1 2010-04-14 Mike Frysinger <vapier@gentoo.org>
3 * compile.c (sim_write): Add const to buffer arg.
5 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
7 * configure: Regenerate.
9 2009-12-09 Yoshinori Sato <ysato@users.sourceforge.jp>
10 * compile.c(fetch_1): Fix pre-dec, pre-inc, post-dec and post-inc.
11 Index registers not masked memory areas.
12 Only simply increment or decrement.
13 * compile.c(store_1): Ditto.
15 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
17 * config.in: Regenerate.
18 * configure: Likewise.
20 * configure: Regenerate.
22 2008-12-01 Joel Sherrill <joel.sherrill@oarcorp.com>
24 * compile.c: Add const to remove warning.
26 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
28 * configure: Regenerate to track ../common/common.m4 changes.
31 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
32 Daniel Jacobowitz <dan@codesourcery.com>
33 Joseph Myers <joseph@codesourcery.com>
35 * configure: Regenerate.
37 2007-07-03 Yoshinori Sato <ysato@users.sourceforge.jp>
39 * compile.c (sim_resume): Fix the last byte of ARGV for
42 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
45 * config.in: Regenerate.
47 2006-07-13 Yoshinori Sato <ysato@users.sourceforge.jp>
49 * compile.c (OBITOP): Bit address mask low three bit.
50 * compile.c (decode): Fix warning.
52 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
54 * configure: Regenerated.
56 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
58 * configure: Regenerated.
60 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
62 * configure: Regenerated.
64 2005-03-23 Mark Kettenis <kettenis@gnu.org>
66 * configure: Regenerate.
68 2005-01-14 Andrew Cagney <cagney@gnu.org>
70 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
71 explicit call to AC_CONFIG_HEADER.
72 * configure: Regenerate.
74 2005-01-12 Andrew Cagney <cagney@gnu.org>
76 * configure.ac: Update to use ../common/common.m4.
77 * configure: Re-generate.
79 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
81 * configure: Regenerated to track ../common/aclocal.m4 changes.
83 2005-01-07 Andrew Cagney <cagney@gnu.org>
85 * configure.ac: Rename configure.in, require autoconf 2.59.
86 * configure: Re-generate.
88 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
90 * configure: Regenerate for ../common/aclocal.m4 update.
92 2004-06-28 Alexandre Oliva <aoliva@redhat.com>
94 2003-07-23 Richard Sandiford <rsandifo@redhat.com>
95 * compile.c (sim_resume): Make sure that dst.reg refers to the
96 right register byte in mova/sz.l @(dd,RnL),ERn.
97 2003-07-21 Richard Sandiford <rsandifo@redhat.com>
98 * compile.c (sim_resume): Zero-extend immediate to muls, mulsu,
99 mulxs, divs and divxs.
101 * compile.c (sim_load): Update sd->memory_size.
103 2004-06-10 Michael Snyder <msnyder@redhat.com>
105 Patch submitted by Nitin Yewale <NitinY@KPITCummins.com>.
106 * compile.c (sim_resume): Corrected ANDC operation on EXR for H8S.
108 2004-01-05 Michael Snyder <msnyder@redhat.com>
110 * compile.c (sim_load): Don't pass a type to bfd_openr.
112 2003-12-16 Michael Snyder <msnyder@redhat.com>
114 Patch submitted by Anil Paranjape <AnilP1@KPITCummins.com>
115 * sim-main.h (H8300H_MSIZE): Increase from 18 bits to 24 bits.
117 2003-12-11 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
119 * compile.c (set_h8300h): Initialize globals to zero.
121 2003-10-17 Shrinivas Atre <shrinivasa@KPITCummins.com>
123 * compile.c (h8300_normal_mode): New.
124 (SP): Handle normal mode.
125 (bitfrom): Use normal mode flag to return suitable value.
126 (lvalue): Use normal mode flag to return command line location.
127 (decode): Decode instruction correctly for normal mode.
128 (init_pointers): Initialise memory correctly for normal mode.
129 (sim_resume): Handle cases for normal mode using h8300_normal_mode
131 (sim_store_register): Handle 2 byte PC for normal mode.
132 (sim_fetch_register): Handle 2 byte PC for normal mode.
