1 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
3 * configure: Regenerated to track ../common/aclocal.m4 changes.
6 Wed Aug 27 14:12:27 1997 Andrew Cagney <cagney@b1.cygnus.com>
8 * interp.c (sim_open): Add call to sim_analyze_program, update
11 Tue Aug 26 10:40:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
13 * interp.c (sim_kill): Delete.
14 (sim_create_inferior): Add ABFD argument. Set PC from same.
15 (sim_load): Move code initializing trap handlers from here.
17 (sim_load): Delete, use sim-hload.c.
19 * Makefile.in (SIM_OBJS): Add sim-hload.o module.
21 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
23 * configure: Regenerated to track ../common/aclocal.m4 changes.
26 Mon Aug 25 15:59:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
28 * interp.c (sim_open): Add ABFD argument.
29 (sim_load): Move call to sim_config from here.
30 (sim_open): To here. Check return status.
33 * gencode.c (build_instruction): Do not define x8000000000000000,
34 x7FFFFFFFFFFFFFFF, or xFFFFFFFF80000000.
38 Mon Jul 28 19:49:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
40 * gencode.c (build_instruction): For "pdivw", "pdivbw" and
41 "pdivuw" check for overflow due to signed divide by -1.
44 Fri Jul 25 15:00:45 1997 Gavin Koch <gavin@cygnus.com>
46 * gencode.c (build_instruction): Two arg MADD should
47 not assign result to $0.
50 Thu Jul 10 11:58:48 1997 Andrew Cagney <cagney@critters.cygnus.com>
52 * gencode.c (build_instruction): For "ppac5" use unsigned
53 arrithmetic so that the sign bit doesn't smear when right shifted.
54 (build_instruction): For "pdiv" perform sign extension when
55 storing results in HI and LO.
56 (build_instructions): For "pdiv" and "pdivbw" check for
58 (build_instruction): For "pmfhl.slw" update hi part of dest
59 register as well as low part.
60 (build_instruction): For "pmfhl" portably handle long long values.
61 (build_instruction): For "pmfhl.sh" correctly negative values.
62 Store half words 2 and three in the correct place.
63 (build_instruction): For "psllvw", sign extend value after shift.
66 Thu Jun 26 12:13:17 1997 Angela Marie Thomas (angela@cygnus.com)
68 * sim/mips/configure: Change default_sim_endian to 0 (bi-endian)
69 * sim/mips/configure.in: Regenerate.
71 Wed Jul 9 10:29:21 1997 Andrew Cagney <cagney@critters.cygnus.com>
73 * interp.c (SUB_REG_UW, SUB_REG_SW, SUB_REG_*): Use more explicit
74 signed8, unsigned8 et.al. types.
77 * gencode.c (build_instruction): For PMULTU* do not sign extend
78 registers. Make generated code easier to debug.
81 * interp.c (SUB_REG_FETCH): Handle both little and big endian
82 hosts when selecting subreg.
85 Tue Jul 8 18:07:20 1997 Andrew Cagney <cagney@andros.cygnus.com>
87 * gencode.c (type_for_data_len): For 32bit operations concerned
88 with overflow, perform op using 64bits.
89 (build_instruction): For PADD, always compute operation using type
90 returned by type_for_data_len.
91 (build_instruction): For PSUBU, when overflow, saturate to zero as
95 Wed Jul 2 11:54:10 1997 Jeffrey A Law (law@cygnus.com)
98 * gencode.c (build_instruction): Handle "pext5" according to
99 version 1.95 of the r5900 ISA.
101 * gencode.c (build_instruction): Handle "ppac5" according to
102 version 1.95 of the r5900 ISA.
105 * interp.c (sim_engine_run): Reset the ZERO register to zero
106 regardless of FEATURE_WARN_ZERO.
107 * gencode.c (FEATURE_WARNINGS): Remove FEATURE_WARN_ZERO.
109 Wed Jun 4 10:43:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
111 * interp.c (decode_coproc): Implement MTC0 N, CAUSE.
112 (SignalException): For BreakPoints ignore any mode bits and just
114 (SignalException): Always set the CAUSE register.
116 Tue Jun 3 05:00:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
118 * interp.c (SignalException): Clear the simDELAYSLOT flag when an
119 exception has been taken.
121 * interp.c: Implement the ERET and mt/f sr instructions.
