1 Mon Aug 25 16:17:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
3 * sim_calls.c (sim_open): Add ABFD argument.
5 Thu Jul 3 10:18:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
7 * ppc-instructions (PPC_INSN_INT): From Michael Thies - Monitoring
8 CR register updates dependant on RC value had logic backwards.
10 * ppc-instructions (Load String Word Immediate): From Brad Parker
11 - sense of wrap test in check for overwriting RA wrong.
12 (Load String Word Indexed): Ditto.
14 * configure.in: From Erik Landry - set sim_default_model not
15 sim_model for sim-default-model option.
16 * configure: Regenerate.
18 * interrupts.c (check_masked_interrupts): Schedule a hardware
19 interrupt delivery when FP interrupts get enabled.
20 (program_interrupt): Generate FP exceptions instead of aborting.
21 (deliver_hardware_interrupt): Deliver a FP exception if so
24 * registers.h: Add definition of fpscr_vx_bits.
26 * idecode_expression.h (FPSCR_END): Always update FEX and VX bits
28 (FPSCR_END): Explicitly check for possible floating point
30 (FPSCR_BEGIN): Simplify.
32 * ppc-instructions (Move From FPSCR): Enable.
33 (Move To FPSCR Bit 1): Ditto.
34 (Move To FPSCR Bit 0): Ditto.
35 (Move To FPSCR Field Immediate): Ditto.
36 (Move to Condition Register from FPSCR): Simplify.
37 (invalid_arithemetic_operation): Generate a QNaN when invalid
38 operation exception disabled.
40 Tue May 20 10:22:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
42 * sim_calls.c (sim_open): Add callback argument.
43 (sim_set_callbacks): Delete.
45 Tue Apr 22 22:36:57 1997 Mike Meissner <meissner@cygnus.com>
47 * sim_callbacks.h (error): Make declaration match gdb's.
48 * main.c (error): Ditto.
50 Fri Apr 18 17:03:09 1997 Andrew Cagney <cagney@b1.cygnus.com>
52 * sim_calls.c (sim_stop_reason): Simplify. Was running implies
53 stopped/SIGINT. Exit implies a status code.
55 * psim.c (cntrl_c_simulation): From main.c. Event function that
57 (psim_stop): New. Asynchronously schedule a stop simulator event.
58 (psim_run_until_stop): Delete. Made redundant by psim_stop.
60 * main.c (cntrl_c): Update.
61 (cntrl_c_simulation): Moved to psim.c.
63 * sim_calls.c (sim_stop): New function. Use psim_stop which
64 schedules a stop event.
65 (sim_resume): Drop SIGINT handler, now in gdb/main.c.
66 (sim_resume): Use psim_run as stop variable no longer needed.
68 Fri Apr 18 17:03:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
70 * psim.c (psim_options): Handle -E option correctly.
71 (psim_usage): Document.
73 Thu Apr 17 03:28:03 1997 Doug Evans <dje@canuck.cygnus.com>
75 * psim.c (psim_options): Ignore -E option (sets endianness).
76 * sim_calls.c: #include bfd.h.
77 (entry_point): New static local.
78 (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
79 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
81 Tue Apr 15 14:57:18 1997 Ian Lance Taylor <ian@cygnus.com>
83 * Makefile.in (INSTALL): Set to @INSTALL@.
84 (INSTALL_XFORM, INSTALL_XFORM1): Remove.
85 (install): Depend upon installdirs. Use $(program_transform_name)
86 directly, rather than using $(INSTALL_XFORM).
87 (installdirs): New target.
89 Fri Apr 4 17:54:36 1997 Jim Wilson <wilson@cygnus.com>
91 * Makefile.in (tmp-hw, tmp-pk): Use for loop to eliminate duplicates
92 rather than the non-portable cat -n.
94 Mon Apr 14 16:29:51 1997 Ian Lance Taylor <ian@cygnus.com>
96 * Makefile.in (INSTALL): Change install.sh to install-sh.
98 Tue Apr 1 18:15:14 1997 Jim Wilson <wilson@cygnus.com>
100 * ppc-instructions: Change milhwu to mulhwu.
102 Wed Apr 2 15:38:08 1997 Doug Evans <dje@canuck.cygnus.com>
104 * sim_calls.c (sim_open): New arg `kind'.
106 Wed Apr 2 14:51:17 1997 Ian Lance Taylor <ian@cygnus.com>
108 * COPYING: Update FSF address.
110 Tue Mar 25 16:17:59 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
112 * main.c (sim_io_read_stdin): Only compile unbuffered IO code if
113 all the required features are supported by the host OS.
115 Tue Mar 25 12:13:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
117 * emul_bugapi.c (emul_bugapi_create): Guard against NULL images.
119 * configure.in (enable-sim-endain): Correct typo in usage (from
120 Erik Landry <landry@ENGR.ORST.EDU>).
121 * configure: Re-generate.
123 Fri Mar 14 18:23:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
125 * Makefile.in (targ-vals.def): Re-do rule so that it works with
126 FreeBSD's make. Didn't like $<.
128 Thu Mar 13 12:55:48 1997 Doug Evans <dje@canuck.cygnus.com>
130 * sim_calls.c (sim_open): New SIM_DESC result. Argument is now
132 (other sim_*): New SIM_DESC argument.
134 Thu Feb 13 10:35:14 1997 Andrew Cagney <cagney@phydeaux.cygnus.com>
136 * ppc-opcode-simple-array, ppc-opcode-simple-goto,
137 ppc-opcode-simple-switch, ppc-opcode-complex-array,
138 ppc-opcode-complex-goto, ppc-opcode-complex-switch,
139 ppc-opcode-jump, ppc-opcode-goto, ppc-opcode-flat: Delete,
140 superseeded by --sim-decode-mechanism option.
142 * ppc-opcode-simple, dc-simple: Rename to be 8.3
143 * ppc-opcode-complex, dc-complex: Ditto.
144 * ppc-opcode-stupid, dc-stupid: Ditto.
145 * ppc-opcode-test-1, dc-test.01: Ditto.
146 * ppc-opcode-test-2, dc-test.02: Ditto.
148 * configure.in (--enable-sim-opcode): Change prefix to dc- instead
151 Wed Feb 12 19:33:45 1997 Andrew Cagney <cagney@phydeaux.cygnus.com>
153 * Many of the ppc-opcode-* files are identical baring the type of
154 lookup table. Instead of having multiple tables, igen can do this
155 via an additional option.
157 * ld-decode.h, ld-decode.c (force_decode_gen_type): New function,
158 allow the type of generated table specified in the decode file to
161 * ld-decode.c (load_decode_table): Allow the table type to be
164 * igen.c (main): Add -T <mechanism> option so that an overriding
165 instruction decode mechanism can be specified.
167 * configure.in: New option --sim-decode-mechanism to control
168 igen's new -T <mechanism> flag.
169 * Makefile.in (IGEN_FLAGS): Add IGEN_IDECODE_MECHANISM set by the
171 * configure: Regenerate.
173 Tue Feb 11 13:49:10 1997 Michael Meissner <meissner@tiktok.cygnus.com>
175 * events.c (event_queue_create): Don't use NULL to initialize an
177 (even_queue_{init,schedule_after_signal,tick}): Conditionalize use
178 of sigprocmask to appropriate autoconf test.
180 * main.c ({cntrl_c,main}): Use RETSIGTYPE for signal return type,
182 * sim_calls.c (sim_{ctrl_c,resume}): Ditto.
184 * Makefile.in (callback.o): Define HAVE_CONFIG_H, so callback.c
185 includes our config.h.
187 Tue Feb 4 13:42:59 1997 Doug Evans <dje@canuck.cygnus.com>
189 * configure.in: Fix typo in test for callback.c.
190 * configure: Regenerated.
192 Fri Feb 7 10:04:25 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
194 * emul_chirp.c (emul_chirp_create): Handle a virtbase of -1 being
195 found in the device tree.
197 Wed Feb 5 10:56:27 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
199 * Property create/initialization still wasn't correctly ordered.
200 Should be delaying everything related to ihandle creation until
201 after the rest of the tree has been established.
203 * device.c (device_find_ihandle_runtime_property): Update.
204 (device_add_ihandle_runtime_property): Update.
206 * tree.c (parse_ihandle_property): Delay lookup of the device to
207 be opened until the ihandle initialization phase.
208 * tree.c (print_properties): Update.
210 Wed Feb 5 10:56:27 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
212 * gen-icache.c (print_icache_extraction): Add a reason parameter.
213 Augment each extracted field with a comment citing the codes
214 origin. Should simplify tracking down incorrect cache
217 Tue Feb 4 17:44:51 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
219 * gen-icache.c: Generalize code handling XXX_is_NNN so that it
220 works for normal and boolean table entries.
222 * psim.c (psim_write_memory): last_cpu == -1 or nr_cpus is now
223 valid. Handle this just like *_{read,write}_register now handles
226 Mon Feb 3 17:18:16 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
228 * events.c (insert_event_entry): Correct loop termination
231 Fri Jan 31 16:20:26 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
233 * psim.c (psim_options): Add new option -c for max-iterations or
235 (psim_usage): Document.
236 (psim_max_iterations_exceeded): New function, abort simulation if
237 max iterations exceeded.
239 * gen-idecode.c: Re-work the table lookup code so that it assumes
240 that the entry is a leaf by default. Simplify the boolean table
241 entry code so that it involves a mask + test instead of shift +
244 * gen-idecode.c: Correct generated igen body so that it no drops
245 or doubles clock interrupts.
248 Thu Jan 30 11:23:20 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
250 * Makefile.in (BUILT_SRC_WO_CONFIG): Change targ-vals.* to
253 * configure.in (sim_callback, sim_targ_vals): Set sim_targ_valls
254 if common callback is present.
256 Wed Jan 29 12:32:41 1997 Michael Meissner <meissner@tiktok.cygnus.com>
258 * configure.in (sim_callback): If the gdb is post 4.16, configure
259 callback support from the common directory.
260 * configure: Regenerate.
262 * Makefile.in (BUILT_SRC_WO_CONFIG): Add targ-vals.{h,def} and
264 (GDB_OBJ): Add callback support configured in.
265 (gentmap,targ-vals.def): Build from common directory.
266 (targ-vals.h,targ-map.c): Build by running gentmap.
267 (callback.o): Build from source in common directory.
268 (targ-map.o): Add dependency.
269 (clean): Remove gentmap.
271 Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
273 * igen wasn't aborting if the opcode table contained no valid
276 * misc.c (name2i): Possibly abort if an invalid name is
278 * ld-decode.c: Abort if the table type isn't found.
280 Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
282 * When performance monitoring is disabled, it is still possible to
283 determine the simulation speed by looking at the number of elapsed
284 ticks recorded by the event queue.
286 * psim.c (psim_write_register, psim_read_register): Force the cpu
287 to zero when it is either of `-1' or `nr_cpus'. In both cases the
288 next cpu would be zero any way.
290 * mon.c (mon_print_info): If possible, print the system cycle
291 performance. This is an indication of the number of instructions
294 Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
296 * The code to allow an event queue to be updated during a signal
297 was missing. For main.c, a cntrl-c simulation termination wasn't
300 * The simulation would not correctly restart if an event requested
301 that the simulation be halted.
303 * psim.c (psim_options): Add hack to -i option to optionally
304 include a level vis -i2.
305 (psim_usage): Document.
307 * main.c (cntrl_c, cntrl_c_simulation): New functions. When a
308 cntrl-c occures schedule an event to halt the simulation.
309 (main): Catch CNTRL-C signals with the function cntrl_c.
311 * events.c (event_queue_process): Mask interrupts while
312 manipulating the async event queue.
313 (event_queue_init): Ditto.
314 (event_queue_schedule_after_signal): Ditto.
316 * events.c (event_queue_process): Mark the event queue as being in
317 the processing state when processing has started. Adjust code
318 so that it is tolerant of halts.
319 (event_queue_init): Start the event queue out with processing
321 (event_queue_tick): Check that processing isn't still being
324 * gen-idecode.c (print_run_until_stop_body): Call
325 event_queue_process_events to clear possibly pending events before
326 starting a simulation run. Re-arange main loop so that simulator
327 is correctly restarted when an event halts the simulation.
329 * psim.c (psim_halt): Handle an event halting the simulation.
330 * psim.c (psim_init): Adjust initial cpu - == -1 - to match
333 Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
335 * ppc-opcode-complex: Correct typo - was expanding ORA instead of
336 RA. Based on instruction frequency stats, expand additional
338 * ppc-instructions: Change all `RA == 0' to RA_is_0.
340 * ppc-opcode-stupid: Move all but the basic table in -complex into
341 here. Update to new format.
343 * Makefile.in (tmp-defines): New target. Force defines.h to always
344 be built. Hence get ppc-opcode-goto to build.
346 Tue Jan 28 13:00:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
348 * hw_com.c (hw_com_instance_read, hw_com_instance_write):
351 Thu Jan 23 09:07:26 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
353 * hw_trace.c (hw_trace_init_data): Delete. The trace options need
354 to be initialized independant of the rest of the simulation
355 initalization. Otherwize a trace option explictly set from gdb
356 could be overridden by hw_trace.
358 * psim.c (psim_options): Clarify reason why the trace ioctl occures.
360 * FIXME: The trace code is too scattered - hw_trace.c, psim.c,
361 debug.c. It could be much simpler.
363 Thu Jan 23 09:07:26 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
365 * Some devices support removable media. Add hooks to the disk
366 device so that it supports this.
368 * device.c (device_add_string_array_property,
369 device_find_string_array_property): New functions, manipulate
370 properties containing an array of strings.