133 (set_h8300h): Set normal mode flag as per architechture.
134 (sim_load): Allocate 64K for normal mode instead of bigger memory.
136 2003-07-18 Michael Snyder <msnyder@redhat.com>
138 * compile.c (decode): Enhancements for mova.
139 Initialize cst, reg, and rdisp inside the loop, for each
140 new instruction. Defer correction of the disp2 values until
141 later, and then adjust them by the size of the first operand,
142 rather than the size of the instruction.
143 (sim_resume): For mova, adjust the size of the second operand
144 according to the type of the first operand (INDEXB vs. INDEXW).
145 In cases where there is only one operand, the other two must
146 both be composed on the fly.
148 2003-07-22 Michael Snyder <msnyder@redhat.com>
150 * compile.c (sim_resume): Revert 6-24 change, it does not
151 work with gdb breakpoints.
153 2003-07-17 Michael Snyder <msnyder@redhat.com>
155 * compile.c (sim_resume): Handle shll reg, reg and shlr reg, reg.
156 (decode): IMM16 is always zero-extended.
158 2003-06-24 Michael Snyder <msnyder@redhat.com>
160 * sim-main.h (SIM_WIFSTOPPED, SIM_WSTOPSIG): Define.
161 * compile.c (sim_resume): Use the above to return stop signal.
163 2003-06-18 Michael Snyder <msnyder@redhat.com>
165 * compile.c: Replace "Hitachi" with "Renesas".
166 (decode): Distinguish AV_H8S from AV_H8H.
167 (sim_resume): H8SX can use any register for TAS.
168 (decode): Add support for VECIND.
169 (sim_resume): Implement rte/l and rts/l.
170 (GETSR): New macro (actually old macro reincarnated).
171 (decode): Add handling for IMM2.
172 (sim_resume): Drop extra block around jmp, jsr, rts.
173 Add handling for trapa and rte.
174 For divxu.b, change 0xffff mask to 0xff.
175 (set_h8300h): Add bfd_mach_h8300sxn machine.
177 2003-06-18 Corinna Vinschen <vinschen@redhat.com>
179 * sim-main.h (enum h8_regnum): Turn around order of MACH, MACL
182 2003-06-05 Michael Snyder <msnyder@redhat.com>
184 * compile.c (sim_fetch_register): Handle SBR, VBR, MACH, MACL.
185 (sim_store_register): Ditto.
187 2003-06-04 Michael Snyder <msnyder@redhat.com>
189 * compile.c (sim_info): Fix typo in output.
191 * compile.c (set_h8300h): Replace 'flag' arguments
192 with a bfd_machine argument, and decode it inline.
193 Check for bfd_mach_h8300hn and bfd_mach_h8300sn.
195 2003-06-03 Michael Snyder <msnyder@redhat.com>
197 * compile.c: Add h8300sx insns and addressing modes.
198 * sim-main.h: Replaces h8300/inst.h.
199 * Makefile.in: Tweak to bring in some sim/common stuff.
201 2003-04-13 Michael Snyder <msnyder@redhat.com>
203 * compile.c (sim_resume): Implement 'daa' and 'das' instructions.
205 2003-03-20 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
207 * compile.c (cmdline_location): Added function to
208 return the location of 8-bit (256 locations) where the
209 Command Line arguments would be stored.
210 (decode): Added a TRAP to 0xcc for Commandline
211 processing using pseudo opcode O_SYS_CMDLINE.
212 (sim_resume): Added handling of O_SYS_CMDLINE Trap.
213 (sim_create_inferior): Setting a pointer to
214 Commandline Args array.
215 * inst.h: Added a new variable ptr_command_line for
216 storing pointer to Commandline array.
218 2003-03-14 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
220 * compile.c (decode): Added code for some more magic traps.
221 * compile.c (sim_resume): Added support for File I/O system
222 calls through callback to host_system.
223 System calls provided support for :
224 open, read, write, lseek, close, stat, fstat
225 Only basic support for stat and fstat.
227 2003-02-27 Andrew Cagney <cagney@redhat.com>
229 * compile.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
231 2003-02-05 Kazu Hirata <kazu@cs.umass.edu>
233 * compile.c (init_pointers): Abort if wreg never gets initialized.
