1 2016-01-10 Mike Frysinger <vapier@gentoo.org>
3 * config.in, configure: Regenerate.
5 2016-01-10 Mike Frysinger <vapier@gentoo.org>
7 * configure: Regenerate.
9 2016-01-10 Mike Frysinger <vapier@gentoo.org>
11 * configure: Regenerate.
13 2016-01-10 Mike Frysinger <vapier@gentoo.org>
15 * configure: Regenerate.
17 2016-01-10 Mike Frysinger <vapier@gentoo.org>
19 * configure: Regenerate.
21 2016-01-10 Mike Frysinger <vapier@gentoo.org>
23 * configure: Regenerate.
25 2016-01-10 Mike Frysinger <vapier@gentoo.org>
27 * configure: Regenerate.
29 2016-01-10 Mike Frysinger <vapier@gentoo.org>
31 * configure: Regenerate.
33 2016-01-09 Mike Frysinger <vapier@gentoo.org>
35 * config.in, configure: Regenerate.
37 2016-01-06 Mike Frysinger <vapier@gentoo.org>
39 * interp.c (sim_open): Mark argv const.
40 (sim_create_inferior): Mark argv and env const.
42 2016-01-04 Mike Frysinger <vapier@gentoo.org>
44 * configure: Regenerate.
46 2016-01-03 Mike Frysinger <vapier@gentoo.org>
48 * interp.c (sim_open): Update sim_parse_args comment.
50 2016-01-03 Mike Frysinger <vapier@gentoo.org>
52 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
53 * configure: Regenerate.
55 2016-01-02 Mike Frysinger <vapier@gentoo.org>
57 * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
59 * configure: Regenerate.
61 2015-12-30 Mike Frysinger <vapier@gentoo.org>
63 * wrapper.c (v850_reg_store, v850_reg_fetch): Define.
64 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
65 (sim_store_register): Rename to ...
66 (v850_reg_store): ... this.
67 (sim_fetch_register): Rename to ...
68 (v850_reg_fetch): ... this.
70 2015-12-27 Mike Frysinger <vapier@gentoo.org>
72 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
74 2015-12-26 Mike Frysinger <vapier@gentoo.org>
76 * config.in, configure: Regenerate.
78 2015-12-24 Mike Frysinger <vapier@gentoo.org>
80 * sim-main.h (WITH_WATCHPOINTS): Delete.
82 2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com>
84 * simops.c (v850_bins): Fix left shift of negative value.
86 2015-11-17 Mike Frysinger <vapier@gentoo.org>
88 * sim-main.h (WITH_CORE): Delete.
90 2015-11-17 Mike Frysinger <vapier@gentoo.org>
92 * sim-main.h (WITH_MODULO_MEMORY): Delete.
94 2015-11-15 Mike Frysinger <vapier@gentoo.org>
96 * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
98 2015-11-14 Mike Frysinger <vapier@gentoo.org>
100 * interp.c (sim_close): Delete.
102 2015-06-23 Mike Frysinger <vapier@gentoo.org>
104 * configure: Regenerate.
106 2015-06-12 Mike Frysinger <vapier@gentoo.org>
108 * configure: Regenerate.
110 2015-06-12 Mike Frysinger <vapier@gentoo.org>
112 * configure: Regenerate.
114 2015-06-11 Mike Frysinger <vapier@gentoo.org>
116 * interp.c (INLINE): Delete define.
118 2015-04-18 Mike Frysinger <vapier@gentoo.org>
120 * sim-main.h (SIM_CPU): Delete.
122 2015-04-18 Mike Frysinger <vapier@gentoo.org>
124 * sim-main.h (sim_cia): Delete.
126 2015-04-17 Mike Frysinger <vapier@gentoo.org>
128 * sim-main.h (CIA_GET, CIA_SET): Delete.
130 2015-04-15 Mike Frysinger <vapier@gentoo.org>
132 * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
133 * sim-main.h (STATE_CPU): Delete.
135 2015-04-13 Mike Frysinger <vapier@gentoo.org>
137 * configure: Regenerate.
139 2015-04-13 Mike Frysinger <vapier@gentoo.org>
141 * Makefile.in (SIM_OBJS): Add sim-cpu.o.
142 * interp.c (v850_pc_get, v850_pc_set): New functions.
143 (sim_open): Declare new local var i. Call sim_cpu_alloc_all.
144 Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
145 (sim_pc_get): Delete.
146 * sim-main.h (SIM_CPU): Define.
147 (struct sim_state): Change cpu to an array of pointers.
150 2015-04-06 Mike Frysinger <vapier@gentoo.org>
152 * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
154 2015-03-31 Mike Frysinger <vapier@gentoo.org>
156 * config.in, configure: Regenerate.
158 2015-03-24 Mike Frysinger <vapier@gentoo.org>
160 * interp.c (sim_pc_get): New function.
162 2015-03-16 Mike Frysinger <vapier@gentoo.org>
164 * config.in, configure: Regenerate.
166 2015-03-14 Mike Frysinger <vapier@gentoo.org>
168 * Makefile.in (SIM_RUN_OBJS): Delete.
170 2015-03-14 Mike Frysinger <vapier@gentoo.org>
172 * configure.ac (AC_CHECK_HEADERS): Delete unistd.h & stdlib.h &
173 string.h & strings.h & time.h.
174 * aclocal.m4, configure: Regenerate.
176 2015-02-27 Nick Clifton <nickc@redhat.com>
178 * sim-main.h (reg64_t): New type.
179 (v850_regs): Add selID_sregs field.
180 (VR, SAT16, SAT32, ABS16, ABS32 ): New macros.
181 * v850-dc: Add fields for v850e3v5 instructions.
182 * v850.igen (cvtf.dl): Use correctly signed local value.
183 (cvtf.dw, cvtf.sw, trncf.dul, trncf.dl, trncf.sul, trncf.sw):
185 * interp.c: Fix old style function declarations.
186 * simops.c: Likewise.
188 2015-02-24 Nick Clifton <nickc@redhat.com>
190 * v850.igen: Add more e3v5 support.
191 (FMAF.S): New pattern.
192 (FMSF.S): New pattern.
193 (FNMAF.S): New pattern.
194 (FNMSF.S): New pattern.
195 (cnvq15q30): New pattern.
196 (cnvq30q15): New pattern.
197 (cnvq31q62): New pattern.
198 (cnvq62q31): New pattern.
199 (dup.h): New pattern.
200 (dup.w): New pattern.
201 (expq31): New pattern.
202 (modadd): New pattern.
203 (mov.dw): New pattern.
204 (mov.h): New pattern.
205 (mov.w): New pattern.
206 (pki16i32): New pattern.
207 (pki16ui8): New pattern.
208 (pki32i16): New pattern.
209 (pki64i32): New pattern.
210 (pkq15q31): New pattern.
211 (pkq30q31): New pattern.
212 (pkq31q15): New pattern.
213 (pkui8i16): New pattern.
214 (vabs.h): New pattern.
215 (vabs.w): New pattern.
216 (vadd.dw): New placeholder pattern.
217 (vadd.h): New placeholder pattern.
218 (vadd.w): New placeholder pattern.
219 (vadds.h): New placeholder pattern.
220 (vadds.w): New placeholder pattern.
221 (vaddsat.h): New placeholder pattern.
222 (vaddsat.w): New placeholder pattern.
224 (vbiq.h): New placeholder pattern.
225 (vbswap.dw): New placeholder pattern.
226 (vbswap.h): New placeholder pattern.
227 (vbswap.w): New placeholder pattern.
228 (vcalc.h): New placeholder pattern.
229 (vcalc.w): New placeholder pattern.
230 (vcmov): New placeholder pattern.
232 2014-08-19 Alan Modra <amodra@gmail.com>
234 * configure: Regenerate.