371 (device_find_string_property): Allow a string array.
372 (device_init_static_properties): Update.
373 (device_init_runtime_properties): Update.
375 * hw_disk.c (hw_disk_ioctl): Add ioctl for changing the disk
376 media. If no file image is specified, use the next one in the
378 (hw_disk_init_address): Change the file property so that it is a
379 string array - use the first entry for the initial file image.
381 * tree.c (print_string_aray_property): New function - print a
383 (print_properties): Adjust.
384 (print_string): Write a string, handling double quotes.
386 * device.h: Define an ioctl to `change-media' with an optional new
389 * hw_disk.c: Allow floppy disk devices to be specified.
391 * psim.c (psim_command): New function, parse more complex psim
392 commands such as "change-media" and "trace".
393 * sim_calls.c (sim_do_command): Use.
395 Wed Jan 22 09:38:33 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
397 * For expressions like (RA == 0) that are entered in to the cache
398 as RA_is_0. If possible generate the result of the expression so
399 that the compiler gets a better chance of eliminating dead
402 * gen-icache.c (print_icache_extraction): For a cache entry of
403 the form <name>_is_<const> where it is a boolean field, generate
404 the result of the expression instead of the expression its self.
405 (print_icache_body): Remove code that was looking for *_is_0 and
406 then generating corresponding definitions.
408 * gen-icache.c (print_icache_struct): If there is no cache, do not
409 output expressions in idecode.h file.
411 * gen-icache.c (print_icache_body): Output them here.
413 * ppc-opcode-complex: Clarify constant values for SPR==LR register
416 * ppc-cache-rules (RA_is_0, SPR_is_256): Two new cache entries.
418 Wed Jan 22 12:24:52 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
420 * The code that put values in and extracted values from the cache
421 was too compilicated. The cache table did not allow values to be
422 computed from cache entries. #defines could only be used when a
423 cache was present, remove the restriction.
425 * ld-cache.h, ld-cache.c: Add a new cache entry type - SCRATCH. A
426 scratch variable is defined when a cache entry is beinf
427 filled. Change the definition of a COMPUTE variable to be defined
428 when the cache entry is being used.
429 * gen-icache.c: Update.
431 * ld-cache.h, ld-cache.c: Change field names so that their meaning
432 is more obvious. old_name->field_name, new_name->derived_name.
433 * gen-icache.c: Update
435 * gen-icache.h, gen-icache.c (print_icache_body): Make the three
436 different types of cache code - put into cache, extract from
437 cache, no cache - an explicit argument to print_icache_body.
438 * gen-icache.c (print_icache_extraction): Ditto.
440 * gen-semantics.c (print_c_semantic): Update use.
441 * gen-idecode.c (print_jump_insn): Update use.
442 * gen-icache.c (print_icache_function): Update use.
444 * igen.c (main): Change 'R' option so that it does not force the
447 * configure.in (enable-sim-icache): Clarify description. Make
448 #define one of the defaults regardless of the cache. Probably
449 should revamp and add a separate option.
451 Tue Jan 21 13:26:10 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
453 * pk_disklabel.c (block_is_fdisk): Tidy up traces - use dos
455 (pk_disklabel_create_instance): Partition 1..4 are valid - not
457 (is_iso9660): New function, verify a CD9660 File system.
458 (pk_disklabel_create_instance): Start expanding so that active
459 partition selection is supported.
461 Mon Jan 20 11:20:15 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
463 * The cap object was retaining a reference to the instance of a
464 device after it was deleted. Instead add and remove cap's from the
465 cap db as they are created and deleted. This ensuring that a
466 capibility is only used during the lifetime of the corresponding
469 * cap.h, cap.c: Correct cap type - was signed32 should be
472 * cap.c (cap_add, cap_remove): New methods for cap object that
473 allow the explicit addition and removal of internal objects that
476 * cap.c (cap_init): Rewrite. Verify that the only objects
477 remaining in the cap data base are those that were entered first.
478 Thse objects will be the permenant ones.
479 * device.c (device_init_address): Remember to initialize the cap
482 * device.c (device_create_instance_from): Explicitly add device
483 instances to the cap database. Simplify create code.
484 (device_instance_delete): Explicitly remove device instances from
487 * device.c (device_create_from): Explicitly add a device to the
490 * device.c (device_create_from): Always set the cap members.
492 * hw_disk.c: Output the instance when tracing.
494 Sun Jan 19 16:44:29 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
496 * tree.c (split_device_specifier): Add support for aliases when
497 looking up a device. Now needs a device as an argument.
498 (split_property_specifier): Ditto.
500 Sun Jan 19 15:28:23 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
502 * The memory "claim" and "release" methods take an address and
503 size as arguments. These may be multi cell values. Initially fix
504 the memory code so that they check/detect this. Leave the
505 adjustment of any clients to later.
507 * hw_memory.c (hw_memory_instance_claim,
508 hw_memory_instance_release): Handle multi-cell memory devices.
510 * hw_memory.c (hw_memory_instance_claim): Be tolerant towards the
511 release of memory regions that were not claimed.
513 Fri Jan 17 12:01:07 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
515 * device.h, device.c (device_instance_call_method): Correct return
516 type - can return either 0 or -1, hence should be a signed type.
517 * device_table.h: Ditto.
519 * hw_memory.c (hw_memory_instance_claim,
520 hw_memory_instance_release): Update.
521 * hw_disk.c (hw_disk_max_transfer, hw_disk_block_size,
522 hw_disk_nr_blocks): Ditto.
524 Fri Jan 17 11:50:13 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
526 * emul_chirp.c (chirp_emul_claim): Implement using the "claim"
527 method belonging to "/chosen/memory".
528 (chirm_emul_release): Ditto.
530 * Makefile.in (LIB_INLINE_SRC): Remove emul_* from list of files
531 that are inlined. These modules are called via a table and are
534 * hw_init.c (update_for_binary_section): Fix failure to allocate
535 memory used by the binary in real-mode executions. If "claim"
536 property is present, allocate memory from the "/chosen/memory"
539 * emul_chirp.c (emul_chirp_create): Specify that memory should be
540 claimed when loading a real image.
542 * hw_memory.c (hw_memory_instance_claim): Don't page align memory
545 * hw_memory.c (hw_memory_instance_release): Avoid infinite loop
546 when merging adjacent memory chunks.
548 Thu Jan 16 08:51:25 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
550 * vm.h (vm_data_map_read_buffer, vm_data_map_write_buffer): Add
551 optional PROCESSOR & CIA args so that this routine also abort an
554 * vm_n.h (vm_data_map_read_N, vm_data_map_write_N): For a
555 miss-aligned access when a transfer fails abort.
557 * emul_bugapi.c (emul_bugapi_do_write): Use emul_read_buffer
558 instead of the vm_read_buffer.
559 * emul_netbsd.c (do_write): Ditto.
560 * emul_unix.c (do_unix_write): Ditto.
562 Wed Jan 15 14:38:25 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
564 * configure.in (--enable-sim-jump): Default is NULL and not -E.
565 * configure: Regenerate.
567 * basics.h (__attribute__): Enable attributes if GCC >= 2.6.
568 (UNUSED): Only enable UNUSED if GCC >= 2.7.
570 * gen-icache.c (print_icache_extraction): Print UNUSED macro
571 instead of explicit __unused__ attribute.
572 (print_icache_body): Ditto.
573 * idecode_expression.h (FPSCR_BEGIN): Use UNUSED.
575 Wed Jan 15 13:54:50 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
577 * cpu.h, cpu.c (cpu_synchronize_context): Add CIA argument as
580 * vm.c (vm_synchronize_context): Add PROCESSOR and CIA as
581 arguments so that there is a reference point for recovery.
582 (vm_synchronize_context): Pass processor+cia for errors.
583 (om_unpack_sr): Ditto.
584 (om_unpack_srs): Ditto.
585 * vm.c (vm_create): Review error messages.
587 * vm.c: Include "cpu.h" so that cpu_error is visible.
589 * ppc-instructions (Return From Interrupt): Pass CIA.
590 (Instruction Synchronize): Ditto.
591 * psim.c (psim_init): Ditto.
593 Wed Jan 15 12:25:11 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
595 * cpu.h, cpu.c (cpu_error): Aborts simulation with error message,
596 but also saves current processor state.
598 * basics.h: Move #include <stdarg.h> to here from device_table.h.
600 * interrupts.c (perform_oea_interrupt): Use. No longer loose CIA
601 when simulation aborted.
602 (program_interrupt): Ditto.
603 (floating_point_unavailable_interrupt): Ditto.
604 (alignment_interrupt): Ditto.
605 (floating_point_assist_interrupt): Ditto.
606 (perform_oea_interrupt): Ditto.
607 (machine_check_interrupt): Ditto.
609 Tue Jan 14 12:19:10 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
611 * ppc-instructions (Move from Special Purpose Register): Support
614 Mon Jan 13 16:58:12 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
616 * debug.h, debug.c: Add "interrupts" trace option.
618 * interrupts.c (data_storage_interrupt): Add tracing.
619 (machine_check_interrupt): Ditto.
620 (instruction_storage_interrupt): Ditto.
621 (alignment_interrupt): Ditto.
622 (program_interrupt): Ditto.
623 (floating_point_unavailable_interrupt): Ditto.
624 (system_call_interrupt): Ditto.
625 (floating_point_assist_interrupt): Ditto.
626 (deliver_hardware_interrupt): Ditto.
628 * interrupts.c (program_interrupt): For UEA mode, halt the
629 processor - so that the current state is saved - instead of
631 (floating_point_unavailable_interrupt): Ditto.
632 (floating_point_assist_interrupt): Ditto.
634 Thu Jan 2 09:10:41 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
636 * interrupts.c (perform_oea_interrupt): Halt rather than abort on
639 Wed Jan 1 22:54:52 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
641 * ppc-instructions (Store Multiple Word, Load Multiple Word):
644 * tree.c (print_properties): For an array consider printing it out
647 * hw_memory.c (hw_memory_init_address): If an "available" property
648 is present, use that to initialize the available memory instead of
649 using the reg property.
651 * emul_generic.c (emul_add_tree_hardware): Add "available"
652 property to memory device.
654 Fri Dec 20 13:19:07 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
656 * ppc-instructions (Rotate Left Word then AND with Mask): Enable.
658 * device.c (device_instance_call_method): Was only looking at the
661 * hw_disk.c (hw_disk_nr_blocks): Implement #blocks method.
662 (hw_disk_block_size): Implement block-size method.
663 (hw_disk_max_transfer): Implement max-transfer method.
665 * hw_phb.c (hw_phb_init_address): Reinit the rest of the PHB.
667 * emul_chirp.c (chirp_emul_instance_to_path): Recover from an
669 (chirp_emul_instance_to_package): Ditto.
670 (chirp_emul_method): Ditto.
671 (chirp_emul_read): Ditto.
672 (chirp_emul_write): Ditto.
673 (chirp_emul_close): Ditto.
674 (chirp_emul_seek): Ditto.
675 (chirp_emul_package_to_path): Ditto (for phandle).
676 (chirp_emul_package_to_path): Return the length.
678 * psim.c (psim_merge_device_file): Allow continuation lines.
680 Thu Dec 19 11:09:43 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
682 * emul_chirp.c (chirp_emul_boot): Implement. Well report the new
685 * emul_chirp.c (chirp_emul_exit): Correct type of args struct
686 members - *_cell not host dependant int.
688 Wed Dec 18 17:49:59 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
690 * interrupts.c (perform_oea_interrupt): Print additional
691 information if a double interrupt is encountered.
693 Wed Dec 18 17:49:59 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
695 * psim.c (psim_merge_device_file): Tolerate an incorrect file-name
696 being specified with the -f option.
697 (psim_merge_device_file): Correct check for end of string.
699 Wed Dec 18 17:49:59 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
701 * emul_chirp.c (chirp_emul_peer): Was falling off the end of the
702 list of devices. Return zero to the client instead.
703 * emul_chirp.c (chirp_emul_child): Ditto
704 * emul_chirp.c (chirp_emul_parent): Ditto
706 * device.c (device_root): Assert assumption about the device being
709 Tue Dec 17 15:12:38 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
711 * emul_chirp.c (emul_chirp_create): Add description property to
712 each significant node in the device tree.
713 * emul_bugapi.c (emul_bugapi_create): Ditto.
715 Fri Dec 13 14:30:31 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
717 * main.c (sim_io_read_stdin): For a single byte STDIO read, use a
718 tempoary two byte buffer. Single byte read with fgets will not
720 * main.c: Include errno.h.
721 (sim_io_read_stdin): For non-STDIO, make it work.
723 * emul_chirp.c (chirp_emul_read): Return the correct error status.
725 Fri Dec 13 14:30:31 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
727 * std-config.h (WITH_STDIO): Don't hard-wire the STDIO mechanism.
728 Instead have each emulation default it to DO_USE_STDIO.
730 * emul_generic.c (emul_add_tree_options): Select the STDIO I/O
731 mechanism as the default if enabled or if nothing selected.
733 * sim_calls.c (sim_io_read_stdin): Passify GCC's desire for a
735 (sim_io_write_stdout): Ditto.
736 (sim_io_write_stderr): Ditto.
737 * main.c (sim_io_write_stdout): Ditto.
738 (sim_io_write_stderr): Ditto.
739 (sim_io_read_stdin): Ditto.
741 Tue Dec 10 10:31:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
743 * emul_chirp.c (emul_chirp_instruction_call): Make *printf calls
745 * vm.c (om_effective_to_virtual): Ditto.
