1 2021-06-08 Mike Frysinger <vapier@gentoo.org>
3 * Makefile.in: Replace $(IGEN) with $(IGEN_RUN) and ../igen/igen
6 2021-06-08 Mike Frysinger <vapier@gentoo.org>
8 * configure.ac (AC_CHECK_FUNCS_ONCE): Remove chown.
9 * simops.c (OP_10007E0): Remove HAVE_CHOWN check.
10 * config.in, configure: Regenerate.
12 2021-05-29 Mike Frysinger <vapier@gentoo.org>
14 * simops.c (OP_10007E0): Add (void*) casts to argv & envp.
16 2021-05-17 Mike Frysinger <vapier@gentoo.org>
18 * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Delete.
20 2021-05-17 Mike Frysinger <vapier@gentoo.org>
22 * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Define.
23 (struct sim_state): Delete.
25 2021-05-16 Mike Frysinger <vapier@gentoo.org>
27 * interp.c, simops.c: Include defs.h.
28 * sim-main.h: Delete config.h include.
30 2021-05-16 Mike Frysinger <vapier@gentoo.org>
32 * config.in, configure: Regenerate.
34 2021-05-04 Mike Frysinger <vapier@gentoo.org>
36 * configure: Regenerate.
38 2021-05-03 Simon Marchi <simon.marchi@polymtl.ca>
40 * interp.c (sim_open): Adjust format string specifier.
42 2021-05-01 Mike Frysinger <vapier@gentoo.org>
44 * config.in, configure: Regenerate.
46 2021-04-26 Mike Frysinger <vapier@gentoo.org>
48 * aclocal.m4, config.in, configure: Regenerate.
50 2021-04-22 Tom Tromey <tom@tromey.com>
52 * configure, config.in: Rebuild.
54 2021-04-22 Tom Tromey <tom@tromey.com>
56 * Makefile.in (INCLUDE): Remove.
58 2021-04-22 Tom Tromey <tom@tromey.com>
60 * Makefile.in (interp.o, simops.o, semantics.o): Remove.
62 2021-04-22 Tom Tromey <tom@tromey.com>
66 2021-04-21 Mike Frysinger <vapier@gentoo.org>
68 * aclocal.m4: Regenerate.
70 2021-04-21 Simon Marchi <simon.marchi@polymtl.ca>
72 * configure: Regenerate.
74 2021-04-18 Mike Frysinger <vapier@gentoo.org>
76 * configure.ac: Change AC_CHECK_HEADERS to AC_CHECK_HEADERS_ONCE.
77 * configure: Regenerate.
79 2021-04-18 Mike Frysinger <vapier@gentoo.org>
81 * configure.ac: Change AC_CHECK_FUNCS to AC_CHECK_FUNCS_ONCE and
83 * configure: Regenerate.
85 2021-04-12 Mike Frysinger <vapier@gentoo.org>
87 * interp.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
89 2021-04-08 Simon Marchi <simon.marchi@polymtl.ca>
91 * Makefile.in: Set ASAN_OPTIONS when running igen.
93 2021-04-02 Mike Frysinger <vapier@gentoo.org>
95 * Makefile.in (../igen/igen): Delete rule.
96 (tmp-igen): Delete ../igen make.
98 2021-04-02 Mike Frysinger <vapier@gentoo.org>
100 * aclocal.m4, configure: Regenerate.
102 2021-02-28 Mike Frysinger <vapier@gentoo.org>
104 * configure: Regenerate.
106 2021-02-21 Mike Frysinger <vapier@gentoo.org>
108 * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
109 * aclocal.m4, configure: Regenerate.
111 2021-02-13 Mike Frysinger <vapier@gentoo.org>
113 * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
114 * aclocal.m4, configure: Regenerate.
116 2021-02-06 Mike Frysinger <vapier@gentoo.org>
118 * interp.c (sim_open): Delete call to STATE_WATCHPOINTS.
120 2021-02-06 Mike Frysinger <vapier@gentoo.org>
122 * configure: Regenerate.
124 2021-01-31 Mike Frysinger <vapier@gentoo.org>
126 * simops.c: Include stdlib.h.
127 * configure.ac (SIM_AC_OPTION_WARNINGS): Delete call.
128 * configure: Regenerate.
130 2021-01-31 Mike Frysinger <vapier@gentoo.org>
132 * simops.c (OP_10007E0): Change reterr to RETERR.
134 2021-01-30 Mike Frysinger <vapier@gentoo.org>
136 * interp.c (sim_open): Delete STATE_WATCHPOINTS (sd)->sizeof_pc.
138 2021-01-11 Mike Frysinger <vapier@gentoo.org>
140 * config.in, configure: Regenerate.
141 * interp.c, simops.c: Delete HAVE_STRING_H, HAVE_STRINGS_H,
142 HAVE_STDLIB_H, HAVE_TIME_H, and strings.h include.
144 2021-01-09 Mike Frysinger <vapier@gentoo.org>
146 * configure: Regenerate.
148 2021-01-09 Mike Frysinger <vapier@gentoo.org>
150 * configure.ac (SIM_AC_OPTION_WARNINGS): Pass "no".
151 * configure: Regenerate.
153 2021-01-08 Mike Frysinger <vapier@gentoo.org>
155 * configure: Regenerate.
157 2021-01-04 Mike Frysinger <vapier@gentoo.org>
159 * configure: Regenerate.
161 2017-09-06 John Baldwin <jhb@FreeBSD.org>
163 * configure: Regenerate.
165 2016-01-10 Mike Frysinger <vapier@gentoo.org>
167 * config.in, configure: Regenerate.
169 2016-01-10 Mike Frysinger <vapier@gentoo.org>
171 * configure: Regenerate.
173 2016-01-10 Mike Frysinger <vapier@gentoo.org>
175 * configure: Regenerate.
177 2016-01-10 Mike Frysinger <vapier@gentoo.org>
179 * configure: Regenerate.
181 2016-01-10 Mike Frysinger <vapier@gentoo.org>
183 * configure: Regenerate.
185 2016-01-10 Mike Frysinger <vapier@gentoo.org>
187 * configure: Regenerate.
189 2016-01-10 Mike Frysinger <vapier@gentoo.org>
191 * configure: Regenerate.
193 2016-01-10 Mike Frysinger <vapier@gentoo.org>
195 * configure: Regenerate.
197 2016-01-09 Mike Frysinger <vapier@gentoo.org>
199 * config.in, configure: Regenerate.
201 2016-01-06 Mike Frysinger <vapier@gentoo.org>
203 * interp.c (sim_open): Mark argv const.
204 (sim_create_inferior): Mark argv and env const.
206 2016-01-04 Mike Frysinger <vapier@gentoo.org>
208 * configure: Regenerate.
210 2016-01-03 Mike Frysinger <vapier@gentoo.org>
212 * interp.c (sim_open): Update sim_parse_args comment.
214 2016-01-03 Mike Frysinger <vapier@gentoo.org>
216 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
217 * configure: Regenerate.
219 2016-01-02 Mike Frysinger <vapier@gentoo.org>
221 * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
223 * configure: Regenerate.
225 2015-12-30 Mike Frysinger <vapier@gentoo.org>
227 * wrapper.c (v850_reg_store, v850_reg_fetch): Define.
228 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
229 (sim_store_register): Rename to ...
230 (v850_reg_store): ... this.
231 (sim_fetch_register): Rename to ...
232 (v850_reg_fetch): ... this.
234 2015-12-27 Mike Frysinger <vapier@gentoo.org>
236 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
238 2015-12-26 Mike Frysinger <vapier@gentoo.org>
240 * config.in, configure: Regenerate.
242 2015-12-24 Mike Frysinger <vapier@gentoo.org>
244 * sim-main.h (WITH_WATCHPOINTS): Delete.
246 2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com>
248 * simops.c (v850_bins): Fix left shift of negative value.
250 2015-11-17 Mike Frysinger <vapier@gentoo.org>
252 * sim-main.h (WITH_CORE): Delete.
254 2015-11-17 Mike Frysinger <vapier@gentoo.org>
256 * sim-main.h (WITH_MODULO_MEMORY): Delete.
258 2015-11-15 Mike Frysinger <vapier@gentoo.org>
260 * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
262 2015-11-14 Mike Frysinger <vapier@gentoo.org>
264 * interp.c (sim_close): Delete.
266 2015-06-23 Mike Frysinger <vapier@gentoo.org>
268 * configure: Regenerate.
270 2015-06-12 Mike Frysinger <vapier@gentoo.org>
272 * configure: Regenerate.