236 2014-08-15 Roland McGrath <mcgrathr@google.com>
238 * configure: Regenerate.
239 * config.in: Regenerate.
241 2014-03-04 Mike Frysinger <vapier@gentoo.org>
243 * configure: Regenerate.
245 2013-09-23 Alan Modra <amodra@gmail.com>
247 * configure: Regenerate.
249 2013-06-03 Mike Frysinger <vapier@gentoo.org>
251 * aclocal.m4, configure: Regenerate.
253 2013-05-13 Nick Clifton <nickc@redhat.com>
255 * v850.igen (LDSR): Accept but ignore a selID parameter.
257 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
259 * configure: Rebuild.
261 2013-01-28 Nick Clifton <nickc@redhat.com>
263 * simops.c (v850_rotl): New function.
264 (v850_bins): New function.
265 * simops.h: Add prototypes fir v850_rotl and v850_bins.
266 * v850-dc: Add entries for V850e3v5.
267 * v850.igen: Add support for v850e3v5.
268 (ld.dw, st.dw, rotl, bins): New patterns.
270 2013-01-10 Nick Clifton <nickc@redhat.com>
272 * interp.c (sim_open): Add support for bfd_arch_v850_rh850
273 architecture type. Add support for bfd_mach_v850e2 and
274 bfd_mach_v850e2v3 machine numbers.
275 * v850.igen (dbtrap): Add support for SIM_OPEN_DEBUG.
276 (cmpf.d): Correct order of operands.
278 (trncf.dul): New pattern.
279 (trncf.duw): New pattern.
280 (trncf.sul): New pattern.
281 (trncf.suw): New pattern.
282 * v850-dc: Correct bitfield selection for TRNCF.SW and CVTF.SW.
284 2012-09-13 Nick Clifton <nickc@redhat.com>
286 * v850.igen (W,WWWW): Correct computation of register number.
287 (JR32): Remove unnecessary comma.
288 (cmovf.s): Register 0 is an invalid source register.
289 (maddf.s): Remove bogus intermediary rounding.
290 (nmaddf.s): Likewise.
291 (trncf.sl): Remove bogus initial rounding.
292 (trncf.dw): Likewise.
293 (trncf.sl): Likewise.
294 (trncf.sw): Likewise.
296 2012-06-15 Joel Brobecker <brobecker@adacore.com>
298 * config.in, configure: Regenerate.
300 2012-03-28 Rathish C <rathish.c@kpitcummins.com>
302 * sim-main.h (struct _v850_regs): Add new fields mpu0_sregs,
303 mpu1_sregs, and fpu_sregs.
304 (MPU0_SR, MPU1_SR, FPU_SR): New macros for accessing new fields
305 in _v850_regs struct.
307 (SP): Redefine using SP_REGNO.
308 (PSW_REGNO, EIIC, FEIC, DBIC, DIR, EIWR, FEWR, DBWR, BSEL, PSW_NPV)
309 (PSW_DMP, PSW_IMP, ECR_EICC, ECR_FECC, FPSR, FPSR_REGNO, FPEPC)
310 (FPST, FPST_REGNO, FPCC, FPCFG, FPCFG_REGNO, FPSR_DEM, FPSR_SEM)
311 (FPSR_RM, FPSR_RN, FPSR_FS, FPSR_PR, FPSR_XC, FPSR_XCE, FPSR_XCV)
312 (FPSR_XCZ, FPSR_XCO, FPSR_XCU, FPSR_XCI, FPSR_XE, FPSR_XEV)
313 (FPSR_XEZ, FPSR_XEO, FPSR_XEU, FPSR_XEI, FPSR_XP, FPSR_XPV)
314 (FPSR_XPZ, FPSR_XPO, FPSR_XPU, FPSR_XPI, FPST_PR, FPST_XCE)
315 (FPST_XCV, FPST_XCZ, FPST_XCO, FPST_XCU, FPST_XCI, FPST_XPV)
316 (FPST_XPZ, FPST_XPO, FPST_XPU, FPST_XPI, FPCFG_RM, FPCFG_XEV)
317 (FPCFG_XEZ, FPCFG_XEO, FPCFG_XEU, FPCFG_XEI, GET_FPCC, CLEAR_FPCC)
318 (SET_FPCC, TEST_FPCC, FPSR_GET_ROUND, MPM, MPC, MPC_REGNO, TID)
319 (PPA, PPM, PPC, DCC, DCV0, DCV1, SPAL, SPAU, IPA0L, IPA0U, IPA1L)
320 (IPA1U, IPA2L, IPA2U, IPA3L, IPA3U, DPA0L, DPA0U, DPA1L, DPA1U)
321 (DPA2L, DPA2U, DPA3L, DPA3U, PPC_PPE, SPAL_SPE, SPAL_SPS, VIP)
322 (VMECR, VMTID, VMADR, VPECR, VPTID, VPADR, VDECR, VDTID, MPM_AUE)
323 (MPM_MPE, VMECR_VMX, VMECR_VMR, VMECR_VMW, VMECR_VMS, VMECR_VMRMW)
324 (VMECR_VMMS, IPA2ADDR, IPA_IPE, IPA_IPX, IPA_IPR, IPE0, IPE1, IPE2)
325 (IPE3, IPX0, IPX1, IPX2, IPX3, IPR0, IPR1, IPR2, IPR3, DPA2ADDR)
326 (DPA_DPE, DPA_DPR, DPA_DPW, DPE0, DPE1, DPE2, DPE3, DPR0, DPR1)
327 (DPR2, DPR3, DPW0, DPW1, DPW2, DPW3, DCC_DCE0, DCC_DCE1, PPA2ADDR)
328 (PPC_PPC, PPC_PPE, PPC_PPM): New macros.
329 (FPU_COMPARE): New enum.
330 (TRACE_FP_INPUT_FPU1, TRACE_FP_INPUT_FPU2, TRACE_FP_INPUT_FPU3)
331 (TRACE_FP_INPUT_BOOL1_FPU2, TRACE_FP_INPUT_WORD2)
332 (TRACE_FP_RESULT_WORD1, TRACE_FP_RESULT_WORD2): New macros.
333 * simops.c (Add32): Update prototype.
334 (update_fpsr): New function.
335 (SignalException): New function.
336 (SignalExceptionFPE): New function.
337 (check_invalid_snan): New function.
338 (v850_float_compare): New function.
339 (v850_div): New function.
340 (v850_divu): New function.
341 (v850_sar): New function.
342 (v850_shl): New function.
343 (v850_shr): New function.
344 (v850_satadd): New function.
345 (v850_satsub): New function.
346 (load_data_mem): New function.
347 (store_data_mem): New function.
348 (mpu_load_mem_test): New function.
349 (mpu_store_mem_test): New function.
350 * simops.h: Add function prototype for above mentioned functions.
351 (check_cvt_fi, check_cvt_if, check_cvt_ff): Define.
352 * v850-dc: Add entry for v850e2 and v850e2v3.
353 * v850.igen: Add support for v850e2 and v850e2v3.
355 2012-03-24 Mike Frysinger <vapier@gentoo.org>
357 * aclocal.m4, config.in, configure: Regenerate.
359 2011-12-03 Mike Frysinger <vapier@gentoo.org>
361 * aclocal.m4: New file.
362 * configure: Regenerate.
364 2011-10-17 Mike Frysinger <vapier@gentoo.org>
366 * configure.ac: Change include to common/acinclude.m4.
368 2011-10-17 Mike Frysinger <vapier@gentoo.org>
370 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
371 call. Replace common.m4 include with SIM_AC_COMMON.
372 * configure: Regenerate.
374 2011-07-05 Mike Frysinger <vapier@gentoo.org>
376 * interp.c (sim_do_command): Delete.
