1 2003-08-28 Andrew Cagney <cagney@redhat.com>
3 * dv-mn103ser.c (do_polling_event): Change type of "serial_reg" to
5 (read_status_reg): Cast "serial_reg" to "long".
6 * dv-mn103tim.c (do_counter_event): Change type of "timer_nr" to
8 (do_counter6_event, write_mode_reg, write_tm6md): Ditto.
10 2003-02-27 Andrew Cagney <cagney@redhat.com>
12 * interp.c (sim_open, sim_create_inferior, sim_open)
13 (sim_create_inferior): Rename _bfd to bfd.
15 2003-02-26 Andrew Cagney <cagney@redhat.com>
17 * am33.igen: Call sim_engine_abort instead of abort.
19 2003-02-26 David Carlton <carlton@math.stanford.edu>
21 * dv-mn103tim.c (read_special_timer6_reg): Add break after
23 (write_special_timer6_reg): Ditto.
26 2002-11-28 Andrew Cagney <cagney@redhat.com>
28 * sim-main.h: Only include "idecode.h" once.
29 * Makefile.in (SIM_EXTRA_DEPS): Define.
31 2002-06-16 Andrew Cagney <ac131313@redhat.com>
33 * configure: Regenerated to track ../common/aclocal.m4 changes.
35 2002-06-09 Andrew Cagney <cagney@redhat.com>
37 * Makefile.in (INCLUDE): Update path to callback.h.
38 * mn10300_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
41 2001-05-06 Jim Blandy <jimb@redhat.com>
43 * mn10300.igen: Doc fixes.
45 2001-04-26 Alexandre Oliva <aoliva@redhat.com>
47 * Makefile.in (idecode.o, op_utils.o, semantics.o, simops.o):
48 Depend on targ-vals.h.
50 2001-04-15 J.T. Conklin <jtc@redback.com>
52 * Makefile.in (simops.o): Add simops.h to dependency list.
54 Wed Aug 9 02:24:53 2000 Graham Stott <grahams@cygnus.co.uk>
56 * am33.igen: Warning clean-up.
57 (movm): Initialize PC and mask.
58 (mov, movbu, movhu): Set srcreg2 from RI0.
60 (sat16_cmp): Actually do the comparison.
61 (mov_llt): Do not overwrite dstreg with uninitialized variable.
63 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
65 * configure: Regenerated to track ../common/aclocal.m4 changes.
67 2000-05-22 Alexandre Oliva <aoliva@cygnus.com>
69 * am33.igen: Fix leading comments of SP-relative offset insns that
70 referred to other registers. Make their offsets unsigned.
72 2000-05-18 Alexandre Oliva <aoliva@cygnus.com>
74 * mn10300_sim.h (genericAdd, genericSub, genericCmp, genericOr,
75 genericXor, genericBtst): Use `unsigned32'.
76 * op_utils.c: Likewise.
77 * mn10300.igen, am33.igen: Use `unsigned32', `signed32',
78 `unsigned64' or `signed64' where type width is relevant.
80 2000-04-25 Alexandre Oliva <aoliva@cygnus.com>
82 * am33.igen (inc4 Rn): Use genericAdd so as to modify flags.
84 2000-04-09 Alexandre Oliva <aoliva@cygnus.com>
86 * am33.igen: Make SP-relative offsets unsigned. Add `*am33' for
87 some instructions that were missing it.
89 2000-03-03 Alexandre Oliva <oliva@lsd.ic.unicamp.br>
91 * Makefile.in (IGEN_INSN): Added am33.igen.
93 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
95 * configure: Regenerated to track ../common/aclocal.m4 changes.
97 Tue Jul 13 13:26:20 1999 Andrew Cagney <cagney@b1.cygnus.com>
99 * interp.c: Clarify error message reporting an unknown board.
101 1999-05-08 Felix Lee <flee@cygnus.com>
103 * configure: Regenerated to track ../common/aclocal.m4 changes.
105 1999-04-16 Frank Ch. Eigler <fche@cygnus.com>
107 * interp.c (program_interrupt): Detect undesired recursion using
108 static flag. Set NMIRC register's SYSEF flag during
109 --board=stdeval1 mode.
110 * dv-mn103-int.c (write_icr): Add backdoor address to allow CPU to
113 1999-04-02 Keith Seitz <keiths@cygnus.com>
115 * Makefile.in (SIM_EXTRA_CFLAGS): Define a POLL_QUIT_INTERVAL
116 for use in the simulator so that the poll_quit callback is
117 not called too often.
119 Tue Mar 9 21:26:41 1999 Andrew Cagney <cagney@b1.cygnus.com>
121 * dv-mn103int.c (mn103int_ioctl): Return something.
