1 2015-03-28 Mike Frysinger <vapier@gentoo.org>
3 * erc32.c (mec_read): Delete parenthesis around return statement.
4 (mec_write, read_uart, rtc_counter_read, gpt_counter_read, memory_read,
5 memory_write, get_mem_ptr, sis_memory_write, sis_memory_read): Likewise.
6 * exec.c (sub_cc, add_cc, add32, dispatch_instruction, fpexec, chk_asi,
7 execute_trap, check_interrupts): Likewise.
8 * float.c (get_accex): Likewise.
9 * func.c (batch, limcalc, exec_cmd, disp_fpu, now, wait_for_irq,
10 check_bpt, bfd_load, get_time): Likewise.
11 * interf.c (run_sim, sim_write, sim_read): Likewise.
12 * sis.c (run_sim): Likewise.
14 2015-03-24 Mike Frysinger <vapier@gentoo.org>
16 * interf.c (sim_set_callbacks, sim_size, sim_trace): Delete.
18 2015-03-17 Jiri Gaisler <jiri@gaisler.se>
20 * func.c (exec_cmd): Silence compiler warnings when calling system().
21 (batch): Replace fgets() with getline().
23 2015-03-17 Jiri Gaisler <jiri@gaisler.se>
25 * func.c (show_stat): Print simulation time in portable long long
27 * help.c (usage): Update usage help print-out.
28 * sis.c (run_sim): Increase debug level with -v. Also print
29 simulation time in portable long long format.
30 * sis.h: Use stdint.h for portable 32- and 64-bit ints.
32 2015-03-16 Mike Frysinger <vapier@gentoo.org>
34 * config.in, configure: Regenerate.
36 2015-03-16 Jiri Gaisler <jiri@gaisler.se>
38 * Makefile.in (end, end.h): Remove target rules.
39 (clean): Remove end and end.h.
40 (erc32.o, exec.o, float.o, func.o, help.o, interf.o, sis.o): Delete
42 * configure, config.in: Regenerate.
43 * configure.ac: Use SIM_AC_OPTION_HOSTENDIAN
45 * erc32.c: Remove end.h include.
46 * exec.c: Remove end.h include. Use HOST_LITTLE_ENDIAN.
47 * func.c, sis.c: Likewise.
49 2015-03-14 Mike Frysinger <vapier@gentoo.org>
51 * Makefile.in (SIM_RUN_OBJS): Set to sis.o.
53 2015-03-14 Mike Frysinger <vapier@gentoo.org>
55 * configure.ac (AC_CHECK_HEADERS): Delete.
56 * aclocal.m4, configure: Regenerate.
58 2015-02-22 Jiri Gaisler <jiri@gaisler.se>
60 * Makefile.in: Add include path to readline.h.
61 sis.c: Remove locally define readline types.
63 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
65 * func.c (reset_stat, show_stat): Switch to double in time keeping.
66 (get_time): New function to get system time.
67 * interf.c (run_sim): Use get_time() for system time.
68 * sis.c (run_sim): Likewise.
71 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
73 * Makefile.in: Remove unused defines
75 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
77 * float.c (get_accex, clear_accex, set_fsr): Use functions from fenv.h
78 instead of custom assembly.
80 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
82 * erc32.c (mec_read): Allow simulator memory size to be read
84 (boot_init): initialize memory and timers if start address is
86 * func.c (exe_cmd): Call boot_init if start address not 0.
87 * interf.c (run_sim): Likewise.
89 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
91 * exec.c (init_regs): erc32 has vendor ID 1 and version ID 1 in %psr.
93 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
95 * func.c (print_insn_sparc_sis): Add helper function for disassembly.
96 (disp_ctrl): Use helper function.
98 2014-08-19 Alan Modra <amodra@gmail.com>
100 * configure: Regenerate.
102 2014-08-15 Roland McGrath <mcgrathr@google.com>
104 * configure: Regenerate.
105 * config.in: Regenerate.
107 2014-03-10 Mike Frysinger <vapier@gentoo.org>
109 * interf.c (sim_do_command): Add const to cmd.
