sound/pci/ice1712/quartet.c

   1 /*
   2  *   ALSA driver for ICEnsemble VT1724 (Envy24HT)
   3  *
   4  *   Lowlevel functions for Infrasonic Quartet
   5  *
   6  *      Copyright (c) 2009 Pavel Hofman <pavel.hofman@ivitera.com>
   7  *
   8  *
   9  *   This program is free software; you can redistribute it and/or modify
  10  *   it under the terms of the GNU General Public License as published by
  11  *   the Free Software Foundation; either version 2 of the License, or
  12  *   (at your option) any later version.
  13  *
  14  *   This program is distributed in the hope that it will be useful,
  15  *   but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *   GNU General Public License for more details.
  18  *
  19  *   You should have received a copy of the GNU General Public License
  20  *   along with this program; if not, write to the Free Software
  21  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  22  *
  23  */
  24
  25 #include <linux/delay.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/init.h>
  28 #include <linux/slab.h>
  29 #include <sound/core.h>
  30 #include <sound/tlv.h>
  31 #include <sound/info.h>
  32
  33 #include "ice1712.h"
  34 #include "envy24ht.h"
  35 #include <sound/ak4113.h>
  36 #include "quartet.h"
  37
  38 struct qtet_spec {
  39         struct ak4113 *ak4113;
  40         unsigned int scr;       /* system control register */
  41         unsigned int mcr;       /* monitoring control register */
  42         unsigned int cpld;      /* cpld register */
  43 };
  44
  45 struct qtet_kcontrol_private {
  46         unsigned int bit;
  47         void (*set_register)(struct snd_ice1712 *ice, unsigned int val);
  48         unsigned int (*get_register)(struct snd_ice1712 *ice);
  49         const char * const texts[2];
  50 };
  51
  52 enum {
  53         IN12_SEL = 0,
  54         IN34_SEL,
  55         AIN34_SEL,
  56         COAX_OUT,
  57         IN12_MON12,
  58         IN12_MON34,
  59         IN34_MON12,
  60         IN34_MON34,
  61         OUT12_MON34,
  62         OUT34_MON12,
  63 };
  64
  65 static const char * const ext_clock_names[3] = {"IEC958 In", "Word Clock 1xFS",
  66         "Word Clock 256xFS"};
  67
  68 /* chip address on I2C bus */
  69 #define AK4113_ADDR             0x26    /* S/PDIF receiver */
  70
  71 /* chip address on SPI bus */
  72 #define AK4620_ADDR             0x02    /* ADC/DAC */
  73
  74
  75 /*
  76  * GPIO pins
  77  */
  78
  79 /* GPIO0 - O - DATA0, def. 0 */
  80 #define GPIO_D0                 (1<<0)
  81 /* GPIO1 - I/O - DATA1, Jack Detect Input0 (0:present, 1:missing), def. 1 */
  82 #define GPIO_D1_JACKDTC0        (1<<1)
  83 /* GPIO2 - I/O - DATA2, Jack Detect Input1 (0:present, 1:missing), def. 1 */
  84 #define GPIO_D2_JACKDTC1        (1<<2)
  85 /* GPIO3 - I/O - DATA3, def. 1 */
  86 #define GPIO_D3                 (1<<3)
  87 /* GPIO4 - I/O - DATA4, SPI CDTO, def. 1 */
  88 #define GPIO_D4_SPI_CDTO        (1<<4)
  89 /* GPIO5 - I/O - DATA5, SPI CCLK, def. 1 */
  90 #define GPIO_D5_SPI_CCLK        (1<<5)
  91 /* GPIO6 - I/O - DATA6, Cable Detect Input (0:detected, 1:not detected */
  92 #define GPIO_D6_CD              (1<<6)
  93 /* GPIO7 - I/O - DATA7, Device Detect Input (0:detected, 1:not detected */
  94 #define GPIO_D7_DD              (1<<7)
  95 /* GPIO8 - O - CPLD Chip Select, def. 1 */
  96 #define GPIO_CPLD_CSN           (1<<8)
  97 /* GPIO9 - O - CPLD register read/write (0:write, 1:read), def. 0 */
  98 #define GPIO_CPLD_RW            (1<<9)
  99 /* GPIO10 - O - SPI Chip Select for CODEC#0, def. 1 */
 100 #define GPIO_SPI_CSN0           (1<<10)
 101 /* GPIO11 - O - SPI Chip Select for CODEC#1, def. 1 */
 102 #define GPIO_SPI_CSN1           (1<<11)
 103 /* GPIO12 - O - Ex. Register Output Enable (0:enable, 1:disable), def. 1,
 104  * init 0 */
 105 #define GPIO_EX_GPIOE           (1<<12)
 106 /* GPIO13 - O - Ex. Register0 Chip Select for System Control Register,
 107  * def. 1 */
 108 #define GPIO_SCR                (1<<13)
 109 /* GPIO14 - O - Ex. Register1 Chip Select for Monitor Control Register,
 110  * def. 1 */
 111 #define GPIO_MCR                (1<<14)
 112
 113 #define GPIO_SPI_ALL            (GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK |\