122 * dv-mn103tim.c (write_tm6md): GCC suggested parentheses around &&
125 Tue Feb 16 23:57:17 1999 Jeffrey A Law (law@cygnus.com)
127 * mn10300.igen (retf): Fix return address computation and store
128 the new pc value into nia.
130 1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
132 * Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o.
133 * interp.c (sim_open): Add stub mn103002 cache control memory regions.
134 Set OPERATING_ENVIRONMENT on "stdeval1" board.
135 (mn10300_core_signal): New function to intercept memory errors.
136 (program_interrupt): New function to dispatch to exception vector
137 (mn10300_exception_*): New functions to snapshot pre/post exception
139 * sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal.
140 (SIM_ENGINE_HALT_HOOK): Do nothing.
141 (SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*().
142 (_sim_cpu): Add exc_* fields to store register value snapshots.
143 * dv-mn103ser.c (*): Support dv-sockser backend for UART I/O.
144 Various endianness and warning fixes.
145 * mn10300.igen (illegal): Call program_interrupt on error.
146 (break): Call program_interrupt on breakpoint
148 Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com>
150 * dv-mn103int.c (mn103int_ioctl): New function for NMI
151 generation. (mn103int_finish): Install it as ioctl handler.
152 * dv-mn103tim.c: Support timer 6 specially. Endianness fixes.
154 Wed Oct 14 12:11:05 1998 Jeffrey A Law (law@cygnus.com)
156 * am33.igen: Allow autoincrement stores using the same register
157 for source and destination operands.
159 Mon Aug 31 10:19:55 1998 Jeffrey A Law (law@cygnus.com)
161 * am33.igen: Reverse HI/LO outputs of 4 operand "mul" and "mulu".
163 Fri Aug 28 14:40:49 1998 Joyce Janczyn <janczyn@cygnus.com>
165 * interp.c (sim_open): Check for invalid --board option, fix
166 indentation, allocate memory for mem control and DMA regs.
168 Wed Aug 26 09:29:38 1998 Joyce Janczyn <janczyn@cygnus.com>
170 * mn10300.igen (div,divu): Fix divide instructions so divide by 0
171 behaves like the hardware.
173 Mon Aug 24 11:50:09 1998 Joyce Janczyn <janczyn@cygnus.com>
175 * sim-main.h (SIM_HANDLES_LMA): Define SIM_HANDLES_LMA.
177 Wed Aug 12 12:36:07 1998 Jeffrey A Law (law@cygnus.com)
179 * am33.igen: Handle case where first DSP operation modifies a
180 register used in the second DSP operation correctly.
182 Tue Jul 28 10:10:25 1998 Jeffrey A Law (law@cygnus.com)
184 * am33.igen: Detect cases where two operands must not match for
185 DSP instructions too.
187 Mon Jul 27 12:04:17 1998 Jeffrey A Law (law@cygnus.com)
189 * am33.igen: Detect cases where two operands must not match in
190 non-DSP instructions.
192 Fri Jul 24 18:15:21 1998 Joyce Janczyn <janczyn@cygnus.com>
194 * op_utils.c (do_syscall): Rewrite to use common/syscall.c.
195 (syscall_read_mem, syscall_write_mem): New functions for syscall
197 * mn10300_sim.h: Add prototypes for syscall_read_mem and
199 * mn10300.igen: Change C++ style comments to C style comments.
200 Check for divide by zero in div and divu ops.
202 Fri Jul 24 12:49:28 1998 Jeffrey A Law (law@cygnus.com)
204 * am33.igen (translate_xreg): New function. Use it as needed.
206 Thu Jul 23 10:05:28 1998 Jeffrey A Law (law@cygnus.com)
208 * am33.igen: Add some missing instructions.
210 * am33.igen: Autoincrement loads/store fixes.
212 Tue Jul 21 09:48:14 1998 Jeffrey A Law (law@cygnus.com)
214 * am33.igen: Add mov_lCC DSP instructions.
216 * am33.igen: Add most am33 DSP instructions.
218 Thu Jul 9 10:06:55 1998 Jeffrey A Law (law@cygnus.com)
220 * mn10300.igen: Fix Z bit for addc and subc instructions.
221 Minor fixes in multiply/divide patterns.
223 * am33.igen: Add missing mul[u] imm32,Rn. Fix condition code
224 handling for many instructions. Fix sign extension for some
227 * am33.igen: Fix Z bit for remaining addc/subc instructions.
228 Do not sign extend immediate for mov imm,XRn.
229 More random mul, mac & div fixes.
230 Remove some unused variables.
231 Sign extend 24bit displacement in memory addresses.
233 * am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various
234 fixes to 2 register multiply, divide and mac instructions. Set
235 Z,N correctly for sat16. Sign extend 24 bit immediate for add,
236 and sub instructions.
238 * am33.igen: Add remaining non-DSP instructions.