124 Mon Jun 2 23:28:19 1997 Andrew Cagney <cagney@b1.cygnus.com>
126 * gencode.c (build_instruction): For paddu, extract unsigned
129 * gencode.c (build_instruction): Saturate padds instead of padd
133 Sat May 31 00:44:16 1997 Andrew Cagney <cagney@b1.cygnus.com>
135 * interp.c (SignalException): Don't bother restarting an
138 Fri May 30 23:41:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
140 * interp.c (SignalException): Really take an interrupt.
141 (interrupt_event): Only deliver interrupts when enabled.
143 Tue May 27 20:08:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
145 * interp.c (sim_info): Only print info when verbose.
146 (sim_info) Use sim_io_printf for output.
148 Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
150 * interp.c (CoProcPresent): Add UNUSED attribute - not used by all
153 Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
155 * interp.c (sim_do_command): Check for common commands if a
156 simulator specific command fails.
158 Thu May 22 09:32:03 1997 Gavin Koch <gavin@cygnus.com>
160 * interp.c (sim_engine_run): ifdef out uses of simSTOP, simSTEP
161 and simBE when DEBUG is defined.
163 Wed May 21 09:08:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
165 * interp.c (interrupt_event): New function. Pass exception event
166 onto exception handler.
168 * configure.in: Check for stdlib.h.
169 * configure: Regenerate.
171 * gencode.c (build_instruction): Add UNUSED attribute to tempS
172 variable declaration.
173 (build_instruction): Initialize memval1.
174 (build_instruction): Add UNUSED attribute to byte, bigend,
176 (build_operands): Ditto.
178 * interp.c: Fix GCC warnings.
179 (sim_get_quit_code): Delete.
181 * configure.in: Add INLINE, ENDIAN, HOSTENDIAN and WARNINGS.
182 * Makefile.in: Ditto.
183 * configure: Re-generate.
185 * Makefile.in (SIM_OBJS): Add sim-watch.o module.
187 Tue May 20 15:08:56 1997 Andrew Cagney <cagney@b1.cygnus.com>
189 * interp.c (mips_option_handler): New function parse argumes using
191 (myname): Replace with STATE_MY_NAME.
192 (sim_open): Delete check for host endianness - performed by
194 (simHOSTBE, simBE): Delete, replaced by sim-endian flags.
195 (sim_open): Move much of the initialization from here.
196 (sim_load): To here. After the image has been loaded and
198 (sim_open): Move ColdReset from here.
199 (sim_create_inferior): To here.
200 (sim_open): Make FP check less dependant on host endianness.
202 * Makefile.in (SIM_RUN_OBJS): Set to nrun.o - use new version or
204 * interp.c (sim_set_callbacks): Delete.
206 * interp.c (membank, membank_base, membank_size): Replace with
207 STATE_MEMORY, STATE_MEM_SIZE, STATE_MEM_BASE.
208 (sim_open): Remove call to callback->init. gdb/run do this.
212 * sim-main.h (SIM_HAVE_FLATMEM): Define.
214 * interp.c (big_endian_p): Delete, replaced by
215 current_target_byte_order.
217 Tue May 20 13:55:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
219 * interp.c (host_read_long, host_read_word, host_swap_word,
220 host_swap_long): Delete. Using common sim-endian.
221 (sim_fetch_register, sim_store_register): Use H2T.
222 (pipeline_ticks): Delete. Handled by sim-events.
224 (sim_engine_run): Update.
226 Tue May 20 13:42:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
228 * interp.c (sim_stop_reason): Move code determining simEXCEPTION
230 (SignalException): To here. Signal using sim_engine_halt.
231 (sim_stop_reason): Delete, moved to common.
233 Tue May 20 10:19:48 1997 Andrew Cagney <cagney@b2.cygnus.com>
235 * interp.c (sim_open): Add callback argument.
236 (sim_set_callbacks): Delete SIM_DESC argument.
239 Mon May 19 18:20:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
241 * Makefile.in (SIM_OBJS): Add common modules.
243 * interp.c (sim_set_callbacks): Also set SD callback.
244 (set_endianness, xfer_*, swap_*): Delete.
245 (host_read_word, host_read_long, host_swap_word, host_swap_long):
246 Change to functions using sim-endian macros.
247 (control_c, sim_stop): Delete, use common version.
