3 # Guess values for system-dependent variables and create Makefiles.
4 # Generated automatically using autoconf version 2.8
5 # Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
7 # This configure script is free software; the Free Software Foundation
8 # gives unlimited permission to copy, distribute and modify it.
12 ac_default_prefix
=/usr
/local
13 # Any additions from configure.in:
15 --enable-sim-cflags=opts Extra CFLAGS for use in building simulator"
17 --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o"
19 --enable-sim-config=file Override default config file"
21 --enable-sim-opcode=which Override default opcode lookup."
23 --enable-sim-switch Use a switch instead of a table for instruction call."
25 --enable-sim-duplicate Expand (duplicate) semantic functions."
27 --enable-sim-filter=rule Specify filter rules."
29 --enable-sim-icache=size Specify instruction cache size."
31 --enable-sim-inline=inlines Specify which functions should be inlined."
33 --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums."
35 --enable-sim-endian=endian Specify target byte endian orientation."
37 --enable-sim-hostendain=end Specify host byte endian orientation."
39 --enable-sim-smp=n Specify number of processors to configure for."
41 --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8)."
43 --enable-sim-bitsize=n Specify target bitsize (32 or 64)."
45 --enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64)."
47 --enable-sim-env=env Specify target environment (operating, virtual, user)."
49 --enable-sim-timebase Specify whether the PPC timebase is supported."
51 --enable-sim-alignment=align Specify strict or nonstrict alignment."
53 --enable-sim-trace Specify whether tracing is supported."
55 --enable-sim-assert Specify whether to perform random assertions."
57 --enable-sim-reserved-bits Specify whether to check reserved bits in instruction."
59 --enable-sim-float Specify whether to use host floating point or simulate."
61 --enable-sim-monitor=mon Specify whether to enable monitoring events."
63 --enable-sim-model=which Specify PowerPC to model."
65 --enable-sim-default-model=which Specify default PowerPC to model."
67 --enable-sim-model-issue Specify whether to simulate model specific actions"
69 --enable-sim-stdio Specify whether to use stdio for console input/output."
71 # Initialize some variables set by options.
72 # The variables have the same names as the options, with
73 # dashes changed to underlines.
75 cache_file
=.
/config.cache
84 program_transform_name
=s
,x
,x
,
92 bindir
='${exec_prefix}/bin'
93 sbindir
='${exec_prefix}/sbin'
94 libexecdir
='${exec_prefix}/libexec'
95 datadir
='${prefix}/share'
96 sysconfdir
='${prefix}/etc'
97 sharedstatedir
='${prefix}/com'
98 localstatedir
='${prefix}/var'
99 libdir
='${exec_prefix}/lib'
100 includedir
='${prefix}/include'
101 oldincludedir
='/usr/include'
102 infodir
='${prefix}/info'
103 mandir
='${prefix}/man'
105 # Initialize some other variables.
113 # If the previous option needs an argument, assign it.
114 if test -n "$ac_prev"; then
115 eval "$ac_prev=\$ac_option"
121 -*=*) ac_optarg
=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
125 # Accept the important Cygnus configure options, so we can diagnose typos.
129 -bindir |
--bindir |
--bindi |
--bind |
--bin |
--bi)
131 -bindir=* |
--bindir=* |
--bindi=* |
--bind=* |
--bin=* |
--bi=*)
132 bindir
="$ac_optarg" ;;
134 -build |
--build |
--buil |
--bui |
--bu)
136 -build=* |
--build=* |
--buil=* |
--bui=* |
--bu=*)
137 build
="$ac_optarg" ;;
139 -cache-file |
--cache-file |
--cache-fil |
--cache-fi \
140 |
--cache-f |
--cache- |
--cache |
--cach |
--cac |
--ca |
--c)
141 ac_prev
=cache_file
;;
142 -cache-file=* |
--cache-file=* |
--cache-fil=* |
--cache-fi=* \
143 |
--cache-f=* |
--cache-=* |
--cache=* |
--cach=* |
--cac=* |
--ca=* |
--c=*)
144 cache_file
="$ac_optarg" ;;
146 -datadir |
--datadir |
--datadi |
--datad |
--data |
--dat |
--da)
148 -datadir=* |
--datadir=* |
--datadi=* |
--datad=* |
--data=* |
--dat=* \
150 datadir
="$ac_optarg" ;;
152 -disable-* |
--disable-*)
153 ac_feature
=`echo $ac_option|sed -e 's/-*disable-//'`
154 # Reject names that are not valid shell variable names.
155 if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
156 { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
158 ac_feature
=`echo $ac_feature| sed 's/-/_/g'`
159 eval "enable_${ac_feature}=no" ;;
161 -enable-* |
--enable-*)
162 ac_feature
=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
163 # Reject names that are not valid shell variable names.
164 if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
165 { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
167 ac_feature
=`echo $ac_feature| sed 's/-/_/g'`
172 eval "enable_${ac_feature}='$ac_optarg'" ;;
174 -exec-prefix |
--exec_prefix |
--exec-prefix |
--exec-prefi \
175 |
--exec-pref |
--exec-pre |
--exec-pr |
--exec-p |
--exec- \
176 |
--exec |
--exe |
--ex)
177 ac_prev
=exec_prefix
;;
178 -exec-prefix=* |
--exec_prefix=* |
--exec-prefix=* |
--exec-prefi=* \
179 |
--exec-pref=* |
--exec-pre=* |
--exec-pr=* |
--exec-p=* |
--exec-=* \
180 |
--exec=* |
--exe=* |
--ex=*)
181 exec_prefix
="$ac_optarg" ;;
183 -gas |
--gas |
--ga |
--g)
184 # Obsolete; use --with-gas.
187 -help |
--help |
--hel |
--he)
188 # Omit some internal or obsolete options to make the list less imposing.
189 # This message is too long to be a string in the A/UX 3.1 sh.
191 Usage: configure [options] [host]
192 Options: [defaults in brackets after descriptions]
194 --cache-file=FILE cache test results in FILE
195 --help print this message
196 --no-create do not create output files
197 --quiet, --silent do not print \`checking...' messages
198 --version print the version of autoconf that created configure
199 Directory and file names:
200 --prefix=PREFIX install architecture-independent files in PREFIX
202 --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
204 --bindir=DIR user executables in DIR [EPREFIX/bin]
205 --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
206 --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
207 --datadir=DIR read-only architecture-independent data in DIR
209 --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
210 --sharedstatedir=DIR modifiable architecture-independent data in DIR
212 --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
213 --libdir=DIR object code libraries in DIR [EPREFIX/lib]
214 --includedir=DIR C header files in DIR [PREFIX/include]
215 --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
216 --infodir=DIR info documentation in DIR [PREFIX/info]
217 --mandir=DIR man documentation in DIR [PREFIX/man]
218 --srcdir=DIR find the sources in DIR [configure dir or ..]
219 --program-prefix=PREFIX prepend PREFIX to installed program names
220 --program-suffix=SUFFIX append SUFFIX to installed program names
221 --program-transform-name=PROGRAM
222 run sed PROGRAM on installed program names
226 --build=BUILD configure for building on BUILD [BUILD=HOST]
227 --host=HOST configure for HOST [guessed]
228 --target=TARGET configure for TARGET [TARGET=HOST]
229 Features and packages:
230 --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
231 --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
232 --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
233 --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
234 --x-includes=DIR X include files are in DIR
235 --x-libraries=DIR X library files are in DIR
237 if test -n "$ac_help"; then
238 echo "--enable and --with options recognized:$ac_help"
242 -host |
--host |
--hos |
--ho)
244 -host=* |
--host=* |
--hos=* |
--ho=*)
247 -includedir |
--includedir |
--includedi |
--included |
--include \
248 |
--includ |
--inclu |
--incl |
--inc)
249 ac_prev
=includedir
;;
250 -includedir=* |
--includedir=* |
--includedi=* |
--included=* |
--include=* \
251 |
--includ=* |
--inclu=* |
--incl=* |
--inc=*)
252 includedir
="$ac_optarg" ;;
254 -infodir |
--infodir |
--infodi |
--infod |
--info |
--inf)
256 -infodir=* |
--infodir=* |
--infodi=* |
--infod=* |
--info=* |
--inf=*)
257 infodir
="$ac_optarg" ;;
259 -libdir |
--libdir |
--libdi |
--libd)
261 -libdir=* |
--libdir=* |
--libdi=* |
--libd=*)
262 libdir
="$ac_optarg" ;;
264 -libexecdir |
--libexecdir |
--libexecdi |
--libexecd |
--libexec \
265 |
--libexe |
--libex |
--libe)
266 ac_prev
=libexecdir
;;
267 -libexecdir=* |
--libexecdir=* |
--libexecdi=* |
--libexecd=* |
--libexec=* \
268 |
--libexe=* |
--libex=* |
--libe=*)
269 libexecdir
="$ac_optarg" ;;
271 -localstatedir |
--localstatedir |
--localstatedi |
--localstated \
272 |
--localstate |
--localstat |
--localsta |
--localst \
273 |
--locals |
--local |
--loca |
--loc |
--lo)
274 ac_prev
=localstatedir
;;
275 -localstatedir=* |
--localstatedir=* |
--localstatedi=* |
--localstated=* \
276 |
--localstate=* |
--localstat=* |
--localsta=* |
--localst=* \
277 |
--locals=* |
--local=* |
--loca=* |
--loc=* |
--lo=*)
278 localstatedir
="$ac_optarg" ;;
280 -mandir |
--mandir |
--mandi |
--mand |
--man |
--ma |
--m)
282 -mandir=* |
--mandir=* |
--mandi=* |
--mand=* |
--man=* |
--ma=* |
--m=*)
283 mandir
="$ac_optarg" ;;
286 # Obsolete; use --without-fp.
