sim/msp430/ChangeLog

   1 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * configure: Regenerate.
   4
   5 2021-04-12  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * msp430-sim.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
   8
   9 2021-04-02  Mike Frysinger  <vapier@gentoo.org>
  10
  11         * aclocal.m4, configure: Regenerate.
  12
  13 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
  14
  15         * configure: Regenerate.
  16
  17 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
  18
  19         * Makefile.in (SIM_EXTRA_LIBDEPS): Delete.
  20
  21 2021-02-27  Mike Frysinger  <vapier@gentoo.org>
  22
  23         * Makefile.in (SIM_EXTRA_ALL): Delete.
  24
  25 2021-02-21  Mike Frysinger  <vapier@gentoo.org>
  26
  27         * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
  28         * aclocal.m4, configure: Regenerate.
  29
  30 2021-02-13  Mike Frysinger  <vapier@gentoo.org>
  31
  32         * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
  33         * aclocal.m4, configure: Regenerate.
  34
  35 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
  36
  37         * configure: Regenerate.
  38
  39 2021-01-11  Mike Frysinger  <vapier@gentoo.org>
  40
  41         * config.in, configure: Regenerate.
  42
  43 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
  44
  45         * configure: Regenerate.
  46
  47 2021-01-08  Mike Frysinger  <vapier@gentoo.org>
  48
  49         * configure: Regenerate.
  50
  51 2021-01-04  Mike Frysinger  <vapier@gentoo.org>
  52
  53         * configure: Regenerate.
  54
  55 2020-08-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>
  56
  57         * msp430-sim.c (sim_open): Increase the size of the main memory region
  58         to 0xFAC0.
  59
  60 2020-08-05  Jozef Lawrynowicz  <jozef.l@mittosystems.com>
  61
  62         * msp430-sim.c (put_op): For unsigned multiplication, explicitly cast
  63         operands to the unsigned type before multiplying.
  64         * msp430-sim.h (struct msp430_cpu_state): Fix types used to store hwmult
  65         operands.
  66
  67 2020-01-22  Jozef Lawrynowicz  <jozef.l@mittosystems.com>
  68
  69         * msp430-sim.c (msp430_step_once): Ignore the carry flag when executing
  70         an RRC instruction, if the ZC bit of the extension word is set.
  71
  72 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
  73
  74         * configure: Regenerate.
  75
  76 2017-08-29  Jozef Lawrynowicz  <jozef.l@somniumtech.com>
  77
  78         * sim/msp430/msp430-sim.c (maybe_perform_syscall): Fix passing of
  79         arguments for variadic syscall "open".
  80
  81 2016-08-15  Mike Frysinger  <vapier@gentoo.org>
  82
  83         * msp430-sim.c: Delete bfd.h include.
  84         (lookup_symbol, msp430_sim_close): Delete.
  85         (sim_open): Change lookup_symbol to trace_sym_value.
  86         * sim-main.h (struct sim_state): Delete symbol_table and
  87         number_of_symbols.
  88         (STATE_SYMBOL_TABLE, STATE_NUM_SYMBOLS, msp430_sim_close,
  89         SIM_CLOSE_HOOK): Delete.
  90
  91 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  92
  93         * config.in, configure: Regenerate.
  94
  95 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  96
  97         * configure: Regenerate.
  98
  99 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 100
 101         * configure: Regenerate.
 102
 103 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 104
 105         * configure: Regenerate.
 106
 107 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 108
 109         * configure: Regenerate.
 110
 111 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 112
 113         * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
 114         * configure: Regenerate.
 115
 116 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 117
 118         * configure: Regenerate.
 119
 120 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 121
 122         * configure: Regenerate.
 123
 124 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 125
 126         * config.in, configure: Regenerate.
 127
 128 2016-01-06  Mike Frysinger  <vapier@gentoo.org>
 129
 130         * msp430-sim.c (sim_open): Mark argv const.
 131         (sim_create_inferior): Mark argv and env const.
 132
 133 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
 134
 135         * msp430-sim.c (loader_write_mem): Delete.
 136         (lookup_symbol): Return -1 when abfd is NULL.
 137         (sim_open): Delete prog_bfd variable.  Delete call to sim_load_file.
 138         Delete prog_bfd check.
 139
 140 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
 141
 142         * Makefile.in (SIM_OBJS): Delete trace.o.
