1 Tue Sep 9 16:28:28 1997 Andrew Cagney <cagney@b1.cygnus.com>
3 * gencode.c (build_instruction): Use SIGNED64 for 64 bit
5 (build_instruction): Ditto for LL.
8 Sun Sep 7 16:05:46 1997 Gavin Koch <gavin@cygnus.com>
10 * mips/configure.in, mips/gencode: Add tx19/r1900.
13 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
15 * configure: Regenerated to track ../common/aclocal.m4 changes.
18 Mon Sep 1 18:43:30 1997 Andrew Cagney <cagney@b1.cygnus.com>
20 * gencode.c (build_instruction): For "pabsw" and "pabsh", check
21 for overflow due to ABS of MININT, set result to MAXINT.
22 (build_instruction): For "psrlvw", signextend bit 31.
25 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
27 * configure: Regenerated to track ../common/aclocal.m4 changes.
30 Wed Aug 27 14:12:27 1997 Andrew Cagney <cagney@b1.cygnus.com>
32 * interp.c (sim_open): Add call to sim_analyze_program, update
35 Tue Aug 26 10:40:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
37 * interp.c (sim_kill): Delete.
38 (sim_create_inferior): Add ABFD argument. Set PC from same.
39 (sim_load): Move code initializing trap handlers from here.
41 (sim_load): Delete, use sim-hload.c.
43 * Makefile.in (SIM_OBJS): Add sim-hload.o module.
45 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
47 * configure: Regenerated to track ../common/aclocal.m4 changes.
50 Mon Aug 25 15:59:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
52 * interp.c (sim_open): Add ABFD argument.
53 (sim_load): Move call to sim_config from here.
54 (sim_open): To here. Check return status.
57 * gencode.c (build_instruction): Do not define x8000000000000000,
58 x7FFFFFFFFFFFFFFF, or xFFFFFFFF80000000.
62 Mon Jul 28 19:49:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
64 * gencode.c (build_instruction): For "pdivw", "pdivbw" and
65 "pdivuw" check for overflow due to signed divide by -1.
68 Fri Jul 25 15:00:45 1997 Gavin Koch <gavin@cygnus.com>
70 * gencode.c (build_instruction): Two arg MADD should
71 not assign result to $0.
74 Thu Jul 10 11:58:48 1997 Andrew Cagney <cagney@critters.cygnus.com>
76 * gencode.c (build_instruction): For "ppac5" use unsigned
77 arrithmetic so that the sign bit doesn't smear when right shifted.
78 (build_instruction): For "pdiv" perform sign extension when
79 storing results in HI and LO.
80 (build_instructions): For "pdiv" and "pdivbw" check for
82 (build_instruction): For "pmfhl.slw" update hi part of dest
83 register as well as low part.
84 (build_instruction): For "pmfhl" portably handle long long values.
85 (build_instruction): For "pmfhl.sh" correctly negative values.
86 Store half words 2 and three in the correct place.
87 (build_instruction): For "psllvw", sign extend value after shift.
90 Thu Jun 26 12:13:17 1997 Angela Marie Thomas (angela@cygnus.com)
92 * sim/mips/configure: Change default_sim_endian to 0 (bi-endian)
93 * sim/mips/configure.in: Regenerate.
95 Wed Jul 9 10:29:21 1997 Andrew Cagney <cagney@critters.cygnus.com>
97 * interp.c (SUB_REG_UW, SUB_REG_SW, SUB_REG_*): Use more explicit
98 signed8, unsigned8 et.al. types.
101 * gencode.c (build_instruction): For PMULTU* do not sign extend
102 registers. Make generated code easier to debug.
105 * interp.c (SUB_REG_FETCH): Handle both little and big endian
106 hosts when selecting subreg.
109 Tue Jul 8 18:07:20 1997 Andrew Cagney <cagney@andros.cygnus.com>
111 * gencode.c (type_for_data_len): For 32bit operations concerned
112 with overflow, perform op using 64bits.
113 (build_instruction): For PADD, always compute operation using type
114 returned by type_for_data_len.
115 (build_instruction): For PSUBU, when overflow, saturate to zero as
119 Wed Jul 2 11:54:10 1997 Jeffrey A Law (law@cygnus.com)
122 * gencode.c (build_instruction): Handle "pext5" according to
123 version 1.95 of the r5900 ISA.
125 * gencode.c (build_instruction): Handle "ppac5" according to
126 version 1.95 of the r5900 ISA.
