1 2016-01-10 Mike Frysinger <vapier@gentoo.org>
3 * configure: Regenerate.
5 2016-01-10 Mike Frysinger <vapier@gentoo.org>
7 * configure: Regenerate.
9 2016-01-09 Mike Frysinger <vapier@gentoo.org>
11 * config.in, configure: Regenerate.
13 2016-01-06 Mike Frysinger <vapier@gentoo.org>
15 * interp.c (sim_open): Mark argv const.
16 (sim_create_inferior): Mark argv and env const.
18 2016-01-04 Mike Frysinger <vapier@gentoo.org>
20 * configure: Regenerate.
22 2016-01-03 Mike Frysinger <vapier@gentoo.org>
24 * interp.c (sim_open): Update sim_parse_args comment.
26 2016-01-03 Mike Frysinger <vapier@gentoo.org>
28 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
29 * configure: Regenerate.
31 2016-01-02 Mike Frysinger <vapier@gentoo.org>
33 * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
35 * configure: Regenerate.
37 2015-12-30 Mike Frysinger <vapier@gentoo.org>
39 * wrapper.c (v850_reg_store, v850_reg_fetch): Define.
40 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
41 (sim_store_register): Rename to ...
42 (v850_reg_store): ... this.
43 (sim_fetch_register): Rename to ...
44 (v850_reg_fetch): ... this.
46 2015-12-27 Mike Frysinger <vapier@gentoo.org>
48 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
50 2015-12-26 Mike Frysinger <vapier@gentoo.org>
52 * config.in, configure: Regenerate.
54 2015-12-24 Mike Frysinger <vapier@gentoo.org>
56 * sim-main.h (WITH_WATCHPOINTS): Delete.
58 2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com>
60 * simops.c (v850_bins): Fix left shift of negative value.
62 2015-11-17 Mike Frysinger <vapier@gentoo.org>
64 * sim-main.h (WITH_CORE): Delete.
66 2015-11-17 Mike Frysinger <vapier@gentoo.org>
68 * sim-main.h (WITH_MODULO_MEMORY): Delete.
70 2015-11-15 Mike Frysinger <vapier@gentoo.org>
72 * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
74 2015-11-14 Mike Frysinger <vapier@gentoo.org>
76 * interp.c (sim_close): Delete.
78 2015-06-23 Mike Frysinger <vapier@gentoo.org>
80 * configure: Regenerate.
82 2015-06-12 Mike Frysinger <vapier@gentoo.org>
84 * configure: Regenerate.
86 2015-06-12 Mike Frysinger <vapier@gentoo.org>
88 * configure: Regenerate.
90 2015-06-11 Mike Frysinger <vapier@gentoo.org>
92 * interp.c (INLINE): Delete define.
94 2015-04-18 Mike Frysinger <vapier@gentoo.org>
96 * sim-main.h (SIM_CPU): Delete.
98 2015-04-18 Mike Frysinger <vapier@gentoo.org>
100 * sim-main.h (sim_cia): Delete.
102 2015-04-17 Mike Frysinger <vapier@gentoo.org>
104 * sim-main.h (CIA_GET, CIA_SET): Delete.
106 2015-04-15 Mike Frysinger <vapier@gentoo.org>
108 * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
109 * sim-main.h (STATE_CPU): Delete.
111 2015-04-13 Mike Frysinger <vapier@gentoo.org>
113 * configure: Regenerate.
115 2015-04-13 Mike Frysinger <vapier@gentoo.org>
117 * Makefile.in (SIM_OBJS): Add sim-cpu.o.
118 * interp.c (v850_pc_get, v850_pc_set): New functions.
119 (sim_open): Declare new local var i. Call sim_cpu_alloc_all.
120 Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
121 (sim_pc_get): Delete.
122 * sim-main.h (SIM_CPU): Define.
123 (struct sim_state): Change cpu to an array of pointers.
126 2015-04-06 Mike Frysinger <vapier@gentoo.org>
128 * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
130 2015-03-31 Mike Frysinger <vapier@gentoo.org>
132 * config.in, configure: Regenerate.
134 2015-03-24 Mike Frysinger <vapier@gentoo.org>
136 * interp.c (sim_pc_get): New function.
138 2015-03-16 Mike Frysinger <vapier@gentoo.org>
140 * config.in, configure: Regenerate.
142 2015-03-14 Mike Frysinger <vapier@gentoo.org>
144 * Makefile.in (SIM_RUN_OBJS): Delete.
146 2015-03-14 Mike Frysinger <vapier@gentoo.org>
148 * configure.ac (AC_CHECK_HEADERS): Delete unistd.h & stdlib.h &
149 string.h & strings.h & time.h.
150 * aclocal.m4, configure: Regenerate.
152 2015-02-27 Nick Clifton <nickc@redhat.com>
154 * sim-main.h (reg64_t): New type.
155 (v850_regs): Add selID_sregs field.
156 (VR, SAT16, SAT32, ABS16, ABS32 ): New macros.
157 * v850-dc: Add fields for v850e3v5 instructions.
158 * v850.igen (cvtf.dl): Use correctly signed local value.
159 (cvtf.dw, cvtf.sw, trncf.dul, trncf.dl, trncf.sul, trncf.sw):
161 * interp.c: Fix old style function declarations.
162 * simops.c: Likewise.
164 2015-02-24 Nick Clifton <nickc@redhat.com>
166 * v850.igen: Add more e3v5 support.
167 (FMAF.S): New pattern.
168 (FMSF.S): New pattern.
169 (FNMAF.S): New pattern.
170 (FNMSF.S): New pattern.
171 (cnvq15q30): New pattern.
172 (cnvq30q15): New pattern.
173 (cnvq31q62): New pattern.
174 (cnvq62q31): New pattern.
175 (dup.h): New pattern.
176 (dup.w): New pattern.
177 (expq31): New pattern.
178 (modadd): New pattern.
179 (mov.dw): New pattern.
180 (mov.h): New pattern.
181 (mov.w): New pattern.
182 (pki16i32): New pattern.
183 (pki16ui8): New pattern.
184 (pki32i16): New pattern.
185 (pki64i32): New pattern.
186 (pkq15q31): New pattern.
187 (pkq30q31): New pattern.
188 (pkq31q15): New pattern.
189 (pkui8i16): New pattern.
190 (vabs.h): New pattern.
191 (vabs.w): New pattern.
192 (vadd.dw): New placeholder pattern.
193 (vadd.h): New placeholder pattern.
194 (vadd.w): New placeholder pattern.
195 (vadds.h): New placeholder pattern.
196 (vadds.w): New placeholder pattern.
197 (vaddsat.h): New placeholder pattern.
198 (vaddsat.w): New placeholder pattern.
200 (vbiq.h): New placeholder pattern.
201 (vbswap.dw): New placeholder pattern.
202 (vbswap.h): New placeholder pattern.
203 (vbswap.w): New placeholder pattern.
204 (vcalc.h): New placeholder pattern.
205 (vcalc.w): New placeholder pattern.
206 (vcmov): New placeholder pattern.
208 2014-08-19 Alan Modra <amodra@gmail.com>
210 * configure: Regenerate.
212 2014-08-15 Roland McGrath <mcgrathr@google.com>
214 * configure: Regenerate.
215 * config.in: Regenerate.
217 2014-03-04 Mike Frysinger <vapier@gentoo.org>
219 * configure: Regenerate.
221 2013-09-23 Alan Modra <amodra@gmail.com>
223 * configure: Regenerate.
225 2013-06-03 Mike Frysinger <vapier@gentoo.org>
227 * aclocal.m4, configure: Regenerate.
229 2013-05-13 Nick Clifton <nickc@redhat.com>
231 * v850.igen (LDSR): Accept but ignore a selID parameter.
