1 2013-01-28 Nick Clifton <nickc@redhat.com>
3 * simops.c (v850_rotl): New function.
4 (v850_bins): New function.
5 * simops.h: Add prototypes fir v850_rotl and v850_bins.
6 * v850-dc: Add entries for V850e3v5.
7 * v850.igen: Add support for v850e3v5.
8 (ld.dw, st.dw, rotl, bins): New patterns.
10 2013-01-10 Nick Clifton <nickc@redhat.com>
12 * interp.c (sim_open): Add support for bfd_arch_v850_rh850
13 architecture type. Add support for bfd_mach_v850e2 and
14 bfd_mach_v850e2v3 machine numbers.
15 * v850.igen (dbtrap): Add support for SIM_OPEN_DEBUG.
16 (cmpf.d): Correct order of operands.
18 (trncf.dul): New pattern.
19 (trncf.duw): New pattern.
20 (trncf.sul): New pattern.
21 (trncf.suw): New pattern.
22 * v850-dc: Correct bitfield selection for TRNCF.SW and CVTF.SW.
24 2012-09-13 Nick Clifton <nickc@redhat.com>
26 * v850.igen (W,WWWW): Correct computation of register number.
27 (JR32): Remove unnecessary comma.
28 (cmovf.s): Register 0 is an invalid source register.
29 (maddf.s): Remove bogus intermediary rounding.
31 (trncf.sl): Remove bogus initial rounding.
36 2012-06-15 Joel Brobecker <brobecker@adacore.com>
38 * config.in, configure: Regenerate.
40 2012-03-28 Rathish C <rathish.c@kpitcummins.com>
42 * sim-main.h (struct _v850_regs): Add new fields mpu0_sregs,
43 mpu1_sregs, and fpu_sregs.
44 (MPU0_SR, MPU1_SR, FPU_SR): New macros for accessing new fields
47 (SP): Redefine using SP_REGNO.
48 (PSW_REGNO, EIIC, FEIC, DBIC, DIR, EIWR, FEWR, DBWR, BSEL, PSW_NPV)
49 (PSW_DMP, PSW_IMP, ECR_EICC, ECR_FECC, FPSR, FPSR_REGNO, FPEPC)
50 (FPST, FPST_REGNO, FPCC, FPCFG, FPCFG_REGNO, FPSR_DEM, FPSR_SEM)
51 (FPSR_RM, FPSR_RN, FPSR_FS, FPSR_PR, FPSR_XC, FPSR_XCE, FPSR_XCV)
52 (FPSR_XCZ, FPSR_XCO, FPSR_XCU, FPSR_XCI, FPSR_XE, FPSR_XEV)
53 (FPSR_XEZ, FPSR_XEO, FPSR_XEU, FPSR_XEI, FPSR_XP, FPSR_XPV)
54 (FPSR_XPZ, FPSR_XPO, FPSR_XPU, FPSR_XPI, FPST_PR, FPST_XCE)
55 (FPST_XCV, FPST_XCZ, FPST_XCO, FPST_XCU, FPST_XCI, FPST_XPV)
56 (FPST_XPZ, FPST_XPO, FPST_XPU, FPST_XPI, FPCFG_RM, FPCFG_XEV)
57 (FPCFG_XEZ, FPCFG_XEO, FPCFG_XEU, FPCFG_XEI, GET_FPCC, CLEAR_FPCC)
58 (SET_FPCC, TEST_FPCC, FPSR_GET_ROUND, MPM, MPC, MPC_REGNO, TID)
59 (PPA, PPM, PPC, DCC, DCV0, DCV1, SPAL, SPAU, IPA0L, IPA0U, IPA1L)
60 (IPA1U, IPA2L, IPA2U, IPA3L, IPA3U, DPA0L, DPA0U, DPA1L, DPA1U)
61 (DPA2L, DPA2U, DPA3L, DPA3U, PPC_PPE, SPAL_SPE, SPAL_SPS, VIP)
62 (VMECR, VMTID, VMADR, VPECR, VPTID, VPADR, VDECR, VDTID, MPM_AUE)
63 (MPM_MPE, VMECR_VMX, VMECR_VMR, VMECR_VMW, VMECR_VMS, VMECR_VMRMW)
64 (VMECR_VMMS, IPA2ADDR, IPA_IPE, IPA_IPX, IPA_IPR, IPE0, IPE1, IPE2)
65 (IPE3, IPX0, IPX1, IPX2, IPX3, IPR0, IPR1, IPR2, IPR3, DPA2ADDR)
66 (DPA_DPE, DPA_DPR, DPA_DPW, DPE0, DPE1, DPE2, DPE3, DPR0, DPR1)
67 (DPR2, DPR3, DPW0, DPW1, DPW2, DPW3, DCC_DCE0, DCC_DCE1, PPA2ADDR)
68 (PPC_PPC, PPC_PPE, PPC_PPM): New macros.
69 (FPU_COMPARE): New enum.
70 (TRACE_FP_INPUT_FPU1, TRACE_FP_INPUT_FPU2, TRACE_FP_INPUT_FPU3)
71 (TRACE_FP_INPUT_BOOL1_FPU2, TRACE_FP_INPUT_WORD2)
72 (TRACE_FP_RESULT_WORD1, TRACE_FP_RESULT_WORD2): New macros.
73 * simops.c (Add32): Update prototype.
74 (update_fpsr): New function.
75 (SignalException): New function.
76 (SignalExceptionFPE): New function.
77 (check_invalid_snan): New function.
78 (v850_float_compare): New function.
79 (v850_div): New function.
80 (v850_divu): New function.
81 (v850_sar): New function.
82 (v850_shl): New function.
83 (v850_shr): New function.
84 (v850_satadd): New function.
85 (v850_satsub): New function.
86 (load_data_mem): New function.
87 (store_data_mem): New function.
88 (mpu_load_mem_test): New function.
89 (mpu_store_mem_test): New function.
90 * simops.h: Add function prototype for above mentioned functions.
91 (check_cvt_fi, check_cvt_if, check_cvt_ff): Define.
92 * v850-dc: Add entry for v850e2 and v850e2v3.
93 * v850.igen: Add support for v850e2 and v850e2v3.
95 2012-03-24 Mike Frysinger <vapier@gentoo.org>
97 * aclocal.m4, config.in, configure: Regenerate.
99 2011-12-03 Mike Frysinger <vapier@gentoo.org>
101 * aclocal.m4: New file.
102 * configure: Regenerate.
104 2011-10-17 Mike Frysinger <vapier@gentoo.org>
106 * configure.ac: Change include to common/acinclude.m4.
108 2011-10-17 Mike Frysinger <vapier@gentoo.org>
110 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
111 call. Replace common.m4 include with SIM_AC_COMMON.
