sim: punt WITH_DEVICES & tconfig.h support
[deliverable/binutils-gdb.git] / sim / m32c / ChangeLog
1 2015-12-26 Mike Frysinger <vapier@gentoo.org>
2
3 * config.in, configure: Regenerate.
4
5 2015-11-09 Mike Frysinger <vapier@gentoo.org>
6
7 * Makefile.in (sample.x, sample.mot, sample2.x, sample2.o, gloss.o):
8 Delete targets.
9 * blinky.S: Moved to ../testsuite/sim/m32c/.
10 * gloss.S, sample.ld, sample.S, sample2.c: Likewise.
11
12 2015-11-09 Mike Frysinger <vapier@gentoo.org>
13
14 * Makefile.in: Delete redundant dependency info.
15
16 2015-08-05 Nick Clifton <nickc@redhat.com>
17
18 * gdb-if.c (sim_info): Stub function to allow GDB to be built
19 with this simulator.
20
21 2015-06-23 Mike Frysinger <vapier@gentoo.org>
22
23 * configure: Regenerate.
24
25 2015-06-12 Mike Frysinger <vapier@gentoo.org>
26
27 * configure: Regenerate.
28
29 2015-06-12 Mike Frysinger <vapier@gentoo.org>
30
31 * configure: Regenerate.
32
33 2015-04-13 Mike Frysinger <vapier@gentoo.org>
34
35 * configure: Regenerate.
36
37 2015-04-01 Mike Frysinger <vapier@gentoo.org>
38
39 * configure.ac: Call SIM_AC_OPTION_WARNINGS.
40 * configure: Regenerate.
41 * cpu.h (decode_opcode, decode_r8c, decode_m32c,
42 trace_register_changes): Convert old style prototypes.
43 (m32c_dump_all_registers): New prototype.
44 * gdb-if.c: Include stdlib.h.
45 (sim_info): Delete.
46 (siggnal, handle_step): Mark static.
47 (sim_resume): Move rc decl to top of scope.
48 * load.c: Include load.h.
49 (decode_opcode); Convert old style prototype.
50 (m32c_load): Move base decl to top of scope.
51 * load.h (m32c_set_mach): Change mach type to unsigned long.
52 * m32c.opc (getbyte, decode_m32c): Convert old style prototypes.
53 (prefix): Convert old style prototype and mark static.
54 * mem.c (mem_ptr, mem_usage_stats, e, mem_get_pc, stdin_ready,
55 m32c_sim_restore_console, update_timer_a): Convert old style
56 prototypes.
57 (mem_put_byte): Mark static.
58 * mem.h (mem_get_pc, m32c_sim_restore_console): Convert old style
59 prototypes.
60 * r8c.opc (getbyte, IMM, decode_r8c): Convert old style prototypes.
61 * reg.c (stack_heap_stats, trace_register_changes,
62 m32c_dump_all_registers): Convert old style prototypes.
63 (put_reg): Move b decl to top of scope.
64 * sample2.c (start): Convert old style prototype.
65 * srcdest.c (disp8, disp16, disp24, disp20): Convert old style
66 prototypes.
67 (decode_srcdest4, decode_jumpdest): Move sd init below decls.
68 * timer_a.h (update_timer_a): Convert old style prototype.
69 * trace.c: Include trace.h.
70 (load_file_and_line): Move file decl to top of scope.
71 (sim_disasm_one): Convert old style prototype.
72
73 2015-03-31 Mike Frysinger <vapier@gentoo.org>
74
75 * config.in, configure: Regenerate.
76
77 2015-03-16 Mike Frysinger <vapier@gentoo.org>
78
79 * aclocal.m4, config.in, configure: Regenerate.
80
81 2014-08-19 Alan Modra <amodra@gmail.com>
82
83 * configure: Regenerate.
84
85 2014-08-15 Roland McGrath <mcgrathr@google.com>
86
87 * configure: Regenerate.
88 * config.in: Regenerate.
89
90 2014-03-10 Mike Frysinger <vapier@gentoo.org>
91
92 * gdb-if.c (sim_do_command): Add const to cmd. Move args
93 to top and add const. Call strdup on cmd and free at end.
94
95 2014-03-05 Mike Frysinger <vapier@gentoo.org>
96
97 * gdb-if.c (sim_load): Add const to prog.
98
99 2013-09-23 Alan Modra <amodra@gmail.com>
100
101 * configure: Regenerate.
