1 2002-11-30 Andrew Cagney <cagney@redhat.com>
3 * simops.c: Use int, 1, 0 instead of boolean, true and false.
6 2002-09-27 Jim Wilson <wilson@redhat.com>
8 * simops.c (OP_E6077E0): And op1 with 7 after reading register, not
10 (BIT_CHANGE_OP): Likewise.
12 2002-09-26 Jim Wilson <wilson@redhat.com>
14 * simops (OP_10007E0): Don't subtract 4 from PC.
16 2002-09-19 Nick Clifton <nickc@redhat.com>
18 * interp.c (sim_open): Remove reference to v850ea.
19 (sim_create_inferior): Likewise.
21 * v850.igen: Remove all references to v850ea, including v850ea
22 specific instructions.
24 2002-08-29 Nick Clifton <nickc@redhat.com>
26 From 2001-08-23 Catherine Moore <clm@redhat.com>
28 * Makefile.in: Add gen-zero-r0 option.
29 * sim-main.h (GPR_SET, GPR_CLEAR): Define.
30 * simops.c (OP_24007E0): Sign extend the imm9
31 operand of a mul instruction.
33 2002-06-17 Andrew Cagney <cagney@redhat.com>
35 * simops.c (trace_result): Fix printf formatting.
37 2002-06-16 Andrew Cagney <ac131313@redhat.com>
39 * configure: Regenerated to track ../common/aclocal.m4 changes.
41 2001-12-02 Andrew Cagney <ac131313@redhat.com>
43 * Makefile.in (simops.h, table.c): Delete targets.
44 (tmp-gencode, gencode.o, gencode): Delete targets.
46 ($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
47 * gencode.c: Delete file.
49 2001-04-15 J.T. Conklin <jtc@redback.com>
51 * Makefile.in (simops.o): Add simops.h to dependency list.
53 2001-03-14 Andrew Cagney <ac131313@redhat.com>
55 * Makefile.in (gencode): Link with libintl.
57 2001-01-31 Jonathan Larmour <jlarmour@redhat.com>
59 * Makefile.in (gencode): Link with libopcodes in build tree rather
60 than building source files from there.
62 2000-05-30 Nick Clifton <nickc@cygnus.com>
64 * v850.igen: Remove illegal instruction pattern, since it is the
65 same as the breakpoint pattern.
67 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
69 * configure: Regenerated to track ../common/aclocal.m4 changes.
71 2000-04-14 Gary Thomas <gthomas@redhat.com>
73 * v850.igen: Define 'br *' as illegal since this is the only
74 way to provide a breakpoint on some v850 family processors.
76 2000-03-24 Frank Ch. Eigler <fche@redhat.com>
78 * v850.igen (ilgop): New insn pattern for four-byte breakpoints.
80 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
82 * configure: Regenerated to track ../common/aclocal.m4 changes.
84 1999-05-08 Felix Lee <flee@cygnus.com>
86 * configure: Regenerated to track ../common/aclocal.m4 changes.
88 Tue Dec 1 17:25:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
90 * Makefile.in (NL_TARGET): Define as -DNL_TARGET_v850.
92 Wed Nov 25 17:52:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
94 * Makefile.in (simops.o): Depends on targ-vals.h
95 * simops.c: Include targ-vals.h instead of
96 libgloss/.../syscall.h. Replace SYS_* with TARGET_SYS_*.
97 (divn, divun, OP_1C007E0, OP_18207E0, OP_1C207E0,OP_18007E0):
98 Replace signed long int with signed32.
100 Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com>
102 * interp.c: #include "itable.h".
103 (get_insn_name): New function.
104 (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
105 * sim-main.h (MAX_INSNS,INSN_NAME): Delete.
107 Wed May 6 19:43:27 1998 Doug Evans <devans@canuck.cygnus.com>
109 * sim-main.h (INSN_NAME): New arg `cpu'.
111 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
113 * configure: Regenerated to track ../common/aclocal.m4 changes.
115 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
117 * configure: Regenerated to track ../common/aclocal.m4 changes.
120 Sun Apr 26 15:19:14 1998 Tom Tromey <tromey@cygnus.com>
122 * acconfig.h: New file.
123 * configure.in: Reverted change of Apr 24; use sinclude again.
125 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
127 * configure: Regenerated to track ../common/aclocal.m4 changes.
130 Fri Apr 24 11:18:08 1998 Tom Tromey <tromey@cygnus.com>
132 * configure.in: Don't call sinclude.
134 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
136 * configure: Regenerated to track ../common/aclocal.m4 changes.
137 * sim-main.h (SIM_MAIN_H): Wrap header.
139 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
141 * configure: Regenerated to track ../common/aclocal.m4 changes.
143 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
145 * configure: Regenerated to track ../common/aclocal.m4 changes.
147 Tue Mar 10 15:54:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
149 * interp.c (sim_stop): Delete, second attempt.
151 Thu Feb 26 19:09:47 1998 Andrew Cagney <cagney@b1.cygnus.com>
153 * interp.c (sim_info): Delete.
155 Wed Feb 18 10:47:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
157 * sim-main.h (TRACE_ALU_INPUT*): Delete. Moved to sim-trace.[hc].
159 * simops.c (trace_result): Call trace_generic instead of
161 (trace_module): Change variable type to integer.
