sim/sh/ChangeLog

   1 2021-05-16  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * config.in, configure: Regenerate.
   4
   5 2021-05-14  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * interp.c: Update include path.
   8
   9 2021-05-04  Mike Frysinger  <vapier@gentoo.org>
  10
  11         * configure: Regenerate.
  12
  13 2021-05-01  Mike Frysinger  <vapier@gentoo.org>
  14
  15         * config.in, configure: Regenerate.
  16
  17 2021-04-26  Mike Frysinger  <vapier@gentoo.org>
  18
  19         * aclocal.m4, config.in, configure: Regenerate.
  20
  21 2021-04-22  Tom Tromey  <tom@tromey.com>
  22
  23         * interp.c: Update includes.
  24         * configure, config.in: Rebuild.
  25
  26 2021-04-22  Tom Tromey  <tom@tromey.com>
  27
  28         * Makefile.in (SIM_EXTRA_DEPS): New variable.
  29         (interp.o): Remove.
  30
  31 2021-04-22  Tom Tromey  <tom@tromey.com>
  32
  33         * configure: Rebuild.
  34
  35 2021-04-21  Mike Frysinger  <vapier@gentoo.org>
  36
  37         * aclocal.m4: Regenerate.
  38
  39 2021-04-21  Simon Marchi  <simon.marchi@polymtl.ca>
  40
  41         * configure: Regenerate.
  42
  43 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
  44
  45         * configure: Regenerate.
  46
  47 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
  48
  49         * Makefile.in (NL_TARGET): Define.
  50         * interp.c: Change syscall.h include to targ-vals.h.
  51         (trap): Add TARGET_ prefix to all SYS_ constants.
  52         * syscall.h: Removed.
  53
  54 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
  55
  56         * configure: Regenerate.
  57
  58 2021-04-12  Mike Frysinger  <vapier@gentoo.org>
  59
  60         * interp.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
  61
  62 2021-04-02  Mike Frysinger  <vapier@gentoo.org>
  63
  64         * aclocal.m4, configure: Regenerate.
  65
  66 2021-03-13  Mike Frysinger  <vapier@gentoo.org>
  67
  68         * Makefile.in (gencode.o): New rule.
  69         (gencode): Call LINK_FOR_BUILD.
  70
  71 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
  72
  73         * configure: Regenerate.
  74
  75 2021-02-21  Mike Frysinger  <vapier@gentoo.org>
  76
  77         * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
  78         * aclocal.m4, configure: Regenerate.
  79
  80 2021-02-13  Mike Frysinger  <vapier@gentoo.org>
  81
  82         * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
  83         * aclocal.m4, configure: Regenerate.
  84
  85 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
  86
  87         * configure: Regenerate.
  88
  89 2021-01-11  Mike Frysinger  <vapier@gentoo.org>
  90
  91         * config.in, configure: Regenerate.
  92         * interp.c, simops.c: Delete HAVE_STRING_H, HAVE_STRINGS_H,
  93         HAVE_STDLIB_H, HAVE_TIME_H, and strings.h include.
  94
  95 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
  96
  97         * configure: Regenerate.
  98
  99 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
 100
 101         * configure.ac (SIM_AC_OPTION_WARNINGS): Pass "no".
 102         * configure: Regenerate.
 103
 104 2021-01-08  Mike Frysinger  <vapier@gentoo.org>
 105
 106         * configure: Regenerate.
 107
 108 2021-01-04  Mike Frysinger  <vapier@gentoo.org>
 109
 110         * configure: Regenerate.
 111
 112 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 113
 114         * configure: Regenerate.
 115
 116 2017-02-13  Mike Frysinger  <vapier@gentoo.org>
 117
 118         * gencode.c: Include libiberty.h.
 119         (conflict_warn): Use ARRAY_SIZE.
 120         * interp.c (init_dsp): Likewise.
 121
 122 2016-04-10  Oleg Endo  <olegendo@gcc.gnu.org>
 123
 124         * interp.c (dmul): Split into dmul_s and dmul_u.  Use explicit integer
 125         width types and simplify implementation.
 126         * gencode.c (dmuls.l, dmulu.l): Use new functions dmul_s and dmul_u.
 127
 128 2016-04-09  Oleg Endo  <olegendo@gcc.gnu.org>
 129
 130         * interp.c (sim_memory_size): Default init to 30.
 131         (parse_and_set_memory_size): Adjust upper bound to 31.
 132
 133 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 134
 135         * config.in, configure: Regenerate.
 136
 137 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 138
 139         * configure: Regenerate.
 140
 141 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 142
 143         * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
 144         * configure: Regenerate.
 145
 146 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 147
 148         * configure: Regenerate.
 149
 150 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 151
 152         * configure: Regenerate.
 153
 154 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 155
 156         * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
 157         * configure: Regenerate.
 158
 159 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 160
 161         * configure: Regenerate.
 162
 163 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 164
 165         * configure: Regenerate.
 166
 167 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 168
 169         * config.in, configure: Regenerate.
 170
 171 2016-01-06  Mike Frysinger  <vapier@gentoo.org>
 172
 173         * interp.c (sim_open): Mark argv const.
 174         (sim_create_inferior): Mark argv and env const.
 175
 176 2016-01-04  Mike Frysinger  <vapier@gentoo.org>
 177
 178         * configure: Regenerate.
 179
 180 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 181
 182         * interp.c (sim_open): Update sim_parse_args comment.
 183
 184 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 185
 186         * interp.c (count_argc): Delete.
 187         (trap): Change count_argc to countargv.
 188
 189 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 190
 191         * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
 192         * configure: Regenerate.
 193         * interp.c (host_little_endian): Change CURRENT_HOST_BYTE_ORDER
 194         to HOST_BYTE_ORDER.
 195
 196 2016-01-02  Mike Frysinger  <vapier@gentoo.org>
 197
 198         * configure: Regenerate.
 199         * interp.c (target_little_endian): Change LITTLE_ENDIAN to
 200         BFD_ENDIAN_LITTLE.
 201         (host_little_endian): Likewise.
 202
 203 2015-12-30  Mike Frysinger  <vapier@gentoo.org>
 204
 205         * wrapper.c (sim_store_register): Rename to ...
 206         (sh_reg_store): ... this.
 207         (sim_fetch_register): Rename to ...
 208         (sh_reg_fetch): ... this.
 209         (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
 210
 211 2015-12-27  Mike Frysinger  <vapier@gentoo.org>
 212
 213         * Makefile.in (SIM_OBJS): Delete sim-hload.o.
 214
 215 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 216
 217         * config.in, configure: Regenerate.
 218
 219 2015-11-21  Mike Frysinger  <vapier@gentoo.org>
 220
 221         * gencode.c (tab): Pass sd into trap calls.
 222         * interp.c (prog_argv, callback): Delete.
 223         (parse_and_set_memory_size): Add SIM_DESC arg.
 224         (trap): Declare callback and prog_argv.
 225         (sim_resume): Declare callback.
 226         (sim_info): Change callback->printf_filtered calls to sim_io_printf.
 227         (sim_open): Delete callback assignment.  Pass sd to
 228         parse_and_set_memory_size.
 229         (parse_and_set_memory_size): Change callback->printf_filtered call
 230         to sim_io_printf.
 231         (sim_create_inferior): Delete prog_argv assignment.
 232         (sim_do_command): Change callback->printf_filtered calls to
 233         sim_io_printf.  Pass sd to parse_and_set_memory_size.
 234
 235 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
 236
 237         * Makefile.in (SIM_OBJS): Delete sim-stop.o.
 238
 239 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
 240
 241         * interp.c (sim_close): Delete.
 242
 243 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 244
 245         * configure: Regenerate.
 246
 247 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 248
 249         * configure: Regenerate.
 250
 251 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 252
 253         * configure: Regenerate.
 254
 255 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 256
 257         * sim-main.h (SIM_CPU): Delete.
 258
 259 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 260
 261         * sim-main.h (sim_cia): Delete.
 262
 263 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
 264
 265         * sim-main.h (CIA_GET, CIA_SET): Delete.
 266
 267 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
 268
 269         * interp.c (sh_pc_get, sh_pc_set): New functions.
 270         (sim_open): Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
 271
 272 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
 273
 274         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
 275         * sim-main.h (STATE_CPU): Delete.
 276
 277 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 278
 279         * configure: Regenerate.
 280
 281 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
 282
 283         * Makefile.in (SIM_OBJS): Delete sim-engine.o.
 284
 285 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 286
 287         * config.in, configure: Regenerate.
 288
 289 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 290
 291         * Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS): Delete.
 292         (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
 293         * interp.c: Delete run-sim.h include.  Include sim-main.h, sim-base.h,
 294         and sim-options.h.
 295         (SEXT, SEXT32): Undefine.
 296         (sim_write): Delete prototype.
 297         (regstacktype, saved_state_type): Move to sim-main.h.
 298         (target_little_endian): Replace with CURRENT_TARGET_BYTE_ORDER.