129 * interp.c (sim_engine_run): Reset the ZERO register to zero
130 regardless of FEATURE_WARN_ZERO.
131 * gencode.c (FEATURE_WARNINGS): Remove FEATURE_WARN_ZERO.
133 Wed Jun 4 10:43:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
135 * interp.c (decode_coproc): Implement MTC0 N, CAUSE.
136 (SignalException): For BreakPoints ignore any mode bits and just
138 (SignalException): Always set the CAUSE register.
140 Tue Jun 3 05:00:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
142 * interp.c (SignalException): Clear the simDELAYSLOT flag when an
143 exception has been taken.
145 * interp.c: Implement the ERET and mt/f sr instructions.
148 Mon Jun 2 23:28:19 1997 Andrew Cagney <cagney@b1.cygnus.com>
150 * gencode.c (build_instruction): For paddu, extract unsigned
153 * gencode.c (build_instruction): Saturate padds instead of padd
157 Sat May 31 00:44:16 1997 Andrew Cagney <cagney@b1.cygnus.com>
159 * interp.c (SignalException): Don't bother restarting an
162 Fri May 30 23:41:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
164 * interp.c (SignalException): Really take an interrupt.
165 (interrupt_event): Only deliver interrupts when enabled.
167 Tue May 27 20:08:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
169 * interp.c (sim_info): Only print info when verbose.
170 (sim_info) Use sim_io_printf for output.
172 Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
174 * interp.c (CoProcPresent): Add UNUSED attribute - not used by all
177 Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
179 * interp.c (sim_do_command): Check for common commands if a
180 simulator specific command fails.
182 Thu May 22 09:32:03 1997 Gavin Koch <gavin@cygnus.com>
184 * interp.c (sim_engine_run): ifdef out uses of simSTOP, simSTEP
185 and simBE when DEBUG is defined.
187 Wed May 21 09:08:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
189 * interp.c (interrupt_event): New function. Pass exception event
190 onto exception handler.
192 * configure.in: Check for stdlib.h.
193 * configure: Regenerate.
195 * gencode.c (build_instruction): Add UNUSED attribute to tempS
196 variable declaration.
197 (build_instruction): Initialize memval1.
198 (build_instruction): Add UNUSED attribute to byte, bigend,
200 (build_operands): Ditto.
202 * interp.c: Fix GCC warnings.
203 (sim_get_quit_code): Delete.
205 * configure.in: Add INLINE, ENDIAN, HOSTENDIAN and WARNINGS.
206 * Makefile.in: Ditto.
207 * configure: Re-generate.
209 * Makefile.in (SIM_OBJS): Add sim-watch.o module.
211 Tue May 20 15:08:56 1997 Andrew Cagney <cagney@b1.cygnus.com>
213 * interp.c (mips_option_handler): New function parse argumes using
215 (myname): Replace with STATE_MY_NAME.
216 (sim_open): Delete check for host endianness - performed by
218 (simHOSTBE, simBE): Delete, replaced by sim-endian flags.
219 (sim_open): Move much of the initialization from here.
220 (sim_load): To here. After the image has been loaded and
222 (sim_open): Move ColdReset from here.
223 (sim_create_inferior): To here.
224 (sim_open): Make FP check less dependant on host endianness.
226 * Makefile.in (SIM_RUN_OBJS): Set to nrun.o - use new version or
228 * interp.c (sim_set_callbacks): Delete.
230 * interp.c (membank, membank_base, membank_size): Replace with
231 STATE_MEMORY, STATE_MEM_SIZE, STATE_MEM_BASE.
232 (sim_open): Remove call to callback->init. gdb/run do this.
236 * sim-main.h (SIM_HAVE_FLATMEM): Define.
238 * interp.c (big_endian_p): Delete, replaced by
239 current_target_byte_order.
241 Tue May 20 13:55:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
243 * interp.c (host_read_long, host_read_word, host_swap_word,
244 host_swap_long): Delete. Using common sim-endian.
245 (sim_fetch_register, sim_store_register): Use H2T.
246 (pipeline_ticks): Delete. Handled by sim-events.
248 (sim_engine_run): Update.
250 Tue May 20 13:42:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
252 * interp.c (sim_stop_reason): Move code determining simEXCEPTION
254 (SignalException): To here. Signal using sim_engine_halt.
255 (sim_stop_reason): Delete, moved to common.