162 (trace_input): Initialize trace_module with TRACE_ALU_IDX.
164 * sim-main.h (trace_module): Change variable decl to integer type.
165 (TRACE_BRANCH*, TRACE_LD, TRACE_ST): Update.
167 Tue Feb 17 12:51:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
169 * interp.c (sim_store_register, sim_fetch_register): Pass in
170 length parameter. Return -1.
172 Tue Feb 3 16:24:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
174 * sim-main.h (IMEM16, IMEM16_IMMED): Rename IMEM and
175 IMEM_IMMED. To match recent igen change.
177 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
179 * configure: Regenerated to track ../common/aclocal.m4 changes.
181 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
183 * configure: Regenerated to track ../common/aclocal.m4 changes.
185 Fri Jan 30 09:51:27 1998 Andrew Cagney <cagney@b1.cygnus.com>
187 * sim-main.h (CPU_CIA): Delete, replaced by.
188 (CIA_SET, CIA_SET): Define.
190 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
192 * configure: Regenerated to track ../common/aclocal.m4 changes.
194 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
196 * configure: Regenerated to track ../common/aclocal.m4 changes.
199 Fri Dec 5 09:26:08 1997 Nick Clifton <nickc@cygnus.com>
201 * v850.igen: Revert break value back to its old value.
203 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
205 * configure: Regenerated to track ../common/aclocal.m4 changes.
207 Wed Dec 3 17:27:19 1997 Nick Clifton <nickc@cygnus.com>
209 * v850.igen: Make break have a zero first field, since otherwise
210 it clashes with the DIVH instruction.
212 Sat Nov 22 21:32:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
214 * simops.c (OP_10007E0): Rename SIGABRT -> SIM_SIGABRT. Give
215 sim_stopped instead of sim_signalled.
217 * v850.igen (BREAK), simops.c (OP_12007E0): Rename SIGTRAP to
219 (illegal): Rename SIGILL to SIM_SIGILL.
221 * sim-main.h, simops.c, interp.c: Do not include signal.h.
223 * sim-main.h: Include sim-signal.h instead of signal.h.
224 (SIGTRAP, SIGQUIT): Delete definition.
225 (SIG_V850_EXIT): Delete definition.
227 Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com>
229 * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS).
231 Fri Oct 31 10:33:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
233 * interp.c (sim_open): Check state magic number.
234 (sim-assert.h): Include.
236 Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
238 * v850.igen: Add model filter field to records.
240 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
242 * configure: Regenerated to track ../common/aclocal.m4 changes.
244 Fri Sep 26 11:56:02 1997 Felix Lee <flee@cygnus.com>
246 * sim-main.h: delete null override of SIM_ENGINE_HALT_HOOK and
247 SIM_ENGINE_RESTART_HOOK.
249 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
251 * configure: Regenerated to track ../common/aclocal.m4 changes.
253 Wed Sep 24 17:28:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
255 * sim-main.h (WITH_TARGET_WORD_MSB): Delete.
257 * configure.in (SIM_AC_OPTION_BITSIZE): Specify 32 bit
258 architecture with MSB == 31.
260 Wed Sep 24 14:04:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
262 * v850.igen: Make divh insn with RRRRR==0 breakpoint.
264 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
266 * configure: Regenerated to track ../common/aclocal.m4 changes.
268 Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
270 * Makefile.in (SIM_WARNINGS, SIM_ALIGNMENT, SIM_ENDIAN,
271 SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common.
272 (SIM_EXTRA_CFLAGS): Update.
274 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
276 * configure: Regenerated to track ../common/aclocal.m4 changes.
277 * configure.in: Really specify NONSTRICT_ALIGNMENT as the default.
279 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
281 * configure.in: Specify NONSTRICT_ALIGNMENT as the default.
282 * configure: Regenerated to track ../common/aclocal.m4 changes.
284 Fri Sep 19 10:37:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
286 * v850.igen (disp16): Use EXTEND16 to sign extend disp.
287 (disp22): Only shift left by 1, not 2.
288 ("jmp"): Ensure PC is 2 byte aligned.
290 * simops.c, v850.igen: Move "Bcond", "jr", "jarl" code to
291 v850.igen. Fix tracing.
293 * simops.c (OP_300, OP_400, OP_500): Move "sdl.b", "sld.h",
294 "sld.w" insns to v850.igen. Fix tracing.
295 (OP_70): Ditto for "sld.hu".
297 * v850.igen: Clarify tracing of "sld.b", "sld.h" et.al.
299 * simops.c (condition_met): Make global.
301 * sim-main.h (TRACE_ALU_INPUT3, TRACE_BRANCH0, TRACE_LD,
303 (TRACE_LD_NAME): Define.
305 * simops.c: Move "cmov", "cmov imm" to v850.igen, fix.
307 Wed Sep 17 16:21:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
309 * simops.c: Move "mov", "reti", to v850.igen, fix tracing.
311 * interp.c (hash): Delete.
313 * v850.igen (nop): Really do nothing.
315 * interp.c (do_interrupt): Mask interrupts after PSW is saved, not
317 * v850.igen (reti): Return to current PC not previous.
319 Wed Sep 17 14:02:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
321 * simops.c: Move "ctret", "bsw", "hsw" to v850.igen, fix tracing.