 299         (host_little_endian): Replace with CURRENT_HOST_BYTE_ORDER.
 300         (sim_kind, myname, tracing, sim_stop, sim_trace, sim_set_profile,
 301         sim_set_profile_size, sim_load, sim_set_callbacks,
 302         sim_complete_command): Delete.
 303         (sim_size): Mark static.
 304         (init_pointers): Delete host_little_endian setup.
 305         (sim_resume): Delete tracing check.
 306         (free_state): New cleanup function.
 307         (sim_open): Rewrite to use new common logic.
 308         (sim_create_inferior): Call init_dsp.
 309         * sim-main.h: New file.
 310         * tconfig.h: Delete file.
 311
 312 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 313
 314         * gencode.c (ppi_gensim): Convert old style prototype with ppi_insn.
 315         * interp.c: Include ctype.h and run-sim.h.
 316         [HAVE_TIME_H]: Include time.h
 317         [HAVE_SYS_TIME_H]: Include sys/time.h
 318         [!_WIN32]: Include utime.h and sys/wait.h.
 319         (set_fpscr1, raise_exception, raise_buserror, get_dr, set_dr, set_sr,
 320         do_rdat, do_wdat, process_wlat_addr, process_wwat_addr,
 321         process_wbat_addr, process_rlat_addr, process_rwat_addr,
 322         process_rbat_addr, IOMEM, get_now, now_persec, swapout, swapout16,
 323         ptr, strswaplen, strnswap, dmul, macw, macl, get_loop_bounds_ext,
 324         get_loop_bounds, sim_size, init_dsp, init_pointers, dump_profile,
 325         gotcall, sim_stop, sim_write, sim_read, sim_store_register,
 326         sim_fetch_register, sim_trace, sim_stop_reason, sim_info,
 327         sim_set_profile, sim_set_profile_size, sim_open,
 328         parse_and_set_memory_size, sim_close, sim_load, sim_create_inferior,
 329         sim_do_command, sim_set_callbacks): Convert old style prototype.
 330         (fail): Delete unused function.
 331         (wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
 332         Delete unused prototypes.
 333         (wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast,
 334         swap, swap16):
 335         Convert old style prototype and move INLINE before the type.
 336         (trap): Convert old style prototype.  Add casts to wait and sim_write
 337         calls.
 338         (div1): Convert old style prototype.  Change return to void.
 339         (do_long_move_insn, do_blog_insn, fsca_s, fsrra_s, mcalloc): Mark
 340         static.
 341         (sim_resume): Convert old style prototype.  Align printf format and
 342         args.
 343
 344 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 345
 346         * gencode.c (ppi_gensim): Add missing */.  Change case 4 to case 5.
 347
 348 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 349
 350         * Makefile.in (gencode): Add $(BUILD_CFLAGS), $(BUILD_LDFLAGS),
 351         and $(WARN_CFLAGS).
 352         * gencode.c: Include ctype.h, stdlib.h, string.h, and unistd.h.
 353         (struct op): Mark members const.
 354         (tab): Mark static.
 355         (nibble_type_list): Mark const.
 356         (arg_type_list): Mark const.
 357         (make_enum_list): Delete unused func.
 358         (qfunc, expand_opcode, dumptable, expand_ppi_code): Convert old
 359         style prototype and mark args const.
 360         (sorttab, gengastab, conflict_warn, filltable, expand_ppi_movxy,
 361         gensim, ppi_filltable): Convert old style prototype.
 362         (gensim_caselist): Convert old style prototype.  Mark local
 363         variables s and r const.
 364         (gendefines): Convert old style prototype.  Mark s const.  Move
 365         tolower call into printf statement.
 366         (ppi_gensim): Convert old style prototype.  Mark local variable
 367         s const.
 368         (main): Convert old style prototype.  Change printf %d to %zu.
 369
 370 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 371
 372         * config.in, configure: Regenerate.
 373         * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
 374         SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT,
 375         SIM_AC_OPTION_INLINE, SIM_AC_OPTION_WARNINGS.
 376
 377 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 378
 379         * config.in, configure: Regenerate.
 380         * tconfig.in: Rename file ...
 381         * tconfig.h: ... here.
 382
 383 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 384
 385         * Makefile.in (SIM_EXTRA_CFLAGS): Set to
 386         -DSIM_USE_DEPRECATED_RUN_FRONTEND.
 387         (SIM_RUN_OBJS): Set to run.o.
 388
 389 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 390
 391         * configure.ac (AC_CHECK_HEADERS): Delete.
 392         * aclocal.m4, configure: Regenerate.
 393
 394 2014-10-14  Oleg Endo <olegendo@gcc.gnu.org>  (tiny patch)
 395
 396         * gencode.c (fabs, fneg): Implement as integer operation
 397         instead of using the FP_UNARY macro.
 398
 399 2014-08-19  Alan Modra  <amodra@gmail.com>
 400
 401         * configure: Regenerate.
 402
 403 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 404
 405         * configure: Regenerate.
 406         * config.in: Regenerate.
 407
 408 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 409
 410         * interp.c (parse_and_set_memory_size): Add const to str.
 411         (sim_do_command): Add const to cmd and sms_cmd.
 412
 413 2014-03-05  Mike Frysinger  <vapier@gentoo.org>
 414
 415         * interp.c (sim_load): Add const to prog.
 416
 417 2014-02-17  Mike Frysinger  <vapier@gentoo.org>
 418
 419         PR gdb/16450
 420         * interp.c (control_c): Delete.
 421         (sim_resume): Delete signal(SIGINT) handling.
 422
 423 2013-09-23  Alan Modra  <amodra@gmail.com>
 424
 425         * configure: Regenerate.
 426
 427 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 428
 429         * aclocal.m4, configure: Regenerate.
 430
 431 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 432
 433         * config.in, configure: Regenerate.
 434
 435 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 436
 437         * aclocal.m4, config.in, configure: Regenerate.
 438
 439 2012-02-16  Kevin Buettner  <kevinb@redhat.com>
 440
 441         * interp.c (MA): Adjust cast to avoid warning on 64-bit hosts.
 442
 443         * interp.c (sim_store_register, sim_fetch_register): Return
 444         length, not -1.
 445
 446 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 447
 448         * aclocal.m4: New file.
 449         * configure: Regenerate.
 450
 451 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 452
 453         * configure.ac: Change include to common/acinclude.m4.
 454
 455 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 456
 457         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 458         call.  Replace common.m4 include with SIM_AC_COMMON.
 459         * configure: Regenerate.
 460
 461 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 462
 463         * interp.c (sim_complete_command): New stub function.
 464
 465 2010-04-14  Mike Frysinger  <vapier@gentoo.org>
 466
 467         * interp.c (sim_write): Add const to buffer arg.
 468
 469 2010-01-12  Masaki Muranaka  <monaka@monami-software.com>
 470
 471         * interp.c: Don't include sysdep.h.
 472         Include stdio.h and errno.h.
 473         Include string.h strings.h stdlib.h sys/stat.h if present.
 474
 475 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 476
 477         * configure: Regenerate.
 478
 479 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 480
 481         * config.in: Regenerate.
 482         * configure: Likewise.
 483
 484         * configure: Regenerate.
 485
 486 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 487
 488         * configure: Regenerate to track ../common/common.m4 changes.
 489         * config.in: Ditto.
 490
 491 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 492             Daniel Jacobowitz  <dan@codesourcery.com>
 493             Joseph Myers  <joseph@codesourcery.com>
 494
 495         * configure: Regenerate.
 496
 497 2008-02-04  Antony King  <antony.king@st.com>
 498
 499         * interp.c (macl): Fix non-portable implementation.
 500
 501 2007-10-08  Andrew Stubbs  <andrew.stubbs@st.com>
 502
 503         * gencode.c (tab): Add RAISE_EXCEPTION_IF_IN_DELAY_SLOT to the
 504         definition of PC relative 'mov.l'/'mov.w' and also 'mova'.
 505
 506 2007-03-02  Andrew Stubbs  <andrew.stubbs@st.com>
 507
 508         * gencode.c (tab): Correct pre-decrement instructions when m == n.
 509
 510 2006-12-21  Hans-Peter Nilsson  <hp@axis.com>
 511
 512         * acconfig.h: Remove.
 513         * config.in: Regenerate.
 514
 515 2006-06-13  Richard Earnshaw  <rearnsha@arm.com>
 516
 517         * configure: Regenerated.
 518
 519 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 520
 521         * configure: Regenerated.
 522
 523 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 524
 525         * configure: Regenerated.
 526
 527 2005-11-10  Andrew Stubbs  <andrew.stubbs@st.com>
 528
 529         * interp.c (sim_memory_size): Use same amount of memory on Windows as
 530         elsewhere.
 531
 532 2005-09-19  J"orn Rennecke <joern.rennecke@st.com>
 533
 534         * interp.c (<sys/mman.h>): Include.
 535         (mcalloc): New function / macro.
 536         (mfree): New macro.
 537         (sim_size): Use mcalloc and mfree.