274 2015-06-12 Mike Frysinger <vapier@gentoo.org>
276 * configure: Regenerate.
278 2015-06-11 Mike Frysinger <vapier@gentoo.org>
280 * interp.c (INLINE): Delete define.
282 2015-04-18 Mike Frysinger <vapier@gentoo.org>
284 * sim-main.h (SIM_CPU): Delete.
286 2015-04-18 Mike Frysinger <vapier@gentoo.org>
288 * sim-main.h (sim_cia): Delete.
290 2015-04-17 Mike Frysinger <vapier@gentoo.org>
292 * sim-main.h (CIA_GET, CIA_SET): Delete.
294 2015-04-15 Mike Frysinger <vapier@gentoo.org>
296 * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
297 * sim-main.h (STATE_CPU): Delete.
299 2015-04-13 Mike Frysinger <vapier@gentoo.org>
301 * configure: Regenerate.
303 2015-04-13 Mike Frysinger <vapier@gentoo.org>
305 * Makefile.in (SIM_OBJS): Add sim-cpu.o.
306 * interp.c (v850_pc_get, v850_pc_set): New functions.
307 (sim_open): Declare new local var i. Call sim_cpu_alloc_all.
308 Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
309 (sim_pc_get): Delete.
310 * sim-main.h (SIM_CPU): Define.
311 (struct sim_state): Change cpu to an array of pointers.
314 2015-04-06 Mike Frysinger <vapier@gentoo.org>
316 * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
318 2015-03-31 Mike Frysinger <vapier@gentoo.org>
320 * config.in, configure: Regenerate.
322 2015-03-24 Mike Frysinger <vapier@gentoo.org>
324 * interp.c (sim_pc_get): New function.
326 2015-03-16 Mike Frysinger <vapier@gentoo.org>
328 * config.in, configure: Regenerate.
330 2015-03-14 Mike Frysinger <vapier@gentoo.org>
332 * Makefile.in (SIM_RUN_OBJS): Delete.
334 2015-03-14 Mike Frysinger <vapier@gentoo.org>
336 * configure.ac (AC_CHECK_HEADERS): Delete unistd.h & stdlib.h &
337 string.h & strings.h & time.h.
338 * aclocal.m4, configure: Regenerate.
340 2015-02-27 Nick Clifton <nickc@redhat.com>
342 * sim-main.h (reg64_t): New type.
343 (v850_regs): Add selID_sregs field.
344 (VR, SAT16, SAT32, ABS16, ABS32 ): New macros.
345 * v850-dc: Add fields for v850e3v5 instructions.
346 * v850.igen (cvtf.dl): Use correctly signed local value.
347 (cvtf.dw, cvtf.sw, trncf.dul, trncf.dl, trncf.sul, trncf.sw):
349 * interp.c: Fix old style function declarations.
350 * simops.c: Likewise.
352 2015-02-24 Nick Clifton <nickc@redhat.com>
354 * v850.igen: Add more e3v5 support.
355 (FMAF.S): New pattern.
356 (FMSF.S): New pattern.
357 (FNMAF.S): New pattern.
358 (FNMSF.S): New pattern.
359 (cnvq15q30): New pattern.
360 (cnvq30q15): New pattern.
361 (cnvq31q62): New pattern.
362 (cnvq62q31): New pattern.
363 (dup.h): New pattern.
364 (dup.w): New pattern.
365 (expq31): New pattern.
366 (modadd): New pattern.
367 (mov.dw): New pattern.
368 (mov.h): New pattern.
369 (mov.w): New pattern.
370 (pki16i32): New pattern.
371 (pki16ui8): New pattern.
372 (pki32i16): New pattern.
373 (pki64i32): New pattern.
374 (pkq15q31): New pattern.
375 (pkq30q31): New pattern.
376 (pkq31q15): New pattern.
377 (pkui8i16): New pattern.
378 (vabs.h): New pattern.
379 (vabs.w): New pattern.
380 (vadd.dw): New placeholder pattern.
381 (vadd.h): New placeholder pattern.
382 (vadd.w): New placeholder pattern.
383 (vadds.h): New placeholder pattern.
384 (vadds.w): New placeholder pattern.
385 (vaddsat.h): New placeholder pattern.
386 (vaddsat.w): New placeholder pattern.
388 (vbiq.h): New placeholder pattern.
389 (vbswap.dw): New placeholder pattern.
390 (vbswap.h): New placeholder pattern.
391 (vbswap.w): New placeholder pattern.
392 (vcalc.h): New placeholder pattern.
393 (vcalc.w): New placeholder pattern.
394 (vcmov): New placeholder pattern.
396 2014-08-19 Alan Modra <amodra@gmail.com>
398 * configure: Regenerate.
400 2014-08-15 Roland McGrath <mcgrathr@google.com>
402 * configure: Regenerate.
403 * config.in: Regenerate.
405 2014-03-04 Mike Frysinger <vapier@gentoo.org>
407 * configure: Regenerate.
409 2013-09-23 Alan Modra <amodra@gmail.com>
411 * configure: Regenerate.
413 2013-06-03 Mike Frysinger <vapier@gentoo.org>
415 * aclocal.m4, configure: Regenerate.
417 2013-05-13 Nick Clifton <nickc@redhat.com>
419 * v850.igen (LDSR): Accept but ignore a selID parameter.
421 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
423 * configure: Rebuild.
425 2013-01-28 Nick Clifton <nickc@redhat.com>
427 * simops.c (v850_rotl): New function.
428 (v850_bins): New function.
429 * simops.h: Add prototypes fir v850_rotl and v850_bins.
430 * v850-dc: Add entries for V850e3v5.
431 * v850.igen: Add support for v850e3v5.
432 (ld.dw, st.dw, rotl, bins): New patterns.
434 2013-01-10 Nick Clifton <nickc@redhat.com>
436 * interp.c (sim_open): Add support for bfd_arch_v850_rh850
437 architecture type. Add support for bfd_mach_v850e2 and
438 bfd_mach_v850e2v3 machine numbers.
439 * v850.igen (dbtrap): Add support for SIM_OPEN_DEBUG.
440 (cmpf.d): Correct order of operands.
442 (trncf.dul): New pattern.
443 (trncf.duw): New pattern.
444 (trncf.sul): New pattern.
445 (trncf.suw): New pattern.
446 * v850-dc: Correct bitfield selection for TRNCF.SW and CVTF.SW.
448 2012-09-13 Nick Clifton <nickc@redhat.com>
450 * v850.igen (W,WWWW): Correct computation of register number.
451 (JR32): Remove unnecessary comma.
452 (cmovf.s): Register 0 is an invalid source register.
453 (maddf.s): Remove bogus intermediary rounding.
454 (nmaddf.s): Likewise.
455 (trncf.sl): Remove bogus initial rounding.
456 (trncf.dw): Likewise.
457 (trncf.sl): Likewise.
458 (trncf.sw): Likewise.
460 2012-06-15 Joel Brobecker <brobecker@adacore.com>
462 * config.in, configure: Regenerate.
464 2012-03-28 Rathish C <rathish.c@kpitcummins.com>
466 * sim-main.h (struct _v850_regs): Add new fields mpu0_sregs,
467 mpu1_sregs, and fpu_sregs.
468 (MPU0_SR, MPU1_SR, FPU_SR): New macros for accessing new fields
469 in _v850_regs struct.
471 (SP): Redefine using SP_REGNO.