322 (trace_module): Global, save component/module name across insn.
324 * simops.c: Move "bsh" to v850.igen, fix.
326 * v850.igen (callt): Load correct number of bytes. Fix tracing.
327 (stsr, ldsr): Correct src, dest fields. Fix tracing.
328 (ctret): Force alignment. Fix tracing.
330 Tue Sep 16 22:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
332 * simops.c (trace_output): Add result argument.
333 (trace_result): New function. Simpler version of trace_output,
334 assumes trace needed.
335 (trace_output): Call trace_result.
336 (trace_output): For IMM_REG_REG, trace correct register.
337 (trace_input): Add case for 16bit immediates.
338 (OP_600, OP_640, OP_680, OP_6C0, OP_6A0): Use.
340 * sim-main.h (TRACE_ALU_INPUT, TRACE_ALU_RESULT): Define.
341 (trace_values, trace_name, trace_pc, trace_num_values): Make
345 v850.insn (movea, stsr): Use.
346 (sxb, sxh, zxb, zxh): Ditto.
348 Tue Sep 16 21:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
350 * simops.c: Move "movea" from here.
351 * v850.igen: To here.
353 * v850.igen (simm16): Define, sign extend imm16.
354 (uimm16): Define, no sign extension.
355 (addi, andi, movea, movhi, mulhi, ori, satsubi, xori): Use.
357 * simops.c: Move "sxh", "switch", "sxb", "callt", "dispose",
359 * v850.igen: To here.
360 (switch): Fix off by two error in NIA calc.
362 Tue Sep 16 15:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
364 * simops.c (trace_pc, trace_name, trace_values, trace_num_values):
366 (trace_input): Just save pc, name and values for trace_output.
367 (trace_output): Write trace values to a buffer. Use
368 trace_one_insn to print trace info and buffer.
369 (SIZE_OPERANDS, SIZE_LOCATION): Delete.
371 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
373 * sim-main.h (struct _sim_cpu): Add psw_mask so that reserved bits
376 * simops.c (OP_2007E0, OP_4007E0): Move "ldsr", "stsr"
377 instructions from here.
378 * v850.igen (ldsr, stsr): To here. Mask out reserved bits when
381 * interp.c (sim_open): Set psw_mask if machine known.
383 Tue Sep 16 10:20:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
385 * v850-dc: Add rule to diferentiate between breakpoint and divh.
386 * v850.igen (break): New instruction, breakpoint simulator.
387 * v850.igen (breakpoint): Enable. Change to a 32bit instruction.
389 Mon Sep 15 18:44:05 1997 Jim Wilson <wilson@cygnus.com>
391 * simops.c (Multiply64): Don't store into register zero.
393 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
395 * Makefile.in (semantics.o): Add dependency.
397 * sim-main.h (SAVE_1, SAVE_2): Perform backward compatible save,
398 do not adjust CIA/NIA.
400 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
402 * simops.c (OP_300, OP_400, OP_70): Make behavour depend on PSW[US].
404 * simops.c: Move "divun", "sld.bu", "divhn", "divhun", "divn",
405 "divun", "pushml" code from here to v850.igen.
406 (divun): Make global.
407 (type3_regs): Make global
409 * v850.igen: Move simops.c code to here.
411 * interp.c (sim_create_inferior): For v850eq set US bit by
414 * interp.c (sim_open): Don't set arch, now set by
417 * configure: Regenerated to track ../common/aclocal.m4 changes.
419 Mon Sep 15 14:39:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
421 * simops.c (op_types): Move from here.
424 * sim-main.h (trace_input, trace_output), simops.c: Make global.
426 * simops.c (OP_60): Move "jmp" code from here.
427 * v850.igen (jmp): To here.
429 * simops.c (OP_60): Move "sld.bu" code from here.
430 * v850.igen (sld.bu): To here.
432 Fri Sep 12 15:11:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
434 * v850.igen (prepare, ...): Add to v850eq architecture.
436 * interp.c (sim_open): Default to v850eq.
438 * interp.c (sim_open): Default to v850e.
439 * sim-main.h (signal.h): Include.
441 * v850.igen (illegal): Report/halt illegal instructions.
443 * Makefile.in (SIM_EXTRA_CFLAGS): Add SIM_RESERVED_BITS.
445 * configure.in: Add reserved bits option.
446 * configure: Regenerate.
448 Thu Sep 11 08:40:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
450 * interp.c (sim_open): Use sim_do_commandf instead of asprintf.
452 * sim-main.h (INSN_NAME):
454 * Makefile.in (INCLUDE): Add SIM_EXTRA_DEPS.
455 (SIM_EXTRA_DEPS): Add itable.h
456 (tmp-gencode): Does not depend on simops.h
458 * sim-main.h (itable.h): Include.
459 (MAX_INSNS, INSN_NAME): Define.
461 * interp.c: Compute inttype from the interrupt_names index that
464 Wed Sep 10 10:25:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
466 * simops.c (trace_input): Use trace_printf instead of
468 (trace_output): Ditto.
469 (trace_input): Only trace when TRACE_ALU_P. Delete code
470 disasembling instruction.
471 (trace_output): Only trace when TRACE_ALU_P.
473 Tue Sep 9 01:29:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
475 * simops.c (trace_input, trace_output): Use sim_io_printf.
