -G gen-zero-r0 option to force
415 r0 to always be zero.
416 * cpu.h (GPR_SET): Define.
418 Tue Feb 24 14:12:57 1998 Michael Meissner <meissner@cygnus.com>
420 * d30v-insns (do_sath): Do saturation in 32 bits, before
422 (sat{,2h,z,hp}): Use imm_5, not imm to get proper zero extend.
423 (do_sath_p): Delete, no longer used.
424 (sathp): Call do_sath, not do_sath_p.
426 Mon Feb 23 15:55:14 1998 Michael Meissner <meissner@cygnus.com>
428 * d30v-insns (illegal,wrong_slot): Print \n after PC and before we
429 call sim_engine_halt.
430 (sr{a,l}hp): Implement missing instructions.
431 (do_trap): Print high order PSW bits in human readable fashion.
432 (do_{dbra{,i},dbsr{,i},djmp{,i},djsr{,i},repeat}): Set PSW bit RP.
434 * alu.h (PSW_SET_QUEUE): New macro to set PSW bits.
436 * engine.c (sim_engine_run): Check for RP bit being set, not RPT_C
437 being > 0. If RPT_C is decremented to 0, clear PSW RP bit.
439 Fri Feb 20 10:13:34 1998 Fred Fish <fnf@cygnus.com>
441 * cpu.h (BASE_ADDRESS): Change from 0xfffff000 to 0xfffff020.
443 Tue Feb 17 12:39:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
445 * sim-calls.c (sim_store_register, sim_fetch_register): Pass in
446 length parameter. Return -1.
448 Fri Feb 6 17:39:54 1998 Michael Meissner <meissner@cygnus.com>
450 * d30v-insns (do_dbrai): Correct typo, use shift, not comparison.
452 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
454 * configure: Regenerated to track ../common/aclocal.m4 changes.
456 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
458 * configure: Regenerated to track ../common/aclocal.m4 changes.
460 Fri Jan 30 08:29:20 1998 Andrew Cagney <cagney@b1.cygnus.com>
462 * engine.c (sim_engine_run): Add parameter nr_cpus.
464 Fri Jan 30 17:09:37 1998 Michael Meissner <meissner@cygnus.com>
466 * d30v-insns (jsrtzr): Check for register == 0, not != 0.
468 Wed Jan 21 17:52:04 1998 Andrew Cagney <cagney@b1.cygnus.com>
470 * engine.c (do_stack_swap): Make type of new_sp unsigned.
472 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
474 * configure: Regenerated to track ../common/aclocal.m4 changes.
476 Mon Jan 5 16:04:17 1998 Andrew Cagney <cagney@sanguine.cygnus.com>
478 * sim-calls.c (sim_info): Call profile_print.
480 * sim-main.h: Enable instruction profiling.
482 Thu Dec 18 12:21:38 1997 Michael Meissner <meissner@cygnus.com>
484 * alu.h (ALU{16,32}_END): Change setting PSW to only set the carry
485 and overflow bits. Don't look at the current value of PSW.
486 (PSW_FLAG_SET_QUEUE): Only queue up setting the particular bit in
487 question. Don't look at the current value of PSW.
489 * d30v-insns: All instructions that set the PSW, will only queue
490 up the particular bits in question that were set by the
491 instruction. Don't look at the current value of PSW.
493 Wed Dec 17 11:41:44 1997 Michael Meissner <meissner@cygnus.com>
495 * cpu.h (PSW_VALID): Allow EA/DB to be set in the PSW.
496 (DPSW_VALID): Like PSW_VALID, but it allows the DS bit to be set.
498 * engine.c (trace_alu32): When changing BPSW/DPSW, print the
501 * d30v-insns (do_cmp_cc): Fix cmpps and cmpng.
502 (do_cmp{,u}_cc): Print which cc value was used if not in switch
504 (do_cmpu_cc): Remove illegal cases CMPU{EQ,NE,PS,NG}.
505 (mvtsys): When setting BPSW or DPSW, and with DPSW_VALID.
507 Tue Dec 16 18:17:26 1997 Michael Meissner <meissner@cygnus.com>
509 * d30v-insns (mulx2h): Add missing instruction. Complain if
510 register is not even.
511 (do_{add,sub}h_ppp): Get correct high/low values. Also correctly
512 handle short immediates.
513 (do_ld{2w,4bh}): Don't load r0 if ra == 0.
515 * engine.c (d30v_interrupt_event): Remove unused variable
516 (unqueue_writes): Ditto.
518 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
520 * configure: Regenerated to track ../common/aclocal.m4 changes.
523 Sat Dec 13 23:40:17 1997 Michael Meissner <meissner@cygnus.com>
525 * cpu.h (_write{32,64}): New structures for keeping track of
526 queued writes to registers.