 114                 GPIO_SPI_CSN0 | GPIO_SPI_CSN1)
 115
 116 #define GPIO_DATA_MASK          (GPIO_D0 | GPIO_D1_JACKDTC0 | \
 117                 GPIO_D2_JACKDTC1 | GPIO_D3 | \
 118                 GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK | \
 119                 GPIO_D6_CD | GPIO_D7_DD)
 120
 121 /* System Control Register GPIO_SCR data bits */
 122 /* Mic/Line select relay (0:line, 1:mic) */
 123 #define SCR_RELAY               GPIO_D0
 124 /* Phantom power drive control (0:5V, 1:48V) */
 125 #define SCR_PHP_V               GPIO_D1_JACKDTC0
 126 /* H/W mute control (0:Normal, 1:Mute) */
 127 #define SCR_MUTE                GPIO_D2_JACKDTC1
 128 /* Phantom power control (0:Phantom on, 1:off) */
 129 #define SCR_PHP                 GPIO_D3
 130 /* Analog input 1/2 Source Select */
 131 #define SCR_AIN12_SEL0          GPIO_D4_SPI_CDTO
 132 #define SCR_AIN12_SEL1          GPIO_D5_SPI_CCLK
 133 /* Analog input 3/4 Source Select (0:line, 1:hi-z) */
 134 #define SCR_AIN34_SEL           GPIO_D6_CD
 135 /* Codec Power Down (0:power down, 1:normal) */
 136 #define SCR_CODEC_PDN           GPIO_D7_DD
 137
 138 #define SCR_AIN12_LINE          (0)
 139 #define SCR_AIN12_MIC           (SCR_AIN12_SEL0)
 140 #define SCR_AIN12_LOWCUT        (SCR_AIN12_SEL1 | SCR_AIN12_SEL0)
 141
 142 /* Monitor Control Register GPIO_MCR data bits */
 143 /* Input 1/2 to Monitor 1/2 (0:off, 1:on) */
 144 #define MCR_IN12_MON12          GPIO_D0
 145 /* Input 1/2 to Monitor 3/4 (0:off, 1:on) */
 146 #define MCR_IN12_MON34          GPIO_D1_JACKDTC0
 147 /* Input 3/4 to Monitor 1/2 (0:off, 1:on) */
 148 #define MCR_IN34_MON12          GPIO_D2_JACKDTC1
 149 /* Input 3/4 to Monitor 3/4 (0:off, 1:on) */
 150 #define MCR_IN34_MON34          GPIO_D3
 151 /* Output to Monitor 1/2 (0:off, 1:on) */
 152 #define MCR_OUT34_MON12         GPIO_D4_SPI_CDTO
 153 /* Output to Monitor 3/4 (0:off, 1:on) */
 154 #define MCR_OUT12_MON34         GPIO_D5_SPI_CCLK
 155
 156 /* CPLD Register DATA bits */
 157 /* Clock Rate Select */
 158 #define CPLD_CKS0               GPIO_D0
 159 #define CPLD_CKS1               GPIO_D1_JACKDTC0
 160 #define CPLD_CKS2               GPIO_D2_JACKDTC1
 161 /* Sync Source Select (0:Internal, 1:External) */
 162 #define CPLD_SYNC_SEL           GPIO_D3
 163 /* Word Clock FS Select (0:FS, 1:256FS) */
 164 #define CPLD_WORD_SEL           GPIO_D4_SPI_CDTO
 165 /* Coaxial Output Source (IS-Link) (0:SPDIF, 1:I2S) */
 166 #define CPLD_COAX_OUT           GPIO_D5_SPI_CCLK
 167 /* Input 1/2 Source Select (0:Analog12, 1:An34) */
 168 #define CPLD_IN12_SEL           GPIO_D6_CD
 169 /* Input 3/4 Source Select (0:Analog34, 1:Digital In) */
 170 #define CPLD_IN34_SEL           GPIO_D7_DD
 171
 172 /* internal clock (CPLD_SYNC_SEL = 0) options */
 173 #define CPLD_CKS_44100HZ        (0)
 174 #define CPLD_CKS_48000HZ        (CPLD_CKS0)
 175 #define CPLD_CKS_88200HZ        (CPLD_CKS1)
 176 #define CPLD_CKS_96000HZ        (CPLD_CKS1 | CPLD_CKS0)
 177 #define CPLD_CKS_176400HZ       (CPLD_CKS2)
 178 #define CPLD_CKS_192000HZ       (CPLD_CKS2 | CPLD_CKS0)
 179
 180 #define CPLD_CKS_MASK           (CPLD_CKS0 | CPLD_CKS1 | CPLD_CKS2)
 181
 182 /* external clock (CPLD_SYNC_SEL = 1) options */
 183 /* external clock - SPDIF */
 184 #define CPLD_EXT_SPDIF  (0 | CPLD_SYNC_SEL)
 185 /* external clock - WordClock 1xfs */
 186 #define CPLD_EXT_WORDCLOCK_1FS  (CPLD_CKS1 | CPLD_SYNC_SEL)
 187 /* external clock - WordClock 256xfs */
 188 #define CPLD_EXT_WORDCLOCK_256FS        (CPLD_CKS1 | CPLD_WORD_SEL |\
 189                 CPLD_SYNC_SEL)
 190
 191 #define EXT_SPDIF_TYPE                  0
 192 #define EXT_WORDCLOCK_1FS_TYPE          1
 193 #define EXT_WORDCLOCK_256FS_TYPE        2
 194
 195 #define AK4620_DFS0             (1<<0)
 196 #define AK4620_DFS1             (1<<1)
 197 #define AK4620_CKS0             (1<<2)
 198 #define AK4620_CKS1             (1<<3)
 199 /* Clock and Format Control register */
 200 #define AK4620_DFS_REG          0x02
 201
 202 /* Deem and Volume Control register */
 203 #define AK4620_DEEMVOL_REG      0x03
 204 #define AK4620_SMUTE            (1<<7)
 205
 206 /*
 207  * Conversion from int value to its binary form. Used for debugging.
 208  * The output buffer must be allocated prior to calling the function.