 538
 539 2005-08-02  J"orn Rennecke <joern.rennecke@st.com>
 540
 541         * interp.c (strswaplen): Add one for '\0' delimiter.
 542
 543 2005-06-16  Daniel Jacobowitz  <dan@codesourcery.com>
 544
 545         * gencode.c (tab): Avoid lvalue casts.  Suggested by
 546         Ralf Corsepius <ralf.corsepius@rtems.org>.
 547
 548 2005-04-12  Jonathan Larmour  <jifl@eCosCentric.com>
 549
 550         * gencode.c (tab): Avoid inserting code before variables all declared.
 551
 552 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 553
 554         * configure: Regenerate.
 555
 556 2005-01-14  Andrew Cagney  <cagney@gnu.org>
 557
 558         * configure.ac: Sinclude aclocal.m4 before common.m4.  Add
 559         explicit call to AC_CONFIG_HEADER.
 560         * configure: Regenerate.
 561
 562 2005-01-12  Andrew Cagney  <cagney@gnu.org>
 563
 564         * configure.ac: Update to use ../common/common.m4.
 565         * configure: Re-generate.
 566
 567 2005-01-11  Andrew Cagney  <cagney@localhost.localdomain>
 568
 569         * configure: Regenerated to track ../common/aclocal.m4 changes.
 570
 571 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 572
 573         * configure.ac: Rename configure.in, require autoconf 2.59.
 574         * configure: Re-generate.
 575
 576 2004-12-08  Hans-Peter Nilsson  <hp@axis.com>
 577
 578         * configure: Regenerate for ../common/aclocal.m4 update.
 579
 580 2004-09-08  DJ Delorie  <dj@redhat.com>
 581
 582         Commited by Corinna Vinschen <vinschen@redhat.com>
 583         * gencode.c (movua.l): Compensate for endianness.
 584
 585 2004-09-08  Corinna Vinschen  <vinschen@redhat.com>
 586
 587         * interp.c (RAISE_EXCEPTION_IF_IN_DELAY_SLOT): New macro.
 588         (in_delay_slot): New flag variable.
 589         (Delay_Slot): Set in_delay_slot.
 590         (sim_resume): Reset in_delay_slot after leaving code switch.
 591         * gencode.c (op tab): Call RAISE_EXCEPTION_IF_IN_DELAY_SLOT for all
 592         instructions not allowed in delay slots.
 593
 594 2004-09-08  Michael Snyder  <msnyder@redhat.com>
 595
 596         Commited by Corinna Vinschen <vinschen@redhat.com>
 597         Introduce SH2a support.
 598         * interp.c: Change type of jump table to short.  Add various macros.
 599         (sim_load): Save the bfd machine code.
 600         (sim_create_inferior): Ditto.
 601         (union saved_state_type): Add tbr, ibnr and ibcr registers.
 602         Move bfd_mach to end of struct.  Add regstack pointer.
 603         (init_dsp): Don't swap contents of sh_dsp_table any more.  Instead
 604         use it directly in its own switch statement.  Allocate space for 512
 605         register banks.
 606         (do_long_move_insn): New function.
 607         (do_blog_insn): Ditto.
 608         (trap): Use trap #13 and trap #14 to set ibnr and ibcr.
 609         * gencode.c: Move movx/movy insns into separate switch statement.
 610         (op tab): Add sh2a insns.  Reject instructions that are disabled
 611         on that chip.
 612         (gensim_caselist): Generate default case here instead of in caller.
 613         (gensim): Generate two separate switch statements.  Call
 614         gensim_caselist once for each (for movsxy_tab and for tab).
 615         Add tokens for r15 and multiple regs.
 616         (conflict_warn, warn_conflicts): Add for debugging.
 617
 618 2004-08-18  J"orn Rennecke <joern.rennecke@superh.com>
 619
 620         * gencode.c (tab): For shad snd shld, fix result for
 621         (op1 < 0 && shift_amount == 0).
 622
 623 2004-02-02  Michael Snyder  <msnyder@redhat.com>
 624
 625         * gencode.c (movua.l): Set thislock to 0, not n.
 626
 627 2004-02-12  Michael Snyder  <msnyder@redhat.com>
 628
 629         * gencode.c (table): Change from char to short.
 630         (dumptable): Change generated table from char to short.
 631         * interp.c (sh_jump_table, sh_dsp_table, ppi_table): char to short.
 632         (init_dsp): Compute size of sh_dsp_table.
 633         (sim_resume): Change jump_table from char to short.
 634
 635 2004-01-27  Michael Snyder  <msnyder@redhat.com>
 636
 637         * gencode.c: (op tab): Some refs and defs fixes.
 638         "fsrra" -> "fsrra <FREG_N>".
 639         "sleep": replace array ref with array addr.
 640         "trapa": ditto.
 641         Comment and whitespace clean-ups.
 642
 643 2004-01-07  Michael Snyder  <msnyder@redhat.com>
 644
 645         * gencode.c: Whitespace cleanup.
 646         * interp.c: Ditto.
 647
 648         * gencode.c: Replace 'Hitachi' with 'Renesas'.
 649         (op tab): Add new instructions for sh4a, DBR, SBR.
 650         (expand_opcode): Add handling for new movxy combinations.
 651         (gensym_caselist): Ditto.
 652         (expand_ppi_movxy): Remove movx/movy expansions,
 653         now handled in expand_opcode.
 654         (gensym): Add some helpful macros.
 655         (expand_ppi_code): Flatten loop for simplicity, tweak for 12-bit
 656         instead of 8-bit table (some insns are ambiguous to 8 bits).
 657         (ppi_gensim, main): Generate 12-bit instead of 8-bit ppi table.
 658
 659         * interp.c: Replace 'Hitachi' with 'Renesas'.
 660         (union saved_state_type): Add dbr, sgr, ldst.
 661         (get_loop_bounds_ext): New function.
 662         (init_dsp): Add bfd_mach_sh4al_dsp.
 663         (sim_resume): Handle extended loop bounds.
 664
 665 2003-12-18  Michael Snyder  <msnyder@redhat.com>
 666
 667         * gencode.c (expand_opcode): Simplify and reorganize.
 668         Eliminate "shift" parameter.  Eliminate "4 bits at a time"
 669         assumption.  Flatten switch statement to a single level.
 670         Add "eeee" token for even-numbered registers.
 671         (bton): Delete.
 672         (fsca): Use "eeee" token.
 673         (ppi_moves): Rename to "expand_ppi_movxy".  Do the ddt
 674         [movx/movy] expansion here, as well as the ppi expansion.
 675         (gensim_caselist): Accept 'eeee' along with 'nnnn'.
 676
 677 2003-11-03  J"orn Rennecke <joern.rennecke@superh.com>
 678
 679         * interp.c (fsca_s, fsrra_s): New functions.
 680         * gencode.c (tab): Add entries for fsca and fsrra.
 681         (expand_opcode): Allow variable length n / m fields.
 682
 683 2003-10-15  J"orn Rennecke <joern.rennecke@superh.com>
 684
 685         * syscall.h (SYS_truncate, SYS_ftruncate): Define.
 686         * interp.c (trap): Add support for SYS_ftruncate and SYS_truncate.
 687
 688 2003-08-11  Shrinivas Atre  <shrinivasa@KPITCummins.com>
 689         * sim/sh/gencode.c ( tab[] ): Addition of MAC.L handler and
 690         correction for MAC.W handler
 691         * sim/sh/interp.c ( macl ): New Function. Implementation of
 692         MAC.L handler.
 693
 694 2003-08-07  Michael Snyder  <msnyder@redhat.com>
 695
 696         * gencode.c (expand_ppi_code): Comment spelling fix.
 697
 698 2003-07-25  Michael Snyder  <msnyder@redhat.com>
 699
 700         * gencode.c (pshl): Change < to <= (shift by 16 is allowed).
 701         Cast argument of >> to unsigned to prevent sign extension.
 702         (psha): Change < to <= (shift by 32 is allowed).
 703
 704 2003-07-24  Michael Snyder  <msnyder@redhat.com>
 705
 706         * gencode.c: Fix typo in comment.
 707
 708 2003-07-23  Michael Snyder  <msnyder@redhat.com>
 709
 710         * gencode.c: A few more fix-ups of refs and defs.
 711         (frchg): Raise SIGILL if in double-precision mode.
 712         (ldtlb): We don't simulate cache, so this is a no-op.
 713         (movsxy_tab): Correct a few bit pattern errors.
 714
 715 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 716
 717         * gencode.c (prnd): Clear LSW of result to zeros.
 718         * gencode.c (pmuls): Expression is mis-parenthesized.
 719         * gencode.c (ppi_gensim): For a conditional ppi insn, if the
 720         condition is false, we want to return (not break).  A break
 721         will take us to the end of the function where registers will
 722         be updated, whereas the desired outcome is for nothing to change.
 723
 724 2003-07-03  Michael Snyder  <msnyder@redhat.com>
 725
 726         * gencode.c (movs): Fix a couple of text transpositions.