472 (PSW_REGNO, EIIC, FEIC, DBIC, DIR, EIWR, FEWR, DBWR, BSEL, PSW_NPV)
473 (PSW_DMP, PSW_IMP, ECR_EICC, ECR_FECC, FPSR, FPSR_REGNO, FPEPC)
474 (FPST, FPST_REGNO, FPCC, FPCFG, FPCFG_REGNO, FPSR_DEM, FPSR_SEM)
475 (FPSR_RM, FPSR_RN, FPSR_FS, FPSR_PR, FPSR_XC, FPSR_XCE, FPSR_XCV)
476 (FPSR_XCZ, FPSR_XCO, FPSR_XCU, FPSR_XCI, FPSR_XE, FPSR_XEV)
477 (FPSR_XEZ, FPSR_XEO, FPSR_XEU, FPSR_XEI, FPSR_XP, FPSR_XPV)
478 (FPSR_XPZ, FPSR_XPO, FPSR_XPU, FPSR_XPI, FPST_PR, FPST_XCE)
479 (FPST_XCV, FPST_XCZ, FPST_XCO, FPST_XCU, FPST_XCI, FPST_XPV)
480 (FPST_XPZ, FPST_XPO, FPST_XPU, FPST_XPI, FPCFG_RM, FPCFG_XEV)
481 (FPCFG_XEZ, FPCFG_XEO, FPCFG_XEU, FPCFG_XEI, GET_FPCC, CLEAR_FPCC)
482 (SET_FPCC, TEST_FPCC, FPSR_GET_ROUND, MPM, MPC, MPC_REGNO, TID)
483 (PPA, PPM, PPC, DCC, DCV0, DCV1, SPAL, SPAU, IPA0L, IPA0U, IPA1L)
484 (IPA1U, IPA2L, IPA2U, IPA3L, IPA3U, DPA0L, DPA0U, DPA1L, DPA1U)
485 (DPA2L, DPA2U, DPA3L, DPA3U, PPC_PPE, SPAL_SPE, SPAL_SPS, VIP)
486 (VMECR, VMTID, VMADR, VPECR, VPTID, VPADR, VDECR, VDTID, MPM_AUE)
487 (MPM_MPE, VMECR_VMX, VMECR_VMR, VMECR_VMW, VMECR_VMS, VMECR_VMRMW)
488 (VMECR_VMMS, IPA2ADDR, IPA_IPE, IPA_IPX, IPA_IPR, IPE0, IPE1, IPE2)
489 (IPE3, IPX0, IPX1, IPX2, IPX3, IPR0, IPR1, IPR2, IPR3, DPA2ADDR)
490 (DPA_DPE, DPA_DPR, DPA_DPW, DPE0, DPE1, DPE2, DPE3, DPR0, DPR1)
491 (DPR2, DPR3, DPW0, DPW1, DPW2, DPW3, DCC_DCE0, DCC_DCE1, PPA2ADDR)
492 (PPC_PPC, PPC_PPE, PPC_PPM): New macros.
493 (FPU_COMPARE): New enum.
494 (TRACE_FP_INPUT_FPU1, TRACE_FP_INPUT_FPU2, TRACE_FP_INPUT_FPU3)
495 (TRACE_FP_INPUT_BOOL1_FPU2, TRACE_FP_INPUT_WORD2)
496 (TRACE_FP_RESULT_WORD1, TRACE_FP_RESULT_WORD2): New macros.
497 * simops.c (Add32): Update prototype.
498 (update_fpsr): New function.
499 (SignalException): New function.
500 (SignalExceptionFPE): New function.
501 (check_invalid_snan): New function.
502 (v850_float_compare): New function.
503 (v850_div): New function.
504 (v850_divu): New function.
505 (v850_sar): New function.
506 (v850_shl): New function.
507 (v850_shr): New function.
508 (v850_satadd): New function.
509 (v850_satsub): New function.
510 (load_data_mem): New function.
511 (store_data_mem): New function.
512 (mpu_load_mem_test): New function.
513 (mpu_store_mem_test): New function.
514 * simops.h: Add function prototype for above mentioned functions.
515 (check_cvt_fi, check_cvt_if, check_cvt_ff): Define.
516 * v850-dc: Add entry for v850e2 and v850e2v3.
517 * v850.igen: Add support for v850e2 and v850e2v3.
519 2012-03-24 Mike Frysinger <vapier@gentoo.org>
521 * aclocal.m4, config.in, configure: Regenerate.
523 2011-12-03 Mike Frysinger <vapier@gentoo.org>
525 * aclocal.m4: New file.
526 * configure: Regenerate.
528 2011-10-17 Mike Frysinger <vapier@gentoo.org>
530 * configure.ac: Change include to common/acinclude.m4.
532 2011-10-17 Mike Frysinger <vapier@gentoo.org>
534 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
535 call. Replace common.m4 include with SIM_AC_COMMON.
536 * configure: Regenerate.
538 2011-07-05 Mike Frysinger <vapier@gentoo.org>
540 * interp.c (sim_do_command): Delete.
542 2011-03-21 Kevin Buettner <kevinb@redhat.com>
544 * simops (OP_10007E0): Update errno handling as most traps
545 do not invoke the host's functionality directly. Invoke
546 sim_io_stat() instead of stat() for implementing TARGET_SYS_stat.
547 Implement TARGET_SYS_fstat, TARGET_SYS_rename, and TARGET_SYS_unlink.
549 2011-02-14 Mike Frysinger <vapier@gentoo.org>
551 * simops.c (OP_10007E0): Change zfree to free.
553 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
555 * interp.c (sim_store_register): Update return value to
558 2010-03-30 Mike Frysinger <vapier@gentoo.org>
560 * interp.c (interrupt_names): Add const to pointer type.
561 (do_interrupt): Add const to interrupt_name.
563 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
565 * configure: Regenerate.
567 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
569 * config.in: Regenerate.
570 * configure: Likewise.
572 * configure: Regenerate.
574 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
576 * configure: Regenerate to track ../common/common.m4 changes.
579 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
580 Daniel Jacobowitz <dan@codesourcery.com>
581 Joseph Myers <joseph@codesourcery.com>
583 * configure: Regenerate.
585 2008-02-05 DJ Delorie <dj@redhat.com>
587 * simops.c (OP_1C007E0): Compensate for 64 bit hosts.
588 (OP_18007E0): Likewise.
589 (OP_2C007E0): Likewise.
590 (OP_28007E0): Likewise.
591 * v850.igen (divh): Likewise.
593 * simops.c (OP_C0): Correct saturation logic.
599 * simops.c (OP_2A0): If the shift count is zero, clear the
601 (OP_A007E0): Likewise.
603 (OP_C007E0): Likewise.
605 (OP_8007E0): Likewise.
607 * simops.c (OP_2C207E0): Correct PSW flags for special divu
609 (OP_2C007E0): Likewise, for div.
610 (OP_28207E0): Likewise, for divhu.
611 (OP_28007E0): Likewise, for divh. Also, sign-extend the correct
613 * v850.igen (divh): Likewise, for 2-op divh.
615 * v850.igen (bsh): Fix carry logic.
617 2007-02-20 Daniel Jacobowitz <dan@codesourcery.com>
619 * Makefile.in (interp.o): Uncomment and update.
621 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
623 * acconfig.h: Remove.
624 * config.in: Regenerate.
626 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
628 * configure: Regenerated.
630 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
632 * configure: Regenerated.
634 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
636 * configure: Regenerated.
638 2005-03-23 Mark Kettenis <kettenis@gnu.org>
640 * configure: Regenerate.
642 2005-01-14 Andrew Cagney <cagney@gnu.org>
644 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
645 explicit call to AC_CONFIG_HEADER.
646 * configure: Regenerate.
648 2005-01-12 Andrew Cagney <cagney@gnu.org>
650 * configure.ac: Update to use ../common/common.m4.
651 * configure: Re-generate.
653 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
655 * configure: Regenerated to track ../common/aclocal.m4 changes.
657 2005-01-07 Andrew Cagney <cagney@gnu.org>
659 * configure.ac: Rename configure.in, require autoconf 2.59.
660 * configure: Re-generate.
662 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
664 * configure: Regenerate for ../common/aclocal.m4 update.
666 2004-01-18 Mark Kettenis <kettenis@gnu.org>
668 * simops.c: Include <sys/types.h>.
670 2003-09-05 Andrew Cagney <cagney@redhat.com>
671 Nick Clifton <nickc@redhat.com>
673 * interp.c (sim_open): Accept bfd_mach_v850e1.
674 * v850-dc: Add entry for v850e1.
675 * v850.igen: Add support for v850e1.
676 Add code for DBTRAP and DBRET instructions.
677 (dbtrap): Create a separate v850e1 specific instruction.
678 Only generate a trap if the target is not the v850e1.
679 Otherwise treat it as a special kind of branch.
680 (break): Mark as v850/v850e specific.
682 2003-05-16 Ian Lance Taylor <ian@airs.com>
684 * Makefile.in (SHELL): Make sure this is defined.
685 (tmp-igen): Use $(SHELL) whenever we invoke move-if-change.
687 2003-04-06 Nick Clifton <nickc@redhat.com>
689 * simops.c (OP_40): Delete. Move code to...
690 * v850-igen.c (): ...Here. Sign extend the first operand.
691 * simops.h (OP_40): Remove prototype.
693 2003-02-27 Andrew Cagney <cagney@redhat.com>
695 * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
697 2002-11-30 Andrew Cagney <cagney@redhat.com>
699 * simops.c: Use int, 1, 0 instead of boolean, true and false.