289 -no-create |
--no-create |
--no-creat |
--no-crea |
--no-cre \
293 -no-recursion |
--no-recursion |
--no-recursio |
--no-recursi \
294 |
--no-recurs |
--no-recur |
--no-recu |
--no-rec |
--no-re |
--no-r)
297 -oldincludedir |
--oldincludedir |
--oldincludedi |
--oldincluded \
298 |
--oldinclude |
--oldinclud |
--oldinclu |
--oldincl |
--oldinc \
299 |
--oldin |
--oldi |
--old |
--ol |
--o)
300 ac_prev
=oldincludedir
;;
301 -oldincludedir=* |
--oldincludedir=* |
--oldincludedi=* |
--oldincluded=* \
302 |
--oldinclude=* |
--oldinclud=* |
--oldinclu=* |
--oldincl=* |
--oldinc=* \
303 |
--oldin=* |
--oldi=* |
--old=* |
--ol=* |
--o=*)
304 oldincludedir
="$ac_optarg" ;;
306 -prefix |
--prefix |
--prefi |
--pref |
--pre |
--pr |
--p)
308 -prefix=* |
--prefix=* |
--prefi=* |
--pref=* |
--pre=* |
--pr=* |
--p=*)
309 prefix
="$ac_optarg" ;;
311 -program-prefix |
--program-prefix |
--program-prefi |
--program-pref \
312 |
--program-pre |
--program-pr |
--program-p)
313 ac_prev
=program_prefix
;;
314 -program-prefix=* |
--program-prefix=* |
--program-prefi=* \
315 |
--program-pref=* |
--program-pre=* |
--program-pr=* |
--program-p=*)
316 program_prefix
="$ac_optarg" ;;
318 -program-suffix |
--program-suffix |
--program-suffi |
--program-suff \
319 |
--program-suf |
--program-su |
--program-s)
320 ac_prev
=program_suffix
;;
321 -program-suffix=* |
--program-suffix=* |
--program-suffi=* \
322 |
--program-suff=* |
--program-suf=* |
--program-su=* |
--program-s=*)
323 program_suffix
="$ac_optarg" ;;
325 -program-transform-name |
--program-transform-name \
326 |
--program-transform-nam |
--program-transform-na \
327 |
--program-transform-n |
--program-transform- \
328 |
--program-transform |
--program-transfor \
329 |
--program-transfo |
--program-transf \
330 |
--program-trans |
--program-tran \
331 |
--progr-tra |
--program-tr |
--program-t)
332 ac_prev
=program_transform_name
;;
333 -program-transform-name=* |
--program-transform-name=* \
334 |
--program-transform-nam=* |
--program-transform-na=* \
335 |
--program-transform-n=* |
--program-transform-=* \
336 |
--program-transform=* |
--program-transfor=* \
337 |
--program-transfo=* |
--program-transf=* \
338 |
--program-trans=* |
--program-tran=* \
339 |
--progr-tra=* |
--program-tr=* |
--program-t=*)
340 program_transform_name
="$ac_optarg" ;;
342 -q |
-quiet |
--quiet |
--quie |
--qui |
--qu |
--q \
343 |
-silent |
--silent |
--silen |
--sile |
--sil)
346 -sbindir |
--sbindir |
--sbindi |
--sbind |
--sbin |
--sbi |
--sb)
348 -sbindir=* |
--sbindir=* |
--sbindi=* |
--sbind=* |
--sbin=* \
350 sbindir
="$ac_optarg" ;;
352 -sharedstatedir |
--sharedstatedir |
--sharedstatedi \
353 |
--sharedstated |
--sharedstate |
--sharedstat |
--sharedsta \
354 |
--sharedst |
--shareds |
--shared |
--share |
--shar \
356 ac_prev
=sharedstatedir
;;
357 -sharedstatedir=* |
--sharedstatedir=* |
--sharedstatedi=* \
358 |
--sharedstated=* |
--sharedstate=* |
--sharedstat=* |
--sharedsta=* \
359 |
--sharedst=* |
--shareds=* |
--shared=* |
--share=* |
--shar=* \
361 sharedstatedir
="$ac_optarg" ;;
363 -site |
--site |
--sit)
365 -site=* |
--site=* |
--sit=*)
368 -srcdir |
--srcdir |
--srcdi |
--srcd |
--src |
--sr)
370 -srcdir=* |
--srcdir=* |
--srcdi=* |
--srcd=* |
--src=* |
--sr=*)
371 srcdir
="$ac_optarg" ;;
373 -sysconfdir |
--sysconfdir |
--sysconfdi |
--sysconfd |
--sysconf \
374 |
--syscon |
--sysco |
--sysc |
--sys |
--sy)
375 ac_prev
=sysconfdir
;;
376 -sysconfdir=* |
--sysconfdir=* |
--sysconfdi=* |
--sysconfd=* |
--sysconf=* \
377 |
--syscon=* |
--sysco=* |
--sysc=* |
--sys=* |
--sy=*)
378 sysconfdir
="$ac_optarg" ;;
380 -target |
--target |
--targe |
--targ |
--tar |
--ta |
--t)
382 -target=* |
--target=* |
--targe=* |
--targ=* |
--tar=* |
--ta=* |
--t=*)
383 target
="$ac_optarg" ;;
385 -v |
-verbose |
--verbose |
--verbos |
--verbo |
--verb)
388 -version |
--version |
--versio |
--versi |
--vers)
389 echo "configure generated by autoconf version 2.8"
393 ac_package
=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
394 # Reject names that are not valid shell variable names.
395 if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
396 { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
398 ac_package
=`echo $ac_package| sed 's/-/_/g'`
403 eval "with_${ac_package}='$ac_optarg'" ;;
405 -without-* |
--without-*)
406 ac_package
=`echo $ac_option|sed -e 's/-*without-//'`
407 # Reject names that are not valid shell variable names.
408 if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
409 { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
411 ac_package
=`echo $ac_package| sed 's/-/_/g'`
412 eval "with_${ac_package}=no" ;;
415 # Obsolete; use --with-x.
418 -x-includes |
--x-includes |
--x-include |
--x-includ |
--x-inclu \
419 |
--x-incl |
--x-inc |
--x-in |
--x-i)
420 ac_prev
=x_includes
;;
421 -x-includes=* |
--x-includes=* |
--x-include=* |
--x-includ=* |
--x-inclu=* \
422 |
--x-incl=* |
--x-inc=* |
--x-in=* |
--x-i=*)
423 x_includes
="$ac_optarg" ;;
425 -x-libraries |
--x-libraries |
--x-librarie |
--x-librari \
426 |
--x-librar |
--x-libra |
--x-libr |
--x-lib |
--x-li |
--x-l)
427 ac_prev
=x_libraries
;;
428 -x-libraries=* |
--x-libraries=* |
--x-librarie=* |
--x-librari=* \
429 |
--x-librar=* |
--x-libra=* |
--x-libr=* |
--x-lib=* |
--x-li=* |
--x-l=*)
430 x_libraries
="$ac_optarg" ;;
432 -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
436 if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
437 echo "configure: warning: $ac_option: invalid host type" 1>&2
439 if test "x$nonopt" != xNONE
; then
440 { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
448 if test -n "$ac_prev"; then
449 { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
452 trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
454 # File descriptor usage:
457 # 2 errors and warnings
458 # 3 some systems may open it to /dev/tty
459 # 4 used on the Kubota Titan
460 # 6 checking for... messages and results
461 # 5 compiler messages saved in config.log
462 if test "$silent" = yes; then
470 This file contains any messages produced by compilers while
471 running configure, to aid debugging if configure makes a mistake.