 727
 728 2003-06-27  Michael Snyder  <msnyder@redhat.com>
 729
 730         * gencode.c (op tab): Some fix-ups of refs and defs.
 731         (ocbi, ocbp): Cache not simulated, but may cause memory fault.
 732         (gensym_caselist): Add default case to switch statement.
 733         (expand_ppi_code): Add default case to switch statement.
 734         * gencode.c (op tab): Implement movca.l.
 735         * gencode.c (op movsxy_tab): Fix an error in the bit pattern.
 736         * gencode.c (gensim_caselist): The movy instructions use
 737         registers R6 and R7 (not R4 and R5 like the movx insns).
 738
 739 2003-06-27  Michael Snyder  <msnyder@redhat.com>
 740
 741         * gencode.c (op movsxy_tab): Fix up some copy/paste errors
 742         in name: s/REG_x/REG_y/.
 743
 744         * gencode.c (op tab): Move misplaced semicolon.
 745
 746 2003-02-27  Andrew Cagney  <cagney@redhat.com>
 747
 748         * interp.c (init_dsp, sim_open, sim_create_inferior): Rename _bfd
 749         to bfd.
 750
 751 Fri Oct 11 16:22:28 2002  J"orn Rennecke <joern.rennecke@superh.com>
 752
 753         * interp.c (trap): Return int.  Take extra parameter for address
 754         of the trap instruction.  Changed all callers.
 755         Add case 33 for profiling.
 756         * gencode.c (trapa): Handle trap 33 using the trap function.
 757         Add read of vector for generic traps.
 758
 759 Wed Jul 17 19:36:38 2002  J"orn Rennecke <joern.rennecke@superh.com>
 760
 761         * Makefile.in (interp.o): Depend on $(srcroot)/include/gdb/sim-sh.h.
 762         * interp.c: Include "gdb/sim-sh.h".
 763         (sim_store_register, sim_fetch_register): Use constants defined there.
 764
 765 Tue Jun 18 16:53:11 2002  J"orn Rennecke <joern.rennecke@superh.com>
 766
 767         * interp.c (sim_resume): Fix setting of bus error for
 768         instruction fetch.
 769
 770 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 771
 772         * configure: Regenerated to track ../common/aclocal.m4 changes.
 773
 774 2002-06-08  Andrew Cagney  <cagney@redhat.com>
 775
 776         * interp.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
 777
 778 2001-01-30  Ben Elliston  <bje@redhat.com>
 779
 780         * interp.c (sim_create_inferior): Record program arguments for
 781         later inspection by the trap handler.
 782         (count_argc): New function.
 783         (prog_argv): Declare static.
 784         (sim_write): Declare.
 785         (trap): Implement argc, argnlen and argn system calls. Do not
 786         abort on unknown system calls--simply return -1.
 787         * syscall.h (SYS_argc, SYS_argnlen, SYS_argn): Define.
 788
 789 2001-01-24  Alexandre Oliva  <aoliva@redhat.com>
 790
 791         * interp.c (trap): Implement time.
 792
 793 2000-10-24  Ben Elliston  <bje@redhat.com>
 794
 795         * gencode.c (tab): Delimit strings with commas where applicable.
 796
 797 Tue May 23 21:39:23 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 798
 799         * configure: Regenerated to track ../common/aclocal.m4 changes.
 800
 801 Mon May 15 22:04:51 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
 802
 803 sh-dsp support, simulator speedup by using host byte order:
 804
 805         * Makefile.in (interp.o): Depends on ppi.c .
 806         (ppi.c): New rule.
 807         * gencode.c (printonmatch, think, genopc): Deleted.
 808         (MAX_NR_STUFF): Now 42.
 809         (tab): Add SH-DSP CPU instructions.
 810         Amalgamate ldc / stc / lds / sts instructions with similar
 811         bit patterns.  Fix opcodes of stc Rm_BANK,@-<REG_N>.
 812         Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
 813         (movsxy_tab): New array.
 814         For movs, change MMMM field to GGGG, and mmmm field to MMMM.
 815         Added entries for movx, movy and parallel processing insns.
 816         (ppi_tab): New array.
 817         (qfunc): Stabilize sort.
 818         (expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
 819         Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
 820         (dumptable): Now takes three arguments.  Changed all callers.
 821         Emit just one contigous jump table.
 822         (filltable): Now takes an argument.  Changed all callers.
 823         Make index static.
 824         (ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
 825         (gensim_caselist): New function, broken out of gensim.
 826         Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
 827         Handle ref '9'.
 828         (gensim): Handle 'N' in code field and '8' in refs field.
 829         Call gensim_caselist - twice.
 830         (ppi_index): New static variable.
 831         (main): Unsupport default action.
 832         Add dsp support for -x / -s option.  Add -p option.
 833         * interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
 834         (saved_state_type): Rearrange to allow amalgamated ldc / stc /
 835         lds / sts to work efficiently.
 836         (target_dsp): New static variable.
 837         (GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
 838         (FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
 839         (SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
 840         (RS, RE, MOD, MOD_ME, DSP_R): Likewise.
 841         (set_fpscr1): Likewise.  Use target_dsp to check for dsp.
 842         (MOD_MSi, SIG_BUS_FETCH): Deleted.
 843         (CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
 844         (SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
 845         (SET_MOD): Reflect saved_state_type change.  Set MOD_DELTA instead
 846         of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
 847         (set_sr): Reflect saved_state_type change.  Fix SR_RB handling.
 848         Use SET_MOD.
 849         (MA, L, TL, TB): Now controlled by ACE_FAST.
 850         (SEXT32): Just cast to int.
 851         (SIGN32): Fixed to only shift by 31.
 852         (CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
 853         (ppi_insn): Declare.
 854         (ppi.c): Include.
 855         (init_dsp): Set target_dsp.  When it changes, switch end of
 856         sh_jump_table with sh_dsp_table.
 857         (sim_resume) Don't declare sh_jump_table0.  Use sh_jump_table instead.
 858         Don't Declare PR if it's #defined.
 859         Fix single-stepping (Was broken in Mar  6 16:59:10 patch).
 860         (sim_store_register, sim_read_register): Translate accesses to
 861         reflect saved_state_type change.
 862
 863         * interp.c (set_sr): Set sr.
 864         (SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
 865         (set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
 866         (DSP_R): Fix definition.
 867         (sim_resume): Remove outdated SET_SR use.
 868
 869         * interp.c (saved_state): New members for struct member asregs:
 870         rs, re, insn_end, xram_start, yram_start.
 871         (struct loop_bounds): New struct.
 872         (SKIP_INSN): New macro.
 873         (get_loop_bounds): New function.
 874         (endianw): Renamed to global_endianw.
 875         (maskw): negated bits.
 876         (PC): Now insn_ptr.
 877         (SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
 878         (RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
 879         (M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
 880         (SIG_BUS_FETCH): Likewise
 881         (raise_exception, riat_fast): New functions.
 882         (raise_buserror, sim_stop): Use raise_exception.
 883         (PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
 884         (BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
 885         Reverse sense of mask argument.
 886         (FP_OP, set_dr): Use RAISE_EXCEPTION.
 887         (wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
 888         Declare.  Remove redundant masking.
 889         (wwat_fast, rwat_fast): Add argument endianw.  Changed callers.
 890         (MA): Updated for change pc -> PC.
 891         (Delay_Slot): Use RIAT.
 892         (empty): Deleted.
 893         (trap): Remove argument little_endian.  Add argument endianw.
 894         Changed all callers.  Use raise_exception.
 895         (macw): Add argument endainw.  Changed all callers.
 896         (init_dsp): New function, extended after broken out of init_pointers.
 897         (sim_resume): Replace pc with insn_ptr.  Replace little_endian with
 898         endianw.  Replace nia with nip.  Reverse sense of maskb / maskw /
 899         maskl.  Implement logic for zero-overhead loops.  Don't try to
 900         interpret garbage when getting a SIGBUS at insn fetch.
 901         (sim_open): Call init_dsp.
 902         * gencode.c (tab): Use SET_NIP instead of nia = .  Use PH2T / PT2H /
 903         RAISE_EXCEPTION where appropriate.
 904         Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
 905
 906         * interp.c (sim_store_register, sim_fetch_register):
 907         Do proper endianness switch.
 908
 909         * interp.c (saved_state_type): New members for struct member asregs:
 910         xymem_select, xmem, ymem, xmem_offset, ymem_offset.
 911         (special_address): Delete.
 912         (BUSERROR): Now a two-argument predicate.
 913         (PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
 914         (wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
 915         (process_wlat_addr, process_wwat_addr): New functions.
 916         (process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
 917         (process_rbat_addr): Likewise.
 918         (wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
 919         (rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
 920         (rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
 921         (RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
 922         (do_rdat, trap): Delete SLOW code.
 923         (SEXT32, SIGN32): New macros.
 924         (swap, swap16): Now integer in - integer out.  Changed all callers.
 925         (strswaplen, strnswap): Delete SLOW versions.
