sound/soc/atmel/atmel_ssc_dai.c

   1 /*
   2  * atmel_ssc_dai.c  --  ALSA SoC ATMEL SSC Audio Layer Platform driver
   3  *
   4  * Copyright (C) 2005 SAN People
   5  * Copyright (C) 2008 Atmel
   6  *
   7  * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
   8  *         ATMEL CORP.
   9  *
  10  * Based on at91-ssc.c by
  11  * Frank Mandarino <fmandarino@endrelia.com>
  12  * Based on pxa2xx Platform drivers by
  13  * Liam Girdwood <lrg@slimlogic.co.uk>
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, write to the Free Software
  27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  28  */
  29
  30 #include <linux/init.h>
  31 #include <linux/module.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/device.h>
  34 #include <linux/delay.h>
  35 #include <linux/clk.h>
  36 #include <linux/atmel_pdc.h>
  37
  38 #include <linux/atmel-ssc.h>
  39 #include <sound/core.h>
  40 #include <sound/pcm.h>
  41 #include <sound/pcm_params.h>
  42 #include <sound/initval.h>
  43 #include <sound/soc.h>
  44
  45 #include "atmel-pcm.h"
  46 #include "atmel_ssc_dai.h"
  47
  48
  49 #define NUM_SSC_DEVICES         3
  50
  51 /*
  52  * SSC PDC registers required by the PCM DMA engine.
  53  */
  54 static struct atmel_pdc_regs pdc_tx_reg = {
  55         .xpr            = ATMEL_PDC_TPR,
  56         .xcr            = ATMEL_PDC_TCR,
  57         .xnpr           = ATMEL_PDC_TNPR,
  58         .xncr           = ATMEL_PDC_TNCR,
  59 };
  60
  61 static struct atmel_pdc_regs pdc_rx_reg = {
  62         .xpr            = ATMEL_PDC_RPR,
  63         .xcr            = ATMEL_PDC_RCR,
  64         .xnpr           = ATMEL_PDC_RNPR,
  65         .xncr           = ATMEL_PDC_RNCR,
  66 };
  67
  68 /*
  69  * SSC & PDC status bits for transmit and receive.
  70  */
  71 static struct atmel_ssc_mask ssc_tx_mask = {
  72         .ssc_enable     = SSC_BIT(CR_TXEN),
  73         .ssc_disable    = SSC_BIT(CR_TXDIS),
  74         .ssc_endx       = SSC_BIT(SR_ENDTX),
  75         .ssc_endbuf     = SSC_BIT(SR_TXBUFE),
  76         .ssc_error      = SSC_BIT(SR_OVRUN),
  77         .pdc_enable     = ATMEL_PDC_TXTEN,
  78         .pdc_disable    = ATMEL_PDC_TXTDIS,
  79 };
  80
  81 static struct atmel_ssc_mask ssc_rx_mask = {
  82         .ssc_enable     = SSC_BIT(CR_RXEN),
  83         .ssc_disable    = SSC_BIT(CR_RXDIS),
  84         .ssc_endx       = SSC_BIT(SR_ENDRX),
  85         .ssc_endbuf     = SSC_BIT(SR_RXBUFF),
  86         .ssc_error      = SSC_BIT(SR_OVRUN),
  87         .pdc_enable     = ATMEL_PDC_RXTEN,
  88         .pdc_disable    = ATMEL_PDC_RXTDIS,
  89 };
  90
  91
  92 /*
  93  * DMA parameters.