474 # Strip out --no-create and --no-recursion so they do not pile up.
475 # Also quote any args containing shell metacharacters.
480 -no-create |
--no-create |
--no-creat |
--no-crea |
--no-cre \
481 |
--no-cr |
--no-c) ;;
482 -no-recursion |
--no-recursion |
--no-recursio |
--no-recursi \
483 |
--no-recurs |
--no-recur |
--no-recu |
--no-rec |
--no-re |
--no-r) ;;
484 *" "*|
*" "*|
*[\
[\
]\~\
#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
485 ac_configure_args
="$ac_configure_args '$ac_arg'" ;;
486 *) ac_configure_args
="$ac_configure_args $ac_arg" ;;
491 # Only set LANG and LC_ALL to C if already set.
492 # These must not be set unconditionally because not all systems understand
493 # e.g. LANG=C (notably SCO).
494 if test "${LC_ALL+set}" = set; then LC_ALL
=C
; export LC_ALL
; fi
495 if test "${LANG+set}" = set; then LANG
=C
; export LANG
; fi
497 # confdefs.h avoids OS command line length limits that DEFS can exceed.
498 rm -rf conftest
* confdefs.h
499 # AIX cpp loses on an empty file, so make sure it contains at least a newline.
502 # A filename unique to this package, relative to the directory that
503 # configure is in, which we can look for to find out if srcdir is correct.
504 ac_unique_file
=Makefile.
in
506 # Find the source files, if location was not specified.
507 if test -z "$srcdir"; then
508 ac_srcdir_defaulted
=yes
509 # Try the directory containing this script, then its parent.
511 ac_confdir
=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
512 test "x$ac_confdir" = "x$ac_prog" && ac_confdir
=.
514 if test ! -r $srcdir/$ac_unique_file; then
518 ac_srcdir_defaulted
=no
520 if test ! -r $srcdir/$ac_unique_file; then
521 if test "$ac_srcdir_defaulted" = yes; then
522 { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
524 { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
527 srcdir
=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
529 # Prefer explicitly selected file to automatically selected ones.
530 if test -z "$CONFIG_SITE"; then
531 if test "x$prefix" != xNONE
; then
532 CONFIG_SITE
="$prefix/share/config.site $prefix/etc/config.site"
534 CONFIG_SITE
="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
537 for ac_site_file
in $CONFIG_SITE; do
538 if test -r "$ac_site_file"; then
539 echo "loading site script $ac_site_file"
544 if test -r "$cache_file"; then
545 echo "loading cache $cache_file"
548 echo "creating cache $cache_file"
553 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
554 ac_cpp
='$CPP $CPPFLAGS'
555 ac_compile
='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
556 ac_link
='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
558 if (echo "testing\c"; echo 1,2,3) |
grep c
>/dev
/null
; then
559 # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
560 if (echo -n testing
; echo 1,2,3) |
sed s
/-n/xn
/ |
grep xn
>/dev
/null
; then
567 ac_n
= ac_c
='\c' ac_t
=
572 # Extract the first word of "gcc", so it can be a program name with args.
573 set dummy gcc
; ac_word
=$2
574 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
575 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
576 echo $ac_n "(cached) $ac_c" 1>&6
578 if test -n "$CC"; then
579 ac_cv_prog_CC
="$CC" # Let the user override the test.
581 IFS
="${IFS= }"; ac_save_ifs
="$IFS"; IFS
="${IFS}:"
582 for ac_dir
in $PATH; do
583 test -z "$ac_dir" && ac_dir
=.
584 if test -f $ac_dir/$ac_word; then
593 if test -n "$CC"; then
594 echo "$ac_t""$CC" 1>&6
596 echo "$ac_t""no" 1>&6
599 if test -z "$CC"; then
600 # Extract the first word of "cc", so it can be a program name with args.
601 set dummy cc
; ac_word
=$2
602 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
603 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
604 echo $ac_n "(cached) $ac_c" 1>&6
606 if test -n "$CC"; then
607 ac_cv_prog_CC
="$CC" # Let the user override the test.
609 IFS
="${IFS= }"; ac_save_ifs
="$IFS"; IFS
="${IFS}:"
611 for ac_dir
in $PATH; do
612 test -z "$ac_dir" && ac_dir
=.
613 if test -f $ac_dir/$ac_word; then
614 if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
623 if test $ac_prog_rejected = yes; then
624 # We found a bogon in the path, so make sure we never use it.
625 set dummy
$ac_cv_prog_CC
627 if test $# -gt 0; then
628 # We chose a different compiler from the bogus one.
629 # However, it has the same basename, so the bogon will be chosen
630 # first if we set CC to just the basename; use the full file name.
632 set dummy
"$ac_dir/$ac_word" "$@"
640 if test -n "$CC"; then
641 echo "$ac_t""$CC" 1>&6
643 echo "$ac_t""no" 1>&6
646 test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
649 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
650 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
651 echo $ac_n "(cached) $ac_c" 1>&6
653 cat > conftest.c
<<EOF
658 if { ac_try
='${CC-cc} -E conftest.c'; { (eval echo configure
:659: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } |
egrep yes >/dev
/null
2>&1; then
665 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
666 if test $ac_cv_prog_gcc = yes; then
668 if test "${CFLAGS+set}" != set; then
669 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
670 if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
671 echo $ac_n "(cached) $ac_c" 1>&6
673 echo 'void f(){}' > conftest.c
674 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
683 echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
684 if test $ac_cv_prog_gcc_g = yes; then
692 test "${CFLAGS+set}" = set || CFLAGS
="-g"
696 # Put a plausible default for CC_FOR_BUILD in Makefile.
697 # If we cannot run a trivial program, we must be cross compiling.
698 echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
699 if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
700 echo $ac_n "(cached) $ac_c" 1>&6
702 if test "$cross_compiling" = yes; then
705 cat > conftest.
$ac_ext <<EOF
706 #line 707 "configure"
707 #include "confdefs.h"
710 { (eval echo configure
:711: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
711 if test -s conftest
&& (.
/conftest
; exit) 2>/dev
/null
; then
720 echo "$ac_t""$ac_cv_c_cross" 1>&6
721 cross_compiling
=$ac_cv_c_cross
723 if test "x$cross_compiling" = "xno"; then
729 # Check whether --enable-sim-cflags or --disable-sim-cflags was given.
730 if test "${enable_sim_cflags+set}" = set; then
731 enableval
="$enable_sim_cflags"
732 case "${enableval}" in
733 yes) sim_cflags
="-O2 -fomit-frame-pointer";;
735 *) sim_cflags
=`echo "${enableval}" | sed -e "s/,/ /g"`;;
737 if test x
"$silent" != x
"yes" && test x
"$sim_cflags" != x
""; then
738 echo "Setting sim cflags = $sim_cflags" 6>&1
744 # Check whether --enable-sim-warnings or --disable-sim-warnings was given.
745 if test "${enable_sim_warnings+set}" = set; then
746 enableval
="$enable_sim_warnings"
747 case "${enableval}" in
748 yes) sim_warnings
="-Werror -Wall -Wpointer-arith -Wmissing-prototypes";;
749 no
) sim_warnings
="-w";;
750 *) sim_warnings
=`echo "${enableval}" | sed -e "s/,/ /g"`;;
752 if test x
"$silent" != x
"yes" && test x
"$sim_warnings" != x
""; then
753 echo "Setting warning flags = $sim_warnings" 6>&1
759 # Check whether --enable-sim-config or --disable-sim-config was given.
760 if test "${enable_sim_config+set}" = set; then
761 enableval
="$enable_sim_config"
762 case "${enableval}" in
763 yes|no
) { echo "configure: error: "No value supplied
for --enable-sim-config=file"" 1>&2; exit 1; };;
764 *) if test -f "${srcdir}/${enableval}"; then
765 sim_config
="${enableval}";
766 elif test -f "${srcdir}/${enableval}-config.h"; then
767 sim_config
="${enableval}-config.h"
769 { echo "configure: error: "Config
file $enableval was not found
"" 1>&2; exit 1; };
770 sim_config
=std-config.h
773 if test x
"$silent" != x
"yes" && test x
"$sim_config" != x
""; then
774 echo "Setting config flags = $sim_config" 6>&1
777 sim_config
="std-config.h"
778 if test x
"$silent" != x
"yes"; then
779 echo "Setting config flags = $sim_config" 6>&1
783 # Check whether --enable-sim-opcode or --disable-sim-opcode was given.