102
103 2013-06-03 Mike Frysinger <vapier@gentoo.org>
104
105 * aclocal.m4, configure: Regenerate.
106
107 2012-06-15 Joel Brobecker <brobecker@adacore.com>
108
109 * config.in, configure: Regenerate.
110
111 2012-05-24 Pedro Alves <palves@redhat.com>
112
113 PR gdb/7205
114
115 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
116
117 2012-05-18 Nick Clifton <nickc@redhat.com>
118
119 PR 14072
120 * gdb-if.c: Include config.h before system header files.
121 * load.c: Likewise.
122 * syscalls.c: Likewise.
123 * trace.c: Likewise.
124
125 2012-03-24 Mike Frysinger <vapier@gentoo.org>
126
127 * aclocal.m4, config.in, configure: Regenerate.
128
129 2012-01-02 Joel Brobecker <brobecker@adacore.com>
130
131 * blinky.S, gloss.S, sample.S: Reformat copyright header.
132
133 2011-12-03 Mike Frysinger <vapier@gentoo.org>
134
135 * aclocal.m4: New file.
136 * configure: Regenerate.
137
138 2011-10-17 Mike Frysinger <vapier@gentoo.org>
139
140 * configure.ac: Change include to common/acinclude.m4.
141
142 2011-10-17 Mike Frysinger <vapier@gentoo.org>
143
144 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
145 call. Replace common.m4 include with SIM_AC_COMMON.
146 * configure: Regenerate.
147
148 2011-07-11 Mike Frysinger <vapier@gentoo.org>
149
150 * configure.ac: Rename from configure.in.
151
152 2011-07-11 Mike Frysinger <vapier@gentoo.org>
153
154 * configure.in: Add "dnl" before copyright notice.
155
156 2011-04-16 Mike Frysinger <vapier@gentoo.org>
157
158 * gdb-if.c (sim_complete_command): New stub function.
159
160 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
161
162 * gdb-if.c (sim_store_register): Update return value to
163 match new API.
164
165 2010-12-04 Masaki Muranaka <monaka@monami-software.com>
166
167 * Makefile.in: Use CC_FOR_BUILD to build opc2c.
168
169 2010-05-26 Ozkan Sezer <sezeroz@gmail.com>
170
171 * main.c (setup_tcp_console): Check error return from socket() call
172 by its equality to -1 not by it being negative.
173
174 2010-04-14 Mike Frysinger <vapier@gentoo.org>
175
176 * gdb-if.c (sim_write): Add const to buf arg.
177 * mem.h (mem_put_blk): Add const to bufptr arg.
178 * mem.c (mem_put_blk): Likewise, and add const to cast.
179
180 2010-01-20 DJ Delorie <dj@redhat.com>
181
182 * m32c.opc (MATH_OP): When doing subtraction, also set carry if
183 the result is zero.
184
185 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
186
187 * configure: Regenerate.
188
189 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
190
191 * config.in: Regenerate.
192 * configure: Likewise.
193
194 * configure: Regenerate.
195
196 2009-08-14 DJ Delorie <dj@redhat.com>
197
198 * configure.in: Check for sys/select.h, termios.h, sys/socket.h,
199 netinet/in.h, and netinet/tcp.h.
200 * configure: Regenerate.
201 * config.in: Add those headers.
202 * main.c: Check for them.
203 (setup_tcp_console): Disable if no networking.
204 (main): Note missing networking or termios.
205 * mem.c: Check for those headers.
206 (stdin_ready): Disable if no termios.
207 (m32c_sim_restore_console): Disable if no termios.
208 (mem_get_byte): Disable console input if no termios.
209
210 2009-01-06 Joel Sherrill <joel.sherrill@oarcorp.com>
211
212 * r8c.opc, m32c.opc: Add parentheses to remove warnings.
213
214 2008-10-01 DJ Delorie <dj@redhat.com>
215
216 * int.c (trigger_peripheral_interrupt): Clear interrupt pending
217 bit when peripheral interrupts are serviced.
218
219 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
220
221 * configure: Regenerate to track ../common/common.m4 changes.
222 * config.in: Ditto.
223
224 2008-06-16 DJ Delorie <dj@redhat.com>
225
226 * m32c.opc (BRK, GDBBRK): Remove debug logic.
227 * main.c (main): Add option to set raw console.
228 * mem.h (m32c_use_raw_console): Declare.
229 * mem.c (m32c_sim_restore_console): Only restore console if it's
230 been previously set.
231 (m32c_use_raw_console): Define.