240 Wed Jul 8 16:29:12 1998 Jeffrey A Law (law@cygnus.com)
242 * am33.igen (translate_rreg): New function. Use it as appropriate.
244 * am33.igen: More am33 instructions. Fix "div".
246 Mon Jul 6 15:39:22 1998 Jeffrey A Law (law@cygnus.com)
248 * mn10300.igen: Add am33 support.
250 * Makefile.in: Use multi-sim to support both a mn10300 and am33
253 * am33.igen: Add many more am33 instructions.
255 Wed Jul 1 17:07:09 1998 Jeffrey A Law (law@cygnus.com)
257 * mn10300_sim.h (FETCH24): Define.
259 * mn10300_sim.h: Add defines for some registers found on the AM33.
260 * am33.igen: New file with some am33 support.
262 Tue Jun 30 11:23:20 1998 Jeffrey A Law (law@cygnus.com)
264 * mn10300_sim.h: Include bfd.h
265 (struct state): Add more room for processor specific registers.
268 Thu Jun 25 10:12:03 1998 Joyce Janczyn <janczyn@cygnus.com>
270 * dv-mn103tim.c: Include sim-assert.h
271 * dv-mn103ser.c (do_polling_event): Check for incoming data on
272 serial line and schedule next polling event.
273 (read_status_reg): schedule events to check for incoming data on
274 serial line and issue interrupt if necessary.
276 Fri Jun 19 16:47:27 1998 Joyce Janczyn <janczyn@cygnus.com>
278 * interp.c (sim_open): hook up serial 1 and 2 ports properly (typo).
280 Fri Jun 19 11:59:26 1998 Joyce Janczyn <janczyn@cygnus.com>
282 * interp.c (board): Rename am32 to stdeval1 as this is the name
283 consistently used to refer to the mn1030002 board.
285 Thu June 18 14:37:14 1998 Joyce Janczyn <janczyn@cygnus.com>
286 * interp.c (sim_open): Fix typo in address of EXTMD register
287 (0x34000280, not 0x3400280).
289 Wed Jun 17 18:00:18 1998 Jeffrey A Law (law@cygnus.com)
291 * simops.c (syscall): Handle change in opcode # for syscall.
292 * mn10300.igen (syscall): Likewise.
294 Tue June 16 09:36:21 1998 Joyce Janczyn <janczyn@cygnus.com>
295 * dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or
296 reset) are not enabled on reset.
298 Sun June 14 17:04:00 1998 Joyce Janczyn <janczyn@cygnus.com>
299 * dv-mn103iop.c (write_*_reg): Check for attempt to write r/o
301 * dv-mn103ser.c: Fill in methods for reading and writing to serial
303 * interp.c (sim_open): Make the serial device a polling device.
305 Fri June 12 16:24:00 1998 Joyce Janczyn <janczyn@cygnus.com>
306 * dv-mn103iop.c: New file for handling am32 io ports.
307 * configure.in: Add mn103iop to hw_device list.
308 * configure: Re-generate.
309 * interp.c (sim_open): Create io port device.
311 Wed June 10 14:34:00 1998 Joyce Janczyn <janczyn@cygnus.com>
312 * dv-mn103int.c (external_group): Use enumerated types to access
313 correct group addresses.
314 * dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
315 triggers an interrupt on the higher-numbered timer's port.
317 Mon June 8 13:30:00 1998 Joyce Janczyn <janczyn@cygnus.com>
318 * interp.c: (mn10300_option_handler): New function parses arguments
320 * (board): Add --board option for specifying am32.
321 * (sim_open): Create new timer and serial devices and control
322 configuration of other am32 devices via board option.
323 * dv-mn103tim.c, dv-mn103ser.c: New files for timers and serial devices.
324 * dv-mn103cpu.c: Fix typos in opening comments.
325 * dv-mn103int.c: Adjust interrupt controller settings for am32 instead of am30.
326 * configure.in: Add mn103tim and mn103ser to hw_device list.
327 * configure: Re-generate.
329 Mon May 25 20:50:35 1998 Andrew Cagney <cagney@b1.cygnus.com>
331 * dv-mn103int.c, dv-mn103cpu.c: Rename *_callback to *_method.
333 * dv-mn103cpu.c, dv-mn103int.c: Include hw-main.h and
334 sim-main.h. Declare a struct hw_descriptor instead of struct
335 hw_device_descriptor.
337 Mon May 25 17:33:33 1998 Andrew Cagney <cagney@b1.cygnus.com>
339 * dv-mn103cpu.c (struct mn103cpu): Change type of pending_handler
342 Fri May 22 12:17:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
344 * configure.in (SIM_AC_OPTION_HARDWARE): Add argument "yes".
346 Wed May 6 13:29:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
348 * interp.c (sim_open): Create a polling PAL device.
