sim/mips/ChangeLog

   1 Wed Apr 23 17:32:19 1997  Doug Evans  <dje@canuck.cygnus.com>
   2
   3         * tconfig.in (SIM_HAVE_BIENDIAN): Define.
   4
   5 Mon Apr 21 17:16:13 1997  Gavin Koch  <gavin@cygnus.com>
   6
   7         * gencode.c (build_instruction): DIV instructions: check
   8         for division by zero and integer overflow before using
   9         host's division operation.
  10
  11 Thu Apr 17 03:18:14 1997  Doug Evans  <dje@canuck.cygnus.com>
  12
  13         * Makefile.in (SIM_OBJS): Add sim-load.o.
  14         * interp.c: #include bfd.h.
  15         (target_byte_order): Delete.
  16         (sim_kind, myname, big_endian_p): New static locals.
  17         (sim_open): Set sim_kind, myname.  Move call to set_endianness to
  18         after argument parsing.  Recognize -E arg, set endianness accordingly.
  19         (sim_load): Return SIM_RC.  New arg abfd.  Call sim_load_file to
  20         load file into simulator.  Set PC from bfd.
  21         (sim_create_inferior): Return SIM_RC.  Delete arg start_address.
  22         (set_endianness): Use big_endian_p instead of target_byte_order.
  23
  24 Wed Apr 16 17:55:37 1997  Andrew Cagney  <cagney@b1.cygnus.com>
  25
  26         * interp.c (sim_size): Delete prototype - conflicts with
  27         definition in remote-sim.h.  Correct definition.
  28
  29 Mon Apr  7 15:45:02 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
  30
  31         * configure: Regenerated to track ../common/aclocal.m4 changes.
  32         * config.in: Ditto.
  33
  34 Wed Apr  2 15:06:28 1997  Doug Evans  <dje@canuck.cygnus.com>
  35
  36         * interp.c (sim_open): New arg `kind'.
  37
  38         * configure: Regenerated to track ../common/aclocal.m4 changes.
  39
  40 Wed Apr  2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
  41
  42         * configure: Regenerated to track ../common/aclocal.m4 changes.
  43
  44 Tue Mar 25 11:38:22 1997  Doug Evans  <dje@canuck.cygnus.com>
  45
  46         * interp.c (sim_open): Set optind to 0 before calling getopt.
  47
  48 Wed Mar 19 01:14:00 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
  49
  50         * configure: Regenerated to track ../common/aclocal.m4 changes.
  51
  52 Mon Mar 17 10:52:59 1997  Gavin Koch  <gavin@cetus.cygnus.com>
  53
  54         * interp.c : Replace uses of pr_addr with pr_uword64
  55         where the bit length is always 64 independent of SIM_ADDR.
  56         (pr_uword64) : added.
  57
  58 Mon Mar 17 15:10:07 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
  59
  60         * configure: Re-generate.
  61
  62 Fri Mar 14 10:34:11 1997  Michael Meissner  <meissner@cygnus.com>
  63
  64         * configure: Regenerate to track ../common/aclocal.m4 changes.
  65
  66 Thu Mar 13 12:51:36 1997  Doug Evans  <dje@canuck.cygnus.com>
  67
  68         * interp.c (sim_open): New SIM_DESC result.  Argument is now
  69         in argv form.
  70         (other sim_*): New SIM_DESC argument.
  71
  72 start-sanitize-r5900
  73 Wed Feb 26 18:32:21 1997  Gavin Koch  <gavin@cygnus.com>
  74
  75         * gencode.c (POP_AND,POP_OR,POP_NOR,POP_XOR):
  76         Change values to avoid overloading DOUBLEWORD which is tested
  77         for all insns.
  78         * gencode.c: reinstate "offending code".
  79 end-sanitize-r5900
  80
  81 Mon Feb 24 22:47:14 1997  Dawn Perchik  <dawn@cygnus.com>
  82
  83         * interp.c: Fix printing of addresses for non-64-bit targets.
  84         (pr_addr): Add function to print address based on size.
  85 start-sanitize-r5900
  86         * gencode.c: #ifdef out offending code until a permanent fix
  87         can be added.  Code is causing build errors for non-5900 mips targets.