 926         (init_pointers): Initialize dsp memory selection (preliminary).
 927         (sim_store_register, sim_fetch_register): Use swap instead of
 928         big / little endian read / write functions.
 929
 930         * interp.c (maskl): Deleted.
 931         (endianw, endianb): New variables.
 932         (special_address): Now inline.
 933         (bp_holder): Put raising of buserror there, rename to:
 934         (raise_buserror).
 935         (BUSERROR): Now yields a value.  Changed all users.
 936         (wbat_big): Delete.
 937         (wlat_fast, wwat_fast, wbat_fast): New functions.
 938         (rlat_fast, rwat_fast, rbat_fast): Likewise.
 939         (RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
 940         (do_rdat, do_wdat): Likewise.  Take maskl argument instead of
 941         little_endian one.  Changed caller macros.
 942         (swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
 943         (strswaplen, strnswap): New functions.
 944         (trap): Use them to fix up endian mismatches;
 945         disable SYS_execve and SYS_execv; fix double address translation for
 946         SYS_pipe and SYS_stat.
 947         (sym_write, sym_read): Add endianness translation.
 948         (sym_store_register, sym_fetch_register): Add maskl local variable.
 949         (sim_open): Set endianw and endianb.
 950
 951 Thu Sep  2 18:15:53 1999  Andrew Cagney  <cagney@b1.cygnus.com>
 952
 953         * configure: Regenerated to track ../common/aclocal.m4 changes.
 954
 955 Wed Aug 25 07:55:23 1999  Brendan Kehoe  <brendan@cygnus.com>
 956
 957         * gencode.c (fcnvds <DR_N>,FPUL): Rewrite to use a local anonymous
 958         union type, instead of casting to an int* then a float*.
 959         (fcnvsd FPUL,<DR_N>): Likewise.
 960         (flds <FREG_N>,FPUL): Likewise.
 961         (fsts FPUL,<FREG_N>): Likewise.
 962
 963 1999-05-08  Felix Lee  <flee@cygnus.com>
 964
 965         * configure: Regenerated to track ../common/aclocal.m4 changes.
 966
 967 1999-04-02  Keith Seitz  <keiths@cygnus.com>
 968
 969         * interp.c (POLL_QUIT_INTERVAL): Define. Used to tweak the
 970         frequency at which the poll_quit callback is called.
 971         (sim_resume): Use POLL_QUIT_INTERVAL instead of a
 972         hard-coded value.
 973
 974 Thu Sep 10 02:16:39 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 975
 976         * interp.c (saved_state.asregs): Add new member pad_dummy.
 977         (sim_store_register, sim_fetch_regsiter): Add 1 to rn for use
 978         as index into saved_state.asints.
 979
 980 Mon Jun 29 19:35:24 1998  Jason Molenda  (crash@bugshack.cygnus.com)
 981
 982         * interp.c (sim_open): set endianness based on the ABFD if a -E
 983         option is not present and we have an ABFD.
 984
 985 Tue Apr 28 18:33:31 1998  Geoffrey Noer  <noer@cygnus.com>
 986
 987         * configure: Regenerated to track ../common/aclocal.m4 changes.
 988
 989 Sun Apr 26 15:31:55 1998  Tom Tromey  <tromey@creche>
 990
 991         * configure: Regenerated to track ../common/aclocal.m4 changes.
 992         * config.in: Ditto.
 993
 994 Sun Apr 26 15:19:48 1998  Tom Tromey  <tromey@cygnus.com>
 995
 996         * acconfig.h: New file.
 997         * configure.in: Reverted change of Apr 24; use sinclude again.
 998
 999 Fri Apr 24 14:16:40 1998  Tom Tromey  <tromey@creche>
1000
1001         * configure: Regenerated to track ../common/aclocal.m4 changes.
1002         * config.in: Ditto.
1003
1004 Fri Apr 24 11:18:35 1998  Tom Tromey  <tromey@cygnus.com>
1005
1006         * configure.in: Don't call sinclude.
1007
1008 Sat Apr  4 20:36:25 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1009
1010         * configure: Regenerated to track ../common/aclocal.m4 changes.
1011
1012 Fri Mar 27 16:15:52 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1013
1014         * configure: Regenerated to track ../common/aclocal.m4 changes.
1015
1016 Wed Mar 25 12:35:29 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1017
1018         * configure: Regenerated to track ../common/aclocal.m4 changes.
1019
1020 Wed Mar 18 12:38:12 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1021
1022         * configure: Regenerated to track ../common/aclocal.m4 changes.
1023
1024 Tue Feb 17 12:49:44 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1025
1026         * interp.c (sim_fetch_register, sim_store_register): Pass in
1027         length parameter.  Return -1.
1028
1029 Sun Feb  1 16:47:51 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1030
1031         * configure: Regenerated to track ../common/aclocal.m4 changes.
1032
1033 Sat Jan 31 18:15:41 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1034
1035         * configure: Regenerated to track ../common/aclocal.m4 changes.
1036
1037 Mon Jan 19 22:26:29 1998  Doug Evans  <devans@seba>
1038
1039         * configure: Regenerated to track ../common/aclocal.m4 changes.
1040
1041 Mon Dec 15 23:17:11 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1042
1043         * configure: Regenerated to track ../common/aclocal.m4 changes.
1044         * config.in: Ditto.
1045
1046 Thu Dec  4 09:21:05 1997  Doug Evans  <devans@canuck.cygnus.com>
1047
1048         * configure: Regenerated to track ../common/aclocal.m4 changes.
1049
1050 Wed Oct 22 14:43:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1051
1052         * interp.c (sim_load): Pass lma_p and sim_write args to
1053         sim_load_file.
1054
1055 Fri Oct  3 09:28:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1056
1057         * configure: Regenerated to track ../common/aclocal.m4 changes.
1058
1059 Wed Sep 24 17:38:57 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1060
1061         * configure: Regenerated to track ../common/aclocal.m4 changes.
1062
1063 Tue Sep 23 11:04:38 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1064
1065         * configure: Regenerated to track ../common/aclocal.m4 changes.
1066
1067 Mon Sep 22 11:46:20 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1068
1069         * configure: Regenerated to track ../common/aclocal.m4 changes.
1070
1071 Fri Sep 19 17:45:25 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1072
1073         * configure: Regenerated to track ../common/aclocal.m4 changes.
1074
1075 Mon Sep 15 17:36:15 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1076
1077         * configure: Regenerated to track ../common/aclocal.m4 changes.
1078
1079 Tue Sep  9 20:52:21 1997  Felix Lee  <flee@cygnus.com>
1080
1081         * interp.c (sim_resume): poll_quit() at least once per call;
1082         otherwise gdb can loop sim_resume() uninterruptably.
1083
1084 Thu Sep  4 17:21:23 1997  Doug Evans  <dje@seba>
1085
1086         * configure: Regenerated to track ../common/aclocal.m4 changes.
1087
1088 Tue Sep  2 13:15:27 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1089
1090         * gencode.c (tab): Order instructions according to SH3 document.
1091
1092 Wed Aug 27 18:13:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1093
1094         * configure: Regenerated to track ../common/aclocal.m4 changes.
1095         * config.in: Ditto.
1096
1097 Tue Aug 26 10:41:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1098
1099         * interp.c (sim_kill): Delete.
1100         (sim_create_inferior): Add ABFD argument.
1101         (sim_load): Move setting of PC from here.
1102         (sim_create_inferior): To here.
1103
1104 Mon Aug 25 17:50:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1105
1106         * configure: Regenerated to track ../common/aclocal.m4 changes.
1107         * config.in: Ditto.
1108
1109 Mon Aug 25 16:17:51 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1110
1111         * interp.c (sim_open): Add ABFD argument.
1112
1113 Mon Jun 23 15:49:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1114
1115         * interp.c (get_dr): Avoid SIGFPE by moving integers instead of
1116         FP's around.
1117         (set_dr): Ditto.
1118
1119 Mon Jun 23 15:02:40 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1120
1121         * interp.c (XD, SET_XD): Delete.
1122         (XF, SET_XF, XD_TO_XF): Define, move around registers in either
1123         FP bank.
1124
1125         * gencode.c (fmov): Update.
1126
1127 Sun Jun 22 19:33:33 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1128
1129         * interp.c (set_fpscr1): From J"orn Rennecke
1130         <amylaar@cygnus.co.uk>, Fix typo. Ditto for comment.
1131
1132 Tue Aug 12 00:19:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1133
1134         * interp.c (special_address): New function.
1135         (BUSERROR): Call it.  Added parameters bits_written and data.
1136         Changed all callers.
1137         * gencode.c (tab): Fixed ocbwb and pref.
1138
1139 Fri Jun 20 22:03:18 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1140
1141         * interp.c (do_wdat, do_wdat): Fix bug in register number calculation.
1142
1143 Thu Jun 19 00:28:08 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1144
1145         * interp.c (sim_create_inferior): Clear registers each time an
1146         inferior is started.