 209  */
 210 static char *get_binary(char *buffer, int value)
 211 {
 212         int i, j, pos;
 213         pos = 0;
 214         for (i = 0; i < 4; ++i) {
 215                 for (j = 0; j < 8; ++j) {
 216                         if (value & (1 << (31-(i*8 + j))))
 217                                 buffer[pos] = '1';
 218                         else
 219                                 buffer[pos] = '0';
 220                         pos++;
 221                 }
 222                 if (i < 3) {
 223                         buffer[pos] = ' ';
 224                         pos++;
 225                 }
 226         }
 227         buffer[pos] = '\0';
 228         return buffer;
 229 }
 230
 231 /*
 232  * Initial setup of the conversion array GPIO <-> rate
 233  */
 234 static unsigned int qtet_rates[] = {
 235         44100, 48000, 88200,
 236         96000, 176400, 192000,
 237 };
 238
 239 static unsigned int cks_vals[] = {
 240         CPLD_CKS_44100HZ, CPLD_CKS_48000HZ, CPLD_CKS_88200HZ,
 241         CPLD_CKS_96000HZ, CPLD_CKS_176400HZ, CPLD_CKS_192000HZ,
 242 };
 243
 244 static struct snd_pcm_hw_constraint_list qtet_rates_info = {
 245         .count = ARRAY_SIZE(qtet_rates),
 246         .list = qtet_rates,
 247         .mask = 0,
 248 };
 249
 250 static void qtet_ak4113_write(void *private_data, unsigned char reg,
 251                 unsigned char val)
 252 {
 253         snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4113_ADDR,
 254                         reg, val);
 255 }
 256
 257 static unsigned char qtet_ak4113_read(void *private_data, unsigned char reg)
 258 {
 259         return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data,
 260                         AK4113_ADDR, reg);
 261 }
 262
 263
 264 /*
 265  * AK4620 section
 266  */
 267
 268 /*
 269  * Write data to addr register of ak4620
 270  */
 271 static void qtet_akm_write(struct snd_akm4xxx *ak, int chip,
 272                 unsigned char addr, unsigned char data)
 273 {
 274         unsigned int tmp, orig_dir;
 275         int idx;
 276         unsigned int addrdata;
 277         struct snd_ice1712 *ice = ak->private_data[0];
 278
 279         if (snd_BUG_ON(chip < 0 || chip >= 4))
 280                 return;
 281         /*dev_dbg(ice->card->dev, "Writing to AK4620: chip=%d, addr=0x%x,
 282           data=0x%x\n", chip, addr, data);*/
 283         orig_dir = ice->gpio.get_dir(ice);
 284         ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL);
 285         /* set mask - only SPI bits */
 286         ice->gpio.set_mask(ice, ~GPIO_SPI_ALL);
 287
 288         tmp = ice->gpio.get_data(ice);
 289         /* high all */
 290         tmp |= GPIO_SPI_ALL;
 291         ice->gpio.set_data(ice, tmp);
 292         udelay(100);
 293         /* drop chip select */
 294         if (chip)
 295                 /* CODEC 1 */
 296                 tmp &= ~GPIO_SPI_CSN1;
 297         else
 298                 tmp &= ~GPIO_SPI_CSN0;
 299         ice->gpio.set_data(ice, tmp);
 300         udelay(100);
 301
 302         /* build I2C address + data byte */
 303         addrdata = (AK4620_ADDR << 6) | 0x20 | (addr & 0x1f);
 304         addrdata = (addrdata << 8) | data;
 305         for (idx = 15; idx >= 0; idx--) {
 306                 /* drop clock */
 307                 tmp &= ~GPIO_D5_SPI_CCLK;
 308                 ice->gpio.set_data(ice, tmp);
 309                 udelay(100);
 310                 /* set data */
 311                 if (addrdata & (1 << idx))
 312                         tmp |= GPIO_D4_SPI_CDTO;
 313                 else
 314                         tmp &= ~GPIO_D4_SPI_CDTO;
 315                 ice->gpio.set_data(ice, tmp);
 316                 udelay(100);
 317                 /* raise clock */
 318                 tmp |= GPIO_D5_SPI_CCLK;
 319                 ice->gpio.set_data(ice, tmp);
 320                 udelay(100);
 321         }
 322         /* all back to 1 */
 323         tmp |= GPIO_SPI_ALL;
 324         ice->gpio.set_data(ice, tmp);
 325         udelay(100);
 326
 327         /* return all gpios to non-writable */
 328         ice->gpio.set_mask(ice, 0xffffff);
 329         /* restore GPIOs direction */
 330         ice->gpio.set_dir(ice, orig_dir);
 331 }
 332
 333 static void qtet_akm_set_regs(struct snd_akm4xxx *ak, unsigned char addr,
 334                 unsigned char mask, unsigned char value)
 335 {
 336         unsigned char tmp;
 337         int chip;
 338         for (chip = 0; chip < ak->num_chips; chip++) {
 339                 tmp = snd_akm4xxx_get(ak, chip, addr);
 340                 /* clear the bits */
 341                 tmp &= ~mask;
 342                 /* set the new bits */
 343                 tmp |= value;
 344                 snd_akm4xxx_write(ak, chip, addr, tmp);
 345         }
 346 }
 347
 348 /*
 349  * change the rate of AK4620
 350  */
 351 static void qtet_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate)
 352 {
 353         unsigned char ak4620_dfs;
 354
 355         if (rate == 0)  /* no hint - S/PDIF input is master or the new spdif
 356                            input rate undetected, simply return */
 357                 return;
 358
 359         /* adjust DFS on codecs - see datasheet */
 360         if (rate > 108000)
 361                 ak4620_dfs = AK4620_DFS1 | AK4620_CKS1;
 362         else if (rate > 54000)
 363                 ak4620_dfs = AK4620_DFS0 | AK4620_CKS0;
 364         else
 365                 ak4620_dfs = 0;
 366
 367         /* set new value */
 368         qtet_akm_set_regs(ak, AK4620_DFS_REG, AK4620_DFS0 | AK4620_DFS1 |
 369                         AK4620_CKS0 | AK4620_CKS1, ak4620_dfs);
 370 }
 371
 372 #define AK_CONTROL(xname, xch)  { .name = xname, .num_channels = xch }