527 (_sim_cpu): Add _write{32,64} structures. Make is_delayed_call
529 (WRITE{32,64}*): New macros for queueing up writes to registers.
531 * alu.h (ALU16_END): Take field that says whether we are setting
532 the high or low half word. Queue up changes to registers.
533 (ALU32_END): Queue up changes to registers.
534 (PSW_FLAG_SET_QUEUE): Like PSW_FLAG_SET, except queues it up.
536 * sim-main.h (do_stack_swap): Remove declaration.
538 * engine.c (do_stack_swap): Make static.
539 (unqueue_writes): New function to unqueue all changes to 32 and 64
540 bit registers in order. Implement --trace-alu. Reset high water
541 marks for # of queued registers. If PSW changed, possibly update
543 (do_{long,2_short,parallel}): Unqueue register writes at the
546 * d30v-insns: Modify all insns to queue changes to registers,
547 rather than do them immediately so that parallel instructions get
548 the right values for inputs. Rewrite 16 bit operations to be done
549 in terms of masked 32 bit registers. Don't call do_stack_swap any
552 Thu Dec 11 10:06:02 1997 Michael Meissner <meissner@cygnus.com>
554 * sim-calls.c (d30v_option_handler): Add support for --extmem-size
555 to size external memory.
556 (sim_open): Ditto. Default if no --extmem-size option is 8 meg.
558 Wed Dec 10 01:08:24 1997 Jim Blandy <jimb@zwingli.cygnus.com>
560 * d30v-insns (do_rot2h): Clip rotate amounts to four bits. The
561 upper bits, and the sign of the rotation amount, are red herrings.
562 (do_sra, do_srl): Handle shifts greater than 32 bits.
563 (do_srah, do_sral): Properly sign-extend value and shift amount.
564 Handle shifts larger than 16 bits.
566 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
568 * configure: Regenerated to track ../common/aclocal.m4 changes.
570 Mon Dec 1 15:10:44 1997 Michael Meissner <meissner@cygnus.com>
572 * d30v-insns (do_sub2h): For short instruction, correctly
573 dupplicate lower 16 bits of immediate in upper 16 bits.
574 (sat2z): Fix typo that ignored the upper half of the register.
575 (do_satz): If < 0, set *ra to 0, if not call do_sat.
576 (mvtsys): Before setting PSW, and with PSW_VALID.
578 * cpu.h (PSW_VALID): Mask for bits in PSW that is valid.
580 Mon Dec 1 15:05:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
582 * d30v-insns (do_trap): Pacify GCC - correct type of %ld arg in
583 printf, return dummy at end.
585 Mon Dec 1 15:05:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
587 * d30v-insns (do_add, do_addh_ppp, do_adds): Replace ALU_ADD with
589 (do_addc): Replace ALU_SET_CARRY / ALU_ADD_CA with ALU_ADDC_C.
590 (do_sub, do_subh_ppp): Replace ALU_SUB with ALU_SUBB.
591 (do_subb): Replace ALU_SET_CARRY / ALU_SUB_CA with ALU_SUBB_B.
593 * alu.h (ALU16_END): Use ALU16_HAD_CARRY_BORROW instead of
597 * sim-main.h (string.h, strings.h): Include.
599 * sim-calls.c: Delete inclusion of string.h and strings.h.
601 Sun Nov 30 17:29:25 1997 Michael Meissner <meissner@cygnus.com>
603 * configure.in (--enable-sim-trapdump): New switch to control
604 whether traps 0..30 dump out the registers or do the real trap.
605 * configure: Regenerate.
607 * Makefile.in (SIM_EXTRA_CLFAGS): Add -DTRAPDUMP={0,1} if
608 appropriate --{en,dis}able-sim-trapdump is done.
610 * sim-calls.c (OPTION_TRACE_CALL): Rename from OPTION_CALL_TRACE.
611 (OPTION_TRACE_TRAPDUMP): New option for --trace-trapdump.
612 (d30v_option_handler): Add support for --trace-trapdump.
613 (d30v_options): Ditto.
616 * d30v-insns (do_trap): Do register dump if --trace-trapdump and
617 not the system call trap. Remove support for calling old function
620 Sat Nov 29 18:54:55 1997 Michael Meissner <meissner@cygnus.com>
622 * cpu.h (_sim_cpu): Add trace_call_p, trace_action fields.
623 (TRACE_CALL_P): Non-zero if --trace-call.
624 (TRACE_ACTION): Non-zero if there is a tracing action at the end
625 of processing an instruction boundary.
626 (TRACE_ACTION_{CALL,RETURN}): Bits to say trace call & return.