112 * configure: Regenerate.
114 2011-07-05 Mike Frysinger <vapier@gentoo.org>
116 * interp.c (sim_do_command): Delete.
118 2011-03-21 Kevin Buettner <kevinb@redhat.com>
120 * simops (OP_10007E0): Update errno handling as most traps
121 do not invoke the host's functionality directly. Invoke
122 sim_io_stat() instead of stat() for implementing TARGET_SYS_stat.
123 Implement TARGET_SYS_fstat, TARGET_SYS_rename, and TARGET_SYS_unlink.
125 2011-02-14 Mike Frysinger <vapier@gentoo.org>
127 * simops.c (OP_10007E0): Change zfree to free.
129 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
131 * interp.c (sim_store_register): Update return value to
134 2010-03-30 Mike Frysinger <vapier@gentoo.org>
136 * interp.c (interrupt_names): Add const to pointer type.
137 (do_interrupt): Add const to interrupt_name.
139 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
141 * configure: Regenerate.
143 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
145 * config.in: Regenerate.
146 * configure: Likewise.
148 * configure: Regenerate.
150 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
152 * configure: Regenerate to track ../common/common.m4 changes.
155 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
156 Daniel Jacobowitz <dan@codesourcery.com>
157 Joseph Myers <joseph@codesourcery.com>
159 * configure: Regenerate.
161 2008-02-05 DJ Delorie <dj@redhat.com>
163 * simops.c (OP_1C007E0): Compensate for 64 bit hosts.
164 (OP_18007E0): Likewise.
165 (OP_2C007E0): Likewise.
166 (OP_28007E0): Likewise.
167 * v850.igen (divh): Likewise.
169 * simops.c (OP_C0): Correct saturation logic.
175 * simops.c (OP_2A0): If the shift count is zero, clear the
177 (OP_A007E0): Likewise.
179 (OP_C007E0): Likewise.
181 (OP_8007E0): Likewise.
183 * simops.c (OP_2C207E0): Correct PSW flags for special divu
185 (OP_2C007E0): Likewise, for div.
186 (OP_28207E0): Likewise, for divhu.
187 (OP_28007E0): Likewise, for divh. Also, sign-extend the correct
189 * v850.igen (divh): Likewise, for 2-op divh.
191 * v850.igen (bsh): Fix carry logic.
193 2007-02-20 Daniel Jacobowitz <dan@codesourcery.com>
195 * Makefile.in (interp.o): Uncomment and update.
197 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
199 * acconfig.h: Remove.
200 * config.in: Regenerate.
202 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
204 * configure: Regenerated.
206 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
208 * configure: Regenerated.
210 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
212 * configure: Regenerated.
214 2005-03-23 Mark Kettenis <kettenis@gnu.org>
216 * configure: Regenerate.
218 2005-01-14 Andrew Cagney <cagney@gnu.org>
220 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
221 explicit call to AC_CONFIG_HEADER.
222 * configure: Regenerate.
224 2005-01-12 Andrew Cagney <cagney@gnu.org>
226 * configure.ac: Update to use ../common/common.m4.
227 * configure: Re-generate.
229 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
231 * configure: Regenerated to track ../common/aclocal.m4 changes.
233 2005-01-07 Andrew Cagney <cagney@gnu.org>
235 * configure.ac: Rename configure.in, require autoconf 2.59.
236 * configure: Re-generate.
238 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
240 * configure: Regenerate for ../common/aclocal.m4 update.
242 2004-01-18 Mark Kettenis <kettenis@gnu.org>
244 * simops.c: Include <sys/types.h>.
246 2003-09-05 Andrew Cagney <cagney@redhat.com>
247 Nick Clifton <nickc@redhat.com>
249 * interp.c (sim_open): Accept bfd_mach_v850e1.
250 * v850-dc: Add entry for v850e1.
251 * v850.igen: Add support for v850e1.
252 Add code for DBTRAP and DBRET instructions.
253 (dbtrap): Create a separate v850e1 specific instruction.
254 Only generate a trap if the target is not the v850e1.
255 Otherwise treat it as a special kind of branch.
256 (break): Mark as v850/v850e specific.
258 2003-05-16 Ian Lance Taylor <ian@airs.com>
260 * Makefile.in (SHELL): Make sure this is defined.
261 (tmp-igen): Use $(SHELL) whenever we invoke move-if-change.
263 2003-04-06 Nick Clifton <nickc@redhat.com>
265 * simops.c (OP_40): Delete. Move code to...
266 * v850-igen.c (): ...Here. Sign extend the first operand.
267 * simops.h (OP_40): Remove prototype.
269 2003-02-27 Andrew Cagney <cagney@redhat.com>
271 * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
273 2002-11-30 Andrew Cagney <cagney@redhat.com>
275 * simops.c: Use int, 1, 0 instead of boolean, true and false.
278 2002-09-27 Jim Wilson <wilson@redhat.com>
280 * simops.c (OP_E6077E0): And op1 with 7 after reading register, not
282 (BIT_CHANGE_OP): Likewise.
284 2002-09-26 Jim Wilson <wilson@redhat.com>
286 * simops (OP_10007E0): Don't subtract 4 from PC.
288 2002-09-19 Nick Clifton <nickc@redhat.com>
290 * interp.c (sim_open): Remove reference to v850ea.
291 (sim_create_inferior): Likewise.
293 * v850.igen: Remove all references to v850ea, including v850ea
294 specific instructions.
296 2002-08-29 Nick Clifton <nickc@redhat.com>
298 From 2001-08-23 Catherine Moore <clm@redhat.com>
300 * Makefile.in: Add gen-zero-r0 option.
301 * sim-main.h (GPR_SET, GPR_CLEAR): Define.
302 * simops.c (OP_24007E0): Sign extend the imm9
303 operand of a mul instruction.
305 2002-06-17 Andrew Cagney <cagney@redhat.com>
307 * simops.c (trace_result): Fix printf formatting.
309 2002-06-16 Andrew Cagney <ac131313@redhat.com>
311 * configure: Regenerated to track ../common/aclocal.m4 changes.
313 2001-12-02 Andrew Cagney <ac131313@redhat.com>
315 * Makefile.in (simops.h, table.c): Delete targets.
316 (tmp-gencode, gencode.o, gencode): Delete targets.
317 (simops.h): New file.
318 ($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
319 * gencode.c: Delete file.
321 2001-04-15 J.T. Conklin <jtc@redback.com>
323 * Makefile.in (simops.o): Add simops.h to dependency list.
325 2001-03-14 Andrew Cagney <ac131313@redhat.com>
327 * Makefile.in (gencode): Link with libintl.