746 * events.c (event_queue_schedule{,_after_signal}): Ditto.
747 (event_queue_{deschedule,process}): Ditto.
748 * hw_htab.c (htab_decode_hash_table): Ditto.
749 (htab_map_{page,binary}): Ditto.
750 * hw_opic.c (hw_opic_init_data): Ditto.
751 (handle_interrupt): Ditto.
752 (do_processor_init_register_{read,write}): Ditto.
753 (write_vector_priority_register): Ditto.
754 ({read,write}_destination_register): Ditto.
755 (do_suprious_vector_register_{read,write}): Ditto.
756 (do_current_task_priority_register_N_{read,write}): Ditto.
757 (do_timer_frequency_reporting_register_{read,write}): Ditto.
758 (do_timer_N_{current,base}_count_register_{read,write}): Ditto.
759 (do_ipi_N_dispatch_register_write): Ditto.
760 (do_vendor_identification_register_read): Ditto.
761 (do_feature_reporting_register_N_read): Ditto.
762 (do_global_configuration_register_N_{read,write}): Ditto.
763 * hw_phb.c (hw_phb_attach_address): Ditto.
764 (hw_phb_unit_decode): Ditto.
765 (hw_phb_address_to_attach_address): Ditto.
766 (hw_phb_io_{read,write}_buffer): Ditto.
767 * hw_ide.c (setup_fifo): Ditto.
769 * sim_calls.c ({defs,callback,remote-sim}.h): Find gdb include
770 files via -I<dir> instead of using "../../gdb/" prefixes.
772 Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
774 * debug.h: Add tracing for the pal device.
777 * emul_chirp.c (chirp_emul_getprop): More tracing.
779 Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
781 * device.h, device.c (device_find_ihandle_runtime_property): New
782 function. Reverse of add_ihandle_runtime property.
783 (device_init_runtime_properties): Use it.
785 * device.c (find_property_entry): New function returns the
786 internal property spec.
787 (device_set_property): Use.
788 (device_find_property): Use.
790 Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
792 * psim.c (psim_merge_device_file): Strip newline from device
795 Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
797 * hw_htab.c (htab_map_binary): For overlapping text / data maps
798 merge the two. Also check that the merge is safe.
800 * emul_chirp.c (emul_chirp_create): Add a description property to
801 the pte's so that they are easier to identify.
803 (emul_chirp_create): Don't specify a load address for the CHRP
804 image. Always use the values specified by the executable.
806 * hw_htab.c (htab_map_page): Abort if a duplicate map is
809 Mon Dec 9 12:08:46 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
811 * hw_htab.c (htab_map_page): Formatting.
813 * emul_chirp.c (emul_chirp_instruction_call): Check for a NULL
814 method name when handling the client call. Also check for other
817 * emul_chirp.c (emul_chirp_create): Allow real-mode?, real-base,
820 Mon Dec 9 12:08:46 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
822 * os_emul.c (os_emul_create): Use tree find property instead of
823 device find property - sigh.
825 Thu Dec 5 10:46:42 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
827 * 961205: Release snapshot 961205.
829 Thu Dec 5 10:46:42 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
831 * configure.in (hostbitsize, bitsize): Fix typo in error message -
832 cannot contain a comma.
833 (sim-warnings): Check for more potential errors.
835 * psim.c (psim_usage): Add -f <file> option. Specifies a file
836 containing device tree specifications that should be merged into
839 * configure.in: Sort options.
842 Wed Dec 4 13:57:31 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
844 * psim.c (psim_usage): Add -n option - specify number of
847 * emul_chirp.c: Add description.
848 * emul_bugapi.c: Ditto.
849 * emul_unix.c: Ditto.
850 * emul_netbsd.c: Ditto.
852 Fri Nov 29 11:12:22 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
854 * hw_pal.c (hw_pal_attach_address): New function, if an attach is
855 encountered, assume that it is the single disk.
856 * hw_pal.c: Add generic device/size decode methods.
858 * hw_nvram.c (hw_nvram_init_address): Use the first nonzero reg
859 property entry when determining the nvram size.
861 * hw_core.c: Add generic address/size decode methods.
863 * emul_chirp.c (emul_chirp_instruction_call): Return and trace
864 nonzero status from client functions.
866 * main.c (error): Always include a cariage return when writing out
869 Wed Nov 20 00:36:55 1996 Doug Evans <dje@canuck.cygnus.com>
871 * sim_calls.c (sim_resume): Reset sim_should_run if single
874 Thu Nov 28 13:19:46 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
876 * emul_bugapi.c (emul_bugapi_do_diskio): Add support for multiple
879 * emul_generic.c (emul_add_tree_hardware): Drop the dummy eeprom.
880 Attach the pal - for I/O - as a pseudo device haning from the
883 * emul_bugapi.c (emul_bugapi_create): Add a small memory device to
884 the device tree at the address of the hi-mem interrupt vector
885 addreses. Used by bugapi to establish its trap instructions.
887 * debug.h: Add a new macro DITRACE for tracing device instances.
889 * debug.h: Extend the DTRACE macro so that it can also tests for
890 device specific tracint.
892 * device.h, device.c (device_trace): Add method to determine
893 device specific tracing.
894 (device_init_address): Set the devices tracing level.
896 Thu Nov 21 12:05:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
898 * tree.h, tree.c (tree_device): New files - separate out the
899 device parser and other tree operations from the device.
901 * inline.h, inline.c (INLINE_TREE): Add.
902 * device.h, device.c (device_tree_add_parsed): Delete.
903 * Makefile.in (tree.c): Add rules for new file.
904 * Makefile.in: Better order the emul_* files.
906 * emul_generic.c (emul_add_tree_hardware): Update.
907 * emul_netbsd.c (emul_netbsd_create): Update.
908 * emul_unix.c (emul_unix_create): Ditto.
909 * emul_chirp.c (emul_chirp_create): Ditto.
910 * emul_bugapi.c (emul_bugapi_create): Ditto.
911 * psim.c (psim_tree): Ditto.
914 * emul_generic.h: Include tree.h
915 * Makefile.in: Add to EMUL_GENERIC_H dependencies.
917 * device.h, device.c (device_root): New function - returns the
921 * device.h, device.c (device_clean): New function, clean up device
922 ready for next simulation run. This includes things like deleting
923 interrupt edges and properties created during the simulation and
924 also scrubbing any pre-defined properties.
925 * tree.c (tree_init): Use.
927 * device.h, device.c (device_init_static_properties): New
928 function. Initialize any static predefined properties. By static
929 we mean those that have values that can be determined before the
930 device tree initialization has started.
931 * tree.c (tree_init): Use.
933 * device.h, device.c (device_init_address): Add code to
934 check/verify the devices #address-cells and #size-cells.
935 (device_add_integer_property): Delete corresponding code.
936 (device_nr_address_cells, device_nr_data_cells): Check for
937 property when returning value.
939 * device.h, device.c (device_init_runtime_properties): New
940 function. Initialize those properties that are not `static'. At
941 present the only such property is the ihandle.
942 * tree.c (tree_init): Use.
944 * device.h, device.c (reg, ranges): Rework these so that they use
945 an array of the fundamental type - single reg or single range
948 * device.h, device.c (device_add_ihandle_runtime_property):
949 Re-implement the adding of an ihandle during tree construction so
950 that it better fits in with device initialization.
952 Thu Nov 21 12:05:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
954 * device.h, device.c (device_ioctl): Add additional argument -
955 request - so that the caller must always specify the type of
958 * device_table.h: Update.
959 * hw_trace.c (hw_trace_ioctl): Ditto.
960 * hw_vm.c (hw_vm_ioctl_callback): Ditto.
961 * hw_init.c (hw_stack_ioctl_callback): Ditto.
962 * psim.c (psim_options): Ditto.
964 Thu Nov 21 12:05:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
966 * BUGS: Updated a bit.
968 Wed Nov 20 14:06:37 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
970 * hw_opic.c: Finish - third round.
972 Wed Nov 20 12:02:08 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
974 * hw_glue.c (hw_glue_io_read_buffer_callback): Fix miscalc of glue
976 (hw_glue_io_write_buffer_callback): Ditto.
978 Tue Nov 19 21:17:08 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
980 * events.c (event_queue_process): Was incorrectly consuming future
981 events on the queue when they should be left alone.
983 * debug.h, debug.c (events): Add support for event queue tracing.
984 * events.c: Add event tracing.
986 * debug.h, debug.c: Order device trace options.
988 Fri Nov 15 15:23:39 1996 Michael Meissner <meissner@tiktok.cygnus.com>
990 * pk_disklabel.c (pk_disklabel_create_instance): Fix up some
991 warnings generated by GCC.
993 Sun Nov 17 17:59:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
995 * sim-endian.h: Add LE versions of byte swap macros. Needed for
996 PCI devices which are little-endian.
998 * sim-endian-n.h (endian_le2h_N, endian_h2le_N): Ditto
1000 Sun Nov 17 17:59:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1002 * hw_iobus.c (hw_iobus_attach_address_callback): Change the iobus
1003 so that it is implementing a 1-1 address map.
1005 * emul_generic.c (emul_add_tree_hardware): Adjust.
1007 * emul_generic.c (emul_add_tree_hardware): Don't add the nvram as
1010 Sun Nov 17 17:59:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1012 * device.c (split_find_device): Be tolerant of missing unit
1015 Fri Nov 15 16:49:49 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1017 * basics.h (port_direction): New type, specify the direction of
1020 * device.h, device.c (device_interrupt_decode): Include
1021 specification of port direction in operations.
1022 (device_interrupt_encode): Ditto.
1024 * device_table.h: Add a direction field to the interrupt port
1027 * device.c (device_tree_add_parsed): Specify port direction.
1029 Thu Nov 14 21:38:13 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1031 * hw_opic.c: Finish - second round.
1033 Thu Nov 7 00:18:59 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1035 * hw_htab.c (htab_init_data_callback): Allow the virtual-address
1036 to be specified as an array which allows 64bit addresses.
1038 * device.c (device_find_integer_array_property): New function.
1039 Simplify the querying of elements of an integer array.
1040 (device_add_integer_property, device_find_integer_property):
1041 Update to correctly use the cell type.
1043 * vm.c (om_unpack_sr): Clarify shifting comment.
1044 (om_pte_0_masked_vsid): Ditto. Add 64bit version.
1046 * emul_chirp.c (emul_chirp_create): Initialize the segment
1049 * vm.c (om_effective_to_virtual): Trace segment register use.
1051 * hw_htab.c (htab_map_page): Print out the pteg base address to
1052 simplify cross checking between vm and the htab.
1053 (htab_decode_hash_table): Use device_error instead of error.
1054 (htab_map_page): Ditto.
1055 (htab_dma_binary): Ditto.
1056 (htab_map_binary): Ditto.
1057 (htab_init_data_callback): Ditto.
1059 Wed Nov 6 20:20:58 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1061 * interrupts.h: Clarify what the optional instruction program
1062 interrupt is - a subset of illegal instruction program interrupt.
1064 * interrupts.c (program_interrupt): For UEA mode, clarify what an
1065 optional instruction program interrupt is.
1066 (program_interrupt): For OEA mode, as per spec, generate an
1067 illegal instruction program interrupt when an optional instruction
1070 * gen-semantics.c (print_semantic_body): Delete code
1071 differentiating between an unimplemented floating point and normal
1072 instruction. Instead, such a case can be handled explicitly.
1074 * ppc-instructions (store floating-point as integer word indexed):
1076 (Floating Convert to Integer Doubleword): Make the floating point
1077 assist interrupt explicit.
1078 (Floating Convert To Integer Doubleword with round towards Zero):
1080 (Floating Convert To Integer Word): Ditto
1081 (Move From FPSCR): Ditto.
1082 (Move to Condition Register from FPSCR): Ditto.
1083 (Move To FPSCR Fields): Ditto.
1084 (Move To FPSCR Field Immediate): Ditto.
1085 (Move To FPSCR Bit 0): Ditto.
1086 (Move To FPSCR Bit 1): Ditto.
1088 Mon Nov 4 12:49:13 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1090 * corefile.c (core_map_read_buffer, core_map_write_buffer): Avoid
1091 breaking up transfers.
1093 * corefile.c: Adjust arguments so that the client server
1094 relationship is clarified.
1096 * hw_glue.c (hw_glue_init_address): Update so it can be attached
1099 * hw_disk.c (hw_disk_instance_write): Add more checks to disk IO -
1100 looking for things like overflow/underflow.
1102 Sun Nov 3 18:45:20 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1104 * emul_generic.c (emul_add_tree_hardware): Hang the disk off the
1105 PAL device instead of the IOBUS. The disk must be attached to a
1108 * hw_disk.c (hw_disk_init_address): Just use the unit address
1109 directly in the attach - the rest isn't relevant.
1111 Sat Nov 2 21:48:57 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1113 * configure.in (sim-hardware, sim-packages): Allow additional
1114 hardware and packages to be prefixed as well as appended.
1116 * Makefile.in (tmp-hw, tmp-pk): Retain the user specified order of
1117 packages when building them. Consequently, a user can override a
1118 standard device by prefixing their own version.
1120 * Makefile.in (hw_opic.o, hw_pci.o, hw_ide.o): Add dependencies.
1122 Fri Nov 1 14:42:57 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1124 * mon.c (_cpu_mon): Add fields for counting 1, 2, 4, and 8 byte
1126 (mon_{read,write}): Count 1, 2, 4, and 8 byte reads/writes.
