ALSA: bebob: Add support for M-Audio special Firewire series
[deliverable/linux.git] / sound / firewire / Kconfig
1 menuconfig SND_FIREWIRE
2 bool "FireWire sound devices"
3 depends on FIREWIRE
4 default y
5 help
6 Support for IEEE-1394/FireWire/iLink sound devices.
7
8 if SND_FIREWIRE && FIREWIRE
9
10 config SND_FIREWIRE_LIB
11 tristate
12 depends on SND_PCM
13
14 config SND_DICE
15 tristate "DICE-based DACs (EXPERIMENTAL)"
16 select SND_HWDEP
17 select SND_PCM
18 select SND_FIREWIRE_LIB
19 help
20 Say Y here to include support for many DACs based on the DICE
21 chip family (DICE-II/Jr/Mini) from TC Applied Technologies.
22
23 At the moment, this driver supports playback only. If you
24 want to use devices that support capturing, use FFADO instead.
25
26 To compile this driver as a module, choose M here: the module
27 will be called snd-dice.
28
29 config SND_FIREWIRE_SPEAKERS
30 tristate "FireWire speakers"
31 select SND_PCM
32 select SND_FIREWIRE_LIB
33 help
34 Say Y here to include support for the Griffin FireWave Surround
35 and the LaCie FireWire Speakers.
36
37 To compile this driver as a module, choose M here: the module
38 will be called snd-firewire-speakers.
39
40 config SND_ISIGHT
41 tristate "Apple iSight microphone"
42 select SND_PCM
43 select SND_FIREWIRE_LIB
44 help
45 Say Y here to include support for the front and rear microphones
46 of the Apple iSight web camera.
47
48 To compile this driver as a module, choose M here: the module
49 will be called snd-isight.
50
51 config SND_SCS1X
52 tristate "Stanton Control System 1 MIDI"
53 select SND_PCM
54 select SND_RAWMIDI
55 select SND_FIREWIRE_LIB
56 help
57 Say Y here to include support for the MIDI ports of the Stanton
58 SCS.1d/SCS.1m DJ controllers. (SCS.1m audio is still handled
59 by FFADO.)
60
61 To compile this driver as a module, choose M here: the module
62 will be called snd-scs1x.
63
64 config SND_FIREWORKS
65 tristate "Echo Fireworks board module support"
66 select SND_FIREWIRE_LIB
67 select SND_RAWMIDI
68 select SND_PCM
69 select SND_HWDEP
70 help
71 Say Y here to include support for FireWire devices based
72 on Echo Digital Audio Fireworks board:
73 * Mackie Onyx 400F/1200F
74 * Echo AudioFire12/8(until 2009 July)
75 * Echo AudioFire2/4/Pre8/8(since 2009 July)
76 * Echo Fireworks 8/HDMI
77 * Gibson Robot Interface Pack/GoldTop
78
79 To compile this driver as a module, choose M here: the module
80 will be called snd-fireworks.
81
82 config SND_BEBOB
83 tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
84 select SND_FIREWIRE_LIB
85 select SND_RAWMIDI
86 select SND_PCM
87 select SND_HWDEP
88 help
89 Say Y here to include support for FireWire devices based
90 on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
91 * Edirol FA-66/FA-101
92 * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
93 * BridgeCo RDAudio1/Audio5
94 * Mackie Onyx 1220/1620/1640 (Firewire I/O Card)
95 * Mackie d.2 (Firewire Option)
96 * Stanton FinalScratch 2 (ScratchAmp)
97 * Tascam IF-FW/DM
98 * Behringer XENIX UFX 1204/1604
99 * Behringer Digital Mixer X32 series (X-UF Card)
100 * Apogee Rosetta 200/400 (X-FireWire card)
101 * Apogee DA/AD/DD-16X (X-FireWire card)
102 * Apogee Ensemble
103 * ESI Quotafire610
104 * AcousticReality eARMasterOne
105 * CME MatrixKFW
106 * Phonic Helix Board 12 MkII/18 MkII/24 MkII
107 * Phonic Helix Board 12 Universal/18 Universal/24 Universal
108 * Lynx Aurora 8/16 (LT-FW)
109 * ICON FireXon
110 * PrismSound Orpheus/ADA-8XR
111 * TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
112 * Terratec EWS MIC2/EWS MIC4
113 * Terratec Aureon 7.1 Firewire
114 * Yamaha GO44/GO46
115 * Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
116 * M-Audio Firewire410/AudioPhile/Solo
117 * M-Audio Ozonic/NRV10/ProfireLightBridge
118 * M-Audio Firewire 1814/ProjectMix IO
119
120 To compile this driver as a module, choose M here: the module
121 will be called snd-bebob.
122
123 endif # SND_FIREWIRE
This page took 0.048716 seconds and 5 git commands to generate.