476 (OP_620): Pass correct argument to trace.
478 (trace_input): Obtain prog_bfd, text_start et.al from simulator
481 Mon Sep 8 21:03:52 1997 Andrew Cagney <cagney@b1.cygnus.com>
483 * v850.igen: New file.
486 Mon Sep 8 18:33:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
489 * sim-main.h (SEXT16): Delete, use EXTEND16.
490 (SEXT8): Delete, use EXTEND8.
491 (SEXT32): Delete, used?
492 (SEXT40, SEXT44, SEXT64): Use UNSIGNED64 for constants, not ...LL.
493 (WITH_TARGET_WORD_MSB): Define as 31. v850 little bit endian.
495 * simops.c: Use EXTEND15 from sim-bits instead of SEXT16.
497 * sim-main.h (DEBUG_TRACE, DEBUG_VALUES, v850_debug): Delete,
498 replace with TRACE_INSN_P and TRACE_ALU_P.
500 * simops.c (trace_input, trace_output): Update.
502 * interp.c (sim_engine_run): Delete.
503 (lookup_hash): Delete.
504 (sim_open): Do not fill hash table.
507 Fri Sep 5 17:04:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
509 * simops.c (OP_FFFF): Use sim_engine_halt.
513 * sim-main.h (struct sim_cpu): Delete member exception. Using
516 * interp.c (sim_info): Do not do anything in sim-info.
517 (sim_stop): Delete, replace with sim-stop.
518 (sim_stop_reason): Delete, replace with sim-reason.
520 * sim-main.h (WITH_WATCHPOINTS): Define.
521 (WITH_MODULO_MEMORY): Define
523 * Makefile.in (SIM_OBJS): Add sim-resume, sim-watch, sim-stop,
526 * interp.c (enum interrupt_cond_type): Delete.
527 (struct interrupt_generator): Delete.
528 (enum interrupt_type): Drop int_none.
529 (sim_open): Initialize WATCHPOINT module.
530 (sim_resume, sim_run): Rename sim_resume to sim_run.
531 (sim_engine_run): Replace interrupt code with call to sim-events.
532 (sim_set_interrupt): Delete.
533 (sim_parse_number): Delete.
535 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
537 * configure: Regenerated to track ../common/aclocal.m4 changes.
539 Thu Sep 4 18:11:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
541 * simops.c (fetch_argv): New function, fetch a arg vector from
544 * configure.in: Check for fork, execve, execv.
545 * configure: Regenerate.
547 * interp.c (sim_store_register, sim_fetch_register): Use H2T_4 and
548 T2H_4 for byte swapping.
550 * sim-main.h, interp.c (get_word, get_half, get_byte, put_word,
551 put_half, put_byte): Delete.
553 * Makefile.in (SIM_OBJS): Add sim-memopt.o module.
555 * sim-main.h (load_mem, store_mem): Redefine as macros.
556 (IMEM, IMEM_IMMED): New macros - fetch instructions.
558 * simops.c (OP_10007E0): For SYS_read, SYS_write, SYS_open
559 transfer data via a buffer.
560 (fetch_str): New function, fetch string from memory.
562 * Makefile.in (SIM_OBJS): Add sim-hrw.o module.
564 * interp.c (sim_open): Establish memory maps using sim-memopt.c
566 (sim_do_command): Print error if memory-map command is used. Call
568 (map): Delete, replaced by sim-core.
569 (sim_memory_init): Delete, replaced by sim-core.
570 (sim_set_memory_map): Delete, replaced by sim-memopt.
571 (load_mem): Delete, replaced by sim-core.
572 (store_mem): Delete, replaced by sim-core.
573 (sim_write): Delete, replaced by sim-hrw.
574 (sim_read): Delete, replaced by sim-hrw.
576 * sim-main.h (struct sim_state): Remove memory members, using
579 Wed Sep 3 10:18:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
581 * sim-main.h: Replace SIM_HAVE_FLATMEM with mem ptr.
582 * interp.c (map): Do not add to a void pointer.
584 * Makefile.in (INCLUDE): Add sim-main.h
586 * configure.in: Check for time.h
587 * configure: Re-generate.
589 * interp.c (struct interrupt_generator): Make time unsigned long,
591 (sim_resume): Make oldpc SIM_ADDR.
592 (struct hash_entry): Make mask/opcode unsigned.
594 * v850_sim.h (struct simops ): Make opcode and mask unsigned.
596 * simops.c (utime.h): Include if available.
597 (OP_10007E0): Check for UTIME function.
598 (divun): Put parentheses around shift argument.
599 (OP_640): Put parentheses around shift argument, was wrong.
600 (OP_107F0): Return something.
602 * interp.c (sim_parse_number): Use strtoul not strtol.
603 (sim_resume): Use sim_elapsed_time_get to keep track of the time.
605 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
606 (SIM_AC_OPTION_ENDIAN): Set to hardwired big.
607 (SIM_AC_OPTION_HOST_ENDIAN): Add.
608 (AC_CHECK_FUNCS): Add utime.
609 (AC_CHECK_HEADERS): Add stdlib.h, string.h, strings.h, utime.h
610 configure: Regenerate.
613 * Makefile.in (SIM_RUN_OBJS): Use nrun.o.