1127 (mon_print_info): Correct typo regarding # of unaligned reads and
1128 writes. Print out how many 1, 2, 4, and 8 byte reads/writes there
1131 Tue Oct 29 17:55:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1133 * configure.in (AC_CHECK_FUNCS): Add access.
1134 * config{.in,ure}: Regenerate.
1136 * emul_unix.c (do_unix_nop): System call that always succeeds.
1137 (do_unix_access): Support access system call.
1138 (solaris_descriptors): Make sigaltstack and sigaction nops.
1139 ({solaris,linux}_descriptors): Add support for access.
1141 Tue, 8 Oct 18:42:26 1996 Jason Molenda <crash@cygnus.co.jp>
1143 * Makefile.in (clean): Move config.log to distclean.
1145 Fri Nov 1 16:44:28 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1147 * corefile-n.h (core_map_write_N): Improve abort messages.
1149 * device.h, device.c (device_attach_address): Remove unused name
1151 (device_detach_address): Ditto.
1152 * device_table.h, device_table.c: Update.
1153 * hw_iobus.c (hw_iobus_attach_address_callback): Ditto.
1154 * hw_nvram.c (hw_nvram_init_address): Ditto.
1155 * hw_memory.c (hw_memory_init_address): Ditto.
1156 * hw_vm.c (hw_vm_init_address_callback): Ditto.
1157 (hw_vm_attach_address): Ditto.
1158 (hw_vm_add_space): Ditto.
1159 * hw_init.c (update_for_binary_section): Ditto.
1160 * hw_core.c (hw_core_attach_address_callback): Ditto.
1162 * hw_iobus.c (hw_iobus_attach_address_callback): Rewrite to handle
1163 configurable parent busses.
1165 Wed Oct 30 18:46:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1167 * device_table.c (generic_device_size_to_attach_size): Provide
1168 limited support for multi-cell sizes.
1169 (generic_device_address_to_attach_address): Ditto for addresses.
1171 Tue Oct 29 02:01:29 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1173 * device.c (device_add_integer_property): Check for setting of
1174 #address-cells and #size-cells properties. For these, update the
1175 corresponding device values.
1176 (device_nr_address_cells, device_nr_size_cells): Use the value
1177 from the device instead of the property.
1179 * hw_core.c: Use generic address and size conversions for the top
1182 * hw_memory.c (hw_memory_init_address): Tolerate case where
1183 #address and #size cells is greater than 1.
1185 * device.c (device_tree_print_device): Clean out printing of
1188 * device.c (split_device_specifier): Don't detect comments here -
1189 "#" can be a valid prefix - eg #size-cells.
1191 * psim.c (psim_merge_device_file): Suppress comments and blank
1194 * emul_generic.c (emul_add_tree_hardware): Fix typo of incorrect
1195 pal unit address. Add the property /#address-cells to the root of
1198 * device.c (device_template_create_device): Check that the unit
1199 address was successfully parsed.
1201 * device_table.c (generic_device_unit_decode): Rewrite to better
1202 handle multi-cell addresses.
1203 (generic_device_unit_encode): Ditto.
1205 * emul_generic.c (emul_add_tree_hardware): "reg" properties no
1206 longer need the explicit array type - the parser takes care of it.
1208 * pk_disklabel.c (pk_disklabel_create_instance): Add NULL return
1211 Mon Oct 28 22:55:48 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1213 * hw_ide.c: New file. Model of a basic IDE interface attached to
1216 * configure.in (hardware): Add the ide device to the default
1218 * configure: Regenerate.
1220 * debug.h, debug.c: Add tracing option for the IDE device.
1222 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1224 * hw_phb.c, hw_phb.h: New files - implement a PHB.
1226 * configure.in (hardware): Add the phb to the list of devices to
1229 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1231 * hw_com.c: Review description.
1234 * hw_eeprom.c: Ditto.
1238 * hw_com.c: Update event handling.
1240 * hw_disk.c: Implement tracing.
1242 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1244 * device_table.c (generic_device_init_address): Use
1245 assigned-addresses property in preference to any other reg
1248 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1250 * device.h, device.c (device_find_ranges_property): New function.
1251 Simplify the manipulation of "ranges" properties.
1253 * device.c (device_add_parsed): Extend to include support for the
1256 * device.c (device_add_parsed): Add assigned-addresses to the list
1257 of reg type properties.
1259 * device.c (device_tree_print_device): Add code to format and
1260 print a ranges property.
1262 * device.h, device.c (device_nr_address_cells,
1263 device_nr_size_cells): New functions. Determine the values of the
1264 standard properties #address-cells and #size-cells. Both of which
1265 are optional and have default values of two and one respectfuly.
1266 Previously, code that determined #address-cells was incorrectly
1267 using a value of one.
1269 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1271 * debug.h, debug.c: Sort debug options, Add entries for the
1274 Fri Oct 18 12:12:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1276 * ppc-instructions (Floating Select): Add support for fsel unless
1277 model is 601. Allow user to filter out instruction unless -Fs is
1279 (Store Floating-Point as Integer Word Indexed): Raise optional
1280 instruction program abort. Allow user to filter out instruction
1281 unless -Fs is passed to igen.
1282 (Floating Square Root{, Single}): Ditto.
1283 (Floating Reciprocal Estimate Single): Ditto.
1284 (Floating Reciprocal Square Root Estimate): Ditto.
1286 * configure.in (--enable-sim-filter): If not passed, pass 32,f,s
1288 * configure: Regenerate.
1290 * interrupts.h (program_interrupt_reasons): Add
1291 optional_instruction_program_interrupt.
1293 * interrupts.c (program_interrupt): Call error with more detailed
1294 information on program interrupts, particularly in user mode. Add
1295 support for optional_instruction_program_interrupt.
1297 Wed Sep 25 10:20:29 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1299 * hw_glue.c: New device. Hooks for manipulating interrupt ports.
1301 * debug.h, debug.c (trace_glue_device): Add tracing support for
1302 the interrupt glue logic device.
1304 * configure.in (hardware): Add glue device.
1305 * configure: Regenerate.
1307 Tue Sep 24 20:55:38 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1309 * device.c (device_tree_parse_integer_property): New function,
1310 parse a list of integers as an array property.
1311 (device_tree_add_parsed): Call it.
1313 * device.c (device_tree_parse_string_property): New function,
1314 parse a list of strings as a string property (with embeded
1315 null's). For moment, don't try to implement a complext string
1317 (device_tree_add_parsed): Call it.
1319 Tue Sep 24 16:30:48 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1321 * hw_opic.c: New file. OpenPIC interrupt controller.
1323 * configure.in (hardware): Add opic device.
1324 * configure: re-generate.
1326 * hw_pic.c: Delete, replaced with hw_opic.c.
1328 * debug.h, debug.c: Add debug option for OpenPIC device. -
1331 Tue Sep 24 16:30:48 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1333 * Makefile.in (psim.o, idecode.o): Since idecode and not psim is
1334 now the file that does all the inlining.
1336 * Makefile.in (LIB_SRC, LIB_INLINE_SRC, idecode.o): Break out the
1337 library source code that could be involved in an inlining. Make
1338 idecode.o only dependant on the inlined library source code.
1340 * Makefile.in (LIB_OBJ): Put options last on the list so that it
1343 * std-config.h (DEVICE_INLINE): Only inline locals when the
1344 default is to inline.
1346 Mon Sep 23 00:37:49 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1348 * hw_htab.c (htab_sum_binary): Determine the real-base for the
1351 * hw_htab.c (htab_map_binary): Depending on the value of the
1352 load-base, either map the program in as a contiguous section or as
1353 separate sections controled by th binaries lma values.
1354 (htab_init_data_callback): Ditto.
1356 Sun Sep 22 15:56:22 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1358 * emul_generic.c (emul_add_tree_options): Remove load-base option.
1360 * emul_chirp.c (map_over_chirp_note): Add load_base field to note
1361 struct. Don't require the load_base field to be present - just
1362 issue warning - it is a recent addition.
1363 (emul_chirp_create): Support both virtual and physical modes.
1365 * emul_chirp.c (emul_chirp_create): Add a stack initialization
1366 property so that any arguments specified on the command line can
1367 be passed on to user programs.
1369 * hw_init.c (create_ppc_chirp_bootargs): Add support for chirp
1370 argument passing to the pseudo device stack.
1372 Sat Sep 21 19:39:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1374 * device.c (device_error): Make it more tolerant to incomplete
1377 * hw_init.c (hw_data_init_data_callback): Extend the data device
1378 so that it can perform initialization operations either dma or a
1379 more complex instance open, seek, write operation.
1380 * hw_init.c: Update the description of the data device to reflect
1383 Sat Sep 21 00:13:02 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1385 * device.c (device_event_queue_schedule,
1386 device_event_queue_deschedule, device_event_queue_time): Have the
1387 device object export the event operations. Making these available
1388 from the device object should hopefully simplify writing device
1391 Fri Sep 20 14:04:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1393 * configure.in (sim-hardware): Add eeprom device to default build.
1395 * hw_eeprom.c: Rewrite so it works.
1397 * debug.h, debug.c: Add tracing support for the eeprom and com
1400 Thu Sep 19 14:40:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1402 * debug.h: Add disklabel-package and disk-device trace options.
1403 debug.h (PTRACE): Add macro to simplify tracing in packages.
1405 Thu Sep 19 14:40:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1407 * device.c (device_create_instance_from): Tighten up loop
1408 searching for device instances.
1409 (device_instance_delete): Ditto.
1410 (device_instance_delete): Only leaf instances need to be removed
1411 from a devices list of active instances.
1413 Thu Sep 19 14:40:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1415 * hw_disk.c: Add the cdrom as an alias.
1417 * pk_disklabel.c (disklabel_delete): Implement, remembering to
1418 delete the raw disk instance while we're at it.
1420 * pk_disklabel.c (pk_disklabel_create_instance): Implement a
1421 little bit more - still a long way to go.
1423 * pk_disklabel.c (disklabel_write, disklabel_read): Remember the
1424 new head position after a read or write.
1426 Thu Sep 19 13:05:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1428 * emul_chirp.c (chirp_emul_read): Allow reads to be longer then
1429 the internal buffer.
1431 Thu Sep 19 13:05:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1433 * emul_chirp.c (chirp_read_t2h_args): Call memset-0 with the args
1434 in the correct order.
1436 * emul_chirp.c (chirp_emul_call_method): Correct computation for
1437 the address of the first stack argument passed in from the client
1440 Wed Sep 18 19:33:54 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1442 * words.h: Add new types signed_cell and unsigned_cell which
1443 correspond to the signed and unsigned IEEE 1275 memory locations.
1444 * device.h, device.c, emul_chirp.c: Where refering to an IEEE 1275
1445 memory cell, replace uses of unsigned32 with unsigned_cell.
1446 * device_table.h: Ditto.
1448 * sim-endian.h: Add new macros H2BE_cell and BE2H_cell which
1449 convert cell sized values to from big endian.
1450 * device.c, emul_chirp.c: Where refering to IEEE 1275 memory cells
1451 use these new macros.
1453 Tue Sep 17 15:57:44 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1455 * device.c (device_tree_add_parsed): Detect and report an
1456 interrupt being attached to an invalid device. Was dumping core.
1458 Mon Sep 16 23:09:12 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1460 * device.h, device.c (device_address_to_attach_address,
1461 device_size_to_attach_size): New functions. Convert a devices
1462 unit address or unit size structure into a form suitable for
1463 passing on to the attach and detach functions.
1464 * device_table.h: Add extra methods to device table.
1466 * device.h, device.c (device_find_reg_property): New function.
1467 For a reg type property, return the selected address + size
1468 tupple, along with a positive success status. Add a reg_property
1469 to the list of property types.
1470 * (device_tree_add_parsed): Make array properties with the name
1471 reg or alternate-reg of type reg_property.
1473 * hw_memory.c (hw_memory_init_address): Rewrite to use new
1474 find_reg_property method.
1475 * hw_nvram.c (hw_nvram_init_address): Ditto.
1477 * device.c (device_tree_print_device): Add code to print out a reg
1480 * device_table.c (generic_device_address_to_attach_address,
1481 generic_device_size_to_attach_size ): New functions. Generic
1482 functions for converting between unit and attach address or size.
1484 * device_table.c (generic_device_init_address): Rewrite to use the
1485 new find_reg and address convert functions. Look for both reg and
1486 alternate-reg properties.
1488 Mon Sep 16 23:09:12 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1490 * hw_com.c: New file. A '550 serial device that can quickly be
1491 attached to any bus.
1492 * configure.in (enable-sim-hardware): Add the com device.
1493 * configure: re-generate.
1495 Thu Sep 12 17:30:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1497 * device.c (device_tree_verify_reg_unit_address): New
1498 function. Check that the unit address as specified by the reg
1499 property correctly corresponds to any unit address previously
1500 specified by the devices name.
1501 (device_tree_add_parsed): When adding a reg property, verify
1502 that the unit-address - first value of property - correctly
1503 matches any previous value specified when creating the device
1506 Thu Sep 12 17:30:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1508 * mon.c (mon_event): Remove assertion that an unsigned is >= 0.
1510 Fri Aug 16 12:05:24 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1512 * device.c (device_full_name): Cast strdup to char *, since AIX
1513 3.2.5 mistakenly declares the function to be const char *.
1514 (device_create_from): Ditto.
1515 (device_create_instance_from): Ditto.
1516 (device_add_property): Ditto.
1518 Tue Aug 13 11:40:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1520 * debug.c (trace_option): For -t all, do not set the
1521 trace_dump_device_tree flag, so that the simulator is run.