378 2011-03-21 Kevin Buettner <kevinb@redhat.com>
380 * simops (OP_10007E0): Update errno handling as most traps
381 do not invoke the host's functionality directly. Invoke
382 sim_io_stat() instead of stat() for implementing TARGET_SYS_stat.
383 Implement TARGET_SYS_fstat, TARGET_SYS_rename, and TARGET_SYS_unlink.
385 2011-02-14 Mike Frysinger <vapier@gentoo.org>
387 * simops.c (OP_10007E0): Change zfree to free.
389 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
391 * interp.c (sim_store_register): Update return value to
394 2010-03-30 Mike Frysinger <vapier@gentoo.org>
396 * interp.c (interrupt_names): Add const to pointer type.
397 (do_interrupt): Add const to interrupt_name.
399 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
401 * configure: Regenerate.
403 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
405 * config.in: Regenerate.
406 * configure: Likewise.
408 * configure: Regenerate.
410 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
412 * configure: Regenerate to track ../common/common.m4 changes.
415 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
416 Daniel Jacobowitz <dan@codesourcery.com>
417 Joseph Myers <joseph@codesourcery.com>
419 * configure: Regenerate.
421 2008-02-05 DJ Delorie <dj@redhat.com>
423 * simops.c (OP_1C007E0): Compensate for 64 bit hosts.
424 (OP_18007E0): Likewise.
425 (OP_2C007E0): Likewise.
426 (OP_28007E0): Likewise.
427 * v850.igen (divh): Likewise.
429 * simops.c (OP_C0): Correct saturation logic.
435 * simops.c (OP_2A0): If the shift count is zero, clear the
437 (OP_A007E0): Likewise.
439 (OP_C007E0): Likewise.
441 (OP_8007E0): Likewise.
443 * simops.c (OP_2C207E0): Correct PSW flags for special divu
445 (OP_2C007E0): Likewise, for div.
446 (OP_28207E0): Likewise, for divhu.
447 (OP_28007E0): Likewise, for divh. Also, sign-extend the correct
449 * v850.igen (divh): Likewise, for 2-op divh.
451 * v850.igen (bsh): Fix carry logic.
453 2007-02-20 Daniel Jacobowitz <dan@codesourcery.com>
455 * Makefile.in (interp.o): Uncomment and update.
457 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
459 * acconfig.h: Remove.
460 * config.in: Regenerate.
462 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
464 * configure: Regenerated.
466 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
468 * configure: Regenerated.
470 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
472 * configure: Regenerated.
474 2005-03-23 Mark Kettenis <kettenis@gnu.org>
476 * configure: Regenerate.
478 2005-01-14 Andrew Cagney <cagney@gnu.org>
480 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
481 explicit call to AC_CONFIG_HEADER.
482 * configure: Regenerate.
484 2005-01-12 Andrew Cagney <cagney@gnu.org>
486 * configure.ac: Update to use ../common/common.m4.
487 * configure: Re-generate.
489 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
491 * configure: Regenerated to track ../common/aclocal.m4 changes.
493 2005-01-07 Andrew Cagney <cagney@gnu.org>
495 * configure.ac: Rename configure.in, require autoconf 2.59.
496 * configure: Re-generate.
498 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
500 * configure: Regenerate for ../common/aclocal.m4 update.
502 2004-01-18 Mark Kettenis <kettenis@gnu.org>
504 * simops.c: Include <sys/types.h>.
506 2003-09-05 Andrew Cagney <cagney@redhat.com>
507 Nick Clifton <nickc@redhat.com>
509 * interp.c (sim_open): Accept bfd_mach_v850e1.
510 * v850-dc: Add entry for v850e1.
511 * v850.igen: Add support for v850e1.
512 Add code for DBTRAP and DBRET instructions.
513 (dbtrap): Create a separate v850e1 specific instruction.
514 Only generate a trap if the target is not the v850e1.
515 Otherwise treat it as a special kind of branch.
516 (break): Mark as v850/v850e specific.
518 2003-05-16 Ian Lance Taylor <ian@airs.com>
520 * Makefile.in (SHELL): Make sure this is defined.
521 (tmp-igen): Use $(SHELL) whenever we invoke move-if-change.
523 2003-04-06 Nick Clifton <nickc@redhat.com>
525 * simops.c (OP_40): Delete. Move code to...
526 * v850-igen.c (): ...Here. Sign extend the first operand.
527 * simops.h (OP_40): Remove prototype.
529 2003-02-27 Andrew Cagney <cagney@redhat.com>
531 * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
533 2002-11-30 Andrew Cagney <cagney@redhat.com>
535 * simops.c: Use int, 1, 0 instead of boolean, true and false.
538 2002-09-27 Jim Wilson <wilson@redhat.com>
540 * simops.c (OP_E6077E0): And op1 with 7 after reading register, not
542 (BIT_CHANGE_OP): Likewise.
544 2002-09-26 Jim Wilson <wilson@redhat.com>
546 * simops (OP_10007E0): Don't subtract 4 from PC.
548 2002-09-19 Nick Clifton <nickc@redhat.com>
550 * interp.c (sim_open): Remove reference to v850ea.
551 (sim_create_inferior): Likewise.
553 * v850.igen: Remove all references to v850ea, including v850ea
554 specific instructions.
556 2002-08-29 Nick Clifton <nickc@redhat.com>
558 From 2001-08-23 Catherine Moore <clm@redhat.com>
560 * Makefile.in: Add gen-zero-r0 option.
561 * sim-main.h (GPR_SET, GPR_CLEAR): Define.
562 * simops.c (OP_24007E0): Sign extend the imm9
563 operand of a mul instruction.
565 2002-06-17 Andrew Cagney <cagney@redhat.com>
567 * simops.c (trace_result): Fix printf formatting.
569 2002-06-16 Andrew Cagney <ac131313@redhat.com>
571 * configure: Regenerated to track ../common/aclocal.m4 changes.
573 2001-12-02 Andrew Cagney <ac131313@redhat.com>
575 * Makefile.in (simops.h, table.c): Delete targets.
576 (tmp-gencode, gencode.o, gencode): Delete targets.
577 (simops.h): New file.
578 ($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
579 * gencode.c: Delete file.
581 2001-04-15 J.T. Conklin <jtc@redback.com>
583 * Makefile.in (simops.o): Add simops.h to dependency list.
585 2001-03-14 Andrew Cagney <ac131313@redhat.com>
587 * Makefile.in (gencode): Link with libintl.
589 2001-01-31 Jonathan Larmour <jlarmour@redhat.com>
591 * Makefile.in (gencode): Link with libopcodes in build tree rather
592 than building source files from there.
594 2000-05-30 Nick Clifton <nickc@cygnus.com>
596 * v850.igen: Remove illegal instruction pattern, since it is the
597 same as the breakpoint pattern.
599 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
601 * configure: Regenerated to track ../common/aclocal.m4 changes.
603 2000-04-14 Gary Thomas <gthomas@redhat.com>
605 * v850.igen: Define 'br *' as illegal since this is the only
606 way to provide a breakpoint on some v850 family processors.
608 2000-03-24 Frank Ch. Eigler <fche@redhat.com>
610 * v850.igen (ilgop): New insn pattern for four-byte breakpoints.
612 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
614 * configure: Regenerated to track ../common/aclocal.m4 changes.
616 1999-05-08 Felix Lee <flee@cygnus.com>
618 * configure: Regenerated to track ../common/aclocal.m4 changes.
620 Tue Dec 1 17:25:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
622 * Makefile.in (NL_TARGET): Define as -DNL_TARGET_v850.
624 Wed Nov 25 17:52:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
626 * Makefile.in (simops.o): Depends on targ-vals.h
627 * simops.c: Include targ-vals.h instead of
628 libgloss/.../syscall.h. Replace SYS_* with TARGET_SYS_*.