627 (d30v_next_insn): Delete, now trace_action field in cpu state.
629 * cpu.c (d30v_next_insn): Delete, now trace_action field in cpu
631 (return_occurred): Minimum saved register to check is now 34.
633 * engine.c (sim_engine_run): Change call tracing to use
634 trace_action field in cpu state.
636 * sim-calls.c (d30v_option_handler): Handle d30v specific options.
637 (d30v_options): D30V specific options. Right now, --trace-call.
638 (sim_open): Register d30v specific options.
640 * d30v-insns (call, return insns): Move --trace-debug call/return
641 tracing action to d30v specific --trace-call option.
643 Fri Nov 28 20:12:48 1997 Michael Meissner <meissner@cygnus.com>
645 * cpu.h (CREG): Rename from CR.
647 * d30v-insns (do_{addc,subb}): Explicitly import the carry bit.
648 (do_trap): Use CREG, not CR. Switch to using cb_syscall.
650 Thu Nov 27 19:25:43 1997 Michael Meissner <meissner@cygnus.com>
652 * cpu.h (ACC): Define as short cut to accumulators.
654 * d30v-insns (do_rot): Delete explicit function, use ROT32 to do
656 (do_trap): Make trap 30 print out accumulators and first 16
657 control registers as well.
658 (do_avg): Sign extend to 64 bit type before doing add/shift.
659 (do_avg2h): Sign extend 16 bit chunks before doing add/shift.
661 Wed Nov 26 15:20:24 1997 Doug Evans <devans@canuck.cygnus.com>
663 * Makefile.in (NL_TARGET): Define.
665 Wed Nov 26 16:55:38 1997 Michael Meissner <meissner@cygnus.com>
667 * cpu.h (d30v_next_insn): New flag for things we are supposed to
668 trace between instruction words.
669 ({call,return}_occurred): Remove index argument.
670 (d30v_{read,write}_mem): Add declarations.
672 * cpu.c (d30v_next_insn): New flag for things we are supposed to
673 trace between instruction words.
674 ({call,return}_occurred): Remove index argument.
675 (d30v_{read,write}_mem): New functions for reading/writing
676 simulated memory in the new common system call support.
678 * d30v-insns: Set emacs C mode.
679 (call/return insns): Set bit to trace call at instruction
680 boundary, rather than doing it here.
681 (do_trap): Set up to use new common system call interface.
683 * engine.c (sim_engine_run): If d30v_next_insn is non zero, do
684 function call/return tracing.
686 Mon Nov 24 16:40:49 1997 Michael Meissner <meissner@cygnus.com>
688 * d30v-insns (bnot): Correctly reset bit in question.
689 (do_trap): Use common system call emulation support, rather than
690 our home grown support.
692 Sun Nov 23 22:47:20 1997 Michael Meissner <meissner@cygnus.com>
694 * d30v-insns (mvfacc): Immediate field is unsigned, allowing
695 shifts of up to 63 to be encoded. Also do shift signed, rather
698 * ic-d30v (IMM_6S): Add field for 6 bit unsigned constants.
700 * d30v-insns (cmpu): Short cmpu zero extends immediate, not sign
703 Sat Nov 22 19:04:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
705 * d30v-insns (illegal, wrong_slot): Replace SIGILL with
708 * sim-calls.c (signal.h): Do not include, replaced by
711 * sim-main.h (signal.h): Do not include, include sim-signal.h
714 Fri Nov 21 09:33:54 1997 Andrew Cagney <cagney@b1.cygnus.com>
716 * cpu.c (call_occurred): Use ZALLOC instead of xmalloc.
717 (return_occurred): Use zfree instead of free.
719 Wed Nov 19 13:28:09 1997 Michael Meissner <meissner@cygnus.com>
721 * Makefile.in ({l,s}_{support,semantics}.o): Depend on the include
722 files in $(ENGINE_H).
724 * d30v-insns (do_{add,addc,sub,subb}): ALU_{ADD,SUB}_CA now takes
725 a VAL argument to add/subtract along with the carry.
727 Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com>
729 * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS).
731 Tue Nov 18 13:56:15 1997 Michael Meissner <meissner@cygnus.com>
733 * d30v-insns (do_trap): Change to new system call numbers. Add
736 Mon Nov 17 14:43:45 1997 Michael Meissner <meissner@cygnus.com>
738 * d30v-insns (mulx): Add mulx instruction.
740 Sun Nov 16 19:06:56 1997 Michael Meissner <meissner@cygnus.com>
742 * cpu.c ({call,return}_occurred): New trace functions to mark
743 function calls and returns and check whether all saved registers
746 * cpu.h ({call,return}_occurred): Add declaration.
