sim/msp430/ChangeLog

   1 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * configure.ac: Delete AC_CHECK_HEADERS call.
   4         * config.in, configure: Regenerate.
   5
   6 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
   7
   8         * configure: Regenerate.
   9
  10 2021-04-12  Mike Frysinger  <vapier@gentoo.org>
  11
  12         * msp430-sim.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
  13
  14 2021-04-02  Mike Frysinger  <vapier@gentoo.org>
  15
  16         * aclocal.m4, configure: Regenerate.
  17
  18 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
  19
  20         * configure: Regenerate.
  21
  22 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
  23
  24         * Makefile.in (SIM_EXTRA_LIBDEPS): Delete.
  25
  26 2021-02-27  Mike Frysinger  <vapier@gentoo.org>
  27
  28         * Makefile.in (SIM_EXTRA_ALL): Delete.
  29
  30 2021-02-21  Mike Frysinger  <vapier@gentoo.org>
  31
  32         * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
  33         * aclocal.m4, configure: Regenerate.
  34
  35 2021-02-13  Mike Frysinger  <vapier@gentoo.org>
  36
  37         * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
  38         * aclocal.m4, configure: Regenerate.
  39
  40 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
  41
  42         * configure: Regenerate.
  43
  44 2021-01-11  Mike Frysinger  <vapier@gentoo.org>
  45
  46         * config.in, configure: Regenerate.
  47
  48 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
  49
  50         * configure: Regenerate.
  51
  52 2021-01-08  Mike Frysinger  <vapier@gentoo.org>
  53
  54         * configure: Regenerate.
  55
  56 2021-01-04  Mike Frysinger  <vapier@gentoo.org>
  57
  58         * configure: Regenerate.
  59
  60 2020-08-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>
  61
  62         * msp430-sim.c (sim_open): Increase the size of the main memory region
  63         to 0xFAC0.
  64
  65 2020-08-05  Jozef Lawrynowicz  <jozef.l@mittosystems.com>
  66
  67         * msp430-sim.c (put_op): For unsigned multiplication, explicitly cast
  68         operands to the unsigned type before multiplying.
  69         * msp430-sim.h (struct msp430_cpu_state): Fix types used to store hwmult
  70         operands.
  71
  72 2020-01-22  Jozef Lawrynowicz  <jozef.l@mittosystems.com>
  73
  74         * msp430-sim.c (msp430_step_once): Ignore the carry flag when executing
  75         an RRC instruction, if the ZC bit of the extension word is set.
  76
  77 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
  78
  79         * configure: Regenerate.
  80
  81 2017-08-29  Jozef Lawrynowicz  <jozef.l@somniumtech.com>
  82
  83         * sim/msp430/msp430-sim.c (maybe_perform_syscall): Fix passing of
  84         arguments for variadic syscall "open".
  85
  86 2016-08-15  Mike Frysinger  <vapier@gentoo.org>
  87
  88         * msp430-sim.c: Delete bfd.h include.
  89         (lookup_symbol, msp430_sim_close): Delete.
  90         (sim_open): Change lookup_symbol to trace_sym_value.
  91         * sim-main.h (struct sim_state): Delete symbol_table and
  92         number_of_symbols.
  93         (STATE_SYMBOL_TABLE, STATE_NUM_SYMBOLS, msp430_sim_close,
  94         SIM_CLOSE_HOOK): Delete.
  95
  96 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
  97
  98         * config.in, configure: Regenerate.
  99
 100 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 101
 102         * configure: Regenerate.
 103
 104 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 105
 106         * configure: Regenerate.
 107
 108 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 109
 110         * configure: Regenerate.
 111
 112 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 113
 114         * configure: Regenerate.
 115
 116 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 117
 118         * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
 119         * configure: Regenerate.
 120
 121 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 122
 123         * configure: Regenerate.
 124
 125 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 126
 127         * configure: Regenerate.
 128
 129 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 130
 131         * config.in, configure: Regenerate.
 132
 133 2016-01-06  Mike Frysinger  <vapier@gentoo.org>
 134
 135         * msp430-sim.c (sim_open): Mark argv const.
 136         (sim_create_inferior): Mark argv and env const.
 137
 138 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
 139
 140         * msp430-sim.c (loader_write_mem): Delete.
 141         (lookup_symbol): Return -1 when abfd is NULL.
 142         (sim_open): Delete prog_bfd variable.  Delete call to sim_load_file.