111 2014-03-05 Mike Frysinger <vapier@gentoo.org>
113 * interf.c (sim_load): Add const to prog.
115 2013-10-09 Sergio Durigan Junior <sergiodj@redhat.com>
118 * float.c (set_fsr): Add missing "break" statements. Reindent
121 2013-09-23 Alan Modra <amodra@gmail.com>
123 * configure: Regenerate.
125 2013-06-03 Mike Frysinger <vapier@gentoo.org>
127 * aclocal.m4, configure: Regenerate.
129 2013-03-14 Joel Sherrill <joel.sherrill@oarcorp.com>
131 * Makefile.in: Include build directory in search path to find
134 2012-08-16 Nick Clifton <nickc@redhat.com>
136 * end.c: Include config.h before system header files.
142 * interf.c: Likewise.
144 2012-06-15 Joel Brobecker <brobecker@adacore.com>
146 * sys.h: Include "config.h".
148 2012-06-15 Joel Brobecker <brobecker@adacore.com>
150 * config.in, configure: Regenerate.
152 2012-05-24 Pedro Alves <palves@redhat.com>
156 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
158 2012-03-24 Mike Frysinger <vapier@gentoo.org>
160 * aclocal.m4, config.in, configure: Regenerate.
162 2011-12-31 Mike Frysinger <vapier@gentoo.org>
165 * configure.ac: Change AC_CHECK_LIB to AC_SEARCH_LIBS to match
166 the code in gdb's configure.ac with $TERMCAP.
167 * configure: Regenerated.
169 2011-12-03 Mike Frysinger <vapier@gentoo.org>
171 * aclocal.m4: New file.
172 * configure: Regenerate.
174 2011-10-17 Mike Frysinger <vapier@gentoo.org>
176 * configure.ac: Change include to common/acinclude.m4.
178 2011-10-17 Mike Frysinger <vapier@gentoo.org>
180 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
181 call. Replace common.m4 include with SIM_AC_COMMON.
182 * configure: Regenerate.
184 2011-06-09 Mike Frysinger <vapier@gentoo.org>
186 * interf.c (sim_open): Accept and ignore `--sysroot=...'.
188 2011-06-01 Joel Brobecker <brobecker@adacore.com>
190 * interf.c (sim_complete_command): New stub function.
192 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
194 * interf.c (sim_store_register): Update return value to
197 2010-05-20 Joel Brobecker <brobecker@adacore.com>
199 * sis.h: Remove #include <stdint.h>.
200 (uint64, int64): Redefine without using stdint.h.
201 (UINT64_MAX): Define.
203 2010-04-20 Tiemen Schut <T.Schut@sron.nl>
205 * erc32.c (sis_memory_write): Change prototype to const unsigned char *.
206 * func.c (exec_cmd, event, advance_time, wait_for_irq): Use uint64
208 * interf.c (run_sim): Change icount to uint64_t. Use strtol directly.
209 (sim_resume): Specify maximum run time as uint64.
210 * sis.c (run_sim): Change icount to uint64_t.
211 * sis.h: Define uint64 as uint64_t. Change various fields and
212 prototypes to uint64 to support longer simulations.
214 2010-04-14 Mike Frysinger <vapier@gentoo.org>
216 * interp.c (sim_write): Add const to buf arg.
218 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
220 * configure: Regenerate.
222 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
224 * config.in: Regenerate.
225 * configure: Likewise.
227 * configure: Regenerate.
229 2008-11-10 Joel Sherrill <joel.sherrill@oarcorp.com>
231 * erc32.c, exec.c: Fix warnings.
233 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
235 * configure: Regenerate to track ../common/common.m4 changes.
238 2008-06-09 Joel Sherrill <joel.sherrill@oarcorp.com>
240 * sis.c: Correct spelling error.
242 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
243 Daniel Jacobowitz <dan@codesourcery.com>
244 Joseph Myers <joseph@codesourcery.com>
246 * configure: Regenerate.