784 if test "${enable_sim_opcode+set}" = set; then
785 enableval
="$enable_sim_opcode"
786 case "${enableval}" in
787 yes|no
) { echo "configure: error: "No value supplied
for --enable-sim-opcode=file"" 1>&2; exit 1; };;
788 *) if test -f "${srcdir}/${enableval}"; then
789 sim_opcode
="${enableval}"
790 elif test -f "${srcdir}/ppc-opcode-${enableval}"; then
791 sim_opcode
="ppc-opcode-${enableval}"
793 { echo "configure: error: "File
$enableval is not an opcode rules
file"" 1>&2; exit 1; };
794 sim_opcode
="ppc-opcode-complex"
797 if test x
"$silent" != x
"yes" && test x
"$sim_opcode" != x
""; then
798 echo "Setting opcode flags = $sim_opcode" 6>&1
801 sim_opcode
="ppc-opcode-complex"
802 if test x
"$silent" != x
"yes"; then
803 echo "Setting opcode flags = $sim_opcode"
807 # Check whether --enable-sim-switch or --disable-sim-switch was given.
808 if test "${enable_sim_switch+set}" = set; then
809 enableval
="$enable_sim_switch"
810 case "${enableval}" in
811 yes) sim_switch
="-s";;
813 *) { echo "configure: error: "--enable-sim-switch does not take a value
"" 1>&2; exit 1; }; sim_switch
="";;
815 if test x
"$silent" != x
"yes" && test x
"$sim_switch" != x
""; then
816 echo "Setting switch flags = $sim_switch" 6>&1
820 if test x
"$silent" != x
"yes"; then
821 echo "Setting switch flags = $sim_switch" 6>&1
825 # Check whether --enable-sim-duplicate or --disable-sim-duplicate was given.
826 if test "${enable_sim_duplicate+set}" = set; then
827 enableval
="$enable_sim_duplicate"
828 case "${enableval}" in
831 *) { echo "configure: error: "--enable-sim-duplicate does not take a value
"" 1>&2; exit 1; }; sim_dup
="";;
833 if test x
"$silent" != x
"yes" && test x
"$sim_dup" != x
""; then
834 echo "Setting duplicate flags = $sim_dup" 6>&1
838 if test x
"$silent" != x
"yes"; then
839 echo "Setting duplicate flags = $sim_dup" 6>&1
843 # Check whether --enable-sim-filter or --disable-sim-filter was given.
844 if test "${enable_sim_filter+set}" = set; then
845 enableval
="$enable_sim_filter"
846 case "${enableval}" in
847 yes) { echo "configure: error: "--enable-sim-filter must be specified with a rule to filter or no
"" 1>&2; exit 1; }; sim_filter
="";;
849 *) sim_filter
="-f $enableval";;
851 if test x
"$silent" != x
"yes" && test x
"$sim_filter" != x
""; then
852 echo "Setting filter flags = $sim_filter" 6>&1
856 if test x
"$silent" != x
"yes"; then
857 echo "Setting filter flags = $sim_filter" 6>&1
861 # Check whether --enable-sim-icache or --disable-sim-icache was given.
862 if test "${enable_sim_icache+set}" = set; then
863 enableval
="$enable_sim_icache"
865 case "${enableval}" in
866 yes) sim_icache
="-r 1024"; icache
="1024";;
867 define
) sim_icache
="-r 1024 -R"; icache
="1024";;
869 *) sim_icache
="-r ${enableval}"; icache
="${enableval}";;
871 if test x
"$silent" != x
"yes" && test x
"$icache" != x
""; then
872 echo "Setting instruction cache size to $icache"
876 if test x
"$silent" != x
"yes"; then
877 echo "Setting instruction cache size to 1024"
881 # Check whether --enable-sim-inline or --disable-sim-inline was given.
882 if test "${enable_sim_inline+set}" = set; then
883 enableval
="$enable_sim_inline"
886 no
) sim_inline
="-DDEFAULT_INLINE=0";;
887 0) sim_inline
="-DDEFAULT_INLINE=0";;
888 yes |
2) sim_inline
="-DDEFAULT_INLINE=ALL_INLINE";;
889 1) sim_inline
="-DDEFAULT_INLINE=INLINE_LOCALS";;
890 *) for x
in `echo "$enableval" | sed -e "s/,/ /g"`; do
893 *_INLINE
=*) new_flag
="-D$x";;
894 *_INLINE
) new_flag
="-D$x=ALL_INLINE";;
895 *=*) new_flag
=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
896 *) new_flag
="-D$x""_INLINE=ALL_INLINE";;
898 if test x
"$sim_inline" = x
""; then
899 sim_inline
="$new_flag"
901 sim_inline
="$sim_inline $new_flag"
905 if test x
"$silent" != x
"yes" && test x
"$sim_inline" != x
""; then
906 echo "Setting inline flags = $sim_inline" 6>&1
909 if test x
"$GCC" != ""; then
910 sim_inline
="-DDEFAULT_INLINE=INLINE_LOCALS"
911 if test x
"$silent" != x
"yes"; then
912 echo "Setting inline flags = $sim_inline" 6>&1
919 # Check whether --enable-sim-bswap or --disable-sim-bswap was given.
920 if test "${enable_sim_bswap+set}" = set; then
921 enableval
="$enable_sim_bswap"
922 case "${enableval}" in
923 yes) sim_bswap
="-DWITH_BSWAP=1";;
924 no
) sim_bswap
="-DWITH_BSWAP=0";;
925 *) { echo "configure: error: "--enable-sim-bswap does not take a value
"" 1>&2; exit 1; }; sim_bswap
="";;
927 if test x
"$silent" != x
"yes" && test x
"$sim_bswap" != x
""; then
928 echo "Setting bswap flags = $sim_bswap" 6>&1
934 # Check whether --enable-sim-endian or --disable-sim-endian was given.
935 if test "${enable_sim_endian+set}" = set; then
936 enableval
="$enable_sim_endian"
937 case "${enableval}" in
938 yes) case "$target" in
939 *powerpc-
*) sim_endian
="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
940 *powerpcle-
*) sim_endian
="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
941 *) echo "Unknown target $target" 1>&6; sim_endian
="-DWITH_TARGET_BYTE_ORDER=0";;
943 no
) sim_endian
="-DWITH_TARGET_BYTE_ORDER=0";;
944 b
*|B
*) sim_endian
="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
945 l
*|L
*) sim_endian
="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
946 *) { echo "configure: error: "Unknown value
$enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian
="";;
948 if test x
"$silent" != x
"yes" && test x
"$sim_endian" != x
""; then
949 echo "Setting endian flags = $sim_endian" 6>&1
955 # Check whether --enable-sim-hostendian or --disable-sim-hostendian was given.
956 if test "${enable_sim_hostendian+set}" = set; then
957 enableval
="$enable_sim_hostendian"
958 case "${enableval}" in
959 no
) sim_hostendian
="-DWITH_HOST_BYTE_ORDER=0";;
960 b
*|B
*) sim_hostendian
="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
961 l
*|L
*) sim_hostendian
="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
962 *) { echo "configure: error: "Unknown value
$enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian
="";;
964 if test x
"$silent" != x
"yes" && test x
"$sim_hostendian" != x
""; then
965 echo "Setting hostendian flags = $sim_hostendian" 6>&1
969 if test "x$cross_compiling" = "xno"; then
970 echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
971 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
972 echo $ac_n "(cached) $ac_c" 1>&6
974 ac_cv_c_bigendian
=unknown
975 # See if sys/param.h defines the BYTE_ORDER macro.
976 cat > conftest.
$ac_ext <<EOF
977 #line 978 "configure"
978 #include "confdefs.h"
979 #include <sys/types.h>
980 #include <sys/param.h>
981 int main() { return 0; }
984 #if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
989 if { (eval echo configure
:990: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
991 # It does; now see whether it defined to BIG_ENDIAN or not.
992 cat > conftest.
$ac_ext <<EOF
993 #line 994 "configure"
994 #include "confdefs.h"
995 #include <sys/types.h>
996 #include <sys/param.h>
997 int main() { return 0; }
1000 #if BYTE_ORDER != BIG_ENDIAN
1005 if { (eval echo configure
:1006: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
1007 ac_cv_c_bigendian
=yes
1010 ac_cv_c_bigendian
=no
1017 if test $ac_cv_c_bigendian = unknown
; then
1018 if test "$cross_compiling" = yes; then
1019 { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
1021 cat > conftest.