350 Fri May 1 16:39:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
352 * dv-mn103int.c (mn103int_port_event):
353 (mn103int_port_event):
354 (mn103int_io_read_buffer):
355 (mn103int_io_write_buffer):
357 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Drop CPU/CIA args.
358 (mn103cpu_port_event): Ditto.
359 (mn103cpu_io_read_buffer): Ditto.
360 (mn103cpu_io_write_buffer): Ditto.
362 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
364 * configure: Regenerated to track ../common/aclocal.m4 changes.
366 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
368 * configure: Regenerated to track ../common/aclocal.m4 changes.
371 Sun Apr 26 15:19:55 1998 Tom Tromey <tromey@cygnus.com>
373 * acconfig.h: New file.
374 * configure.in: Reverted change of Apr 24; use sinclude again.
376 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
378 * configure: Regenerated to track ../common/aclocal.m4 changes.
381 Fri Apr 24 11:19:07 1998 Tom Tromey <tromey@cygnus.com>
383 * configure.in: Don't call sinclude.
385 Tue Apr 14 10:03:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
387 * mn10300_sim.h: Declare all functions in op_utils.c using
390 * sim-main.c: New file. Include op_utils.c.
392 * mn10300.igen (mov, cmp): Use new igen operators `!' and `=' to
393 differentiate between MOV/CMP immediate/register instructions.
395 * configure.in (SIM_AC_OPTION_INLINE): Add and enable.
396 * configure: Regenerate.
398 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
400 * configure: Regenerated to track ../common/aclocal.m4 changes.
402 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
404 * interp.c (hw): Delete variable, moved to SIM_DESC.
405 (sim_open): Delete calls to hw_tree_create, hw_tree_finish.
406 Handled by sim-module.
407 (sim_open): Do not anotate tree with trace properties, handled by
409 (sim_open): Call sim_hw_parse instead of hw_tree_parse.
411 * configure: Regenerated to track ../common/aclocal.m4 changes.
413 Thu Mar 26 20:46:18 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
415 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Save the entire PC
416 on the stack when delivering interrupts (not just the lower
418 * mn10300.igen (mov (Di,Am),Dn): Fix decode. Registers were
419 specified in the wrong order.
421 Fri Mar 27 00:56:40 1998 Andrew Cagney <cagney@b1.cygnus.com>
423 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Stop loss of
424 succeeding interrupts, clear pending_handler when the handler
427 Thu Mar 26 10:11:01 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
429 * Makefile.in (tmp-igen): Prefix all usage of move-if-change
430 script with $(SHELL) to make NT native builds happy.
431 * configure: Regenerate because of change to ../common/aclocal.m4.
433 Thu Mar 26 11:22:31 1998 Andrew Cagney <cagney@b1.cygnus.com>
435 * configure.in: Make --enable-sim-common the default.
436 * configure: Re-generate.
438 * sim-main.h (CIA_GET, CIA_SET): Save/restore current instruction
439 address into Sate.regs[REG_PC] instead of common struct.
441 Wed Mar 25 17:42:00 1998 Joyce Janczyn <janczyn@cygnus.com>
443 * mn10300.igen (cmp imm8,An): Do not sign extend imm8 value.
445 Wed Mar 25 12:08:00 1998 Joyce Janczyn <janczyn@cygnus.com>
447 * simops.c (OP_F0FD): Initialise variable 'sp'.
449 Thu Mar 26 00:21:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
451 * dv-mn103int.c (decode_group): A group register every 4 bytes not
453 (write_icr): Rewrite equation updating request field.
454 (read_iagr): Fix check that interrupt is still pending.
456 Wed Mar 25 16:14:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
458 * interp.c (sim_open): Tidy up device creation.
460 * dv-mn103int.c (mn103int_port_event): Drive NMI with non-zero
462 (mn103int_io_read_buffer): Convert absolute address to register
464 (read_icr, write_icr): Convert block offset into group offset.
466 Wed Mar 25 15:08:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
468 * interp.c (sim_open): Create second 1mb memory region at
470 (sim_open): Create a device tree.
472 (do_interrupt): Delete, needs to use dv-mn103cpu.c
474 * dv-mn103int.c, dv-mn103cpu.c: New files.
476 Wed Mar 25 08:47:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
478 * mn10300_sim.h (EXTRACT_PSW_LM, INSERT_PSW_LM, PSW_IE, PSW_LM):
482 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
484 * configure: Regenerated to track ../common/aclocal.m4 changes.
486 Wed Mar 25 10:24:48 1998 Andrew Cagney <cagney@b1.cygnus.com>
488 * interp.c (sim-options.h): Include.
489 (sim_kind, myname): Declare when not using common framework.
491 * mn10300_sim.h (do_syscall, generic*): Provide prototypes for
492 functions found in op_utils.c
494 * mn10300.igen (add): Discard unused variables.