257 Tue May 20 10:19:48 1997 Andrew Cagney <cagney@b2.cygnus.com>
259 * interp.c (sim_open): Add callback argument.
260 (sim_set_callbacks): Delete SIM_DESC argument.
263 Mon May 19 18:20:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
265 * Makefile.in (SIM_OBJS): Add common modules.
267 * interp.c (sim_set_callbacks): Also set SD callback.
268 (set_endianness, xfer_*, swap_*): Delete.
269 (host_read_word, host_read_long, host_swap_word, host_swap_long):
270 Change to functions using sim-endian macros.
271 (control_c, sim_stop): Delete, use common version.
272 (simulate): Convert into.
273 (sim_engine_run): This function.
274 (sim_resume): Delete.
276 * interp.c (simulation): New variable - the simulator object.
277 (sim_kind): Delete global - merged into simulation.
278 (sim_load): Cleanup. Move PC assignment from here.
279 (sim_create_inferior): To here.
281 * sim-main.h: New file.
282 * interp.c (sim-main.h): Include.
284 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
286 * configure: Regenerated to track ../common/aclocal.m4 changes.
288 Wed Apr 23 17:32:19 1997 Doug Evans <dje@canuck.cygnus.com>
290 * tconfig.in (SIM_HAVE_BIENDIAN): Define.
292 Mon Apr 21 17:16:13 1997 Gavin Koch <gavin@cygnus.com>
294 * gencode.c (build_instruction): DIV instructions: check
295 for division by zero and integer overflow before using
296 host's division operation.
298 Thu Apr 17 03:18:14 1997 Doug Evans <dje@canuck.cygnus.com>
300 * Makefile.in (SIM_OBJS): Add sim-load.o.
301 * interp.c: #include bfd.h.
302 (target_byte_order): Delete.
303 (sim_kind, myname, big_endian_p): New static locals.
304 (sim_open): Set sim_kind, myname. Move call to set_endianness to
305 after argument parsing. Recognize -E arg, set endianness accordingly.
306 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
307 load file into simulator. Set PC from bfd.
308 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
309 (set_endianness): Use big_endian_p instead of target_byte_order.
311 Wed Apr 16 17:55:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
313 * interp.c (sim_size): Delete prototype - conflicts with
314 definition in remote-sim.h. Correct definition.
316 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
318 * configure: Regenerated to track ../common/aclocal.m4 changes.
321 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
323 * interp.c (sim_open): New arg `kind'.
325 * configure: Regenerated to track ../common/aclocal.m4 changes.
327 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
329 * configure: Regenerated to track ../common/aclocal.m4 changes.
331 Tue Mar 25 11:38:22 1997 Doug Evans <dje@canuck.cygnus.com>
333 * interp.c (sim_open): Set optind to 0 before calling getopt.
335 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
337 * configure: Regenerated to track ../common/aclocal.m4 changes.
339 Mon Mar 17 10:52:59 1997 Gavin Koch <gavin@cetus.cygnus.com>
341 * interp.c : Replace uses of pr_addr with pr_uword64
342 where the bit length is always 64 independent of SIM_ADDR.
343 (pr_uword64) : added.
345 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
347 * configure: Re-generate.
349 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
351 * configure: Regenerate to track ../common/aclocal.m4 changes.
353 Thu Mar 13 12:51:36 1997 Doug Evans <dje@canuck.cygnus.com>
355 * interp.c (sim_open): New SIM_DESC result. Argument is now
357 (other sim_*): New SIM_DESC argument.
360 Wed Feb 26 18:32:21 1997 Gavin Koch <gavin@cygnus.com>
362 * gencode.c (POP_AND,POP_OR,POP_NOR,POP_XOR):
363 Change values to avoid overloading DOUBLEWORD which is tested
365 * gencode.c: reinstate "offending code".
368 Mon Feb 24 22:47:14 1997 Dawn Perchik <dawn@cygnus.com>
370 * interp.c: Fix printing of addresses for non-64-bit targets.
371 (pr_addr): Add function to print address based on size.
373 * gencode.c: #ifdef out offending code until a permanent fix
374 can be added. Code is causing build errors for non-5900 mips targets.
378 Thu Feb 20 10:40:24 1997 Gavin Koch <gavin@cetus.cygnus.com>
380 * gencode.c (process_instructions): Correct test for ISA dependent
381 architecture bits in isa field of MIPS_DECODE.