748 * d30v-insns ({bsr, jsr} patterns): Call call_occurred if
749 --trace-debug to trace function calls.
750 (jmp register pattern): If this is a jump r62 and --trace-debug,
751 call return_occurred to trace function calls.
752 (bsr{tnz,tzr}): Move setting r62 inside conditional against reg.
753 (do_ld2w): Grab memory in 64-bit chunk, to check alignment.
756 Sat Nov 15 20:57:57 1997 Michael Meissner <meissner@cygnus.com>
758 * d30v-insns: Undo changes from Nov. 11, allowing for odd register
759 pairs, since the machine doesn't support such usage. Trap on odd
760 registers, rather than give a warning. Keep do_src and do_trap
763 Fri Nov 14 11:59:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
765 * d30v-insns (do_trap): Pacify compiler warnings for printf calls.
767 Tue Nov 11 18:26:03 1997 Michael Meissner <meissner@cygnus.com>
769 * d30v-insns (not_r63_reg): Rename from make_even_reg, only check
770 for register being r63. Change callers ld2{h,w}, ld4bh{,u}.
771 (get_reg_not_r63): Rename from get_even_reg, and only check for
772 register r63. Change callers st2{w,h}, st4b.
773 (do_src): Correct register pair for shift left.
774 (do_trap): Temporarily make trap 30 print out the registers.
776 Tue Nov 4 08:51:22 1997 Michael Meissner <meissner@cygnus.com>
778 * d30v-insns (do_trap): Make trap 31 be used for system calls.
779 Add primitive write and exit system calls.
781 * Makefile (FILTER): New make variable to filter out known igen
783 (tmp-igen): Add $(FILTER) on all 3 invocations of igen to filter
784 out warnings that should be ignored by default.
786 Fri Oct 31 19:36:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
788 * sim-calls.c (sim_open): Change EIT to memory region.
790 Fri Oct 17 16:51:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
792 * alu.h (ALU16_END): Get result from ALU16_OVERFLOW_RESULT.
793 (ALU32_END): Get result from ALU32_OVERFLOW_RESULT.
795 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
797 * configure: Regenerated to track ../common/aclocal.m4 changes.
799 Mon Sep 29 15:23:35 1997 Stu Grossman <grossman@babylon-5.cygnus.com>
801 * d30v-insns (MVFSYS MVTSYS): Fix bit patterns so that these
802 instructions get recognised.
804 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
806 * configure: Regenerated to track ../common/aclocal.m4 changes.
808 Wed Sep 24 17:51:43 1997 Stu Grossman <grossman@babylon-5.cygnus.com>
810 * Makefile.in (SIM_OBJS): Add sim-break.o.
811 * (INCLUDE_DEPS): Add tconfig.h.
812 * alu.h (MEM STORE): Change to sim_core_read/write_unaligned to
813 allow for trapping unaligned accesses.
814 * cpu.h: Define SIM_BREAKPOINT as syscall 5 for intrinsic breakpoint
816 * d30v-insn (short syscall): Use syscall 5 for breakpoint insn.
817 * sim-calls.c (sim_fetch_register sim_store_register): Implement.
818 * tconfig.in: Define SIM_HAVE_BREAKPOINTS to enable intrinsic
819 breakpoint mechanism.
821 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
823 * configure: Regenerated to track ../common/aclocal.m4 changes.
825 Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
827 * Makefile.in (SIM_WARNINGS, SIM_ALIGNMENT, SIM_ENDIAN,
828 SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common.
829 (SIM_EXTRA_CFLAGS): Update.
831 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
833 * configure.in: Specify strict alignment.
834 * configure: Regenerated to track ../common/aclocal.m4 changes.
836 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
838 * configure: Regenerated to track ../common/aclocal.m4 changes.
840 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
842 * configure: Regenerated to track ../common/aclocal.m4 changes.
844 Fri Sep 12 16:13:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
846 * sim-calls.c (sim_open): Change memory to
847 internal inst. RAM h'00000000-h'0000ffff (64KB)
848 internal data RAM h'20000000-h'20007fff (32KB)
849 external RAM h'80000000-h'803fffff (4MB)
850 EIT h'fffff000-h'ffffffff
853 Thu Sep 11 08:59:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
855 * Makefile.in (SIM_OBJS): Add sim-hrw.o module.
857 * sim-calls.c (sim_read): Delete. use sim-hrw.
858 (sim_write): Delete, use sim-hrw.
861 Tue Sep 9 01:36:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
863 * ic-d30v (imm_5): Update nr args passed to LSMASKED.
865 * d30v-insns (do_sat, do_sath, do_sath_p, do_satz, do_satzh): Fix,
866 computing the max sat value incorrectly.