233 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
235 * configure: Rebuild.
237 2013-01-28 Nick Clifton <nickc@redhat.com>
239 * simops.c (v850_rotl): New function.
240 (v850_bins): New function.
241 * simops.h: Add prototypes fir v850_rotl and v850_bins.
242 * v850-dc: Add entries for V850e3v5.
243 * v850.igen: Add support for v850e3v5.
244 (ld.dw, st.dw, rotl, bins): New patterns.
246 2013-01-10 Nick Clifton <nickc@redhat.com>
248 * interp.c (sim_open): Add support for bfd_arch_v850_rh850
249 architecture type. Add support for bfd_mach_v850e2 and
250 bfd_mach_v850e2v3 machine numbers.
251 * v850.igen (dbtrap): Add support for SIM_OPEN_DEBUG.
252 (cmpf.d): Correct order of operands.
254 (trncf.dul): New pattern.
255 (trncf.duw): New pattern.
256 (trncf.sul): New pattern.
257 (trncf.suw): New pattern.
258 * v850-dc: Correct bitfield selection for TRNCF.SW and CVTF.SW.
260 2012-09-13 Nick Clifton <nickc@redhat.com>
262 * v850.igen (W,WWWW): Correct computation of register number.
263 (JR32): Remove unnecessary comma.
264 (cmovf.s): Register 0 is an invalid source register.
265 (maddf.s): Remove bogus intermediary rounding.
266 (nmaddf.s): Likewise.
267 (trncf.sl): Remove bogus initial rounding.
268 (trncf.dw): Likewise.
269 (trncf.sl): Likewise.
270 (trncf.sw): Likewise.
272 2012-06-15 Joel Brobecker <brobecker@adacore.com>
274 * config.in, configure: Regenerate.
276 2012-03-28 Rathish C <rathish.c@kpitcummins.com>
278 * sim-main.h (struct _v850_regs): Add new fields mpu0_sregs,
279 mpu1_sregs, and fpu_sregs.
280 (MPU0_SR, MPU1_SR, FPU_SR): New macros for accessing new fields
281 in _v850_regs struct.
283 (SP): Redefine using SP_REGNO.
284 (PSW_REGNO, EIIC, FEIC, DBIC, DIR, EIWR, FEWR, DBWR, BSEL, PSW_NPV)
285 (PSW_DMP, PSW_IMP, ECR_EICC, ECR_FECC, FPSR, FPSR_REGNO, FPEPC)
286 (FPST, FPST_REGNO, FPCC, FPCFG, FPCFG_REGNO, FPSR_DEM, FPSR_SEM)
287 (FPSR_RM, FPSR_RN, FPSR_FS, FPSR_PR, FPSR_XC, FPSR_XCE, FPSR_XCV)
288 (FPSR_XCZ, FPSR_XCO, FPSR_XCU, FPSR_XCI, FPSR_XE, FPSR_XEV)
289 (FPSR_XEZ, FPSR_XEO, FPSR_XEU, FPSR_XEI, FPSR_XP, FPSR_XPV)
290 (FPSR_XPZ, FPSR_XPO, FPSR_XPU, FPSR_XPI, FPST_PR, FPST_XCE)
291 (FPST_XCV, FPST_XCZ, FPST_XCO, FPST_XCU, FPST_XCI, FPST_XPV)
292 (FPST_XPZ, FPST_XPO, FPST_XPU, FPST_XPI, FPCFG_RM, FPCFG_XEV)
293 (FPCFG_XEZ, FPCFG_XEO, FPCFG_XEU, FPCFG_XEI, GET_FPCC, CLEAR_FPCC)
294 (SET_FPCC, TEST_FPCC, FPSR_GET_ROUND, MPM, MPC, MPC_REGNO, TID)
295 (PPA, PPM, PPC, DCC, DCV0, DCV1, SPAL, SPAU, IPA0L, IPA0U, IPA1L)
296 (IPA1U, IPA2L, IPA2U, IPA3L, IPA3U, DPA0L, DPA0U, DPA1L, DPA1U)
297 (DPA2L, DPA2U, DPA3L, DPA3U, PPC_PPE, SPAL_SPE, SPAL_SPS, VIP)
298 (VMECR, VMTID, VMADR, VPECR, VPTID, VPADR, VDECR, VDTID, MPM_AUE)
299 (MPM_MPE, VMECR_VMX, VMECR_VMR, VMECR_VMW, VMECR_VMS, VMECR_VMRMW)
300 (VMECR_VMMS, IPA2ADDR, IPA_IPE, IPA_IPX, IPA_IPR, IPE0, IPE1, IPE2)
301 (IPE3, IPX0, IPX1, IPX2, IPX3, IPR0, IPR1, IPR2, IPR3, DPA2ADDR)
302 (DPA_DPE, DPA_DPR, DPA_DPW, DPE0, DPE1, DPE2, DPE3, DPR0, DPR1)
303 (DPR2, DPR3, DPW0, DPW1, DPW2, DPW3, DCC_DCE0, DCC_DCE1, PPA2ADDR)
304 (PPC_PPC, PPC_PPE, PPC_PPM): New macros.
305 (FPU_COMPARE): New enum.
306 (TRACE_FP_INPUT_FPU1, TRACE_FP_INPUT_FPU2, TRACE_FP_INPUT_FPU3)
307 (TRACE_FP_INPUT_BOOL1_FPU2, TRACE_FP_INPUT_WORD2)
308 (TRACE_FP_RESULT_WORD1, TRACE_FP_RESULT_WORD2): New macros.
309 * simops.c (Add32): Update prototype.
310 (update_fpsr): New function.
311 (SignalException): New function.
312 (SignalExceptionFPE): New function.
313 (check_invalid_snan): New function.
314 (v850_float_compare): New function.
315 (v850_div): New function.
316 (v850_divu): New function.
317 (v850_sar): New function.
318 (v850_shl): New function.
319 (v850_shr): New function.
320 (v850_satadd): New function.
321 (v850_satsub): New function.
322 (load_data_mem): New function.
323 (store_data_mem): New function.
324 (mpu_load_mem_test): New function.
325 (mpu_store_mem_test): New function.
326 * simops.h: Add function prototype for above mentioned functions.
327 (check_cvt_fi, check_cvt_if, check_cvt_ff): Define.
328 * v850-dc: Add entry for v850e2 and v850e2v3.
329 * v850.igen: Add support for v850e2 and v850e2v3.
331 2012-03-24 Mike Frysinger <vapier@gentoo.org>
333 * aclocal.m4, config.in, configure: Regenerate.
335 2011-12-03 Mike Frysinger <vapier@gentoo.org>
337 * aclocal.m4: New file.
338 * configure: Regenerate.
340 2011-10-17 Mike Frysinger <vapier@gentoo.org>
342 * configure.ac: Change include to common/acinclude.m4.
344 2011-10-17 Mike Frysinger <vapier@gentoo.org>
346 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
347 call. Replace common.m4 include with SIM_AC_COMMON.
348 * configure: Regenerate.
350 2011-07-05 Mike Frysinger <vapier@gentoo.org>
352 * interp.c (sim_do_command): Delete.
354 2011-03-21 Kevin Buettner <kevinb@redhat.com>
356 * simops (OP_10007E0): Update errno handling as most traps
357 do not invoke the host's functionality directly. Invoke
358 sim_io_stat() instead of stat() for implementing TARGET_SYS_stat.
359 Implement TARGET_SYS_fstat, TARGET_SYS_rename, and TARGET_SYS_unlink.
361 2011-02-14 Mike Frysinger <vapier@gentoo.org>
363 * simops.c (OP_10007E0): Change zfree to free.