1147
1148 Mon Jun 16 14:01:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1149
1150         * interp.c (*FP, FP_OP, FP_CMP, FP_UNARY): Provide a hook for
1151         when a host doesn't support IEEE FP.
1152         (*DP): Provide alternative definition that supports 64bit floating
1153         point.
1154         (target_little_endian): Combine little_endian and little_endian_p.
1155         (saved_state_type): Make fpscr and sr simple integers.
1156         (SET_FPSCR, GET_FPSCR): Use macros to update fpscr register.
1157         (set_fpscr1): New function.  Handle swapping when PR / FR bits
1158         changed. Call via *_FPSCR macro.
1159         (SET_SR*, GET_SR*): Use macro's to access the SR bits - avoids
1160         endian problems.
1161
1162         * gencode.c (tab): Update.
1163
1164 Sun Jun 15 15:22:52 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1165
1166         * gencode.c (main): Perform basic checks on tab entries.
1167
1168         * Makefile.in (gencode): Always compile with -g.
1169
1170 Sat Jun 14 13:45:09 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1171
1172         * gencode.c (gensim): Move ref checking code to before `stuff'.
1173         For branches with delay slots refs were not being checked.
1174
1175         * interp.c (sim_resume): Use nia to specify the next instruction
1176         address instead of overloading pc.
1177         (C): Delete definiton - refer to cycles directly.
1178         (SEXT12): New macro - sign extend a 12 bit quantity.
1179         (Delay_Slot): Rename from SL.
1180
1181         * gencode.c (tab): Update/simplify.
1182
1183         * gencode.c (gensim): Better formatting of output code.
1184         (gensim): Replace 10 with constant MAX_NR_STUFF- define as 15.
1185         (tab): Sort alphabetically.  Break `stuff' into multiple lines.
1186
1187 Fri Jun 13 22:10:13 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1188
1189         * gencode.c (braf, bsrf): Fix branch destination calculation to
1190         be in accordance with the documentation.
1191
1192 Fri Jun 13 15:33:53 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1193
1194         * interp.c (init_pointers): Fix little endian test.
1195
1196 Thu Jun  5 12:56:08 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1197
1198         * interp.c (init_pointers): SH4 hardware is always WORDS_BIT_ENDIAN.
1199         * gencode (fmov from/to memory): take endian_mismatch into account
1200         for 32 bit moves too.
1201
1202 Wed May 28 23:42:35 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1203
1204         * gencode.c (swap.b): Fix treatment of high word.
1205
1206 Wed May 28 23:42:35 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1207
1208         * sh/gencode.c,
1209         * interp.c: experimental SH4 support.
1210         DFmode moves are probaly broken for target little endian.
1211
1212 Tue May 20 10:23:28 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1213
1214         * interp.c (sim_open): Add callback argument.
1215         (sim_set_callbacks): Delete SIM_DESC argument.
1216
1217 Wed Apr 30 11:38:08 1997  Doug Evans  <dje@canuck.cygnus.com>
1218
1219         * Makefile.in (SIM_EXTRA_CLEAN): Define.
1220         (clean targets): Delete.
1221         (sh-clean): New target.
1222
1223 Thu Apr 24 00:39:51 1997  Doug Evans  <dje@canuck.cygnus.com>
1224
1225         * configure: Regenerated to track ../common/aclocal.m4 changes.
1226
1227 Wed Apr 23 17:55:22 1997  Doug Evans  <dje@canuck.cygnus.com>
1228
1229         * tconfig.in: New file.
1230         * interp.c (sim_open): Handle missing arg to -E.
1231
1232 Tue Apr 22 08:55:35 1997  Stu Grossman  (grossman@critters.cygnus.com)
1233
1234         * Makefile.in:  Add clean targets.
1235
1236 Fri Apr 18 18:57:04 1997  Stu Grossman  (grossman@critters.cygnus.com)
1237
1238         * interp.c:  Include float.h and define SIGTRAP if _WIN32.
1239         WIN32 -> _WIN32.
1240         * (trap):  Do do SYS_chown for _WIN32.
1241
1242 Fri Apr 18 13:33:09 1997  Doug Evans  <dje@canuck.cygnus.com>
1243
1244         * interp.c (sim_resume): Fix argument to poll_quit.
1245
1246 Fri Apr 18 14:14:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1247
1248         * interp.c (sim_stop): New function.
1249         (sim_resume): Use poll_quit for polling.
1250
1251 Thu Apr 17 03:32:04 1997  Doug Evans  <dje@canuck.cygnus.com>
1252
1253         * Makefile.in (SIM_OBJS): Add sim-load.o.
1254         * interp.c (target_byte_order): Delete.
1255         (sim_kind, myname, little_endian_p): New static locals.
1256         (init_pointers): Use little_endian_p instead of target_byte_order.
1257         (sim_resume): Likewise.
1258         (sim_open): Set sim_kind, myname.  Set little_endian_p from -E arg.
1259         (sim_load): Return SIM_RC.  New arg abfd.  Call sim_load_file to
1260         load file into simulator.  Set start address from bfd.
1261         (sim_create_inferior): Return SIM_RC.  Delete arg start_address.
1262
1263 Mon Apr  7 15:45:02 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1264
1265         * configure: Regenerated to track ../common/aclocal.m4 changes.
1266         * config.in: Ditto.
1267
1268 Wed Apr  2 15:06:28 1997  Doug Evans  <dje@canuck.cygnus.com>
1269
1270         * interp.c (sim_open): New arg `kind'.
1271
1272         * configure: Regenerated to track ../common/aclocal.m4 changes.
1273
1274 Wed Apr  2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1275
1276         * configure: Regenerated to track ../common/aclocal.m4 changes.
1277
1278 Wed Mar 19 09:34:36 1997  Fred Fish  <fnf@cygnus.com>
1279
1280         * interp.c (sim_do_command): Check for NULL command or empty
1281         string and handle it the same as a "help" command.  Use callback
1282         to print error message for unrecognized commands.  Replace
1283         hardcoded tab in literal string with a \t.  Other minor code
1284         cleanup.
1285
1286 Wed Mar 19 01:14:00 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1287
1288         * configure: Regenerated to track ../common/aclocal.m4 changes.
1289
1290 Mon Mar 17 15:10:07 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1291
1292         * configure: Re-generate.
1293
1294 Fri Mar 14 10:34:11 1997  Michael Meissner  <meissner@cygnus.com>
1295
1296         * configure: Regenerate to track ../common/aclocal.m4 changes.
1297
1298 Thu Mar 13 13:00:00 1997  Doug Evans  <dje@canuck.cygnus.com>
1299
1300         * interp.c (sim_open): New SIM_DESC result.  Argument is now
1301         in argv form.
1302         (other sim_*): New SIM_DESC argument.
1303
1304 Tue Feb  4 13:33:30 1997  Doug Evans  <dje@canuck.cygnus.com>
1305
1306         * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1307         COMMON_{PRE,POST}_CONFIG_FRAG instead.
1308         * configure.in: sinclude ../common/aclocal.m4.
1309         * configure: Regenerated.
1310
1311 Thu Jan 23 11:46:23 1997  Stu Grossman  (grossman@critters.cygnus.com)
1312
1313         * configure configure.in Makefile.in:  Update to new configure
1314         scheme which is more compatible with WinGDB builds.
1315         * configure.in:  Improve comment on how to run autoconf.
1316         * configure:  Re-run autoconf to get new ../common/aclocal.m4.
1317         * Makefile.in:  Use autoconf substitution to install common
1318         makefile fragment.
1319
1320 Wed Nov 20 02:04:32 1996  Doug Evans  <dje@canuck.cygnus.com>
1321
1322         * Makefile.in: Delete stuff moved to ../common/Make-common.in.
1323         (SIM_OBJS,SIM_EXTRA_LIBS): Define.
1324         * configure.in: Simplify using macros in ../common/aclocal.m4.
1325         Call AC_CHECK_HEADERS(unistd.h).
1326         * configure: Regenerated.
1327         * config.in: New file.
1328         * interp.c: #include "config.h".  #include <unistd.h> if present.
1329         (trap): Fetch errno value with callback->get_errno.
1330
1331 Tue Nov 12 13:34:00 1996  Dawn Perchik  <dawn@cygnus.com>
1332
1333         * interp.c: Don't include windows polling code if inside simluator.
1334
1335 Fri Sep 20 14:57:50 1996  Stan Shebs  <shebs@andros.cygnus.com>
1336
1337         * interp.c: Minor formatting improvements.
1338         (saved_state_type): Add bank registers.
1339         (bp_holder): New function, use to break on when debugging BUSERROR.
1340         (BUSERROR): Call it if bus error occurs.
1341
1342 Wed Jun 26 12:29:22 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1343
1344         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1345         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1346         (docdir): Removed.
1347         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1348         (AC_PROG_INSTALL): Added.
1349         * configure: Rebuilt.
1350
1351 Thu May 16 15:44:29 1996  Ian Lance Taylor  <ian@cygnus.com>
1352
1353         * interp.c (saved_state_type): Add memstalls field.