248 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
250 * acconfig.h: Remove.
251 * config.in: Regenerate.
253 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
255 * configure.ac: Add test for readline, substitute READLINE.
256 * Makefile.in (READLINE_LIB): New substituted-contents variable.
257 (SIM_EXTRA_LIBDEPS): Don't set.
258 (SIM_EXTRA_LIBS): Use $(READLINE_LIB) instead of
259 ../../readline/libreadline.a.
260 * configure: Regenerate.
262 2006-08-08 Daniel Jacobowitz <dan@codesourcery.com>
264 * Makefile.in (func.o, help.o): Correct dependencies.
266 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
268 * Makefile.in (install-sis): Honor DESTDIR.
270 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
272 * configure: Regenerated.
274 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
276 * configure: Regenerated.
278 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
280 * configure: Regenerated.
282 2005-11-28 Mark Mitchell <mark@codesourcery.com>
284 * interf.c: (gdb/signals.h): Include it.
285 (sim_stop_reason): Use TARGET_SIGNAL_*.
287 2005-07-08 Ben Elliston <bje@au.ibm.com>
289 * func.c: Remove ANSI_PROTOTYPES conditional code.
291 2005-03-23 Mark Kettenis <kettenis@gnu.org>
293 * configure: Regenerate.
295 2005-03-07 Jerome Guitton <guitton@gnat.com>
297 * sim/erc32/float.c (set_fsr): Do not use deprecated multi-line
299 (clear_accex): Ditto.
300 * sim/erc32/interf.c: Remove the redeclaration of fprintf.
301 * sim/erc32/sis.c: Ditto.
302 * sim/erc32/exec.c: Add missing semicolon.
303 * sim/erc32/func.c: Remove definitions of generic_print_address,
304 generic_symbol_at_address, buffer_read_memory and perror_memory, as
305 they are already defined in opcodes/dis-buf.c.
307 2005-01-14 Andrew Cagney <cagney@gnu.org>
309 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
310 explicit call to AC_CONFIG_HEADER.
311 * configure: Regenerate.
313 2005-01-12 Andrew Cagney <cagney@gnu.org>
315 * configure.ac: Update to use ../common/common.m4.
316 * configure: Re-generate.
318 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
320 * configure: Regenerated to track ../common/aclocal.m4 changes.
322 2005-01-07 Andrew Cagney <cagney@gnu.org>
324 * configure.ac: Rename configure.in, require autoconf 2.59.
325 * configure: Re-generate.
327 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
329 * configure: Regenerate for ../common/aclocal.m4 update.
331 2004-11-11 Andreas Schwab <schwab@suse.de>
333 * interf.c: Include "libiberty.h" instead of declaring buildargv
336 2003-02-27 Andrew Cagney <cagney@redhat.com>
338 * interf.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
340 2002-06-16 Andrew Cagney <ac131313@redhat.com>
342 * configure: Regenerated to track ../common/aclocal.m4 changes.
344 2002-06-08 Andrew Cagney <cagney@redhat.com>
346 * sis.h: Include "gdb/remote-sim.h" and "gdb/callback.h".
347 * interf.c: Include "gdb/remote-sim.h".
349 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
351 * configure: Regenerated to track ../common/aclocal.m4 changes.
353 2000-03-07 Frank Ch. Eigler <fche@redhat.com>
355 From John Dallaway <jld@redhat.co.uk>:
356 * Makefile.in (install-sis): Add $(EXEEXT) for Windows host.
358 2000-03-03 Jonathan Larmour <jlarmour@redhat.co.uk>
360 * func.c (buffer_read_memory): Change type of size to unsigned to
363 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
365 * configure: Regenerated to track ../common/aclocal.m4 changes.
367 1999-05-08 Felix Lee <flee@cygnus.com>
369 * configure: Regenerated to track ../common/aclocal.m4 changes.