248 (simulate): Convert into.
249 (sim_engine_run): This function.
250 (sim_resume): Delete.
252 * interp.c (simulation): New variable - the simulator object.
253 (sim_kind): Delete global - merged into simulation.
254 (sim_load): Cleanup. Move PC assignment from here.
255 (sim_create_inferior): To here.
257 * sim-main.h: New file.
258 * interp.c (sim-main.h): Include.
260 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
262 * configure: Regenerated to track ../common/aclocal.m4 changes.
264 Wed Apr 23 17:32:19 1997 Doug Evans <dje@canuck.cygnus.com>
266 * tconfig.in (SIM_HAVE_BIENDIAN): Define.
268 Mon Apr 21 17:16:13 1997 Gavin Koch <gavin@cygnus.com>
270 * gencode.c (build_instruction): DIV instructions: check
271 for division by zero and integer overflow before using
272 host's division operation.
274 Thu Apr 17 03:18:14 1997 Doug Evans <dje@canuck.cygnus.com>
276 * Makefile.in (SIM_OBJS): Add sim-load.o.
277 * interp.c: #include bfd.h.
278 (target_byte_order): Delete.
279 (sim_kind, myname, big_endian_p): New static locals.
280 (sim_open): Set sim_kind, myname. Move call to set_endianness to
281 after argument parsing. Recognize -E arg, set endianness accordingly.
282 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
283 load file into simulator. Set PC from bfd.
284 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
285 (set_endianness): Use big_endian_p instead of target_byte_order.
287 Wed Apr 16 17:55:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
289 * interp.c (sim_size): Delete prototype - conflicts with
290 definition in remote-sim.h. Correct definition.
292 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
294 * configure: Regenerated to track ../common/aclocal.m4 changes.
297 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
299 * interp.c (sim_open): New arg `kind'.
301 * configure: Regenerated to track ../common/aclocal.m4 changes.
303 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
305 * configure: Regenerated to track ../common/aclocal.m4 changes.
307 Tue Mar 25 11:38:22 1997 Doug Evans <dje@canuck.cygnus.com>
309 * interp.c (sim_open): Set optind to 0 before calling getopt.
311 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
313 * configure: Regenerated to track ../common/aclocal.m4 changes.
315 Mon Mar 17 10:52:59 1997 Gavin Koch <gavin@cetus.cygnus.com>
317 * interp.c : Replace uses of pr_addr with pr_uword64
318 where the bit length is always 64 independent of SIM_ADDR.
319 (pr_uword64) : added.
321 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
323 * configure: Re-generate.
325 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
327 * configure: Regenerate to track ../common/aclocal.m4 changes.
329 Thu Mar 13 12:51:36 1997 Doug Evans <dje@canuck.cygnus.com>
331 * interp.c (sim_open): New SIM_DESC result. Argument is now
333 (other sim_*): New SIM_DESC argument.
336 Wed Feb 26 18:32:21 1997 Gavin Koch <gavin@cygnus.com>
338 * gencode.c (POP_AND,POP_OR,POP_NOR,POP_XOR):
339 Change values to avoid overloading DOUBLEWORD which is tested
341 * gencode.c: reinstate "offending code".
344 Mon Feb 24 22:47:14 1997 Dawn Perchik <dawn@cygnus.com>
346 * interp.c: Fix printing of addresses for non-64-bit targets.
347 (pr_addr): Add function to print address based on size.
349 * gencode.c: #ifdef out offending code until a permanent fix
350 can be added. Code is causing build errors for non-5900 mips targets.
354 Thu Feb 20 10:40:24 1997 Gavin Koch <gavin@cetus.cygnus.com>
356 * gencode.c (process_instructions): Correct test for ISA dependent
357 architecture bits in isa field of MIPS_DECODE.
360 Wed Feb 19 14:42:09 1997 Mark Alexander <marka@cygnus.com>
362 * interp.c (simopen): Add support for LSI MiniRISC PMON vectors.
365 Tue Feb 18 17:03:47 1997 Gavin Koch <gavin@cygnus.com>
367 * gencode.c (MIPS_DECODE): Correct instruction feature flags for
371 Thu Feb 13 14:08:30 1997 Ian Lance Taylor <ian@cygnus.com>
373 * gencode.c (build_mips16_operands): Correct computation of base
374 address for extended PC relative instruction.