702 2002-09-27 Jim Wilson <wilson@redhat.com>
704 * simops.c (OP_E6077E0): And op1 with 7 after reading register, not
706 (BIT_CHANGE_OP): Likewise.
708 2002-09-26 Jim Wilson <wilson@redhat.com>
710 * simops (OP_10007E0): Don't subtract 4 from PC.
712 2002-09-19 Nick Clifton <nickc@redhat.com>
714 * interp.c (sim_open): Remove reference to v850ea.
715 (sim_create_inferior): Likewise.
717 * v850.igen: Remove all references to v850ea, including v850ea
718 specific instructions.
720 2002-08-29 Nick Clifton <nickc@redhat.com>
722 From 2001-08-23 Catherine Moore <clm@redhat.com>
724 * Makefile.in: Add gen-zero-r0 option.
725 * sim-main.h (GPR_SET, GPR_CLEAR): Define.
726 * simops.c (OP_24007E0): Sign extend the imm9
727 operand of a mul instruction.
729 2002-06-17 Andrew Cagney <cagney@redhat.com>
731 * simops.c (trace_result): Fix printf formatting.
733 2002-06-16 Andrew Cagney <ac131313@redhat.com>
735 * configure: Regenerated to track ../common/aclocal.m4 changes.
737 2001-12-02 Andrew Cagney <ac131313@redhat.com>
739 * Makefile.in (simops.h, table.c): Delete targets.
740 (tmp-gencode, gencode.o, gencode): Delete targets.
741 (simops.h): New file.
742 ($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
743 * gencode.c: Delete file.
745 2001-04-15 J.T. Conklin <jtc@redback.com>
747 * Makefile.in (simops.o): Add simops.h to dependency list.
749 2001-03-14 Andrew Cagney <ac131313@redhat.com>
751 * Makefile.in (gencode): Link with libintl.
753 2001-01-31 Jonathan Larmour <jlarmour@redhat.com>
755 * Makefile.in (gencode): Link with libopcodes in build tree rather
756 than building source files from there.
758 2000-05-30 Nick Clifton <nickc@cygnus.com>
760 * v850.igen: Remove illegal instruction pattern, since it is the
761 same as the breakpoint pattern.
763 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
765 * configure: Regenerated to track ../common/aclocal.m4 changes.
767 2000-04-14 Gary Thomas <gthomas@redhat.com>
769 * v850.igen: Define 'br *' as illegal since this is the only
770 way to provide a breakpoint on some v850 family processors.
772 2000-03-24 Frank Ch. Eigler <fche@redhat.com>
774 * v850.igen (ilgop): New insn pattern for four-byte breakpoints.
776 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
778 * configure: Regenerated to track ../common/aclocal.m4 changes.
780 1999-05-08 Felix Lee <flee@cygnus.com>
782 * configure: Regenerated to track ../common/aclocal.m4 changes.
784 Tue Dec 1 17:25:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
786 * Makefile.in (NL_TARGET): Define as -DNL_TARGET_v850.
788 Wed Nov 25 17:52:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
790 * Makefile.in (simops.o): Depends on targ-vals.h
791 * simops.c: Include targ-vals.h instead of
792 libgloss/.../syscall.h. Replace SYS_* with TARGET_SYS_*.
793 (divn, divun, OP_1C007E0, OP_18207E0, OP_1C207E0,OP_18007E0):
794 Replace signed long int with signed32.
796 Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com>
798 * interp.c: #include "itable.h".
799 (get_insn_name): New function.
800 (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS.
801 * sim-main.h (MAX_INSNS,INSN_NAME): Delete.
803 Wed May 6 19:43:27 1998 Doug Evans <devans@canuck.cygnus.com>
805 * sim-main.h (INSN_NAME): New arg `cpu'.
807 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
809 * configure: Regenerated to track ../common/aclocal.m4 changes.
811 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
813 * configure: Regenerated to track ../common/aclocal.m4 changes.
816 Sun Apr 26 15:19:14 1998 Tom Tromey <tromey@cygnus.com>
818 * acconfig.h: New file.
819 * configure.in: Reverted change of Apr 24; use sinclude again.
821 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
823 * configure: Regenerated to track ../common/aclocal.m4 changes.
826 Fri Apr 24 11:18:08 1998 Tom Tromey <tromey@cygnus.com>
828 * configure.in: Don't call sinclude.
830 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
832 * configure: Regenerated to track ../common/aclocal.m4 changes.
833 * sim-main.h (SIM_MAIN_H): Wrap header.
835 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
837 * configure: Regenerated to track ../common/aclocal.m4 changes.
839 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
841 * configure: Regenerated to track ../common/aclocal.m4 changes.
843 Tue Mar 10 15:54:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
845 * interp.c (sim_stop): Delete, second attempt.
847 Thu Feb 26 19:09:47 1998 Andrew Cagney <cagney@b1.cygnus.com>
849 * interp.c (sim_info): Delete.
851 Wed Feb 18 10:47:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
853 * sim-main.h (TRACE_ALU_INPUT*): Delete. Moved to sim-trace.[hc].
855 * simops.c (trace_result): Call trace_generic instead of
857 (trace_module): Change variable type to integer.
858 (trace_input): Initialize trace_module with TRACE_ALU_IDX.
860 * sim-main.h (trace_module): Change variable decl to integer type.
861 (TRACE_BRANCH*, TRACE_LD, TRACE_ST): Update.
863 Tue Feb 17 12:51:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
865 * interp.c (sim_store_register, sim_fetch_register): Pass in
866 length parameter. Return -1.
868 Tue Feb 3 16:24:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
870 * sim-main.h (IMEM16, IMEM16_IMMED): Rename IMEM and
871 IMEM_IMMED. To match recent igen change.
873 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
875 * configure: Regenerated to track ../common/aclocal.m4 changes.
877 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
879 * configure: Regenerated to track ../common/aclocal.m4 changes.
881 Fri Jan 30 09:51:27 1998 Andrew Cagney <cagney@b1.cygnus.com>
883 * sim-main.h (CPU_CIA): Delete, replaced by.
884 (CIA_SET, CIA_SET): Define.
886 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
888 * configure: Regenerated to track ../common/aclocal.m4 changes.
890 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
892 * configure: Regenerated to track ../common/aclocal.m4 changes.
895 Fri Dec 5 09:26:08 1997 Nick Clifton <nickc@cygnus.com>
897 * v850.igen: Revert break value back to its old value.
899 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
901 * configure: Regenerated to track ../common/aclocal.m4 changes.
903 Wed Dec 3 17:27:19 1997 Nick Clifton <nickc@cygnus.com>
905 * v850.igen: Make break have a zero first field, since otherwise
906 it clashes with the DIVH instruction.
908 Sat Nov 22 21:32:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
910 * simops.c (OP_10007E0): Rename SIGABRT -> SIM_SIGABRT. Give
911 sim_stopped instead of sim_signalled.
913 * v850.igen (BREAK), simops.c (OP_12007E0): Rename SIGTRAP to
915 (illegal): Rename SIGILL to SIM_SIGILL.
917 * sim-main.h, simops.c, interp.c: Do not include signal.h.
919 * sim-main.h: Include sim-signal.h instead of signal.h.
920 (SIGTRAP, SIGQUIT): Delete definition.
921 (SIG_V850_EXIT): Delete definition.
923 Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com>
925 * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS).
927 Fri Oct 31 10:33:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
929 * interp.c (sim_open): Check state magic number.
930 (sim-assert.h): Include.
932 Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
934 * v850.igen: Add model filter field to records.
936 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
938 * configure: Regenerated to track ../common/aclocal.m4 changes.
940 Fri Sep 26 11:56:02 1997 Felix Lee <flee@cygnus.com>
942 * sim-main.h: delete null override of SIM_ENGINE_HALT_HOOK and
943 SIM_ENGINE_RESTART_HOOK.
945 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
947 * configure: Regenerated to track ../common/aclocal.m4 changes.
949 Wed Sep 24 17:28:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
951 * sim-main.h (WITH_TARGET_WORD_MSB): Delete.
953 * configure.in (SIM_AC_OPTION_BITSIZE): Specify 32 bit
954 architecture with MSB == 31.
956 Wed Sep 24 14:04:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
958 * v850.igen: Make divh insn with RRRRR==0 breakpoint.
960 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
962 * configure: Regenerated to track ../common/aclocal.m4 changes.
964 Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
966 * Makefile.in (SIM_WARNINGS, SIM_ALIGNMENT, SIM_ENDIAN,
967 SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common.
968 (SIM_EXTRA_CFLAGS): Update.