496 * configure, config.in: Re-generate with autoconf 2.12.1.
498 Tue Mar 24 15:27:00 1998 Joyce Janczyn <janczyn@cygnus.com>
500 Add support for --enable-sim-common option.
501 * Makefile.in (WITHOUT_COMMON_OBJS): Files included if
502 ! --enable-sim-common
503 (WITH_COMMON_OBJS): Files included if --enable-sim-common.
504 (MN10300_OBJS,MN10300_INTERP_DEP): New variables.
506 ({WITHOUT,WITH}_COMMON_RUN_OBJS,SIM_RUN_OBJS): New variables.
507 (SIM_EXTRA_CFLAGS): New variable.
508 (clean-extra): Clean up igen files.
509 (../igen/igen,clean-igen,tmp-igen): New rules.
510 * configure.in: Add support for common framework via
512 * configure: Regenerate.
513 * interp.c: #include sim-main if WITH_COMMON, not mn10300_sim.h.
514 (hash,dispatch,sim_size): Don't compile if ! WITH_COMMON.
515 (init_system,sim_write,compare_simops): Likewise.
516 (sim_set_profile,sim_set_profile_size): Likewise.
517 (sim_stop,sim_resume,sim_trace,sim_info): Likewise.
518 (sim_set_callbacks,sim_stop_reason,sim_read,sim_load): Likewise.
519 (enum interrupt_type): New enum.
520 (interrupt_names): New global.
521 (do_interrupt): New function.
522 (sim_open): Define differently if WITH_COMMON.
523 (sim_close,sim_create_inferior,sim_do_command): Likewise.
524 * mn10300_sim.h ({load,store}_{byte,half,word}): Define versions
526 * mn10300.igen: New file.
527 * mn10300.dc: New file.
528 * op_utils.c: New file.
529 * sim-main.h: New file.
531 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
533 * configure: Regenerated to track ../common/aclocal.m4 changes.
535 Fri Feb 27 18:36:04 1998 Jeffrey A Law (law@cygnus.com)
537 * simops.c (inc): Fix typo.
539 Wed Feb 25 01:59:29 1998 Jeffrey A Law (law@cygnus.com)
541 * simops.c (signed multiply instructions): Cast input operands to
542 signed32 before casting them to signed64 so that the sign bit
543 is propagated properly.
545 Mon Feb 23 20:23:19 1998 Mark Alexander <marka@cygnus.com>
547 * Makefile.in: Last change was bad. Define NL_TARGET
548 so that targ-vals.h will be used instead of syscall.h.
549 * simops.c: Use targ-vals.h instead of syscall.h.
550 (OP_F020): Disable unsupported system calls.
552 Mon Feb 23 09:44:38 1998 Mark Alexander <marka@cygnus.com>
554 * Makefile.in: Get header files from libgloss/mn10300/sys.
556 Sun Feb 22 16:02:24 1998 Jeffrey A Law (law@cygnus.com)
558 * simops.c: Include sim-types.h.
560 Wed Feb 18 13:07:08 1998 Jeffrey A Law (law@cygnus.com)
562 * simops.c (multiply instructions): Cast input operands to a
563 signed64/unsigned64 type as appropriate.
565 Tue Feb 17 12:47:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
567 * interp.c (sim_store_register, sim_fetch_register): Pass in
568 length parameter. Return -1.
570 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
572 * configure: Regenerated to track ../common/aclocal.m4 changes.
574 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
576 * configure: Regenerated to track ../common/aclocal.m4 changes.
578 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
580 * configure: Regenerated to track ../common/aclocal.m4 changes.
582 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
584 * configure: Regenerated to track ../common/aclocal.m4 changes.
587 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
589 * configure: Regenerated to track ../common/aclocal.m4 changes.
591 Tue Nov 11 10:38:52 1997 Jeffrey A Law (law@cygnus.com)
593 * simops.c (call:16 call:32): Stack adjustment is determined solely
596 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
598 * interp.c (sim_load): Pass lma_p and sim_write args to
601 Tue Oct 21 10:12:03 1997 Jeffrey A Law (law@cygnus.com)
603 * simops.c: Correctly handle register restores for "ret" and "retf"
606 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
608 * configure: Regenerated to track ../common/aclocal.m4 changes.
610 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
612 * configure: Regenerated to track ../common/aclocal.m4 changes.
614 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
616 * configure: Regenerated to track ../common/aclocal.m4 changes.
618 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
620 * configure: Regenerated to track ../common/aclocal.m4 changes.
622 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
624 * configure: Regenerated to track ../common/aclocal.m4 changes.
626 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
628 * configure: Regenerated to track ../common/aclocal.m4 changes.
630 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
632 * configure: Regenerated to track ../common/aclocal.m4 changes.