  88 end-sanitize-r5900
  89
  90 start-sanitize-r5900
  91 Thu Feb 20 10:40:24 1997  Gavin Koch  <gavin@cetus.cygnus.com>
  92
  93         * gencode.c (process_instructions): Correct test for ISA dependent
  94         architecture bits in isa field of MIPS_DECODE.
  95
  96 end-sanitize-r5900
  97 Wed Feb 19 14:42:09 1997  Mark Alexander  <marka@cygnus.com>
  98
  99         * interp.c (simopen): Add support for LSI MiniRISC PMON vectors.
 100
 101 start-sanitize-r5900
 102 Tue Feb 18 17:03:47 1997  Gavin Koch  <gavin@cygnus.com>
 103
 104         * gencode.c (MIPS_DECODE): Correct instruction feature flags for
 105         PMADDUW.
 106
 107 end-sanitize-r5900
 108 Thu Feb 13 14:08:30 1997  Ian Lance Taylor  <ian@cygnus.com>
 109
 110         * gencode.c (build_mips16_operands): Correct computation of base
 111         address for extended PC relative instruction.
 112
 113 start-sanitize-r5900
 114 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
 115
 116         * Makefile.in, configure, configure.in, gencode.c,
 117         interp.c, support.h: add r5900.
 118
 119 end-sanitize-r5900
 120 Thu Feb  6 17:16:15 1997  Ian Lance Taylor  <ian@cygnus.com>
 121
 122         * interp.c (mips16_entry): Add support for floating point cases.
 123         (SignalException): Pass floating point cases to mips16_entry.
 124         (ValueFPR): Don't restrict fmt_single and fmt_word to even
 125         registers.
 126         (StoreFPR): Likewise.  Also, don't clobber fpr + 1 for fmt_single
 127         or fmt_word.
 128         (COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR,
 129         and then set the state to fmt_uninterpreted.
 130         (COP_SW): Temporarily set the state to fmt_word while calling
 131         ValueFPR.
 132
 133 Tue Feb  4 16:48:25 1997  Ian Lance Taylor  <ian@cygnus.com>
 134
 135         * gencode.c (build_instruction): The high order may be set in the
 136         comparison flags at any ISA level, not just ISA 4.
 137
 138 Tue Feb  4 13:33:30 1997  Doug Evans  <dje@canuck.cygnus.com>
 139
 140         * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
 141         COMMON_{PRE,POST}_CONFIG_FRAG instead.
 142         * configure.in: sinclude ../common/aclocal.m4.
 143         * configure: Regenerated.
 144
 145 Fri Jan 31 11:11:45 1997  Ian Lance Taylor  <ian@cygnus.com>
 146
 147         * configure: Rebuild after change to aclocal.m4.
 148
 149 Thu Jan 23 11:46:23 1997  Stu Grossman  (grossman@critters.cygnus.com)
 150
 151         * configure configure.in Makefile.in:  Update to new configure
 152         scheme which is more compatible with WinGDB builds.
 153         * configure.in:  Improve comment on how to run autoconf.
 154         * configure:  Re-run autoconf to get new ../common/aclocal.m4.
 155         * Makefile.in:  Use autoconf substitution to install common
 156         makefile fragment.
 157
 158 Wed Jan  8 12:39:03 1997  Jim Wilson  <wilson@cygnus.com>
 159
 160         * gencode.c (build_instruction): Use BigEndianCPU instead of
 161         ByteSwapMem.
 162
 163 Thu Jan 02 22:23:04 1997  Mark Alexander  <marka@cygnus.com>
 164
 165         * interp.c (sim_monitor): Make output to stdout visible in
 166         wingdb's I/O log window.
 167
 168 Tue Dec 31 07:04:00 1996  Mark Alexander  <marka@cygnus.com>
 169
 170         * support.h: Undo previous change to SIGTRAP
 171         and SIGQUIT values.
 172
 173 Mon Dec 30 17:36:06 1996  Ian Lance Taylor  <ian@cygnus.com>
 174
 175         * interp.c (store_word, load_word): New static functions.
 176         (mips16_entry): New static function.
 177         (SignalException): Look for mips16 entry and exit instructions.
 178         (simulate): Use the correct index when setting fpr_state after
 179         doing a pending move.