629 (divn, divun, OP_1C007E0, OP_18207E0, OP_1C207E0,OP_18007E0):
630 Replace signed long int with signed32.
632 Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com>
634 * interp.c: #include "itable.h".
635 (get_insn_name): New function.
636 (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
637 * sim-main.h (MAX_INSNS,INSN_NAME): Delete.
639 Wed May 6 19:43:27 1998 Doug Evans <devans@canuck.cygnus.com>
641 * sim-main.h (INSN_NAME): New arg `cpu'.
643 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
645 * configure: Regenerated to track ../common/aclocal.m4 changes.
647 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
649 * configure: Regenerated to track ../common/aclocal.m4 changes.
652 Sun Apr 26 15:19:14 1998 Tom Tromey <tromey@cygnus.com>
654 * acconfig.h: New file.
655 * configure.in: Reverted change of Apr 24; use sinclude again.
657 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
659 * configure: Regenerated to track ../common/aclocal.m4 changes.
662 Fri Apr 24 11:18:08 1998 Tom Tromey <tromey@cygnus.com>
664 * configure.in: Don't call sinclude.
666 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
668 * configure: Regenerated to track ../common/aclocal.m4 changes.
669 * sim-main.h (SIM_MAIN_H): Wrap header.
671 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
673 * configure: Regenerated to track ../common/aclocal.m4 changes.
675 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
677 * configure: Regenerated to track ../common/aclocal.m4 changes.
679 Tue Mar 10 15:54:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
681 * interp.c (sim_stop): Delete, second attempt.
683 Thu Feb 26 19:09:47 1998 Andrew Cagney <cagney@b1.cygnus.com>
685 * interp.c (sim_info): Delete.
687 Wed Feb 18 10:47:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
689 * sim-main.h (TRACE_ALU_INPUT*): Delete. Moved to sim-trace.[hc].
691 * simops.c (trace_result): Call trace_generic instead of
693 (trace_module): Change variable type to integer.
694 (trace_input): Initialize trace_module with TRACE_ALU_IDX.
696 * sim-main.h (trace_module): Change variable decl to integer type.
697 (TRACE_BRANCH*, TRACE_LD, TRACE_ST): Update.
699 Tue Feb 17 12:51:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
701 * interp.c (sim_store_register, sim_fetch_register): Pass in
702 length parameter. Return -1.
704 Tue Feb 3 16:24:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
706 * sim-main.h (IMEM16, IMEM16_IMMED): Rename IMEM and
707 IMEM_IMMED. To match recent igen change.
709 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
711 * configure: Regenerated to track ../common/aclocal.m4 changes.
713 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
715 * configure: Regenerated to track ../common/aclocal.m4 changes.
717 Fri Jan 30 09:51:27 1998 Andrew Cagney <cagney@b1.cygnus.com>
719 * sim-main.h (CPU_CIA): Delete, replaced by.
720 (CIA_SET, CIA_SET): Define.
722 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
724 * configure: Regenerated to track ../common/aclocal.m4 changes.
726 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
728 * configure: Regenerated to track ../common/aclocal.m4 changes.
731 Fri Dec 5 09:26:08 1997 Nick Clifton <nickc@cygnus.com>
733 * v850.igen: Revert break value back to its old value.
735 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
737 * configure: Regenerated to track ../common/aclocal.m4 changes.
739 Wed Dec 3 17:27:19 1997 Nick Clifton <nickc@cygnus.com>
741 * v850.igen: Make break have a zero first field, since otherwise
742 it clashes with the DIVH instruction.
744 Sat Nov 22 21:32:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
746 * simops.c (OP_10007E0): Rename SIGABRT -> SIM_SIGABRT. Give
747 sim_stopped instead of sim_signalled.
749 * v850.igen (BREAK), simops.c (OP_12007E0): Rename SIGTRAP to
751 (illegal): Rename SIGILL to SIM_SIGILL.
753 * sim-main.h, simops.c, interp.c: Do not include signal.h.
755 * sim-main.h: Include sim-signal.h instead of signal.h.
756 (SIGTRAP, SIGQUIT): Delete definition.
757 (SIG_V850_EXIT): Delete definition.
759 Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com>
761 * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS).
763 Fri Oct 31 10:33:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
765 * interp.c (sim_open): Check state magic number.
766 (sim-assert.h): Include.
768 Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
770 * v850.igen: Add model filter field to records.
772 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
774 * configure: Regenerated to track ../common/aclocal.m4 changes.
776 Fri Sep 26 11:56:02 1997 Felix Lee <flee@cygnus.com>
778 * sim-main.h: delete null override of SIM_ENGINE_HALT_HOOK and
779 SIM_ENGINE_RESTART_HOOK.
781 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
783 * configure: Regenerated to track ../common/aclocal.m4 changes.
785 Wed Sep 24 17:28:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
787 * sim-main.h (WITH_TARGET_WORD_MSB): Delete.
789 * configure.in (SIM_AC_OPTION_BITSIZE): Specify 32 bit
790 architecture with MSB == 31.
792 Wed Sep 24 14:04:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
794 * v850.igen: Make divh insn with RRRRR==0 breakpoint.
796 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
798 * configure: Regenerated to track ../common/aclocal.m4 changes.
800 Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
802 * Makefile.in (SIM_WARNINGS, SIM_ALIGNMENT, SIM_ENDIAN,
803 SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common.
804 (SIM_EXTRA_CFLAGS): Update.
806 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
808 * configure: Regenerated to track ../common/aclocal.m4 changes.
809 * configure.in: Really specify NONSTRICT_ALIGNMENT as the default.
811 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
813 * configure.in: Specify NONSTRICT_ALIGNMENT as the default.
814 * configure: Regenerated to track ../common/aclocal.m4 changes.
816 Fri Sep 19 10:37:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
818 * v850.igen (disp16): Use EXTEND16 to sign extend disp.
819 (disp22): Only shift left by 1, not 2.
820 ("jmp"): Ensure PC is 2 byte aligned.
822 * simops.c, v850.igen: Move "Bcond", "jr", "jarl" code to
823 v850.igen. Fix tracing.
825 * simops.c (OP_300, OP_400, OP_500): Move "sdl.b", "sld.h",
826 "sld.w" insns to v850.igen. Fix tracing.
827 (OP_70): Ditto for "sld.hu".
829 * v850.igen: Clarify tracing of "sld.b", "sld.h" et.al.
831 * simops.c (condition_met): Make global.
833 * sim-main.h (TRACE_ALU_INPUT3, TRACE_BRANCH0, TRACE_LD,
835 (TRACE_LD_NAME): Define.
837 * simops.c: Move "cmov", "cmov imm" to v850.igen, fix.
839 Wed Sep 17 16:21:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
841 * simops.c: Move "mov", "reti", to v850.igen, fix tracing.
843 * interp.c (hash): Delete.
845 * v850.igen (nop): Really do nothing.
847 * interp.c (do_interrupt): Mask interrupts after PSW is saved, not
849 * v850.igen (reti): Return to current PC not previous.
851 Wed Sep 17 14:02:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
853 * simops.c: Move "ctret", "bsw", "hsw" to v850.igen, fix tracing.
854 (trace_module): Global, save component/module name across insn.
856 * simops.c: Move "bsh" to v850.igen, fix.
858 * v850.igen (callt): Load correct number of bytes. Fix tracing.
859 (stsr, ldsr): Correct src, dest fields. Fix tracing.
860 (ctret): Force alignment. Fix tracing.
862 Tue Sep 16 22:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
864 * simops.c (trace_output): Add result argument.
865 (trace_result): New function. Simpler version of trace_output,
866 assumes trace needed.
867 (trace_output): Call trace_result.
868 (trace_output): For IMM_REG_REG, trace correct register.
869 (trace_input): Add case for 16bit immediates.
870 (OP_600, OP_640, OP_680, OP_6C0, OP_6A0): Use.