329 2001-01-31 Jonathan Larmour <jlarmour@redhat.com>
331 * Makefile.in (gencode): Link with libopcodes in build tree rather
332 than building source files from there.
334 2000-05-30 Nick Clifton <nickc@cygnus.com>
336 * v850.igen: Remove illegal instruction pattern, since it is the
337 same as the breakpoint pattern.
339 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
341 * configure: Regenerated to track ../common/aclocal.m4 changes.
343 2000-04-14 Gary Thomas <gthomas@redhat.com>
345 * v850.igen: Define 'br *' as illegal since this is the only
346 way to provide a breakpoint on some v850 family processors.
348 2000-03-24 Frank Ch. Eigler <fche@redhat.com>
350 * v850.igen (ilgop): New insn pattern for four-byte breakpoints.
352 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
354 * configure: Regenerated to track ../common/aclocal.m4 changes.
356 1999-05-08 Felix Lee <flee@cygnus.com>
358 * configure: Regenerated to track ../common/aclocal.m4 changes.
360 Tue Dec 1 17:25:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
362 * Makefile.in (NL_TARGET): Define as -DNL_TARGET_v850.
364 Wed Nov 25 17:52:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
366 * Makefile.in (simops.o): Depends on targ-vals.h
367 * simops.c: Include targ-vals.h instead of
368 libgloss/.../syscall.h. Replace SYS_* with TARGET_SYS_*.
369 (divn, divun, OP_1C007E0, OP_18207E0, OP_1C207E0,OP_18007E0):
370 Replace signed long int with signed32.
372 Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com>
374 * interp.c: #include "itable.h".
375 (get_insn_name): New function.
376 (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
377 * sim-main.h (MAX_INSNS,INSN_NAME): Delete.
379 Wed May 6 19:43:27 1998 Doug Evans <devans@canuck.cygnus.com>
381 * sim-main.h (INSN_NAME): New arg `cpu'.
383 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
385 * configure: Regenerated to track ../common/aclocal.m4 changes.
387 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
389 * configure: Regenerated to track ../common/aclocal.m4 changes.
392 Sun Apr 26 15:19:14 1998 Tom Tromey <tromey@cygnus.com>
394 * acconfig.h: New file.
395 * configure.in: Reverted change of Apr 24; use sinclude again.
397 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
399 * configure: Regenerated to track ../common/aclocal.m4 changes.
402 Fri Apr 24 11:18:08 1998 Tom Tromey <tromey@cygnus.com>
404 * configure.in: Don't call sinclude.
406 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
408 * configure: Regenerated to track ../common/aclocal.m4 changes.
409 * sim-main.h (SIM_MAIN_H): Wrap header.
411 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
413 * configure: Regenerated to track ../common/aclocal.m4 changes.
415 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
417 * configure: Regenerated to track ../common/aclocal.m4 changes.
419 Tue Mar 10 15:54:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
421 * interp.c (sim_stop): Delete, second attempt.
423 Thu Feb 26 19:09:47 1998 Andrew Cagney <cagney@b1.cygnus.com>
425 * interp.c (sim_info): Delete.
427 Wed Feb 18 10:47:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
429 * sim-main.h (TRACE_ALU_INPUT*): Delete. Moved to sim-trace.[hc].
431 * simops.c (trace_result): Call trace_generic instead of
433 (trace_module): Change variable type to integer.
434 (trace_input): Initialize trace_module with TRACE_ALU_IDX.
436 * sim-main.h (trace_module): Change variable decl to integer type.
437 (TRACE_BRANCH*, TRACE_LD, TRACE_ST): Update.
439 Tue Feb 17 12:51:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
441 * interp.c (sim_store_register, sim_fetch_register): Pass in
442 length parameter. Return -1.
444 Tue Feb 3 16:24:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
446 * sim-main.h (IMEM16, IMEM16_IMMED): Rename IMEM and
447 IMEM_IMMED. To match recent igen change.
449 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
451 * configure: Regenerated to track ../common/aclocal.m4 changes.
453 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
455 * configure: Regenerated to track ../common/aclocal.m4 changes.
457 Fri Jan 30 09:51:27 1998 Andrew Cagney <cagney@b1.cygnus.com>
459 * sim-main.h (CPU_CIA): Delete, replaced by.
460 (CIA_SET, CIA_SET): Define.
462 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
464 * configure: Regenerated to track ../common/aclocal.m4 changes.
466 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
468 * configure: Regenerated to track ../common/aclocal.m4 changes.
471 Fri Dec 5 09:26:08 1997 Nick Clifton <nickc@cygnus.com>
473 * v850.igen: Revert break value back to its old value.
475 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
477 * configure: Regenerated to track ../common/aclocal.m4 changes.
479 Wed Dec 3 17:27:19 1997 Nick Clifton <nickc@cygnus.com>
481 * v850.igen: Make break have a zero first field, since otherwise
482 it clashes with the DIVH instruction.
484 Sat Nov 22 21:32:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
486 * simops.c (OP_10007E0): Rename SIGABRT -> SIM_SIGABRT. Give
487 sim_stopped instead of sim_signalled.
489 * v850.igen (BREAK), simops.c (OP_12007E0): Rename SIGTRAP to
491 (illegal): Rename SIGILL to SIM_SIGILL.
493 * sim-main.h, simops.c, interp.c: Do not include signal.h.
495 * sim-main.h: Include sim-signal.h instead of signal.h.
496 (SIGTRAP, SIGQUIT): Delete definition.
497 (SIG_V850_EXIT): Delete definition.
499 Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com>
501 * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS).
503 Fri Oct 31 10:33:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
505 * interp.c (sim_open): Check state magic number.
506 (sim-assert.h): Include.
508 Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
510 * v850.igen: Add model filter field to records.
512 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
514 * configure: Regenerated to track ../common/aclocal.m4 changes.
516 Fri Sep 26 11:56:02 1997 Felix Lee <flee@cygnus.com>
518 * sim-main.h: delete null override of SIM_ENGINE_HALT_HOOK and
519 SIM_ENGINE_RESTART_HOOK.
521 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
523 * configure: Regenerated to track ../common/aclocal.m4 changes.
525 Wed Sep 24 17:28:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
527 * sim-main.h (WITH_TARGET_WORD_MSB): Delete.
529 * configure.in (SIM_AC_OPTION_BITSIZE): Specify 32 bit
530 architecture with MSB == 31.
532 Wed Sep 24 14:04:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
534 * v850.igen: Make divh insn with RRRRR==0 breakpoint.
536 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
538 * configure: Regenerated to track ../common/aclocal.m4 changes.