 180
 181 Sun Dec 29 09:37:18 1996  Mark Alexander  <marka@cygnus.com>
 182
 183         * interp.c: Fix byte-swapping code throughout to work on
 184         both little- and big-endian hosts.
 185
 186 Sun Dec 29 09:18:32 1996  Mark Alexander  <marka@cygnus.com>
 187
 188         * support.h: Make definitions of SIGTRAP and SIGQUIT consistent
 189         with gdb/config/i386/xm-windows.h.
 190
 191 Fri Dec 27 22:48:51 1996  Mark Alexander  <marka@cygnus.com>
 192
 193         * gencode.c (build_instruction): Work around MSVC++ code gen bug
 194         that messes up arithmetic shifts.
 195
 196 Fri Dec 20 11:04:05 1996  Stu Grossman  (grossman@critters.cygnus.com)
 197
 198         * support.h:  Use _WIN32 instead of __WIN32__.  Also add defs for
 199         SIGTRAP and SIGQUIT for _WIN32.
 200
 201 Thu Dec 19 14:07:27 1996  Ian Lance Taylor  <ian@cygnus.com>
 202
 203         * gencode.c (build_instruction) [MUL]: Cast operands to word64, to
 204         force a 64 bit multiplication.
 205         (build_instruction) [OR]: In mips16 mode, don't do anything if the
 206         destination register is 0, since that is the default mips16 nop
 207         instruction.
 208
 209 Mon Dec 16 14:59:38 1996  Ian Lance Taylor  <ian@cygnus.com>
 210
 211         * gencode.c (MIPS16_DECODE): SWRASP is I8, not RI.
 212         (build_endian_shift): Don't check proc64.
 213         (build_instruction): Always set memval to uword64.  Cast op2 to
 214         uword64 when shifting it left in memory instructions.  Always use
 215         the same code for stores--don't special case proc64.
 216
 217         * gencode.c (build_mips16_operands): Fix base PC value for PC
 218         relative operands.
 219         (build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a
 220         jal instruction.
 221         * interp.c (simJALDELAYSLOT): Define.
 222         (JALDELAYSLOT): Define.
 223         (INDELAYSLOT, INJALDELAYSLOT): Define.
 224         (simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared.
 225
 226 Tue Dec 24 22:11:20 1996  Angela Marie Thomas (angela@cygnus.com)
 227
 228         * interp.c (sim_open): add flush_cache as a PMON routine
 229         (sim_monitor): handle flush_cache by ignoring it
 230
 231 Wed Dec 11 13:53:51 1996  Jim Wilson  <wilson@cygnus.com>
 232
 233         * gencode.c (build_instruction): Use !ByteSwapMem instead of
 234         BigEndianMem.
 235         * interp.c (CONFIG, config_EP_{mask,shift,D,DxxDxx, config_BE): Delete.
 236         (BigEndianMem): Rename to ByteSwapMem and change sense.
 237         (BigEndianCPU, sim_write, LoadMemory, StoreMemory): Change
 238         BigEndianMem references to !ByteSwapMem.
 239         (set_endianness): New function, with prototype.
 240         (sim_open): Call set_endianness.
 241         (sim_info): Use simBE instead of BigEndianMem.
 242         (xfer_direct_word, xfer_direct_long, swap_direct_word,
 243         swap_direct_long, xfer_big_word, xfer_big_long, xfer_little_word,
 244         xfer_little_long, swap_word, swap_long): Delete unnecessary MSC_VER
 245         ifdefs, keeping the prototype declaration.
 246         (swap_word): Rewrite correctly.
 247         (ColdReset): Delete references to CONFIG.  Delete endianness related
 248         code; moved to set_endianness.
 249
 250 Tue Dec 10 11:32:04 1996  Jim Wilson  <wilson@cygnus.com>
 251
 252         * gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits.
 253         * interp.c (CHECKHILO): Define away.
 254         (simSIGINT): New macro.
 255         (membank_size): Increase from 1MB to 2MB.
 256         (control_c): New function.
 257         (sim_resume): Rename parameter signal to signal_number.  Add local
 258         variable prev.  Call signal before and after simulate.