371 1999-03-03 DJ Delorie <dj@cygnus.com>
373 * configure.in: add termcap and -luser32 for host=cygwin
374 * configure: regenerate
376 1999-02-11 Hugo Tyson <hmt@cygnus.co.uk>
378 * exec.c (dispatch_instruction):
379 Correct the sense of the
381 sregs->trap = TRAP_UNIMP;
384 clause that has been pasted around: it's correct in the SCAN and
385 DIVScc (divide step) cases (where it was probably originally
386 written?), but reversed in the SDIV, SDIVcc, UDIV, UDIVcc cases
387 ie. instructions only in the SPARC V8 or SPARClite 86x
388 architectures. It was also present when not required for SMUL,
389 SMULcc, UMUL, UMULcc instructions that are present in all
392 1999-01-25 Hugo Tyson <hmt@cygnus.co.uk>
394 * interf.c (run_sim): Fix a bug in the main loop's handling of
395 annulled delay slot instructions. There is precedent for this
396 change; the _other_ main loop in sis.c gets it right according to
397 my reading of the code.
399 The bug is: if an interrupt happens when the next instruction
400 (at sregs->pc) is annulled, the trap is taken (by execute_trap())
401 with the current values of PC and NPC, so when the trap returns,
402 the annulled instruction is indeed executed. Another giveaway is
403 that the annul flag is cleared in execute_trap(): the information
404 is demonstrably discarded.
406 The solution is: perform annulling before looking for traps, in
407 fact it's neater to do annulling, see if there's an interrupt and
408 if not, do the instruction, then handle traps be they generated by
409 interrupts pending or by the instruction we might just have done.
410 That's what the sis.c one does.
412 1999-01-20 Hugo Tyson <hmt@cygnus.co.uk>
414 * sis.h: Add asr17 register for support of SparcLITE (at least the
415 Hitachi ones I find before me)
417 * exec.c (dispatch_instruction): Case WRY: Allow write of asr17 if
418 sparclite. Other ASR numbers than 17 or 0 (Y) trap out.
419 Case RDY: Allow read of asr17 if sparclite. Other ASRs ditto.
420 (execute_trap): Do single-vector-trapping if asr17 bit 0 is set.
421 (init_regs): Initialize y and asr17.
422 NB: In instruction-set space, the Y register is asr0; the
423 instructions have different names for human reasons only.
426 * interf.c: Set boolean mode variable dumbio if invoked with
427 argument "-dumbio" and mention it of verbose.
428 * erc32.c: if "dumbio" is set, do not assume that there is a
429 terminal type device attached to stdin/stdout. Do not set
430 buffering or mess with tcsetattr or do any read operations in
431 order to make UART interrupts; not input data is supported.
432 This is necessary to allow the sim to be used within the eCos
433 testing infrastructure where stdin/stdout are pipes to a TCL
434 program; the sim hangs otherwise.
436 Thu Jul 23 07:17:03 1998 Mark Alexander <marka@cygnus.com>
438 * exec.c (dispatch_instruction): Add SPARClite 'scan' instruction.
440 Tue Jul 7 21:12:41 1998 Mark Alexander <marka@cygnus.com>
442 * func.c (bfd_load): Add special handling of a.out executables.
444 Sat Jun 13 08:33:25 1998 Mark Alexander <marka@cygnus.com>
446 * func.c (bfd_load): Print correct endianness.
447 * interf.c (run_sim): Print debugging information if verbosity level
449 (sim_open): Repeated -v options now increment verbosity level.
450 (sim_store_register): Handle little-endian case.
451 (flush_window): Print debugging information if verbosity level
454 Tue Jun 2 15:20:35 1998 Mark Alexander <marka@cygnus.com>
456 * interf.c (sim_open): Use revamped memory_read, which makes
457 byte-swapping unnecessary. Add -sparclite-board option for
458 emulating RAM found on typical SPARClite boards. Print
459 error message for unrecognized option.
460 * erc32.c: Change RAM address and size from constants to variables,
461 to allow emulation of SPARClite board RAM.
462 (fetch_bytes, store_bytes): New helper functions for revamped
463 mememory_read and memory_write.