365 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
367 * interp.c (sim_store_register): Update return value to
370 2010-03-30 Mike Frysinger <vapier@gentoo.org>
372 * interp.c (interrupt_names): Add const to pointer type.
373 (do_interrupt): Add const to interrupt_name.
375 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
377 * configure: Regenerate.
379 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
381 * config.in: Regenerate.
382 * configure: Likewise.
384 * configure: Regenerate.
386 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
388 * configure: Regenerate to track ../common/common.m4 changes.
391 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
392 Daniel Jacobowitz <dan@codesourcery.com>
393 Joseph Myers <joseph@codesourcery.com>
395 * configure: Regenerate.
397 2008-02-05 DJ Delorie <dj@redhat.com>
399 * simops.c (OP_1C007E0): Compensate for 64 bit hosts.
400 (OP_18007E0): Likewise.
401 (OP_2C007E0): Likewise.
402 (OP_28007E0): Likewise.
403 * v850.igen (divh): Likewise.
405 * simops.c (OP_C0): Correct saturation logic.
411 * simops.c (OP_2A0): If the shift count is zero, clear the
413 (OP_A007E0): Likewise.
415 (OP_C007E0): Likewise.
417 (OP_8007E0): Likewise.
419 * simops.c (OP_2C207E0): Correct PSW flags for special divu
421 (OP_2C007E0): Likewise, for div.
422 (OP_28207E0): Likewise, for divhu.
423 (OP_28007E0): Likewise, for divh. Also, sign-extend the correct
425 * v850.igen (divh): Likewise, for 2-op divh.
427 * v850.igen (bsh): Fix carry logic.
429 2007-02-20 Daniel Jacobowitz <dan@codesourcery.com>
431 * Makefile.in (interp.o): Uncomment and update.
433 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
435 * acconfig.h: Remove.
436 * config.in: Regenerate.
438 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
440 * configure: Regenerated.
442 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
444 * configure: Regenerated.
446 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
448 * configure: Regenerated.
450 2005-03-23 Mark Kettenis <kettenis@gnu.org>
452 * configure: Regenerate.
454 2005-01-14 Andrew Cagney <cagney@gnu.org>
456 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
457 explicit call to AC_CONFIG_HEADER.
458 * configure: Regenerate.
460 2005-01-12 Andrew Cagney <cagney@gnu.org>
462 * configure.ac: Update to use ../common/common.m4.
463 * configure: Re-generate.
465 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
467 * configure: Regenerated to track ../common/aclocal.m4 changes.
469 2005-01-07 Andrew Cagney <cagney@gnu.org>
471 * configure.ac: Rename configure.in, require autoconf 2.59.
472 * configure: Re-generate.
474 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
476 * configure: Regenerate for ../common/aclocal.m4 update.
478 2004-01-18 Mark Kettenis <kettenis@gnu.org>
480 * simops.c: Include <sys/types.h>.
482 2003-09-05 Andrew Cagney <cagney@redhat.com>
483 Nick Clifton <nickc@redhat.com>
485 * interp.c (sim_open): Accept bfd_mach_v850e1.
486 * v850-dc: Add entry for v850e1.
487 * v850.igen: Add support for v850e1.
488 Add code for DBTRAP and DBRET instructions.
489 (dbtrap): Create a separate v850e1 specific instruction.
490 Only generate a trap if the target is not the v850e1.
491 Otherwise treat it as a special kind of branch.
492 (break): Mark as v850/v850e specific.
494 2003-05-16 Ian Lance Taylor <ian@airs.com>
496 * Makefile.in (SHELL): Make sure this is defined.
497 (tmp-igen): Use $(SHELL) whenever we invoke move-if-change.
499 2003-04-06 Nick Clifton <nickc@redhat.com>
501 * simops.c (OP_40): Delete. Move code to...
502 * v850-igen.c (): ...Here. Sign extend the first operand.
503 * simops.h (OP_40): Remove prototype.
505 2003-02-27 Andrew Cagney <cagney@redhat.com>
507 * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
509 2002-11-30 Andrew Cagney <cagney@redhat.com>
511 * simops.c: Use int, 1, 0 instead of boolean, true and false.
514 2002-09-27 Jim Wilson <wilson@redhat.com>
516 * simops.c (OP_E6077E0): And op1 with 7 after reading register, not
518 (BIT_CHANGE_OP): Likewise.
520 2002-09-26 Jim Wilson <wilson@redhat.com>
522 * simops (OP_10007E0): Don't subtract 4 from PC.
524 2002-09-19 Nick Clifton <nickc@redhat.com>
526 * interp.c (sim_open): Remove reference to v850ea.
527 (sim_create_inferior): Likewise.
529 * v850.igen: Remove all references to v850ea, including v850ea
530 specific instructions.
532 2002-08-29 Nick Clifton <nickc@redhat.com>
534 From 2001-08-23 Catherine Moore <clm@redhat.com>
536 * Makefile.in: Add gen-zero-r0 option.
537 * sim-main.h (GPR_SET, GPR_CLEAR): Define.
538 * simops.c (OP_24007E0): Sign extend the imm9
539 operand of a mul instruction.
541 2002-06-17 Andrew Cagney <cagney@redhat.com>
543 * simops.c (trace_result): Fix printf formatting.
545 2002-06-16 Andrew Cagney <ac131313@redhat.com>
547 * configure: Regenerated to track ../common/aclocal.m4 changes.
549 2001-12-02 Andrew Cagney <ac131313@redhat.com>
551 * Makefile.in (simops.h, table.c): Delete targets.
552 (tmp-gencode, gencode.o, gencode): Delete targets.
553 (simops.h): New file.
554 ($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
555 * gencode.c: Delete file.
557 2001-04-15 J.T. Conklin <jtc@redback.com>
559 * Makefile.in (simops.o): Add simops.h to dependency list.
561 2001-03-14 Andrew Cagney <ac131313@redhat.com>
563 * Makefile.in (gencode): Link with libintl.
565 2001-01-31 Jonathan Larmour <jlarmour@redhat.com>
567 * Makefile.in (gencode): Link with libopcodes in build tree rather
568 than building source files from there.
570 2000-05-30 Nick Clifton <nickc@cygnus.com>
572 * v850.igen: Remove illegal instruction pattern, since it is the
573 same as the breakpoint pattern.
575 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
577 * configure: Regenerated to track ../common/aclocal.m4 changes.
579 2000-04-14 Gary Thomas <gthomas@redhat.com>
581 * v850.igen: Define 'br *' as illegal since this is the only
582 way to provide a breakpoint on some v850 family processors.
584 2000-03-24 Frank Ch. Eigler <fche@redhat.com>
586 * v850.igen (ilgop): New insn pattern for four-byte breakpoints.
588 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
590 * configure: Regenerated to track ../common/aclocal.m4 changes.
592 1999-05-08 Felix Lee <flee@cygnus.com>
594 * configure: Regenerated to track ../common/aclocal.m4 changes.
596 Tue Dec 1 17:25:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
598 * Makefile.in (NL_TARGET): Define as -DNL_TARGET_v850.
600 Wed Nov 25 17:52:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
602 * Makefile.in (simops.o): Depends on targ-vals.h
603 * simops.c: Include targ-vals.h instead of
604 libgloss/.../syscall.h. Replace SYS_* with TARGET_SYS_*.
605 (divn, divun, OP_1C007E0, OP_18207E0, OP_1C207E0,OP_18007E0):
606 Replace signed long int with signed32.
608 Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com>
610 * interp.c: #include "itable.h".
611 (get_insn_name): New function.
612 (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
613 * sim-main.h (MAX_INSNS,INSN_NAME): Delete.
615 Wed May 6 19:43:27 1998 Doug Evans <devans@canuck.cygnus.com>
617 * sim-main.h (INSN_NAME): New arg `cpu'.