1523 Tue Aug 13 11:40:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1525 * Makefile.in (options.o): Depend on defines.h.
1526 (defines.h): New rule, go through config.h and make strings of all
1527 of the #define HAVE_xxx macros.
1528 (distclean): Remove defines.h.
1530 * options.c (print_options): Print whether many of the
1531 configuration macros are defined.
1533 * main.c (main): If -t options and no filename, just print the
1534 options, and don't print the usage message.
1536 Mon Aug 12 18:42:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1538 * configure.in: Test whether /dev/zero works on the system, and if
1539 it does, define HAVE_DEVZERO.
1540 * configure: Regenerate.
1542 * emul_generic.c (emul_add_tree_hardware): Do not add /iobus/disk
1543 if we don't have a working /dev/zero on the system.
1545 * emul_bugapi.c (emul_bugapi_init): If HAVE_DEVZERO is not
1546 defined, don't add disk support.
1547 (emul_bugapi_do_diskio): Ditto.
1548 (emul_bugapi_instruction_call): Ditto.
1550 Wed Aug 7 14:34:20 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1552 * emul_unix.c (HAVE_TCGETATTR): If HAVE_TERMIOS_STRUCTURE is not
1553 defined, make sure HAVE_TCGETATTR is #undef'ed
1555 Wed Aug 7 14:34:20 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1557 * std-config.h (REGPARM): Only define REGPARM attributes if using
1558 GNU C. Test for __i686__ in case GCC ever defines it. If not on
1559 a x86 platform, define REGPARM as nothing.
1561 * sim-endian.h (WITH_HOST_BYTE_ORDER): Test for i686 and __i686__
1564 Wed Aug 7 20:19:55 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1566 * ld-decode.h, ld-decode.c: Rename goto_gen to the more correct
1568 * gen-idecode.c: Ditto.
1570 * gen-idecode.c (print_idecode_table): Comment out check for
1571 switch/table combination until a bug with it is fixed.
1573 * ppc-opcode-goto: New file. Like complex and flat but uses
1574 goto-switch instead of padded-switch for the tables.
1576 * gen-idecode.c (print_goto_switch_name): New function.
1577 (print_goto_switch_table_leaf): New function.
1578 (print_goto_switch_break): New function.
1579 (print_goto_switch_table): New function. Prints a jump table
1580 that can be jumped into instead of a switch statement.
1582 * gen-idecode.c (*switch_*): As an option output a switch that is
1583 implemented using a jump table but only if the switch is not
1586 Tue Aug 6 09:28:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1588 * configure.in (--enable-sim-{hardware,packages}): Fix typos.
1589 * configure: Regenerate.
1591 * device.c (device_instance_call_method): Fixup format message in
1592 error case. Return 0 in case of error to shut up compiler
1595 Wed Aug 7 00:17:37 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1597 * device_table.c (generic_device_unit_decode): Require a comma
1598 between elements of a unit address.
1600 * device.c (device_tree_print_device): For reg, alternate-reg and
1601 ranges properties use special print functions.
1602 (device_print_ranges_property): Print formatted ranges property.
1603 (device_print_reg_property): Print formatted reg property.
1605 Tue Aug 6 21:35:18 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1607 * device.c (device_tree_add_parsed): For reg, ranges and
1608 alternate-reg properties use a special parser.
1609 (device_tree_parse_reg_property): New function to parse a reg
1611 (device_tree_parse_ranges_property): New function to parse a
1613 (device_encode_unit): Wrapper for encode_unit callback.
1614 (device_decoce_unit): Wrapper for decode_unit callback.
1616 Wed Jul 31 00:02:30 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1618 * device_table.h (device_instance_callbacks): Relace the claim and
1619 release methods with a more general table mapping from method-name
1622 * device.c (device_instance_call_method): New function. Implement
1623 the OpenBoot call-method client interface. Attempts to locate the
1624 instances method in the callback table.
1625 (device_instance_claim, device_instance_release): Delete.
1626 Replaced with call-method and a lookup table.
1628 * emul_chirp.c (chirp_emul_call_method): Use the new device
1629 instance call method and let that handle a client claim call.
1631 * hw_htab.c (claim_memory): Wrapper function to call the memory
1632 devices "claim" method using the new device-instance call-method
1633 interface. Replaces the previous direct calls to claim.
1634 (htab_map_region): Use claim_memory.
1635 (htab_init_data_callback): Ditto.
1637 * hw_memory.c (hw_memory_instance_claim): Update function
1638 interface so that it is compatible with call-method.
1639 (hw_memory_instance_release): Ditto.
1640 (hw_memory_instance_methods): New table of memory specific
1641 methods claim and release. Add to the hw_memory_callback
1644 Tue Jul 30 21:26:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1646 * psim.c (psim_init): Back out of change to initial value of
1649 Tue Jul 30 21:12:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1651 * sim_callbacks.h (sim_io_printf_filtered): Replace
1652 printf_filtered with a local simulator specific version. Add
1653 #define printf_filtered to simplify updating of existing code.
1655 * sim_callbacks.h (sim_io_write_stdout, sim_io_read_stdin,
1656 sim_io_write_stderr): New functions. Read / write to the
1657 simulations stdin and stdout and stderr interfaces. Merge in code
1658 from hw_pal that previously handled async I/O.
1659 (sim_io_flush_stdoutput): Rename flush_stdoutput. Add #define
1660 flush_stdoutput to simplify updating of existing code.
1662 * hw_pal.c (scan_hw_pal, write_hw_pal,
1663 hw_pal_instance_write_callback): Use the new sim_io functions.
1665 * main.c: Implement standalone versions of the new sim_io
1666 functions. Include support for async I/O.
1667 * sim_calls.c: Ditto. This time using the gdb callback table.
1669 * std-config.h (CURRENT_STDIO, current_stdio): New macro. Set up
1670 stdio configuration so that it works in the same way as the rest
1672 * psim.c (psim_create): Initialize current_stdio from the device
1674 * emul_generic.c (emul_add_tree_options): Enter a default value
1675 for use-stdio in the device tree.
1677 Fri Jul 26 19:43:03 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1679 * gen-idecode.c (print_jump): Was always generating a jump back to
1680 idecode. Only necessary at tail of semantic code.
1681 (print_jump): Was always setting the processor's cia, even during
1682 startup when the processor was still undefined.
1683 (print_jump): For safety, restart smp loop when cpu_nr >= nr_cpus,
1686 * options.c (print_options): Add printing of WITH_REGPARM and
1689 * std-config.h (WITH_REGPARM, WITH_STDCALL): Provide default
1690 (disabled) values if not defined.
1692 Fri Jul 26 00:36:35 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1694 * ppc-cache-rules (cache): Change RS and RB to cache instead of
1695 compute. The block move instructions use them.
1697 * idecode_expression.h (FPSCR_SET): New macro, set specific FPSCR
1699 (CR_FIELD): New macro, extract specific CR register.
1700 (FPSCR_FIELD): New macro, extract specific FPSCR register.
1702 * registers.h (GPR): New macro, simplify accesses to GPR[i].
1704 * bits.c (INSERTED): Covert INSERTED macro into a function.
1705 (EXTRACTED): Conditionally compile on correct bit size macro.
1707 * bits.h (BIT8): New macro, set a single bit in an 8 bit byte.
1709 * ppc-instructions: With hints from Paul Martin, type in missing
1710 some instruction semantics. Leave disabled for the moment.
1711 (Load Multiple Word): Ditto.
1712 (Store Multiple Word): Ditto.
1713 (Load String Word Immediate): Ditto.
1714 (Load String Word Indexed): Ditto.
1715 (Store String Word Immedate): Ditto.
1716 (Store String Word Indexed): Ditto.
1717 (Move to Condition Register from XER): Ditto.
1718 (Move From Condition Register): Ditto.
1719 (Move From FPSCR): Ditto.
1720 (Move to Condition Register from FPSCR): Ditto.
1721 (Move To FPSCR Field Immediate): Ditto.
1722 (Move To FPSCR Fields): Ditto.
1723 (Move To FPSCR Bit 0): Ditto.
1724 (Move To FPSCR Bit 1): Ditto.
1726 Thu Jul 25 22:10:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1728 * std-config.h (SEMANTICS_INLINE): By default, mask out the
1729 inlining of semantic functions from DEFAULT_INLINE. Almost all
1730 configurations call the semantic code via a pointer so there is
1733 * std-config.h (ICACHE_INLINE): Ditto.
1735 Thu Jul 25 20:07:30 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1737 * configure.in (sim_regparm): Add configuration option for
1738 enabling GCC's regparm attribute.
1739 * (sim_stdcall): Add configuration option for enabling GCC's
1742 * Makefile.in (REGPARM_CFLAGS): Pass regparam configuration onto
1744 * (STDCALL_CFLAGS): Pass stdcall configuration onto compilations.
1746 * std-config.h (REGPARM): Extend construction of REGPARM macro so
1747 that it can include __stdcall__ function attribute.
1749 Wed Jul 24 19:04:20 1996 Andrew Cagney <cagney@sawnoff>
1751 * options.c (print_options): Include SUPPORT_INLINE in information
1754 * gen-idecode.c (print_run_until_stop_body): Only generate loop
1755 termination test if creating idecode_run_until_stop. Push the
1756 loop termination test back into each alternative branch.
1758 Wed Jul 24 15:47:09 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1760 * gen-icache.c (print_icache_function): Have the cache function
1761 always update the cache_entries semantic and address fields.
1763 * gen-idecode.c (print_idecode_switch_illegal): Include a break
1764 when generating illegal instructions. This was commented out
1765 which is a hangover from looking a at switch statements generated
1766 using indirect jumps.
1768 Tue Jul 23 20:57:01 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1770 * igen.c (print_my_defines): Replaces print_define_my_index.
1771 Print both a definition for MY_INDEX and MY_PREFIX.
1772 * gen-icache.c (print_icache_function): Adjust.
1773 * gen-idecode.c (print_jump_insn): Adjust.
1774 * gen-semantics.c (print_c_semantic): Adjust.
1776 * gen-support.c (gen_support_h): Add optional include to created
1777 support.h so that, like cpu, it is optionally inlined for all
1778 modules that include it.
1779 * inline.h, inline.c: Adjust so that support.[hc] is handled the
1782 * idecode_fields.h (LABEL, GOTO): Macro's that create a unique
1783 name for a lable and then branch to it.
1785 * ppc-instructions (convert_to_integer, Floating Round to
1786 Single-Precision, Floating Convert from Integer Doubleword): Use
1787 LABEL and GOTO instead of the recently added switch statements.
1789 Wed Jul 24 14:02:42 1996 Andrew Cagney <cagney@sawnoff.highland.com.au>
1791 * gen-idecode.c (print_run_until_stop_body): Too many rparen in
1794 Tue Jul 23 20:57:01 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1796 * configure.in (--enable-sim-line-nr): Typo - sim_line-nr.
1797 * (--enable-sim-inline): Reorder patern matching of arguments so
1798 that SUPPORT=ALL_INLINE is reconized as *=* and not *_INLINE.
1800 * configure: rebuild.
1802 Mon Jul 22 23:25:08 1996 Andrew Cagney <cagney@highland.com.au>
1804 * configure.in (--enable-sim-hardware, --enable-sim-packages): New
1805 configuration options. Let the user specify the packages or
1806 hardware devices that are to be included in the build. Makes it
1807 possible for user packages to be specified.
1809 * Makefile.in (tmp-pk, tmp-hw): Just use the list of packages and
1810 hardware instead of checking it using ls. configure.in should
1811 have taken care of any problems.
1812 (HW_SRC, HW_OBJ, PACKAGE_SRC, PACKAGE_OBJ): Set by configure.
1814 Mon Jul 22 22:38:59 1996 Andrew Cagney <cagney@highland.com.au>
1816 * psim.c (psim_options): Enter the argument to the memory size
1817 option directly into the device tree. Was using atol() which is
1818 dangerously non portable.
1820 Mon Jul 22 22:17:08 1996 Andrew Cagney <cagney@highland.com.au>
1822 * configure.in (icache): Extend icache flag to include an insn
1823 option. If specifyed the insn - aka instruction - is included in
1824 the instruction cache. Make this the default.
1825 * configure: re-generate.
1827 * igen.c (main), igen.h: Add option -S - inSn - for specifying
1828 that the instruction should be included in the icache.
1830 * gen-icache.c (print_icache_body): If enabled, output code to put
1831 the instruction into the icache.
1832 (print_icache_struct): If enabled, add insn to the icache struct.
1834 Mon Jul 22 20:46:12 1996 Andrew Cagney <cagney@highland.com.au>
1836 * Makefile.in (BUILD_CFLAGS): Include -g when building the
1839 Mon Jul 22 20:00:25 1996 Andrew Cagney <cagney@highland.com.au>
1841 * emul_generic.c (emul_add_tree_options): Was incorrectly setting
1842 the strict-alignment option when hardwired for non-strict
1845 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1847 * gen-semantics.c: Make the my_index variable a macro MY_INDEX.
1849 * ppc-instructions: Adjust so that references are to MY_INDEX and
1852 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1854 * gen-idecode.c: Output the complete run_until_stop function
1855 instead of just the code to handle a single instruction issue.
1856 * : Have the generated idecode.c include inline.c (instead of psim.c).
1858 * std-config.h: Change psim.c so that it isn't inlined (as this is
1861 * psim.c (run_until_stop): Delete the old run_until_stop function
1862 instead calling the idecode_run and idecode_run_until_stop
1863 functions that gen-idecode.c is now creating.
1865 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1867 * dgen.c: Maintenance - update to use new features found in lf.c.