384 Wed Feb 19 14:42:09 1997 Mark Alexander <marka@cygnus.com>
386 * interp.c (simopen): Add support for LSI MiniRISC PMON vectors.
389 Tue Feb 18 17:03:47 1997 Gavin Koch <gavin@cygnus.com>
391 * gencode.c (MIPS_DECODE): Correct instruction feature flags for
395 Thu Feb 13 14:08:30 1997 Ian Lance Taylor <ian@cygnus.com>
397 * gencode.c (build_mips16_operands): Correct computation of base
398 address for extended PC relative instruction.
401 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
403 * Makefile.in, configure, configure.in, gencode.c,
404 interp.c, support.h: add r5900.
407 Thu Feb 6 17:16:15 1997 Ian Lance Taylor <ian@cygnus.com>
409 * interp.c (mips16_entry): Add support for floating point cases.
410 (SignalException): Pass floating point cases to mips16_entry.
411 (ValueFPR): Don't restrict fmt_single and fmt_word to even
413 (StoreFPR): Likewise. Also, don't clobber fpr + 1 for fmt_single
415 (COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR,
416 and then set the state to fmt_uninterpreted.
417 (COP_SW): Temporarily set the state to fmt_word while calling
420 Tue Feb 4 16:48:25 1997 Ian Lance Taylor <ian@cygnus.com>
422 * gencode.c (build_instruction): The high order may be set in the
423 comparison flags at any ISA level, not just ISA 4.
425 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
427 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
428 COMMON_{PRE,POST}_CONFIG_FRAG instead.
429 * configure.in: sinclude ../common/aclocal.m4.
430 * configure: Regenerated.
432 Fri Jan 31 11:11:45 1997 Ian Lance Taylor <ian@cygnus.com>
434 * configure: Rebuild after change to aclocal.m4.
436 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
438 * configure configure.in Makefile.in: Update to new configure
439 scheme which is more compatible with WinGDB builds.
440 * configure.in: Improve comment on how to run autoconf.
441 * configure: Re-run autoconf to get new ../common/aclocal.m4.
442 * Makefile.in: Use autoconf substitution to install common
445 Wed Jan 8 12:39:03 1997 Jim Wilson <wilson@cygnus.com>
447 * gencode.c (build_instruction): Use BigEndianCPU instead of
450 Thu Jan 02 22:23:04 1997 Mark Alexander <marka@cygnus.com>
452 * interp.c (sim_monitor): Make output to stdout visible in
453 wingdb's I/O log window.
455 Tue Dec 31 07:04:00 1996 Mark Alexander <marka@cygnus.com>
457 * support.h: Undo previous change to SIGTRAP
460 Mon Dec 30 17:36:06 1996 Ian Lance Taylor <ian@cygnus.com>
462 * interp.c (store_word, load_word): New static functions.
463 (mips16_entry): New static function.
464 (SignalException): Look for mips16 entry and exit instructions.
465 (simulate): Use the correct index when setting fpr_state after
466 doing a pending move.
468 Sun Dec 29 09:37:18 1996 Mark Alexander <marka@cygnus.com>
470 * interp.c: Fix byte-swapping code throughout to work on
471 both little- and big-endian hosts.
473 Sun Dec 29 09:18:32 1996 Mark Alexander <marka@cygnus.com>
475 * support.h: Make definitions of SIGTRAP and SIGQUIT consistent
476 with gdb/config/i386/xm-windows.h.
478 Fri Dec 27 22:48:51 1996 Mark Alexander <marka@cygnus.com>
480 * gencode.c (build_instruction): Work around MSVC++ code gen bug
481 that messes up arithmetic shifts.
483 Fri Dec 20 11:04:05 1996 Stu Grossman (grossman@critters.cygnus.com)
485 * support.h: Use _WIN32 instead of __WIN32__. Also add defs for
486 SIGTRAP and SIGQUIT for _WIN32.
488 Thu Dec 19 14:07:27 1996 Ian Lance Taylor <ian@cygnus.com>
490 * gencode.c (build_instruction) [MUL]: Cast operands to word64, to
491 force a 64 bit multiplication.
492 (build_instruction) [OR]: In mips16 mode, don't do anything if the
493 destination register is 0, since that is the default mips16 nop
496 Mon Dec 16 14:59:38 1996 Ian Lance Taylor <ian@cygnus.com>
498 * gencode.c (MIPS16_DECODE): SWRASP is I8, not RI.
499 (build_endian_shift): Don't check proc64.