$ac_ext <<EOF
1022 #line 1023 "configure"
1023 #include "confdefs.h"
1025 /* Are we little or big endian? From Harbison&Steele. */
1029 char c[sizeof (long)];
1032 exit (u.c[sizeof (long) - 1] == 1);
1035 { (eval echo configure
:1036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
1036 if test -s conftest
&& (.
/conftest
; exit) 2>/dev
/null
; then
1037 ac_cv_c_bigendian
=no
1039 ac_cv_c_bigendian
=yes
1046 echo "$ac_t""$ac_cv_c_bigendian" 1>&6
1047 if test $ac_cv_c_bigendian = yes; then
1048 cat >> confdefs.h
<<\EOF
1049 #define WORDS_BIGENDIAN 1
1053 echo ac_cv_c_bigendian
= $ac_cv_c_bigendian
1054 if test $ac_cv_c_bigendian = yes; then
1055 sim_hostendian
="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
1057 sim_hostendian
="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
1060 sim_hostendian
="-DWITH_HOST_BYTE_ORDER=0"
1064 # Check whether --enable-sim-smp or --disable-sim-smp was given.
1065 if test "${enable_sim_smp+set}" = set; then
1066 enableval
="$enable_sim_smp"
1067 case "${enableval}" in
1068 yes) sim_smp
="-DWITH_SMP=5";;
1069 no
) sim_smp
="-DWITH_SMP=0";;
1070 *) sim_smp
="-DWITH_SMP=$enableval";;
1072 if test x
"$silent" != x
"yes" && test x
"$sim_smp" != x
""; then
1073 echo "Setting smp flags = $sim_smp" 6>&1
1076 sim_smp
="-DWITH_SMP=5"
1077 if test x
"$silent" != x
"yes"; then
1078 echo "Setting smp flags = $sim_smp" 6>&1
1082 # Check whether --enable-sim-xor-endian or --disable-sim-xor-endian was given.
1083 if test "${enable_sim_xor_endian+set}" = set; then
1084 enableval
="$enable_sim_xor_endian"
1085 case "${enableval}" in
1086 yes) sim_xor_endian
="-DWITH_XOR_ENDIAN=8";;
1087 no
) sim_xor_endian
="-DWITH_XOR_ENDIAN=0";;
1088 *) sim_xor_endian
="-DWITH_XOR_ENDIAN=$enableval";;
1090 if test x
"$silent" != x
"yes" && test x
"$sim_xor_endian" != x
""; then
1091 echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
1097 # Check whether --enable-sim-bitsize or --disable-sim-bitsize was given.
1098 if test "${enable_sim_bitsize+set}" = set; then
1099 enableval
="$enable_sim_bitsize"
1100 case "${enableval}" in
1101 32|
64) sim_bitsize
="-DWITH_TARGET_WORD_BITSIZE=$enableval";;
1102 *) { echo "configure: error: "--enable-sim-bitsize was given
$enableval" 1>&2; exit 1; }; sim_bitsize="";;
1104 if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
1105 echo "Setting bitsize flags
= $sim_bitsize" 6>&1
1111 # Check whether --enable-sim-hostbitsize or --disable-sim-hostbitsize was given.
1112 if test "${enable_sim_hostbitsize+set}" = set; then
1113 enableval="$enable_sim_hostbitsize"
1114 case "${enableval}" in
1115 32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";;
1116 *) { echo "configure
: error
: "--enable-sim-hostbitsize was given $enableval" 1>&2; exit 1; }; sim_hostbitsize
="";;
1118 if test x
"$silent" != x
"yes" && test x
"$sim_hostbitsize" != x
""; then
1119 echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1
1125 # Check whether --enable-sim-env or --disable-sim-env was given.
1126 if test "${enable_sim_env+set}" = set; then
1127 enableval
="$enable_sim_env"
1128 case "${enableval}" in
1129 operating | os | oea
) sim_env
="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
1130 virtual | vea
) sim_env
="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
1131 user | uea
) sim_env
="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
1132 no
) sim_env
="-DWITH_ENVIRONMENT=0";;
1133 *) { echo "configure: error: "Unknown value
$enableval passed to
--enable-sim-env"" 1>&2; exit 1; }; sim_env
="";;
1135 if test x
"$silent" != x
"yes" && test x
"$sim_env" != x
""; then
1136 echo "Setting env flags = $sim_env" 6>&1
1142 # Check whether --enable-sim-timebase or --disable-sim-timebase was given.
1143 if test "${enable_sim_timebase+set}" = set; then
1144 enableval
="$enable_sim_timebase"
1145 case "${enableval}" in
1146 yes) sim_timebase
="-DWITH_TIME_BASE=1";;
1147 no
) sim_timebase
="-DWITH_TIME_BASE=0";;
1148 *) { echo "configure: error: "--enable-sim-timebase does not take a value
"" 1>&2; exit 1; }; sim_timebase
="";;
1150 if test x
"$silent" != x
"yes" && test x
"$sim_timebase" != x
""; then
1151 echo "Setting timebase flags = $sim_timebase" 6>&1
1157 # Check whether --enable-sim-alignment or --disable-sim-alignment was given.
1158 if test "${enable_sim_alignment+set}" = set; then
1159 enableval
="$enable_sim_alignment"
1160 case "${enableval}" in
1161 yes | strict | STRICT
) sim_alignment
="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
1162 no | nonstrict | NONSTRICT
) sim_alignment
="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
1163 *) { echo "configure: error: "Unknown value
$enableval passed to
--enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment
="";;
1165 if test x
"$silent" != x
"yes" && test x
"$sim_alignment" != x
""; then
1166 echo "Setting alignment flags = $sim_alignment" 6>&1
1172 # Check whether --enable-sim-trace or --disable-sim-trace was given.
1173 if test "${enable_sim_trace+set}" = set; then
1174 enableval
="$enable_sim_trace"
1175 case "${enableval}" in
1176 yes) sim_trace
="-DWITH_TRACE=1";;
1177 no
) sim_trace
="-DWITH_TRACE=0";;
1178 *) { echo "configure: error: "--enable-sim-trace does not take a value
"" 1>&2; exit 1; }; sim_trace
="";;
1180 if test x
"$silent" != x
"yes" && test x
"$sim_trace" != x
""; then
1181 echo "Setting trace flags = $sim_trace" 6>&1
1187 # Check whether --enable-sim-assert or --disable-sim-assert was given.
1188 if test "${enable_sim_assert+set}" = set; then
1189 enableval
="$enable_sim_assert"
1190 case "${enableval}" in
1191 yes) sim_assert
="-DWITH_ASSERT=1";;
1192 no
) sim_assert
="-DWITH_ASSERT=0";;
1193 *) { echo "configure: error: "--enable-sim-assert does not take a value
"" 1>&2; exit 1; }; sim_assert
="";;
1195 if test x
"$silent" != x
"yes" && test x
"$sim_assert" != x
""; then
1196 echo "Setting assert flags = $sim_assert" 6>&1
1202 # Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given.
1203 if test "${enable_sim_reserved_bits+set}" = set; then
1204 enableval
="$enable_sim_reserved_bits"
1205 case "${enableval}" in
1206 yes) sim_reserved
="-DWITH_RESERVED_BITS=1";;
1207 no
) sim_reserved
="-DWITH_RESERVED_BITS=0";;
1208 *) { echo "configure: error: "--enable-sim-reserved-bits does not take a value
"" 1>&2; exit 1; }; sim_reserved
="";;
1210 if test x
"$silent" != x
"yes" && test x
"$sim_reserved" != x
""; then
1211 echo "Setting reserved flags = $sim_reserved" 6>&1
1217 # Check whether --enable-sim-float or --disable-sim-float was given.
1218 if test "${enable_sim_float+set}" = set; then
1219 enableval
="$enable_sim_float"
1220 case "${enableval}" in
1221 yes | hard
) sim_float
="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
1222 no | soft
) sim_float
="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
1223 *) { echo "configure: error: "Unknown value
$enableval passed to
--enable-sim-float"" 1>&2; exit 1; }; sim_float
="";;
1225 if test x
"$silent" != x
"yes" && test x
"$sim_float" != x
""; then
1226 echo "Setting float flags = $sim_float" 6>&1
1232 # Check whether --enable-sim-monitor or --disable-sim-monitor was given.