1869 * filter_filename.c (filter_filename): Maintenance - make the
1872 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1874 * debug.c (TRACE, ITRACE, DTRACE): Have GCC instead of CPP
1875 eliminate trace statements.
1877 * debug.c: Change trace format so that it is consistent
1878 (file:line-nr) with CC's error output.
1880 * gen-itable.c (itable_c_insn): Add the source file name and
1881 source line number to the instruction's informational entry.
1883 * debug.c (ITRACE): Use the itable (and my_index) to get the
1884 current instructions name and source line number.
1886 * gen-semantics.c, gen-icache.c: Adjust generated ITRACE calls to
1887 match new interface.
1889 * emul_bugapi.c (emul_bugapi_instruction_call): Adjust
1890 corresponding call to ITRACE so that it still matches.
1892 * idecode_expression.h (ALU_END, CR0_COMPARE): Use TRACE instead
1893 of ITRACE. The CPP line directives would have previously set the
1894 line-nr and file name so ITRACE isn't needed.
1896 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1898 * gen-idecode.c (print_jump_until_stop_body): New function and
1899 idecode generation option. Instead of generating and calling
1900 separate functions containing the semantic and icache code
1901 generate a single monolythic function and use goto's (and GCC's
1902 indirect jump) to move between code blocks.
1904 * Makefile.in: Add sim_jump flag to those passed to igen.
1906 * configure.in: New option --enable-sim-jump (default disabled)
1908 * ppc-instructions: Eliminate any uses of labels and goto's.
1909 These result in duplicate declarations when a single flat function
1912 * ppc-opcode-jump: New file. Set of opcode rules useful when
1913 testing jumping idecodes.
1915 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1917 * gen-idecode.c: Optionally include the semantic code for an
1918 instruction in the function that is doing the decoding.
1920 * igen.c: Add option (-C) to generate semantics in the instruction
1923 * configure.in (--enable-sim-icache): Accept an option list such
1924 as 1024,define. Add a new choice to the list - semantic - which
1925 will cause igen to generate instruction decode functions that
1926 include the corresponding semantic code.
1928 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1930 * configure.in: New option --enable-sim-line-nr (default enabled).
1931 Enable/disable the inclusion of CPP line directives in the
1932 generated files. Such directives refer back to the source files
1933 used when generating the simulator code.
1935 * Makefile.in (sim_line_nr): Pass to igen.
1937 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1939 * igen.c (main): Revamp the options so that more letters are
1942 * configure.in: Adjust to match igen's revamped options
1944 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1946 * Makefile.in (pk.h, hw.h): Rewrite depenencies for hw.h (etc) so
1947 that they use the same technique as igen (ie a dummy targets
1948 tmp-pk and tmp-hw are created).
1950 Mon Jun 24 22:28:00 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1952 * Makefile.in (BUILD_CFLAGS): Include WARNING_CFLAGS.
1954 Wed Jun 19 21:45:28 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1956 * ld-cache.[hc], ld-decode.[hc], ld-insn.[hc]: New files. Separate
1957 out the loading of each of the tables from the rest of igen.
1958 * Makefile.in: Adjust.
1961 * gen-icache.[hc], gen-idecode.[hc], gen-itable.[hc],
1962 gen-model.[hc], gen-semantics.[hc]: New files. Separate out the
1963 code creating each separate set of generated files.
1964 * Makefile.in: Adjust.
1967 * gen-support.[ch]: New files. Output the support functions (found
1968 in the ppc-instructions file) into a separate file.
1970 * inline.h, inline.c: Add.
1971 * std-config.h: Add.
1973 * ld-cache.c: Re-design the cache table format.
1974 * ppc-cache-rules: Update to new format.
1976 * ld-decode.c: Re-design the decode table format.
1977 * ppc-opcode-simple: Update to new format
1978 * ppc-opcode-complex: Ditto
1979 * ppc-opcode-flat: Ditto
1981 * filter.h, filter.c: New files. Separate the opcode filter table
1982 reading code from the rest of igen.c. Re-design the filter so that
1983 it works inclusivly not exclusivly.
1984 * igen.c: Remove the opcode filter table loading code.
1985 * Makefile.in (filter.o): Adjust
1986 * configure.in: Adjust filter flag so that default includes 32bit
1988 * ppc-instructions: Clean up filter fields so that only in use
1989 entries are specifed (ie delete `be').
1991 * misc.c (name2i, i2name): New function. Map between a string and
1994 Mon Jun 17 20:08:03 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1996 * sim_calls.c (sim_close): If simulator not created, skip printing
1999 Mon Jun 17 20:08:03 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2001 * registers.c (register_description): Typo, insns not insn.
2003 * ppc-instructions (model_get_number_of_stalls): New model function,
2004 returns number of stalls for the specified processor.
2005 * psim.c (psim_read_register): Add call to new function
2006 model_get_number_of_stalls().
2008 * ppc-instructions (model_get_number_of_cycles): New model function,
2009 returns number of stalls for the specified processor.
2010 * psim.c (psim_read_register): Add call to new function
2011 model_get_number_of_cycles().
2013 Fri Jun 14 00:11:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2015 * device_table.h: Don't pass the parent device into a devices
2016 create function. This makes the create function consistent with
2018 * device.c (device_template_create_device): Ditto
2019 * hw_pal.c (hw_pal_create): Ditto
2020 * hw_core.c (hw_core_create): Ditto
2021 * hw_vm.c (hw_vm_create): Ditto
2022 * hw_disk.c (hw_disk_create): Ditto
2023 * hw_nvram.c (hw_nvram_create): Ditto
2024 * hw_memory.c (hw_memory_create): Ditto
2025 * hw_cpu.c (hw_cpu_create): Ditto.
2027 * device.c (split_find_device): Allow a null initial parent device.
2028 (device_template_create_device): Ditto.
2030 * device.c (device_create_from): Make local (static) only used
2032 * device_table.h: typedef device_callbacks moved here (from
2033 device.h) where it belongs.
2035 * hw_core.c: New file. Implements just the core device using the
2038 * corefile.c: Moved all core device functions into the new
2039 hw_core.c file. core_device_create() disapears.
2041 * psim.c (psim_tree): Use device_tree_add_parsed() to create the
2044 Thu Jun 13 00:09:29 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2046 * hw_init.c: Correct typo in comment.
2048 * corefile.c (core_init): Remove any remaining references to a
2050 (core_map_find_mapping): Ditto.
2052 Wed Jun 12 22:30:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2054 * corefile.c (core_init): Make function global so that other
2055 devices are able to use the full core object.
2057 * corefile.c (core_create, core_from_device): Break core_create
2058 into two functions. The first creates a core object, the second
2059 returns the core object associated with a core device.
2061 * corefile.c (core_device_create): Use core_create to make the
2064 * psim.c (psim_create): Use core_from_device() instead of
2067 * device.c (device_template_create_device): Make static as only
2068 needed by functions internal to device.c.
2070 Fri Jun 7 23:47:18 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2072 * ppc-opcode-test-2: Remove description of fields.
2073 * ppc-opcode-complex: Ditto
2074 * ppc-opcode-flat: Ditto
2075 * ppc-opcode-simple: Ditto
2076 * ppc-opcode-stupid: Ditto
2077 * ppc-opcode-test-1: Ditto
2078 * ppc-cache-rules: Ditto
2080 * igen.c: Add description of files as a comment at the front.
2082 Wed Jun 26 12:50:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2084 * configure.in: Check for whether the termios and termio
2085 structures are really defined, and whether or not, they define the
2087 * configure: Regenerate.
2089 * Makefile.in ({,TERMIO_}CFLAGS): Add TERMIO_CFLAGS options set by
2092 * emul_unix.c: Various changes to allow for building on systems
2093 with different termio and termios structures. If host has both
2094 termio and termios, just use termios. No longer include
2097 Wed Jun 26 12:26:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2099 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
2100 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
2102 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2103 (AC_PROG_INSTALL): Added.
2104 * configure: Rebuilt.
2106 Wed Jun 5 23:53:42 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2108 * corefile.h: Rewrite documentation so that it can be extracted and
2109 converted into texinfo (and hence ready for translation into html,
2113 Thu Jun 6 09:52:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2115 * hw_disk.c (SEEK_SET): If SEEK_SET is not defined, define as 0.
2117 Wed Jun 5 11:46:52 1996 Andrew Cagney <cagney@puddin>
2119 * hw_disk.c: Include <unistd.h> if available. Under SunOS, that
2120 is the source of SEEK_SET.
2122 Wed Jun 5 01:39:07 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2124 * psim.c (psim_options): Correct type of dummy arguments being
2125 passed to a device_ioctl call.
2127 * hw_init.c (hw_data_init_data_callback): Adjust printf arguments.
2128 (write_stack_arguments): Ditto.
2129 * hw_trace.c: Instance callback entry no longer a table.
2131 Wed Jun 5 01:39:07 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2133 * emul_unix.c (do_unix_umask): Cast printf argument.
2134 (convert_to_linux_termios): Use LINUX_VSWTC not LINUX_VSWCH
2136 Mon Jun 3 15:02:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2138 * hw_init.c (update_for_binary_section): Abort if we find an
2139 .interp section, which indicates the need for shared libraries to
2142 Mon Jun 3 15:02:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2144 * emul_unix.c (do_unix_{time,gettimeofday,getrusage}): Add support
2145 for time, gettimeofday, and getrusage system calls.
2146 ({solaris,linux}_descriptors): Add new system calls.
2147 (do_get{,e}{uid,gid}): Use gid_t/uid_t types.
2148 (do_get{,p}pid): Use pic_t types.
2150 * configure.in (AC_TYPE_{GETGROUPS,SIGNAL}): Define.
2151 (AC_TYPE_{MODE,OFF,PID,SIZE,UID}_T): Define.
2152 * config{.in,ure}: Regenerate.
2154 Mon Jun 3 23:19:57 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2156 * emul_netbsd.c (emul_netbsd_create): Use the more specific names
2157 `ppc-elf' and `ppc-xcoff' for the stack-type.
2158 * emul_unix.c (emul_unix_create): Ditto.
2159 * emul_bugapi.c (emul_bugapi_create): Ditto.
2160 * hw_init.c: Reconize the new names.
2162 * emul_unix.c (do_unix_break): Adjust so that the updated ioctl
2163 call is used (no system parameter).
2165 Sun Jun 2 11:21:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2167 * emul_unix.{h,c}: New files to provide Solaris and Linux system
2170 * Makefile.in (LIB_{SRC,OBJ}): Add emul_unix.{c,o}.
2171 (os_emul.o): Depend on emul_unix.h.
2172 (emul_unix.o): New dependency.
2174 * configure.in (--enable-sim-alignment): Add 0|default to mean set
2175 alignment to 0, which means use appropriate alignment for mode.
2176 (AC_CHECK_FUNCS): Add new functions needed by emul_unix.c.
2177 (AC_CHECK_HEADERS): Add new include files needed by emul_unix.c.
2178 * config.in: Regenerate.
2179 * configure: Regenerate.
2181 * emul_generic.c (emul_write2_status): New function to return
2182 results in r3 and r4 for Solaris system calls.
2183 (emul_do_system_call): If the system call is not support, but
2184 there is a string for the system call name, print out the string
2185 instead of the system call number.
2187 * emul_generic.h (emul_write2_status): Declare it.
2189 * emul_netbsd.c: Use /* */ around comment on #endif.
2191 * os_emul.c: Include emul_unix.h.
2192 (os_emulations): Add emulations for Solaris, and Linux.
2194 * psim.c (psim_usage): Add message about solaris, linux
2197 Thu May 30 00:00:10 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2199 * hw_iobus.c: Tidy up notes so that they can be auto-extracted.
2201 * README: Correct PSIM's title
2203 Wed May 29 23:50:26 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2205 * basics.h: New global type object_disposition, used to indicate
2206 the status of objects when things are restarted.
2208 Fri May 17 17:28:52 1996 Andrew Cagney <cagney@benjimen.highland.com.au>
2210 * device_table.h: Change the interrupt descriptor structure so
2211 that it includes an additional member - an upper bound on the
2212 interrupts by that name.
2214 * device.c (device_interrupt_decode): Allow a range of interrupt
2215 ports (eg rst0 .. rst6) if the port descriptors bound is non zero.
2217 * device.c (device_tree_print_device): Include a list of valid
2218 interrupt ports when listing supported devices.
2220 * device.h, device.c (device_child_interrupt_*): Delete. Not used.
2222 * emul_generic.c (emul_add_tree_hardware): Modify the creation of
2223 the interrupt net so that it uses int0 .. intN.
2225 Tue May 14 23:03:53 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2227 * device.h, device.c (device_ioctl): Drop the system argument.
2228 Devices can not obtain this using the device_system() call.
2229 * device_table.h: Adjust accordingly.
2230 * hw_*.c: Adjust accordingly.
2231 * emul_netbsd.c (do_break): Adjust call to vm device accordingly.
2232 * psim.c (psim_options): Use a device_ioctl call to force the
2233 hw_trace device to update the trace options.
2234 * hw_trace.c: Replace the init function with an ioctl call. Adjust
2237 * psim.c (psim_init): Re-order initialization so that the
2238 os-emulation is initialized after the device tree. Without this,
2239 os-emul's are not able to create instances or access properties
2240 that contain an instance handle.
2242 * device.h, device.c (device_add_*_property): Make these functions
2243 internal to device.c. The user has access to the more generic
2244 device_tree_add_parsed function. Differentiate between the initial
2245 and current value for each property.