614 (SIM_OBJS): Add sim-io.o, sim-hload.o, sim-utils.o, sim-options.o,
615 sim-config.o, sim-module.o, sim-events.o, sim-core.o,
616 sim-endian.o, sim-engine.o, sim-trace.o, sim-profile.o
617 (SIM_ENDIAN, SIM_WARNGINS): Define.
619 * simops.c (OP_10007E0): Use sim_io_* for transfers.
621 * interp.c (sim_resume): Pass sd around.
623 * simops.c (sim-main.h): Include.
625 * gencode.c (write_template): Generate #include sim-main.h.
626 (write_opcodes): Ditto.
628 * interp.c (prog_bfd, prog_bfd_was_opened_p): Delete.
629 (v850_callback): Ditto.
630 (sim_kind, myname): Ditto.
631 (lookup_hash): Pass SD. Use sim_io_error.
632 (sim_set_memory_map): Pass in SD, use.
633 (init_system): Pass in SD, use.
635 (sim_set_profile): Delete.
636 (sim_set_profile_size): Delete.
637 (do_interrupt): Pass in SD, use.
638 (sim_info): Use sim_io_printf.
639 (sim_create_inferior): Reset registers. Set PC from prog_bfd
641 (sim_load): Delete, use common/sim-hload.c
642 (sim_size): Rename to sim_memory_init.
643 (sim_write): Remove call to init_system.
644 (init_system): Delete.
645 (sim_set_callbacks): Delete.
646 (sim_set_interrupt): Pass in SD, use.
647 (start_time): Delete.
649 * v850_sim.h: Remove everything except `struct simops' from here.
650 * sim-main.h: Move most to here.
651 * gencode.c: Move #includes to here.
653 * sim-main.h(struct _sim_cpu): Rename struct _state.
654 (#define PC, et.al.): Update
655 (v850_callback): Delete. Replaced with SIM_DESC arg.
656 (int8, uint8, int16, uint16, int32, uint32): Define types using
657 unsigned8 et.al from common/sim-types.h.
658 * sim-main.h (State): Define as STATE_CPU.
660 Mon Sep 1 12:07:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
662 * configure.in: Check for time, chmod.
663 * configure: Regenerate.
664 * simops.c (SYS_time, SYS_chmod): Use HAVE_TIME, HAVE_CHMOD.
666 * simops.c (../../libgloss/v850/sys/syscall.h): Include instead of
668 (OP_10007E0): Check the existance each SYS_* macro independantly.
670 * v850_sim.h (SIGQUIT, SIGTRAP): Only define if missing.
672 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
674 * configure: Regenerated to track ../common/aclocal.m4 changes.
677 Tue Aug 26 10:42:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
679 * interp.c (sim_kill): Delete.
680 (sim_create_inferior): Add ABFD argument.
681 (sim_load): Move setting of PC from here.
682 (sim_create_inferior): To here.
684 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
686 * configure: Regenerated to track ../common/aclocal.m4 changes.
689 Mon Aug 25 11:31:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
691 * interp.c (sim_open): Add ABFD argument.
693 Fri Aug 22 10:39:28 1997 Nick Clifton <nickc@cygnus.com>
695 * simops.c (bsh): Only set CY flag if either of the bottom
698 * simops.c (prepare, dispose): Lower numbered
699 registers go to higher numbered address.
701 * simops.c (unsigned divide instructions): S bit set if result has
704 * simops.c (pushml, pushmh, popml, popmh): Lower numbered
705 registers go to higher numbered address.
707 Wed Aug 20 13:56:35 1997 Nick Clifton <nickc@cygnus.com>
709 * simops.c (OP_107E0, OP_107F0, OP_307E0, OP_307F0): Use correct
710 interpretation of SR bit in list18 structure.
711 (divn, divun): New functions to perform N step divide functions.
713 Mon Aug 18 10:59:02 1997 Nick Clifton <nickc@cygnus.com>
715 * simops.c (OP_300, OP_400, OP_60, OP_70): Support variant opcodes
716 with US bit set in the PSW.
718 Wed Aug 13 19:06:55 1997 Nick Clifton <nickc@cygnus.com>
720 * interp.c (sim_resume): Opcode functions return amount to be
721 added to PC and all opcodes take a standard format in the OP[]
724 (do_format_*): Functions removed.
726 * v850_sim.h (SP, EP): New register mnemonics.
728 * gencode.c (write_header): Functions prototypes return an
731 * simops.c: Opcode functions return amount to be added to PC.
733 * v850_sim.h (CTPC, CTPSW, CTBP): New register mnemonics.
735 * simops.c: Add support for v850e instructions.
737 * simops.c: Add support for v850eq instructions.
739 Tue May 20 10:24:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
741 * interp.c (sim_open): Add callback argument.
742 (sim_set_callbacks): Delete SIM_DESC argument.
744 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
746 * configure: Regenerated to track ../common/aclocal.m4 changes.
748 Wed Apr 23 17:20:16 1997 Doug Evans <dje@canuck.cygnus.com>
750 * interp.c (prog_bfd_was_opened_p): New static local.
751 (prog_bfd): New global variable.
752 (sim_open): Undo patch to add -E support.
753 (sim_close): Close prog_bfd if sim_load opened it.