540 Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
542 * Makefile.in (SIM_WARNINGS, SIM_ALIGNMENT, SIM_ENDIAN,
543 SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common.
544 (SIM_EXTRA_CFLAGS): Update.
546 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
548 * configure: Regenerated to track ../common/aclocal.m4 changes.
549 * configure.in: Really specify NONSTRICT_ALIGNMENT as the default.
551 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
553 * configure.in: Specify NONSTRICT_ALIGNMENT as the default.
554 * configure: Regenerated to track ../common/aclocal.m4 changes.
556 Fri Sep 19 10:37:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
558 * v850.igen (disp16): Use EXTEND16 to sign extend disp.
559 (disp22): Only shift left by 1, not 2.
560 ("jmp"): Ensure PC is 2 byte aligned.
562 * simops.c, v850.igen: Move "Bcond", "jr", "jarl" code to
563 v850.igen. Fix tracing.
565 * simops.c (OP_300, OP_400, OP_500): Move "sdl.b", "sld.h",
566 "sld.w" insns to v850.igen. Fix tracing.
567 (OP_70): Ditto for "sld.hu".
569 * v850.igen: Clarify tracing of "sld.b", "sld.h" et.al.
571 * simops.c (condition_met): Make global.
573 * sim-main.h (TRACE_ALU_INPUT3, TRACE_BRANCH0, TRACE_LD,
575 (TRACE_LD_NAME): Define.
577 * simops.c: Move "cmov", "cmov imm" to v850.igen, fix.
579 Wed Sep 17 16:21:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
581 * simops.c: Move "mov", "reti", to v850.igen, fix tracing.
583 * interp.c (hash): Delete.
585 * v850.igen (nop): Really do nothing.
587 * interp.c (do_interrupt): Mask interrupts after PSW is saved, not
589 * v850.igen (reti): Return to current PC not previous.
591 Wed Sep 17 14:02:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
593 * simops.c: Move "ctret", "bsw", "hsw" to v850.igen, fix tracing.
594 (trace_module): Global, save component/module name across insn.
596 * simops.c: Move "bsh" to v850.igen, fix.
598 * v850.igen (callt): Load correct number of bytes. Fix tracing.
599 (stsr, ldsr): Correct src, dest fields. Fix tracing.
600 (ctret): Force alignment. Fix tracing.
602 Tue Sep 16 22:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
604 * simops.c (trace_output): Add result argument.
605 (trace_result): New function. Simpler version of trace_output,
606 assumes trace needed.
607 (trace_output): Call trace_result.
608 (trace_output): For IMM_REG_REG, trace correct register.
609 (trace_input): Add case for 16bit immediates.
610 (OP_600, OP_640, OP_680, OP_6C0, OP_6A0): Use.
612 * sim-main.h (TRACE_ALU_INPUT, TRACE_ALU_RESULT): Define.
613 (trace_values, trace_name, trace_pc, trace_num_values): Make
617 v850.insn (movea, stsr): Use.
618 (sxb, sxh, zxb, zxh): Ditto.
620 Tue Sep 16 21:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
622 * simops.c: Move "movea" from here.
623 * v850.igen: To here.
625 * v850.igen (simm16): Define, sign extend imm16.
626 (uimm16): Define, no sign extension.
627 (addi, andi, movea, movhi, mulhi, ori, satsubi, xori): Use.
629 * simops.c: Move "sxh", "switch", "sxb", "callt", "dispose",
631 * v850.igen: To here.
632 (switch): Fix off by two error in NIA calc.
634 Tue Sep 16 15:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
636 * simops.c (trace_pc, trace_name, trace_values, trace_num_values):
638 (trace_input): Just save pc, name and values for trace_output.
639 (trace_output): Write trace values to a buffer. Use
640 trace_one_insn to print trace info and buffer.
641 (SIZE_OPERANDS, SIZE_LOCATION): Delete.
643 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
645 * sim-main.h (struct _sim_cpu): Add psw_mask so that reserved bits
648 * simops.c (OP_2007E0, OP_4007E0): Move "ldsr", "stsr"
649 instructions from here.
650 * v850.igen (ldsr, stsr): To here. Mask out reserved bits when
653 * interp.c (sim_open): Set psw_mask if machine known.
655 Tue Sep 16 10:20:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
657 * v850-dc: Add rule to diferentiate between breakpoint and divh.
658 * v850.igen (break): New instruction, breakpoint simulator.
659 * v850.igen (breakpoint): Enable. Change to a 32bit instruction.
661 Mon Sep 15 18:44:05 1997 Jim Wilson <wilson@cygnus.com>
663 * simops.c (Multiply64): Don't store into register zero.
665 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
667 * Makefile.in (semantics.o): Add dependency.
669 * sim-main.h (SAVE_1, SAVE_2): Perform backward compatible save,
670 do not adjust CIA/NIA.
672 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
674 * simops.c (OP_300, OP_400, OP_70): Make behavour depend on PSW[US].
676 * simops.c: Move "divun", "sld.bu", "divhn", "divhun", "divn",
677 "divun", "pushml" code from here to v850.igen.
678 (divun): Make global.
679 (type3_regs): Make global
681 * v850.igen: Move simops.c code to here.
683 * interp.c (sim_create_inferior): For v850eq set US bit by
686 * interp.c (sim_open): Don't set arch, now set by
689 * configure: Regenerated to track ../common/aclocal.m4 changes.
691 Mon Sep 15 14:39:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
693 * simops.c (op_types): Move from here.
696 * sim-main.h (trace_input, trace_output), simops.c: Make global.
698 * simops.c (OP_60): Move "jmp" code from here.
699 * v850.igen (jmp): To here.
701 * simops.c (OP_60): Move "sld.bu" code from here.
702 * v850.igen (sld.bu): To here.
704 Fri Sep 12 15:11:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
706 * v850.igen (prepare, ...): Add to v850eq architecture.
708 * interp.c (sim_open): Default to v850eq.
710 * interp.c (sim_open): Default to v850e.
711 * sim-main.h (signal.h): Include.
713 * v850.igen (illegal): Report/halt illegal instructions.
715 * Makefile.in (SIM_EXTRA_CFLAGS): Add SIM_RESERVED_BITS.
717 * configure.in: Add reserved bits option.
718 * configure: Regenerate.
720 Thu Sep 11 08:40:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
722 * interp.c (sim_open): Use sim_do_commandf instead of asprintf.
724 * sim-main.h (INSN_NAME):
726 * Makefile.in (INCLUDE): Add SIM_EXTRA_DEPS.
727 (SIM_EXTRA_DEPS): Add itable.h
728 (tmp-gencode): Does not depend on simops.h
730 * sim-main.h (itable.h): Include.
731 (MAX_INSNS, INSN_NAME): Define.