 259         (sim_stop_reason): Add simSIGINT support.
 260         (sim_warning, sim_error, dotrace, SignalException): Define as stdarg
 261         functions always.
 262         (sim_warning): Delete call to SignalException.  Do call printf_filtered
 263         if logfh is NULL.
 264         (AddressTranslation): Add #ifdef DEBUG around debugging message and
 265         a call to sim_warning.
 266
 267 Wed Nov 27 11:53:50 1996  Ian Lance Taylor  <ian@cygnus.com>
 268
 269         * gencode.c (process_instructions): If ! proc64, skip DOUBLEWORD
 270         16 bit instructions.
 271
 272 Tue Nov 26 11:53:12 1996  Ian Lance Taylor  <ian@cygnus.com>
 273
 274         Add support for mips16 (16 bit MIPS implementation):
 275         * gencode.c (inst_type): Add mips16 instruction encoding types.
 276         (GETDATASIZEINSN): Define.
 277         (MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv.  Add
 278         jalx.  Add LEFT flag to mfhi and mflo.  Add RIGHT flag to mthi and
 279         mtlo.
 280         (MIPS16_DECODE): New table, for mips16 instructions.
 281         (bitmap_val): New static function.
 282         (struct mips16_op): Define.
 283         (mips16_op_table): New table, for mips16 operands.
 284         (build_mips16_operands): New static function.
 285         (process_instructions): If PC is odd, decode a mips16
 286         instruction.  Break out instruction handling into new
 287         build_instruction function.
 288         (build_instruction): New static function, broken out of
 289         process_instructions.  Check modifiers rather than flags for SHIFT
 290         bit count and m[ft]{hi,lo} direction.
 291         (usage): Pass program name to fprintf.
 292         (main): Remove unused variable this_option_optind.  Change
 293         ``*loptarg++'' to ``loptarg++''.
 294         (my_strtoul): Parenthesize && within ||.
 295         * interp.c (LoadMemory): Accept a halfword pAddr if vAddr is odd.
 296         (simulate): If PC is odd, fetch a 16 bit instruction, and
 297         increment PC by 2 rather than 4.
 298         * configure.in: Add case for mips16*-*-*.
 299         * configure: Rebuild.
 300
 301 Fri Nov 22 08:49:36 1996  Mark Alexander  <marka@cygnus.com>
 302
 303         * interp.c: Allow -t to enable tracing in standalone simulator.
 304         Fix garbage output in trace file and error messages.
 305
 306 Wed Nov 20 01:54:37 1996  Doug Evans  <dje@canuck.cygnus.com>
 307
 308         * Makefile.in: Delete stuff moved to ../common/Make-common.in.
 309         (SIM_{OBJS,EXTRA_CFLAGS,EXTRA_CLEAN}): Define.
 310         * configure.in: Simplify using macros in ../common/aclocal.m4.
 311         * configure: Regenerated.
 312         * tconfig.in: New file.
 313
 314 Tue Nov 12 13:34:00 1996  Dawn Perchik  <dawn@cygnus.com>
 315
 316         * interp.c: Fix bugs in 64-bit port.
 317         Use ansi function declarations for msvc compiler.
 318         Initialize and test file pointer in trace code.
 319         Prevent duplicate definition of LAST_EMED_REGNUM.
 320
 321 Tue Oct 15 11:07:06 1996  Mark Alexander  <marka@cygnus.com>
 322
 323         * interp.c (xfer_big_long): Prevent unwanted sign extension.
 324
 325 Thu Sep 26 17:35:00 1996  James G. Smith  <jsmith@cygnus.co.uk>
 326
 327         * interp.c (SignalException): Check for explicit terminating
 328         breakpoint value.
 329         * gencode.c: Pass instruction value through SignalException()
 330         calls for Trap, Breakpoint and Syscall.
 331
 332 Thu Sep 26 11:35:17 1996  James G. Smith  <jsmith@cygnus.co.uk>
 333
 334         * interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is
 335         only used on those hosts that provide it.
 336         * configure.in: Add sqrt() to list of functions to be checked for.
 337         * config.in: Re-generated.
 338         * configure: Re-generated.