970 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
972 * configure: Regenerated to track ../common/aclocal.m4 changes.
973 * configure.in: Really specify NONSTRICT_ALIGNMENT as the default.
975 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
977 * configure.in: Specify NONSTRICT_ALIGNMENT as the default.
978 * configure: Regenerated to track ../common/aclocal.m4 changes.
980 Fri Sep 19 10:37:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
982 * v850.igen (disp16): Use EXTEND16 to sign extend disp.
983 (disp22): Only shift left by 1, not 2.
984 ("jmp"): Ensure PC is 2 byte aligned.
986 * simops.c, v850.igen: Move "Bcond", "jr", "jarl" code to
987 v850.igen. Fix tracing.
989 * simops.c (OP_300, OP_400, OP_500): Move "sdl.b", "sld.h",
990 "sld.w" insns to v850.igen. Fix tracing.
991 (OP_70): Ditto for "sld.hu".
993 * v850.igen: Clarify tracing of "sld.b", "sld.h" et.al.
995 * simops.c (condition_met): Make global.
997 * sim-main.h (TRACE_ALU_INPUT3, TRACE_BRANCH0, TRACE_LD,
999 (TRACE_LD_NAME): Define.
1001 * simops.c: Move "cmov", "cmov imm" to v850.igen, fix.
1003 Wed Sep 17 16:21:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
1005 * simops.c: Move "mov", "reti", to v850.igen, fix tracing.
1007 * interp.c (hash): Delete.
1009 * v850.igen (nop): Really do nothing.
1011 * interp.c (do_interrupt): Mask interrupts after PSW is saved, not
1013 * v850.igen (reti): Return to current PC not previous.
1015 Wed Sep 17 14:02:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
1017 * simops.c: Move "ctret", "bsw", "hsw" to v850.igen, fix tracing.
1018 (trace_module): Global, save component/module name across insn.
1020 * simops.c: Move "bsh" to v850.igen, fix.
1022 * v850.igen (callt): Load correct number of bytes. Fix tracing.
1023 (stsr, ldsr): Correct src, dest fields. Fix tracing.
1024 (ctret): Force alignment. Fix tracing.
1026 Tue Sep 16 22:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
1028 * simops.c (trace_output): Add result argument.
1029 (trace_result): New function. Simpler version of trace_output,
1030 assumes trace needed.
1031 (trace_output): Call trace_result.
1032 (trace_output): For IMM_REG_REG, trace correct register.
1033 (trace_input): Add case for 16bit immediates.
1034 (OP_600, OP_640, OP_680, OP_6C0, OP_6A0): Use.
1036 * sim-main.h (TRACE_ALU_INPUT, TRACE_ALU_RESULT): Define.
1037 (trace_values, trace_name, trace_pc, trace_num_values): Make
1041 v850.insn (movea, stsr): Use.
1042 (sxb, sxh, zxb, zxh): Ditto.
1044 Tue Sep 16 21:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
1046 * simops.c: Move "movea" from here.
1047 * v850.igen: To here.
1049 * v850.igen (simm16): Define, sign extend imm16.
1050 (uimm16): Define, no sign extension.
1051 (addi, andi, movea, movhi, mulhi, ori, satsubi, xori): Use.
1053 * simops.c: Move "sxh", "switch", "sxb", "callt", "dispose",
1055 * v850.igen: To here.
1056 (switch): Fix off by two error in NIA calc.
1058 Tue Sep 16 15:14:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
1060 * simops.c (trace_pc, trace_name, trace_values, trace_num_values):
1062 (trace_input): Just save pc, name and values for trace_output.
1063 (trace_output): Write trace values to a buffer. Use
1064 trace_one_insn to print trace info and buffer.
1065 (SIZE_OPERANDS, SIZE_LOCATION): Delete.
1067 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1069 * sim-main.h (struct _sim_cpu): Add psw_mask so that reserved bits
1072 * simops.c (OP_2007E0, OP_4007E0): Move "ldsr", "stsr"
1073 instructions from here.
1074 * v850.igen (ldsr, stsr): To here. Mask out reserved bits when
1077 * interp.c (sim_open): Set psw_mask if machine known.
1079 Tue Sep 16 10:20:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1081 * v850-dc: Add rule to diferentiate between breakpoint and divh.
1082 * v850.igen (break): New instruction, breakpoint simulator.
1083 * v850.igen (breakpoint): Enable. Change to a 32bit instruction.
1085 Mon Sep 15 18:44:05 1997 Jim Wilson <wilson@cygnus.com>
1087 * simops.c (Multiply64): Don't store into register zero.
1089 Tue Sep 16 09:02:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1091 * Makefile.in (semantics.o): Add dependency.
1093 * sim-main.h (SAVE_1, SAVE_2): Perform backward compatible save,
1094 do not adjust CIA/NIA.
1096 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
1098 * simops.c (OP_300, OP_400, OP_70): Make behavour depend on PSW[US].
1100 * simops.c: Move "divun", "sld.bu", "divhn", "divhun", "divn",
1101 "divun", "pushml" code from here to v850.igen.
1102 (divun): Make global.
1103 (type3_regs): Make global
1105 * v850.igen: Move simops.c code to here.
1107 * interp.c (sim_create_inferior): For v850eq set US bit by
1110 * interp.c (sim_open): Don't set arch, now set by
1111 sim_analyze_program.
1113 * configure: Regenerated to track ../common/aclocal.m4 changes.
1115 Mon Sep 15 14:39:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
1117 * simops.c (op_types): Move from here.
1118 sim-main.h: To here.
1120 * sim-main.h (trace_input, trace_output), simops.c: Make global.
1122 * simops.c (OP_60): Move "jmp" code from here.
1123 * v850.igen (jmp): To here.
1125 * simops.c (OP_60): Move "sld.bu" code from here.
1126 * v850.igen (sld.bu): To here.
1128 Fri Sep 12 15:11:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
1130 * v850.igen (prepare, ...): Add to v850eq architecture.
1132 * interp.c (sim_open): Default to v850eq.
1134 * interp.c (sim_open): Default to v850e.
1135 * sim-main.h (signal.h): Include.
1137 * v850.igen (illegal): Report/halt illegal instructions.
1139 * Makefile.in (SIM_EXTRA_CFLAGS): Add SIM_RESERVED_BITS.
1141 * configure.in: Add reserved bits option.
1142 * configure: Regenerate.
1144 Thu Sep 11 08:40:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
1146 * interp.c (sim_open): Use sim_do_commandf instead of asprintf.
1148 * sim-main.h (INSN_NAME):
1150 * Makefile.in (INCLUDE): Add SIM_EXTRA_DEPS.
1151 (SIM_EXTRA_DEPS): Add itable.h
1152 (tmp-gencode): Does not depend on simops.h
1154 * sim-main.h (itable.h): Include.
1155 (MAX_INSNS, INSN_NAME): Define.
1157 * interp.c: Compute inttype from the interrupt_names index that
1160 Wed Sep 10 10:25:40 1997 Andrew Cagney <cagney@b1.cygnus.com>
1162 * simops.c (trace_input): Use trace_printf instead of
1164 (trace_output): Ditto.
1165 (trace_input): Only trace when TRACE_ALU_P. Delete code
1166 disasembling instruction.
1167 (trace_output): Only trace when TRACE_ALU_P.
1169 Tue Sep 9 01:29:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
1171 * simops.c (trace_input, trace_output): Use sim_io_printf.
1172 (OP_620): Pass correct argument to trace.
1174 (trace_input): Obtain prog_bfd, text_start et.al from simulator
1177 Mon Sep 8 21:03:52 1997 Andrew Cagney <cagney@b1.cygnus.com>
1179 * v850.igen: New file.
1180 * v850-dc: New file.
1182 Mon Sep 8 18:33:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
1185 * sim-main.h (SEXT16): Delete, use EXTEND16.
1186 (SEXT8): Delete, use EXTEND8.
1187 (SEXT32): Delete, used?
1188 (SEXT40, SEXT44, SEXT64): Use UNSIGNED64 for constants, not ...LL.
1189 (WITH_TARGET_WORD_MSB): Define as 31. v850 little bit endian.
1191 * simops.c: Use EXTEND15 from sim-bits instead of SEXT16.
1193 * sim-main.h (DEBUG_TRACE, DEBUG_VALUES, v850_debug): Delete,
1194 replace with TRACE_INSN_P and TRACE_ALU_P.
1196 * simops.c (trace_input, trace_output): Update.
1198 * interp.c (sim_engine_run): Delete.
1199 (lookup_hash): Delete.