 373
 374 #define PCM_12_PLAYBACK_VOLUME  "PCM 1/2 Playback Volume"
 375 #define PCM_34_PLAYBACK_VOLUME  "PCM 3/4 Playback Volume"
 376 #define PCM_12_CAPTURE_VOLUME   "PCM 1/2 Capture Volume"
 377 #define PCM_34_CAPTURE_VOLUME   "PCM 3/4 Capture Volume"
 378
 379 static const struct snd_akm4xxx_dac_channel qtet_dac[] = {
 380         AK_CONTROL(PCM_12_PLAYBACK_VOLUME, 2),
 381         AK_CONTROL(PCM_34_PLAYBACK_VOLUME, 2),
 382 };
 383
 384 static const struct snd_akm4xxx_adc_channel qtet_adc[] = {
 385         AK_CONTROL(PCM_12_CAPTURE_VOLUME, 2),
 386         AK_CONTROL(PCM_34_CAPTURE_VOLUME, 2),
 387 };
 388
 389 static struct snd_akm4xxx akm_qtet_dac = {
 390         .type = SND_AK4620,
 391         .num_dacs = 4,  /* DAC1 - Output 12
 392         */
 393         .num_adcs = 4,  /* ADC1 - Input 12
 394         */
 395         .ops = {
 396                 .write = qtet_akm_write,
 397                 .set_rate_val = qtet_akm_set_rate_val,
 398         },
 399         .dac_info = qtet_dac,
 400         .adc_info = qtet_adc,
 401 };
 402
 403 /* Communication routines with the CPLD */
 404
 405
 406 /* Writes data to external register reg, both reg and data are
 407  * GPIO representations */
 408 static void reg_write(struct snd_ice1712 *ice, unsigned int reg,
 409                 unsigned int data)
 410 {
 411         unsigned int tmp;
 412
 413         mutex_lock(&ice->gpio_mutex);
 414         /* set direction of used GPIOs*/
 415         /* all outputs */
 416         tmp = 0x00ffff;
 417         ice->gpio.set_dir(ice, tmp);
 418         /* mask - writable bits */
 419         ice->gpio.set_mask(ice, ~(tmp));
 420         /* write the data */
 421         tmp = ice->gpio.get_data(ice);
 422         tmp &= ~GPIO_DATA_MASK;
 423         tmp |= data;
 424         ice->gpio.set_data(ice, tmp);
 425         udelay(100);
 426         /* drop output enable */
 427         tmp &=  ~GPIO_EX_GPIOE;
 428         ice->gpio.set_data(ice, tmp);
 429         udelay(100);
 430         /* drop the register gpio */
 431         tmp &= ~reg;
 432         ice->gpio.set_data(ice, tmp);
 433         udelay(100);
 434         /* raise the register GPIO */
 435         tmp |= reg;
 436         ice->gpio.set_data(ice, tmp);
 437         udelay(100);
 438
 439         /* raise all data gpios */
 440         tmp |= GPIO_DATA_MASK;
 441         ice->gpio.set_data(ice, tmp);
 442         /* mask - immutable bits */
 443         ice->gpio.set_mask(ice, 0xffffff);
 444         /* outputs only 8-15 */
 445         ice->gpio.set_dir(ice, 0x00ff00);
 446         mutex_unlock(&ice->gpio_mutex);
 447 }
 448
 449 static unsigned int get_scr(struct snd_ice1712 *ice)
 450 {
 451         struct qtet_spec *spec = ice->spec;
 452         return spec->scr;
 453 }
 454
 455 static unsigned int get_mcr(struct snd_ice1712 *ice)
 456 {
 457         struct qtet_spec *spec = ice->spec;
 458         return spec->mcr;
 459 }
 460
 461 static unsigned int get_cpld(struct snd_ice1712 *ice)
 462 {
 463         struct qtet_spec *spec = ice->spec;
 464         return spec->cpld;
 465 }
 466
 467 static void set_scr(struct snd_ice1712 *ice, unsigned int val)
 468 {
 469         struct qtet_spec *spec = ice->spec;
 470         reg_write(ice, GPIO_SCR, val);
 471         spec->scr = val;
 472 }
 473
 474 static void set_mcr(struct snd_ice1712 *ice, unsigned int val)
 475 {
 476         struct qtet_spec *spec = ice->spec;
 477         reg_write(ice, GPIO_MCR, val);
 478         spec->mcr = val;
 479 }
 480
 481 static void set_cpld(struct snd_ice1712 *ice, unsigned int val)
 482 {
 483         struct qtet_spec *spec = ice->spec;
 484         reg_write(ice, GPIO_CPLD_CSN, val);
 485         spec->cpld = val;
 486 }
 487
 488 static void proc_regs_read(struct snd_info_entry *entry,
 489                 struct snd_info_buffer *buffer)
 490 {
 491         struct snd_ice1712 *ice = entry->private_data;
 492         char bin_buffer[36];
 493
 494         snd_iprintf(buffer, "SCR:       %s\n", get_binary(bin_buffer,
 495                                 get_scr(ice)));
 496         snd_iprintf(buffer, "MCR:       %s\n", get_binary(bin_buffer,
 497                                 get_mcr(ice)));
 498         snd_iprintf(buffer, "CPLD:      %s\n", get_binary(bin_buffer,
 499                                 get_cpld(ice)));
 500 }
 501
 502 static void proc_init(struct snd_ice1712 *ice)
 503 {
 504         struct snd_info_entry *entry;
 505         if (!snd_card_proc_new(ice->card, "quartet", &entry))
 506                 snd_info_set_text_ops(entry, ice, proc_regs_read);
 507 }
 508
 509 static int qtet_mute_get(struct snd_kcontrol *kcontrol,
 510                 struct snd_ctl_elem_value *ucontrol)
 511 {
 512         struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 513         unsigned int val;
 514         val = get_scr(ice) & SCR_MUTE;
 515         ucontrol->value.integer.value[0] = (val) ? 0 : 1;
 516         return 0;
 517 }
 518
 519 static int qtet_mute_put(struct snd_kcontrol *kcontrol,
 520                 struct snd_ctl_elem_value *ucontrol)
 521 {
 522         struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 523         unsigned int old, new, smute;
 524         old = get_scr(ice) & SCR_MUTE;
 525         if (ucontrol->value.integer.value[0]) {
 526                 /* unmute */
 527                 new = 0;
 528                 /* un-smuting DAC */
 529                 smute = 0;
 530         } else {
 531                 /* mute */
 532                 new = SCR_MUTE;
 533                 /* smuting DAC */
 534                 smute = AK4620_SMUTE;
 535         }
 536         if (old != new) {
 537                 struct snd_akm4xxx *ak = ice->akm;
 538                 set_scr(ice, (get_scr(ice) & ~SCR_MUTE) | new);