 143         * msp430-sim.c: Delete dis-asm.h and trace.h includes.
 144         (sim_open): Delete msp430_trace_init call.
 145         (msp430_dis_read): Delete function.
 146         (msp430_step_once): Replace disassembly logic with a call
 147         to TRACE_DISASM.
 148         * trace.c, trace.h: Delete files.
 149
 150 2016-01-04  Mike Frysinger  <vapier@gentoo.org>
 151
 152         * configure: Regenerate.
 153
 154 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 155
 156         * config.in, configure: Regenerate.
 157
 158 2016-01-02  Mike Frysinger  <vapier@gentoo.org>
 159
 160         * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
 161         LITTLE.
 162         * configure: Regenerate.
 163
 164 2015-12-27  Mike Frysinger  <vapier@gentoo.org>
 165
 166         * msp430-sim.c (sim_dis_read): Change private_data to application_data.
 167         (msp430_step_once): Likewise.
 168
 169 2015-12-27  Mike Frysinger  <vapier@gentoo.org>
 170
 171         * Makefile.in (SIM_OBJS): Delete sim-hload.o.
 172
 173 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 174
 175         * config.in, configure: Regenerate.
 176
 177 2015-12-15  Dominik Vogt  <vogt@linux.vnet.ibm.com>
 178
 179         * msp430-sim.c (get_op, put_op): Fix left shift of negative value.
 180
 181 2015-12-07  Nick Clifton  <nickc@redhat.com>
 182
 183         * msp430-sim.c (sim_open): Check for needed memory at address
 184         0x500 not 0x200.
 185         (get_op): Add support for F5 hardware multiply addresses.
 186         (put_op): Likewise.
 187
 188 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
 189
 190         * Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
 191         sim-stop.o.
 192
 193 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
 194
 195         * interp.c (sim_close): Rename to ...
 196         (msp430_sim_close): ... this.  Delete call to sim_state_free.
 197         * sim-main.h (msp430_sim_close): Declare.
 198         (SIM_CLOSE_HOOK): Define.
 199
 200 2015-06-24  Mike Frysinger  <vapier@gentoo.org>
 201
 202         * msp430-sim.c (trace_reg_put): Change TRACE_VPU to TRACE_REGISTER.
 203         (trace_reg_get): Likewise.
 204
 205 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 206
 207         * configure: Regenerate.
 208
 209 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 210
 211         * msp430-sim.c (maybe_perform_syscall): Replace call to cb_syscall
 212         with sim_syscall.
 213
 214 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 215
 216         * msp430-sim.c: Include sim-syscall.h.
 217         (syscall_read_mem, syscall_write_mem): Delete.
 218         (maybe_perform_syscall): Change syscall_read_mem/syscall_write_mem
 219         to sim_syscall_read_mem/sim_syscall_write_mem.
 220
 221 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 222
 223         * configure: Regenerate.
 224
 225 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 226
 227         * configure: Regenerate.
 228
 229 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 230
 231         * msp430-sim.c (trace_reg_put): Replace TRACE_VPU_P/trace_generic
 232         with TRACE_VPU.
 233         (trace_reg_get): Likewise.
 234         (get_op): Replace TRACE_MEMORY_P/trace_generic with TRACE_MEMORY.
 235         (put_op): Likewise.
 236         (msp430_dis_read): Replace TRACE_ALU_P/trace_generic with TRACE_ALU.
 237         (do_flags): Likewise.
 238         (maybe_perform_syscall): Replace TRACE_SYSCALL_P/trace_generic with
 239         TRACE_SYSCALL.
 240         (msp430_step_once): Replace TRACE_ALU_P/trace_generic with TRACE_ALU.
 241         Replace TRACE_BRANCH_P/trace_generic with TRACE_BRANCH.
 242
 243 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 244
 245         * sim-main.h (MAYBE_TRACE, TRACE_INSN, TRACE_DECODE, TRACE_EXTRACT,
 246         TRACE_SYSCALL, TRACE_CORE, TRACE_EVENTS, TRACE_BRANCH,
 247         trace_register, TRACE_REGISTER, TRACE_REG): Delete.
 248
 249 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 250
 251         * sim-main.h (SIM_CPU): Delete.