619 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
621 * configure: Regenerated to track ../common/aclocal.m4 changes.
623 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
625 * configure: Regenerated to track ../common/aclocal.m4 changes.
628 Sun Apr 26 15:19:14 1998 Tom Tromey <tromey@cygnus.com>
630 * acconfig.h: New file.
631 * configure.in: Reverted change of Apr 24; use sinclude again.
633 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
635 * configure: Regenerated to track ../common/aclocal.m4 changes.
638 Fri Apr 24 11:18:08 1998 Tom Tromey <tromey@cygnus.com>
640 * configure.in: Don't call sinclude.
642 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
644 * configure: Regenerated to track ../common/aclocal.m4 changes.
645 * sim-main.h (SIM_MAIN_H): Wrap header.
647 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
649 * configure: Regenerated to track ../common/aclocal.m4 changes.
651 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
653 * configure: Regenerated to track ../common/aclocal.m4 changes.
655 Tue Mar 10 15:54:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
657 * interp.c (sim_stop): Delete, second attempt.
659 Thu Feb 26 19:09:47 1998 Andrew Cagney <cagney@b1.cygnus.com>
661 * interp.c (sim_info): Delete.
663 Wed Feb 18 10:47:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
665 * sim-main.h (TRACE_ALU_INPUT*): Delete. Moved to sim-trace.[hc].
667 * simops.c (trace_result): Call trace_generic instead of
669 (trace_module): Change variable type to integer.
670 (trace_input): Initialize trace_module with TRACE_ALU_IDX.
672 * sim-main.h (trace_module): Change variable decl to integer type.
673 (TRACE_BRANCH*, TRACE_LD, TRACE_ST): Update.
675 Tue Feb 17 12:51:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
677 * interp.c (sim_store_register, sim_fetch_register): Pass in
678 length parameter. Return -1.
680 Tue Feb 3 16:24:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
682 * sim-main.h (IMEM16, IMEM16_IMMED): Rename IMEM and
683 IMEM_IMMED. To match recent igen change.
685 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
687 * configure: Regenerated to track ../common/aclocal.m4 changes.
689 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
691 * configure: Regenerated to track ../common/aclocal.m4 changes.
693 Fri Jan 30 09:51:27 1998 Andrew Cagney <cagney@b1.cygnus.com>
695 * sim-main.h (CPU_CIA): Delete, replaced by.
696 (CIA_SET, CIA_SET): Define.
698 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
700 * configure: Regenerated to track ../common/aclocal.m4 changes.
702 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
704 * configure: Regenerated to track ../common/aclocal.m4 changes.
707 Fri Dec 5 09:26:08 1997 Nick Clifton <nickc@cygnus.com>
709 * v850.igen: Revert break value back to its old value.
711 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
713 * configure: Regenerated to track ../common/aclocal.m4 changes.
715 Wed Dec 3 17:27:19 1997 Nick Clifton <nickc@cygnus.com>
717 * v850.igen: Make break have a zero first field, since otherwise
718 it clashes with the DIVH instruction.
720 Sat Nov 22 21:32:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
722 * simops.c (OP_10007E0): Rename SIGABRT -> SIM_SIGABRT. Give
723 sim_stopped instead of sim_signalled.
725 * v850.igen (BREAK), simops.c (OP_12007E0): Rename SIGTRAP to
727 (illegal): Rename SIGILL to SIM_SIGILL.
729 * sim-main.h, simops.c, interp.c: Do not include signal.h.
731 * sim-main.h: Include sim-signal.h instead of signal.h.
732 (SIGTRAP, SIGQUIT): Delete definition.
733 (SIG_V850_EXIT): Delete definition.
735 Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com>
737 * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS).
739 Fri Oct 31 10:33:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
741 * interp.c (sim_open): Check state magic number.
742 (sim-assert.h): Include.
744 Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
746 * v850.igen: Add model filter field to records.
748 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
750 * configure: Regenerated to track ../common/aclocal.m4 changes.
752 Fri Sep 26 11:56:02 1997 Felix Lee <flee@cygnus.com>
754 * sim-main.h: delete null override of SIM_ENGINE_HALT_HOOK and
755 SIM_ENGINE_RESTART_HOOK.
757 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
759 * configure: Regenerated to track ../common/aclocal.m4 changes.
761 Wed Sep 24 17:28:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
763 * sim-main.h (WITH_TARGET_WORD_MSB): Delete.
765 * configure.in (SIM_AC_OPTION_BITSIZE): Specify 32 bit
766 architecture with MSB == 31.
768 Wed Sep 24 14:04:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
770 * v850.igen: Make divh insn with RRRRR==0 breakpoint.
772 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
774 * configure: Regenerated to track ../common/aclocal.m4 changes.
776 Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
778 * Makefile.in (SIM_WARNINGS, SIM_ALIGNMENT, SIM_ENDIAN,
779 SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common.
780 (SIM_EXTRA_CFLAGS): Update.
782 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
784 * configure: Regenerated to track ../common/aclocal.m4 changes.
785 * configure.in: Really specify NONSTRICT_ALIGNMENT as the default.
787 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
789 * configure.in: Specify NONSTRICT_ALIGNMENT as the default.
790 * configure: Regenerated to track ../common/aclocal.m4 changes.
792 Fri Sep 19 10:37:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
794 * v850.igen (disp16): Use EXTEND16 to sign extend disp.
795 (disp22): Only shift left by 1, not 2.
796 ("jmp"): Ensure PC is 2 byte aligned.
798 * simops.c, v850.igen: Move "Bcond", "jr", "jarl" code to
799 v850.igen. Fix tracing.
801 * simops.c (OP_300, OP_400, OP_500): Move "sdl.b", "sld.h",
802 "sld.w" insns to v850.igen. Fix tracing.
803 (OP_70): Ditto for "sld.hu".
805 * v850.igen: Clarify tracing of "sld.b", "sld.h" et.al.
807 * simops.c (condition_met): Make global.
809 * sim-main.h (TRACE_ALU_INPUT3, TRACE_BRANCH0, TRACE_LD,
811 (TRACE_LD_NAME): Define.
813 * simops.c: Move "cmov", "cmov imm" to v850.igen, fix.
815 Wed Sep 17 16:21:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
817 * simops.c: Move "mov", "reti", to v850.igen, fix tracing.
819 * interp.c (hash): Delete.
821 * v850.igen (nop): Really do nothing.
823 * interp.c (do_interrupt): Mask interrupts after PSW is saved, not
825 * v850.igen (reti): Return to current PC not previous.
827 Wed Sep 17 14:02:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
829 * simops.c: Move "ctret", "bsw", "hsw" to v850.igen, fix tracing.
830 (trace_module): Global, save component/module name across insn.
832 * simops.c: Move "bsh" to v850.igen, fix.
834 * v850.igen (callt): Load correct number of bytes. Fix tracing.
835 (stsr, ldsr): Correct src, dest fields. Fix tracing.
836 (ctret): Force alignment. Fix tracing.
838 Tue Sep 16 22:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
840 * simops.c (trace_output): Add result argument.
841 (trace_result): New function. Simpler version of trace_output,
842 assumes trace needed.
843 (trace_output): Call trace_result.
844 (trace_output): For IMM_REG_REG, trace correct register.
845 (trace_input): Add case for 16bit immediates.
846 (OP_600, OP_640, OP_680, OP_6C0, OP_6A0): Use.
848 * sim-main.h (TRACE_ALU_INPUT, TRACE_ALU_RESULT): Define.
849 (trace_values, trace_name, trace_pc, trace_num_values): Make
853 v850.insn (movea, stsr): Use.
854 (sxb, sxh, zxb, zxh): Ditto.