 539                 /* set smute */
 540                 qtet_akm_set_regs(ak, AK4620_DEEMVOL_REG, AK4620_SMUTE, smute);
 541                 return 1;
 542         }
 543         /* no change */
 544         return 0;
 545 }
 546
 547 static int qtet_ain12_enum_info(struct snd_kcontrol *kcontrol,
 548                 struct snd_ctl_elem_info *uinfo)
 549 {
 550         static const char * const texts[3] =
 551                 {"Line In 1/2", "Mic", "Mic + Low-cut"};
 552         return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
 553 }
 554
 555 static int qtet_ain12_sw_get(struct snd_kcontrol *kcontrol,
 556                 struct snd_ctl_elem_value *ucontrol)
 557 {
 558         struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 559         unsigned int val, result;
 560         val = get_scr(ice) & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
 561         switch (val) {
 562         case SCR_AIN12_LINE:
 563                 result = 0;
 564                 break;
 565         case SCR_AIN12_MIC:
 566                 result = 1;
 567                 break;
 568         case SCR_AIN12_LOWCUT:
 569                 result = 2;
 570                 break;
 571         default:
 572                 /* BUG - no other combinations allowed */
 573                 snd_BUG();
 574                 result = 0;
 575         }
 576         ucontrol->value.integer.value[0] = result;
 577         return 0;
 578 }
 579
 580 static int qtet_ain12_sw_put(struct snd_kcontrol *kcontrol,
 581                 struct snd_ctl_elem_value *ucontrol)
 582 {
 583         struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 584         unsigned int old, new, tmp, masked_old;
 585         old = new = get_scr(ice);
 586         masked_old = old & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
 587         tmp = ucontrol->value.integer.value[0];
 588         if (tmp == 2)
 589                 tmp = 3;        /* binary 10 is not supported */
 590         tmp <<= 4;      /* shifting to SCR_AIN12_SEL0 */
 591         if (tmp != masked_old) {
 592                 /* change requested */
 593                 switch (tmp) {
 594                 case SCR_AIN12_LINE:
 595                         new = old & ~(SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
 596                         set_scr(ice, new);
 597                         /* turn off relay */
 598                         new &= ~SCR_RELAY;
 599                         set_scr(ice, new);
 600                         break;
 601                 case SCR_AIN12_MIC:
 602                         /* turn on relay */
 603                         new = old | SCR_RELAY;
 604                         set_scr(ice, new);
 605                         new = (new & ~SCR_AIN12_SEL1) | SCR_AIN12_SEL0;
 606                         set_scr(ice, new);
 607                         break;
 608                 case SCR_AIN12_LOWCUT:
 609                         /* turn on relay */
 610                         new = old | SCR_RELAY;
 611                         set_scr(ice, new);
 612                         new |= SCR_AIN12_SEL1 | SCR_AIN12_SEL0;
 613                         set_scr(ice, new);
 614                         break;
 615                 default:
 616                         snd_BUG();
 617                 }
 618                 return 1;
 619         }
 620         /* no change */
 621         return 0;
 622 }
 623
 624 static int qtet_php_get(struct snd_kcontrol *kcontrol,
 625                 struct snd_ctl_elem_value *ucontrol)
 626 {
 627         struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 628         unsigned int val;
 629         /* if phantom voltage =48V, phantom on */
 630         val = get_scr(ice) & SCR_PHP_V;
 631         ucontrol->value.integer.value[0] = val ? 1 : 0;
 632         return 0;
 633 }
 634
 635 static int qtet_php_put(struct snd_kcontrol *kcontrol,
 636                 struct snd_ctl_elem_value *ucontrol)
 637 {
 638         struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 639         unsigned int old, new;
 640         old = new = get_scr(ice);
 641         if (ucontrol->value.integer.value[0] /* phantom on requested */
 642                         && (~old & SCR_PHP_V)) /* 0 = voltage 5V */ {
 643                 /* is off, turn on */
 644                 /* turn voltage on first, = 1 */
 645                 new = old | SCR_PHP_V;
 646                 set_scr(ice, new);
 647                 /* turn phantom on, = 0 */
 648                 new &= ~SCR_PHP;
 649                 set_scr(ice, new);
 650         } else if (!ucontrol->value.integer.value[0] && (old & SCR_PHP_V)) {
 651                 /* phantom off requested and 1 = voltage 48V */
 652                 /* is on, turn off */
 653                 /* turn voltage off first, = 0 */
 654                 new = old & ~SCR_PHP_V;
 655                 set_scr(ice, new);
 656                 /* turn phantom off, = 1 */
 657                 new |= SCR_PHP;
 658                 set_scr(ice, new);
 659         }
 660         if (old != new)
 661                 return 1;
 662         /* no change */
 663         return 0;
 664 }
 665
 666 #define PRIV_SW(xid, xbit, xreg)        [xid] = {.bit = xbit,\
 667         .set_register = set_##xreg,\
 668         .get_register = get_##xreg, }
 669
 670
 671 #define PRIV_ENUM2(xid, xbit, xreg, xtext1, xtext2)     [xid] = {.bit = xbit,\
 672         .set_register = set_##xreg,\
 673         .get_register = get_##xreg,\
 674         .texts = {xtext1, xtext2} }
 675
 676 static struct qtet_kcontrol_private qtet_privates[] = {
 677         PRIV_ENUM2(IN12_SEL, CPLD_IN12_SEL, cpld, "An In 1/2", "An In 3/4"),