 339
 340 Fri Sep 20 15:47:12 1996  Ian Lance Taylor  <ian@cygnus.com>
 341
 342         * gencode.c (process_instructions): Call build_endian_shift when
 343         expanding STORE RIGHT, to fix swr.
 344         * support.h (SIGNEXTEND): If the sign bit is not set, explicitly
 345         clear the high bits.
 346         * interp.c (Convert): Fix fmt_single to fmt_long to not truncate.
 347         Fix float to int conversions to produce signed values.
 348
 349 Thu Sep 19 15:34:17 1996  Ian Lance Taylor  <ian@cygnus.com>
 350
 351         * gencode.c (MIPS_DECODE): Set UNSIGNED for multu instruction.
 352         (process_instructions): Correct handling of nor instruction.
 353         Correct shift count for 32 bit shift instructions. Correct sign
 354         extension for arithmetic shifts to not shift the number of bits in
 355         the type.  Fix 64 bit multiply high word calculation.  Fix 32 bit
 356         unsigned multiply.  Fix ldxc1 and friends to use coprocessor 1.
 357         Fix madd.
 358         * interp.c (CHECKHILO): Don't set HIACCESS, LOACCESS, or HLPC.
 359         It's OK to have a mult follow a mult.  What's not OK is to have a
 360         mult follow an mfhi.
 361         (Convert): Comment out incorrect rounding code.
 362
 363 Mon Sep 16 11:38:16 1996  James G. Smith  <jsmith@cygnus.co.uk>
 364
 365         * interp.c (sim_monitor): Improved monitor printf
 366         simulation. Tidied up simulator warnings, and added "--log" option
 367         for directing warning message output.
 368         * gencode.c: Use sim_warning() rather than WARNING macro.
 369
 370 Thu Aug 22 15:03:12 1996  Ian Lance Taylor  <ian@cygnus.com>
 371
 372         * Makefile.in (gencode): Depend upon gencode.o, getopt.o, and
 373         getopt1.o, rather than on gencode.c.  Link objects together.
 374         Don't link against -liberty.
 375         (gencode.o, getopt.o, getopt1.o): New targets.
 376         * gencode.c: Include <ctype.h> and "ansidecl.h".
 377         (AND): Undefine after including "ansidecl.h".
 378         (ULONG_MAX): Define if not defined.
 379         (OP_*): Don't define macros; now defined in opcode/mips.h.
 380         (main): Call my_strtoul rather than strtoul.
 381         (my_strtoul): New static function.
 382
 383 Wed Jul 17 18:12:38 1996  Stu Grossman  (grossman@critters.cygnus.com)
 384
 385         * gencode.c (process_instructions):  Generate word64 and uword64
 386         instead of `long long' and `unsigned long long' data types.
 387         * interp.c:  #include sysdep.h to get signals, and define default
 388         for SIGBUS.
 389         * (Convert):  Work around for Visual-C++ compiler bug with type
 390         conversion.
 391         * support.h:  Make things compile under Visual-C++ by using
 392         __int64 instead of `long long'.  Change many refs to long long
 393         into word64/uword64 typedefs.
 394
 395 Wed Jun 26 12:24:55 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
 396
 397         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
 398         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
 399         (docdir): Removed.
 400         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
 401         (AC_PROG_INSTALL): Added.
 402         (AC_PROG_CC): Moved to before configure.host call.
 403         * configure: Rebuilt.
 404
 405 Wed Jun  5 08:28:13 1996  James G. Smith  <jsmith@cygnus.co.uk>
 406
 407         * configure.in: Define @SIMCONF@ depending on mips target.
 408         * configure: Rebuild.
 409         * Makefile.in (run): Add @SIMCONF@ to control simulator
 410         construction.
 411         * gencode.c: Change LOADDRMASK to 64bit memory model only.
 412         * interp.c: Remove some debugging, provide more detailed error
 413         messages, update memory accesses to use LOADDRMASK.
 414
 415 Mon Jun  3 11:55:03 1996  Ian Lance Taylor  <ian@cygnus.com>
 416
 417         * configure.in: Add calls to AC_CONFIG_HEADER, AC_CHECK_HEADERS,
 418         AC_CHECK_LIB, and AC_CHECK_FUNCS.  Change AC_OUTPUT to set
 419         stamp-h.