856 Tue Sep 16 21:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
858 * simops.c: Move "movea" from here.
859 * v850.igen: To here.
861 * v850.igen (simm16): Define, sign extend imm16.
862 (uimm16): Define, no sign extension.
863 (addi, andi, movea, movhi, mulhi, ori, satsubi, xori): Use.
865 * simops.c: Move "sxh", "switch", "sxb", "callt", "dispose",
867 * v850.igen: To here.
868 (switch): Fix off by two error in NIA calc.
870 Tue Sep 16 15:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
872 * simops.c (trace_pc, trace_name, trace_values, trace_num_values):
874 (trace_input): Just save pc, name and values for trace_output.
875 (trace_output): Write trace values to a buffer. Use
876 trace_one_insn to print trace info and buffer.
877 (SIZE_OPERANDS, SIZE_LOCATION): Delete.
879 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
881 * sim-main.h (struct _sim_cpu): Add psw_mask so that reserved bits
884 * simops.c (OP_2007E0, OP_4007E0): Move "ldsr", "stsr"
885 instructions from here.
886 * v850.igen (ldsr, stsr): To here. Mask out reserved bits when
889 * interp.c (sim_open): Set psw_mask if machine known.
891 Tue Sep 16 10:20:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
893 * v850-dc: Add rule to diferentiate between breakpoint and divh.
894 * v850.igen (break): New instruction, breakpoint simulator.
895 * v850.igen (breakpoint): Enable. Change to a 32bit instruction.
897 Mon Sep 15 18:44:05 1997 Jim Wilson <wilson@cygnus.com>
899 * simops.c (Multiply64): Don't store into register zero.
901 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
903 * Makefile.in (semantics.o): Add dependency.
905 * sim-main.h (SAVE_1, SAVE_2): Perform backward compatible save,
906 do not adjust CIA/NIA.
908 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
910 * simops.c (OP_300, OP_400, OP_70): Make behavour depend on PSW[US].
912 * simops.c: Move "divun", "sld.bu", "divhn", "divhun", "divn",
913 "divun", "pushml" code from here to v850.igen.
914 (divun): Make global.
915 (type3_regs): Make global
917 * v850.igen: Move simops.c code to here.
919 * interp.c (sim_create_inferior): For v850eq set US bit by
922 * interp.c (sim_open): Don't set arch, now set by
925 * configure: Regenerated to track ../common/aclocal.m4 changes.
927 Mon Sep 15 14:39:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
929 * simops.c (op_types): Move from here.
932 * sim-main.h (trace_input, trace_output), simops.c: Make global.
934 * simops.c (OP_60): Move "jmp" code from here.
935 * v850.igen (jmp): To here.
937 * simops.c (OP_60): Move "sld.bu" code from here.
938 * v850.igen (sld.bu): To here.
940 Fri Sep 12 15:11:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
942 * v850.igen (prepare, ...): Add to v850eq architecture.
944 * interp.c (sim_open): Default to v850eq.
946 * interp.c (sim_open): Default to v850e.
947 * sim-main.h (signal.h): Include.
949 * v850.igen (illegal): Report/halt illegal instructions.
951 * Makefile.in (SIM_EXTRA_CFLAGS): Add SIM_RESERVED_BITS.
953 * configure.in: Add reserved bits option.
954 * configure: Regenerate.
956 Thu Sep 11 08:40:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
958 * interp.c (sim_open): Use sim_do_commandf instead of asprintf.
960 * sim-main.h (INSN_NAME):
962 * Makefile.in (INCLUDE): Add SIM_EXTRA_DEPS.
963 (SIM_EXTRA_DEPS): Add itable.h
964 (tmp-gencode): Does not depend on simops.h
966 * sim-main.h (itable.h): Include.
967 (MAX_INSNS, INSN_NAME): Define.
969 * interp.c: Compute inttype from the interrupt_names index that
972 Wed Sep 10 10:25:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
974 * simops.c (trace_input): Use trace_printf instead of
976 (trace_output): Ditto.
977 (trace_input): Only trace when TRACE_ALU_P. Delete code
978 disasembling instruction.
979 (trace_output): Only trace when TRACE_ALU_P.
981 Tue Sep 9 01:29:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
983 * simops.c (trace_input, trace_output): Use sim_io_printf.
984 (OP_620): Pass correct argument to trace.
986 (trace_input): Obtain prog_bfd, text_start et.al from simulator
989 Mon Sep 8 21:03:52 1997 Andrew Cagney <cagney@b1.cygnus.com>
991 * v850.igen: New file.
994 Mon Sep 8 18:33:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
997 * sim-main.h (SEXT16): Delete, use EXTEND16.
998 (SEXT8): Delete, use EXTEND8.
999 (SEXT32): Delete, used?
1000 (SEXT40, SEXT44, SEXT64): Use UNSIGNED64 for constants, not ...LL.
1001 (WITH_TARGET_WORD_MSB): Define as 31. v850 little bit endian.
1003 * simops.c: Use EXTEND15 from sim-bits instead of SEXT16.
1005 * sim-main.h (DEBUG_TRACE, DEBUG_VALUES, v850_debug): Delete,
1006 replace with TRACE_INSN_P and TRACE_ALU_P.
1008 * simops.c (trace_input, trace_output): Update.
1010 * interp.c (sim_engine_run): Delete.
1011 (lookup_hash): Delete.
1012 (sim_open): Do not fill hash table.
1013 (sim_trace): Delete.
1015 Fri Sep 5 17:04:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1017 * simops.c (OP_FFFF): Use sim_engine_halt.
1018 (OP_12007E0): Ditto.
1019 (OP_10007E0): Ditto.
1021 * sim-main.h (struct sim_cpu): Delete member exception. Using
1024 * interp.c (sim_info): Do not do anything in sim-info.
1025 (sim_stop): Delete, replace with sim-stop.
1026 (sim_stop_reason): Delete, replace with sim-reason.
1028 * sim-main.h (WITH_WATCHPOINTS): Define.
1029 (WITH_MODULO_MEMORY): Define
1031 * Makefile.in (SIM_OBJS): Add sim-resume, sim-watch, sim-stop,
1034 * interp.c (enum interrupt_cond_type): Delete.
1035 (struct interrupt_generator): Delete.
1036 (enum interrupt_type): Drop int_none.
1037 (sim_open): Initialize WATCHPOINT module.
1038 (sim_resume, sim_run): Rename sim_resume to sim_run.
1039 (sim_engine_run): Replace interrupt code with call to sim-events.
1040 (sim_set_interrupt): Delete.
1041 (sim_parse_number): Delete.
1043 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1045 * configure: Regenerated to track ../common/aclocal.m4 changes.
1047 Thu Sep 4 18:11:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
1049 * simops.c (fetch_argv): New function, fetch a arg vector from
1052 * configure.in: Check for fork, execve, execv.
1053 * configure: Regenerate.
1055 * interp.c (sim_store_register, sim_fetch_register): Use H2T_4 and
1056 T2H_4 for byte swapping.
1058 * sim-main.h, interp.c (get_word, get_half, get_byte, put_word,
1059 put_half, put_byte): Delete.
1061 * Makefile.in (SIM_OBJS): Add sim-memopt.o module.
1063 * sim-main.h (load_mem, store_mem): Redefine as macros.
1064 (IMEM, IMEM_IMMED): New macros - fetch instructions.
1066 * simops.c (OP_10007E0): For SYS_read, SYS_write, SYS_open
1067 transfer data via a buffer.
1068 (fetch_str): New function, fetch string from memory.
1070 * Makefile.in (SIM_OBJS): Add sim-hrw.o module.