868 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
870 * configure: Regenerated to track ../common/aclocal.m4 changes.
872 Fri Sep 5 09:15:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
874 * d30v-insns (do_mac, do_macs, do_msub, do_mulxs): Use explicit
875 type cast instead of SIGNED64 macro.
877 Thu Sep 4 10:28:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
879 * Makefile.in (SIM_OBJS): Include sim-memopt.o module.
881 * sim-calls.c (sim_open): Pass zero modulo arg to sim_core_attach
883 (sim_open): If no memory, use memory commands to establish d30v
885 (d30v_option_handler): Delete, replased by sim-memopt.c.
886 (sim_create_inferior): Call sim_module_init.
888 * sim-main.h (struct sim_state): Remove members eit_ram,
889 sizeof_eit_ram, external_ram, baseof_external_ram,
890 sizeof_external_ram. Using generic memory model instead.
892 Mon Sep 1 11:04:09 1997 Andrew Cagney <cagney@b1.cygnus.com>
894 * sim-calls.c (sim_open): Use sim_state_alloc.
896 Sat Aug 30 10:01:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
898 * sim-main.h (INVALID_INSTRUCTION_ADDRESS): Define.
900 * engine.c (do_2_short): Compare with INVALID_INSTRUCTION_ADDRESS
903 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
905 * configure: Regenerated to track ../common/aclocal.m4 changes.
908 Wed Aug 27 13:41:54 1997 Andrew Cagney <cagney@b1.cygnus.com>
910 * sim-calls.c (sim_open): Add call to sim_analyze_program, update
913 * sim-calls.c (sim_create_inferior): Add ABFD argument.
914 Initialize CPU registers including PC.
915 (sim_load): Delete, using sim-hload.
917 * Makefile.in (SIM_OBJS): Add sim-hload.o module.
919 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
921 * configure: Regenerated to track ../common/aclocal.m4 changes.
924 Mon Aug 25 15:41:44 1997 Andrew Cagney <cagney@b1.cygnus.com>
926 * sim-calls.c (sim_open): Add ABFD argument.
927 (sim_open): Move sim_config call to after sim_parse_args.
928 (sim_open): Check sim_config return status.
930 Fri Aug 22 16:38:59 1997 Andrew Cagney <cagney@b1.cygnus.com>
932 * d30v-insns (do_subh_ppp): Correct name, was do_sub_ppp.
933 (do_subh_ppp): Compute rc=rb-src instead of src-rb.
934 (do_addh_ppp): Ditto.
936 Fri Jun 27 14:43:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
938 * d30v-insns (mvfsys, mvtsys): Switch instruction encodings, was
939 wrong. Update handling of PSW[DS] bit.
940 (dbt): Fix debug trap address.
942 * cpu.h (NR_CONTROL_REGISTERS): Allow the full 64 registers.
944 Tue Jun 24 12:41:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
946 * d30v-insns (DBT, RTD): Swap the stack after updating the PSW.
947 (DBT): Use PSW_SET to update PSW.
949 * alu.h (ALU16_END): Check for 16 bit carry and not 32 bit.
951 Tue Jun 24 12:16:14 1997 Andrew Cagney <cagney@b2.cygnus.com>
953 * d30v-insns (ppp, ccc, pp, XX, p): Update format functions so
954 that they are of class %s instead of class function.
956 Tue Jun 10 12:26:39 1997 Andrew Cagney <cagney@b1.cygnus.com>
958 * sim-main.h (engine_error, engine_restart, engine_halt,
959 engine_run_until_stop): Delete prototypes. Functions deleted
961 (do_interrupt_handler): Add prototype.
962 (sim_state): Add pending_event member to struct.
964 * sim-calls.c (sim_open): Configure interrupt handler.
965 * engine.c (d30v_interrupt_event): New function. Deliver external
966 interrupt to processor.
968 * d30v-insns (do_stack_swap): Move function from here.
969 * engine.c (do_stack_swap): To here.
970 * sim-main.h (do_stack_swap): Add prototype.
972 * cpu.h (registers): Change current_sp to an int.
973 * d30v-insn (do_stack_swap): Update.
975 Thu Jun 5 12:54:35 1997 Andrew Cagney <cagney@b1.cygnus.com>
977 * d30v-insns (LD*, ST*): Disasemble XX == 0 as immed version of
979 (str_XXX): Fix case of XX == 3 - return "-".
981 Thu Jun 5 12:54:35 1997 Andrew Cagney <cagney@b1.cygnus.com>
983 * engine.c (sim_engine_run): Issuing L->R and R->L instructions in
986 * d30v-insn (CMPUcc imm long): With of RB field should be 6 not
988 (MUL, MUL2H, MULHX): X field 01 instead of 10.