733 * interp.c: Compute inttype from the interrupt_names index that
736 Wed Sep 10 10:25:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
738 * simops.c (trace_input): Use trace_printf instead of
740 (trace_output): Ditto.
741 (trace_input): Only trace when TRACE_ALU_P. Delete code
742 disasembling instruction.
743 (trace_output): Only trace when TRACE_ALU_P.
745 Tue Sep 9 01:29:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
747 * simops.c (trace_input, trace_output): Use sim_io_printf.
748 (OP_620): Pass correct argument to trace.
750 (trace_input): Obtain prog_bfd, text_start et.al from simulator
753 Mon Sep 8 21:03:52 1997 Andrew Cagney <cagney@b1.cygnus.com>
755 * v850.igen: New file.
758 Mon Sep 8 18:33:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
761 * sim-main.h (SEXT16): Delete, use EXTEND16.
762 (SEXT8): Delete, use EXTEND8.
763 (SEXT32): Delete, used?
764 (SEXT40, SEXT44, SEXT64): Use UNSIGNED64 for constants, not ...LL.
765 (WITH_TARGET_WORD_MSB): Define as 31. v850 little bit endian.
767 * simops.c: Use EXTEND15 from sim-bits instead of SEXT16.
769 * sim-main.h (DEBUG_TRACE, DEBUG_VALUES, v850_debug): Delete,
770 replace with TRACE_INSN_P and TRACE_ALU_P.
772 * simops.c (trace_input, trace_output): Update.
774 * interp.c (sim_engine_run): Delete.
775 (lookup_hash): Delete.
776 (sim_open): Do not fill hash table.
779 Fri Sep 5 17:04:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
781 * simops.c (OP_FFFF): Use sim_engine_halt.
785 * sim-main.h (struct sim_cpu): Delete member exception. Using
788 * interp.c (sim_info): Do not do anything in sim-info.
789 (sim_stop): Delete, replace with sim-stop.
790 (sim_stop_reason): Delete, replace with sim-reason.
792 * sim-main.h (WITH_WATCHPOINTS): Define.
793 (WITH_MODULO_MEMORY): Define
795 * Makefile.in (SIM_OBJS): Add sim-resume, sim-watch, sim-stop,
798 * interp.c (enum interrupt_cond_type): Delete.
799 (struct interrupt_generator): Delete.
800 (enum interrupt_type): Drop int_none.
801 (sim_open): Initialize WATCHPOINT module.
802 (sim_resume, sim_run): Rename sim_resume to sim_run.
803 (sim_engine_run): Replace interrupt code with call to sim-events.
804 (sim_set_interrupt): Delete.
805 (sim_parse_number): Delete.
807 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
809 * configure: Regenerated to track ../common/aclocal.m4 changes.
811 Thu Sep 4 18:11:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
813 * simops.c (fetch_argv): New function, fetch a arg vector from
816 * configure.in: Check for fork, execve, execv.
817 * configure: Regenerate.
819 * interp.c (sim_store_register, sim_fetch_register): Use H2T_4 and
820 T2H_4 for byte swapping.
822 * sim-main.h, interp.c (get_word, get_half, get_byte, put_word,
823 put_half, put_byte): Delete.
825 * Makefile.in (SIM_OBJS): Add sim-memopt.o module.
827 * sim-main.h (load_mem, store_mem): Redefine as macros.
828 (IMEM, IMEM_IMMED): New macros - fetch instructions.
830 * simops.c (OP_10007E0): For SYS_read, SYS_write, SYS_open
831 transfer data via a buffer.
832 (fetch_str): New function, fetch string from memory.
834 * Makefile.in (SIM_OBJS): Add sim-hrw.o module.
836 * interp.c (sim_open): Establish memory maps using sim-memopt.c
838 (sim_do_command): Print error if memory-map command is used. Call
840 (map): Delete, replaced by sim-core.
841 (sim_memory_init): Delete, replaced by sim-core.
842 (sim_set_memory_map): Delete, replaced by sim-memopt.
843 (load_mem): Delete, replaced by sim-core.
844 (store_mem): Delete, replaced by sim-core.
845 (sim_write): Delete, replaced by sim-hrw.
846 (sim_read): Delete, replaced by sim-hrw.
848 * sim-main.h (struct sim_state): Remove memory members, using
851 Wed Sep 3 10:18:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
853 * sim-main.h: Replace SIM_HAVE_FLATMEM with mem ptr.
854 * interp.c (map): Do not add to a void pointer.
856 * Makefile.in (INCLUDE): Add sim-main.h
858 * configure.in: Check for time.h
859 * configure: Re-generate.
861 * interp.c (struct interrupt_generator): Make time unsigned long,
863 (sim_resume): Make oldpc SIM_ADDR.
864 (struct hash_entry): Make mask/opcode unsigned.
866 * v850_sim.h (struct simops ): Make opcode and mask unsigned.
868 * simops.c (utime.h): Include if available.
869 (OP_10007E0): Check for UTIME function.
870 (divun): Put parentheses around shift argument.
871 (OP_640): Put parentheses around shift argument, was wrong.
872 (OP_107F0): Return something.
874 * interp.c (sim_parse_number): Use strtoul not strtol.
875 (sim_resume): Use sim_elapsed_time_get to keep track of the time.
877 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
878 (SIM_AC_OPTION_ENDIAN): Set to hardwired big.
879 (SIM_AC_OPTION_HOST_ENDIAN): Add.
880 (AC_CHECK_FUNCS): Add utime.
881 (AC_CHECK_HEADERS): Add stdlib.h, string.h, strings.h, utime.h
882 configure: Regenerate.
885 * Makefile.in (SIM_RUN_OBJS): Use nrun.o.
886 (SIM_OBJS): Add sim-io.o, sim-hload.o, sim-utils.o, sim-options.o,
887 sim-config.o, sim-module.o, sim-events.o, sim-core.o,
888 sim-endian.o, sim-engine.o, sim-trace.o, sim-profile.o
889 (SIM_ENDIAN, SIM_WARNGINS): Define.
891 * simops.c (OP_10007E0): Use sim_io_* for transfers.
893 * interp.c (sim_resume): Pass sd around.
895 * simops.c (sim-main.h): Include.
897 * gencode.c (write_template): Generate #include sim-main.h.
898 (write_opcodes): Ditto.
900 * interp.c (prog_bfd, prog_bfd_was_opened_p): Delete.
901 (v850_callback): Ditto.
902 (sim_kind, myname): Ditto.
903 (lookup_hash): Pass SD. Use sim_io_error.
904 (sim_set_memory_map): Pass in SD, use.
905 (init_system): Pass in SD, use.