377 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
379 * Makefile.in, configure, configure.in, gencode.c,
380 interp.c, support.h: add r5900.
383 Thu Feb 6 17:16:15 1997 Ian Lance Taylor <ian@cygnus.com>
385 * interp.c (mips16_entry): Add support for floating point cases.
386 (SignalException): Pass floating point cases to mips16_entry.
387 (ValueFPR): Don't restrict fmt_single and fmt_word to even
389 (StoreFPR): Likewise. Also, don't clobber fpr + 1 for fmt_single
391 (COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR,
392 and then set the state to fmt_uninterpreted.
393 (COP_SW): Temporarily set the state to fmt_word while calling
396 Tue Feb 4 16:48:25 1997 Ian Lance Taylor <ian@cygnus.com>
398 * gencode.c (build_instruction): The high order may be set in the
399 comparison flags at any ISA level, not just ISA 4.
401 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
403 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
404 COMMON_{PRE,POST}_CONFIG_FRAG instead.
405 * configure.in: sinclude ../common/aclocal.m4.
406 * configure: Regenerated.
408 Fri Jan 31 11:11:45 1997 Ian Lance Taylor <ian@cygnus.com>
410 * configure: Rebuild after change to aclocal.m4.
412 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
414 * configure configure.in Makefile.in: Update to new configure
415 scheme which is more compatible with WinGDB builds.
416 * configure.in: Improve comment on how to run autoconf.
417 * configure: Re-run autoconf to get new ../common/aclocal.m4.
418 * Makefile.in: Use autoconf substitution to install common
421 Wed Jan 8 12:39:03 1997 Jim Wilson <wilson@cygnus.com>
423 * gencode.c (build_instruction): Use BigEndianCPU instead of
426 Thu Jan 02 22:23:04 1997 Mark Alexander <marka@cygnus.com>
428 * interp.c (sim_monitor): Make output to stdout visible in
429 wingdb's I/O log window.
431 Tue Dec 31 07:04:00 1996 Mark Alexander <marka@cygnus.com>
433 * support.h: Undo previous change to SIGTRAP
436 Mon Dec 30 17:36:06 1996 Ian Lance Taylor <ian@cygnus.com>
438 * interp.c (store_word, load_word): New static functions.
439 (mips16_entry): New static function.
440 (SignalException): Look for mips16 entry and exit instructions.
441 (simulate): Use the correct index when setting fpr_state after
442 doing a pending move.
444 Sun Dec 29 09:37:18 1996 Mark Alexander <marka@cygnus.com>
446 * interp.c: Fix byte-swapping code throughout to work on
447 both little- and big-endian hosts.
449 Sun Dec 29 09:18:32 1996 Mark Alexander <marka@cygnus.com>
451 * support.h: Make definitions of SIGTRAP and SIGQUIT consistent
452 with gdb/config/i386/xm-windows.h.
454 Fri Dec 27 22:48:51 1996 Mark Alexander <marka@cygnus.com>
456 * gencode.c (build_instruction): Work around MSVC++ code gen bug
457 that messes up arithmetic shifts.
459 Fri Dec 20 11:04:05 1996 Stu Grossman (grossman@critters.cygnus.com)
461 * support.h: Use _WIN32 instead of __WIN32__. Also add defs for
462 SIGTRAP and SIGQUIT for _WIN32.
464 Thu Dec 19 14:07:27 1996 Ian Lance Taylor <ian@cygnus.com>
466 * gencode.c (build_instruction) [MUL]: Cast operands to word64, to
467 force a 64 bit multiplication.
468 (build_instruction) [OR]: In mips16 mode, don't do anything if the
469 destination register is 0, since that is the default mips16 nop
472 Mon Dec 16 14:59:38 1996 Ian Lance Taylor <ian@cygnus.com>
474 * gencode.c (MIPS16_DECODE): SWRASP is I8, not RI.
475 (build_endian_shift): Don't check proc64.
476 (build_instruction): Always set memval to uword64. Cast op2 to
477 uword64 when shifting it left in memory instructions. Always use
478 the same code for stores--don't special case proc64.
480 * gencode.c (build_mips16_operands): Fix base PC value for PC
482 (build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a
484 * interp.c (simJALDELAYSLOT): Define.
485 (JALDELAYSLOT): Define.