990 Thu Jun 5 12:54:35 1997 Andrew Cagney <cagney@b1.cygnus.com>
992 * d30v-insns (mvtsys): Don't modify DS bit when writing to PSW.
993 (dbt, rtd): New instructions.
995 * cpu.h (NR_CONTROL_REGISTERS): Now 15.
996 (debug_program_status_word_cr, debug_program_counter_cr): Add
997 debug control registers. Renumber other control registers.
998 (PSW_DS): New PSW bit.
1001 Wed May 28 13:45:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
1003 * engine.c (sim_engine_run): Check the event queue on every cycle.
1005 * sim-calls.c (sim_size): Delete.
1006 (sim_do_command): Call sim_args_command.
1007 (sim_open): Move eit_ram and sizeof_eit_ram to sim_state struct.
1008 (simulation): Delete global now depend on sd argument.
1009 (sim_open): Initialize sim-watch.
1010 (d30v_option_handler): New function, parse mem-size argument.
1012 Tue May 27 14:03:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1014 * sim-calls.c (sim_set_callbacks): Delete.
1015 (sim_write): Pass NULL cpu arg to sim_core_write_buffer.
1017 * engine.c (engine_init): Delete. Handled in sim_open.
1018 (engine_create): Ditto.
1020 Tue May 20 10:15:35 1997 Andrew Cagney <cagney@b1.cygnus.com>
1022 * sim-calls.c (sim_open): Add callback argument.
1023 (sim_set_callbacks): Delete SIM_DESC argument.
1025 Mon May 19 14:59:32 1997 Andrew Cagney <cagney@b1.cygnus.com>
1027 * sim-calls.c (sim_open): Set the sim.base magic number.
1029 Fri May 16 15:25:59 1997 Andrew Cagney <cagney@b1.cygnus.com>
1031 * d30v-insns: Replace engine_error with common sim_engine_abort.
1032 * cpu.c (is_condition_ok, is_wrong_slot): Ditto.
1034 * engine.c (engine_run_until_stop): Rename this.
1035 (sim_engine_run): To this. Simplify - most moved to common.
1037 * sim-calls.c (sim_stop_reason, sim_resume, sim_stop):
1038 Delete. Replaced by common code.
1040 * engine.c (engine_error, engine_restart, engine_halt): Ditto.
1042 * sim-main.h (SIM_ENGINE_RESTART_HOOK, SIM_ENGINE_HALT_HOOK):
1045 Mon May 5 23:05:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
1047 * alu.h (IMEM, MEM, STORE): Update to reflect changes to core in
1049 * sim-calls.c (sim_open): Ditto.
1051 * alu.h, cpu.h, cpu.c, d30v-insn, dc-short: Clean up copyright
1054 Fri May 2 12:01:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1056 * sim-calls.c (sim-options.h, sim-utils.h): Include.
1057 * Makefile.in (sim-calls.o): Add dependencies.
1059 * d30v-insns (address_word): Remove cia argument from support
1060 functions, igen now does this automatically.
1062 * Makefile.in (tmp-igen): Include line number information in
1065 * sim-main.h (SIM_DESC): Remove sim_events and sim_core, moved to
1066 simulator base type sim_state_base.
1067 (sim-core.h, sim-events.h, sim-io.h): Replace with #include
1070 * sim-main.h (sim_state): Track recomendations in common
1072 * cpu.h (sim_cpu): Ditto.
1073 * engine.c (do_2_short, do_parallel): Ditto.
1074 * cpu.h (GPR): Ditto.
1075 * alu.h (MEM, IMEM, STORE): Ditto.
1076 * cpu.c (is_wrong_slot): Ditto.
1077 * ic-d30v (Aa, Ab): Ditto.
1079 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1081 * configure: Regenerated to track ../common/aclocal.m4 changes.
1082 * Makefile.in (SIM_OBJS): Add sim-module.o, sim-profile.o.
1083 * sim-calls.c (sim_open): Call sim_module_uninstall if argument
1084 parsing fails. Call sim_post_argv_init.
1085 (sim_close): Call sim_module_uninstall.
1087 Fri Apr 18 13:44:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1089 * sim-calls.c (sim_stop): New function.
1091 Thu Apr 17 02:57:55 1997 Doug Evans <dje@canuck.cygnus.com>
1093 * Makefile.in (SIM_OBJS): Add sim-load.o, sim-options.o, sim-trace.o.
1094 (SIM_EXTRA_{LIBS,LIBDEPS,ALL,INSTALL}): Delete.
1095 (SIM_RUN_OBJS): Change from run.o to nrun.o.
1096 * cpu.h (sim_cpu): New member base. Delete members trace, sd.
1097 (cpu_traces): Delete.