  94  */
  95 static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
  96         {{
  97         .name           = "SSC0 PCM out",
  98         .pdc            = &pdc_tx_reg,
  99         .mask           = &ssc_tx_mask,
 100         },
 101         {
 102         .name           = "SSC0 PCM in",
 103         .pdc            = &pdc_rx_reg,
 104         .mask           = &ssc_rx_mask,
 105         } },
 106         {{
 107         .name           = "SSC1 PCM out",
 108         .pdc            = &pdc_tx_reg,
 109         .mask           = &ssc_tx_mask,
 110         },
 111         {
 112         .name           = "SSC1 PCM in",
 113         .pdc            = &pdc_rx_reg,
 114         .mask           = &ssc_rx_mask,
 115         } },
 116         {{
 117         .name           = "SSC2 PCM out",
 118         .pdc            = &pdc_tx_reg,
 119         .mask           = &ssc_tx_mask,
 120         },
 121         {
 122         .name           = "SSC2 PCM in",
 123         .pdc            = &pdc_rx_reg,
 124         .mask           = &ssc_rx_mask,
 125         } },
 126 };
 127
 128
 129 static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = {
 130         {
 131         .name           = "ssc0",
 132         .lock           = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
 133         .dir_mask       = SSC_DIR_MASK_UNUSED,
 134         .initialized    = 0,
 135         },
 136         {
 137         .name           = "ssc1",
 138         .lock           = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
 139         .dir_mask       = SSC_DIR_MASK_UNUSED,
 140         .initialized    = 0,
 141         },
 142         {
 143         .name           = "ssc2",
 144         .lock           = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
 145         .dir_mask       = SSC_DIR_MASK_UNUSED,
 146         .initialized    = 0,
 147         },
 148 };
 149
 150
 151 /*
 152  * SSC interrupt handler.  Passes PDC interrupts to the DMA
 153  * interrupt handler in the PCM driver.
 154  */
 155 static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
 156 {
 157         struct atmel_ssc_info *ssc_p = dev_id;
 158         struct atmel_pcm_dma_params *dma_params;
 159         u32 ssc_sr;
 160         u32 ssc_substream_mask;
 161         int i;
 162
 163         ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
 164                         & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
 165
 166         /*
 167          * Loop through the substreams attached to this SSC.  If
 168          * a DMA-related interrupt occurred on that substream, call
 169          * the DMA interrupt handler function, if one has been
 170          * registered in the dma_params structure by the PCM driver.
 171          */
 172         for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
 173                 dma_params = ssc_p->dma_params[i];
 174
 175                 if ((dma_params != NULL) &&
 176                         (dma_params->dma_intr_handler != NULL)) {
 177                         ssc_substream_mask = (dma_params->mask->ssc_endx |
 178                                         dma_params->mask->ssc_endbuf);
 179                         if (ssc_sr & ssc_substream_mask) {
 180                                 dma_params->dma_intr_handler(ssc_sr,
 181                                                 dma_params->
 182                                                 substream);
 183                         }
 184                 }
 185         }
 186
 187         return IRQ_HANDLED;
 188 }
 189
 190
 191 /*-------------------------------------------------------------------------*\
 192  * DAI functions
 193 \*-------------------------------------------------------------------------*/
 194 /*
 195  * Startup.  Only that one substream allowed in each direction.
 196  */
 197 static int atmel_ssc_startup(struct snd_pcm_substream *substream,
 198                              struct snd_soc_dai *dai)
 199 {
 200         struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
 201         struct atmel_pcm_dma_params *dma_params;
 202         int dir, dir_mask;
 203
 204         pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
 205                 ssc_readl(ssc_p->ssc->regs, SR));
 206
 207         if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 208                 dir = 0;
 209                 dir_mask = SSC_DIR_MASK_PLAYBACK;
 210         } else {
 211                 dir = 1;
 212                 dir_mask = SSC_DIR_MASK_CAPTURE;
 213         }
 214
 215         dma_params = &ssc_dma_params[dai->id][dir];
 216         dma_params->ssc = ssc_p->ssc;
 217         dma_params->substream = substream;
 218
 219         ssc_p->dma_params[dir] = dma_params;
 220
 221         snd_soc_dai_set_dma_data(dai, substream, dma_params);
 222
 223         spin_lock_irq(&ssc_p->lock);
 224         if (ssc_p->dir_mask & dir_mask) {
 225                 spin_unlock_irq(&ssc_p->lock);
 226                 return -EBUSY;
 227         }
 228         ssc_p->dir_mask |= dir_mask;
 229         spin_unlock_irq(&ssc_p->lock);
 230
 231         return 0;
 232 }
 233
 234 /*
 235  * Shutdown.  Clear DMA parameters and shutdown the SSC if there
 236  * are no other substreams open.