464 (memory_read, memory_write): Rewrite to store bytes in target
465 byte order instead of storing words in host byte order; this
466 greatly simplifies support of little-endian programs.
467 (get_mem_ptr): Remove unnecessary byte parameter.
468 (sis_memory_write, sis_memory_read): Store words in target
469 byte order instead of host byte order.
470 (byte_swap_words): Remove, no longer needed.
471 * sis.h ((byte_swap_words): Remove declaration, no longer needed.
472 (memory_read): Add new sz parameter.
473 * sis.c (run_sim): Use revamped memory_read, which makes
474 byte-swapping unnecessary.
475 * exec.c (dispatch_instruction): Use revamped memory_read, which
476 makes byte-swapping and double-word fetching unnecessary.
477 * func.c (sparclite_board): Declare new variable.
478 (get_regi): Handle little-endian data.
479 (bfd_load): Recognize little-endian SPARClite as having
482 Fri May 22 14:23:16 1998 Mark Alexander <marka@cygnus.com>
484 * erc32.c (port_init): Print messages only if sis_verbose is true.
485 * func.c (bfd_load): Ditto.
486 * interf.c (sim_open): Ditto.
488 Thu May 14 23:10:48 1998 Mark Alexander <marka@cygnus.com>
490 * sis.h (uint64, int64): Define.
491 * exec.c (SDIV, SDIVCC, UDIV, UDIVCC): Define new opcodes.
492 * (mul64): Simplify calculation of negative result.
493 * (div64): New helper function for 64-bit division.
494 * (dispatch_instruction): Add emulation of SDIV, SDIVCC, UDIV,
497 Wed May 13 14:59:54 1998 Mark Alexander <marka@cygnus.com>
499 * erc32.c (close_port): Don't close stdin; it kills GDB.
500 (byte_swap_words): New function.
501 * sis.h: (byte_swap_words): Declare.
502 * interf.c (run_sim): Always fetch instructions as big-endian.
503 * sis.c (run_sim): Ditto.
505 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
507 * configure: Regenerated to track ../common/aclocal.m4 changes.
509 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
511 * configure: Regenerated to track ../common/aclocal.m4 changes.
514 Sun Apr 26 15:20:17 1998 Tom Tromey <tromey@cygnus.com>
516 * acconfig.h: New file.
517 * configure.in: Reverted change of Apr 24; use sinclude again.
519 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
521 * configure: Regenerated to track ../common/aclocal.m4 changes.
524 Fri Apr 24 11:19:52 1998 Tom Tromey <tromey@cygnus.com>
526 * configure.in: Don't call sinclude.
528 Sat Apr 18 12:00:16 1998 Mark Alexander <marka@cygnus.com>
530 * func.c (disp_fpu): Fix build problem on big-endian hosts.
532 Wed Apr 8 19:33:34 1998 Mark Alexander <marka@cygnus.com>
534 * erc32.c (sim_stop): Handle SIGINT gracefully.
535 * interf.c (sim_open): Don't catch SIGINT; GDB will do that for us.
537 Wed Apr 8 18:29:40 1998 Mark Alexander <marka@cygnus.com>
539 * exec.c (dispatch_instruction): Change how carry out is calculated
540 in DIVSCC. Add emulation of SMULCC, UMUL, and UMULCC.
542 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
544 * configure: Regenerated to track ../common/aclocal.m4 changes.
546 Wed Apr 1 21:19:18 1998 Mark Alexander <marka@cygnus.com>
548 * end.c: Update to version 2.7.5, fix compiler warnings and bugs.
558 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
560 * configure: Regenerated to track ../common/aclocal.m4 changes.
562 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
564 * configure: Regenerated to track ../common/aclocal.m4 changes.
566 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
568 * configure: Regenerated to track ../common/aclocal.m4 changes.
570 Tue Feb 17 12:41:11 1998 Andrew Cagney <cagney@b1.cygnus.com>
572 * interf.c (sim_store_register, sim_fetch_register): Pass in
573 length parameter. Return -1.
575 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
577 * configure: Regenerated to track ../common/aclocal.m4 changes.