1098 * engine.c (engine_init): Set backlink from cpu to state.
1099 * sim-calls.c: #include bfd.h.
1100 (sim_open): Set STATE_OPEN_KIND. Call sim_pre_argv_init,
1102 (sim_load): Return SIM_RC. New arg abfd.
1103 Call sim_load_file to load file into simulator.
1104 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1105 (sim_trace): Delete.
1106 * sim-main.h (struct sim_state): sim_state_base is typedef now.
1107 (STATE_CPU): Define.
1109 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1111 * configure: Regenerated to track ../common/aclocal.m4 changes.
1114 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1116 * Makefile.in (SIM_EXTRA_DEPS): Define.
1117 (SIM_OBJS): Add sim-utils.o.
1118 (SIM_GEN): Delete tmp-common.
1119 (SIM_EXTRA_CLEAN): Delete clean-common.
1120 (BUILT_SRC_FROM_COMMON): Moved to ../common/Make-common.in.
1121 (tmp-common,clean-common): Delete.
1122 (ENGINE_H): sim-state.h renamed to sim-main.h.
1123 (clean-igen): Delete tmp-insns.
1125 * cpu.c: sim-state.h renamed to sim-main.h.
1126 * engine.c: Likewise.
1127 * sim-calls.c: Likewise.
1128 (zalloc,zfree): Moved to ../common/sim-utils.c.
1129 * sim-main.h: Renamed from sim-state.h.
1131 * sim-calls.c (sim_open): New arg `kind'.
1133 * configure: Regenerated to track ../common/aclocal.m4 changes.
1135 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1137 * configure: Regenerated to track ../common/aclocal.m4 changes.
1139 Wed Apr 2 11:13:15 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1141 * Makefile.in (SIM_OBJS): Link in the recently added sim-config.o
1143 * engine.c (current_target_byte_order, current_host_byte_order,
1144 current_environment, current_alignment, current_floating_point,
1145 current_model_issue, current_stdio): Delete, moved to
1146 ../common/sim-config.c
1148 Mon Mar 24 14:50:30 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1150 * d30v-insns (do_ldw): Load 4 bytes not 2.
1151 (do_incr, LD*, ST*): Increment register not its value.
1153 Mon Mar 24 09:59:53 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1155 * cpu.c (is_wrong_slot): Ditto.
1156 (is_condition_ok): Ditto.
1158 * sim-calls.c (sim_trace): Ditto.
1160 * engine.c (engine_init): Ditto.
1161 (do_2_short): Ditto.
1162 (engine_run_until_stop): Ditto.
1164 * d30v-insns (void): Update. For functions, remove `SIM_DESC sd'
1165 and `cpu *processor' arguments as igen now handles this.
1167 * cpu.h: Rename struct _cpu to struct _sim_cpu. Rename variable
1170 * sim-state.h: Update.
1172 Fri Mar 21 12:52:12 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1174 * d30v-insns (do_sat): Correct calculation of saturate lower
1177 (do_satzh, do_satz): Arguments should be signed.
1179 * sim-calls.c (zalloc): Use malloc() instead of xmalloc() for
1181 (filter_filename): Drop.
1183 * cpu.h (is_wrong_slot): Correct declaration name - was
1186 * engine.c (do_parallel): Plicate GCC.
1187 (engine_error): Ditto.
1188 (engine_run_until_stop): Ditto.
1189 * cpu.c (is_wrong_slot): Ditto.
1190 (is_condition_ok): Ditto.
1191 * sim-calls.c (sim_size): Ditto.
1195 * engine.h, engine.c (engine_create): Add missing prototype to
1196 header file. Clean up missing variables.
1198 * configure.in (unistd.h, string.h, strings.h): Configure in.
1199 * configure, config.in: Rebuild.
1201 Thu Mar 20 19:40:20 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1203 * d30v-insns (void): Provide a second emul instruction using a
1206 Tue Mar 18 20:51:42 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1208 * d30v-insn (do_sat*): Pass all necessary args.
1210 Tue Mar 18 18:49:10 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1212 * d30v-insns (SAT*): Issue warning when bit overflow.
1213 (EMUL): Exit with GPR[2] not 2.
1215 Tue Mar 18 14:24:09 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1217 * sim-state.h: New file rename engine.h.
1218 (sim_state): Rename engine strut to sim_state, rename events and
1222 * cpu.h, cpu.c: Ditto.
1224 * d30v-insns: Ditto.
1225 * sim-calls.c: Ditto.
1227 * Makefile.in (sim-*.c): Moved to ../common.
1229 Tue Mar 18 10:39:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1231 * d30v-insns (do_mac): Adding wrong register.
1236 * ic-d30v: Put back definitions of RaH, RaL, et.al.