1200 (sim_open): Do not fill hash table.
1201 (sim_trace): Delete.
1203 Fri Sep 5 17:04:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1205 * simops.c (OP_FFFF): Use sim_engine_halt.
1206 (OP_12007E0): Ditto.
1207 (OP_10007E0): Ditto.
1209 * sim-main.h (struct sim_cpu): Delete member exception. Using
1212 * interp.c (sim_info): Do not do anything in sim-info.
1213 (sim_stop): Delete, replace with sim-stop.
1214 (sim_stop_reason): Delete, replace with sim-reason.
1216 * sim-main.h (WITH_WATCHPOINTS): Define.
1217 (WITH_MODULO_MEMORY): Define
1219 * Makefile.in (SIM_OBJS): Add sim-resume, sim-watch, sim-stop,
1222 * interp.c (enum interrupt_cond_type): Delete.
1223 (struct interrupt_generator): Delete.
1224 (enum interrupt_type): Drop int_none.
1225 (sim_open): Initialize WATCHPOINT module.
1226 (sim_resume, sim_run): Rename sim_resume to sim_run.
1227 (sim_engine_run): Replace interrupt code with call to sim-events.
1228 (sim_set_interrupt): Delete.
1229 (sim_parse_number): Delete.
1231 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1233 * configure: Regenerated to track ../common/aclocal.m4 changes.
1235 Thu Sep 4 18:11:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
1237 * simops.c (fetch_argv): New function, fetch a arg vector from
1240 * configure.in: Check for fork, execve, execv.
1241 * configure: Regenerate.
1243 * interp.c (sim_store_register, sim_fetch_register): Use H2T_4 and
1244 T2H_4 for byte swapping.
1246 * sim-main.h, interp.c (get_word, get_half, get_byte, put_word,
1247 put_half, put_byte): Delete.
1249 * Makefile.in (SIM_OBJS): Add sim-memopt.o module.
1251 * sim-main.h (load_mem, store_mem): Redefine as macros.
1252 (IMEM, IMEM_IMMED): New macros - fetch instructions.
1254 * simops.c (OP_10007E0): For SYS_read, SYS_write, SYS_open
1255 transfer data via a buffer.
1256 (fetch_str): New function, fetch string from memory.
1258 * Makefile.in (SIM_OBJS): Add sim-hrw.o module.
1260 * interp.c (sim_open): Establish memory maps using sim-memopt.c
1262 (sim_do_command): Print error if memory-map command is used. Call
1264 (map): Delete, replaced by sim-core.
1265 (sim_memory_init): Delete, replaced by sim-core.
1266 (sim_set_memory_map): Delete, replaced by sim-memopt.
1267 (load_mem): Delete, replaced by sim-core.
1268 (store_mem): Delete, replaced by sim-core.
1269 (sim_write): Delete, replaced by sim-hrw.
1270 (sim_read): Delete, replaced by sim-hrw.
1272 * sim-main.h (struct sim_state): Remove memory members, using
1275 Wed Sep 3 10:18:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1277 * sim-main.h: Replace SIM_HAVE_FLATMEM with mem ptr.
1278 * interp.c (map): Do not add to a void pointer.
1280 * Makefile.in (INCLUDE): Add sim-main.h
1282 * configure.in: Check for time.h
1283 * configure: Re-generate.
1285 * interp.c (struct interrupt_generator): Make time unsigned long,
1287 (sim_resume): Make oldpc SIM_ADDR.
1288 (struct hash_entry): Make mask/opcode unsigned.
1290 * v850_sim.h (struct simops ): Make opcode and mask unsigned.
1292 * simops.c (utime.h): Include if available.
1293 (OP_10007E0): Check for UTIME function.
1294 (divun): Put parentheses around shift argument.
1295 (OP_640): Put parentheses around shift argument, was wrong.
1296 (OP_107F0): Return something.
1298 * interp.c (sim_parse_number): Use strtoul not strtol.
1299 (sim_resume): Use sim_elapsed_time_get to keep track of the time.
1301 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
1302 (SIM_AC_OPTION_ENDIAN): Set to hardwired big.
1303 (SIM_AC_OPTION_HOST_ENDIAN): Add.
1304 (AC_CHECK_FUNCS): Add utime.
1305 (AC_CHECK_HEADERS): Add stdlib.h, string.h, strings.h, utime.h
1306 configure: Regenerate.
1309 * Makefile.in (SIM_RUN_OBJS): Use nrun.o.
1310 (SIM_OBJS): Add sim-io.o, sim-hload.o, sim-utils.o, sim-options.o,
1311 sim-config.o, sim-module.o, sim-events.o, sim-core.o,
1312 sim-endian.o, sim-engine.o, sim-trace.o, sim-profile.o
1313 (SIM_ENDIAN, SIM_WARNGINS): Define.
1315 * simops.c (OP_10007E0): Use sim_io_* for transfers.
1317 * interp.c (sim_resume): Pass sd around.
1319 * simops.c (sim-main.h): Include.
1321 * gencode.c (write_template): Generate #include sim-main.h.
1322 (write_opcodes): Ditto.
1324 * interp.c (prog_bfd, prog_bfd_was_opened_p): Delete.
1325 (v850_callback): Ditto.
1326 (sim_kind, myname): Ditto.
1327 (lookup_hash): Pass SD. Use sim_io_error.
1328 (sim_set_memory_map): Pass in SD, use.
1329 (init_system): Pass in SD, use.
1331 (sim_set_profile): Delete.
1332 (sim_set_profile_size): Delete.
1333 (do_interrupt): Pass in SD, use.
1334 (sim_info): Use sim_io_printf.
1335 (sim_create_inferior): Reset registers. Set PC from prog_bfd
1337 (sim_load): Delete, use common/sim-hload.c
1338 (sim_size): Rename to sim_memory_init.
1339 (sim_write): Remove call to init_system.
1340 (init_system): Delete.
1341 (sim_set_callbacks): Delete.
1342 (sim_set_interrupt): Pass in SD, use.
1343 (start_time): Delete.
1345 * v850_sim.h: Remove everything except `struct simops' from here.
1346 * sim-main.h: Move most to here.
1347 * gencode.c: Move #includes to here.
1349 * sim-main.h(struct _sim_cpu): Rename struct _state.
1350 (#define PC, et.al.): Update
1351 (v850_callback): Delete. Replaced with SIM_DESC arg.
1352 (int8, uint8, int16, uint16, int32, uint32): Define types using
1353 unsigned8 et.al from common/sim-types.h.
1354 * sim-main.h (State): Define as STATE_CPU.
1356 Mon Sep 1 12:07:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1358 * configure.in: Check for time, chmod.
1359 * configure: Regenerate.
1360 * simops.c (SYS_time, SYS_chmod): Use HAVE_TIME, HAVE_CHMOD.
1362 * simops.c (../../libgloss/v850/sys/syscall.h): Include instead of
1364 (OP_10007E0): Check the existance each SYS_* macro independantly.
1366 * v850_sim.h (SIGQUIT, SIGTRAP): Only define if missing.
1368 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1370 * configure: Regenerated to track ../common/aclocal.m4 changes.
1373 Tue Aug 26 10:42:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1375 * interp.c (sim_kill): Delete.
1376 (sim_create_inferior): Add ABFD argument.
1377 (sim_load): Move setting of PC from here.
1378 (sim_create_inferior): To here.
1380 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1382 * configure: Regenerated to track ../common/aclocal.m4 changes.
1385 Mon Aug 25 11:31:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1387 * interp.c (sim_open): Add ABFD argument.
1389 Fri Aug 22 10:39:28 1997 Nick Clifton <nickc@cygnus.com>
1391 * simops.c (bsh): Only set CY flag if either of the bottom
1394 * simops.c (prepare, dispose): Lower numbered
1395 registers go to higher numbered address.
1397 * simops.c (unsigned divide instructions): S bit set if result has
1400 * simops.c (pushml, pushmh, popml, popmh): Lower numbered
1401 registers go to higher numbered address.
1403 Wed Aug 20 13:56:35 1997 Nick Clifton <nickc@cygnus.com>
1405 * simops.c (OP_107E0, OP_107F0, OP_307E0, OP_307F0): Use correct
1406 interpretation of SR bit in list18 structure.
1407 (divn, divun): New functions to perform N step divide functions.
1409 Mon Aug 18 10:59:02 1997 Nick Clifton <nickc@cygnus.com>
1411 * simops.c (OP_300, OP_400, OP_60, OP_70): Support variant opcodes
1412 with US bit set in the PSW.