579 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
581 * configure: Regenerated to track ../common/aclocal.m4 changes.
583 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
585 * configure: Regenerated to track ../common/aclocal.m4 changes.
587 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
589 * configure: Regenerated to track ../common/aclocal.m4 changes.
592 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
594 * configure: Regenerated to track ../common/aclocal.m4 changes.
596 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
598 * configure: Regenerated to track ../common/aclocal.m4 changes.
600 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
602 * configure: Regenerated to track ../common/aclocal.m4 changes.
604 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
606 * configure: Regenerated to track ../common/aclocal.m4 changes.
608 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
610 * configure: Regenerated to track ../common/aclocal.m4 changes.
612 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
614 * configure: Regenerated to track ../common/aclocal.m4 changes.
616 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
618 * configure: Regenerated to track ../common/aclocal.m4 changes.
620 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
622 * configure: Regenerated to track ../common/aclocal.m4 changes.
625 Tue Aug 26 10:38:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
627 * float.c (__setfpucw): Compile on any i386 target. Not just NT.
629 * interf.c (sim_kill): Delete.
630 (sim_create_inferior): Add ABFD argument. Initialize PC from ABFD
632 (sim_load): Don't save start address.
633 (start_address): Delete variable.
635 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
637 * configure: Regenerated to track ../common/aclocal.m4 changes.
640 Mon Aug 25 16:19:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
642 * interf.c (sim_open): Add ABFD argument. Change ARGV to PARGV.
644 Mon Jun 30 11:45:25 1997 Doug Evans <dje@canuck.cygnus.com>
646 * Makefile.in (install-sis): Change $(srcdir)/sis to sis.
648 Wed May 28 09:46:13 1997 Andrew Cagney <cagney@b1.cygnus.com>
650 * interf.c (sim_set_callbacks): Drop SD argument - not applicable.
651 (sim_open): Add callback arg, save it.
653 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
655 * configure: Regenerated to track ../common/aclocal.m4 changes.
657 Tue Apr 22 11:05:01 1997 Doug Evans <dje@canuck.cygnus.com>
659 * interf.c (sim_open): Undo patch to add -E support.
661 Thu Apr 17 03:03:56 1997 Doug Evans <dje@canuck.cygnus.com>
663 * interf.c (sim_open): Ignore -E arg.
664 (start_address): New static local.
665 (sim_load): Return SIM_RC. New arg abfd. Set start_address from bfd.
666 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
668 Tue Apr 15 15:16:11 1997 Ian Lance Taylor <ian@cygnus.com>
670 * Makefile.in (install-sis): Depend upon installdirs. Use
671 $(program_transform_name) directly, rather than using
674 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
676 * configure: Regenerated to track ../common/aclocal.m4 changes.
679 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
681 * interf.c (sim_open): New arg `kind'.
683 * configure: Regenerated to track ../common/aclocal.m4 changes.
685 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
687 * configure: Regenerated to track ../common/aclocal.m4 changes.
689 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
691 * configure: Re-generate.
693 Thu Mar 13 12:46:04 1997 Doug Evans <dje@canuck.cygnus.com>
695 * interf.c (sim_open): New SIM_DESC result. Argument is now in
697 (other sim_*): New SIM_DESC argument.
699 Tue Feb 4 13:35:20 1997 Doug Evans <dje@canuck.cygnus.com>
701 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
702 COMMON_{PRE,POST}_CONFIG_FRAG instead.
703 * configure.in: sinclude ../common/aclocal.m4.
704 * configure: Regenerated.
706 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
708 * configure configure.in Makefile.in: Update to new configure
709 scheme which is more compatible with WinGDB builds.
710 * configure.in: Improve comment on how to run autoconf.
711 * configure: Re-run autoconf to get new ../common/aclocal.m4.
712 * Makefile.in: Use autoconf substitution to install common
715 Wed Dec 4 18:25:04 1996 Rob Savoye <rob@chinadoll.cygnus.com>
717 * interf.c (run_sim): Stop the simulator and reset the stdio after
720 Tue Dec 3 11:54:37 1996 Rob Savoye <rob@chinadoll.cygnus.com>
722 * configure.in: Look for libtermcap.a.