234 (sim_resume): Fix the handling of exts.w and extu.w.
236 2003-01-31 Kazu Hirata <kazu@cs.umass.edu>
238 * compile.c (sim_resume): Fix the handling of bxor.
240 2003-01-16 Michael Snyder <msnyder@redhat.com>
242 * compile.c: Change K&R function definitions to ISO.
243 (fetch): Make static, and eliminate unused parameter 'n'.
245 2002-12-26 Kazu Hirata <kazu@cs.umass.edu>
247 * compile.c: Fix formatting.
250 2002-07-29 Andrey Volkov <avolkov@transas.com>
252 * compile.c: Include "gdb/sim-h8300.h"
253 * Makefile.in: Add dependences on "inst.h",
254 "gdb/callback.h", "gdb/remote-sim.h" and "gdb/sim-h8300.h".
256 2002-06-16 Andrew Cagney <ac131313@redhat.com>
258 * configure: Regenerated to track ../common/aclocal.m4 changes.
260 2002-06-08 Andrew Cagney <cagney@redhat.com>
262 * compile.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
264 2002-05-19 Kazu Hirata <kazu@cs.umass.edu>
266 * compile.c: Fix formatting.
268 2002-05-18 Kazu Hirata <kazu@cs.umass.edu>
270 * compile.c: Fix formatting.
272 2002-05-17 Andrey Volkov (avolkov@transas.com)
274 * compile.c: Add absented opcodes: LDC, STC, EEPMOV, TAS.
276 2002-05-17 Andrey Volkov (avolkov@transas.com)
278 * compile.c: Add support of EXR register
281 2002-05-17 Andrey Volkov (avolkov@transas.com)
283 * compile.c: Made h8300s as new target, not h8300h alias.
286 2002-05-17 Andrey Volkov (avolkov@transas.com)
288 * compile.c: Add additional CCR flags (I,UI,H,U)
290 2002-05-17 Andrey Volkov (avolkov@transas.com)
292 * compile.c: Change literal regnumbers to REGNUMS.
293 Fix instruction and cycles counting
295 2001-12-20 Kazu Hirata <kazu@hxi.com>
297 * compile.c: Fix formatting.
299 2001-12-20 Kazu Hirata <kazu@hxi.com>
301 * compile.c: Fix comment typos.
303 2000-08-10 Kazu Hirata <kazu@hxi.com>
305 * compile.c (decode): Clean up the code.
307 2000-06-15 Kazu Hirata <kazu@hxi.com>
309 * compile.c (decode): Distinguish inc/dec.[wl] and adds/subs
312 2000-06-20 Frank Ch. Eigler <fche@redhat.com>
314 * compile.c: Don't include "wait.h".
315 (sim_resume): Use local SIM_WIFEXITED and SIM_WIFSIGNALED macros
316 instead of WIF* from host.
318 2000-06-13 Frank Ch. Eigler <fche@redhat.com>
320 * compile.c, writecode.c: Correct typo.
322 2000-06-13 Kazu Hirata <kazu@hxi.com>
324 * compile.c: Fix formatting.
326 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
328 * configure: Regenerated to track ../common/aclocal.m4 changes.
330 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
332 * configure: Regenerated to track ../common/aclocal.m4 changes.
334 1999-05-08 Felix Lee <flee@cygnus.com>
336 * configure: Regenerated to track ../common/aclocal.m4 changes.
338 1999-04-02 Keith Seitz <keiths@cygnus.com>
340 * compile.c (POLL_QUIT_INTERVAL): Define. Used to tweak the
341 frequency at which the poll_quit callback is used.
342 (sim_resume): Use POLL_QUIT_INTERVAL instead of hard-coded value.
344 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
346 * configure: Regenerated to track ../common/aclocal.m4 changes.
348 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
350 * configure: Regenerated to track ../common/aclocal.m4 changes.
353 Sun Apr 26 15:20:14 1998 Tom Tromey <tromey@cygnus.com>
355 * acconfig.h: New file.
356 * configure.in: Reverted change of Apr 24; use sinclude again.
358 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
360 * configure: Regenerated to track ../common/aclocal.m4 changes.