907 (sim_set_profile): Delete.
908 (sim_set_profile_size): Delete.
909 (do_interrupt): Pass in SD, use.
910 (sim_info): Use sim_io_printf.
911 (sim_create_inferior): Reset registers. Set PC from prog_bfd
913 (sim_load): Delete, use common/sim-hload.c
914 (sim_size): Rename to sim_memory_init.
915 (sim_write): Remove call to init_system.
916 (init_system): Delete.
917 (sim_set_callbacks): Delete.
918 (sim_set_interrupt): Pass in SD, use.
919 (start_time): Delete.
921 * v850_sim.h: Remove everything except `struct simops' from here.
922 * sim-main.h: Move most to here.
923 * gencode.c: Move #includes to here.
925 * sim-main.h(struct _sim_cpu): Rename struct _state.
926 (#define PC, et.al.): Update
927 (v850_callback): Delete. Replaced with SIM_DESC arg.
928 (int8, uint8, int16, uint16, int32, uint32): Define types using
929 unsigned8 et.al from common/sim-types.h.
930 * sim-main.h (State): Define as STATE_CPU.
932 Mon Sep 1 12:07:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
934 * configure.in: Check for time, chmod.
935 * configure: Regenerate.
936 * simops.c (SYS_time, SYS_chmod): Use HAVE_TIME, HAVE_CHMOD.
938 * simops.c (../../libgloss/v850/sys/syscall.h): Include instead of
940 (OP_10007E0): Check the existance each SYS_* macro independantly.
942 * v850_sim.h (SIGQUIT, SIGTRAP): Only define if missing.
944 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
946 * configure: Regenerated to track ../common/aclocal.m4 changes.
949 Tue Aug 26 10:42:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
951 * interp.c (sim_kill): Delete.
952 (sim_create_inferior): Add ABFD argument.
953 (sim_load): Move setting of PC from here.
954 (sim_create_inferior): To here.
956 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
958 * configure: Regenerated to track ../common/aclocal.m4 changes.
961 Mon Aug 25 11:31:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
963 * interp.c (sim_open): Add ABFD argument.
965 Fri Aug 22 10:39:28 1997 Nick Clifton <nickc@cygnus.com>
967 * simops.c (bsh): Only set CY flag if either of the bottom
970 * simops.c (prepare, dispose): Lower numbered
971 registers go to higher numbered address.
973 * simops.c (unsigned divide instructions): S bit set if result has
976 * simops.c (pushml, pushmh, popml, popmh): Lower numbered
977 registers go to higher numbered address.
979 Wed Aug 20 13:56:35 1997 Nick Clifton <nickc@cygnus.com>
981 * simops.c (OP_107E0, OP_107F0, OP_307E0, OP_307F0): Use correct
982 interpretation of SR bit in list18 structure.
983 (divn, divun): New functions to perform N step divide functions.
985 Mon Aug 18 10:59:02 1997 Nick Clifton <nickc@cygnus.com>
987 * simops.c (OP_300, OP_400, OP_60, OP_70): Support variant opcodes
988 with US bit set in the PSW.
990 Wed Aug 13 19:06:55 1997 Nick Clifton <nickc@cygnus.com>
992 * interp.c (sim_resume): Opcode functions return amount to be
993 added to PC and all opcodes take a standard format in the OP[]
996 (do_format_*): Functions removed.
998 * v850_sim.h (SP, EP): New register mnemonics.
1000 * gencode.c (write_header): Functions prototypes return an
1003 * simops.c: Opcode functions return amount to be added to PC.
1005 * v850_sim.h (CTPC, CTPSW, CTBP): New register mnemonics.
1007 * simops.c: Add support for v850e instructions.
1009 * simops.c: Add support for v850eq instructions.
1011 Tue May 20 10:24:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1013 * interp.c (sim_open): Add callback argument.
1014 (sim_set_callbacks): Delete SIM_DESC argument.
1016 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1018 * configure: Regenerated to track ../common/aclocal.m4 changes.
1020 Wed Apr 23 17:20:16 1997 Doug Evans <dje@canuck.cygnus.com>
1022 * interp.c (prog_bfd_was_opened_p): New static local.
1023 (prog_bfd): New global variable.
1024 (sim_open): Undo patch to add -E support.
1025 (sim_close): Close prog_bfd if sim_load opened it.
1026 (sim_load): Record bfd of loaded file in prog_bfd.
1027 * simops.c (prog_bfd): Renamed from exec_bfd.
1029 Fri Apr 18 14:17:12 1997 Andrew Cagney <cagney@b1.cygnus.com>
1031 * interp.c (sim_stop): Stub function.
1033 Thu Apr 17 03:53:18 1997 Doug Evans <dje@canuck.cygnus.com>
1035 * Makefile.in (SIM_OBJS): Add sim-load.o.
1036 * interp.c (sim_kind, myname): New static locals.
1037 (sim_open): Set sim_kind, myname. Ignore -E arg.
1038 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
1039 load file into simulator. Set start address from bfd.
1040 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1042 Wed Apr 16 19:53:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1044 * simops.c (OP_10007E0): Only provide system calls SYS_execv,
1045 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
1047 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1049 * configure: Regenerated to track ../common/aclocal.m4 changes.
1052 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1054 * interp.c (sim_open): New arg `kind'.
1056 * configure: Regenerated to track ../common/aclocal.m4 changes.
1058 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1060 * configure: Regenerated to track ../common/aclocal.m4 changes.
1062 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1064 * configure: Regenerated to track ../common/aclocal.m4 changes.
1066 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1068 * configure: Re-generate.
1070 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1072 * configure: Regenerate to track ../common/aclocal.m4 changes.
1074 Thu Mar 13 13:00:54 1997 Doug Evans <dje@canuck.cygnus.com>
1076 * interp.c (sim_open): New SIM_DESC result. Argument is now
1078 (other sim_*): New SIM_DESC argument.
1080 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
1082 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1083 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1084 * configure.in: sinclude ../common/aclocal.m4.
1085 * configure: Regenerated.
1087 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1089 * configure configure.in Makefile.in: Update to new configure
1090 scheme which is more compatible with WinGDB builds.
1091 * configure.in: Improve comment on how to run autoconf.
1092 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1093 * Makefile.in: Use autoconf substitution to install common
1096 Mon Jan 20 16:05:34 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1098 * simops.c (OP_{E0,2E0,6E0}): The multiply operations sign extend,
1101 Tue Jan 14 17:06:03 1997 Stu Grossman (grossman@critters.cygnus.com)
1103 * simops.c: Put ifdefs around things to make MSVC happy. Get rid
1104 of unistd.h. Disable SYS_stat, SYS_chown, SYS_time, SYS_times,
1105 SYS_gettimeofday and SYS_utime from MSVC.
1107 Tue Dec 31 18:11:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1109 * simops.c (OP_10007E0): Know that kill encodes the signal number
1110 via: 0xdead0000 | signal and turn it back into a signal.