2246 * (clean_device_properties): New function that deletes any
2247 properties created after the start of a simulation and restores
2248 the initial value of any others (ignoring ihandles).
2249 * (init_device_properties): (Re)Initialize any properties that
2250 contain ihandles. create
2252 * (device_tree_init): Include calls to clean the device tree's
2253 properties and then initialize them. Document this in the device.h
2256 Mon May 6 17:36:15 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2258 * interrupts.c (decrementer_interrupt): Always pend a decrementer
2259 interrupt even if it is not yet possible to deliver it.
2261 Wed May 1 12:26:51 1996 Andrew Cagney <cagney@benjimen>
2263 * mon.h, mon.c (mon_get_number_of_insns): Make this externally
2264 visable adjusting the arguments so that the interface is correct.
2265 (mon_print_info): Adjust calls.
2267 * registers.h, registers.c (register_description): Add phony
2268 cycle, insn and stall registers.
2270 * psim.c (psim_read_register): Return nr of instructions for given
2273 Tue Apr 30 22:09:09 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2275 * hw_htab.c: New file. Extract contents from disk_table.c.
2276 Contains a device that, during initialization will create a
2277 PowerPC htab in memory.
2278 * hw_register.c: New file. Extract contents from disk_table.c.
2279 Contains a device that, during initialization, will parse its
2280 property list and use that to initialize various processor
2281 registers (not target specific).
2282 * hw_vm.c: New file. Extract contents from disk_table.c. Contains
2283 a device that handles accesses to invalid virtual memory addresses
2285 * hw_init.c: New file. Extract contents from disk_table.c. Misc
2286 devices that can initialize memory from a file.
2287 * hw_trace.c: New file. Extract contents from disk_table.c.
2288 Configure trace options from property values.
2290 * Makefile.in (hw_htab.o, hw_register.o, hw_vm.o, hw_init.o,
2291 hw_trace.c): Add new device files.
2293 * device_table.c: Remove above code, now in separate independant
2296 Fri Apr 26 00:00:07 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2298 * hw_disk.c: New file. Disk and CDROM device.
2300 * Makefile.in (hw_disk.o): Add device hw_disk.c.
2302 * pk_disklabel.c: New file. Implement the miss-named disk-label
2305 * Makefile.in (pk.h): Create the file pk.h that contains a list of all
2308 * Makefile.in (hw.h, hw.c): Add dependancy on Makefile so that
2309 they are re-created when the makefile is updated.
2311 * emul_generic.c (emul_add_tree_hardware): Add a disk device
2312 (below the iobus) to the device tree. Include an ihandle of
2313 the disk as /chosen/disk.
2315 * emul_bugapi.c (emul_bugapi_create): Don't initialize the input,
2316 output and (new) disk handles yet.
2317 * (emul_bugapi_init): Initialize the input, output (and just added)
2319 * (emul_bugapi_do_diskio): New. Performs disk i/o (well at least
2320 what I think the behavour is).
2321 * emul_bugapi.c (emul_bugapi_instruction_call): Add hook to disk
2322 i/o bug call. For RETURN call, exit using gpr[3]'s status even
2323 though this isn't part of the spec - makes it possible for machine
2324 code to signal the aporting of a simulation run.
2326 * emul_chirp.c (chirp_emul_call_method): Add support for the
2327 claim/release methods.
2328 * (chirp_emul_exit): Add an optional exit status argument to
2329 the exit method. Makes it possible for chirp emul simulations
2330 to abort upon an error.
2331 * device.h, device.c (device_instance_claim,
2332 device_instance_release): New methods for claiming and releasing
2334 * hw_memory.c: add claim and release memory methods.
2335 * hw_*: Use the claim memory method when allocating physical
2338 Thu Apr 18 23:38:10 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2340 * hw_nvram.c (hw_nvram_update_clock): Use the current not previous
2341 time when updating the clock.
2343 * hw_nvram.c: Tidy up documentation
2345 Fri May 24 10:08:10 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2347 * configure.in (AC_STRUCT_ST_{BLKSIZE,BLOCKS,RDEV}): Use these
2348 macros to determine whether or not the appropriate st_<xxx> fields
2349 exist in the stat structure.
2350 (AC_CHECK_FUNCS): Check for all unix system calls used, except for
2351 the real basic ones like open, read, write, etc.
2352 * config{.in,ure}: Regenerate.
2354 * emul_netbsd.c: Add support for missing system calls, and/or
2355 missing stat fields.
2356 (MAXPATHLEN): Undefine if including unistd.h, since sys/param.h
2359 * hw_pal.c (WITH_STDIO): Redefine if O_NDELAY, F_GETFL, or F_SETFL
2361 (scan_hw_pal): Do not cause syntax error if O_NDELAY, F_GETFL, or
2362 F_SETFL not defined.
2364 Tue May 21 17:24:45 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2366 * emul_netbsd.c (write_stat): Don't convert st_blocks unless the
2369 Thu May 16 10:56:45 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2371 * configure.in (AC_CHECK_HEADERS): Add sys/ioctl.h.
2372 * config{.in,ure}: Regenerate.
2373 * emul_netbsd.c: If HAVE_SYS_IOCTL_H is not defined, don't include
2376 Tue May 7 17:28:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2378 * hw_pal.c (hw_pal_instance_read_callback): Remove unused
2381 * misc.c ({,target_}a2i): Rewrite to not use strtoul.
2383 * Makefile.in ({spreg,misc}.o): Add dependency on .c file.
2384 ({i,d}gen): Don't link in liberity. Use BUILD_LIBS instead of
2387 Mon May 6 11:31:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2389 * hw_pal.c (hw_pal_instance_read_callback): If using stdio, use
2390 fgets to read line. If not using stdio, do a simple blocking read
2393 Fri May 3 15:07:42 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2395 * Makefile.in: Correctly build simulator for build machine != host
2398 Tue Apr 30 18:46:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2400 * configure.in (--enable-hostendian): Rework so the default uses
2401 the AC_C_BIGENDIAN results. Only run AC_C_BIGENDIAN if not cross
2403 * configure: Regenerate.
2405 * sim-endian.h: Add more tests for host endian to support more
2406 platforms in a cross compilation environment.
2408 Wed Apr 17 14:38:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2410 * hw_pal.c ({scan,write}_hw_pal): If WITH_STDIO == DO_USE_STDIO,
2411 use stdio, instead of unpended read/printf_filtered.
2412 (hw_pal_instance_write_callback): If WITH_STDIO == DO_USE_STDIO,
2413 flush stdout after writing the characters.
2415 * options.c (print_options): Print out WITH_STDIO.
2417 * Makefile.in (STDIO_CFLAGS): Pass on result of @sim_stdio@
2418 configuration variable.
2419 (CONFIG_CFLAGS): Include STDIO_CFLAGS.
2420 (hw.{c,h}): Allow for source dir != build dir, and for HW_SRC
2421 files to contain directory pieces.
2423 * std-config.h (DO{,NT}_USE_STDIO): New flags for whether we
2424 should use stdio for console input.
2425 (WITH_STDIO): If not defined, define as DONT_USE_STDIO.
2427 * configure.in (--enable-sim-stdio): Add new switch to control
2428 whether stdio is used for console I/O.
2429 * configure: Regenerate.
2431 * interrupts.c (external_interrupt): Declare it to be
2432 INLINE_INTERRUPTS, not INLINE_CPU.
2434 Mon Apr 15 23:30:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2436 * events.c (insert_event_entry): Allow events to be scheduled
2437 *NOW* (at delta time 0). Add assertions to clarify behavour of
2440 * events.c (update_time_from_event): New function. Calculates the
2441 number of ticks from the next event. Use this.
2443 Sun Apr 14 21:39:45 1996 Andrew Cagney <cagney@highland.com.au>
2445 * emul_netbsd.c (do_break): Return 0 if success (instead of
2448 * device_table.c (vm_ioctl_callback): Don't return adjusted break
2451 Sun Apr 14 21:32:41 1996 Andrew Cagney <cagney@highland.com.au>
2453 * device_table.h: Change type of the device ioctl so that it
2454 returns an int (status).
2455 * device.h (device_ioctl): Ditto.
2456 * device.c (device_ioctl): Ditto.
2458 * device_table.c (stack_ioctl_callback): Return 0 status.
2459 (vm_ioctl_callback): Ditto
2461 Sat Apr 13 00:00:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2463 * emul_netbsd.c (do_read): Correctly set the return value.
2466 (do_geteuid): Ditto.
2468 (do_getegid): Ditto.
2470 (do_sigprocmask): Ditto.
2473 (do_gettimeofday): Ditto.
2474 (do_getrusage): Ditto.
2478 (do___sysctl): Ditto.
2480 Fri Apr 12 20:56:47 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2482 * device_table.c (vm_ioctl_callback): Don't access the processor
2483 registers directly, instead leave it to the caller to handle this.
2485 * emul_netbsd.c (do_break): Which calls vm_ioctl_callback to
2486 perform a break. Pass in the new break value and set the
2487 registers according to the result.
2489 * emul_generic.c (emul_write_status): Change so that r3 contains
2490 either status or errno and failure is indicated by SO.
2492 Thu Apr 4 23:03:38 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2494 * emul_bugapi.c (emul_bugapi_create): More strict check of OEA
2497 Thu Apr 4 20:58:05 1996 Andrew Cagney <cagney@highland.com.au>
2499 * interrupts.h (interrupts): New structure contains state of
2502 * cpu.c (cpu_interrupts): New function. Pending interrupt status
2503 in the cpu and grant access to it. Add interrupts to cpu
2506 Fri Mar 29 22:09:25 1996 Andrew Cagney <cagney@highland.com.au>
2508 * device.c (device_tree_add_parsed): Check that the creation of a
2509 device instance worked before using it.
2511 * psim.c (psim_halt): Remove cia argument from psim_halt. This
2512 function does not save the CIA so do not pass it in.
2514 Fri Mar 29 21:30:56 1996 Andrew Cagney <cagney@highland.com.au>
2516 * hw_pal.c (hw_pal): Merge the halt and icu and console devices
2517 found in device_table.c into a single hack pal.
2519 * device_table.c (halt, icu, console): Delete.
2521 * Makefile.in (hw_pal.o): New dependency.
2523 * emul_generic.c (emul_add_tree_hardware): Re-arange device tree
2524 so that it uses the pal instead of the icu/halt/console devices.
2525 Wire the pal's interrupt ports up to the cpu nodes.
2527 Fri Mar 29 20:17:17 1996 Andrew Cagney <cagney@highland.com.au>
2529 * hw_iobus.c (hw_iobus_attach_address_callback): Move from
2530 device_table.c to here.
2532 * Makefile.in (hw_iobus.o): New dependency.
2534 Fri Mar 29 12:17:58 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2536 * emul_bugapi.c (_os_emul_data): Add fields for output, input.
2537 (emul_bugapi_create): Create input, output from /chosen/stdin and
2539 (emul_bugapi_do_{read,write}): Switch to use device_instance
2541 (emul_bugapi_instruction_call): Change calls to
2542 emul_bugapi_do_{read,write} to pass device instance argument.
2544 Tue Mar 26 14:57:58 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2546 * igen.c (idecode_switch_end): Fix 2/26 change so that an extra
2547 default is not written out if a default was already written.
2549 * psim.c (psim_{read,write}_register): Use sizeof unsigned_8 to
2550 size cooked_buf, not sizeof natural_word, since floating point
2551 registers are 8 bytes.
2553 Mon Mar 25 22:07:13 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2555 * configure: Regenerate with autoconf 2.9.
2557 Thu Mar 21 00:14:26 1996 Andrew Cagney <cagney@highland.com.au>
2559 * device_table.h: Always include string headers.
2561 Thu Mar 21 00:06:09 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2563 * main.c (error): Be careful to not try to print out statistics
2564 when the simulation was never created.
2566 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
2568 * basics.h: Move the event queue's definition to here so that it
2569 can be refered to globally with out importing all of events.h.
2571 * psim.h, psim.c (psim_event_queue): New function. Grant access
2572 to the simulation event queue. Will make this the single point of
2573 access (there is after all only one event queue in the
2576 * cpu.c (cpu_create): Use psim_event_queue to obtain the event
2577 queue instead of it being passed in. No longer allow access to
2578 the cpu's copy of the event queue.
2580 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
2582 * events.h, events.c (event_handler): Remove event_queue from
2583 arguments passed to an event handler. That argument is redundant
2584 - the `data' should refer to a data structure that contains the
2585 event queue if queing is needed.
2587 * cpu.c (cpu_decrement_event): adjust
2589 * events.c (event_queue_process): adjust
2591 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
2593 * device.h, device.c (device_system): New, returns a handle for
2594 the system given the device.
2596 * device.c (device_address_init): Store a pointer back to the
2597 system in each devices node.
2599 * device_table.h: Don't pass `system' into each device when it is
2600 being initialized, this is now available using device_system(me).
2602 * device.c (device_address_init, device_data_init): Adjust.
2604 * hw_cpu.c, hw_nvram.c, hw_memory.c, hw_eeprom.c, device_table.c:
2607 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
2609 * interrupts.c (decrementer_interrupt, external_interrupt):
2610 Remember that an interrupt wasn't delivered so that it can be
2613 * interrupts.c (check_masked_interrupt): New function. (re)
2614 checks for the posibility that a recent change to the MSR may have
2615 made it possible to deliver an interrupt that was previously
2616 masked be the EE bit.
2618 * ppc-instructions (mtmsr, mfmsr, rfi): Check for posibility of
2619 a pending interrupt being delivered using check_masked_interrupt().