363 Fri Apr 24 11:19:46 1998 Tom Tromey <tromey@cygnus.com>
365 * configure.in: Don't call sinclude.
367 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
369 * configure: Regenerated to track ../common/aclocal.m4 changes.
371 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
373 * configure: Regenerated to track ../common/aclocal.m4 changes.
375 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
377 * configure: Regenerated to track ../common/aclocal.m4 changes.
379 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
381 * configure: Regenerated to track ../common/aclocal.m4 changes.
383 Tue Feb 17 12:42:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
385 * compile.c (sim_store_register, sim_fetch_register): Pass in
386 length parameter. Return -1.
388 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
390 * configure: Regenerated to track ../common/aclocal.m4 changes.
392 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
394 * configure: Regenerated to track ../common/aclocal.m4 changes.
396 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
398 * configure: Regenerated to track ../common/aclocal.m4 changes.
400 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
402 * configure: Regenerated to track ../common/aclocal.m4 changes.
405 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
407 * configure: Regenerated to track ../common/aclocal.m4 changes.
409 Tue Nov 11 16:52:07 1997 Angela Marie Thomas (angela@cygnus.com)
411 * compile.c: #include stdio.h for definition of NULL on
414 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
416 * compile.c (sim_load): Pass lma_p and sim_write args to
419 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
421 * configure: Regenerated to track ../common/aclocal.m4 changes.
423 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
425 * configure: Regenerated to track ../common/aclocal.m4 changes.
427 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
429 * configure: Regenerated to track ../common/aclocal.m4 changes.
431 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
433 * configure: Regenerated to track ../common/aclocal.m4 changes.
435 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
437 * configure: Regenerated to track ../common/aclocal.m4 changes.
439 Wed Sep 17 12:00:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
441 * Makefile.in (compile.o): Depend on config.h in local directory.
443 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
445 * configure: Regenerated to track ../common/aclocal.m4 changes.
447 Tue Sep 9 22:17:26 1997 Felix Lee <flee@cygnus.com>
449 * inst.h (sim_state): rename to h8300_sim_state, to avoid conflict
451 * configure.in: check for sys/param.h
452 * compile.c: #ifdef HAVE_SYS_PARAM_H.
453 #define SIGTRAP for wingdb.
454 (sim_resume): poll keyboard at least once per call.
455 (sim_resume): use host_callback instead of printf for syscall
458 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
460 * configure: Regenerated to track ../common/aclocal.m4 changes.
462 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
464 * configure: Regenerated to track ../common/aclocal.m4 changes.
467 Tue Aug 26 10:38:43 1997 Andrew Cagney <cagney@b1.cygnus.com>
469 * compile.c (sim_kill): Delete.
470 (sim_create_inferior): Add ABFD argument.
471 (sim_load): Move setting of PC from here.
472 (sim_create_inferior): To here.
473 (sim_open, sim_load, set_h8300h): Add fixme explaining why much of
474 the sim_load code should be moved to sim_open.
476 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
478 * configure: Regenerated to track ../common/aclocal.m4 changes.
481 Mon Aug 25 15:47:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
483 * compile.c (sim_open): Add ABFD argument.
485 Tue May 20 10:16:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
487 * compile.c (sim_open): Add callback argument.
488 (sim_set_callbacks): Delete SIM_DESC argument.
490 Wed Apr 30 10:22:29 1997 Doug Evans <dje@canuck.cygnus.com>
492 * compile.c (sim_load): Call bfd_get_mach instead of examining
494 * tconfig.in (SIM_PRE_LOAD): Delete, no longer used.
496 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
498 * configure: Regenerated to track ../common/aclocal.m4 changes.
500 Fri Apr 18 14:30:09 1997 Andrew Cagney <cagney@b1.cygnus.com>
502 * compile.c (sim_resume): Use poll_quit callback.
503 (sim_stop): New function.
505 Thu Apr 17 03:06:39 1997 Doug Evans <dje@canuck.cygnus.com>
507 * Makefile.in (SIM_OBJS): Add sim-load.o.
508 * compile.c (sim_kind, myname): New static locals.
509 (sim_open): Set sim_kind, myname.
510 (sim_load): Return SIM_RC. New arg abfd. Update test for h8300h.