1237 (do_sra2h, do_srah): Use.
1238 (do_srl2h, do_srlh): Use.
1240 * d30v-insns (SAT, SAT2H, SATp, SATZ): Implement saturate.
1242 Tue Mar 18 03:01:25 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1244 * d30v-insns: Specify wild insted of reserved bits.
1247 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1249 * configure: Re-generate.
1251 Mon Mar 17 14:35:37 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1253 * Makefile.in (SIM_EXTRA_CFLAGS), configure.in: Include SIM_*
1254 options. Allow RESERVED_BITS to be configured.
1255 * configure: Re-generate.
1257 * Makefile.in (sim-*.h): Drop, not needed.
1258 (sim-*.c): Make each explicit so that they automatically update.
1260 Sat Mar 15 02:34:30 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1262 * ic-d30v (imm long): Incorrect calculation.
1264 * d30v-insns (EMUL): Finish exit, write-string emul-call.
1266 * sim-calls.c (sim_trace): Have sim-trace enable basic instruction
1269 Sat Mar 15 02:10:31 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1271 * configure.in: Enable common options - endian, inline and
1273 * configure: Regenerate.
1275 Fri Mar 14 16:11:50 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1277 * Makefile.in (cpu.o): Update dependencies.
1278 * cpu.c (is_condition_ok): Update PSW bit manipulations.
1280 Fri Mar 14 12:49:20 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1282 * configure.in: Autoconfig m4
1283 * configure: Regenerate.
1285 * Makefile.in: Use m4 to preprocess d30v-insns.
1286 * d30v-insn: Adjust.
1288 Thu Mar 13 12:44:54 1997 Doug Evans <dje@canuck.cygnus.com>
1290 * sim-calls.c (sim_open): New SIM_DESC result. Argument is now
1292 (other sim_*): New SIM_DESC argument.
1294 Wed Mar 12 19:05:45 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1296 * sim-calls.c (sim_open): Create all the d30v RAM blocks.
1298 * engine.c (engine_run_until_stop): Handle delayed subroutine
1302 * ic-d30v: For Rb and Rc always return the value and not the
1306 * ic-d30v (val_Ra): Returns 0 or RA.
1309 * d30v-insn (make_even_reg, get_even_reg): New functions. Force
1310 the register index to be even, issusing a warning if it was not.
1313 Wed Mar 12 14:57:26 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1315 * d30v-insns (do_trap): Implement TRAP instruction.
1317 * alu.h (PSW_F, PSW_FLAG_VAL, PSW_FLAG_SET): New macro, map flag
1319 * ic-d30v: Drop F* expressions.
1320 * d30v-insn: Use more explicit PSW_FLAG_ ops.
1321 * cpu.h (PSW_*): Redo PSW bit values.
1322 * alu.h (ALU*_END): Update. Fix setting of overflow - logic was
1325 * d30v-insn (MVFSYS, MVTSYS): Implement.
1326 * cpu.h (PSWH, PSWL): New macros for high, low word of PSW.
1328 Wed Mar 12 14:12:11 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1330 * cpu.h (RPT_IS_CALL): New macro for processor field
1331 is_delayed_call. That in turn used as a flag to indicate if a
1332 delayed branch or delayed call is to occure.
1333 * d30v-insns (do_dbra): Set/clear RPT_IS_CALL;
1343 * d30v-insn (do_incr): Finish - handle modulo registers.
1345 * d30v-insns (CMPU): Include all possible compare
1346 operations. Issue a warning where op defined by the processor
1349 Wed Mar 12 13:55:55 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1351 * d30v-insns: Add a new instruction class _EMUL and a new
1352 instruction EMUL that emulates a few basic IO operations.
1354 * Makefile.in (tmp-igen): Filter in emul instructions.
1356 Fri Mar 7 20:32:13 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1358 * d30v-insns (void): Fill in the gaps.
1360 Wed Feb 26 09:31:10 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1362 * Makefile.in (tmp-igen): Include ic-d30v in dependencies.
1364 * ic-d30v (cache): Update to use H_word, L_word added to
1367 Tue Feb 25 15:26:51 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1369 * Makefile.in (tmp-igen): Correctly run $(MAKE).
1371 Thu Feb 20 20:30:31 1997 Andrew Cagney <cagney@critters.cygnus.com>
1373 * Makefile.in (FROM_IGEN, FROM_COMMON): Make the igen generated
1374 files dependant on tmp-igen. Define ENGINE_H.
1376 Sun Feb 16 16:42:48 1997 Andrew Cagney <cagney@critters.cygnus.com>
1378 * configure.in: New file - follow Doug Evans instructions.
1379 * Makefile.in: Ditto.