1072 * interp.c (sim_open): Establish memory maps using sim-memopt.c
1074 (sim_do_command): Print error if memory-map command is used. Call
1076 (map): Delete, replaced by sim-core.
1077 (sim_memory_init): Delete, replaced by sim-core.
1078 (sim_set_memory_map): Delete, replaced by sim-memopt.
1079 (load_mem): Delete, replaced by sim-core.
1080 (store_mem): Delete, replaced by sim-core.
1081 (sim_write): Delete, replaced by sim-hrw.
1082 (sim_read): Delete, replaced by sim-hrw.
1084 * sim-main.h (struct sim_state): Remove memory members, using
1087 Wed Sep 3 10:18:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1089 * sim-main.h: Replace SIM_HAVE_FLATMEM with mem ptr.
1090 * interp.c (map): Do not add to a void pointer.
1092 * Makefile.in (INCLUDE): Add sim-main.h
1094 * configure.in: Check for time.h
1095 * configure: Re-generate.
1097 * interp.c (struct interrupt_generator): Make time unsigned long,
1099 (sim_resume): Make oldpc SIM_ADDR.
1100 (struct hash_entry): Make mask/opcode unsigned.
1102 * v850_sim.h (struct simops ): Make opcode and mask unsigned.
1104 * simops.c (utime.h): Include if available.
1105 (OP_10007E0): Check for UTIME function.
1106 (divun): Put parentheses around shift argument.
1107 (OP_640): Put parentheses around shift argument, was wrong.
1108 (OP_107F0): Return something.
1110 * interp.c (sim_parse_number): Use strtoul not strtol.
1111 (sim_resume): Use sim_elapsed_time_get to keep track of the time.
1113 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
1114 (SIM_AC_OPTION_ENDIAN): Set to hardwired big.
1115 (SIM_AC_OPTION_HOST_ENDIAN): Add.
1116 (AC_CHECK_FUNCS): Add utime.
1117 (AC_CHECK_HEADERS): Add stdlib.h, string.h, strings.h, utime.h
1118 configure: Regenerate.
1121 * Makefile.in (SIM_RUN_OBJS): Use nrun.o.
1122 (SIM_OBJS): Add sim-io.o, sim-hload.o, sim-utils.o, sim-options.o,
1123 sim-config.o, sim-module.o, sim-events.o, sim-core.o,
1124 sim-endian.o, sim-engine.o, sim-trace.o, sim-profile.o
1125 (SIM_ENDIAN, SIM_WARNGINS): Define.
1127 * simops.c (OP_10007E0): Use sim_io_* for transfers.
1129 * interp.c (sim_resume): Pass sd around.
1131 * simops.c (sim-main.h): Include.
1133 * gencode.c (write_template): Generate #include sim-main.h.
1134 (write_opcodes): Ditto.
1136 * interp.c (prog_bfd, prog_bfd_was_opened_p): Delete.
1137 (v850_callback): Ditto.
1138 (sim_kind, myname): Ditto.
1139 (lookup_hash): Pass SD. Use sim_io_error.
1140 (sim_set_memory_map): Pass in SD, use.
1141 (init_system): Pass in SD, use.
1143 (sim_set_profile): Delete.
1144 (sim_set_profile_size): Delete.
1145 (do_interrupt): Pass in SD, use.
1146 (sim_info): Use sim_io_printf.
1147 (sim_create_inferior): Reset registers. Set PC from prog_bfd
1149 (sim_load): Delete, use common/sim-hload.c
1150 (sim_size): Rename to sim_memory_init.
1151 (sim_write): Remove call to init_system.
1152 (init_system): Delete.
1153 (sim_set_callbacks): Delete.
1154 (sim_set_interrupt): Pass in SD, use.
1155 (start_time): Delete.
1157 * v850_sim.h: Remove everything except `struct simops' from here.
1158 * sim-main.h: Move most to here.
1159 * gencode.c: Move #includes to here.
1161 * sim-main.h(struct _sim_cpu): Rename struct _state.
1162 (#define PC, et.al.): Update
1163 (v850_callback): Delete. Replaced with SIM_DESC arg.
1164 (int8, uint8, int16, uint16, int32, uint32): Define types using
1165 unsigned8 et.al from common/sim-types.h.
1166 * sim-main.h (State): Define as STATE_CPU.
1168 Mon Sep 1 12:07:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1170 * configure.in: Check for time, chmod.
1171 * configure: Regenerate.
1172 * simops.c (SYS_time, SYS_chmod): Use HAVE_TIME, HAVE_CHMOD.
1174 * simops.c (../../libgloss/v850/sys/syscall.h): Include instead of
1176 (OP_10007E0): Check the existance each SYS_* macro independantly.
1178 * v850_sim.h (SIGQUIT, SIGTRAP): Only define if missing.
1180 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1182 * configure: Regenerated to track ../common/aclocal.m4 changes.
1185 Tue Aug 26 10:42:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1187 * interp.c (sim_kill): Delete.
1188 (sim_create_inferior): Add ABFD argument.
1189 (sim_load): Move setting of PC from here.
1190 (sim_create_inferior): To here.
1192 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1194 * configure: Regenerated to track ../common/aclocal.m4 changes.
1197 Mon Aug 25 11:31:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1199 * interp.c (sim_open): Add ABFD argument.
1201 Fri Aug 22 10:39:28 1997 Nick Clifton <nickc@cygnus.com>
1203 * simops.c (bsh): Only set CY flag if either of the bottom
1206 * simops.c (prepare, dispose): Lower numbered
1207 registers go to higher numbered address.
1209 * simops.c (unsigned divide instructions): S bit set if result has
1212 * simops.c (pushml, pushmh, popml, popmh): Lower numbered
1213 registers go to higher numbered address.
1215 Wed Aug 20 13:56:35 1997 Nick Clifton <nickc@cygnus.com>
1217 * simops.c (OP_107E0, OP_107F0, OP_307E0, OP_307F0): Use correct
1218 interpretation of SR bit in list18 structure.
1219 (divn, divun): New functions to perform N step divide functions.
1221 Mon Aug 18 10:59:02 1997 Nick Clifton <nickc@cygnus.com>
1223 * simops.c (OP_300, OP_400, OP_60, OP_70): Support variant opcodes
1224 with US bit set in the PSW.
1226 Wed Aug 13 19:06:55 1997 Nick Clifton <nickc@cygnus.com>
1228 * interp.c (sim_resume): Opcode functions return amount to be
1229 added to PC and all opcodes take a standard format in the OP[]
1232 (do_format_*): Functions removed.
1234 * v850_sim.h (SP, EP): New register mnemonics.
1236 * gencode.c (write_header): Functions prototypes return an
1239 * simops.c: Opcode functions return amount to be added to PC.
1241 * v850_sim.h (CTPC, CTPSW, CTBP): New register mnemonics.
1243 * simops.c: Add support for v850e instructions.
1245 * simops.c: Add support for v850eq instructions.
1247 Tue May 20 10:24:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1249 * interp.c (sim_open): Add callback argument.
1250 (sim_set_callbacks): Delete SIM_DESC argument.
1252 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1254 * configure: Regenerated to track ../common/aclocal.m4 changes.
1256 Wed Apr 23 17:20:16 1997 Doug Evans <dje@canuck.cygnus.com>
1258 * interp.c (prog_bfd_was_opened_p): New static local.
1259 (prog_bfd): New global variable.
1260 (sim_open): Undo patch to add -E support.
1261 (sim_close): Close prog_bfd if sim_load opened it.
1262 (sim_load): Record bfd of loaded file in prog_bfd.
1263 * simops.c (prog_bfd): Renamed from exec_bfd.
1265 Fri Apr 18 14:17:12 1997 Andrew Cagney <cagney@b1.cygnus.com>
1267 * interp.c (sim_stop): Stub function.