 678         PRIV_ENUM2(IN34_SEL, CPLD_IN34_SEL, cpld, "An In 3/4", "IEC958 In"),
 679         PRIV_ENUM2(AIN34_SEL, SCR_AIN34_SEL, scr, "Line In 3/4", "Hi-Z"),
 680         PRIV_ENUM2(COAX_OUT, CPLD_COAX_OUT, cpld, "IEC958", "I2S"),
 681         PRIV_SW(IN12_MON12, MCR_IN12_MON12, mcr),
 682         PRIV_SW(IN12_MON34, MCR_IN12_MON34, mcr),
 683         PRIV_SW(IN34_MON12, MCR_IN34_MON12, mcr),
 684         PRIV_SW(IN34_MON34, MCR_IN34_MON34, mcr),
 685         PRIV_SW(OUT12_MON34, MCR_OUT12_MON34, mcr),
 686         PRIV_SW(OUT34_MON12, MCR_OUT34_MON12, mcr),
 687 };
 688
 689 static int qtet_enum_info(struct snd_kcontrol *kcontrol,
 690                 struct snd_ctl_elem_info *uinfo)
 691 {
 692         struct qtet_kcontrol_private private =
 693                 qtet_privates[kcontrol->private_value];
 694         return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(private.texts),
 695                                  private.texts);
 696 }
 697
 698 static int qtet_sw_get(struct snd_kcontrol *kcontrol,
 699                 struct snd_ctl_elem_value *ucontrol)
 700 {
 701         struct qtet_kcontrol_private private =
 702                 qtet_privates[kcontrol->private_value];
 703         struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 704         ucontrol->value.integer.value[0] =
 705                 (private.get_register(ice) & private.bit) ? 1 : 0;
 706         return 0;
 707 }
 708
 709 static int qtet_sw_put(struct snd_kcontrol *kcontrol,
 710                 struct snd_ctl_elem_value *ucontrol)
 711 {
 712         struct qtet_kcontrol_private private =
 713                 qtet_privates[kcontrol->private_value];
 714         struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 715         unsigned int old, new;
 716         old = private.get_register(ice);
 717         if (ucontrol->value.integer.value[0])
 718                 new = old | private.bit;
 719         else
 720                 new = old & ~private.bit;
 721         if (old != new) {
 722                 private.set_register(ice, new);
 723                 return 1;
 724         }
 725         /* no change */
 726         return 0;
 727 }
 728
 729 #define qtet_sw_info    snd_ctl_boolean_mono_info
 730
 731 #define QTET_CONTROL(xname, xtype, xpriv)       \
 732         {.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\
 733         .name = xname,\
 734         .info = qtet_##xtype##_info,\
 735         .get = qtet_sw_get,\
 736         .put = qtet_sw_put,\
 737         .private_value = xpriv }
 738
 739 static struct snd_kcontrol_new qtet_controls[] = {
 740         {
 741                 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 742                 .name = "Master Playback Switch",
 743                 .info = qtet_sw_info,
 744                 .get = qtet_mute_get,
 745                 .put = qtet_mute_put,
 746                 .private_value = 0
 747         },
 748         {
 749                 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 750                 .name = "Phantom Power",
 751                 .info = qtet_sw_info,
 752                 .get = qtet_php_get,
 753                 .put = qtet_php_put,
 754                 .private_value = 0
 755         },
 756         {
 757                 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 758                 .name = "Analog In 1/2 Capture Switch",
 759                 .info = qtet_ain12_enum_info,
 760                 .get = qtet_ain12_sw_get,
 761                 .put = qtet_ain12_sw_put,
 762                 .private_value = 0
 763         },
 764         QTET_CONTROL("Analog In 3/4 Capture Switch", enum, AIN34_SEL),
 765         QTET_CONTROL("PCM In 1/2 Capture Switch", enum, IN12_SEL),
 766         QTET_CONTROL("PCM In 3/4 Capture Switch", enum, IN34_SEL),
 767         QTET_CONTROL("Coax Output Source", enum, COAX_OUT),
 768         QTET_CONTROL("Analog In 1/2 to Monitor 1/2", sw, IN12_MON12),
 769         QTET_CONTROL("Analog In 1/2 to Monitor 3/4", sw, IN12_MON34),
 770         QTET_CONTROL("Analog In 3/4 to Monitor 1/2", sw, IN34_MON12),
 771         QTET_CONTROL("Analog In 3/4 to Monitor 3/4", sw, IN34_MON34),
 772         QTET_CONTROL("Output 1/2 to Monitor 3/4", sw, OUT12_MON34),
 773         QTET_CONTROL("Output 3/4 to Monitor 1/2", sw, OUT34_MON12),
 774 };
 775
 776 static char *slave_vols[] = {
 777         PCM_12_PLAYBACK_VOLUME,
 778         PCM_34_PLAYBACK_VOLUME,
 779         NULL
 780 };
 781
 782 static
 783 DECLARE_TLV_DB_SCALE(qtet_master_db_scale, -6350, 50, 1);
 784
 785 static struct snd_kcontrol *ctl_find(struct snd_card *card,
 786                                      const char *name)
 787 {
 788         struct snd_ctl_elem_id sid;
 789         memset(&sid, 0, sizeof(sid));
 790         /* FIXME: strcpy is bad. */
 791         strcpy(sid.name, name);
 792         sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
 793         return snd_ctl_find_id(card, &sid);
 794 }
 795
 796 static void add_slaves(struct snd_card *card,
 797                        struct snd_kcontrol *master, char * const *list)
 798 {
 799         for (; *list; list++) {
 800                 struct snd_kcontrol *slave = ctl_find(card, *list);
 801                 if (slave)
 802                         snd_ctl_add_slave(master, slave);
 803         }
 804 }
 805
 806 static int qtet_add_controls(struct snd_ice1712 *ice)
 807 {
 808         struct qtet_spec *spec = ice->spec;
 809         int err, i;
 810         struct snd_kcontrol *vmaster;
 811         err = snd_ice1712_akm4xxx_build_controls(ice);
 812         if (err < 0)
 813                 return err;
 814         for (i = 0; i < ARRAY_SIZE(qtet_controls); i++) {
 815                 err = snd_ctl_add(ice->card,