872 * sim-main.h (TRACE_ALU_INPUT, TRACE_ALU_RESULT): Define.
873 (trace_values, trace_name, trace_pc, trace_num_values): Make
877 v850.insn (movea, stsr): Use.
878 (sxb, sxh, zxb, zxh): Ditto.
880 Tue Sep 16 21:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
882 * simops.c: Move "movea" from here.
883 * v850.igen: To here.
885 * v850.igen (simm16): Define, sign extend imm16.
886 (uimm16): Define, no sign extension.
887 (addi, andi, movea, movhi, mulhi, ori, satsubi, xori): Use.
889 * simops.c: Move "sxh", "switch", "sxb", "callt", "dispose",
891 * v850.igen: To here.
892 (switch): Fix off by two error in NIA calc.
894 Tue Sep 16 15:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
896 * simops.c (trace_pc, trace_name, trace_values, trace_num_values):
898 (trace_input): Just save pc, name and values for trace_output.
899 (trace_output): Write trace values to a buffer. Use
900 trace_one_insn to print trace info and buffer.
901 (SIZE_OPERANDS, SIZE_LOCATION): Delete.
903 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
905 * sim-main.h (struct _sim_cpu): Add psw_mask so that reserved bits
908 * simops.c (OP_2007E0, OP_4007E0): Move "ldsr", "stsr"
909 instructions from here.
910 * v850.igen (ldsr, stsr): To here. Mask out reserved bits when
913 * interp.c (sim_open): Set psw_mask if machine known.
915 Tue Sep 16 10:20:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
917 * v850-dc: Add rule to diferentiate between breakpoint and divh.
918 * v850.igen (break): New instruction, breakpoint simulator.
919 * v850.igen (breakpoint): Enable. Change to a 32bit instruction.
921 Mon Sep 15 18:44:05 1997 Jim Wilson <wilson@cygnus.com>
923 * simops.c (Multiply64): Don't store into register zero.
925 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
927 * Makefile.in (semantics.o): Add dependency.
929 * sim-main.h (SAVE_1, SAVE_2): Perform backward compatible save,
930 do not adjust CIA/NIA.
932 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
934 * simops.c (OP_300, OP_400, OP_70): Make behavour depend on PSW[US].
936 * simops.c: Move "divun", "sld.bu", "divhn", "divhun", "divn",
937 "divun", "pushml" code from here to v850.igen.
938 (divun): Make global.
939 (type3_regs): Make global
941 * v850.igen: Move simops.c code to here.
943 * interp.c (sim_create_inferior): For v850eq set US bit by
946 * interp.c (sim_open): Don't set arch, now set by
949 * configure: Regenerated to track ../common/aclocal.m4 changes.
951 Mon Sep 15 14:39:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
953 * simops.c (op_types): Move from here.
956 * sim-main.h (trace_input, trace_output), simops.c: Make global.
958 * simops.c (OP_60): Move "jmp" code from here.
959 * v850.igen (jmp): To here.
961 * simops.c (OP_60): Move "sld.bu" code from here.
962 * v850.igen (sld.bu): To here.
964 Fri Sep 12 15:11:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
966 * v850.igen (prepare, ...): Add to v850eq architecture.
968 * interp.c (sim_open): Default to v850eq.
970 * interp.c (sim_open): Default to v850e.
971 * sim-main.h (signal.h): Include.
973 * v850.igen (illegal): Report/halt illegal instructions.
975 * Makefile.in (SIM_EXTRA_CFLAGS): Add SIM_RESERVED_BITS.
977 * configure.in: Add reserved bits option.
978 * configure: Regenerate.
980 Thu Sep 11 08:40:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
982 * interp.c (sim_open): Use sim_do_commandf instead of asprintf.
984 * sim-main.h (INSN_NAME):
986 * Makefile.in (INCLUDE): Add SIM_EXTRA_DEPS.
987 (SIM_EXTRA_DEPS): Add itable.h
988 (tmp-gencode): Does not depend on simops.h
990 * sim-main.h (itable.h): Include.
991 (MAX_INSNS, INSN_NAME): Define.
993 * interp.c: Compute inttype from the interrupt_names index that
996 Wed Sep 10 10:25:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
998 * simops.c (trace_input): Use trace_printf instead of
1000 (trace_output): Ditto.
1001 (trace_input): Only trace when TRACE_ALU_P. Delete code
1002 disasembling instruction.
1003 (trace_output): Only trace when TRACE_ALU_P.
1005 Tue Sep 9 01:29:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
1007 * simops.c (trace_input, trace_output): Use sim_io_printf.
1008 (OP_620): Pass correct argument to trace.
1010 (trace_input): Obtain prog_bfd, text_start et.al from simulator
1013 Mon Sep 8 21:03:52 1997 Andrew Cagney <cagney@b1.cygnus.com>
1015 * v850.igen: New file.
1016 * v850-dc: New file.
1018 Mon Sep 8 18:33:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
1021 * sim-main.h (SEXT16): Delete, use EXTEND16.
1022 (SEXT8): Delete, use EXTEND8.
1023 (SEXT32): Delete, used?
1024 (SEXT40, SEXT44, SEXT64): Use UNSIGNED64 for constants, not ...LL.
1025 (WITH_TARGET_WORD_MSB): Define as 31. v850 little bit endian.
1027 * simops.c: Use EXTEND15 from sim-bits instead of SEXT16.
1029 * sim-main.h (DEBUG_TRACE, DEBUG_VALUES, v850_debug): Delete,
1030 replace with TRACE_INSN_P and TRACE_ALU_P.
1032 * simops.c (trace_input, trace_output): Update.
1034 * interp.c (sim_engine_run): Delete.
1035 (lookup_hash): Delete.
1036 (sim_open): Do not fill hash table.
1037 (sim_trace): Delete.
1039 Fri Sep 5 17:04:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1041 * simops.c (OP_FFFF): Use sim_engine_halt.
1042 (OP_12007E0): Ditto.
1043 (OP_10007E0): Ditto.
1045 * sim-main.h (struct sim_cpu): Delete member exception. Using
1048 * interp.c (sim_info): Do not do anything in sim-info.
1049 (sim_stop): Delete, replace with sim-stop.
1050 (sim_stop_reason): Delete, replace with sim-reason.
1052 * sim-main.h (WITH_WATCHPOINTS): Define.
1053 (WITH_MODULO_MEMORY): Define
1055 * Makefile.in (SIM_OBJS): Add sim-resume, sim-watch, sim-stop,
1058 * interp.c (enum interrupt_cond_type): Delete.
1059 (struct interrupt_generator): Delete.
1060 (enum interrupt_type): Drop int_none.
1061 (sim_open): Initialize WATCHPOINT module.
1062 (sim_resume, sim_run): Rename sim_resume to sim_run.
1063 (sim_engine_run): Replace interrupt code with call to sim-events.
1064 (sim_set_interrupt): Delete.
1065 (sim_parse_number): Delete.
1067 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1069 * configure: Regenerated to track ../common/aclocal.m4 changes.
1071 Thu Sep 4 18:11:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
1073 * simops.c (fetch_argv): New function, fetch a arg vector from
1076 * configure.in: Check for fork, execve, execv.
1077 * configure: Regenerate.
1079 * interp.c (sim_store_register, sim_fetch_register): Use H2T_4 and
1080 T2H_4 for byte swapping.
1082 * sim-main.h, interp.c (get_word, get_half, get_byte, put_word,
1083 put_half, put_byte): Delete.
1085 * Makefile.in (SIM_OBJS): Add sim-memopt.o module.
1087 * sim-main.h (load_mem, store_mem): Redefine as macros.
1088 (IMEM, IMEM_IMMED): New macros - fetch instructions.
1090 * simops.c (OP_10007E0): For SYS_read, SYS_write, SYS_open
1091 transfer data via a buffer.