1112 Fri Dec 27 14:44:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1114 * v850_sim.h (SIG_V850_EXIT): Define as -1.
1116 * interp.c (sim_open): Cast calloc function.
1117 (sim_stop_reason): If signal is SIG_V850_EXIT, inform gdb the
1118 program exited with the appropriate exit code.
1119 (sim_set_interrupt): Declare buildargv.
1121 * simops.c (OP_10007E0): Make exit signal normal exit. Make time
1122 type correct and work on big endian systems.
1124 Wed Nov 20 02:18:44 1996 Doug Evans <dje@canuck.cygnus.com>
1126 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
1127 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
1128 * configure.in: Simplify using macros in ../common/aclocal.m4.
1129 Call AC_CHECK_HEADERS(unistd.h).
1130 * configure: Regenerated.
1131 * config.in: New file.
1132 * simops.c: #include "config.h". #include <unistd.h> if present.
1134 Sun Nov 3 23:02:54 1996 Stan Shebs <shebs@andros.cygnus.com>
1136 * v850_sim.h (State): New slots dummy_mem, pending_nmi.
1137 (EIPC, etc): New macros for system registers.
1138 * simops.c, interp.c: Use everywhere.
1140 * interp.c: Add support for interrupts issued by interrupt
1141 generators, either PC- or time-based. Controlled by simulator
1142 command "sim interrupt".
1144 * interp.c: Add support for variable-size allocation of memory,
1145 via simulator command "sim memory-map".
1146 (map): Issue SIGSEGV for references to invalid memory regions.
1148 Thu Oct 31 14:44:10 1996 Gavin Koch <gavin@cygnus.com>
1150 * simops.c: Include <sys/time.h> for struct timeval and
1153 Wed Oct 30 08:49:10 1996 Jeffrey A Law (law@cygnus.com)
1155 * simops.c (OP_10007E0): Handle SYS_times and SYS_gettimeofday.
1157 * simops.c (OP_10007E0): Handle SYS_time.
1159 Tue Oct 29 14:22:55 1996 Jeffrey A Law (law@cygnus.com)
1161 * simops.c: Include <sys/stat.h>.
1162 (OP_10007E0): Handle SYS_stat.
1164 Thu Oct 24 12:26:35 1996 Jeffrey A Law (law@cygnus.com)
1166 * simops.c (OP_10007E0): Don't declare errno.
1168 * simops.c (OP_500): Mask off low bit in displacement
1170 (OP_501): Similarly.
1172 * simops.c (OP_500): Fix displacement handling for sld.w.
1173 (OP_501): Similarly for sst.w.
1175 * simops.c (trace_input): Remove all references to SEXT7.
1176 (OP_300, OP_400, OP_500, OP_380, OP_480, OP_501): Displacement
1177 is zero extended for sst/sld instructions.
1178 * v850_sim.h (SEX7): Delete. It's no longer needed (and it
1179 was incorrect anyway).
1181 Thu Oct 24 10:33:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1183 * Makefile.in: Get rid of srcroot. Set all INSTALL macros via
1185 * gencode.c (write_opcodes): Pad operands field to account for
1187 * simops.c: Include errno.h. Exclude SYS_chown, since MSVC
1188 doesn't support it. (Why is this here in the first place?!?)
1189 * v850_sim.h: Get rid of 64 bit defs. Also, get rid of #elif's.
1190 Change number of operands in struct simops from 9 to 6. Define
1191 SIGTRAP and SIGQUIT for MSVC.
1193 Tue Oct 15 16:19:51 1996 Stu Grossman (grossman@critters.cygnus.com)
1195 * interp.c (MEM_SIZE): It's now bytes, not a power of 2.
1196 * (map): Add support for external mem in the 1->2 meg range.
1197 Also, abort() when memory access is way out of bounds. (Better to
1198 die than to give wrong result. (This will be fixed later.))
1199 * (sim_size): MEM_SIZE is now bytes, not shift factor.
1201 Tue Oct 1 15:53:24 1996 Gavin Koch <gavin@cygnus.com>
1203 * simops.c (trace_input): Swapped order of operands for output
1204 output of OP_IMM_REG. Changed the fetching of the operands for
1205 OP_LOAD32, and OP_STORE32 to work like op-function.
1207 Mon Sep 30 15:46:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1209 * interp.c: Move includes of remote-sim.h and callback.h to
1211 * (lookup_hash): Add PC to report of hash failure.
1212 * (map load_mem store_mem): New memory subsystem. Models V851
1214 * (sim_write sim_read): Use new memory subsystem.
1215 * (sim_resume): Don't load and save PC into EIPC anymore. Needed
1216 to make user-defined traps work right.
1217 * simops.c (OP_*): Use new memory subsystem.
1218 * (OP_14007E0 (reti)): Implement reti.
1219 * (OP_14996E0 (trap)): Implement user-defined traps. Move I/O to
1220 trap 31. Use new memory subsystem.
1221 * v850_sim.h: Prototypes for load_mem, store_mem and map. Use
1222 load_mem in RLW macro.
1224 Fri Sep 27 18:34:09 1996 Stu Grossman (grossman@critters.cygnus.com)
1226 * gencode.c (write_opcodes): Output hex values for opcode mask
1228 * interp.c (sim_resume): Save and restore PC from the appropriate
1230 * (sim_fetch_register sim_store_register): Fix byte-order problem
1231 with reading and writing registers.
1232 * simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
1234 Fri Sep 27 17:42:37 1996 Jeffrey A Law (law@cygnus.com)
1236 * simops.c (trace_input): Fix thinko.
1238 Wed Sep 18 09:54:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1240 * simops.c (exec_bfd): Rename from sim_bfd.
1241 (trace_input): Ditto.
1243 Thu Sep 12 12:03:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1245 * simops.c (trace_input): Use find_nearest_line to print line
1246 number, function name or file name of PC.
1248 Wed Sep 11 16:44:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1250 * simops.c: Add tracing support. Use SEXTxx macros instead of
1251 doing hardwired shifts.
1253 * configure.in (--enable-sim-cflags): Add switch to add additional
1254 flags to simulator buld. If --enable-sim-cflags=trace, turn on
1256 * configure: Regenerate.
1258 * Makefile.in: Don't require a VPATH capable make if configuring
1259 in the same directory. Don't use CFLAGS for configuration flags.
1260 Add flags from --enable-sim-cflags. Support canadian cross
1261 builds. Rebuild whole simulator if include files change.