1354         (MA) Define macro.
1355         (sim_resume): New local variable memstalls.  Add it back in to
1356         saved_state at the end of the function.
1357         (sim_info): Report memstalls.
1358         * gencode.c (tab): Add MA() to the execution string of all
1359         instructions which access memory.
1360
1361 Wed Feb 21 12:16:41 1996  Ian Lance Taylor  <ian@cygnus.com>
1362
1363         * configure: Regenerate with autoconf 2.7.
1364
1365 Tue Dec  5 16:38:55 1995  Stu Grossman  (grossman@cygnus.com)
1366
1367         * gencode.c (mac.l):  Don't abort GDB if executing mac.l
1368         instruction (which is unimplemented).  Generate a SIGTRAP (in the
1369         simulated target) instead.
1370
1371 Mon Dec  4 12:22:24 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1372
1373         * gencode.c (tab): Added several sh3 opcodes.
1374         (think): Added printonmatch for A_SSR and A_SPC.
1375         * interp.c (SSR, SPC): Added definitions.
1376         (saved_state_type): Added ssr and spc registers.
1377
1378 Wed Nov 29 12:39:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1379
1380         * gencode.c (tab): In shad/shld definitions, negate R[m] before
1381         the and operation instead of after.  For shad delete cast.  For shld
1382         use UR instead of R and delete cast.
1383
1384 Fri Nov 17 12:48:55 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1385
1386         * gencode.c (tab): Add explicit NaN support for ftrc instruction.
1387
1388 Wed Nov 15 11:25:27 1995  Stu Grossman  (grossman@cygnus.com)
1389
1390         * interp.c:  Make target_byte_order be extern to prevent SGI cc from
1391         issuing warnings about the use of common symbols.
1392
1393 Tue Nov 14 15:19:43 1995  Stu Grossman  (grossman@cygnus.com)
1394
1395         * gencode.c:  jsr, bsr and bsrf actually save pc+4 in pr, and rts
1396         actually uses pr+0.
1397
1398 Sat Oct 21 13:01:18 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1399
1400         * sh/interp.c (sim_stop_reason): Catch SIGQUIT and indicate
1401         program exited.
1402         (sim_get_quit_code): Delete.
1403
1404         * gencode.c (gensim): Indicate SIGILL instead of calling abort for
1405         default case.
1406
1407 Mon Oct 16 18:24:03 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1408
1409         * interp.c (saved_state_type): Move FP registers to immediately
1410         after SR.
1411
1412 Tue Oct 10 11:12:15 1995  Fred Fish  <fnf@cygnus.com>
1413
1414         * Makefile.in (BISON): Remove macro.
1415
1416 Fri Oct  6 12:08:18 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1417
1418         * interp.c (trap, case SYS_utime): Cast second arg of utime to
1419         void * to avoid compiler error.
1420
1421         * interp.c (callback): Remove last change.  It is initialized by
1422         a sim_set_callbacks call.
1423
1424 Thu Oct  5 14:13:29 1995  steve chamberlain  <sac@slash.cygnus.com>
1425
1426         * interp.c (callback): Initialize to default callback.
1427
1428 Thu Sep 28 15:26:59 1995  steve chamberlain  <sac@slash.cygnus.com>
1429
1430         * run.c: Moved to ../common.
1431         * interp.c (trap): Use gdb's callback interface.
1432         * Makefile.in: Updated.
1433
1434 Wed Sep 20 13:35:13 1995  Ian Lance Taylor  <ian@cygnus.com>
1435
1436         * Makefile.in (maintainer-clean): New synonym for realclean.
1437
1438 Wed Sep 20 09:51:50 1995  steve chamberlain  <sac@slash.cygnus.com>
1439
1440         * run.c (sim_callback_write_stdout):  New.
1441         * interp.c (trap): Call sim_callback_write_stdout when needed.
1442
1443 Mon Sep 18 18:42:27 1995  steve chamberlain  <sac@slash.cygnus.com>
1444
1445         * interp.c (trap): Remove useless code.
1446
1447 Fri Sep 15 19:30:05 1995  steve chamberlain  <sac@slash.cygnus.com>
1448
1449         * syscall.h: Copy from newlib.
1450
1451 Thu Sep 14 19:32:59 1995  Stu Grossman  (grossman@cygnus.com)
1452
1453         * gencode.c:  Back up PC by 2 for breakpoints.
1454         * interp.c:  Move fp regs beyond pc/pr/etc to avoid confusing GDB,
1455         which expect pc to immediately follow regs[].
1456
1457 Fri Sep  8 14:18:13 1995  Ian Lance Taylor  <ian@cygnus.com>
1458
1459         * configure.in: Define CC_FOR_BUILD.  Don't call AC_PROG_INSTALL.
1460         * configure: Rebuild.
1461         * Makefile.in (INSTALL): Revert to using install.sh.
1462         (INSTALL_PROGRAM, INSTALL_DATA): Set to $(INSTALL).
1463         (INSTALL_XFORM, INSTALL_XFORM1): Restore.
1464         (CC_FOR_BUILD): Restore.
1465         (gencode): Build using $(CC_FOR_BUILD).
1466         (install): Don't install in $(tooldir).
1467
1468 Thu Sep  7 15:02:31 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1469
1470         (Try to) Update to new bfd autoconf scheme.
1471         * run.c: Don't include sysdep.h.
1472         * Makefile.in (INSTALL{,_PROGRAM,_DATA}): Use autoconf computed value.
1473         (CC, CFLAGS, AR, RANLIB): Likewise.
1474         (HDEFINES, TDEFINES): Define.
1475         (CC_FOR_BUILD): Delete.
1476         (host_makefile_frag): Delete.
1477         (Makefile): Don't depend on frags.
1478         * configure.in (sysdep.h): Don't create symlink.
1479         (host_makefile_frag, frags): Deleted.
1480         (CC, CFLAGS, AR, RANLIB, INSTALL): Compute values.
1481         * configure: Regenerated.
1482
1483 Thu Aug 31 12:39:07 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1484
1485         * interp.c: Include <math.h>.
1486
1487 Wed Aug 30 22:05:17 1995  Jeff Law  (law@snake.cs.utah.edu)
1488
1489         * Makefile.in (run): Link in math library too.
1490         * gencode.c (gensim): abort if an unknown opcode is encountered.
1491         * interp.c (FPSCR, FPUL): Define.
1492         (struct save_state): Add fields for floating point registers,
1493         FPSCR and FPUL.
1494         (sim_resume): Add 'F' for accessing floating point registers
1495         in the save state structure.
1496         * gencode.c: Add sh3e opcodes.
1497         (gensym): Define a buffer for int<->fp conversions.
1498
1499 Tue Aug 22 14:16:46 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1500
1501         * interp.c (trap): Use trap vector 34 for host system interface.
1502         * gencode.c: Add 34 to conditional which determines which traps
1503         will be handled by simulator.
1504
1505 Fri Aug 11 17:59:15 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1506
1507         * run.c: Include <signal.h>.  Define SIGQUIT if not defined.
1508         (main): New variables reason and sigrc.  After simulator exits,
1509         check to see if it exited because of a signal, and if so, then
1510         use the signal number as the return value.
1511
1512 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1513
1514         * Update all FSF addresses except those in COPYING* files.
1515
1516 Tue Jul 18 23:33:10 1995  Fred Fish  <fnf@fishbowl>
1517
1518         * interp.c (trap): Only use SYS_execv if defined.  Might be
1519         implemented as execve(arg1,arg2,0), as with Unixware 2.0.
1520         (sim_resume): In sbit initializer, cast shifted arg to unsigned
1521         to avoid signed integer overflow.
1522
1523 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1524
1525         * Makefile.in (clean): Remove run, libsim.a.
1526           (distclean, mostlyclean, realclean): Remove Makefile and
1527           autoconf files.
1528
1529         * sh.mt: Removed.
1530
1531         * Makefile.in, configure.in: converted to autoconf.
1532         * configure: New file, generated with autconf 2.4.
1533
1534 Fri Jun 30 16:51:38 1995  Stan Shebs  <shebs@andros.cygnus.com>
1535
1536         * interp.c (sim_open): If argument supplied, interpret as
1537         desired memory size.
1538         (parse_and_set_memory_size): New function.
1539         (sim_do_command): New function.
1540
1541 Thu Jun 29 10:02:28 1995  Fred Fish  <fnf@deneb.cygnus.com>
1542
1543         * interp.c  (SYS_wait): Define as SYS_wait4 if available and
1544         SYS_wait is not already defined (SunOS 4.1.3 for example).
1545         (SYS_utime): Define as SYS_utimes if available and
1546         SYS_utime is not already defined.
1547
1548 Thu Jun 22 17:25:57 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1549
1550         * interp.c: Don't include sys/times.h or sys/param.h
1551
1552 Wed Jun 21 15:03:49 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1553
1554         * interp.c (SIGBUS, SIGTERM): Define if not.