 816                                 snd_ctl_new1(&qtet_controls[i], ice));
 817                 if (err < 0)
 818                         return err;
 819         }
 820
 821         /* Create virtual master control */
 822         vmaster = snd_ctl_make_virtual_master("Master Playback Volume",
 823                         qtet_master_db_scale);
 824         if (!vmaster)
 825                 return -ENOMEM;
 826         add_slaves(ice->card, vmaster, slave_vols);
 827         err = snd_ctl_add(ice->card, vmaster);
 828         if (err < 0)
 829                 return err;
 830         /* only capture SPDIF over AK4113 */
 831         return snd_ak4113_build(spec->ak4113,
 832                         ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
 833 }
 834
 835 static inline int qtet_is_spdif_master(struct snd_ice1712 *ice)
 836 {
 837         /* CPLD_SYNC_SEL: 0 = internal, 1 = external (i.e. spdif master) */
 838         return (get_cpld(ice) & CPLD_SYNC_SEL) ? 1 : 0;
 839 }
 840
 841 static unsigned int qtet_get_rate(struct snd_ice1712 *ice)
 842 {
 843         int i;
 844         unsigned char result;
 845
 846         result =  get_cpld(ice) & CPLD_CKS_MASK;
 847         for (i = 0; i < ARRAY_SIZE(cks_vals); i++)
 848                 if (cks_vals[i] == result)
 849                         return qtet_rates[i];
 850         return 0;
 851 }
 852
 853 static int get_cks_val(int rate)
 854 {
 855         int i;
 856         for (i = 0; i < ARRAY_SIZE(qtet_rates); i++)
 857                 if (qtet_rates[i] == rate)
 858                         return cks_vals[i];
 859         return 0;
 860 }
 861
 862 /* setting new rate */
 863 static void qtet_set_rate(struct snd_ice1712 *ice, unsigned int rate)
 864 {
 865         unsigned int new;
 866         unsigned char val;
 867         /* switching ice1724 to external clock - supplied by ext. circuits */
 868         val = inb(ICEMT1724(ice, RATE));
 869         outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
 870
 871         new =  (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate);
 872         /* switch to internal clock, drop CPLD_SYNC_SEL */
 873         new &= ~CPLD_SYNC_SEL;
 874         /* dev_dbg(ice->card->dev, "QT - set_rate: old %x, new %x\n",
 875            get_cpld(ice), new); */
 876         set_cpld(ice, new);
 877 }
 878
 879 static inline unsigned char qtet_set_mclk(struct snd_ice1712 *ice,
 880                 unsigned int rate)
 881 {
 882         /* no change in master clock */
 883         return 0;
 884 }
 885
 886 /* setting clock to external - SPDIF */
 887 static int qtet_set_spdif_clock(struct snd_ice1712 *ice, int type)
 888 {
 889         unsigned int old, new;
 890
 891         old = new = get_cpld(ice);
 892         new &= ~(CPLD_CKS_MASK | CPLD_WORD_SEL);
 893         switch (type) {
 894         case EXT_SPDIF_TYPE:
 895                 new |= CPLD_EXT_SPDIF;
 896                 break;
 897         case EXT_WORDCLOCK_1FS_TYPE:
 898                 new |= CPLD_EXT_WORDCLOCK_1FS;
 899                 break;
 900         case EXT_WORDCLOCK_256FS_TYPE:
 901                 new |= CPLD_EXT_WORDCLOCK_256FS;
 902                 break;
 903         default:
 904                 snd_BUG();
 905         }
 906         if (old != new) {
 907                 set_cpld(ice, new);
 908                 /* changed */
 909                 return 1;
 910         }
 911         return 0;
 912 }
 913
 914 static int qtet_get_spdif_master_type(struct snd_ice1712 *ice)
 915 {
 916         unsigned int val;
 917         int result;
 918         val = get_cpld(ice);
 919         /* checking only rate/clock-related bits */
 920         val &= (CPLD_CKS_MASK | CPLD_WORD_SEL | CPLD_SYNC_SEL);
 921         if (!(val & CPLD_SYNC_SEL)) {
 922                 /* switched to internal clock, is not any external type */
 923                 result = -1;
 924         } else {
 925                 switch (val) {
 926                 case (CPLD_EXT_SPDIF):
 927                         result = EXT_SPDIF_TYPE;
 928                         break;
 929                 case (CPLD_EXT_WORDCLOCK_1FS):
 930                         result = EXT_WORDCLOCK_1FS_TYPE;
 931                         break;
 932                 case (CPLD_EXT_WORDCLOCK_256FS):
 933                         result = EXT_WORDCLOCK_256FS_TYPE;
 934                         break;
 935                 default:
 936                         /* undefined combination of external clock setup */
 937                         snd_BUG();
 938                         result = 0;
 939                 }
 940         }
 941         return result;
 942 }
 943
 944 /* Called when ak4113 detects change in the input SPDIF stream */
 945 static void qtet_ak4113_change(struct ak4113 *ak4113, unsigned char c0,
 946                 unsigned char c1)
 947 {
 948         struct snd_ice1712 *ice = ak4113->change_callback_private;
 949         int rate;
 950         if ((qtet_get_spdif_master_type(ice) == EXT_SPDIF_TYPE) &&
 951                         c1) {
 952                 /* only for SPDIF master mode, rate was changed */
 953                 rate = snd_ak4113_external_rate(ak4113);
 954                 /* dev_dbg(ice->card->dev, "ak4113 - input rate changed to %d\n",
 955                    rate); */
 956                 qtet_akm_set_rate_val(ice->akm, rate);
 957         }
 958 }
 959
 960 /*
 961  * If clock slaved to SPDIF-IN, setting runtime rate
 962  * to the detected external rate
 963  */
 964 static void qtet_spdif_in_open(struct snd_ice1712 *ice,
 965                 struct snd_pcm_substream *substream)
 966 {
 967         struct qtet_spec *spec = ice->spec;
 968         struct snd_pcm_runtime *runtime = substream->runtime;
 969         int rate;
 970