 420         * configure: Rebuild.
 421         * config.in: New file, generated by autoheader.
 422         * interp.c: Include "config.h".  Include <stdlib.h>, <string.h>,
 423         and <strings.h> if they exist.  Replace #ifdef sun with #ifdef
 424         HAVE_ANINT and HAVE_AINT, as appropriate.
 425         * Makefile.in (run): Use @LIBS@ rather than -lm.
 426         (interp.o): Depend upon config.h.
 427         (Makefile): Just rebuild Makefile.
 428         (clean): Remove stamp-h.
 429         (mostlyclean): Make the same as clean, not as distclean.
 430         (config.h, stamp-h): New targets.
 431
 432 Fri May 10 00:41:17 1996  James G. Smith  <jsmith@cygnus.co.uk>
 433
 434         * interp.c (ColdReset): Fix boolean test. Make all simulator
 435         globals static.
 436
 437 Wed May  8 15:12:58 1996  James G. Smith  <jsmith@cygnus.co.uk>
 438
 439         * interp.c (xfer_direct_word, xfer_direct_long,
 440         swap_direct_word, swap_direct_long, xfer_big_word,
 441         xfer_big_long, xfer_little_word, xfer_little_long,
 442         swap_word,swap_long): Added.
 443         * interp.c (ColdReset): Provide function indirection to
 444         host<->simulated_target transfer routines.
 445         * interp.c (sim_store_register, sim_fetch_register): Updated to
 446         make use of indirected transfer routines.
 447
 448 Fri Apr 19 15:48:24 1996  James G. Smith  <jsmith@cygnus.co.uk>
 449
 450         * gencode.c (process_instructions): Ensure FP ABS instruction
 451         recognised.
 452         * interp.c (AbsoluteValue): Add routine. Also provide simple PMON
 453         system call support.
 454
 455 Wed Apr 10 09:51:38 1996  James G. Smith  <jsmith@cygnus.co.uk>
 456
 457         * interp.c (sim_do_command): Complain if callback structure not
 458         initialised.
 459
 460 Thu Mar 28 13:50:51 1996  James G. Smith  <jsmith@cygnus.co.uk>
 461
 462         * interp.c (Convert): Provide round-to-nearest and round-to-zero
 463         support for Sun hosts.
 464         * Makefile.in (gencode): Ensure the host compiler and libraries
 465         used for cross-hosted build.
 466
 467 Wed Mar 27 14:42:12 1996  James G. Smith  <jsmith@cygnus.co.uk>
 468
 469         * interp.c, gencode.c: Some more (TODO) tidying.
 470
 471 Thu Mar  7 11:19:33 1996  James G. Smith  <jsmith@cygnus.co.uk>
 472
 473         * gencode.c, interp.c: Replaced explicit long long references with
 474         WORD64HI, WORD64LO, SET64HI and SET64LO macro calls.
 475         * support.h (SET64LO, SET64HI): Macros added.
 476
 477 Wed Feb 21 12:16:21 1996  Ian Lance Taylor  <ian@cygnus.com>
 478
 479         * configure: Regenerate with autoconf 2.7.
 480
 481 Tue Jan 30 08:48:18 1996  Fred Fish  <fnf@cygnus.com>
 482
 483         * interp.c (LoadMemory): Enclose text following #endif in /* */.
 484         * support.h: Remove superfluous "1" from #if.
 485         * support.h (CHECKSIM): Remove stray 'a' at end of line.
 486
 487 Mon Dec  4 11:44:40 1995  Jamie Smith  <jsmith@cygnus.com>
 488
 489         * interp.c (StoreFPR): Control UndefinedResult() call on
 490         WARN_RESULT manifest.
 491
 492 Fri Dec  1 16:37:19 1995  James G. Smith  <jsmith@cygnus.co.uk>
 493
 494         * gencode.c: Tidied instruction decoding, and added FP instruction
 495         support.
 496
 497         * interp.c: Added dineroIII, and BSD profiling support. Also
 498         run-time FP handling.
 499
 500 Sun Oct 22 00:57:18 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
 501
 502         * Changelog, Makefile.in, README.Cygnus, configure, configure.in,
 503         gencode.c, interp.c, support.h: created.