1233 if test "${enable_sim_monitor+set}" = set; then
1234 enableval
="$enable_sim_monitor"
1235 case "${enableval}" in
1236 yes) sim_monitor
="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";;
1237 no
) sim_monitor
="-DWITH_MON=0";;
1238 instruction
) sim_monitor
="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";;
1239 memory
) sim_monitor
="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";;
1240 *) { echo "configure: error: "Unknown value
$enableval passed to
--enable-sim-mon"" 1>&2; exit 1; }; sim_env
="";;
1242 if test x
"$silent" != x
"yes" && test x
"$sim_monitor" != x
""; then
1243 echo "Setting monitor flags = $sim_monitor" 6>&1
1249 # Check whether --enable-sim-model or --disable-sim-model was given.
1250 if test "${enable_sim_model+set}" = set; then
1251 enableval
="$enable_sim_model"
1252 case "${enableval}" in
1253 yes|no
) { echo "configure: error: "No value supplied
for --enable-sim-model=model
"" 1>&2; exit 1; };;
1254 *) sim_model
="-DWITH_MODEL=${enableval}";;
1256 if test x
"$silent" != x
"yes" && test x
"$sim_model" != x
""; then
1257 echo "Setting model flags = $sim_model" 6>&1
1263 # Check whether --enable-sim-default-model or --disable-sim-default-model was given.
1264 if test "${enable_sim_default_model+set}" = set; then
1265 enableval
="$enable_sim_default_model"
1266 case "${enableval}" in
1267 yes|no
) { echo "configure: error: "No value supplied
for --enable-sim-default-model=model
"" 1>&2; exit 1; };;
1268 *) sim_default_model
="-DWITH_DEFAULT_MODEL=${enableval}";;
1270 if test x
"$silent" != x
"yes" && test x
"$sim_default_model" != x
""; then
1271 echo "Setting default-model flags = $sim_default_model" 6>&1
1277 # Check whether --enable-sim-model-issue or --disable-sim-model-issue was given.
1278 if test "${enable_sim_model_issue+set}" = set; then
1279 enableval
="$enable_sim_model_issue"
1280 case "${enableval}" in
1281 yes) sim_model_issue
="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";;
1282 no
) sim_model_issue
="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";;
1283 *) { echo "configure: error: "--enable-sim-model-issue does not take a value
"" 1>&2; exit 1; }; sim_model_issue
="";;
1285 if test x
"$silent" != x
"yes"; then
1286 echo "Setting model-issue flags = $sim_model_issue" 6>&1
1292 # Check whether --enable-sim-stdio or --disable-sim-stdio was given.
1293 if test "${enable_sim_stdio+set}" = set; then
1294 enableval
="$enable_sim_stdio"
1295 case "${enableval}" in
1296 yes) sim_stdio
="-DWITH_STDIO=DO_USE_STDIO";;
1297 no
) sim_stdio
="-DWITH_STDIO=DONT_USE_STDIO";;
1298 *) { echo "configure: error: "Unknown value
$enableval passed to
--enable-sim-stdio"" 1>&2; exit 1; }; sim_stdio
="";;
1300 if test x
"$silent" != x
"yes" && test x
"$sim_stdio" != x
""; then
1301 echo "Setting stdio flags = $sim_stdio" 6>&1
1308 for ac_dir
in `cd $srcdir;pwd`/..
/..
$srcdir/`cd $srcdir;pwd`/..
/..
; do
1309 if test -f $ac_dir/install-sh
; then
1311 ac_install_sh
="$ac_aux_dir/install-sh -c"
1313 elif test -f $ac_dir/install.sh
; then
1315 ac_install_sh
="$ac_aux_dir/install.sh -c"
1319 if test -z "$ac_aux_dir"; then
1320 { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; }
1322 ac_config_guess
=$ac_aux_dir/config.guess
1323 ac_config_sub
=$ac_aux_dir/config.sub
1324 ac_configure
=$ac_aux_dir/configure
# This should be Cygnus configure.
1327 # Do some error checking and defaulting for the host and target type.
1329 # configure --host=HOST --target=TARGET --build=BUILD NONOPT
1332 # 1. You are not allowed to specify --host, --target, and nonopt at the
1334 # 2. Host defaults to nonopt.
1335 # 3. If nonopt is not specified, then host defaults to the current host,
1336 # as determined by config.guess.
1337 # 4. Target and build default to nonopt.
1338 # 5. If nonopt is not specified, then target and build default to host.
1340 # The aliases save the names the user supplied, while $host etc.
1341 # will get canonicalized.
1342 case $host---$target---$nonopt in
1343 NONE---
*---* |
*---NONE---* |
*---*---NONE) ;;
1344 *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
1348 # Make sure we can run config.sub.
1349 if $ac_config_sub sun4
>/dev
/null
2>&1; then :
1350 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
1353 echo $ac_n "checking host system type""... $ac_c" 1>&6
1356 case "$host_alias" in
1360 if host_alias
=`$ac_config_guess`; then :
1361 else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
1363 *) host_alias
=$nonopt ;;
1367 host=`$ac_config_sub $host_alias`
1368 host_cpu
=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
1369 host_vendor
=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
1370 host_os
=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
1371 echo "$ac_t""$host" 1>&6
1373 echo $ac_n "checking target system type""... $ac_c" 1>&6
1375 target_alias
=$target
1376 case "$target_alias" in
1379 NONE
) target_alias
=$host_alias ;;
1380 *) target_alias
=$nonopt ;;
1384 target
=`$ac_config_sub $target_alias`
1385 target_cpu
=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
1386 target_vendor
=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
1387 target_os
=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
1388 echo "$ac_t""$target" 1>&6
1390 echo $ac_n "checking build system type""... $ac_c" 1>&6
1393 case "$build_alias" in
1396 NONE
) build_alias
=$host_alias ;;
1397 *) build_alias
=$nonopt ;;
1401 build
=`$ac_config_sub $build_alias`
1402 build_cpu
=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
1403 build_vendor
=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
1404 build_os
=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
1405 echo "$ac_t""$build" 1>&6
1407 test "$host_alias" != "$target_alias" &&
1408 test "$program_prefix$program_suffix$program_transform_name" = \
1410 program_prefix
=${target_alias}-
1412 if test "$program_transform_name" = s
,x
,x
,; then
1413 program_transform_name
=
1415 # Double any \ or $. echo might interpret backslashes.
1416 cat <<\EOF_SED
> conftestsed
1417 s
,\\,\\\\,g
; s
,\$
,$$
,g
1419 program_transform_name
="`echo $program_transform_name|sed -f conftestsed`"
1422 test "$program_prefix" != NONE
&&
1423 program_transform_name
="s,^,${program_prefix},; $program_transform_name"
1424 # Use a double $ so make ignores it.
1425 test "$program_suffix" != NONE
&&
1426 program_transform_name
="s,\$\$,${program_suffix},; $program_transform_name"
1428 # sed with no file args requires a program.
1429 test "$program_transform_name" = "" && program_transform_name
="s,x,x,"
1432 .
${srcdir}/..
/..
/bfd
/configure.
host
1441 # Extract the first word of "ranlib", so it can be a program name with args.
1442 set dummy ranlib
; ac_word
=$2
1443 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1444 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
1445 echo $ac_n "(cached) $ac_c" 1>&6
1447 if test -n "$RANLIB"; then
1448 ac_cv_prog_RANLIB
="$RANLIB" # Let the user override the test.
1450 IFS
="${IFS= }"; ac_save_ifs
="$IFS"; IFS
="${IFS}:"
1451 for ac_dir
in $PATH; do
1452 test -z "$ac_dir" && ac_dir
=.
1453 if test -f $ac_dir/$ac_word; then
1454 ac_cv_prog_RANLIB
="ranlib"
1459 test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB
=":"
1462 RANLIB
="$ac_cv_prog_RANLIB"
1463 if test -n "$RANLIB"; then
1464 echo "$ac_t""$RANLIB" 1>&6
1466 echo "$ac_t""no" 1>&6
1498 for ac_func
in getrusage
1500 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
1501 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
1502 echo $ac_n "(cached) $ac_c" 1>&6
1504 cat > conftest.