 237  */
 238 static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
 239                                struct snd_soc_dai *dai)
 240 {
 241         struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
 242         struct atmel_pcm_dma_params *dma_params;
 243         int dir, dir_mask;
 244
 245         if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 246                 dir = 0;
 247         else
 248                 dir = 1;
 249
 250         dma_params = ssc_p->dma_params[dir];
 251
 252         if (dma_params != NULL) {
 253                 ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
 254                 pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n",
 255                         (dir ? "receive" : "transmit"),
 256                         ssc_readl(ssc_p->ssc->regs, SR));
 257
 258                 dma_params->ssc = NULL;
 259                 dma_params->substream = NULL;
 260                 ssc_p->dma_params[dir] = NULL;
 261         }
 262
 263         dir_mask = 1 << dir;
 264
 265         spin_lock_irq(&ssc_p->lock);
 266         ssc_p->dir_mask &= ~dir_mask;
 267         if (!ssc_p->dir_mask) {
 268                 if (ssc_p->initialized) {
 269                         /* Shutdown the SSC clock. */
 270                         pr_debug("atmel_ssc_dai: Stopping clock\n");
 271                         clk_disable(ssc_p->ssc->clk);
 272
 273                         free_irq(ssc_p->ssc->irq, ssc_p);
 274                         ssc_p->initialized = 0;
 275                 }
 276
 277                 /* Reset the SSC */
 278                 ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
 279                 /* Clear the SSC dividers */
 280                 ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
 281         }
 282         spin_unlock_irq(&ssc_p->lock);
 283 }
 284
 285
 286 /*
 287  * Record the DAI format for use in hw_params().
 288  */
 289 static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 290                 unsigned int fmt)
 291 {
 292         struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
 293
 294         ssc_p->daifmt = fmt;
 295         return 0;
 296 }
 297
 298 /*
 299  * Record SSC clock dividers for use in hw_params().
 300  */
 301 static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
 302         int div_id, int div)
 303 {
 304         struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
 305
 306         switch (div_id) {
 307         case ATMEL_SSC_CMR_DIV:
 308                 /*
 309                  * The same master clock divider is used for both
 310                  * transmit and receive, so if a value has already
 311                  * been set, it must match this value.
 312                  */
 313                 if (ssc_p->dir_mask !=
 314                         (SSC_DIR_MASK_PLAYBACK | SSC_DIR_MASK_CAPTURE))
 315                         ssc_p->cmr_div = div;
 316                 else if (ssc_p->cmr_div == 0)
 317                         ssc_p->cmr_div = div;
 318                 else
 319                         if (div != ssc_p->cmr_div)
 320                                 return -EBUSY;
 321                 break;
 322
 323         case ATMEL_SSC_TCMR_PERIOD:
 324                 ssc_p->tcmr_period = div;
 325                 break;
 326
 327         case ATMEL_SSC_RCMR_PERIOD:
 328                 ssc_p->rcmr_period = div;
 329                 break;
 330
 331         default:
 332                 return -EINVAL;
 333         }
 334
 335         return 0;
 336 }
 337
 338 /*
 339  * Configure the SSC.
 340  */
 341 static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 342         struct snd_pcm_hw_params *params,
 343         struct snd_soc_dai *dai)
 344 {
 345         int id = dai->id;
 346         struct atmel_ssc_info *ssc_p = &ssc_info[id];
 347         struct ssc_device *ssc = ssc_p->ssc;
 348         struct atmel_pcm_dma_params *dma_params;
 349         int dir, channels, bits;
 350         u32 tfmr, rfmr, tcmr, rcmr;
 351         int ret;
 352         int fslen, fslen_ext;
 353
 354         /*
 355          * Currently, there is only one set of dma params for
 356          * each direction.  If more are added, this code will
 357          * have to be changed to select the proper set.
 358          */
 359         if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 360                 dir = 0;
 361         else
 362                 dir = 1;
 363
 364         dma_params = ssc_p->dma_params[dir];
 365
 366         channels = params_channels(params);
 367
 368         /*
 369          * Determine sample size in bits and the PDC increment.