754 (sim_load): Record bfd of loaded file in prog_bfd.
755 * simops.c (prog_bfd): Renamed from exec_bfd.
757 Fri Apr 18 14:17:12 1997 Andrew Cagney <cagney@b1.cygnus.com>
759 * interp.c (sim_stop): Stub function.
761 Thu Apr 17 03:53:18 1997 Doug Evans <dje@canuck.cygnus.com>
763 * Makefile.in (SIM_OBJS): Add sim-load.o.
764 * interp.c (sim_kind, myname): New static locals.
765 (sim_open): Set sim_kind, myname. Ignore -E arg.
766 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
767 load file into simulator. Set start address from bfd.
768 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
770 Wed Apr 16 19:53:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
772 * simops.c (OP_10007E0): Only provide system calls SYS_execv,
773 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
775 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
777 * configure: Regenerated to track ../common/aclocal.m4 changes.
780 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
782 * interp.c (sim_open): New arg `kind'.
784 * configure: Regenerated to track ../common/aclocal.m4 changes.
786 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
788 * configure: Regenerated to track ../common/aclocal.m4 changes.
790 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
792 * configure: Regenerated to track ../common/aclocal.m4 changes.
794 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
796 * configure: Re-generate.
798 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
800 * configure: Regenerate to track ../common/aclocal.m4 changes.
802 Thu Mar 13 13:00:54 1997 Doug Evans <dje@canuck.cygnus.com>
804 * interp.c (sim_open): New SIM_DESC result. Argument is now
806 (other sim_*): New SIM_DESC argument.
808 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
810 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
811 COMMON_{PRE,POST}_CONFIG_FRAG instead.
812 * configure.in: sinclude ../common/aclocal.m4.
813 * configure: Regenerated.
815 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
817 * configure configure.in Makefile.in: Update to new configure
818 scheme which is more compatible with WinGDB builds.
819 * configure.in: Improve comment on how to run autoconf.
820 * configure: Re-run autoconf to get new ../common/aclocal.m4.
821 * Makefile.in: Use autoconf substitution to install common
824 Mon Jan 20 16:05:34 1997 Michael Meissner <meissner@tiktok.cygnus.com>
826 * simops.c (OP_{E0,2E0,6E0}): The multiply operations sign extend,
829 Tue Jan 14 17:06:03 1997 Stu Grossman (grossman@critters.cygnus.com)
831 * simops.c: Put ifdefs around things to make MSVC happy. Get rid
832 of unistd.h. Disable SYS_stat, SYS_chown, SYS_time, SYS_times,
833 SYS_gettimeofday and SYS_utime from MSVC.
835 Tue Dec 31 18:11:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
837 * simops.c (OP_10007E0): Know that kill encodes the signal number
838 via: 0xdead0000 | signal and turn it back into a signal.
840 Fri Dec 27 14:44:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
842 * v850_sim.h (SIG_V850_EXIT): Define as -1.
844 * interp.c (sim_open): Cast calloc function.
845 (sim_stop_reason): If signal is SIG_V850_EXIT, inform gdb the
846 program exited with the appropriate exit code.
847 (sim_set_interrupt): Declare buildargv.
849 * simops.c (OP_10007E0): Make exit signal normal exit. Make time
850 type correct and work on big endian systems.
852 Wed Nov 20 02:18:44 1996 Doug Evans <dje@canuck.cygnus.com>
854 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
855 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
856 * configure.in: Simplify using macros in ../common/aclocal.m4.
857 Call AC_CHECK_HEADERS(unistd.h).
858 * configure: Regenerated.
859 * config.in: New file.
860 * simops.c: #include "config.h". #include <unistd.h> if present.
862 Sun Nov 3 23:02:54 1996 Stan Shebs <shebs@andros.cygnus.com>
864 * v850_sim.h (State): New slots dummy_mem, pending_nmi.
865 (EIPC, etc): New macros for system registers.
866 * simops.c, interp.c: Use everywhere.
868 * interp.c: Add support for interrupts issued by interrupt
869 generators, either PC- or time-based. Controlled by simulator
870 command "sim interrupt".
872 * interp.c: Add support for variable-size allocation of memory,
873 via simulator command "sim memory-map".
874 (map): Issue SIGSEGV for references to invalid memory regions.
876 Thu Oct 31 14:44:10 1996 Gavin Koch <gavin@cygnus.com>
878 * simops.c: Include <sys/time.h> for struct timeval and
881 Wed Oct 30 08:49:10 1996 Jeffrey A Law (law@cygnus.com)
883 * simops.c (OP_10007E0): Handle SYS_times and SYS_gettimeofday.
885 * simops.c (OP_10007E0): Handle SYS_time.
887 Tue Oct 29 14:22:55 1996 Jeffrey A Law (law@cygnus.com)
889 * simops.c: Include <sys/stat.h>.
890 (OP_10007E0): Handle SYS_stat.
892 Thu Oct 24 12:26:35 1996 Jeffrey A Law (law@cygnus.com)
894 * simops.c (OP_10007E0): Don't declare errno.
896 * simops.c (OP_500): Mask off low bit in displacement
900 * simops.c (OP_500): Fix displacement handling for sld.w.
901 (OP_501): Similarly for sst.w.