$ac_ext <<EOF
1505 #line 1506 "configure"
1506 #include "confdefs.h"
1507 /* System header to define __stub macros and hopefully few prototypes,
1508 which can conflict with char $ac_func(); below. */
1510 /* Override any gcc2 internal prototype to avoid an error. */
1513 int main() { return 0; }
1516 /* The GNU C library defines this for functions which it implements
1517 to always fail with ENOSYS. Some functions are actually named
1518 something starting with __ and the normal name is an alias. */
1519 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
1527 if { (eval echo configure
:1528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
1529 eval "ac_cv_func_$ac_func=yes"
1532 eval "ac_cv_func_$ac_func=no"
1537 if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
1538 echo "$ac_t""yes" 1>&6
1539 ac_tr_func
=HAVE_
`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
1540 cat >> confdefs.h
<<EOF
1541 #define $ac_tr_func 1
1545 echo "$ac_t""no" 1>&6
1550 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
1551 # On Suns, sometimes $CPP names a directory.
1552 if test -n "$CPP" && test -d "$CPP"; then
1555 if test -z "$CPP"; then
1556 if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
1557 echo $ac_n "(cached) $ac_c" 1>&6
1559 # This must be in double quotes, not single quotes, because CPP may get
1560 # substituted into the Makefile and "${CC-cc}" will confuse make.
1562 # On the NeXT, cc -E runs the code through the compiler's parser,
1563 # not just through cpp.
1564 cat > conftest.
$ac_ext <<EOF
1565 #line 1566 "configure"
1566 #include "confdefs.h"
1570 ac_try
="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1571 { (eval echo configure
:1572: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1572 ac_err
=`grep -v '^ *+' conftest.out`
1573 if test -z "$ac_err"; then
1578 CPP
="${CC-cc} -E -traditional-cpp"
1579 cat > conftest.
$ac_ext <<EOF
1580 #line 1581 "configure"
1581 #include "confdefs.h"
1585 ac_try
="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1586 { (eval echo configure
:1587: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1587 ac_err
=`grep -v '^ *+' conftest.out`
1588 if test -z "$ac_err"; then
1598 ac_cv_prog_CPP
="$CPP"
1600 CPP
="$ac_cv_prog_CPP"
1602 ac_cv_prog_CPP
="$CPP"
1604 echo "$ac_t""$CPP" 1>&6
1606 for ac_hdr
in string.h
strings.h stdlib.h
time.h sys
/mount.h sys
/types.h sys
/time.h sys
/times.h unistd.h sys
/resource.h
1608 ac_safe
=`echo "$ac_hdr" | tr './\055' '___'`
1609 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
1610 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
1611 echo $ac_n "(cached) $ac_c" 1>&6
1613 cat > conftest.
$ac_ext <<EOF
1614 #line 1615 "configure"
1615 #include "confdefs.h"
1618 ac_try
="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1619 { (eval echo configure
:1620: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1620 ac_err
=`grep -v '^ *+' conftest.out`
1621 if test -z "$ac_err"; then
1623 eval "ac_cv_header_$ac_safe=yes"
1627 eval "ac_cv_header_$ac_safe=no"
1631 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
1632 echo "$ac_t""yes" 1>&6
1633 ac_tr_hdr
=HAVE_
`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
1634 cat >> confdefs.h
<<EOF
1635 #define $ac_tr_hdr 1
1639 echo "$ac_t""no" 1>&6
1644 for ac_hdr
in dirent.h sys
/ndir.h sys
/dir.h ndir.h
1646 ac_safe
=`echo "$ac_hdr" | tr './\055' '___'`
1647 echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
1648 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
1649 echo $ac_n "(cached) $ac_c" 1>&6
1651 cat > conftest.
$ac_ext <<EOF
1652 #line 1653 "configure"
1653 #include "confdefs.h"
1654 #include <sys/types.h>
1656 int main() { return 0; }
1661 if { (eval echo configure
:1662: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
1663 eval "ac_cv_header_dirent_$ac_safe=yes"
1666 eval "ac_cv_header_dirent_$ac_safe=no"
1671 if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
1672 echo "$ac_t""yes" 1>&6
1673 ac_tr_hdr
=HAVE_
`echo $ac_hdr | tr 'abcdedfghijklmnopqrstuvwxyz./\055' 'ABCDEDFGHIJKLMNOPQRSTUVWXYZ___'`
1674 cat >> confdefs.h
<<EOF
1675 #define $ac_tr_hdr 1
1677 ac_header_dirent
=$ac_hdr; break
1679 echo "$ac_t""no" 1>&6
1682 # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
1683 if test $ac_header_dirent = dirent.h
; then
1684 echo $ac_n "checking for -ldir""... $ac_c" 1>&6
1685 ac_lib_var
=`echo dir_opendir | tr '.-/+' '___p'`
1686 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
1687 echo $ac_n "(cached) $ac_c" 1>&6
1689 ac_save_LIBS
="$LIBS"
1691 cat > conftest.
$ac_ext <<EOF
1692 #line 1693 "configure"
1693 #include "confdefs.h"
1695 int main() { return 0; }
1700 if { (eval echo configure
:1701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
1702 eval "ac_cv_lib_$ac_lib_var=yes"
1705 eval "ac_cv_lib_$ac_lib_var=no"
1708 LIBS
="$ac_save_LIBS"
1711 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
1712 echo "$ac_t""yes" 1>&6
1715 echo "$ac_t""no" 1>&6
1719 echo $ac_n "checking for -lx""... $ac_c" 1>&6
1720 ac_lib_var
=`echo x_opendir | tr '.-/+' '___p'`
1721 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
1722 echo $ac_n "(cached) $ac_c" 1>&6
1724 ac_save_LIBS
="$LIBS"
1726 cat > conftest.
$ac_ext <<EOF
1727 #line 1728 "configure"
1728 #include "confdefs.h"
1730 int main() { return 0; }
1735 if { (eval echo configure
:1736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
1737 eval "ac_cv_lib_$ac_lib_var=yes"
1740 eval "ac_cv_lib_$ac_lib_var=no"
1743 LIBS
="$ac_save_LIBS"
1746 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
1747 echo "$ac_t""yes" 1>&6
1750 echo "$ac_t""no" 1>&6
1757 cat > confcache
<<\EOF
1758 # This file is a shell script that caches the results of configure
1759 # tests run on this system so they can be shared between configure
1760 # scripts and configure runs. It is not useful on other systems.
1761 # If it contains results you don't want to keep, you may remove or edit it.
1763 # By default, configure uses ./config.cache as the cache file,
1764 # creating it if it does not exist already. You can give configure
1765 # the --cache-file=FILE option to use a different cache file; that is
1766 # what configure does when it calls configure scripts in
1767 # subdirectories, so they share the cache.
1768 # Giving --cache-file=/dev/null disables caching, for debugging configure.
1769 # config.status only pays attention to the cache file if you give it the
1770 # --recheck option to rerun configure.
1773 # Ultrix sh set writes to stderr and can't be redirected directly,
1774 # and sets the high bit in the cache file unless we assign to the vars.
1776 sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
1778 if cmp -s $cache_file confcache
; then
1781 if test -w $cache_file; then
1782 echo "updating cache $cache_file"
1783 cat confcache
> $cache_file
1785 echo "not updating unwritable cache $cache_file"
1790 trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
1792 test "x$prefix" = xNONE
&& prefix
=$ac_default_prefix
1793 # Let make expand exec_prefix.
1794 test "x$exec_prefix" = xNONE
&& exec_prefix
='${prefix}'
1796 # Any assignment to VPATH causes Sun make to only execute
1797 # the first set of double-colon rules, so remove it if not needed.
1798 # If there is a colon in the path, we need to keep it.
1799 if test "x$srcdir" = x.
; then
1800 ac_vpsub
='/^[ ]*VPATH[ ]*=[^:]*$/d'
1803 trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
1805 DEFS
=-DHAVE_CONFIG_H
1807 # Without the "./", some shells look in PATH for config.status.
1808 : ${CONFIG_STATUS=./config.status}
1810 echo creating
$CONFIG_STATUS
1811 rm -f $CONFIG_STATUS
1812 cat > $CONFIG_STATUS <<EOF
1814 # Generated automatically by configure.
1815 # Run this file to recreate the current configuration.
1816 # This directory was configured as follows,
1817 # on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
1819 # $0 $ac_configure_args
1821 # Compiler output produced by configure, useful for debugging
1822 # configure, is in ./config.log if it exists.
1824 ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
1827 case "\$ac_option" in
1828 -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
1829 echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
1830 exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
1831 -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
1832 echo "$CONFIG_STATUS generated by autoconf version 2.8"
1834 -help | --help | --hel | --he | --h)
1835 echo "\$ac_cs_usage"; exit 0 ;;
1836 *) echo "\$ac_cs_usage"; exit 1 ;;
1840 ac_given_srcdir=$srcdir
1842 trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
1844 cat >> $CONFIG_STATUS <<EOF
1846 # Protect against being on the right side of a sed subst in config.status.