232 (mem_get_byte): Set raw console if m32c_use_raw_console is set.
233
234 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
235 Daniel Jacobowitz <dan@codesourcery.com>
236 Joseph Myers <joseph@codesourcery.com>
237
238 * configure: Regenerate.
239
240 2008-06-06 DJ Delorie <dj@redhat.com>
241
242 * Makefile.in: Add Timer A support.
243 * cpu.h (m32c_opcode_pc): New.
244 (in_gdb): New.
245 * gdb-if.c (sim_open): Add Timer A support. Support unbuffered
246 console.
247 * int.c (trigger_interrupt): Manage the U flag properly.
248 (trigger_based_interrupt): Likewise.
249 (trigger_fixed_interrupt): New.
250 (trigger_peripheral_interrupt): New.
251 * int.h (trigger_peripheral_interrupt): New.
252 * m32c.opc: Use m32c_opcode_pc throughout, as needed.
253 (decode_m32c): Detect jump-to-zero with traceback.
254 (BRK): Try to do the right thing, keeping track of whether we're
255 in gdb or not, and if the user has provided a handler or not.
256 (GBRK): Alternate break opcode for gdb, in case the user's app
257 needs to use BRK for itself.
258 (BRK2): Implement.
259 * main.c: Add Timer A support. Support TCP-based console.
260 (setup_tcp_console): New.
261 (main): Add Timer A support. Support TCP-based console.
262 * mem.h (m32c_sim_restore_console): New.
263 * mem.c: Add Timer A support. Support TCP-based console.
264 (mem_ptr): Enhance NULL pointer detection.
265 (stdin_ready): New.
266 (m32c_sim_restore_console): New.
267 (mem_get_byte): Check for console input ready.
268 (update_timer_a): New.
269 * r8c.opc (SSTR): Use r0l, not r0h.
270 (REIT): Fix return frame logic.
271 * reg.c (print_flags): New.
272 (trace_register_changes): Use it.
273 (m32c_dump_all_registers): New.
274 * timer_a.h: New.
275
276 * load.c: Fix indentation.
277 * trace.c: Fix indentation.
278 * trace.h: Fix indentation.
279
280 2006-06-26 DJ Delorie <dj@redhat.com>
281
282 * r8c.opc (decode_r8c): Don't bother reading the destination
283 before moving a constant into it. Fix borrow comparison for SUB.
284
285 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
286
287 * configure: Regenerated.
288
289 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
290
291 * configure: Regenerated.
292
293 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
294
295 * configure: Regenerated.
296
297 2006-03-13 DJ Delorie <dj@redhat.com>
298
299 * mem.c (mem_put_byte): Hook simulated UART to stdout.
300 (mem_put_hi): Hook in simulated trace port.
301 (mem_get_byte): Hook in simulated uart control port.
302 * opc2c: Be more picky about matching special comments.
303 * r8c.opc (shift_op): Limit shift counts to -16..16.
304 (BMcnd): Map conditional codes.
305 * reg.c (condition_true): Mask condition code to 4 bits.
306 * syscalls.c: Include local syscall.h.
307 * syscall.h: New, copied from libgloss.
308
309 2005-10-06 Jim Blandy <jimb@redhat.com>
310
311 Simulator for Renesas M32C and M16C, by DJ Delorie <dj@redhat.com>,
312 with further work from Jim Blandy <jimb@redhat.com> and
313 Kevin Buettner <kevinb@redhat.com>.
314
315 * ChangeLog: New.
316 * Makefile.in: New.
317 * blinky.S: New.
318 * config.in: New.
319 * configure: New.
320 * configure.in: New.
321 * cpu.h: New.
322 * gdb-if.c: New.
323 * gloss.S: New.
324 * int.c: New.
325 * int.h: New.
326 * load.c: New.
327 * load.h: New.
328 * m32c.opc: New.
329 * main.c: New.
330 * mem.c: New.
331 * mem.h: New.
332 * misc.c: New.
333 * misc.h: New.
334 * opc2c.c: New.
335 * r8c.opc: New.
336 * reg.c: New.
337 * safe-fgets.c: New.
338 * safe-fgets.h: New.
339 * sample.S: New.
340 * sample.ld: New.
341 * sample2.c: New.
342 * srcdest.c: New.
343 * syscalls.c: New.
344 * syscalls.h: New.
345 * trace.c: New.
346 * trace.h: New.
347
348
This page took 0.035986 seconds and 5 git commands to generate.