1414 Wed Aug 13 19:06:55 1997 Nick Clifton <nickc@cygnus.com>
1416 * interp.c (sim_resume): Opcode functions return amount to be
1417 added to PC and all opcodes take a standard format in the OP[]
1420 (do_format_*): Functions removed.
1422 * v850_sim.h (SP, EP): New register mnemonics.
1424 * gencode.c (write_header): Functions prototypes return an
1427 * simops.c: Opcode functions return amount to be added to PC.
1429 * v850_sim.h (CTPC, CTPSW, CTBP): New register mnemonics.
1431 * simops.c: Add support for v850e instructions.
1433 * simops.c: Add support for v850eq instructions.
1435 Tue May 20 10:24:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1437 * interp.c (sim_open): Add callback argument.
1438 (sim_set_callbacks): Delete SIM_DESC argument.
1440 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1442 * configure: Regenerated to track ../common/aclocal.m4 changes.
1444 Wed Apr 23 17:20:16 1997 Doug Evans <dje@canuck.cygnus.com>
1446 * interp.c (prog_bfd_was_opened_p): New static local.
1447 (prog_bfd): New global variable.
1448 (sim_open): Undo patch to add -E support.
1449 (sim_close): Close prog_bfd if sim_load opened it.
1450 (sim_load): Record bfd of loaded file in prog_bfd.
1451 * simops.c (prog_bfd): Renamed from exec_bfd.
1453 Fri Apr 18 14:17:12 1997 Andrew Cagney <cagney@b1.cygnus.com>
1455 * interp.c (sim_stop): Stub function.
1457 Thu Apr 17 03:53:18 1997 Doug Evans <dje@canuck.cygnus.com>
1459 * Makefile.in (SIM_OBJS): Add sim-load.o.
1460 * interp.c (sim_kind, myname): New static locals.
1461 (sim_open): Set sim_kind, myname. Ignore -E arg.
1462 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
1463 load file into simulator. Set start address from bfd.
1464 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1466 Wed Apr 16 19:53:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1468 * simops.c (OP_10007E0): Only provide system calls SYS_execv,
1469 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
1471 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1473 * configure: Regenerated to track ../common/aclocal.m4 changes.
1476 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1478 * interp.c (sim_open): New arg `kind'.
1480 * configure: Regenerated to track ../common/aclocal.m4 changes.
1482 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1484 * configure: Regenerated to track ../common/aclocal.m4 changes.
1486 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1488 * configure: Regenerated to track ../common/aclocal.m4 changes.
1490 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1492 * configure: Re-generate.
1494 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1496 * configure: Regenerate to track ../common/aclocal.m4 changes.
1498 Thu Mar 13 13:00:54 1997 Doug Evans <dje@canuck.cygnus.com>
1500 * interp.c (sim_open): New SIM_DESC result. Argument is now
1502 (other sim_*): New SIM_DESC argument.
1504 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
1506 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1507 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1508 * configure.in: sinclude ../common/aclocal.m4.
1509 * configure: Regenerated.
1511 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1513 * configure configure.in Makefile.in: Update to new configure
1514 scheme which is more compatible with WinGDB builds.
1515 * configure.in: Improve comment on how to run autoconf.
1516 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1517 * Makefile.in: Use autoconf substitution to install common
1520 Mon Jan 20 16:05:34 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1522 * simops.c (OP_{E0,2E0,6E0}): The multiply operations sign extend,
1525 Tue Jan 14 17:06:03 1997 Stu Grossman (grossman@critters.cygnus.com)
1527 * simops.c: Put ifdefs around things to make MSVC happy. Get rid
1528 of unistd.h. Disable SYS_stat, SYS_chown, SYS_time, SYS_times,
1529 SYS_gettimeofday and SYS_utime from MSVC.
1531 Tue Dec 31 18:11:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1533 * simops.c (OP_10007E0): Know that kill encodes the signal number
1534 via: 0xdead0000 | signal and turn it back into a signal.
1536 Fri Dec 27 14:44:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1538 * v850_sim.h (SIG_V850_EXIT): Define as -1.
1540 * interp.c (sim_open): Cast calloc function.
1541 (sim_stop_reason): If signal is SIG_V850_EXIT, inform gdb the
1542 program exited with the appropriate exit code.
1543 (sim_set_interrupt): Declare buildargv.
1545 * simops.c (OP_10007E0): Make exit signal normal exit. Make time
1546 type correct and work on big endian systems.
1548 Wed Nov 20 02:18:44 1996 Doug Evans <dje@canuck.cygnus.com>
1550 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
1551 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
1552 * configure.in: Simplify using macros in ../common/aclocal.m4.
1553 Call AC_CHECK_HEADERS(unistd.h).
1554 * configure: Regenerated.
1555 * config.in: New file.
1556 * simops.c: #include "config.h". #include <unistd.h> if present.
1558 Sun Nov 3 23:02:54 1996 Stan Shebs <shebs@andros.cygnus.com>
1560 * v850_sim.h (State): New slots dummy_mem, pending_nmi.
1561 (EIPC, etc): New macros for system registers.
1562 * simops.c, interp.c: Use everywhere.
1564 * interp.c: Add support for interrupts issued by interrupt
1565 generators, either PC- or time-based. Controlled by simulator
1566 command "sim interrupt".
1568 * interp.c: Add support for variable-size allocation of memory,
1569 via simulator command "sim memory-map".
1570 (map): Issue SIGSEGV for references to invalid memory regions.
1572 Thu Oct 31 14:44:10 1996 Gavin Koch <gavin@cygnus.com>
1574 * simops.c: Include <sys/time.h> for struct timeval and
1577 Wed Oct 30 08:49:10 1996 Jeffrey A Law (law@cygnus.com)
1579 * simops.c (OP_10007E0): Handle SYS_times and SYS_gettimeofday.
1581 * simops.c (OP_10007E0): Handle SYS_time.
1583 Tue Oct 29 14:22:55 1996 Jeffrey A Law (law@cygnus.com)
1585 * simops.c: Include <sys/stat.h>.
1586 (OP_10007E0): Handle SYS_stat.
1588 Thu Oct 24 12:26:35 1996 Jeffrey A Law (law@cygnus.com)
1590 * simops.c (OP_10007E0): Don't declare errno.
1592 * simops.c (OP_500): Mask off low bit in displacement
1594 (OP_501): Similarly.
1596 * simops.c (OP_500): Fix displacement handling for sld.w.
1597 (OP_501): Similarly for sst.w.
1599 * simops.c (trace_input): Remove all references to SEXT7.
1600 (OP_300, OP_400, OP_500, OP_380, OP_480, OP_501): Displacement
1601 is zero extended for sst/sld instructions.
1602 * v850_sim.h (SEX7): Delete. It's no longer needed (and it
1603 was incorrect anyway).
1605 Thu Oct 24 10:33:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1607 * Makefile.in: Get rid of srcroot. Set all INSTALL macros via
1609 * gencode.c (write_opcodes): Pad operands field to account for
1611 * simops.c: Include errno.h. Exclude SYS_chown, since MSVC
1612 doesn't support it. (Why is this here in the first place?!?)
1613 * v850_sim.h: Get rid of 64 bit defs. Also, get rid of #elif's.
1614 Change number of operands in struct simops from 9 to 6. Define
1615 SIGTRAP and SIGQUIT for MSVC.
1617 Tue Oct 15 16:19:51 1996 Stu Grossman (grossman@critters.cygnus.com)
1619 * interp.c (MEM_SIZE): It's now bytes, not a power of 2.
1620 * (map): Add support for external mem in the 1->2 meg range.
1621 Also, abort() when memory access is way out of bounds. (Better to
1622 die than to give wrong result. (This will be fixed later.))
1623 * (sim_size): MEM_SIZE is now bytes, not shift factor.
1625 Tue Oct 1 15:53:24 1996 Gavin Koch <gavin@cygnus.com>
1627 * simops.c (trace_input): Swapped order of operands for output
1628 output of OP_IMM_REG. Changed the fetching of the operands for
1629 OP_LOAD32, and OP_STORE32 to work like op-function.
1631 Mon Sep 30 15:46:33 1996 Stu Grossman (grossman@critters.cygnus.com)
1633 * interp.c: Move includes of remote-sim.h and callback.h to
1635 * (lookup_hash): Add PC to report of hash failure.
1636 * (map load_mem store_mem): New memory subsystem. Models V851
1638 * (sim_write sim_read): Use new memory subsystem.
1639 * (sim_resume): Don't load and save PC into EIPC anymore. Needed
1640 to make user-defined traps work right.