634 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
636 * configure: Regenerated to track ../common/aclocal.m4 changes.
639 Tue Aug 26 10:41:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
641 * interp.c (sim_kill): Delete.
642 (sim_create_inferior): Add ABFD argument.
643 (sim_load): Move setting of PC from here.
644 (sim_create_inferior): To here.
646 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
648 * configure: Regenerated to track ../common/aclocal.m4 changes.
651 Mon Aug 25 16:14:44 1997 Andrew Cagney <cagney@b1.cygnus.com>
653 * interp.c (sim_open): Add ABFD argument.
655 Tue Jun 24 13:46:20 1997 Jeffrey A Law (law@cygnus.com)
657 * interp.c (sim_resume): Clear State.exited.
658 (sim_stop_reason): If State.exited is nonzero, then indicate that
659 the simulator exited instead of stopped.
660 * mn10300_sim.h (struct _state): Add exited field.
661 * simops.c (syscall): Set State.exited for SYS_exit.
663 Wed Jun 11 22:07:56 1997 Jeffrey A Law (law@cygnus.com)
665 * simops.c: Fix thinko in last change.
667 Tue Jun 10 12:31:32 1997 Jeffrey A Law (law@cygnus.com)
669 * simops.c: "call" stores the callee saved registers into the
670 stack! Update the stack pointer properly when done with
673 * simops.c: Fix return address computation for "call" instructions.
675 Thu May 22 01:43:11 1997 Jeffrey A Law (law@cygnus.com)
677 * interp.c (sim_open): Fix typo.
679 Wed May 21 23:27:58 1997 Jeffrey A Law (law@cygnus.com)
681 * interp.c (sim_resume): Add missing case in big switch
682 statement (for extb instruction).
684 Tue May 20 17:51:30 1997 Jeffrey A Law (law@cygnus.com)
686 * interp.c: Replace all references to load_mem and store_mem
687 with references to load_byte, load_half, load_3_byte, load_word
688 and store_byte, store_half, store_3_byte, store_word.
689 (INLINE): Delete definition.
690 (load_mem_big): Likewise.
691 (max_mem): Make it global.
692 (dispatch): Make this function inline.
693 (load_mem, store_mem): Delete functions.
694 * mn10300_sim.h (INLINE): Define.
695 (RLW): Delete unused definition.
696 (load_mem, store_mem): Delete declarations.
697 (load_mem_big): New definition.
698 (load_byte, load_half, load_3_byte, load_word): New functions.
699 (store_byte, store_half, store_3_byte, store_word): New functions.
700 * simops.c: Replace all references to load_mem and store_mem
701 with references to load_byte, load_half, load_3_byte, load_word
702 and store_byte, store_half, store_3_byte, store_word.
704 Tue May 20 10:21:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
706 * interp.c (sim_open): Add callback to arguments.
707 (sim_set_callbacks): Delete SIM_DESC argument.
709 Mon May 19 13:54:22 1997 Jeffrey A Law (law@cygnus.com)
711 * interp.c (dispatch): Make this an inline function.
713 * simops.c (syscall): Use callback->write regardless of
714 what file descriptor we're writing too.
716 Sun May 18 16:46:31 1997 Jeffrey A Law (law@cygnus.com)
718 * interp.c (load_mem_big): Remove function. It's now a macro
720 (compare_simops): New function.
721 (sim_open): Sort the Simops table before inserting entries
723 * mn10300_sim.h: Remove unused #defines.
724 (load_mem_big): Define.
726 Fri May 16 16:36:17 1997 Jeffrey A Law (law@cygnus.com)
728 * interp.c (load_mem): If we get a load from an out of range
730 (store_mem): Likewise for stores.
731 (max_mem): New variable.
733 Tue May 6 13:24:36 1997 Jeffrey A Law (law@cygnus.com)
735 * mn10300_sim.h: Fix ordering of bits in the PSW.
737 * interp.c: Improve hashing routine to avoid long list
738 traversals for common instructions. Add HASH_STAT support.
739 Rewrite opcode dispatch code using a big switch instead of
740 cascaded if/else statements. Avoid useless calls to load_mem.
742 Mon May 5 18:07:48 1997 Jeffrey A Law (law@cygnus.com)
744 * mn10300_sim.h (struct _state): Add space for mdrq register.
746 * simops.c: Don't abort for trap. Add support for the extended
747 instructions, "getx", "putx", "mulq", "mulqu", "sat16", "sat24",
750 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
752 * configure: Regenerated to track ../common/aclocal.m4 changes.
754 Fri Apr 18 14:04:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
756 * interp.c (sim_stop): Add stub function.
758 Thu Apr 17 03:26:59 1997 Doug Evans <dje@canuck.cygnus.com>
760 * Makefile.in (SIM_OBJS): Add sim-load.o.