511 Call sim_load_file to load file into simulator. Set start address
513 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
515 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
517 * configure: Regenerated to track ../common/aclocal.m4 changes.
520 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
522 * compile.c (sim_open): New arg `kind'.
524 * configure: Regenerated to track ../common/aclocal.m4 changes.
526 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
528 * configure: Regenerated to track ../common/aclocal.m4 changes.
530 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
532 * configure: Regenerated to track ../common/aclocal.m4 changes.
534 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
536 * configure: Re-generate.
538 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
540 * configure: Regenerate to track ../common/aclocal.m4 changes.
542 Thu Mar 13 12:48:05 1997 Doug Evans <dje@canuck.cygnus.com>
544 * compile.c (sim_open): New SIM_DESC result. Argument is now in
546 (other sim_*): New SIM_DESC argument.
548 Tue Feb 4 13:36:29 1997 Doug Evans <dje@canuck.cygnus.com>
550 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
551 COMMON_{PRE,POST}_CONFIG_FRAG instead.
552 * configure.in: sinclude ../common/aclocal.m4.
553 * configure: Regenerated.
555 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
557 * configure configure.in Makefile.in: Update to new configure
558 scheme which is more compatible with WinGDB builds.
559 * configure.in: Improve comment on how to run autoconf.
560 * configure: Re-run autoconf to get new ../common/aclocal.m4.
561 * Makefile.in: Use autoconf substitution to install common
564 Wed Nov 20 01:39:12 1996 Doug Evans <dje@canuck.cygnus.com>
566 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
568 * configure.in: Simplify using macros in ../common/aclocal.m4.
569 * configure: Regenerated.
570 * inst.h (enum sim_state): Define.
571 (cpu_state_type): New member `state'. Set it whenever `exception'
573 * compile.c (sim_callback): New global.
574 (sim_set_simcache_size): Renamed from sim_csize.
575 (sim_resume, case O_SLEEP): Add right way to decode r0 but #if 0 out
576 'cus it can't work. Change main loop exit test to use cpu.state.
577 (sim_trace): New function.
578 (sim_stop_reason): Add right way to set results, but #if 0 out.
579 (sim_size): New function.
580 (sim_info): Redirect calls to printf_filtered through callback.
581 (sim_set_callbacks): Record callback.
582 * run.c: Deleted, using one in ../common now.
583 * tconfig.in: New file.
585 Thu Oct 3 16:13:18 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
587 * Makefile.in (mostlyclean): Don't remove config.log here.
589 Fri Aug 9 22:59:11 1996 Jeffrey A Law (law@cygnus.com)
591 * compile.c (sim_resume): rts, sleep, bpt and nop have
592 no associated "size".
594 Tue Jul 9 22:15:39 1996 Jeffrey A Law (law@cygnus.com)
596 * compile.c (sim_resume): Fix all rotate-by-2-bits insns.
598 Tue Jul 2 23:08:45 1996 Jeffrey A Law (law@cygnus.com)
600 * run.c (main): Don't "load" sections which don't have
602 * compile.c (sim_resume, case "O_NOT"): Use ONOT instead
605 (sim_resume, shift/rotate cases): Add support for shift/rotate
607 (OSHIFTS): Corresponding changes.
609 Tue Jul 2 01:37:27 1996 Jeffrey A Law (law@cygnus.com)
611 * compile.c (sim_resume): Handle "ldm.l" and "stm.l".
613 Wed Jun 26 08:58:53 1996 Jeffrey A Law (law@cygnus.com)
615 * compile.c (h8300smode): Declare.
617 Wed Jun 26 12:20:56 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
619 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
620 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
622 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
623 (AC_PROG_INSTALL): Added.
624 * configure: Rebuilt.
626 Tue Jun 18 16:31:10 1996 Jeffrey A. Law <law@rtl.cygnus.com>
628 * compile.c (sim_load): Treat the H8/S like the H8/300H for now.
629 * run.c (main): Treat the H8/S like the H8/300H for now.
631 Fri May 24 10:35:25 1996 Jeffrey A Law (law@cygnus.com)
633 * compile.c (SEXTCHAR): Clear upper bits when sign
636 Wed May 22 22:23:37 1996 Jeffrey A Law (law@cygnus.com)
638 * compile.c (sim_resume): Correctly handle divu.