500 (build_instruction): Always set memval to uword64. Cast op2 to
501 uword64 when shifting it left in memory instructions. Always use
502 the same code for stores--don't special case proc64.
504 * gencode.c (build_mips16_operands): Fix base PC value for PC
506 (build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a
508 * interp.c (simJALDELAYSLOT): Define.
509 (JALDELAYSLOT): Define.
510 (INDELAYSLOT, INJALDELAYSLOT): Define.
511 (simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared.
513 Tue Dec 24 22:11:20 1996 Angela Marie Thomas (angela@cygnus.com)
515 * interp.c (sim_open): add flush_cache as a PMON routine
516 (sim_monitor): handle flush_cache by ignoring it
518 Wed Dec 11 13:53:51 1996 Jim Wilson <wilson@cygnus.com>
520 * gencode.c (build_instruction): Use !ByteSwapMem instead of
522 * interp.c (CONFIG, config_EP_{mask,shift,D,DxxDxx, config_BE): Delete.
523 (BigEndianMem): Rename to ByteSwapMem and change sense.
524 (BigEndianCPU, sim_write, LoadMemory, StoreMemory): Change
525 BigEndianMem references to !ByteSwapMem.
526 (set_endianness): New function, with prototype.
527 (sim_open): Call set_endianness.
528 (sim_info): Use simBE instead of BigEndianMem.
529 (xfer_direct_word, xfer_direct_long, swap_direct_word,
530 swap_direct_long, xfer_big_word, xfer_big_long, xfer_little_word,
531 xfer_little_long, swap_word, swap_long): Delete unnecessary MSC_VER
532 ifdefs, keeping the prototype declaration.
533 (swap_word): Rewrite correctly.
534 (ColdReset): Delete references to CONFIG. Delete endianness related
535 code; moved to set_endianness.
537 Tue Dec 10 11:32:04 1996 Jim Wilson <wilson@cygnus.com>
539 * gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits.
540 * interp.c (CHECKHILO): Define away.
541 (simSIGINT): New macro.
542 (membank_size): Increase from 1MB to 2MB.
543 (control_c): New function.
544 (sim_resume): Rename parameter signal to signal_number. Add local
545 variable prev. Call signal before and after simulate.
546 (sim_stop_reason): Add simSIGINT support.
547 (sim_warning, sim_error, dotrace, SignalException): Define as stdarg
549 (sim_warning): Delete call to SignalException. Do call printf_filtered
551 (AddressTranslation): Add #ifdef DEBUG around debugging message and
552 a call to sim_warning.
554 Wed Nov 27 11:53:50 1996 Ian Lance Taylor <ian@cygnus.com>
556 * gencode.c (process_instructions): If ! proc64, skip DOUBLEWORD
559 Tue Nov 26 11:53:12 1996 Ian Lance Taylor <ian@cygnus.com>
561 Add support for mips16 (16 bit MIPS implementation):
562 * gencode.c (inst_type): Add mips16 instruction encoding types.
563 (GETDATASIZEINSN): Define.
564 (MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add
565 jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and
567 (MIPS16_DECODE): New table, for mips16 instructions.
568 (bitmap_val): New static function.
569 (struct mips16_op): Define.
570 (mips16_op_table): New table, for mips16 operands.
571 (build_mips16_operands): New static function.
572 (process_instructions): If PC is odd, decode a mips16
573 instruction. Break out instruction handling into new
574 build_instruction function.
575 (build_instruction): New static function, broken out of
576 process_instructions. Check modifiers rather than flags for SHIFT
577 bit count and m[ft]{hi,lo} direction.
578 (usage): Pass program name to fprintf.
579 (main): Remove unused variable this_option_optind. Change
580 ``*loptarg++'' to ``loptarg++''.
581 (my_strtoul): Parenthesize && within ||.
582 * interp.c (LoadMemory): Accept a halfword pAddr if vAddr is odd.
583 (simulate): If PC is odd, fetch a 16 bit instruction, and
584 increment PC by 2 rather than 4.
585 * configure.in: Add case for mips16*-*-*.
586 * configure: Rebuild.
588 Fri Nov 22 08:49:36 1996 Mark Alexander <marka@cygnus.com>
590 * interp.c: Allow -t to enable tracing in standalone simulator.
591 Fix garbage output in trace file and error messages.
593 Wed Nov 20 01:54:37 1996 Doug Evans <dje@canuck.cygnus.com>
595 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
596 (SIM_{OBJS,EXTRA_CFLAGS,EXTRA_CLEAN}): Define.