 143         Delete prog_bfd check.
 144
 145 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
 146
 147         * Makefile.in (SIM_OBJS): Delete trace.o.
 148         * msp430-sim.c: Delete dis-asm.h and trace.h includes.
 149         (sim_open): Delete msp430_trace_init call.
 150         (msp430_dis_read): Delete function.
 151         (msp430_step_once): Replace disassembly logic with a call
 152         to TRACE_DISASM.
 153         * trace.c, trace.h: Delete files.
 154
 155 2016-01-04  Mike Frysinger  <vapier@gentoo.org>
 156
 157         * configure: Regenerate.
 158
 159 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 160
 161         * config.in, configure: Regenerate.
 162
 163 2016-01-02  Mike Frysinger  <vapier@gentoo.org>
 164
 165         * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
 166         LITTLE.
 167         * configure: Regenerate.
 168
 169 2015-12-27  Mike Frysinger  <vapier@gentoo.org>
 170
 171         * msp430-sim.c (sim_dis_read): Change private_data to application_data.
 172         (msp430_step_once): Likewise.
 173
 174 2015-12-27  Mike Frysinger  <vapier@gentoo.org>
 175
 176         * Makefile.in (SIM_OBJS): Delete sim-hload.o.
 177
 178 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 179
 180         * config.in, configure: Regenerate.
 181
 182 2015-12-15  Dominik Vogt  <vogt@linux.vnet.ibm.com>
 183
 184         * msp430-sim.c (get_op, put_op): Fix left shift of negative value.
 185
 186 2015-12-07  Nick Clifton  <nickc@redhat.com>
 187
 188         * msp430-sim.c (sim_open): Check for needed memory at address
 189         0x500 not 0x200.
 190         (get_op): Add support for F5 hardware multiply addresses.
 191         (put_op): Likewise.
 192
 193 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
 194
 195         * Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
 196         sim-stop.o.
 197
 198 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
 199
 200         * interp.c (sim_close): Rename to ...
 201         (msp430_sim_close): ... this.  Delete call to sim_state_free.
 202         * sim-main.h (msp430_sim_close): Declare.
 203         (SIM_CLOSE_HOOK): Define.
 204
 205 2015-06-24  Mike Frysinger  <vapier@gentoo.org>
 206
 207         * msp430-sim.c (trace_reg_put): Change TRACE_VPU to TRACE_REGISTER.
 208         (trace_reg_get): Likewise.
 209
 210 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 211
 212         * configure: Regenerate.
 213
 214 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 215
 216         * msp430-sim.c (maybe_perform_syscall): Replace call to cb_syscall
 217         with sim_syscall.
 218
 219 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 220
 221         * msp430-sim.c: Include sim-syscall.h.
 222         (syscall_read_mem, syscall_write_mem): Delete.
 223         (maybe_perform_syscall): Change syscall_read_mem/syscall_write_mem
 224         to sim_syscall_read_mem/sim_syscall_write_mem.
 225
 226 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 227
 228         * configure: Regenerate.
 229
 230 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 231
 232         * configure: Regenerate.
 233
 234 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 235
 236         * msp430-sim.c (trace_reg_put): Replace TRACE_VPU_P/trace_generic
 237         with TRACE_VPU.
 238         (trace_reg_get): Likewise.
 239         (get_op): Replace TRACE_MEMORY_P/trace_generic with TRACE_MEMORY.
 240         (put_op): Likewise.
 241         (msp430_dis_read): Replace TRACE_ALU_P/trace_generic with TRACE_ALU.
 242         (do_flags): Likewise.
 243         (maybe_perform_syscall): Replace TRACE_SYSCALL_P/trace_generic with
 244         TRACE_SYSCALL.
 245         (msp430_step_once): Replace TRACE_ALU_P/trace_generic with TRACE_ALU.
 246         Replace TRACE_BRANCH_P/trace_generic with TRACE_BRANCH.
 247
 248 2015-06-11  Mike Frysinger  <vapier@gentoo.org>
 249
 250         * sim-main.h (MAYBE_TRACE, TRACE_INSN, TRACE_DECODE, TRACE_EXTRACT,
 251         TRACE_SYSCALL, TRACE_CORE, TRACE_EVENTS, TRACE_BRANCH,
 252         trace_register, TRACE_REGISTER, TRACE_REG): Delete.