1269 Thu Apr 17 03:53:18 1997 Doug Evans <dje@canuck.cygnus.com>
1271 * Makefile.in (SIM_OBJS): Add sim-load.o.
1272 * interp.c (sim_kind, myname): New static locals.
1273 (sim_open): Set sim_kind, myname. Ignore -E arg.
1274 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
1275 load file into simulator. Set start address from bfd.
1276 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1278 Wed Apr 16 19:53:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1280 * simops.c (OP_10007E0): Only provide system calls SYS_execv,
1281 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
1283 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1285 * configure: Regenerated to track ../common/aclocal.m4 changes.
1288 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1290 * interp.c (sim_open): New arg `kind'.
1292 * configure: Regenerated to track ../common/aclocal.m4 changes.
1294 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1296 * configure: Regenerated to track ../common/aclocal.m4 changes.
1298 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1300 * configure: Regenerated to track ../common/aclocal.m4 changes.
1302 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1304 * configure: Re-generate.
1306 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1308 * configure: Regenerate to track ../common/aclocal.m4 changes.
1310 Thu Mar 13 13:00:54 1997 Doug Evans <dje@canuck.cygnus.com>
1312 * interp.c (sim_open): New SIM_DESC result. Argument is now
1314 (other sim_*): New SIM_DESC argument.
1316 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
1318 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1319 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1320 * configure.in: sinclude ../common/aclocal.m4.
1321 * configure: Regenerated.
1323 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1325 * configure configure.in Makefile.in: Update to new configure
1326 scheme which is more compatible with WinGDB builds.
1327 * configure.in: Improve comment on how to run autoconf.
1328 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1329 * Makefile.in: Use autoconf substitution to install common
1332 Mon Jan 20 16:05:34 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1334 * simops.c (OP_{E0,2E0,6E0}): The multiply operations sign extend,
1337 Tue Jan 14 17:06:03 1997 Stu Grossman (grossman@critters.cygnus.com)
1339 * simops.c: Put ifdefs around things to make MSVC happy. Get rid
1340 of unistd.h. Disable SYS_stat, SYS_chown, SYS_time, SYS_times,
1341 SYS_gettimeofday and SYS_utime from MSVC.
1343 Tue Dec 31 18:11:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1345 * simops.c (OP_10007E0): Know that kill encodes the signal number
1346 via: 0xdead0000 | signal and turn it back into a signal.
1348 Fri Dec 27 14:44:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1350 * v850_sim.h (SIG_V850_EXIT): Define as -1.
1352 * interp.c (sim_open): Cast calloc function.
1353 (sim_stop_reason): If signal is SIG_V850_EXIT, inform gdb the
1354 program exited with the appropriate exit code.
1355 (sim_set_interrupt): Declare buildargv.
1357 * simops.c (OP_10007E0): Make exit signal normal exit. Make time
1358 type correct and work on big endian systems.
1360 Wed Nov 20 02:18:44 1996 Doug Evans <dje@canuck.cygnus.com>
1362 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
1363 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
1364 * configure.in: Simplify using macros in ../common/aclocal.m4.
1365 Call AC_CHECK_HEADERS(unistd.h).
1366 * configure: Regenerated.
1367 * config.in: New file.
1368 * simops.c: #include "config.h". #include <unistd.h> if present.
1370 Sun Nov 3 23:02:54 1996 Stan Shebs <shebs@andros.cygnus.com>
1372 * v850_sim.h (State): New slots dummy_mem, pending_nmi.
1373 (EIPC, etc): New macros for system registers.
1374 * simops.c, interp.c: Use everywhere.
1376 * interp.c: Add support for interrupts issued by interrupt
1377 generators, either PC- or time-based. Controlled by simulator
1378 command "sim interrupt".
1380 * interp.c: Add support for variable-size allocation of memory,
1381 via simulator command "sim memory-map".
1382 (map): Issue SIGSEGV for references to invalid memory regions.
1384 Thu Oct 31 14:44:10 1996 Gavin Koch <gavin@cygnus.com>
1386 * simops.c: Include <sys/time.h> for struct timeval and
1389 Wed Oct 30 08:49:10 1996 Jeffrey A Law (law@cygnus.com)
1391 * simops.c (OP_10007E0): Handle SYS_times and SYS_gettimeofday.
1393 * simops.c (OP_10007E0): Handle SYS_time.
1395 Tue Oct 29 14:22:55 1996 Jeffrey A Law (law@cygnus.com)
1397 * simops.c: Include <sys/stat.h>.
1398 (OP_10007E0): Handle SYS_stat.
1400 Thu Oct 24 12:26:35 1996 Jeffrey A Law (law@cygnus.com)
1402 * simops.c (OP_10007E0): Don't declare errno.
1404 * simops.c (OP_500): Mask off low bit in displacement
1406 (OP_501): Similarly.
1408 * simops.c (OP_500): Fix displacement handling for sld.w.
1409 (OP_501): Similarly for sst.w.
1411 * simops.c (trace_input): Remove all references to SEXT7.
1412 (OP_300, OP_400, OP_500, OP_380, OP_480, OP_501): Displacement
1413 is zero extended for sst/sld instructions.
1414 * v850_sim.h (SEX7): Delete. It's no longer needed (and it
1415 was incorrect anyway).
1417 Thu Oct 24 10:33:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1419 * Makefile.in: Get rid of srcroot. Set all INSTALL macros via
1421 * gencode.c (write_opcodes): Pad operands field to account for
1423 * simops.c: Include errno.h. Exclude SYS_chown, since MSVC
1424 doesn't support it. (Why is this here in the first place?!?)
1425 * v850_sim.h: Get rid of 64 bit defs. Also, get rid of #elif's.
1426 Change number of operands in struct simops from 9 to 6. Define
1427 SIGTRAP and SIGQUIT for MSVC.
1429 Tue Oct 15 16:19:51 1996 Stu Grossman (grossman@critters.cygnus.com)
1431 * interp.c (MEM_SIZE): It's now bytes, not a power of 2.
1432 * (map): Add support for external mem in the 1->2 meg range.
1433 Also, abort() when memory access is way out of bounds. (Better to
1434 die than to give wrong result. (This will be fixed later.))
1435 * (sim_size): MEM_SIZE is now bytes, not shift factor.
1437 Tue Oct 1 15:53:24 1996 Gavin Koch <gavin@cygnus.com>
1439 * simops.c (trace_input): Swapped order of operands for output
1440 output of OP_IMM_REG. Changed the fetching of the operands for
1441 OP_LOAD32, and OP_STORE32 to work like op-function.
1443 Mon Sep 30 15:46:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1445 * interp.c: Move includes of remote-sim.h and callback.h to
1447 * (lookup_hash): Add PC to report of hash failure.
1448 * (map load_mem store_mem): New memory subsystem. Models V851
1450 * (sim_write sim_read): Use new memory subsystem.
1451 * (sim_resume): Don't load and save PC into EIPC anymore. Needed
1452 to make user-defined traps work right.
1453 * simops.c (OP_*): Use new memory subsystem.
1454 * (OP_14007E0 (reti)): Implement reti.
1455 * (OP_14996E0 (trap)): Implement user-defined traps. Move I/O to
1456 trap 31. Use new memory subsystem.
1457 * v850_sim.h: Prototypes for load_mem, store_mem and map. Use
1458 load_mem in RLW macro.
1460 Fri Sep 27 18:34:09 1996 Stu Grossman (grossman@critters.cygnus.com)
1462 * gencode.c (write_opcodes): Output hex values for opcode mask
1464 * interp.c (sim_resume): Save and restore PC from the appropriate
1466 * (sim_fetch_register sim_store_register): Fix byte-order problem
1467 with reading and writing registers.