1641 * simops.c (OP_*): Use new memory subsystem.
1642 * (OP_14007E0 (reti)): Implement reti.
1643 * (OP_14996E0 (trap)): Implement user-defined traps. Move I/O to
1644 trap 31. Use new memory subsystem.
1645 * v850_sim.h: Prototypes for load_mem, store_mem and map. Use
1646 load_mem in RLW macro.
1648 Fri Sep 27 18:34:09 1996 Stu Grossman (grossman@critters.cygnus.com)
1650 * gencode.c (write_opcodes): Output hex values for opcode mask
1652 * interp.c (sim_resume): Save and restore PC from the appropriate
1654 * (sim_fetch_register sim_store_register): Fix byte-order problem
1655 with reading and writing registers.
1656 * simops.c (OP_FFFF): Implement pseudo-breakpoint insn.
1658 Fri Sep 27 17:42:37 1996 Jeffrey A Law (law@cygnus.com)
1660 * simops.c (trace_input): Fix thinko.
1662 Wed Sep 18 09:54:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1664 * simops.c (exec_bfd): Rename from sim_bfd.
1665 (trace_input): Ditto.
1667 Thu Sep 12 12:03:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1669 * simops.c (trace_input): Use find_nearest_line to print line
1670 number, function name or file name of PC.
1672 Wed Sep 11 16:44:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1674 * simops.c: Add tracing support. Use SEXTxx macros instead of
1675 doing hardwired shifts.
1677 * configure.in (--enable-sim-cflags): Add switch to add additional
1678 flags to simulator buld. If --enable-sim-cflags=trace, turn on
1680 * configure: Regenerate.
1682 * Makefile.in: Don't require a VPATH capable make if configuring
1683 in the same directory. Don't use CFLAGS for configuration flags.
1684 Add flags from --enable-sim-cflags. Support canadian cross
1685 builds. Rebuild whole simulator if include files change.
1687 * interp.c (v850_debug): New global for debugging.
1688 (lookup_hash,sim_size,sim_set_profile): Use
1689 printf_filtered callback, instead of calling printf directly.
1690 (sim_{open,trace}): Enable tracing if -t and compiled for tracing.
1692 * v850_sim.h: Use limits.h to set the various sized types.
1693 (SEXT{5,7,16,22}): New macros.
1695 Mon Sep 9 20:50:46 1996 Jeffrey A Law (law@cygnus.com)
1697 * interp.c (hash): Make this an inline function
1698 when compiling with GCC. Simplify.
1699 * simpos.c: Explicitly include "sys/syscall.h". Remove
1700 some #if 0'd code. Enable more emulated syscalls.
1702 Wed Sep 4 01:48:55 1996 Jeffrey A Law (law@cygnus.com)
1704 * interp.c: Fix sign bit handling for add and sub instructions.
1706 Tue Sep 3 10:20:30 1996 Jeffrey A Law (law@cygnus.com)
1708 * gencode.c: Fix various indention & style problems.
1709 Remove test code. Remove #if 0 code.
1710 * interp.c: Provide prototypes for all static functions.
1711 Fix minor indention problems.
1712 (sim_open, sim_resume): Remove unused variables.
1713 (sim_read): Return type is "int".
1714 * simops.c: Remove unused variables.
1715 (divh): Make result of divide-by-zero zero.
1716 (setf): Initialize result to keep compiler quiet.
1717 (sar instructions): These just clear the overflow bit.
1718 * v850_sim.h: Provide prototypes for put_byte, put_half
1721 * interp.c: OP should be an array of 32bit operands!
1722 (v850_callback): Declare.
1723 (do_format_5): Fix extraction of OP[0].
1724 (sim_size): Remove debugging printf.
1725 (sim_set_callbacks): Do something useful.
1726 (sim_stop_reason): Gross hacks to get c-torture running.
1727 * simops.c: Simplify code for computing targets of bCC
1728 insns. Invert 's' bit if 'ov' bit is set for some
1729 instructions. Fix 'cy' bit handling for numerous
1730 instructions. Make the simulator stop when a halt
1731 instruction is encountered. Very crude support for
1732 emulated syscalls (trap 0).
1733 * v850_sim.h: Include "callback.h" and declare
1734 v850_callback. Items in the operand array are 32bits.
1736 Sun Sep 1 22:35:35 1996 Jeffrey A Law (law@cygnus.com)
1738 * interp.c (sim_resume): Fix code to check for a format 3
1740 * simops.c: bCC insns only argument is a constant, not a
1741 register value (duh...)
1743 Fri Aug 30 10:33:49 1996 Jeffrey A Law (law@cygnus.com)
1745 * simops.c: Fix "not1" and "set1".
1747 * simops.c: Don't forget to initialize temp for
1750 * interp.c: Remove various debugging printfs.
1752 * simops.c: Fix satadd, satsub boundary case handling.
1754 * interp.c (hash): Fix.
1755 * interp.c (do_format_8): Get operands correctly and
1756 call the target function.
1757 * simops.c: Rough cut at "clr1", "not1", "set1", and "tst1".
1759 Thu Aug 29 13:53:29 1996 Jeffrey A Law (law@cygnus.com)
1761 * interp.c (do_format_4): Get operands correctly and
1762 call the target function.
1763 * simops.c: Rough cut at "sld.b", "sld.h", "sld.w", "sst.b",
1764 "sst.h", and "sst.w".
1766 * v850_sim.h: The V850 doesn't have split I&D spaces. Change
1767 accordingly. Remove many unused definitions.
1768 * interp.c: The V850 doesn't have split I&D spaces. Change
1770 (get_longlong, get_longword, get_word): Deleted.
1771 (write_longlong, write_longword, write_word): Deleted.
1772 (get_operands): Deleted.
1773 (get_byte, get_half, get_word): New functions.
1774 (put_byte, put_half, put_word): New functions.
1775 * simops.c: Remove unused functions. Rough cut at
1776 "ld.b", "ld.h", "ld.w", "st.b", "st.h", "st.w" insns.
1778 * v850_sim.h (struct _state): Remove "psw" field. Add
1780 (PSW): Remove bogus definition.
1781 * simops.c: Change condition code handling to use the psw
1782 register within the sregs array. Handle "ldsr" and "stsr".
1784 * simops.c: Handle "satadd", "satsub", "satsubi", "satsubr".
1786 * interp.c (do_format_5): Get operands correctly and
1787 call the target function.
1788 (sim_resume): Don't do a PC update for format 5 instructions.
1789 * simops.c: Handle "jarl" and "jmp" instructions.
1791 * simops.c: Fix minor typos. Handle "cmp", "setf", "tst"
1792 "di", and "ei" instructions correctly.
1794 * interp.c (do_format_3): Get operands correctly and call
1795 the target function.
1796 * simops.c: Handle bCC instructions.
1798 * simops.c: Add condition code handling to shift insns.
1799 Fix minor typos in condition code handling for other insns.
1801 * Makefile.in: Fix typo.
1802 * simops.c: Add condition code handling to "sub" "subr" and
1803 "divh" instructions.
1805 * interp.c (hash): Update to be more accurate.
1806 (lookup_hash): Call hash rather than computing the hash
1808 (do_format_1_2): Handle format 1 and format 2 instructions.
1809 Get operands correctly and call the target function.
1810 (do_format_6): Get operands correctly and call the target
1812 (do_formats_9_10): Rough cut so shift ops will work.
1813 (sim_resume): Tweak to deal with format 1 and format 2
1814 handling in a single funtion. Don't update the PC
1815 for format 3 insns. Fix typos.
1816 * simops.c: Slightly reorganize. Add condition code handling
1817 to "add", "addi", "and", "andi", "or", "ori", "xor", "xori"
1818 and "not" instructions.
1819 * v850_sim.h (reg_t): Registers are 32bits.
1820 (_state): The V850 has 32 general registers. Add a 32bit
1821 psw and pc register too. Add accessor macros
1823 * Makefile.in, interp.c, v850_sim.h: Bring over endianness
1824 changes from the d10v simulator.
1826 * simops.c: Add shift support.
1828 * simops.c: Add multiply & divide support. Abort for system
1831 * simops.c: Add logicals, mov, movhi, movea, add, addi, sub
1832 and subr. No condition codes yet.
1834 Wed Aug 28 13:53:22 1996 Jeffrey A Law (law@cygnus.com)
1836 * ChangeLog, Makefile.in, configure, configure.in, v850_sim.h,
1837 gencode.c, interp.c, simops.c: Created.