 252
 253 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 254
 255         * sim-main.h (sim_cia): Delete.
 256
 257 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
 258
 259         * sim-main.h (CIA_GET, CIA_SET): Delete.
 260
 261 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
 262
 263         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
 264         * sim-main.h (STATE_CPU): Delete.
 265
 266 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 267
 268         * configure: Regenerate.
 269
 270 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
 271
 272         * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
 273
 274 2015-04-01  Mike Frysinger  <vapier@gentoo.org>
 275
 276         * Makefile.in (SIM_OBJS): Delete $(SIM_EXTRA_OBJS).
 277
 278 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 279
 280         * config.in, configure: Regenerate.
 281
 282 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 283
 284         * sim-main.h: Delete run-sim.h include.
 285
 286 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 287
 288         * config.in, configure: Regenerate.
 289
 290 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 291
 292         * aclocal.m4, configure: Regenerate.
 293         * configure.ac: Call the common inline & warning macros.
 294         * msp430-sim.c: Include unistd.h & trace.h.
 295         * trace.c: Include trace.h.
 296         (load_file_and_line): Move FILE* decl to top of scope.
 297         * trace.h (msp430_get_current_source_location): Adjust prototype to
 298         match the function definition.
 299
 300 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 301
 302         * Makefile.in (SIM_RUN_OBJS): Delete.
 303
 304 2015-02-24  Nick Clifton  <nickc@redhat.com>
 305
 306         * msp430-sim.c (sim_open): Allocate memory regions matching those
 307         declared in the libgloss/msp430 linker scripts.
 308         Allow sim_load_file to fail.
 309         (get_op): Test the correct address bit when checking for out of
 310         range addresses.
 311         Include the address in the error message when an illegal access to
 312         the hardware multiplier is detected.
 313         (put_op): Test the correct address bit when checking for out of
 314         range addresses.
 315
 316 2014-08-19  Alan Modra  <amodra@gmail.com>
 317
 318         * configure: Regenerate.
 319
 320 2014-08-19  Nick Clifton  <nickc@redhat.com>
 321
 322         * msp430-sim.c: Move static hardware multiply support variables
 323         from here...
 324         * msp430-sim.h (msp430_cpu_state): ... into here ...
 325         * msp430-sim.c (get_op, put_op): ... and update references to use
 326         the msp430_cpu_state structure.
 327
 328 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 329
 330         * configure: Regenerate.
 331         * config.in: Regenerate.
 332
 333 2014-06-03  Nick Clifton  <nickc@redhat.com>
 334
 335         * msp430-sim.c (get_op): Handle reads of low result register when
 336         in MAC mode.
 337         (put_op): Copy MAC result into result words.
 338         Handle writes to the low result register.
 339
 340 2014-05-12  DJ Delorie  <dj@redhat.com>
 341
 342         * msp43-sim.c (sign_ext): Change to "long long" to support
 343         sign-extending 32-bit values.
 344
 345 2014-05-08  Nick Clifton  <nickc@redhat.com>
 346
 347         * msp430-sim.c (sim_open): Do not allocate memory over the
 348         hardware multiply registers.
 349         (get_op): Add support for reads from the hardware multiply
 350         registers.
 351         (put_op): Add support for writes to the hardware multiply
 352         registers.
 353         (msp430_step_once): Add support for the RETI instruction used by
 354         the CPUX architecture.
 355
 356 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 357
 358         * msp430-sim.c (sim_create_inferior): Set new_pc to the result of
 359         bfd_get_start_address when abfd is not NULL and new_pc is zero.
 360
 361 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 362
 363         * msp430-sim (maybe_perform_syscall): Change %d to %ld.
 364         (msp430_step_once): Cast fprintf to fprintf_ftype.
 365
 366 2013-09-23  Alan Modra  <amodra@gmail.com>
 367
 368         * aclocal.m4, configure: Regenerate.
 369
 370 2013-06-21  Nick Clifton  <nickc@redhat.com>
 371
 372         * Makefile.in: New.
 373         * aclocal.m4: Generate.
 374         * config.in: Generate.
 375         * configure.ac: New.
 376         * configure: Generate.
 377         * msp430-sim.c: New.
 378         * msp430-sim.h: New.
 379         * sim-main.h: New.
 380         * trace.c: New.
 381         * trace.h: New.