 971         if (qtet_get_spdif_master_type(ice) != EXT_SPDIF_TYPE)
 972                 /* not external SPDIF, no rate limitation */
 973                 return;
 974         /* only external SPDIF can detect incoming sample rate */
 975         rate = snd_ak4113_external_rate(spec->ak4113);
 976         if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) {
 977                 runtime->hw.rate_min = rate;
 978                 runtime->hw.rate_max = rate;
 979         }
 980 }
 981
 982 /*
 983  * initialize the chip
 984  */
 985 static int qtet_init(struct snd_ice1712 *ice)
 986 {
 987         static const unsigned char ak4113_init_vals[] = {
 988                 /* AK4113_REG_PWRDN */  AK4113_RST | AK4113_PWN |
 989                         AK4113_OCKS0 | AK4113_OCKS1,
 990                 /* AK4113_REQ_FORMAT */ AK4113_DIF_I24I2S | AK4113_VTX |
 991                         AK4113_DEM_OFF | AK4113_DEAU,
 992                 /* AK4113_REG_IO0 */    AK4113_OPS2 | AK4113_TXE |
 993                         AK4113_XTL_24_576M,
 994                 /* AK4113_REG_IO1 */    AK4113_EFH_1024LRCLK | AK4113_IPS(0),
 995                 /* AK4113_REG_INT0_MASK */      0,
 996                 /* AK4113_REG_INT1_MASK */      0,
 997                 /* AK4113_REG_DATDTS */         0,
 998         };
 999         int err;
1000         struct qtet_spec *spec;
1001         struct snd_akm4xxx *ak;
1002         unsigned char val;
1003
1004         /* switching ice1724 to external clock - supplied by ext. circuits */
1005         val = inb(ICEMT1724(ice, RATE));
1006         outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
1007
1008         spec = kzalloc(sizeof(*spec), GFP_KERNEL);
1009         if (!spec)
1010                 return -ENOMEM;
1011         /* qtet is clocked by Xilinx array */
1012         ice->hw_rates = &qtet_rates_info;
1013         ice->is_spdif_master = qtet_is_spdif_master;
1014         ice->get_rate = qtet_get_rate;
1015         ice->set_rate = qtet_set_rate;
1016         ice->set_mclk = qtet_set_mclk;
1017         ice->set_spdif_clock = qtet_set_spdif_clock;
1018         ice->get_spdif_master_type = qtet_get_spdif_master_type;
1019         ice->ext_clock_names = ext_clock_names;
1020         ice->ext_clock_count = ARRAY_SIZE(ext_clock_names);
1021         /* since Qtet can detect correct SPDIF-in rate, all streams can be
1022          * limited to this specific rate */
1023         ice->spdif.ops.open = ice->pro_open = qtet_spdif_in_open;
1024         ice->spec = spec;
1025
1026         /* Mute Off */
1027         /* SCR Initialize*/
1028         /* keep codec power down first */
1029         set_scr(ice, SCR_PHP);
1030         udelay(1);
1031         /* codec power up */
1032         set_scr(ice, SCR_PHP | SCR_CODEC_PDN);
1033
1034         /* MCR Initialize */
1035         set_mcr(ice, 0);
1036
1037         /* CPLD Initialize */
1038         set_cpld(ice, 0);
1039
1040
1041         ice->num_total_dacs = 2;
1042         ice->num_total_adcs = 2;
1043
1044         ice->akm = kcalloc(2, sizeof(struct snd_akm4xxx), GFP_KERNEL);
1045         ak = ice->akm;
1046         if (!ak)
1047                 return -ENOMEM;
1048         /* only one codec with two chips */
1049         ice->akm_codecs = 1;
1050         err = snd_ice1712_akm4xxx_init(ak, &akm_qtet_dac, NULL, ice);
1051         if (err < 0)
1052                 return err;
1053         err = snd_ak4113_create(ice->card,
1054                         qtet_ak4113_read,
1055                         qtet_ak4113_write,
1056                         ak4113_init_vals,
1057                         ice, &spec->ak4113);
1058         if (err < 0)
1059                 return err;
1060         /* callback for codecs rate setting */
1061         spec->ak4113->change_callback = qtet_ak4113_change;
1062         spec->ak4113->change_callback_private = ice;
1063         /* AK41143 in Quartet can detect external rate correctly
1064          * (i.e. check_flags = 0) */
1065         spec->ak4113->check_flags = 0;
1066
1067         proc_init(ice);
1068
1069         qtet_set_rate(ice, 44100);
1070         return 0;
1071 }
1072
1073 static unsigned char qtet_eeprom[] = {
1074         [ICE_EEP2_SYSCONF]     = 0x28,  /* clock 256(24MHz), mpu401, 1xADC,
1075                                            1xDACs, SPDIF in */
1076         [ICE_EEP2_ACLINK]      = 0x80,  /* I2S */
1077         [ICE_EEP2_I2S]         = 0x78,  /* 96k, 24bit, 192k */
1078         [ICE_EEP2_SPDIF]       = 0xc3,  /* out-en, out-int, in, out-ext */
1079         [ICE_EEP2_GPIO_DIR]    = 0x00,  /* 0-7 inputs, switched to output
1080                                            only during output operations */
1081         [ICE_EEP2_GPIO_DIR1]   = 0xff,  /* 8-15 outputs */
1082         [ICE_EEP2_GPIO_DIR2]   = 0x00,
1083         [ICE_EEP2_GPIO_MASK]   = 0xff,  /* changed only for OUT operations */
1084         [ICE_EEP2_GPIO_MASK1]  = 0x00,
1085         [ICE_EEP2_GPIO_MASK2]  = 0xff,
1086
1087         [ICE_EEP2_GPIO_STATE]  = 0x00, /* inputs */
1088         [ICE_EEP2_GPIO_STATE1] = 0x7d, /* all 1, but GPIO_CPLD_RW
1089                                           and GPIO15 always zero */
1090         [ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */
1091 };
1092
1093 /* entry point */
1094 struct snd_ice1712_card_info snd_vt1724_qtet_cards[] = {
1095         {
1096                 .subvendor = VT1724_SUBDEVICE_QTET,
1097                 .name = "Infrasonic Quartet",
1098                 .model = "quartet",
1099                 .chip_init = qtet_init,
1100                 .build_controls = qtet_add_controls,
1101                 .eeprom_size = sizeof(qtet_eeprom),
1102                 .eeprom_data = qtet_eeprom,
1103         },
1104         { } /* terminator */
1105 };