640 Tue May 7 02:13:05 1996 Jeffrey A Law (law@cygnus.com)
642 * compile.c (sim_resume): Never allow the PC to have an
645 Fri Apr 12 16:50:37 1996 Jeffrey A Law (law@cygnus.com)
647 * inst.h: Expand on comments regarding H8300H_MSIZE. Note
648 separate memory is allocate for the 8-bit area.
649 (struct cpu_state_type): Add new "eightbit' field.
650 * compile.c (GET_MEMORY_L): Handle access into the 8-bit
652 (GET_MEMORY_W, GET_MEMORY_B): Likewise.
653 (SET_MEMORY_L, SET_MEMORY_W, SET_MEMORY_B): Likewise.
654 (init_pointers): Initialize space for the 8-bit area.
655 (sim_write): Handle writing into the 8-bit area.
656 (sim_read): Handle reading from the 8-bit area.
657 (sim_load): Reallocate space for the 8-bit area.
659 * compile.c (sim_load): Re-allocate memory for the simulator
662 Fri Apr 12 09:39:56 1996 Jeffrey A Law (law@cygnus.com)
664 * compile.c (sim_resume): Fix and simplify overflow and carry
665 handling for 32bit ALU insns.
667 Mon Apr 8 23:58:49 1996 Jeffrey A Law (law@cygnus.com)
669 * compile.c (sim_resume): Fix overflow checks for ALU insns.
671 Fri Apr 5 17:20:59 1996 Jeffrey A Law (law@cygnus.com)
673 * compile.c (decode): Use "bit" to hold L_3 immediates instead
674 of holding them in "abs". Handle ABS8MEM memory references aka
675 8-bit area. Replace ABSMOV references with ABS8MEM.
677 Wed Mar 13 17:43:56 1996 Jeffrey A Law (law@cygnus.com)
679 * compile.c (fetch): Handle accesses to the exception/function
682 Mon Mar 11 09:53:25 1996 Doug Evans <dje@charmed.cygnus.com>
684 * compile.c: #include "wait.h".
685 (sim_resume, sleep insn): Check program exit status in r0.
686 (sim_resume, shift insns): Fix setting of overflow flag for shal.
687 * run.c: #include <signal.h>.
688 (main): Abort if program got SIGILL.
689 Print error message if argument is invalid.
690 (usage): Improve text.
692 Wed Feb 21 12:15:00 1996 Ian Lance Taylor <ian@cygnus.com>
694 * configure: Regenerate with autoconf 2.7.
696 Thu Jan 4 11:52:53 1996 Doug Evans <dje@canuck.cygnus.com>
698 * inst.h (MPOWER,MSIZE): Deleted.
699 (H8300{,H}_MSIZE): Define.
700 * compile.c (memory_size): New static global.
701 (init_pointers): Set memory size from one of H8300{,H}_MSIZE.
702 (sim_write,sim_read): Use memory_size.
704 Fri Oct 13 15:03:19 1995 steve chamberlain <sac@slash.cygnus.com>
706 * compile.c (sim_set_callbacks): New.
708 Tue Oct 10 11:11:26 1995 Fred Fish <fnf@cygnus.com>
710 * Makefile.in (BISON): Remove macro.
712 Wed Sep 20 13:35:02 1995 Ian Lance Taylor <ian@cygnus.com>
714 * Makefile.in (maintainer-clean): New synonym for realclean.
716 Fri Sep 8 12:18:53 1995 Ian Lance Taylor <ian@cygnus.com>
718 * Makefile.in (install): Don't install in $(tooldir).
720 * configure.in: Call AC_CONFIG_HEADER. Don't try to use
721 bfd/hosts/*.h file or bfd/config/*.mh file. Call AC_PROG_CC and
722 AC_PROG_RANLIB. Substitute in values for CFLAGS, HDEFINES and AR.
723 Call AC_CHECK_HEADERS for stdlib.h and time.h. Touch stamp.h if
725 * configure: Rebuild.
726 * config.in: New file, created by autoheader.
727 * Makefile.in (AR): Define as @AR@.
728 (CC): New variable, defined as @CC@.