761 * interp.c (sim_kind, myname): New static locals.
762 (sim_open): Set sim_kind, myname. Ignore -E arg.
763 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
764 load file into simulator. Set start address from bfd.
765 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
767 Wed Apr 16 19:30:44 1997 Andrew Cagney <cagney@b1.cygnus.com>
769 * simops.c (OP_F020): SYS_execv, SYS_time, SYS_times, SYS_utime
770 only include if implemented by host.
771 (OP_F020): Typecast arg passed to time function;
773 Mon Apr 7 23:57:49 1997 Jeffrey A Law (law@cygnus.com)
775 * simops.c (syscall): Handle new mn10300 calling conventions.
777 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
779 * configure: Regenerated to track ../common/aclocal.m4 changes.
782 Fri Apr 4 20:02:37 1997 Ian Lance Taylor <ian@cygnus.com>
784 * Makefile.in: Change mn10300-opc.o to m10300-opc.o, to match
785 corresponding change in opcodes directory.
787 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
789 * interp.c (sim_open): New arg `kind'.
791 * configure: Regenerated to track ../common/aclocal.m4 changes.
793 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
795 * configure: Regenerated to track ../common/aclocal.m4 changes.
797 Thu Mar 20 11:58:02 1997 Jeffrey A Law (law@cygnus.com)
799 * simops.c: Fix register extraction for a two "movbu" variants.
800 Somewhat simplify "sub" instructions.
801 Correctly sign extend operands for "mul". Put the correct
802 half of the result in MDR for "mul" and "mulu".
803 Implement remaining instructions.
804 Tweak opcode for "syscall".
806 Tue Mar 18 14:21:21 1997 Jeffrey A Law (law@cygnus.com)
808 * simops.c: Do syscall emulation in "syscall" instruction. Add
809 dummy "trap" instruction.
811 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
813 * configure: Regenerated to track ../common/aclocal.m4 changes.
815 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
817 * configure: Re-generate.
819 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
821 * configure: Regenerate to track ../common/aclocal.m4 changes.
823 Thu Mar 13 12:54:45 1997 Doug Evans <dje@canuck.cygnus.com>
825 * interp.c (sim_open): New SIM_DESC result. Argument is now
827 (other sim_*): New SIM_DESC argument.
829 Wed Mar 12 15:04:00 1997 Jeffrey A Law (law@cygnus.com)
831 * simops.c: Fix carry bit computation for "add" instructions.
833 * simops.c: Fix typos in bset insns. Fix arguments to store_mem
834 for bset imm8,(d8,an) and bclr imm8,(d8,an).
836 Wed Mar 5 15:00:10 1997 Jeffrey A Law (law@cygnus.com)
838 * simops.c: Fix register references when computing Z and N bits
841 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
843 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
844 COMMON_{PRE,POST}_CONFIG_FRAG instead.
845 * configure.in: sinclude ../common/aclocal.m4.
846 * configure: Regenerated.
848 Fri Jan 24 10:47:25 1997 Jeffrey A Law (law@cygnus.com)
850 * interp.c (init_system): Allocate 2^19 bytes of space for the
853 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
855 * configure configure.in Makefile.in: Update to new configure
856 scheme which is more compatible with WinGDB builds.
857 * configure.in: Improve comment on how to run autoconf.
858 * configure: Re-run autoconf to get new ../common/aclocal.m4.
859 * Makefile.in: Use autoconf substitution to install common
862 Tue Jan 21 15:03:04 1997 Jeffrey A Law (law@cygnus.com)
864 * simops.c: Undo last change to "rol" and "ror", original code
867 Thu Jan 16 11:28:14 1997 Jeffrey A Law (law@cygnus.com)
869 * simops.c: Fix "rol" and "ror".
871 Wed Jan 15 06:45:58 1997 Jeffrey A Law (law@cygnus.com)
873 * simops.c: Fix typo in last change.
875 Mon Jan 13 13:22:35 1997 Jeffrey A Law (law@cygnus.com)
877 * simops.c: Use REG macros in few places not using them yet.
879 Mon Jan 6 16:21:19 1997 Jeffrey A Law (law@cygnus.com)
881 * mn10300_sim.h (struct _state): Fix number of registers!
883 Tue Dec 31 16:20:41 1996 Jeffrey A Law (law@cygnus.com)
885 * mn10300_sim.h (struct _state): Put all registers into a single
886 array to make gdb implementation easier.
887 (REG_*): Add definitions for all registers in the state array.
888 (SEXT32, SEXT40, SEXT44, SEXT60): Remove unused macros.
889 * simops.c: Related changes.
891 Wed Dec 18 10:10:45 1996 Jeffrey A Law (law@cygnus.com)
893 * interp.c (sim_resume): Handle 0xff as a single byte insn.