 370          */
 371         switch (params_format(params)) {
 372         case SNDRV_PCM_FORMAT_S8:
 373                 bits = 8;
 374                 dma_params->pdc_xfer_size = 1;
 375                 break;
 376         case SNDRV_PCM_FORMAT_S16_LE:
 377                 bits = 16;
 378                 dma_params->pdc_xfer_size = 2;
 379                 break;
 380         case SNDRV_PCM_FORMAT_S24_LE:
 381                 bits = 24;
 382                 dma_params->pdc_xfer_size = 4;
 383                 break;
 384         case SNDRV_PCM_FORMAT_S32_LE:
 385                 bits = 32;
 386                 dma_params->pdc_xfer_size = 4;
 387                 break;
 388         default:
 389                 printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
 390                 return -EINVAL;
 391         }
 392
 393         /*
 394          * Compute SSC register settings.
 395          */
 396         switch (ssc_p->daifmt
 397                 & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
 398
 399         case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
 400                 /*
 401                  * I2S format, SSC provides BCLK and LRC clocks.
 402                  *
 403                  * The SSC transmit and receive clocks are generated
 404                  * from the MCK divider, and the BCLK signal
 405                  * is output on the SSC TK line.
 406                  */
 407
 408                 if (bits > 16 && !ssc->pdata->has_fslen_ext) {
 409                         dev_err(dai->dev,
 410                                 "sample size %d is too large for SSC device\n",
 411                                 bits);
 412                         return -EINVAL;
 413                 }
 414
 415                 fslen_ext = (bits - 1) / 16;
 416                 fslen = (bits - 1) % 16;
 417
 418                 rcmr =    SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
 419                         | SSC_BF(RCMR_STTDLY, START_DELAY)
 420                         | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
 421                         | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 422                         | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 423                         | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
 424
 425                 rfmr =    SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
 426                         | SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 427                         | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
 428                         | SSC_BF(RFMR_FSLEN, fslen)
 429                         | SSC_BF(RFMR_DATNB, (channels - 1))
 430                         | SSC_BIT(RFMR_MSBF)
 431                         | SSC_BF(RFMR_LOOP, 0)
 432                         | SSC_BF(RFMR_DATLEN, (bits - 1));
 433
 434                 tcmr =    SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
 435                         | SSC_BF(TCMR_STTDLY, START_DELAY)
 436                         | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
 437                         | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 438                         | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
 439                         | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
 440
 441                 tfmr =    SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
 442                         | SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 443                         | SSC_BF(TFMR_FSDEN, 0)
 444                         | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
 445                         | SSC_BF(TFMR_FSLEN, fslen)
 446                         | SSC_BF(TFMR_DATNB, (channels - 1))
 447                         | SSC_BIT(TFMR_MSBF)
 448                         | SSC_BF(TFMR_DATDEF, 0)
 449                         | SSC_BF(TFMR_DATLEN, (bits - 1));
 450                 break;
 451
 452         case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
 453                 /*
 454                  * I2S format, CODEC supplies BCLK and LRC clocks.
 455                  *
 456                  * The SSC transmit clock is obtained from the BCLK signal on
 457                  * on the TK line, and the SSC receive clock is
 458                  * generated from the transmit clock.
 459                  */
 460                 rcmr =    SSC_BF(RCMR_PERIOD, 0)
 461                         | SSC_BF(RCMR_STTDLY, START_DELAY)
 462                         | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
 463                         | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 464                         | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 465                         | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
 466                                            SSC_CKS_PIN : SSC_CKS_CLOCK);
 467
 468                 rfmr =    SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 469                         | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
 470                         | SSC_BF(RFMR_FSLEN, 0)
 471                         | SSC_BF(RFMR_DATNB, (channels - 1))
 472                         | SSC_BIT(RFMR_MSBF)
 473                         | SSC_BF(RFMR_LOOP, 0)
 474                         | SSC_BF(RFMR_DATLEN, (bits - 1));
 475
 476                 tcmr =    SSC_BF(TCMR_PERIOD, 0)
 477                         | SSC_BF(TCMR_STTDLY, START_DELAY)
 478                         | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
 479                         | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 480                         | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
 481                         | SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
 482                                            SSC_CKS_CLOCK : SSC_CKS_PIN);
 483
 484                 tfmr =    SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 485                         | SSC_BF(TFMR_FSDEN, 0)
 486                         | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
 487                         | SSC_BF(TFMR_FSLEN, 0)
 488                         | SSC_BF(TFMR_DATNB, (channels - 1))
 489                         | SSC_BIT(TFMR_MSBF)
 490                         | SSC_BF(TFMR_DATDEF, 0)
 491                         | SSC_BF(TFMR_DATLEN, (bits - 1));
 492                 break;
 493
 494         case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
 495                 /*
 496                  * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
 497                  *
 498                  * The SSC transmit and receive clocks are generated from the
 499                  * MCK divider, and the BCLK signal is output
 500                  * on the SSC TK line.