729 (CFLAGS): Define as @CFLAGS@.
730 (RANLIB): Define as @RANLIB@.
731 (HDEFINES, TDEFINES): New variables.
732 (@host_makefile_frag@): Remove.
733 (compile.o, run.o): Depend upon config.h.
734 (mostlyclean): Make the same as clean, not distclean.
735 (clean): Remove config.log.
736 (distclean): Remove config.h and stamp-h.
737 (Makefile): Don't depend upon @frags@. Just rebuild Makefile when
738 invoking config.status.
739 (config.h, stamp-h): New targets.
740 * compile.c: Include "config.h". Don't include <sys/times.h>.
741 Include <time.h> and <stdlib.h> if they exist. Don't include
743 (get_now): Remove unused local b.
744 * run.c: Include "config.h". Include <stdlib.h> if it exists.
745 Don't include "sysdep.h".
746 * writecode.c: Don't include "bfd.h" or "sysdep.h". Include
749 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
751 * Update all FSF addresses except those in COPYING* files.
753 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
755 * Makefile.in (clean): Remove run.
756 (distclean): Remove Makefile.
760 * Makefile.in, configure.in: converted to autoconf.
761 * configure: New file, generated with autconf 2.4.
763 Fri Jun 30 16:50:24 1995 Stan Shebs <shebs@andros.cygnus.com>
765 * compile.c (sim_do_command): New function.
767 Tue Jun 20 16:18:13 1995 Steve Chamberlain <sac@slash.cygnus.com>
769 * compile.c (get_now): Don't do if win32.
770 (sim_resume): Poll in win32 too.
772 Wed May 24 16:31:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
774 * configure.in: Fix typo in last change.
776 Mon Mar 27 10:32:34 1995 J.T. Conklin <jtc@rtl.cygnus.com>
778 * run.c: parse arguments with getopt().
780 Tue Feb 28 17:30:08 1995 Ian Lance Taylor <ian@cygnus.com>
782 * configure.in: Use ../../bfd/hosts/std-host.h if specific
785 Sun Jan 22 12:35:43 1995 Steve Chamberlain <sac@splat>
787 * compile.c (sim_resume): Initialize cpu.mask.
789 Thu Sep 8 16:53:00 1994 Steve Chamberlain (sac@jonny.cygnus.com)
791 * inst.h (MPOWER): Bump simulated memory size to 2^18 bytes.
793 Wed May 18 13:47:58 1994 Doug Evans (dje@canuck.cygnus.com)
795 * compile.c: #include "bfd.h".
796 (sim_*): Set result type to void where there isn't one.
797 (sim_resume, default case): Set cpu.exception to SIGILL.
799 (sim_set_pc): Delete.
800 (sim_info): Delete printf_fn arg, all callers changed.
801 Call printf_filtered.
802 (set_h8300h): New arg `flag', all callers changed.
803 (sim_close): New function.
804 (sim_load): New function.
805 (sim_create_inferior): Renamed from sim_set_args, all callers changed.
806 * run.c: #include <varargs.h>, "remote-sim.h".
807 (printf_filtered): New function.
809 Fri May 13 18:32:27 1994 Doug Evans (dje@canuck.cygnus.com)
811 * compile.c (decode): Fix typo (16 bit branches).
812 (*): Some white space clean up.
814 Fri May 6 13:44:01 1994 Steve Chamberlain (sac@jonny.cygnus.com)
816 * compile.c (decode): Compile 16bit branches properly.
818 Sat Dec 11 16:32:36 1993 Steve Chamberlain (sac@thepub.cygnus.com)
820 * compile.c: Tidy up formatting. (sim_resume): Add orc, xorc,
821 andc. Poll for interrupts.
823 Thu Oct 28 19:29:34 1993 Doug Evans (dje@canuck.cygnus.com)
825 * compile.c: #include "ansidecl.h" for remote-sim.h.
827 Tue Oct 26 09:43:36 1993 Doug Evans (dje@canuck.cygnus.com)
829 * Makefile.in (CSEARCH): Add -I$(srcdir)/../../gdb
830 * compile.c: #include "remote-sim.h".
831 (sim_resume): New arg siggnal.
832 (sim_write): Use SIM_ADDR for type of arg addr.