486 (INDELAYSLOT, INJALDELAYSLOT): Define.
487 (simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared.
489 Tue Dec 24 22:11:20 1996 Angela Marie Thomas (angela@cygnus.com)
491 * interp.c (sim_open): add flush_cache as a PMON routine
492 (sim_monitor): handle flush_cache by ignoring it
494 Wed Dec 11 13:53:51 1996 Jim Wilson <wilson@cygnus.com>
496 * gencode.c (build_instruction): Use !ByteSwapMem instead of
498 * interp.c (CONFIG, config_EP_{mask,shift,D,DxxDxx, config_BE): Delete.
499 (BigEndianMem): Rename to ByteSwapMem and change sense.
500 (BigEndianCPU, sim_write, LoadMemory, StoreMemory): Change
501 BigEndianMem references to !ByteSwapMem.
502 (set_endianness): New function, with prototype.
503 (sim_open): Call set_endianness.
504 (sim_info): Use simBE instead of BigEndianMem.
505 (xfer_direct_word, xfer_direct_long, swap_direct_word,
506 swap_direct_long, xfer_big_word, xfer_big_long, xfer_little_word,
507 xfer_little_long, swap_word, swap_long): Delete unnecessary MSC_VER
508 ifdefs, keeping the prototype declaration.
509 (swap_word): Rewrite correctly.
510 (ColdReset): Delete references to CONFIG. Delete endianness related
511 code; moved to set_endianness.
513 Tue Dec 10 11:32:04 1996 Jim Wilson <wilson@cygnus.com>
515 * gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits.
516 * interp.c (CHECKHILO): Define away.
517 (simSIGINT): New macro.
518 (membank_size): Increase from 1MB to 2MB.
519 (control_c): New function.
520 (sim_resume): Rename parameter signal to signal_number. Add local
521 variable prev. Call signal before and after simulate.
522 (sim_stop_reason): Add simSIGINT support.
523 (sim_warning, sim_error, dotrace, SignalException): Define as stdarg
525 (sim_warning): Delete call to SignalException. Do call printf_filtered
527 (AddressTranslation): Add #ifdef DEBUG around debugging message and
528 a call to sim_warning.
530 Wed Nov 27 11:53:50 1996 Ian Lance Taylor <ian@cygnus.com>
532 * gencode.c (process_instructions): If ! proc64, skip DOUBLEWORD
535 Tue Nov 26 11:53:12 1996 Ian Lance Taylor <ian@cygnus.com>
537 Add support for mips16 (16 bit MIPS implementation):
538 * gencode.c (inst_type): Add mips16 instruction encoding types.
539 (GETDATASIZEINSN): Define.
540 (MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add
541 jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and
543 (MIPS16_DECODE): New table, for mips16 instructions.
544 (bitmap_val): New static function.
545 (struct mips16_op): Define.
546 (mips16_op_table): New table, for mips16 operands.
547 (build_mips16_operands): New static function.
548 (process_instructions): If PC is odd, decode a mips16
549 instruction. Break out instruction handling into new
550 build_instruction function.
551 (build_instruction): New static function, broken out of
552 process_instructions. Check modifiers rather than flags for SHIFT
553 bit count and m[ft]{hi,lo} direction.
554 (usage): Pass program name to fprintf.
555 (main): Remove unused variable this_option_optind. Change
556 ``*loptarg++'' to ``loptarg++''.
557 (my_strtoul): Parenthesize && within ||.
558 * interp.c (LoadMemory): Accept a halfword pAddr if vAddr is odd.
559 (simulate): If PC is odd, fetch a 16 bit instruction, and
560 increment PC by 2 rather than 4.
561 * configure.in: Add case for mips16*-*-*.
562 * configure: Rebuild.
564 Fri Nov 22 08:49:36 1996 Mark Alexander <marka@cygnus.com>
566 * interp.c: Allow -t to enable tracing in standalone simulator.
567 Fix garbage output in trace file and error messages.
569 Wed Nov 20 01:54:37 1996 Doug Evans <dje@canuck.cygnus.com>
571 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
572 (SIM_{OBJS,EXTRA_CFLAGS,EXTRA_CLEAN}): Define.
573 * configure.in: Simplify using macros in ../common/aclocal.m4.
574 * configure: Regenerated.