723 * Makefile.in: Only link in -ltermcap if it exists.
724 * erc32.c: Update to version 2.6a. Fix uart handling.
725 * exec.c: Update to version 2.6a. Add sparclite support.
726 * float.c: Update to version 2.6a. Convert comments to
727 preprocessor warnings. Add __setfpucw() for i385 hosts so floating
728 point exceptions work on win32.
729 * func.c: Update to version 2.6a. Fix uart handling, add support
730 for user error traps.
731 * help.c: Update to version 2.6a. Add help note on user error
733 * interf.c: Update to version 2.6a. Fix uart handling, and add
735 * examples/gccx: Use sparclite cross compiler, not native gcc.
736 * examples/srt0.S: Use "mov" rather than "wr" for manipulating
739 Mon Nov 25 08:28:10 1996 Fred Fish <fnf@cygnus.com>
741 * Makefile.in (run.o): Remove this rule, it hides the one in
742 ../common/Make-common.in that correctly references the source
743 in the sibling ../common directory.
745 Wed Nov 20 01:30:12 1996 Doug Evans <dje@canuck.cygnus.com>
747 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
748 (SIM_{OBJS,EXTRA_LIBS,EXTRA_LIBDEPS,EXTRA_ALL,EXTRA_INSTALL}): Define.
749 (SIM_{EXTRA_CLEAN,EXTRA_CFLAGS}): Define.
750 * configure.in: Simplify using macros in ../common/aclocal.m4.
751 Call AC_CHECK_HEADERS(stdlib.h).
752 * configure: Regenerated.
753 * config.in: New file.
754 * func.c (sim_set_callbacks): Delete, moved to
755 * interf.c (sim_set_callbacks): here.
756 (sim_callback): New global.
757 Rewrite all calls to printf_filtered to go through callback.
758 (sim_size,sim_trace): New functions.
759 (sim_{insert,remove}_breakpoint): #if 0 out.
760 * sis.c: #include "config.h". #include <stdlib.h> if present.
761 (main): Coerce fprintf arg to INIT_DISASSEMBLE_INFO to fprintf_ftype.
762 * sis.h: #include "callback.h".
763 * run.c: Deleted, using one in ../common now.
765 Thu Oct 3 16:12:03 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
767 * Makefile.in (clean): Move config.log to distclean.
769 Wed Oct 2 16:57:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
771 * Makefile.in (clean): Also remove config.log.
773 Sat Sep 14 00:00:46 1996 Ian Lance Taylor <ian@cygnus.com>
775 * Makefile.in (CC_FOR_BUILD): New variable.
776 (AR, AR_FLAGS, BISON, MAKEINFO): Remove duplicate variables.
777 (RANLIB, CC): Likewise.
778 (end): Use $(CC_FOR_BUILD), not $(CC).
779 * configure.in: Set CC_FOR_BUILD.
780 * configure: Rebuild.
782 Sun Sep 8 14:04:37 1996 Stu Grossman (grossman@critters.cygnus.com)
784 * erc32.c (port_init): Disable this for __GO32__ (got no pty's
787 Mon Aug 12 17:04:58 1996 Stu Grossman (grossman@critters.cygnus.com)
789 * erc32.c: Don't include sys/ioctl.h or sys/file.h. They aren't
791 * (port_init): Don't even *try* to open pty's under _WIN32.
792 * Use SIM_ADDR, not caddr_t for declaring vars that hold addresses.
793 * float.c: Get rid of #warning. Makes Microsoft C barf.
794 * interf.c (sim_open): Cast fprintf to (fprintf_ftype) to fix
796 * (sim_load sim_create_inferior sim_read): Use prototypes only in
798 * Get rid of enum sim_stop. It's defined in remote-sim.h.
799 * (sim_stop_reason): Define SIGTRAP if _WIN32.
800 * sis.h: Include ansidecl.h and remote-sim.h.