833 Always return a value.
835 (sim_store_register): Result is type int.
836 (sim_fetch_register): Ditto.
837 (sim_stop_reason): Renamed from sim_stop_signal.
838 (sim_set_pc): Use SIM_ADDR for type of arg pc.
839 (sim_info): int result, new arg printf_fn.
840 (sim_kill): int result.
841 (sim_open): int result, new arg name.
842 * run.c (main): Use sim_set_pc to set pc.
843 Update call to sim_info.
845 Sat Oct 23 15:01:18 1993 Doug Evans (dje@canuck.cygnus.com)
847 * compile.c (sim_stop_signal): Result is now enum sim_stop.
849 Fri Oct 15 23:49:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
851 * compile.c (sim_kill, sim_open, sim_set_args): New functions.
853 Thu Oct 7 16:24:10 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
855 * compile.c (sim_set_pc): Write to the pc direcly.
856 (sim_store_register): Now value is passed by reference. (sim_read,
857 sim_write): Return number of bytes copied.
859 Tue Aug 17 07:16:15 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
861 * compile.c (mop): New function to do multiplies.
863 Fri Jul 16 13:53:53 1993 Doug Evans (dje@canuck.cygnus.com)
865 * compile.c (sim_resume): Add support for nop insn.
867 Thu Jul 15 09:59:01 1993 Doug Evans (dje@canuck.cygnus.com)
869 * compile.c: Reset HMODE back to zero (accidently set it to 1).
871 * run.c (main): If h8/300h binary detected, call set_h8300h.
872 * compile.c (sim_resume): Fix O_NEG insn.
874 Fri Jul 9 14:36:48 1993 Doug Evans (dje@canuck.cygnus.com)
876 * run.c (main): Add -h flag to enable h8/300h emulation.
877 * compile.c: Rename Hmode to HMODE (consistency with gdb).
878 (set_h8300h): New function.
879 (sim_resume): Add support for extu,exts insns.
880 (sim_resume): Fix logical right shifting.
881 (sim_resume, label alu32): Fix setting of carry flag.
883 Sun Jul 4 00:35:41 1993 Doug Evans (dje@canuck.cygnus.com)
885 * compile.c (sim_csize): Initialize cpu.cache.
887 Fri Jul 2 17:42:59 1993 Doug Evans (dje@canuck.cygnus.com)
889 * Makefile.in: Add -I../../bfd to pick up bfd.h.
891 Thu Jun 24 13:40:12 1993 Doug Evans (dje@canuck.cygnus.com)
893 * run.c (main): Fix parsing of args.
895 * compile.c (sim_resume): Fix shll insn.
897 Tue Jun 8 14:16:46 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
899 * compile.c: New file, supports H8/300H.
900 * p1,p3, gencode.c, state.h, writecode.c All dead and obsolete.
902 Tue Jun 1 11:14:59 1993 Steve Chamberlain (sac@thepub.cygnus.com)
904 * run.c (main): Add -v to print info.
905 * p3.c (sim_info): New function.
907 Mon Mar 15 15:48:31 1993 Ian Lance Taylor (ian@cygnus.com)
909 * h8300.mt (DO_INSTALL): Renamed from INSTALL.
911 Wed Mar 3 15:06:53 1993 Steve Chamberlain (sac@poseidon.cygnus.com)
913 * Makefile.in: Don't use cb or indent
914 * p1.c, state.h, writecode.c: lint
916 Mon Feb 1 16:44:58 1993 John Gilmore (gnu@cygnus.com)
918 * Makefile.in: Make SunOS halfdone VPATH work.
919 * p1.c: Lint picked up by HP native compiler.
921 Mon Jan 4 12:32:35 1993 Steve Chamberlain (sac@wahini.cygnus.com)
923 * p1.c (sim_resume): when running on dos, any character typed to
924 the keyboard will cause a simulated exception.
926 Sun Jan 3 14:15:07 1993 Steve Chamberlain (sac@thepub.cygnus.com)
928 * p1.c, p3.c, run.c, writecode.c: all used h8/300 opcodes in and
931 Tue Dec 22 13:56:48 1992 Steve Chamberlain (sac@thepub.cygnus.com)