1468 * simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
1470 Fri Sep 27 17:42:37 1996 Jeffrey A Law (law@cygnus.com)
1472 * simops.c (trace_input): Fix thinko.
1474 Wed Sep 18 09:54:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1476 * simops.c (exec_bfd): Rename from sim_bfd.
1477 (trace_input): Ditto.
1479 Thu Sep 12 12:03:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1481 * simops.c (trace_input): Use find_nearest_line to print line
1482 number, function name or file name of PC.
1484 Wed Sep 11 16:44:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1486 * simops.c: Add tracing support. Use SEXTxx macros instead of
1487 doing hardwired shifts.
1489 * configure.in (--enable-sim-cflags): Add switch to add additional
1490 flags to simulator buld. If --enable-sim-cflags=trace, turn on
1492 * configure: Regenerate.
1494 * Makefile.in: Don't require a VPATH capable make if configuring
1495 in the same directory. Don't use CFLAGS for configuration flags.
1496 Add flags from --enable-sim-cflags. Support canadian cross
1497 builds. Rebuild whole simulator if include files change.
1499 * interp.c (v850_debug): New global for debugging.
1500 (lookup_hash,sim_size,sim_set_profile): Use
1501 printf_filtered callback, instead of calling printf directly.
1502 (sim_{open,trace}): Enable tracing if -t and compiled for tracing.
1504 * v850_sim.h: Use limits.h to set the various sized types.
1505 (SEXT{5,7,16,22}): New macros.
1507 Mon Sep 9 20:50:46 1996 Jeffrey A Law (law@cygnus.com)
1509 * interp.c (hash): Make this an inline function
1510 when compiling with GCC. Simplify.
1511 * simpos.c: Explicitly include "sys/syscall.h". Remove
1512 some #if 0'd code. Enable more emulated syscalls.
1514 Wed Sep 4 01:48:55 1996 Jeffrey A Law (law@cygnus.com)
1516 * interp.c: Fix sign bit handling for add and sub instructions.
1518 Tue Sep 3 10:20:30 1996 Jeffrey A Law (law@cygnus.com)
1520 * gencode.c: Fix various indention & style problems.
1521 Remove test code. Remove #if 0 code.
1522 * interp.c: Provide prototypes for all static functions.
1523 Fix minor indention problems.
1524 (sim_open, sim_resume): Remove unused variables.
1525 (sim_read): Return type is "int".
1526 * simops.c: Remove unused variables.
1527 (divh): Make result of divide-by-zero zero.
1528 (setf): Initialize result to keep compiler quiet.
1529 (sar instructions): These just clear the overflow bit.
1530 * v850_sim.h: Provide prototypes for put_byte, put_half
1533 * interp.c: OP should be an array of 32bit operands!
1534 (v850_callback): Declare.
1535 (do_format_5): Fix extraction of OP[0].
1536 (sim_size): Remove debugging printf.
1537 (sim_set_callbacks): Do something useful.
1538 (sim_stop_reason): Gross hacks to get c-torture running.
1539 * simops.c: Simplify code for computing targets of bCC
1540 insns. Invert 's' bit if 'ov' bit is set for some
1541 instructions. Fix 'cy' bit handling for numerous
1542 instructions. Make the simulator stop when a halt
1543 instruction is encountered. Very crude support for
1544 emulated syscalls (trap 0).
1545 * v850_sim.h: Include "callback.h" and declare
1546 v850_callback. Items in the operand array are 32bits.
1548 Sun Sep 1 22:35:35 1996 Jeffrey A Law (law@cygnus.com)
1550 * interp.c (sim_resume): Fix code to check for a format 3
1552 * simops.c: bCC insns only argument is a constant, not a
1553 register value (duh...)
1555 Fri Aug 30 10:33:49 1996 Jeffrey A Law (law@cygnus.com)
1557 * simops.c: Fix "not1" and "set1".
1559 * simops.c: Don't forget to initialize temp for
1562 * interp.c: Remove various debugging printfs.
1564 * simops.c: Fix satadd, satsub boundary case handling.
1566 * interp.c (hash): Fix.
1567 * interp.c (do_format_8): Get operands correctly and
1568 call the target function.
1569 * simops.c: Rough cut at "clr1", "not1", "set1", and "tst1".
1571 Thu Aug 29 13:53:29 1996 Jeffrey A Law (law@cygnus.com)
1573 * interp.c (do_format_4): Get operands correctly and
1574 call the target function.
1575 * simops.c: Rough cut at "sld.b", "sld.h", "sld.w", "sst.b",
1576 "sst.h", and "sst.w".
1578 * v850_sim.h: The V850 doesn't have split I&D spaces. Change
1579 accordingly. Remove many unused definitions.
1580 * interp.c: The V850 doesn't have split I&D spaces. Change
1582 (get_longlong, get_longword, get_word): Deleted.
1583 (write_longlong, write_longword, write_word): Deleted.
1584 (get_operands): Deleted.
1585 (get_byte, get_half, get_word): New functions.
1586 (put_byte, put_half, put_word): New functions.
1587 * simops.c: Remove unused functions. Rough cut at
1588 "ld.b", "ld.h", "ld.w", "st.b", "st.h", "st.w" insns.
1590 * v850_sim.h (struct _state): Remove "psw" field. Add
1592 (PSW): Remove bogus definition.
1593 * simops.c: Change condition code handling to use the psw
1594 register within the sregs array. Handle "ldsr" and "stsr".
1596 * simops.c: Handle "satadd", "satsub", "satsubi", "satsubr".
1598 * interp.c (do_format_5): Get operands correctly and
1599 call the target function.
1600 (sim_resume): Don't do a PC update for format 5 instructions.
1601 * simops.c: Handle "jarl" and "jmp" instructions.
1603 * simops.c: Fix minor typos. Handle "cmp", "setf", "tst"
1604 "di", and "ei" instructions correctly.
1606 * interp.c (do_format_3): Get operands correctly and call
1607 the target function.
1608 * simops.c: Handle bCC instructions.
1610 * simops.c: Add condition code handling to shift insns.
1611 Fix minor typos in condition code handling for other insns.
1613 * Makefile.in: Fix typo.
1614 * simops.c: Add condition code handling to "sub" "subr" and
1615 "divh" instructions.
1617 * interp.c (hash): Update to be more accurate.
1618 (lookup_hash): Call hash rather than computing the hash
1620 (do_format_1_2): Handle format 1 and format 2 instructions.
1621 Get operands correctly and call the target function.
1622 (do_format_6): Get operands correctly and call the target
1624 (do_formats_9_10): Rough cut so shift ops will work.
1625 (sim_resume): Tweak to deal with format 1 and format 2
1626 handling in a single funtion. Don't update the PC
1627 for format 3 insns. Fix typos.
1628 * simops.c: Slightly reorganize. Add condition code handling
1629 to "add", "addi", "and", "andi", "or", "ori", "xor", "xori"
1630 and "not" instructions.
1631 * v850_sim.h (reg_t): Registers are 32bits.
1632 (_state): The V850 has 32 general registers. Add a 32bit
1633 psw and pc register too. Add accessor macros
1635 * Makefile.in, interp.c, v850_sim.h: Bring over endianness
1636 changes from the d10v simulator.
1638 * simops.c: Add shift support.
1640 * simops.c: Add multiply & divide support. Abort for system
1643 * simops.c: Add logicals, mov, movhi, movea, add, addi, sub
1644 and subr. No condition codes yet.
1646 Wed Aug 28 13:53:22 1996 Jeffrey A Law (law@cygnus.com)
1648 * ChangeLog, Makefile.in, configure, configure.in, v850_sim.h,
1649 gencode.c, interp.c, simops.c: Created.