895 * simops.c: Fix overflow computation for "add" and "inc"
898 Mon Dec 16 10:03:52 1996 Jeffrey A Law (law@cygnus.com)
900 * simops.c: Handle "break" instruction.
902 * simops.c: Fix restoring the PC for "ret" and "retf" instructions.
904 Wed Dec 11 09:53:10 1996 Jeffrey A Law (law@cygnus.com)
906 * gencode.c (write_opcodes): Also write out the format of the
908 * mn10300_sim.h (simops): Add "format" field.
909 * interp.c (sim_resume): Deal with endianness issues here.
911 Tue Dec 10 15:05:37 1996 Jeffrey A Law (law@cygnus.com)
913 * simops.c (REG0_4): Define.
914 Use REG0_4 for indexed loads/stores.
916 Sat Dec 7 09:50:28 1996 Jeffrey A Law (law@cygnus.com)
918 * simops.c (REG0_16): Fix typo.
920 Fri Dec 6 14:13:34 1996 Jeffrey A Law (law@cygnus.com)
922 * simops.c: Call abort for any instruction that's not currently
925 * simops.c: Define accessor macros to extract register
926 values from instructions. Use them consistently.
928 * interp.c: Delete unused global variable "OP".
929 (sim_resume): Remove unused variable "opcode".
930 * simops.c: Fix some uninitialized variable problems, add
931 parens to fix various -Wall warnings.
933 * gencode.c (write_header): Add "insn" and "extension" arguments
934 to the OP_* declarations.
935 (write_template): Similarly for function templates.
936 * interp.c (insn, extension): Remove global variables. Instead
937 pass them as arguments to the OP_* functions.
938 * mn10300_sim.h: Remove decls for "insn" and "extension".
939 * simops.c (OP_*): Accept "insn" and "extension" as arguments
940 instead of using globals.
942 Thu Dec 5 22:26:31 1996 Jeffrey A Law (law@cygnus.com)
944 * simops.c: Fix typos in "mov am,(d16,an)" and "mov am,(d32,an)"
946 * simops.c: Fix thinkos in last change to "inc dn".
948 Wed Dec 4 10:57:53 1996 Jeffrey A Law (law@cygnus.com)
950 * simops.c: "add imm,sp" does not effect the condition codes.
951 "inc dn" does effect the condition codes.
953 Tue Dec 3 17:37:45 1996 Jeffrey A Law (law@cygnus.com)
955 * simops.c: Treat both operands as signed values for
958 * simops.c: Fix simulation of division instructions.
959 Fix typos/thinkos in several "cmp" and "sub" instructions.
961 Mon Dec 2 12:31:40 1996 Jeffrey A Law (law@cygnus.com)
963 * simops.c: Fix carry bit handling in "sub" and "cmp"
966 * simops.c: Fix "mov imm8,an" and "mov imm16,dn".
968 Sun Dec 1 16:05:42 1996 Jeffrey A Law (law@cygnus.com)
970 * simops.c: Fix overflow computation for many instructions.
972 * simops.c: Fix "mov dm, an", "movbu dm, (an)", and "movhu dm, (an)".
974 * simops.c: Fix "mov am, dn".
976 * simops.c: Fix more bugs in "add imm,an" and
979 Wed Nov 27 09:20:42 1996 Jeffrey A Law (law@cygnus.com)
981 * simops.c: Fix bugs in "movm" and "add imm,an".
983 * simops.c: Don't lose the upper 24 bits of the return
984 pointer in "call" and "calls" instructions. Rough cut
985 at emulated system calls.
987 * simops.c: Implement the remaining 5, 6 and 7 byte instructions.
989 * simops.c: Implement remaining 4 byte instructions.
991 * simops.c: Implement remaining 3 byte instructions.
993 * simops.c: Implement remaining 2 byte instructions. Call
994 abort for instructions we're not implementing now.
996 Tue Nov 26 15:43:41 1996 Jeffrey A Law (law@cygnus.com)
998 * simops.c: Implement lots of random instructions.
1000 * simops.c: Implement "movm" and "bCC" insns.
1002 * mn10300_sim.h (_state): Add another register (MDR).
1004 * simops.c: Implement "cmp", "calls", "rets", "jmp" and
1005 a few additional random insns.
1007 * mn10300_sim.h (PSW_*): Define for CC status tracking.
1008 (REG_D0, REG_A0, REG_SP): Define.
1009 * simops.c: Implement "add", "addc" and a few other random
1012 * gencode.c, interp.c: Snapshot current simulator code.
1014 Mon Nov 25 12:46:38 1996 Jeffrey A Law (law@cygnus.com)
1016 * Makefile.in, config.in, configure, configure.in: New files.
1017 * gencode.c, interp.c, mn10300_sim.h, simops.c: New files.