1847 sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
1848 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
1851 s%@CFLAGS@%$CFLAGS%g
1852 s%@CPPFLAGS@%$CPPFLAGS%g
1853 s%@CXXFLAGS@%$CXXFLAGS%g
1855 s%@LDFLAGS@%$LDFLAGS%g
1857 s%@exec_prefix@%$exec_prefix%g
1858 s%@prefix@%$prefix%g
1859 s%@program_transform_name@%$program_transform_name%g
1860 s%@bindir@%$bindir%g
1861 s%@sbindir@%$sbindir%g
1862 s%@libexecdir@%$libexecdir%g
1863 s%@datadir@%$datadir%g
1864 s%@sysconfdir@%$sysconfdir%g
1865 s%@sharedstatedir@%$sharedstatedir%g
1866 s%@localstatedir@%$localstatedir%g
1867 s%@libdir@%$libdir%g
1868 s%@includedir@%$includedir%g
1869 s%@oldincludedir@%$oldincludedir%g
1870 s%@infodir@%$infodir%g
1871 s%@mandir@%$mandir%g
1874 s%@host_alias@%$host_alias%g
1875 s%@host_cpu@%$host_cpu%g
1876 s%@host_vendor@%$host_vendor%g
1877 s%@host_os@%$host_os%g
1878 s%@target@%$target%g
1879 s%@target_alias@%$target_alias%g
1880 s%@target_cpu@%$target_cpu%g
1881 s%@target_vendor@%$target_vendor%g
1882 s%@target_os@%$target_os%g
1884 s%@build_alias@%$build_alias%g
1885 s%@build_cpu@%$build_cpu%g
1886 s%@build_vendor@%$build_vendor%g
1887 s%@build_os@%$build_os%g
1888 s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
1889 s%@HDEFINES@%$HDEFINES%g
1891 s%@RANLIB@%$RANLIB%g
1892 s%@sim_cflags@%$sim_cflags%g
1893 s%@sim_warnings@%$sim_warnings%g
1894 s%@sim_config@%$sim_config%g
1895 s%@sim_opcode@%$sim_opcode%g
1896 s%@sim_switch@%$sim_switch%g
1897 s%@sim_dup@%$sim_dup%g
1898 s%@sim_filter@%$sim_filter%g
1899 s%@sim_icache@%$sim_icache%g
1900 s%@sim_inline@%$sim_inline%g
1901 s%@sim_bswap@%$sim_bswap%g
1902 s%@sim_endian@%$sim_endian%g
1903 s%@sim_xor_endian@%$sim_xor_endian%g
1904 s%@sim_hostendian@%$sim_hostendian%g
1905 s%@sim_smp@%$sim_smp%g
1906 s%@sim_bitsize@%$sim_bitsize%g
1907 s%@sim_hostbitsize@%$sim_hostbitsize%g
1908 s%@sim_env@%$sim_env%g
1909 s%@sim_timebase@%$sim_timebase%g
1910 s%@sim_alignment@%$sim_alignment%g
1911 s%@sim_float@%$sim_float%g
1912 s%@sim_trace@%$sim_trace%g
1913 s%@sim_assert@%$sim_assert%g
1914 s%@sim_reserved@%$sim_reserved%g
1915 s%@sim_monitor@%$sim_monitor%g
1916 s%@sim_model@%$sim_model%g
1917 s%@sim_default_model@%$sim_default_model%g
1918 s%@sim_model_issue@%$sim_model_issue%g
1919 s%@sim_stdio@%$sim_stdio%g
1924 cat >> $CONFIG_STATUS <<EOF
1926 CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
1928 cat >> $CONFIG_STATUS <<\EOF
1929 for ac_file
in ..
$CONFIG_FILES; do if test "x$ac_file" != x..
; then
1930 # Support "outfile[:infile]", defaulting infile="outfile.in".
1932 *:*) ac_file_in
=`echo "$ac_file"|sed 's%.*:%%'`
1933 ac_file
=`echo "$ac_file"|sed 's%:.*%%'` ;;
1934 *) ac_file_in
="${ac_file}.in" ;;
1937 # Adjust relative srcdir, etc. for subdirectories.
1939 # Remove last slash and all that follows it. Not all systems have dirname.
1940 ac_dir
=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
1941 if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .
; then
1942 # The file is in a subdirectory.
1943 test ! -d "$ac_dir" && mkdir
"$ac_dir"
1944 ac_dir_suffix
="/`echo $ac_dir|sed 's%^\./%%'`"
1945 # A "../" for each directory in $ac_dir_suffix.
1946 ac_dots
=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
1948 ac_dir_suffix
= ac_dots
=
1951 case "$ac_given_srcdir" in
1953 if test -z "$ac_dots"; then top_srcdir
=.
1954 else top_srcdir
=`echo $ac_dots|sed 's%/$%%'`; fi ;;
1955 /*) srcdir
="$ac_given_srcdir$ac_dir_suffix"; top_srcdir
="$ac_given_srcdir" ;;
1957 srcdir
="$ac_dots$ac_given_srcdir$ac_dir_suffix"
1958 top_srcdir
="$ac_dots$ac_given_srcdir" ;;
1961 echo creating
"$ac_file"
1963 configure_input
="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
1965 *Makefile
*) ac_comsub
="1i\\
1966 # $configure_input" ;;
1970 s%@configure_input@%$configure_input%g
1971 s%@srcdir@%$srcdir%g
1972 s%@top_srcdir@%$top_srcdir%g
1973 " -f conftest.subs
$ac_given_srcdir/$ac_file_in > $ac_file
1977 # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
1978 # NAME is the cpp macro being defined and VALUE is the value it is being given.
1980 # ac_d sets the value in "#define NAME VALUE" lines.
1981 ac_dA
='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
1982 ac_dB
='\([ ][ ]*\)[^ ]*%\1#\2'
1985 # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
1986 ac_uA
='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
1987 ac_uB
='\([ ]\)%\1#\2define\3'
1990 # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
1991 ac_eA
='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
1992 ac_eB
='$%\1#\2define\3'
1996 CONFIG_HEADERS
=${CONFIG_HEADERS-"config.h:config.in"}
1997 for ac_file
in ..
$CONFIG_HEADERS; do if test "x$ac_file" != x..
; then
1998 # Support "outfile[:infile]", defaulting infile="outfile.in".
2000 *:*) ac_file_in
=`echo "$ac_file"|sed 's%.*:%%'`
2001 ac_file
=`echo "$ac_file"|sed 's%:.*%%'` ;;
2002 *) ac_file_in
="${ac_file}.in" ;;
2005 echo creating
$ac_file
2007 rm -f conftest.frag conftest.
in conftest.out
2008 cp $ac_given_srcdir/$ac_file_in conftest.
in
2012 # Transform confdefs.h into a sed script conftest.vals that substitutes
2013 # the proper values into config.h.in to produce config.h. And first:
2014 # Protect against being on the right side of a sed subst in config.status.
2015 # Protect against being in an unquoted here document in config.status.
2017 cat > conftest.hdr
<<\EOF
2020 s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
2024 sed -n -f conftest.hdr confdefs.h > conftest.vals
2027 # This sed command replaces #undef with comments. This is necessary, for
2028 # example, in the case of _POSIX_SOURCE, which is predefined and required
2029 # on some systems where configure will not decide to define it.
2030 cat >> conftest.vals <<\EOF
2031 s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
2034 # Break up conftest.vals because some shells have a limit on
2035 # the size of here documents, and old seds have small limits too.
2036 # Maximum number of lines to put in a single here document.
2037 ac_max_here_lines=12
2042 ac_lines=`grep -c . conftest.vals
`
2043 # grep -c gives empty output for an empty file on some AIX systems.
2044 if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
2045 # Write a limited-size here document to conftest.frag.
2046 echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
2047 sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
2049 sed -f conftest.frag conftest.in > conftest.out
2051 mv conftest.out conftest.in
2053 sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
2055 mv conftest.tail conftest.vals
2059 cat >> $CONFIG_STATUS <<\EOF
2060 rm -f conftest.frag conftest.h
2061 echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
2062 cat conftest.in >> conftest.h
2064 if cmp -s $ac_file conftest.h 2>/dev/null; then
2065 echo "$ac_file is unchanged"
2069 mv conftest.h $ac_file
2074 case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac
2077 chmod +x $CONFIG_STATUS
2078 rm -fr confdefs* $ac_clean_files
2079 test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1