903 * simops.c (trace_input): Remove all references to SEXT7.
904 (OP_300, OP_400, OP_500, OP_380, OP_480, OP_501): Displacement
905 is zero extended for sst/sld instructions.
906 * v850_sim.h (SEX7): Delete. It's no longer needed (and it
907 was incorrect anyway).
909 Thu Oct 24 10:33:33 1996 Stu Grossman (grossman@critters.cygnus.com)
911 * Makefile.in: Get rid of srcroot. Set all INSTALL macros via
913 * gencode.c (write_opcodes): Pad operands field to account for
915 * simops.c: Include errno.h. Exclude SYS_chown, since MSVC
916 doesn't support it. (Why is this here in the first place?!?)
917 * v850_sim.h: Get rid of 64 bit defs. Also, get rid of #elif's.
918 Change number of operands in struct simops from 9 to 6. Define
919 SIGTRAP and SIGQUIT for MSVC.
921 Tue Oct 15 16:19:51 1996 Stu Grossman (grossman@critters.cygnus.com)
923 * interp.c (MEM_SIZE): It's now bytes, not a power of 2.
924 * (map): Add support for external mem in the 1->2 meg range.
925 Also, abort() when memory access is way out of bounds. (Better to
926 die than to give wrong result. (This will be fixed later.))
927 * (sim_size): MEM_SIZE is now bytes, not shift factor.
929 Tue Oct 1 15:53:24 1996 Gavin Koch <gavin@cygnus.com>
931 * simops.c (trace_input): Swapped order of operands for output
932 output of OP_IMM_REG. Changed the fetching of the operands for
933 OP_LOAD32, and OP_STORE32 to work like op-function.
935 Mon Sep 30 15:46:33 1996 Stu Grossman (grossman@critters.cygnus.com)
937 * interp.c: Move includes of remote-sim.h and callback.h to
939 * (lookup_hash): Add PC to report of hash failure.
940 * (map load_mem store_mem): New memory subsystem. Models V851
942 * (sim_write sim_read): Use new memory subsystem.
943 * (sim_resume): Don't load and save PC into EIPC anymore. Needed
944 to make user-defined traps work right.
945 * simops.c (OP_*): Use new memory subsystem.
946 * (OP_14007E0 (reti)): Implement reti.
947 * (OP_14996E0 (trap)): Implement user-defined traps. Move I/O to
948 trap 31. Use new memory subsystem.
949 * v850_sim.h: Prototypes for load_mem, store_mem and map. Use
950 load_mem in RLW macro.
952 Fri Sep 27 18:34:09 1996 Stu Grossman (grossman@critters.cygnus.com)
954 * gencode.c (write_opcodes): Output hex values for opcode mask
956 * interp.c (sim_resume): Save and restore PC from the appropriate
958 * (sim_fetch_register sim_store_register): Fix byte-order problem
959 with reading and writing registers.
960 * simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
962 Fri Sep 27 17:42:37 1996 Jeffrey A Law (law@cygnus.com)
964 * simops.c (trace_input): Fix thinko.
966 Wed Sep 18 09:54:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
968 * simops.c (exec_bfd): Rename from sim_bfd.
969 (trace_input): Ditto.
971 Thu Sep 12 12:03:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
973 * simops.c (trace_input): Use find_nearest_line to print line
974 number, function name or file name of PC.
976 Wed Sep 11 16:44:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
978 * simops.c: Add tracing support. Use SEXTxx macros instead of
979 doing hardwired shifts.
981 * configure.in (--enable-sim-cflags): Add switch to add additional
982 flags to simulator buld. If --enable-sim-cflags=trace, turn on
984 * configure: Regenerate.
986 * Makefile.in: Don't require a VPATH capable make if configuring
987 in the same directory. Don't use CFLAGS for configuration flags.
988 Add flags from --enable-sim-cflags. Support canadian cross
989 builds. Rebuild whole simulator if include files change.
991 * interp.c (v850_debug): New global for debugging.
992 (lookup_hash,sim_size,sim_set_profile): Use
993 printf_filtered callback, instead of calling printf directly.
994 (sim_{open,trace}): Enable tracing if -t and compiled for tracing.
996 * v850_sim.h: Use limits.h to set the various sized types.
997 (SEXT{5,7,16,22}): New macros.
999 Mon Sep 9 20:50:46 1996 Jeffrey A Law (law@cygnus.com)
1001 * interp.c (hash): Make this an inline function
1002 when compiling with GCC. Simplify.
1003 * simpos.c: Explicitly include "sys/syscall.h". Remove
1004 some #if 0'd code. Enable more emulated syscalls.
1006 Wed Sep 4 01:48:55 1996 Jeffrey A Law (law@cygnus.com)
1008 * interp.c: Fix sign bit handling for add and sub instructions.
1010 Tue Sep 3 10:20:30 1996 Jeffrey A Law (law@cygnus.com)
1012 * gencode.c: Fix various indention & style problems.
1013 Remove test code. Remove #if 0 code.
1014 * interp.c: Provide prototypes for all static functions.
1015 Fix minor indention problems.
1016 (sim_open, sim_resume): Remove unused variables.
1017 (sim_read): Return type is "int".
1018 * simops.c: Remove unused variables.
1019 (divh): Make result of divide-by-zero zero.