575 * tconfig.in: New file.
577 Tue Nov 12 13:34:00 1996 Dawn Perchik <dawn@cygnus.com>
579 * interp.c: Fix bugs in 64-bit port.
580 Use ansi function declarations for msvc compiler.
581 Initialize and test file pointer in trace code.
582 Prevent duplicate definition of LAST_EMED_REGNUM.
584 Tue Oct 15 11:07:06 1996 Mark Alexander <marka@cygnus.com>
586 * interp.c (xfer_big_long): Prevent unwanted sign extension.
588 Thu Sep 26 17:35:00 1996 James G. Smith <jsmith@cygnus.co.uk>
590 * interp.c (SignalException): Check for explicit terminating
592 * gencode.c: Pass instruction value through SignalException()
593 calls for Trap, Breakpoint and Syscall.
595 Thu Sep 26 11:35:17 1996 James G. Smith <jsmith@cygnus.co.uk>
597 * interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is
598 only used on those hosts that provide it.
599 * configure.in: Add sqrt() to list of functions to be checked for.
600 * config.in: Re-generated.
601 * configure: Re-generated.
603 Fri Sep 20 15:47:12 1996 Ian Lance Taylor <ian@cygnus.com>
605 * gencode.c (process_instructions): Call build_endian_shift when
606 expanding STORE RIGHT, to fix swr.
607 * support.h (SIGNEXTEND): If the sign bit is not set, explicitly
609 * interp.c (Convert): Fix fmt_single to fmt_long to not truncate.
610 Fix float to int conversions to produce signed values.
612 Thu Sep 19 15:34:17 1996 Ian Lance Taylor <ian@cygnus.com>
614 * gencode.c (MIPS_DECODE): Set UNSIGNED for multu instruction.
615 (process_instructions): Correct handling of nor instruction.
616 Correct shift count for 32 bit shift instructions. Correct sign
617 extension for arithmetic shifts to not shift the number of bits in
618 the type. Fix 64 bit multiply high word calculation. Fix 32 bit
619 unsigned multiply. Fix ldxc1 and friends to use coprocessor 1.
621 * interp.c (CHECKHILO): Don't set HIACCESS, LOACCESS, or HLPC.
622 It's OK to have a mult follow a mult. What's not OK is to have a
624 (Convert): Comment out incorrect rounding code.
626 Mon Sep 16 11:38:16 1996 James G. Smith <jsmith@cygnus.co.uk>
628 * interp.c (sim_monitor): Improved monitor printf
629 simulation. Tidied up simulator warnings, and added "--log" option
630 for directing warning message output.
631 * gencode.c: Use sim_warning() rather than WARNING macro.
633 Thu Aug 22 15:03:12 1996 Ian Lance Taylor <ian@cygnus.com>
635 * Makefile.in (gencode): Depend upon gencode.o, getopt.o, and
636 getopt1.o, rather than on gencode.c. Link objects together.
637 Don't link against -liberty.
638 (gencode.o, getopt.o, getopt1.o): New targets.
639 * gencode.c: Include <ctype.h> and "ansidecl.h".
640 (AND): Undefine after including "ansidecl.h".
641 (ULONG_MAX): Define if not defined.
642 (OP_*): Don't define macros; now defined in opcode/mips.h.
643 (main): Call my_strtoul rather than strtoul.
644 (my_strtoul): New static function.
646 Wed Jul 17 18:12:38 1996 Stu Grossman (grossman@critters.cygnus.com)
648 * gencode.c (process_instructions): Generate word64 and uword64
649 instead of `long long' and `unsigned long long' data types.
650 * interp.c: #include sysdep.h to get signals, and define default
652 * (Convert): Work around for Visual-C++ compiler bug with type
654 * support.h: Make things compile under Visual-C++ by using
655 __int64 instead of `long long'. Change many refs to long long
656 into word64/uword64 typedefs.
658 Wed Jun 26 12:24:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
660 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
661 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
663 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
664 (AC_PROG_INSTALL): Added.
665 (AC_PROG_CC): Moved to before configure.host call.
666 * configure: Rebuilt.
668 Wed Jun 5 08:28:13 1996 James G. Smith <jsmith@cygnus.co.uk>
670 * configure.in: Define @SIMCONF@ depending on mips target.
671 * configure: Rebuild.