1263 * interp.c (v850_debug): New global for debugging.
1264 (lookup_hash,sim_size,sim_set_profile): Use
1265 printf_filtered callback, instead of calling printf directly.
1266 (sim_{open,trace}): Enable tracing if -t and compiled for tracing.
1268 * v850_sim.h: Use limits.h to set the various sized types.
1269 (SEXT{5,7,16,22}): New macros.
1271 Mon Sep 9 20:50:46 1996 Jeffrey A Law (law@cygnus.com)
1273 * interp.c (hash): Make this an inline function
1274 when compiling with GCC. Simplify.
1275 * simpos.c: Explicitly include "sys/syscall.h". Remove
1276 some #if 0'd code. Enable more emulated syscalls.
1278 Wed Sep 4 01:48:55 1996 Jeffrey A Law (law@cygnus.com)
1280 * interp.c: Fix sign bit handling for add and sub instructions.
1282 Tue Sep 3 10:20:30 1996 Jeffrey A Law (law@cygnus.com)
1284 * gencode.c: Fix various indention & style problems.
1285 Remove test code. Remove #if 0 code.
1286 * interp.c: Provide prototypes for all static functions.
1287 Fix minor indention problems.
1288 (sim_open, sim_resume): Remove unused variables.
1289 (sim_read): Return type is "int".
1290 * simops.c: Remove unused variables.
1291 (divh): Make result of divide-by-zero zero.
1292 (setf): Initialize result to keep compiler quiet.
1293 (sar instructions): These just clear the overflow bit.
1294 * v850_sim.h: Provide prototypes for put_byte, put_half
1297 * interp.c: OP should be an array of 32bit operands!
1298 (v850_callback): Declare.
1299 (do_format_5): Fix extraction of OP[0].
1300 (sim_size): Remove debugging printf.
1301 (sim_set_callbacks): Do something useful.
1302 (sim_stop_reason): Gross hacks to get c-torture running.
1303 * simops.c: Simplify code for computing targets of bCC
1304 insns. Invert 's' bit if 'ov' bit is set for some
1305 instructions. Fix 'cy' bit handling for numerous
1306 instructions. Make the simulator stop when a halt
1307 instruction is encountered. Very crude support for
1308 emulated syscalls (trap 0).
1309 * v850_sim.h: Include "callback.h" and declare
1310 v850_callback. Items in the operand array are 32bits.
1312 Sun Sep 1 22:35:35 1996 Jeffrey A Law (law@cygnus.com)
1314 * interp.c (sim_resume): Fix code to check for a format 3
1316 * simops.c: bCC insns only argument is a constant, not a
1317 register value (duh...)
1319 Fri Aug 30 10:33:49 1996 Jeffrey A Law (law@cygnus.com)
1321 * simops.c: Fix "not1" and "set1".
1323 * simops.c: Don't forget to initialize temp for
1326 * interp.c: Remove various debugging printfs.
1328 * simops.c: Fix satadd, satsub boundary case handling.
1330 * interp.c (hash): Fix.
1331 * interp.c (do_format_8): Get operands correctly and
1332 call the target function.
1333 * simops.c: Rough cut at "clr1", "not1", "set1", and "tst1".
1335 Thu Aug 29 13:53:29 1996 Jeffrey A Law (law@cygnus.com)
1337 * interp.c (do_format_4): Get operands correctly and
1338 call the target function.
1339 * simops.c: Rough cut at "sld.b", "sld.h", "sld.w", "sst.b",
1340 "sst.h", and "sst.w".
1342 * v850_sim.h: The V850 doesn't have split I&D spaces. Change
1343 accordingly. Remove many unused definitions.
1344 * interp.c: The V850 doesn't have split I&D spaces. Change
1346 (get_longlong, get_longword, get_word): Deleted.
1347 (write_longlong, write_longword, write_word): Deleted.
1348 (get_operands): Deleted.
1349 (get_byte, get_half, get_word): New functions.
1350 (put_byte, put_half, put_word): New functions.
1351 * simops.c: Remove unused functions. Rough cut at
1352 "ld.b", "ld.h", "ld.w", "st.b", "st.h", "st.w" insns.
1354 * v850_sim.h (struct _state): Remove "psw" field. Add
1356 (PSW): Remove bogus definition.
1357 * simops.c: Change condition code handling to use the psw
1358 register within the sregs array. Handle "ldsr" and "stsr".
1360 * simops.c: Handle "satadd", "satsub", "satsubi", "satsubr".
1362 * interp.c (do_format_5): Get operands correctly and
1363 call the target function.
1364 (sim_resume): Don't do a PC update for format 5 instructions.
1365 * simops.c: Handle "jarl" and "jmp" instructions.
1367 * simops.c: Fix minor typos. Handle "cmp", "setf", "tst"
1368 "di", and "ei" instructions correctly.
1370 * interp.c (do_format_3): Get operands correctly and call
1371 the target function.
1372 * simops.c: Handle bCC instructions.
1374 * simops.c: Add condition code handling to shift insns.
1375 Fix minor typos in condition code handling for other insns.
1377 * Makefile.in: Fix typo.
1378 * simops.c: Add condition code handling to "sub" "subr" and
1379 "divh" instructions.
1381 * interp.c (hash): Update to be more accurate.
1382 (lookup_hash): Call hash rather than computing the hash
1384 (do_format_1_2): Handle format 1 and format 2 instructions.
1385 Get operands correctly and call the target function.
1386 (do_format_6): Get operands correctly and call the target
1388 (do_formats_9_10): Rough cut so shift ops will work.
1389 (sim_resume): Tweak to deal with format 1 and format 2
1390 handling in a single funtion. Don't update the PC
1391 for format 3 insns. Fix typos.
1392 * simops.c: Slightly reorganize. Add condition code handling
1393 to "add", "addi", "and", "andi", "or", "ori", "xor", "xori"
1394 and "not" instructions.
1395 * v850_sim.h (reg_t): Registers are 32bits.
1396 (_state): The V850 has 32 general registers. Add a 32bit
1397 psw and pc register too. Add accessor macros
1399 * Makefile.in, interp.c, v850_sim.h: Bring over endianness
1400 changes from the d10v simulator.
1402 * simops.c: Add shift support.
1404 * simops.c: Add multiply & divide support. Abort for system
1407 * simops.c: Add logicals, mov, movhi, movea, add, addi, sub
1408 and subr. No condition codes yet.
1410 Wed Aug 28 13:53:22 1996 Jeffrey A Law (law@cygnus.com)
1412 * ChangeLog, Makefile.in, configure, configure.in, v850_sim.h,
1413 gencode.c, interp.c, simops.c: Created.