1020 (setf): Initialize result to keep compiler quiet.
1021 (sar instructions): These just clear the overflow bit.
1022 * v850_sim.h: Provide prototypes for put_byte, put_half
1025 * interp.c: OP should be an array of 32bit operands!
1026 (v850_callback): Declare.
1027 (do_format_5): Fix extraction of OP[0].
1028 (sim_size): Remove debugging printf.
1029 (sim_set_callbacks): Do something useful.
1030 (sim_stop_reason): Gross hacks to get c-torture running.
1031 * simops.c: Simplify code for computing targets of bCC
1032 insns. Invert 's' bit if 'ov' bit is set for some
1033 instructions. Fix 'cy' bit handling for numerous
1034 instructions. Make the simulator stop when a halt
1035 instruction is encountered. Very crude support for
1036 emulated syscalls (trap 0).
1037 * v850_sim.h: Include "callback.h" and declare
1038 v850_callback. Items in the operand array are 32bits.
1040 Sun Sep 1 22:35:35 1996 Jeffrey A Law (law@cygnus.com)
1042 * interp.c (sim_resume): Fix code to check for a format 3
1044 * simops.c: bCC insns only argument is a constant, not a
1045 register value (duh...)
1047 Fri Aug 30 10:33:49 1996 Jeffrey A Law (law@cygnus.com)
1049 * simops.c: Fix "not1" and "set1".
1051 * simops.c: Don't forget to initialize temp for
1054 * interp.c: Remove various debugging printfs.
1056 * simops.c: Fix satadd, satsub boundary case handling.
1058 * interp.c (hash): Fix.
1059 * interp.c (do_format_8): Get operands correctly and
1060 call the target function.
1061 * simops.c: Rough cut at "clr1", "not1", "set1", and "tst1".
1063 Thu Aug 29 13:53:29 1996 Jeffrey A Law (law@cygnus.com)
1065 * interp.c (do_format_4): Get operands correctly and
1066 call the target function.
1067 * simops.c: Rough cut at "sld.b", "sld.h", "sld.w", "sst.b",
1068 "sst.h", and "sst.w".
1070 * v850_sim.h: The V850 doesn't have split I&D spaces. Change
1071 accordingly. Remove many unused definitions.
1072 * interp.c: The V850 doesn't have split I&D spaces. Change
1074 (get_longlong, get_longword, get_word): Deleted.
1075 (write_longlong, write_longword, write_word): Deleted.
1076 (get_operands): Deleted.
1077 (get_byte, get_half, get_word): New functions.
1078 (put_byte, put_half, put_word): New functions.
1079 * simops.c: Remove unused functions. Rough cut at
1080 "ld.b", "ld.h", "ld.w", "st.b", "st.h", "st.w" insns.
1082 * v850_sim.h (struct _state): Remove "psw" field. Add
1084 (PSW): Remove bogus definition.
1085 * simops.c: Change condition code handling to use the psw
1086 register within the sregs array. Handle "ldsr" and "stsr".
1088 * simops.c: Handle "satadd", "satsub", "satsubi", "satsubr".
1090 * interp.c (do_format_5): Get operands correctly and
1091 call the target function.
1092 (sim_resume): Don't do a PC update for format 5 instructions.
1093 * simops.c: Handle "jarl" and "jmp" instructions.
1095 * simops.c: Fix minor typos. Handle "cmp", "setf", "tst"
1096 "di", and "ei" instructions correctly.
1098 * interp.c (do_format_3): Get operands correctly and call
1099 the target function.
1100 * simops.c: Handle bCC instructions.
1102 * simops.c: Add condition code handling to shift insns.
1103 Fix minor typos in condition code handling for other insns.
1105 * Makefile.in: Fix typo.
1106 * simops.c: Add condition code handling to "sub" "subr" and
1107 "divh" instructions.
1109 * interp.c (hash): Update to be more accurate.
1110 (lookup_hash): Call hash rather than computing the hash
1112 (do_format_1_2): Handle format 1 and format 2 instructions.
1113 Get operands correctly and call the target function.
1114 (do_format_6): Get operands correctly and call the target
1116 (do_formats_9_10): Rough cut so shift ops will work.
1117 (sim_resume): Tweak to deal with format 1 and format 2
1118 handling in a single funtion. Don't update the PC
1119 for format 3 insns. Fix typos.
1120 * simops.c: Slightly reorganize. Add condition code handling
1121 to "add", "addi", "and", "andi", "or", "ori", "xor", "xori"
1122 and "not" instructions.
1123 * v850_sim.h (reg_t): Registers are 32bits.
1124 (_state): The V850 has 32 general registers. Add a 32bit
1125 psw and pc register too. Add accessor macros
1127 * Makefile.in, interp.c, v850_sim.h: Bring over endianness
1128 changes from the d10v simulator.
1130 * simops.c: Add shift support.
1132 * simops.c: Add multiply & divide support. Abort for system
1135 * simops.c: Add logicals, mov, movhi, movea, add, addi, sub
1136 and subr. No condition codes yet.
1138 Wed Aug 28 13:53:22 1996 Jeffrey A Law (law@cygnus.com)
1140 * ChangeLog, Makefile.in, configure, configure.in, v850_sim.h,
1141 gencode.c, interp.c, simops.c: Created.