2621 * cpu.c (cpu_decrement_event): Just call decrementer_interrupt()
2622 leaving it to that module to handle both interrupt synchronization
2625 * cpu.c (struct _cpu): remove variables that were going to record
2626 pending decrementer and external interrupts.
2628 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
2630 * hw_cpu.c, hw_cpu.h: New files. Implement a device that sits
2631 between the interrupt controller and the simulators internal
2632 processor model. Maps device interrupts onto the processor
2633 interrupt function calls.
2635 Mon Mar 4 06:06:54 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2637 * hw_nvram.c: NVRAM device that includes a real-time clock that is
2638 updated each second.
2640 Mon Mar 4 04:18:50 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2642 * device.h (attach_type): Remove attach_default type address
2643 spaces. Will replace with levels of callback memory.
2645 * corefile.h, corefile.c (new_core_mapping), corefile.c
2646 (core_map_attach): Replace default attach with a layerd callback
2649 Sun Mar 3 03:58:46 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2651 * device.c (split_property_specifier): ensure that only a single
2653 (split_value): New function, parses the value part of a device
2656 * device.c (device_tree_add_parsed): Use the interrupt conversion
2657 functions to determine the interrupt port numbers.
2659 * device_table.h: Add table that maps between an interrupts
2660 symbolic name and its port number.
2662 * device.h, device.c (device_interrupt_decode,
2663 device_interrupt_encode): new functions use the recently added
2664 interrupt port name/number tables to perform conversion.
2666 Sun Mar 3 03:23:59 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2668 * device.h, device.c (device_set_array_property,
2669 device_set_boolean_property, device_set_ihandle_property,
2670 device_set_integer_property, device_set_string_property): New
2671 functions - allow the value of a given property to be changed.
2673 * device.h, device.c: Re-order declaration and definition of
2676 Sun Mar 3 03:10:22 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2678 * device.c (device_tree_print_device, device_tree_add_parsed):
2679 Remove references to phandle properties.
2681 Wed Feb 28 00:43:07 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
2683 * Makefile.in (corefile.o): missing dependency on device_table.h
2686 Tue Feb 27 23:59:35 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
2688 * device_table.h: Revamp device init callbacks so that they are a
2690 * device.c (device_init_data, device_init_address): If an init
2691 callback is NULL assume it should do nothing.
2692 * device_table.c (ignore_device_init, unimp_device_init): delete
2694 * device_table.c, hw_memory.c: adjust.
2698 * (device_instance): ditto.
2700 * (address nee config_address): ditto.
2701 * (interrupt): ditto.
2703 Mon Feb 26 21:11:20 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
2705 * igen.c (idecode_switch_end): Output a default entry when the
2706 switch statement is perfect. Firstly stops GCC complaining about
2707 an incomplete switch and secondly it will be eliminated by a good
2710 Mon Feb 26 22:47:15 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
2712 * Makefile.in (hw.h, hw.c): New targets. Create from the list of
2713 hw_*.c files. hw.h declares a device descriptor table for each hw
2714 device while hw.c lists those tables in a form suitable for the
2715 construction of a top leveltable in device_table.c.
2717 * Makefile.in (device_table.o): now depends on hw.c a generated
2720 * device_table.c (device_table): Re-arange the table of devices so
2721 that two levels are possible. Make use of hw.c.
2722 * device_table.h: ditto.
2724 * device.c (device_template_create_device): Handle new two level
2725 device lookup table.
2726 * device.c (device_usage): ditto.
2728 Mon Feb 26 22:24:00 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
2730 * device_table.c: Delete the memory device (moved to hw_memory.c).
2732 * hw_memory.c: New file. Just an OpenBoot memory device.
2734 Wed Jan 17 21:47:34 1996 Andrew Cagney <cagney@highland.com.au>
2736 * device.c (device_init_address): New. Split initialization into
2737 two stages, address and address spaces
2738 * device.c (device_init_data): New. ... and data or other work.
2739 With out this, devices try to modify memory before it as been
2742 * device.c (device_tree_init): Update to perform staged
2745 * device.c (device_init): Delete.
2747 Wed Jan 17 21:43:09 1996 Andrew Cagney <cagney@highland.com.au>
2749 * device_table.c (data_*): Rewrite to make heaver use of property
2750 nodes. Allow initialization by different data types.
2751 * device_table.c (htab_* pte_*): Rewrite to use properties.
2753 * emul_chirp.c (emul_chirp_create): Use
2754 * emul_bugapi.c (emul_bugapi_create): Ditto
2755 * emul_netbsd.c (emul_netbsd_create): Ditto
2757 Wed Jan 17 21:24:50 1996 Andrew Cagney <cagney@highland.com.au>
2759 * emul_generic.c (emul_add_tree_options): Annotate existing tree
2760 with options that haven't yet been specified.
2761 * emul_generic.c (emul_add_tree_hardware): Annotate existing tree
2762 with demo devices and properties.
2764 * emul_chirp.c (emul_chirp_create): Update to use new
2765 device_tree_add_parsed call and additional information now
2766 included in the device tree. Use emul_add_tree* functions to add
2767 any missing details.
2768 * emul_bugapi.c (emul_bugapi_create): Ditto
2769 * emul_netbsd.c (emul_netbsd_create): Ditto
2771 Wed Jan 17 21:18:27 1996 Andrew Cagney <cagney@highland.com.au>
2773 * device.c (device_instance_create): New. Create/delete and
2774 operate on instances of a device.
2775 * device.c (device_instance_delete): Ditto
2776 * device.c (device_instance_read): Ditto
2777 * device.c (device_instance_write): Ditto
2778 * device.c (device_instance_seek): Ditto
2779 * device.c (device_instance_data): Ditto
2780 * device.c (device_instance_name): Ditto
2781 * device.c (device_instance_path): Ditto
2783 * emul_chirp.c (chirp_emul_open): Implement using device_instance.
2784 * emul_chirp.c (chirp_emul_close): Ditto
2785 * emul_chirp.c (chirp_emul_read): Ditto
2786 * emul_chirp.c (chirp_emul_write): Ditto
2787 * emul_chirp.c (chirp_emul_seek): Ditto
2789 * emul_chirp.c (chirp_read_t2h_args): Read arguments from device.
2790 Being careful to convert all from target to host byte order.
2791 * emul_chirp.c (chirp_write_h2t_args): Converse.
2793 Wed Jan 17 20:07:15 1996 Andrew Cagney <cagney@highland.com.au>
2795 * device.c (device_tree_add_parsed): New. Rewrite code to add
2796 devices to the device tree so that a single printf style function
2799 * device.c (device_tree_add_*): Delete. Replaced by above.
2801 * device.c (split_device_specifier): Functions to manipulate a
2802 device specifier (path) breaking it into its components
2803 * device.c (split_property_specifier): Ditto
2804 * device.c (split_device_name): Ditto
2805 * device.c (split_find_device): Ditto
2807 * device.c (scan_*): Delete
2809 * device.c (device_tree_find_device): Rewrite to use above.
2810 * device.c (device_add_property): Ditto
2812 Wed Jan 17 19:51:56 1996 Andrew Cagney <cagney@highland.com.au>
2814 * psim.c(psim_options): Parse the psim options, installing their
2815 value in the device tree. Options are now first entered into a
2816 device tree and then extracted out again when needed. This allows
2817 greater flexability in configuration.
2819 * psim.c (psim_tree): Returns a basic device tree ready for
2820 parsing by psim_options.
2821 * psim.c (psim_usage): New. Give usage to varing levels of detail
2822 according to the verbosity. In turn output device and trace
2825 * main.c (main): Update to use new system
2826 * sim_calls.c (sim_open, sim_do_command): Ditto
2828 * psim.c (psim_options): Add `r' option - ram size.
2829 * psim.c (psim_options): Add `o' option - openboot tree entry.
2830 * psim.c (psim_options): Add `h'/`H' options - more help.
2832 * debug.c (trace_usage): Add more detailed help.
2833 * device.c (device_usage): New. Output help including a list of
2834 the devices currently available in the device table.
2835 * device_table.c: Add usage operator to each device.
2837 * corefile.c (core_create, core_device_create): Adjust so that the
2838 core device is created earlier for psim_tree(). Core can later be
2841 * psim.c (psim_create): Update to handle above way of creating
2842 things. Extract all information from the device tree.
2844 * device_tree.c (trace_*): New device node, its properties are
2845 used to set the value of the trace options. Init this device (in
2846 psim_options) when ever the options are updated.
2848 Wed Jan 17 19:46:07 1996 Andrew Cagney <cagney@highland.com.au>
2850 * debug.h: Add trace_print_info, trace_print_device_tree and
2851 trace_dump_device_tree. The first is a replacement for the
2852 variable `print_info' found in main.c and sim_calls.c. The latter
2853 two enable the dumping of the entire device tree.
2855 * debug.c: Add to trace_description table.
2857 * main.c (main): Use above trace instead of local variable
2858 * sim_calls.c (sim_close): Ditto
2860 * device.c (device_tree_print_device): New. Prints the device
2861 tree in a format that is consistent with what can be parsed by the
2862 device tree load from file code.
2864 * psim.c (psim_create): Dump device tree if enabled. If nump
2865 selected, exit psim immediatly.
2867 Wed Jan 17 19:36:52 1996 Andrew Cagney <cagney@highland.com.au>
2869 * corefile-n.h (core_map_read_N): When mapping from an address to
2870 a device, do not subtract the devices base. The device its self
2871 can do this. Brings the behavour into line with OpenBoot.
2872 * corefile-n.h (core_map_write_N): Ditto
2873 * corefile.c (core_map_read_buffer): Ditto
2874 * corefile.c (core_map_write_buffer): Ditto
2876 * device_table.c (console_io_read_buffer_callback): Adjust to
2877 handle biased address.
2878 * device_table.c (console_io_write_buffer_callback): Ditto
2880 Wed Jan 17 18:36:09 1996 Andrew Cagney <cagney@highland.com.au>
2882 * device.c (attach_device_interrupt_edge): New. Interrupt model
2883 did not allow interrupts to be wired up as a general net (edges).
2884 Re-implement so that interrupt events can be passed to multiple
2885 controllers and interrupt controllers can further propogate
2888 * device.c (attach_device_interrupt_edge) : New, Ditto
2889 * device.c (detach_device_interrupt_edge) : New, Ditto
2890 * device.c (clean_device_interrupt_edges) : New, Ditto
2891 * device.c (device_interrupt_event) : New, Ditto
2892 * device.c (device_interrupt_attach) : New, Ditto
2893 * device.c (device_interrupt_detach) : New, Ditto
2894 * device.c (device_child_interrupt_attach) : New, Ditto
2895 * device.c (device_child_interrupt_detach) : New, Ditto
2897 * device.c (device_attach_interrupt) : Delete old
2898 * device.c (device_detach_interrupt) : Delete old
2899 * device.c (device_interrupt) : Delete old
2900 * device.c (device_interrupt_ack) : Delete old
2902 * device_table.c (unimp_*) : Update to match
2904 * device_table.c (icu_io_write_buffer_callback) : Update to use
2906 * device_table.c (icu_interrupt_event_callback) : Ditto
2908 Wed Jan 17 18:18:40 1996 Andrew Cagney <cagney@highland.com.au>
2910 * device.c (external_to_device) : New function that provides a
2911 standard mapping between a devices internal representation (a
2912 pointer) and its external (or what is passed to a client)
2913 representation (a phandle). Implement using the cap object
2914 attached to the root node.
2916 * device.c (device_to_external) : Ditto
2917 * device.c (external_to_device_instance) : Ditto but for ihandle
2918 and device instance.
2919 * device.c (device_instance_to_external) : Ditto
2921 * Makefile (device.o): Add dependency on cap.
2923 * emul_chirp.c (struct _emul_chirp_data) : Elimate use of cap. Code
2924 needing to translate between internal and external representations
2925 changed to use the external_to_device et.al. device operations.
2926 * emul_chirp.c (chirp_emul_*) : Ditto
2928 * Makefile (emul_chirp.o): Remove dependency on cap
2930 Sat Jan 6 10:13:26 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
2932 * emul_chirp.c (map_over_chirp_note): Tighten up (and fix) checks
2933 on OpenBoot note section.
2935 Fri Jan 5 20:28:53 1996 Andrew Cagney <cagney@hignland.com.au>
2937 * emul_generic.c (emul_write_buffer): Use vm faulting byte
2938 read/write calls for buffer transfers. This will cause a fault to
2939 occure if the transfer fails. CHRP catches the fault while the
2940 others suffer the consequences.
2941 (emul_read_buffer): Ditto.
2942 (emul_write_word): Ditto.
2943 (emul_read_word): Ditto.
2944 (emul_read_string): Ditto.
2946 Fri Jan 5 18:55:34 1996 Andrew Cagney <cagney@highland.com.au>
2948 * emul_chirp.c (emul_chirp_create, emul_chirp_instruction_call),
2949 emul_generic (emul_blr_instruction): Use a real blr instruction to
2950 return from a client service call.
2952 * emul_chirp.c (services): Add all OpenBoot services to table.
2954 * emul_generic.h, emul_bugapi.c (emul_bugapi_create), emul_chirp.c
2955 (emul_chirp_create) : Use names instead of numbers for
2956 instructions being stored in memory.
2958 Fri Jan 5 18:52:28 1996 Andrew Cagney <cagney@highland.com.au>
2960 * Makefile.in (maintainer-clean): Remove .log, core and *.core
2961 (From NetBSD) files.
2963 Wed May 29 22:57:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2965 * ChangeLog.00, ChangeLog: ChangeLog from gdb-4.16 becomes