1092 (fetch_str): New function, fetch string from memory.
1094 * Makefile.in (SIM_OBJS): Add sim-hrw.o module.
1096 * interp.c (sim_open): Establish memory maps using sim-memopt.c
1098 (sim_do_command): Print error if memory-map command is used. Call
1100 (map): Delete, replaced by sim-core.
1101 (sim_memory_init): Delete, replaced by sim-core.
1102 (sim_set_memory_map): Delete, replaced by sim-memopt.
1103 (load_mem): Delete, replaced by sim-core.
1104 (store_mem): Delete, replaced by sim-core.
1105 (sim_write): Delete, replaced by sim-hrw.
1106 (sim_read): Delete, replaced by sim-hrw.
1108 * sim-main.h (struct sim_state): Remove memory members, using
1111 Wed Sep 3 10:18:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1113 * sim-main.h: Replace SIM_HAVE_FLATMEM with mem ptr.
1114 * interp.c (map): Do not add to a void pointer.
1116 * Makefile.in (INCLUDE): Add sim-main.h
1118 * configure.in: Check for time.h
1119 * configure: Re-generate.
1121 * interp.c (struct interrupt_generator): Make time unsigned long,
1123 (sim_resume): Make oldpc SIM_ADDR.
1124 (struct hash_entry): Make mask/opcode unsigned.
1126 * v850_sim.h (struct simops ): Make opcode and mask unsigned.
1128 * simops.c (utime.h): Include if available.
1129 (OP_10007E0): Check for UTIME function.
1130 (divun): Put parentheses around shift argument.
1131 (OP_640): Put parentheses around shift argument, was wrong.
1132 (OP_107F0): Return something.
1134 * interp.c (sim_parse_number): Use strtoul not strtol.
1135 (sim_resume): Use sim_elapsed_time_get to keep track of the time.
1137 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
1138 (SIM_AC_OPTION_ENDIAN): Set to hardwired big.
1139 (SIM_AC_OPTION_HOST_ENDIAN): Add.
1140 (AC_CHECK_FUNCS): Add utime.
1141 (AC_CHECK_HEADERS): Add stdlib.h, string.h, strings.h, utime.h
1142 configure: Regenerate.
1145 * Makefile.in (SIM_RUN_OBJS): Use nrun.o.
1146 (SIM_OBJS): Add sim-io.o, sim-hload.o, sim-utils.o, sim-options.o,
1147 sim-config.o, sim-module.o, sim-events.o, sim-core.o,
1148 sim-endian.o, sim-engine.o, sim-trace.o, sim-profile.o
1149 (SIM_ENDIAN, SIM_WARNGINS): Define.
1151 * simops.c (OP_10007E0): Use sim_io_* for transfers.
1153 * interp.c (sim_resume): Pass sd around.
1155 * simops.c (sim-main.h): Include.
1157 * gencode.c (write_template): Generate #include sim-main.h.
1158 (write_opcodes): Ditto.
1160 * interp.c (prog_bfd, prog_bfd_was_opened_p): Delete.
1161 (v850_callback): Ditto.
1162 (sim_kind, myname): Ditto.
1163 (lookup_hash): Pass SD. Use sim_io_error.
1164 (sim_set_memory_map): Pass in SD, use.
1165 (init_system): Pass in SD, use.
1167 (sim_set_profile): Delete.
1168 (sim_set_profile_size): Delete.
1169 (do_interrupt): Pass in SD, use.
1170 (sim_info): Use sim_io_printf.
1171 (sim_create_inferior): Reset registers. Set PC from prog_bfd
1173 (sim_load): Delete, use common/sim-hload.c
1174 (sim_size): Rename to sim_memory_init.
1175 (sim_write): Remove call to init_system.
1176 (init_system): Delete.
1177 (sim_set_callbacks): Delete.
1178 (sim_set_interrupt): Pass in SD, use.
1179 (start_time): Delete.
1181 * v850_sim.h: Remove everything except `struct simops' from here.
1182 * sim-main.h: Move most to here.
1183 * gencode.c: Move #includes to here.
1185 * sim-main.h(struct _sim_cpu): Rename struct _state.
1186 (#define PC, et.al.): Update
1187 (v850_callback): Delete. Replaced with SIM_DESC arg.
1188 (int8, uint8, int16, uint16, int32, uint32): Define types using
1189 unsigned8 et.al from common/sim-types.h.
1190 * sim-main.h (State): Define as STATE_CPU.
1192 Mon Sep 1 12:07:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1194 * configure.in: Check for time, chmod.
1195 * configure: Regenerate.
1196 * simops.c (SYS_time, SYS_chmod): Use HAVE_TIME, HAVE_CHMOD.
1198 * simops.c (../../libgloss/v850/sys/syscall.h): Include instead of
1200 (OP_10007E0): Check the existance each SYS_* macro independantly.
1202 * v850_sim.h (SIGQUIT, SIGTRAP): Only define if missing.
1204 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1206 * configure: Regenerated to track ../common/aclocal.m4 changes.
1209 Tue Aug 26 10:42:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1211 * interp.c (sim_kill): Delete.
1212 (sim_create_inferior): Add ABFD argument.
1213 (sim_load): Move setting of PC from here.
1214 (sim_create_inferior): To here.
1216 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1218 * configure: Regenerated to track ../common/aclocal.m4 changes.
1221 Mon Aug 25 11:31:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1223 * interp.c (sim_open): Add ABFD argument.
1225 Fri Aug 22 10:39:28 1997 Nick Clifton <nickc@cygnus.com>
1227 * simops.c (bsh): Only set CY flag if either of the bottom
1230 * simops.c (prepare, dispose): Lower numbered
1231 registers go to higher numbered address.
1233 * simops.c (unsigned divide instructions): S bit set if result has
1236 * simops.c (pushml, pushmh, popml, popmh): Lower numbered
1237 registers go to higher numbered address.
1239 Wed Aug 20 13:56:35 1997 Nick Clifton <nickc@cygnus.com>
1241 * simops.c (OP_107E0, OP_107F0, OP_307E0, OP_307F0): Use correct
1242 interpretation of SR bit in list18 structure.
1243 (divn, divun): New functions to perform N step divide functions.
1245 Mon Aug 18 10:59:02 1997 Nick Clifton <nickc@cygnus.com>
1247 * simops.c (OP_300, OP_400, OP_60, OP_70): Support variant opcodes
1248 with US bit set in the PSW.
1250 Wed Aug 13 19:06:55 1997 Nick Clifton <nickc@cygnus.com>
1252 * interp.c (sim_resume): Opcode functions return amount to be
1253 added to PC and all opcodes take a standard format in the OP[]
1256 (do_format_*): Functions removed.
1258 * v850_sim.h (SP, EP): New register mnemonics.
1260 * gencode.c (write_header): Functions prototypes return an
1263 * simops.c: Opcode functions return amount to be added to PC.
1265 * v850_sim.h (CTPC, CTPSW, CTBP): New register mnemonics.
1267 * simops.c: Add support for v850e instructions.
1269 * simops.c: Add support for v850eq instructions.
1271 Tue May 20 10:24:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1273 * interp.c (sim_open): Add callback argument.
1274 (sim_set_callbacks): Delete SIM_DESC argument.
1276 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1278 * configure: Regenerated to track ../common/aclocal.m4 changes.
1280 Wed Apr 23 17:20:16 1997 Doug Evans <dje@canuck.cygnus.com>
1282 * interp.c (prog_bfd_was_opened_p): New static local.
1283 (prog_bfd): New global variable.
1284 (sim_open): Undo patch to add -E support.
1285 (sim_close): Close prog_bfd if sim_load opened it.
1286 (sim_load): Record bfd of loaded file in prog_bfd.