672 * Makefile.in (run): Add @SIMCONF@ to control simulator
674 * gencode.c: Change LOADDRMASK to 64bit memory model only.
675 * interp.c: Remove some debugging, provide more detailed error
676 messages, update memory accesses to use LOADDRMASK.
678 Mon Jun 3 11:55:03 1996 Ian Lance Taylor <ian@cygnus.com>
680 * configure.in: Add calls to AC_CONFIG_HEADER, AC_CHECK_HEADERS,
681 AC_CHECK_LIB, and AC_CHECK_FUNCS. Change AC_OUTPUT to set
683 * configure: Rebuild.
684 * config.in: New file, generated by autoheader.
685 * interp.c: Include "config.h". Include <stdlib.h>, <string.h>,
686 and <strings.h> if they exist. Replace #ifdef sun with #ifdef
687 HAVE_ANINT and HAVE_AINT, as appropriate.
688 * Makefile.in (run): Use @LIBS@ rather than -lm.
689 (interp.o): Depend upon config.h.
690 (Makefile): Just rebuild Makefile.
691 (clean): Remove stamp-h.
692 (mostlyclean): Make the same as clean, not as distclean.
693 (config.h, stamp-h): New targets.
695 Fri May 10 00:41:17 1996 James G. Smith <jsmith@cygnus.co.uk>
697 * interp.c (ColdReset): Fix boolean test. Make all simulator
700 Wed May 8 15:12:58 1996 James G. Smith <jsmith@cygnus.co.uk>
702 * interp.c (xfer_direct_word, xfer_direct_long,
703 swap_direct_word, swap_direct_long, xfer_big_word,
704 xfer_big_long, xfer_little_word, xfer_little_long,
705 swap_word,swap_long): Added.
706 * interp.c (ColdReset): Provide function indirection to
707 host<->simulated_target transfer routines.
708 * interp.c (sim_store_register, sim_fetch_register): Updated to
709 make use of indirected transfer routines.
711 Fri Apr 19 15:48:24 1996 James G. Smith <jsmith@cygnus.co.uk>
713 * gencode.c (process_instructions): Ensure FP ABS instruction
715 * interp.c (AbsoluteValue): Add routine. Also provide simple PMON
718 Wed Apr 10 09:51:38 1996 James G. Smith <jsmith@cygnus.co.uk>
720 * interp.c (sim_do_command): Complain if callback structure not
723 Thu Mar 28 13:50:51 1996 James G. Smith <jsmith@cygnus.co.uk>
725 * interp.c (Convert): Provide round-to-nearest and round-to-zero
726 support for Sun hosts.
727 * Makefile.in (gencode): Ensure the host compiler and libraries
728 used for cross-hosted build.
730 Wed Mar 27 14:42:12 1996 James G. Smith <jsmith@cygnus.co.uk>
732 * interp.c, gencode.c: Some more (TODO) tidying.
734 Thu Mar 7 11:19:33 1996 James G. Smith <jsmith@cygnus.co.uk>
736 * gencode.c, interp.c: Replaced explicit long long references with
737 WORD64HI, WORD64LO, SET64HI and SET64LO macro calls.
738 * support.h (SET64LO, SET64HI): Macros added.
740 Wed Feb 21 12:16:21 1996 Ian Lance Taylor <ian@cygnus.com>
742 * configure: Regenerate with autoconf 2.7.
744 Tue Jan 30 08:48:18 1996 Fred Fish <fnf@cygnus.com>
746 * interp.c (LoadMemory): Enclose text following #endif in /* */.
747 * support.h: Remove superfluous "1" from #if.
748 * support.h (CHECKSIM): Remove stray 'a' at end of line.
750 Mon Dec 4 11:44:40 1995 Jamie Smith <jsmith@cygnus.com>
752 * interp.c (StoreFPR): Control UndefinedResult() call on
753 WARN_RESULT manifest.
755 Fri Dec 1 16:37:19 1995 James G. Smith <jsmith@cygnus.co.uk>
757 * gencode.c: Tidied instruction decoding, and added FP instruction
760 * interp.c: Added dineroIII, and BSD profiling support. Also
761 run-time FP handling.
763 Sun Oct 22 00:57:18 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
765 * Changelog, Makefile.in, README.Cygnus, configure, configure.in,
766 gencode.c, interp.c, support.h: created.