597 * configure.in: Simplify using macros in ../common/aclocal.m4.
598 * configure: Regenerated.
599 * tconfig.in: New file.
601 Tue Nov 12 13:34:00 1996 Dawn Perchik <dawn@cygnus.com>
603 * interp.c: Fix bugs in 64-bit port.
604 Use ansi function declarations for msvc compiler.
605 Initialize and test file pointer in trace code.
606 Prevent duplicate definition of LAST_EMED_REGNUM.
608 Tue Oct 15 11:07:06 1996 Mark Alexander <marka@cygnus.com>
610 * interp.c (xfer_big_long): Prevent unwanted sign extension.
612 Thu Sep 26 17:35:00 1996 James G. Smith <jsmith@cygnus.co.uk>
614 * interp.c (SignalException): Check for explicit terminating
616 * gencode.c: Pass instruction value through SignalException()
617 calls for Trap, Breakpoint and Syscall.
619 Thu Sep 26 11:35:17 1996 James G. Smith <jsmith@cygnus.co.uk>
621 * interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is
622 only used on those hosts that provide it.
623 * configure.in: Add sqrt() to list of functions to be checked for.
624 * config.in: Re-generated.
625 * configure: Re-generated.
627 Fri Sep 20 15:47:12 1996 Ian Lance Taylor <ian@cygnus.com>
629 * gencode.c (process_instructions): Call build_endian_shift when
630 expanding STORE RIGHT, to fix swr.
631 * support.h (SIGNEXTEND): If the sign bit is not set, explicitly
633 * interp.c (Convert): Fix fmt_single to fmt_long to not truncate.
634 Fix float to int conversions to produce signed values.
636 Thu Sep 19 15:34:17 1996 Ian Lance Taylor <ian@cygnus.com>
638 * gencode.c (MIPS_DECODE): Set UNSIGNED for multu instruction.
639 (process_instructions): Correct handling of nor instruction.
640 Correct shift count for 32 bit shift instructions. Correct sign
641 extension for arithmetic shifts to not shift the number of bits in
642 the type. Fix 64 bit multiply high word calculation. Fix 32 bit
643 unsigned multiply. Fix ldxc1 and friends to use coprocessor 1.
645 * interp.c (CHECKHILO): Don't set HIACCESS, LOACCESS, or HLPC.
646 It's OK to have a mult follow a mult. What's not OK is to have a
648 (Convert): Comment out incorrect rounding code.
650 Mon Sep 16 11:38:16 1996 James G. Smith <jsmith@cygnus.co.uk>
652 * interp.c (sim_monitor): Improved monitor printf
653 simulation. Tidied up simulator warnings, and added "--log" option
654 for directing warning message output.
655 * gencode.c: Use sim_warning() rather than WARNING macro.
657 Thu Aug 22 15:03:12 1996 Ian Lance Taylor <ian@cygnus.com>
659 * Makefile.in (gencode): Depend upon gencode.o, getopt.o, and
660 getopt1.o, rather than on gencode.c. Link objects together.
661 Don't link against -liberty.
662 (gencode.o, getopt.o, getopt1.o): New targets.
663 * gencode.c: Include <ctype.h> and "ansidecl.h".
664 (AND): Undefine after including "ansidecl.h".
665 (ULONG_MAX): Define if not defined.
666 (OP_*): Don't define macros; now defined in opcode/mips.h.
667 (main): Call my_strtoul rather than strtoul.
668 (my_strtoul): New static function.
670 Wed Jul 17 18:12:38 1996 Stu Grossman (grossman@critters.cygnus.com)
672 * gencode.c (process_instructions): Generate word64 and uword64
673 instead of `long long' and `unsigned long long' data types.
674 * interp.c: #include sysdep.h to get signals, and define default
676 * (Convert): Work around for Visual-C++ compiler bug with type
678 * support.h: Make things compile under Visual-C++ by using
679 __int64 instead of `long long'. Change many refs to long long
680 into word64/uword64 typedefs.
682 Wed Jun 26 12:24:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
684 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
685 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
687 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
688 (AC_PROG_INSTALL): Added.
689 (AC_PROG_CC): Moved to before configure.host call.
690 * configure: Rebuilt.
692 Wed Jun 5 08:28:13 1996 James G. Smith <jsmith@cygnus.co.uk>
694 * configure.in: Define @SIMCONF@ depending on mips target.