1287 * simops.c (prog_bfd): Renamed from exec_bfd.
1289 Fri Apr 18 14:17:12 1997 Andrew Cagney <cagney@b1.cygnus.com>
1291 * interp.c (sim_stop): Stub function.
1293 Thu Apr 17 03:53:18 1997 Doug Evans <dje@canuck.cygnus.com>
1295 * Makefile.in (SIM_OBJS): Add sim-load.o.
1296 * interp.c (sim_kind, myname): New static locals.
1297 (sim_open): Set sim_kind, myname. Ignore -E arg.
1298 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
1299 load file into simulator. Set start address from bfd.
1300 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1302 Wed Apr 16 19:53:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1304 * simops.c (OP_10007E0): Only provide system calls SYS_execv,
1305 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
1307 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1309 * configure: Regenerated to track ../common/aclocal.m4 changes.
1312 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1314 * interp.c (sim_open): New arg `kind'.
1316 * configure: Regenerated to track ../common/aclocal.m4 changes.
1318 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1320 * configure: Regenerated to track ../common/aclocal.m4 changes.
1322 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1324 * configure: Regenerated to track ../common/aclocal.m4 changes.
1326 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1328 * configure: Re-generate.
1330 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1332 * configure: Regenerate to track ../common/aclocal.m4 changes.
1334 Thu Mar 13 13:00:54 1997 Doug Evans <dje@canuck.cygnus.com>
1336 * interp.c (sim_open): New SIM_DESC result. Argument is now
1338 (other sim_*): New SIM_DESC argument.
1340 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
1342 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1343 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1344 * configure.in: sinclude ../common/aclocal.m4.
1345 * configure: Regenerated.
1347 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1349 * configure configure.in Makefile.in: Update to new configure
1350 scheme which is more compatible with WinGDB builds.
1351 * configure.in: Improve comment on how to run autoconf.
1352 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1353 * Makefile.in: Use autoconf substitution to install common
1356 Mon Jan 20 16:05:34 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1358 * simops.c (OP_{E0,2E0,6E0}): The multiply operations sign extend,
1361 Tue Jan 14 17:06:03 1997 Stu Grossman (grossman@critters.cygnus.com)
1363 * simops.c: Put ifdefs around things to make MSVC happy. Get rid
1364 of unistd.h. Disable SYS_stat, SYS_chown, SYS_time, SYS_times,
1365 SYS_gettimeofday and SYS_utime from MSVC.
1367 Tue Dec 31 18:11:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1369 * simops.c (OP_10007E0): Know that kill encodes the signal number
1370 via: 0xdead0000 | signal and turn it back into a signal.
1372 Fri Dec 27 14:44:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1374 * v850_sim.h (SIG_V850_EXIT): Define as -1.
1376 * interp.c (sim_open): Cast calloc function.
1377 (sim_stop_reason): If signal is SIG_V850_EXIT, inform gdb the
1378 program exited with the appropriate exit code.
1379 (sim_set_interrupt): Declare buildargv.
1381 * simops.c (OP_10007E0): Make exit signal normal exit. Make time
1382 type correct and work on big endian systems.
1384 Wed Nov 20 02:18:44 1996 Doug Evans <dje@canuck.cygnus.com>
1386 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
1387 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
1388 * configure.in: Simplify using macros in ../common/aclocal.m4.
1389 Call AC_CHECK_HEADERS(unistd.h).
1390 * configure: Regenerated.
1391 * config.in: New file.
1392 * simops.c: #include "config.h". #include <unistd.h> if present.
1394 Sun Nov 3 23:02:54 1996 Stan Shebs <shebs@andros.cygnus.com>
1396 * v850_sim.h (State): New slots dummy_mem, pending_nmi.
1397 (EIPC, etc): New macros for system registers.
1398 * simops.c, interp.c: Use everywhere.
1400 * interp.c: Add support for interrupts issued by interrupt
1401 generators, either PC- or time-based. Controlled by simulator
1402 command "sim interrupt".
1404 * interp.c: Add support for variable-size allocation of memory,
1405 via simulator command "sim memory-map".
1406 (map): Issue SIGSEGV for references to invalid memory regions.
1408 Thu Oct 31 14:44:10 1996 Gavin Koch <gavin@cygnus.com>
1410 * simops.c: Include <sys/time.h> for struct timeval and
1413 Wed Oct 30 08:49:10 1996 Jeffrey A Law (law@cygnus.com)
1415 * simops.c (OP_10007E0): Handle SYS_times and SYS_gettimeofday.
1417 * simops.c (OP_10007E0): Handle SYS_time.
1419 Tue Oct 29 14:22:55 1996 Jeffrey A Law (law@cygnus.com)
1421 * simops.c: Include <sys/stat.h>.
1422 (OP_10007E0): Handle SYS_stat.
1424 Thu Oct 24 12:26:35 1996 Jeffrey A Law (law@cygnus.com)
1426 * simops.c (OP_10007E0): Don't declare errno.
1428 * simops.c (OP_500): Mask off low bit in displacement
1430 (OP_501): Similarly.
1432 * simops.c (OP_500): Fix displacement handling for sld.w.
1433 (OP_501): Similarly for sst.w.
1435 * simops.c (trace_input): Remove all references to SEXT7.
1436 (OP_300, OP_400, OP_500, OP_380, OP_480, OP_501): Displacement
1437 is zero extended for sst/sld instructions.
1438 * v850_sim.h (SEX7): Delete. It's no longer needed (and it
1439 was incorrect anyway).
1441 Thu Oct 24 10:33:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1443 * Makefile.in: Get rid of srcroot. Set all INSTALL macros via
1445 * gencode.c (write_opcodes): Pad operands field to account for
1447 * simops.c: Include errno.h. Exclude SYS_chown, since MSVC
1448 doesn't support it. (Why is this here in the first place?!?)
1449 * v850_sim.h: Get rid of 64 bit defs. Also, get rid of #elif's.
1450 Change number of operands in struct simops from 9 to 6. Define
1451 SIGTRAP and SIGQUIT for MSVC.
1453 Tue Oct 15 16:19:51 1996 Stu Grossman (grossman@critters.cygnus.com)
1455 * interp.c (MEM_SIZE): It's now bytes, not a power of 2.
1456 * (map): Add support for external mem in the 1->2 meg range.
1457 Also, abort() when memory access is way out of bounds. (Better to
1458 die than to give wrong result. (This will be fixed later.))
1459 * (sim_size): MEM_SIZE is now bytes, not shift factor.
1461 Tue Oct 1 15:53:24 1996 Gavin Koch <gavin@cygnus.com>
1463 * simops.c (trace_input): Swapped order of operands for output
1464 output of OP_IMM_REG. Changed the fetching of the operands for
1465 OP_LOAD32, and OP_STORE32 to work like op-function.
1467 Mon Sep 30 15:46:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1469 * interp.c: Move includes of remote-sim.h and callback.h to
1471 * (lookup_hash): Add PC to report of hash failure.
1472 * (map load_mem store_mem): New memory subsystem. Models V851
1474 * (sim_write sim_read): Use new memory subsystem.
1475 * (sim_resume): Don't load and save PC into EIPC anymore. Needed
1476 to make user-defined traps work right.
1477 * simops.c (OP_*): Use new memory subsystem.
1478 * (OP_14007E0 (reti)): Implement reti.
1479 * (OP_14996E0 (trap)): Implement user-defined traps. Move I/O to
1480 trap 31. Use new memory subsystem.
1481 * v850_sim.h: Prototypes for load_mem, store_mem and map. Use
1482 load_mem in RLW macro.
1484 Fri Sep 27 18:34:09 1996 Stu Grossman (grossman@critters.cygnus.com)
1486 * gencode.c (write_opcodes): Output hex values for opcode mask
1488 * interp.c (sim_resume): Save and restore PC from the appropriate
1490 * (sim_fetch_register sim_store_register): Fix byte-order problem
1491 with reading and writing registers.