 253
 254 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 255
 256         * sim-main.h (SIM_CPU): Delete.
 257
 258 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 259
 260         * sim-main.h (sim_cia): Delete.
 261
 262 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
 263
 264         * sim-main.h (CIA_GET, CIA_SET): Delete.
 265
 266 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
 267
 268         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
 269         * sim-main.h (STATE_CPU): Delete.
 270
 271 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 272
 273         * configure: Regenerate.
 274
 275 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
 276
 277         * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
 278
 279 2015-04-01  Mike Frysinger  <vapier@gentoo.org>
 280
 281         * Makefile.in (SIM_OBJS): Delete $(SIM_EXTRA_OBJS).
 282
 283 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 284
 285         * config.in, configure: Regenerate.
 286
 287 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 288
 289         * sim-main.h: Delete run-sim.h include.
 290
 291 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 292
 293         * config.in, configure: Regenerate.
 294
 295 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 296
 297         * aclocal.m4, configure: Regenerate.
 298         * configure.ac: Call the common inline & warning macros.
 299         * msp430-sim.c: Include unistd.h & trace.h.
 300         * trace.c: Include trace.h.
 301         (load_file_and_line): Move FILE* decl to top of scope.
 302         * trace.h (msp430_get_current_source_location): Adjust prototype to
 303         match the function definition.
 304
 305 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 306
 307         * Makefile.in (SIM_RUN_OBJS): Delete.
 308
 309 2015-02-24  Nick Clifton  <nickc@redhat.com>
 310
 311         * msp430-sim.c (sim_open): Allocate memory regions matching those
 312         declared in the libgloss/msp430 linker scripts.
 313         Allow sim_load_file to fail.
 314         (get_op): Test the correct address bit when checking for out of
 315         range addresses.
 316         Include the address in the error message when an illegal access to
 317         the hardware multiplier is detected.
 318         (put_op): Test the correct address bit when checking for out of
 319         range addresses.
 320
 321 2014-08-19  Alan Modra  <amodra@gmail.com>
 322
 323         * configure: Regenerate.
 324
 325 2014-08-19  Nick Clifton  <nickc@redhat.com>
 326
 327         * msp430-sim.c: Move static hardware multiply support variables
 328         from here...
 329         * msp430-sim.h (msp430_cpu_state): ... into here ...
 330         * msp430-sim.c (get_op, put_op): ... and update references to use
 331         the msp430_cpu_state structure.
 332
 333 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 334
 335         * configure: Regenerate.
 336         * config.in: Regenerate.
 337
 338 2014-06-03  Nick Clifton  <nickc@redhat.com>
 339
 340         * msp430-sim.c (get_op): Handle reads of low result register when
 341         in MAC mode.
 342         (put_op): Copy MAC result into result words.
 343         Handle writes to the low result register.
 344
 345 2014-05-12  DJ Delorie  <dj@redhat.com>
 346
 347         * msp43-sim.c (sign_ext): Change to "long long" to support
 348         sign-extending 32-bit values.
 349
 350 2014-05-08  Nick Clifton  <nickc@redhat.com>
 351
 352         * msp430-sim.c (sim_open): Do not allocate memory over the
 353         hardware multiply registers.
 354         (get_op): Add support for reads from the hardware multiply
 355         registers.
 356         (put_op): Add support for writes to the hardware multiply
 357         registers.
 358         (msp430_step_once): Add support for the RETI instruction used by
 359         the CPUX architecture.
 360
 361 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 362
 363         * msp430-sim.c (sim_create_inferior): Set new_pc to the result of
 364         bfd_get_start_address when abfd is not NULL and new_pc is zero.
 365
 366 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 367
 368         * msp430-sim (maybe_perform_syscall): Change %d to %ld.
 369         (msp430_step_once): Cast fprintf to fprintf_ftype.
 370
 371 2013-09-23  Alan Modra  <amodra@gmail.com>
 372
 373         * aclocal.m4, configure: Regenerate.
 374
 375 2013-06-21  Nick Clifton  <nickc@redhat.com>
 376
 377         * Makefile.in: New.
 378         * aclocal.m4: Generate.
 379         * config.in: Generate.
 380         * configure.ac: New.
 381         * configure: Generate.
 382         * msp430-sim.c: New.
 383         * msp430-sim.h: New.
 384         * sim-main.h: New.
 385         * trace.c: New.
 386         * trace.h: New.