695 * configure: Rebuild.
696 * Makefile.in (run): Add @SIMCONF@ to control simulator
698 * gencode.c: Change LOADDRMASK to 64bit memory model only.
699 * interp.c: Remove some debugging, provide more detailed error
700 messages, update memory accesses to use LOADDRMASK.
702 Mon Jun 3 11:55:03 1996 Ian Lance Taylor <ian@cygnus.com>
704 * configure.in: Add calls to AC_CONFIG_HEADER, AC_CHECK_HEADERS,
705 AC_CHECK_LIB, and AC_CHECK_FUNCS. Change AC_OUTPUT to set
707 * configure: Rebuild.
708 * config.in: New file, generated by autoheader.
709 * interp.c: Include "config.h". Include <stdlib.h>, <string.h>,
710 and <strings.h> if they exist. Replace #ifdef sun with #ifdef
711 HAVE_ANINT and HAVE_AINT, as appropriate.
712 * Makefile.in (run): Use @LIBS@ rather than -lm.
713 (interp.o): Depend upon config.h.
714 (Makefile): Just rebuild Makefile.
715 (clean): Remove stamp-h.
716 (mostlyclean): Make the same as clean, not as distclean.
717 (config.h, stamp-h): New targets.
719 Fri May 10 00:41:17 1996 James G. Smith <jsmith@cygnus.co.uk>
721 * interp.c (ColdReset): Fix boolean test. Make all simulator
724 Wed May 8 15:12:58 1996 James G. Smith <jsmith@cygnus.co.uk>
726 * interp.c (xfer_direct_word, xfer_direct_long,
727 swap_direct_word, swap_direct_long, xfer_big_word,
728 xfer_big_long, xfer_little_word, xfer_little_long,
729 swap_word,swap_long): Added.
730 * interp.c (ColdReset): Provide function indirection to
731 host<->simulated_target transfer routines.
732 * interp.c (sim_store_register, sim_fetch_register): Updated to
733 make use of indirected transfer routines.
735 Fri Apr 19 15:48:24 1996 James G. Smith <jsmith@cygnus.co.uk>
737 * gencode.c (process_instructions): Ensure FP ABS instruction
739 * interp.c (AbsoluteValue): Add routine. Also provide simple PMON
742 Wed Apr 10 09:51:38 1996 James G. Smith <jsmith@cygnus.co.uk>
744 * interp.c (sim_do_command): Complain if callback structure not
747 Thu Mar 28 13:50:51 1996 James G. Smith <jsmith@cygnus.co.uk>
749 * interp.c (Convert): Provide round-to-nearest and round-to-zero
750 support for Sun hosts.
751 * Makefile.in (gencode): Ensure the host compiler and libraries
752 used for cross-hosted build.
754 Wed Mar 27 14:42:12 1996 James G. Smith <jsmith@cygnus.co.uk>
756 * interp.c, gencode.c: Some more (TODO) tidying.
758 Thu Mar 7 11:19:33 1996 James G. Smith <jsmith@cygnus.co.uk>
760 * gencode.c, interp.c: Replaced explicit long long references with
761 WORD64HI, WORD64LO, SET64HI and SET64LO macro calls.
762 * support.h (SET64LO, SET64HI): Macros added.
764 Wed Feb 21 12:16:21 1996 Ian Lance Taylor <ian@cygnus.com>
766 * configure: Regenerate with autoconf 2.7.
768 Tue Jan 30 08:48:18 1996 Fred Fish <fnf@cygnus.com>
770 * interp.c (LoadMemory): Enclose text following #endif in /* */.
771 * support.h: Remove superfluous "1" from #if.
772 * support.h (CHECKSIM): Remove stray 'a' at end of line.
774 Mon Dec 4 11:44:40 1995 Jamie Smith <jsmith@cygnus.com>
776 * interp.c (StoreFPR): Control UndefinedResult() call on
777 WARN_RESULT manifest.
779 Fri Dec 1 16:37:19 1995 James G. Smith <jsmith@cygnus.co.uk>
781 * gencode.c: Tidied instruction decoding, and added FP instruction
784 * interp.c: Added dineroIII, and BSD profiling support. Also
785 run-time FP handling.
787 Sun Oct 22 00:57:18 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
789 * Changelog, Makefile.in, README.Cygnus, configure, configure.in,
790 gencode.c, interp.c, support.h: created.