1492 * simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
1494 Fri Sep 27 17:42:37 1996 Jeffrey A Law (law@cygnus.com)
1496 * simops.c (trace_input): Fix thinko.
1498 Wed Sep 18 09:54:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1500 * simops.c (exec_bfd): Rename from sim_bfd.
1501 (trace_input): Ditto.
1503 Thu Sep 12 12:03:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1505 * simops.c (trace_input): Use find_nearest_line to print line
1506 number, function name or file name of PC.
1508 Wed Sep 11 16:44:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1510 * simops.c: Add tracing support. Use SEXTxx macros instead of
1511 doing hardwired shifts.
1513 * configure.in (--enable-sim-cflags): Add switch to add additional
1514 flags to simulator buld. If --enable-sim-cflags=trace, turn on
1516 * configure: Regenerate.
1518 * Makefile.in: Don't require a VPATH capable make if configuring
1519 in the same directory. Don't use CFLAGS for configuration flags.
1520 Add flags from --enable-sim-cflags. Support canadian cross
1521 builds. Rebuild whole simulator if include files change.
1523 * interp.c (v850_debug): New global for debugging.
1524 (lookup_hash,sim_size,sim_set_profile): Use
1525 printf_filtered callback, instead of calling printf directly.
1526 (sim_{open,trace}): Enable tracing if -t and compiled for tracing.
1528 * v850_sim.h: Use limits.h to set the various sized types.
1529 (SEXT{5,7,16,22}): New macros.
1531 Mon Sep 9 20:50:46 1996 Jeffrey A Law (law@cygnus.com)
1533 * interp.c (hash): Make this an inline function
1534 when compiling with GCC. Simplify.
1535 * simpos.c: Explicitly include "sys/syscall.h". Remove
1536 some #if 0'd code. Enable more emulated syscalls.
1538 Wed Sep 4 01:48:55 1996 Jeffrey A Law (law@cygnus.com)
1540 * interp.c: Fix sign bit handling for add and sub instructions.
1542 Tue Sep 3 10:20:30 1996 Jeffrey A Law (law@cygnus.com)
1544 * gencode.c: Fix various indention & style problems.
1545 Remove test code. Remove #if 0 code.
1546 * interp.c: Provide prototypes for all static functions.
1547 Fix minor indention problems.
1548 (sim_open, sim_resume): Remove unused variables.
1549 (sim_read): Return type is "int".
1550 * simops.c: Remove unused variables.
1551 (divh): Make result of divide-by-zero zero.
1552 (setf): Initialize result to keep compiler quiet.
1553 (sar instructions): These just clear the overflow bit.
1554 * v850_sim.h: Provide prototypes for put_byte, put_half
1557 * interp.c: OP should be an array of 32bit operands!
1558 (v850_callback): Declare.
1559 (do_format_5): Fix extraction of OP[0].
1560 (sim_size): Remove debugging printf.
1561 (sim_set_callbacks): Do something useful.
1562 (sim_stop_reason): Gross hacks to get c-torture running.
1563 * simops.c: Simplify code for computing targets of bCC
1564 insns. Invert 's' bit if 'ov' bit is set for some
1565 instructions. Fix 'cy' bit handling for numerous
1566 instructions. Make the simulator stop when a halt
1567 instruction is encountered. Very crude support for
1568 emulated syscalls (trap 0).
1569 * v850_sim.h: Include "callback.h" and declare
1570 v850_callback. Items in the operand array are 32bits.
1572 Sun Sep 1 22:35:35 1996 Jeffrey A Law (law@cygnus.com)
1574 * interp.c (sim_resume): Fix code to check for a format 3
1576 * simops.c: bCC insns only argument is a constant, not a
1577 register value (duh...)
1579 Fri Aug 30 10:33:49 1996 Jeffrey A Law (law@cygnus.com)
1581 * simops.c: Fix "not1" and "set1".
1583 * simops.c: Don't forget to initialize temp for
1586 * interp.c: Remove various debugging printfs.
1588 * simops.c: Fix satadd, satsub boundary case handling.
1590 * interp.c (hash): Fix.
1591 * interp.c (do_format_8): Get operands correctly and
1592 call the target function.
1593 * simops.c: Rough cut at "clr1", "not1", "set1", and "tst1".
1595 Thu Aug 29 13:53:29 1996 Jeffrey A Law (law@cygnus.com)
1597 * interp.c (do_format_4): Get operands correctly and
1598 call the target function.
1599 * simops.c: Rough cut at "sld.b", "sld.h", "sld.w", "sst.b",
1600 "sst.h", and "sst.w".
1602 * v850_sim.h: The V850 doesn't have split I&D spaces. Change
1603 accordingly. Remove many unused definitions.
1604 * interp.c: The V850 doesn't have split I&D spaces. Change
1606 (get_longlong, get_longword, get_word): Deleted.
1607 (write_longlong, write_longword, write_word): Deleted.
1608 (get_operands): Deleted.
1609 (get_byte, get_half, get_word): New functions.
1610 (put_byte, put_half, put_word): New functions.
1611 * simops.c: Remove unused functions. Rough cut at
1612 "ld.b", "ld.h", "ld.w", "st.b", "st.h", "st.w" insns.
1614 * v850_sim.h (struct _state): Remove "psw" field. Add
1616 (PSW): Remove bogus definition.
1617 * simops.c: Change condition code handling to use the psw
1618 register within the sregs array. Handle "ldsr" and "stsr".
1620 * simops.c: Handle "satadd", "satsub", "satsubi", "satsubr".
1622 * interp.c (do_format_5): Get operands correctly and
1623 call the target function.
1624 (sim_resume): Don't do a PC update for format 5 instructions.
1625 * simops.c: Handle "jarl" and "jmp" instructions.
1627 * simops.c: Fix minor typos. Handle "cmp", "setf", "tst"
1628 "di", and "ei" instructions correctly.
1630 * interp.c (do_format_3): Get operands correctly and call
1631 the target function.
1632 * simops.c: Handle bCC instructions.
1634 * simops.c: Add condition code handling to shift insns.
1635 Fix minor typos in condition code handling for other insns.
1637 * Makefile.in: Fix typo.
1638 * simops.c: Add condition code handling to "sub" "subr" and
1639 "divh" instructions.
1641 * interp.c (hash): Update to be more accurate.
1642 (lookup_hash): Call hash rather than computing the hash
1644 (do_format_1_2): Handle format 1 and format 2 instructions.
1645 Get operands correctly and call the target function.
1646 (do_format_6): Get operands correctly and call the target
1648 (do_formats_9_10): Rough cut so shift ops will work.
1649 (sim_resume): Tweak to deal with format 1 and format 2
1650 handling in a single funtion. Don't update the PC
1651 for format 3 insns. Fix typos.
1652 * simops.c: Slightly reorganize. Add condition code handling
1653 to "add", "addi", "and", "andi", "or", "ori", "xor", "xori"
1654 and "not" instructions.
1655 * v850_sim.h (reg_t): Registers are 32bits.
1656 (_state): The V850 has 32 general registers. Add a 32bit
1657 psw and pc register too. Add accessor macros
1659 * Makefile.in, interp.c, v850_sim.h: Bring over endianness
1660 changes from the d10v simulator.
1662 * simops.c: Add shift support.
1664 * simops.c: Add multiply & divide support. Abort for system
1667 * simops.c: Add logicals, mov, movhi, movea, add, addi, sub
1668 and subr. No condition codes yet.
1670 Wed Aug 28 13:53:22 1996 Jeffrey A Law (law@cygnus.com)
1672 * ChangeLog, Makefile.in, configure, configure.in, v850_sim.h,
1673 gencode.c, interp.c, simops.c: Created.