1555         (sim_memory_size): default to 2^19 on PCs.
1556         (sim_resume): Poll for quits on win32.
1557
1558 Wed May 24 16:22:48 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1559
1560         * gencode.c (op_tab): Add SH3 support.
1561
1562 Wed May 24 14:07:11 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1563
1564         * gencode.c (tab): Add bsrf and braf.
1565
1566 Mon Apr 24 15:09:49 1995  Jason Molenda  (crash@cygnus.com)
1567
1568         * configure.in: use ../../bfd/hosts/std-host.h, not
1569         ../bfd/hosts/std-host.h (which doesn't exist).
1570
1571 Mon Mar 27 10:32:34 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1572
1573         * run.c: parse arguments with getopt().
1574
1575 Sun Feb 26 15:27:24 1995  Steve Chamberlain  <sac@cygnus.com>
1576
1577         * configure.in: Use ../../bfd/hosts/std-host.h if specific
1578         host unavailable.
1579
1580 Mon Jan 23 16:10:58 1995  Torbjorn Granlund  <tege@rtl.cygnus.com>
1581
1582         * interp.c (macw): Sign extend MACH at bit 10 for non-saturating case.
1583
1584 Sun Jan 22 13:55:36 1995  Torbjorn Granlund  <tege@rtl.cygnus.com>
1585
1586         * gencode.c (op_tab): Make MAC.W call macw, not abort.
1587         * interp.c (macw): New function.
1588         (S): New #define.
1589
1590 Sat Jan 21 15:52:30 1995  Torbjorn Granlund  <tege@rtl.cygnus.com>
1591
1592         * gencode.c (op_tab): New code for ADDV and SUBV.
1593         Make MAC.L abort sicne it is not implemented.
1594
1595         * interp.c (dmul): Handle the signed case by adjusting after unsigned multiply.
1596         Get rid of __GNUC__ conditional.
1597
1598 aThu Jan 19 05:50:50 1995  Torbjorn Granlund  <tege@rtl.cygnus.com>
1599
1600         * gencode.c (op_tab): Also replace NEGC, and try again with SUBC.
1601         Change ADDC for symmetry.
1602
1603         * gencode.c (op_tab): Replace code for ADDC and SUBC.
1604
1605 Mon Jan  9 15:43:53 1995  Stu Grossman  (grossman@cygnus.com)
1606
1607         * interp.c:  Remove def of INLINE.  This comes from bfd.h.  Also,
1608         declare IOMEM before using it.
1609
1610 Wed Dec 28 21:25:31 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1611
1612         * interp.c (BUSERROR): New macro.
1613         ([r|w][bwl]at[little|big]) New functions.
1614         (sim_resume): If GO32 check for interrupt every now
1615         and again.  Decrement PC if SIGBUS seen.
1616         * run.c (main):  Return result of simulated _exit.
1617
1618 Mon Dec  5 21:59:51 1994  Doug Evans  <dje@canuck.cygnus.com>
1619
1620         * Makefile.in (gencode): Allow build in different directory.
1621
1622 Wed Nov 30 17:47:13 1994  Jim Wilson  <wilson@chestnut.cygnus.com>
1623
1624         * Makefile.in (gencode): Change $< to gencode.c for portability.
1625
1626 Wed Nov 23 21:31:55 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1627
1628         * interp.c ([wr][bwl]at): New functions.
1629         (trap): Cope with both byte modes.
1630
1631 Thu Sep  8 17:35:07 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1632
1633         * gencode.c (tab): Simulate T bit after a negc insn right.
1634         * interp.c (RSBAT): Sign extend the arg.
1635         (ACE_FAST): New macro.
1636         (sim_resume): Remove obsolete test of sim_timeout.
1637
1638 Fri Aug  5 14:12:31 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
1639
1640         * interp.c (IOMEM): New function, simulates very basic I/O area of
1641         the SH.
1642         (WBAT, RBAT) : Call I/O functions.
1643         * gencode.c (tab): Special case trapa #3.
1644
1645 Mon Jun 27 18:04:54 1994  Steve Chamberlain  (sac@cirdan.cygnus.com)
1646
1647         * run.c (main): Specify the file type again.
1648
1649 Thu May 26 19:04:37 1994  Steve Chamberlain  (sac@thepub.cygnus.com)
1650
1651         * interp.c (trap): Fix irix incompatibility.
1652         * run.c (main): open without specifying file type.
1653
1654 Wed May 18 14:18:53 1994  Doug Evans  (dje@canuck.cygnus.com)
1655
1656         * interp.c (sim_*): Make result void where there isn't one.
1657         (sim_set_pc): Delete.
1658         (sim_info): Delete printf_fn arg, all callers changed.
1659         Call printf_filtered instead.
1660         (sim_close): New function.
1661         (sim_load): New function.
1662         (sim_create_inferior): Renamed from sim_set_args, all callers changed.
1663         * run.c: #include <varargs.h>, "remote-sim.h".
1664         (printf_filtered): New function.
1665
1666 Wed Apr 27 12:03:48 1994  Steve Chamberlain  (sac@cygnus.com)
1667
1668         * gencode.c (table): Get direction of some opcodes right.
1669         (trapa, rte): Implement fully.
1670         * interp.c (trap): Make stat call more portable.
1671
1672 Fri Feb 11 21:59:38 1994  Steve Chamberlain  (sac@sphagnum.cygnus.com)
1673
1674         * gencode.c (main, gendefines): New -d option prints table of defines.
1675         * interp.c (trap): Add a load of system calls.
1676         (sim_memory_size): Now default to 8Mbyte.
1677         (PARANOID): Keep vector of registers with undefined contents.
1678
1679 Mon Nov 15 14:37:18 1993  Steve Chamberlain  (sac@jonny.cygnus.com)
1680
1681         * gencode.c: mova uses aligned addresses
1682         * interp.c (trap): Return results in r0.
1683
1684 Tue Oct 26 10:38:55 1993  Doug Evans  (dje@canuck.cygnus.com)
1685
1686         * Makefile.in (CSEARCH): Add -I$(srcdir)/../../gdb
1687         * interp.c: #include "remote-sim.h".
1688         (sim_resume): int result, new arg `siggnal'.
1689         (sim_write): Use SIM_ADDR for type of arg `addr'.
1690         (sim_read): Use SIM_ADDR for type of arg `addr'.
1691         Use unsigned char * for `buffer'.
1692         (sim_store_register): int result.
1693         (sim_fetch_register): Ditto.
1694         (sim_stop_reason): Renamed from sim_stop_signal.  New arg `reason'.
1695         (sim_set_pc): int result, use SIM_ADDR for type of arg `x'.
1696         (sim_info): int result, new args `verbose', `printf_fn'.
1697         (sim_kill): int result.
1698         (sim_open): int result, new arg `name'.
1699         * run.c: #include <stdio.h>
1700         (main): Update call to sim_info.
1701
1702 Sat Oct 23 15:09:29 1993  Doug Evans  (dje@canuck.cygnus.com)
1703
1704         * interp.c (sim_stop_signal): Result is now enum sim_stop.
1705
1706 Fri Oct  8 10:47:09 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1707
1708         * gencode.c (table): Becomes unsigned.
1709         * interp.c (trap): Get right breakpoint SIGnum. (sim_write,
1710         sim_read): Return number of bytes copied.  (sim_store_register):
1711         Value passed by reference. (sim_kill, sim_open, sim_set_args): New functions.
1712
1713 Tue Sep  7 16:24:13 1993  Stan Shebs  (shebs@rtl.cygnus.com)
1714
1715         * interp.c (sim_info): Fix small typo in printf string.
1716
1717 Thu Aug  5 11:37:48 1993  Stan Shebs  (shebs@rtl.cygnus.com)
1718
1719         * interp.c (sim_resume): Set memory after pointers inited.
1720
1721 Mon Aug  2 14:13:22 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1722
1723         * interp.c (get_now): Use time system call.
1724         * Makefile.in: install correctly.
1725
1726 Tue Jul  6 10:30:46 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1727
1728         * run.c (main), interp.c (sim_set_timeout): Remove timeout
1729         functionality.
1730
1731 Thu Jun 24 13:29:57 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)
1732
1733         * Makefile.in: don't run indent everytime; also add a space in the
1734         includes
1735
1736 Thu Jun 17 18:30:42 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1737
1738         * gencode.c: Fix some opcodes.
1739         * interp.c: Support for profiling and portability fixes.
1740         * run.c (main): Get profiling args.
1741
1742 Wed May  5 13:17:22 1993  Steve Chamberlain  (sac@cygnus.com)
1743
1744         * gencode.c (tab): Lint for sgi compiler
1745         * interp.c: Lint for sgi compiler.
1746
1747 Mon May  3 15:25:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1748
1749         * run.c (main): Support for resizing simulated RAM.
1750         * Makefile.in: Support for broken makes.
1751         * interp.c, gencode.c: Lint.
1752
1753 Mon Apr 26 18:01:10 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1754
1755         * created