802 Wed Jul 3 16:05:23 1996 Stu Grossman (grossman@critters.cygnus.com)
804 * erc32.c (mec_reset mec_read mec_write memory_read memory_write),
805 sis.h: Get rid of all uses of long long's.
806 * (close_port read_uart write_uart uarta_tx): Don't seg fault
807 when can't open pty's.
808 * exec.c: Add two new instructions: smul, and divscc.
809 * interf.c (flush_windows): New routine to flush the register
810 windows out to the stack just before returning to GDB. Makes
811 backtraces work much better.
813 Wed Jun 26 12:19:11 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
815 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
816 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
817 (docdir, oldincludedir): Removed.
818 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
819 (AC_PROG_INSTALL): Added.
820 * configure: Rebuilt.
822 Mon Jun 24 14:19:07 1996 Ian Lance Taylor <ian@cygnus.com>
824 * configure.in: Call AC_PROG_CC before running configure.host.
825 * configure: Rebuild with autoconf 2.10.
827 Tue Jun 4 10:37:12 1996 Tom Tromey <tromey@csk3.cygnus.com>
829 * Makefile.in (install): Don't check to see if tooldir exists.
830 Make $(tooldir) and $(tooldir)/bin.
832 Mon Jun 3 12:33:38 1996 Ian Lance Taylor <ian@cygnus.com>
834 * Makefile.in (end.h): Use explicit ./ when running end.
836 Sun May 19 21:05:31 1996 Rob Savoye <rob@chinadoll.cygnus.com>
838 * func.c(bfd_load): Don't try to print the filename if the pfbd is
840 * interf.c(sim_load): Pass the whole string, not just the first
846 * Fixed bug in "go" command.
851 * Fixed bug in interrupt force register (erc32.c).
853 * Change file load function to use bfd_openr.
855 * SIS should now be endian independent.
860 * Fixed FPU timing - some sequences of FPU instructions did not calculate
861 the resource dependencies right.
863 * Corrected STDFQ when qne = 0 (again!). The ftt is set to sequence_error
864 but no FPU trap is generated.
866 version 1.7.1 31-10-95
869 * Corrected STDFQ when qne = 0. Now, a trap is immidiately generated but
870 the FPU stays in execute mode.
872 * Corrected JMPL and RETT timing (these instructions takes two cycles).
878 * Interrupt during annuled instruction corrupted return address - fixed.
881 version 1.6.2 25-10-95
884 * Added -DFAST_UART to Makefile
887 version 1.6.1 24-10-95
890 * Fixed bug in STDFQ which caused bus error
896 * Modified srt0.s to include code that initiates registers in IU and FPU
897 and initializes the data segment. The simulator 'load' command does not
898 longer initialize the data segment!
900 * Corrected MEC timer operation; scalers now divide the frequency by
903 * MEC breakpoints are not checked during store operation
909 * Fixed some bugs in the cycle counting for IU & FPU instructions.
911 * Fixed bug that allowed an annuled instruction to cause memory exception.
913 * The *ws parameter in mem.c should now contain the number of waitstates
914 required by the memory access (was total number of cycles).
916 * The supplied srt0.s now clears the BSS (thanks Joel).
921 * Added a '-g' switch to enable/disable the GNU readline(), which cause
922 some problems on solaris 2.x machines.
924 * Enabled MEC watchpoint and breakpoint function to mem.c. Performance
927 NOTE: The UARTs are now connected to /dev/ttypc and /dev/ttypd.
932 * Fixed bug in mulscc instruction (how could that ever have worked?)
934 * Fixed bug in UART B (flushed characters on UART A), thanks Paul.
939 * Fixed bug in interrupt handling (wrong interrupt selected when more that
940 one interrupt pending)
942 * Fixed updating of condition codes during logical instructions (carry and
943 overflow were not reset)
945 * Fixed bug in WRTBR (tt field was wrongly over-written)
950 * Fixed several bugs in the interrupt handler and callback routines.
951 (reported by Paul Warren, Alsys)