 501                  */
 502                 rcmr =    SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
 503                         | SSC_BF(RCMR_STTDLY, 1)
 504                         | SSC_BF(RCMR_START, SSC_START_RISING_RF)
 505                         | SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 506                         | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 507                         | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
 508
 509                 rfmr =    SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 510                         | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE)
 511                         | SSC_BF(RFMR_FSLEN, 0)
 512                         | SSC_BF(RFMR_DATNB, (channels - 1))
 513                         | SSC_BIT(RFMR_MSBF)
 514                         | SSC_BF(RFMR_LOOP, 0)
 515                         | SSC_BF(RFMR_DATLEN, (bits - 1));
 516
 517                 tcmr =    SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
 518                         | SSC_BF(TCMR_STTDLY, 1)
 519                         | SSC_BF(TCMR_START, SSC_START_RISING_RF)
 520                         | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 521                         | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
 522                         | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
 523
 524                 tfmr =    SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 525                         | SSC_BF(TFMR_FSDEN, 0)
 526                         | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE)
 527                         | SSC_BF(TFMR_FSLEN, 0)
 528                         | SSC_BF(TFMR_DATNB, (channels - 1))
 529                         | SSC_BIT(TFMR_MSBF)
 530                         | SSC_BF(TFMR_DATDEF, 0)
 531                         | SSC_BF(TFMR_DATLEN, (bits - 1));
 532                 break;
 533
 534         case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
 535                 /*
 536                  * DSP/PCM Mode A format, CODEC supplies BCLK and LRC clocks.
 537                  *
 538                  * The SSC transmit clock is obtained from the BCLK signal on
 539                  * on the TK line, and the SSC receive clock is
 540                  * generated from the transmit clock.
 541                  *
 542                  * Data is transferred on first BCLK after LRC pulse rising
 543                  * edge.If stereo, the right channel data is contiguous with
 544                  * the left channel data.
 545                  */
 546                 rcmr =    SSC_BF(RCMR_PERIOD, 0)
 547                         | SSC_BF(RCMR_STTDLY, START_DELAY)
 548                         | SSC_BF(RCMR_START, SSC_START_RISING_RF)
 549                         | SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
 550                         | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
 551                         | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
 552                                            SSC_CKS_PIN : SSC_CKS_CLOCK);
 553
 554                 rfmr =    SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 555                         | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
 556                         | SSC_BF(RFMR_FSLEN, 0)
 557                         | SSC_BF(RFMR_DATNB, (channels - 1))
 558                         | SSC_BIT(RFMR_MSBF)
 559                         | SSC_BF(RFMR_LOOP, 0)
 560                         | SSC_BF(RFMR_DATLEN, (bits - 1));
 561
 562                 tcmr =    SSC_BF(TCMR_PERIOD, 0)
 563                         | SSC_BF(TCMR_STTDLY, START_DELAY)
 564                         | SSC_BF(TCMR_START, SSC_START_RISING_RF)
 565                         | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 566                         | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
 567                         | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
 568                                            SSC_CKS_CLOCK : SSC_CKS_PIN);
 569
 570                 tfmr =    SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 571                         | SSC_BF(TFMR_FSDEN, 0)
 572                         | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
 573                         | SSC_BF(TFMR_FSLEN, 0)
 574                         | SSC_BF(TFMR_DATNB, (channels - 1))
 575                         | SSC_BIT(TFMR_MSBF)
 576                         | SSC_BF(TFMR_DATDEF, 0)
 577                         | SSC_BF(TFMR_DATLEN, (bits - 1));
 578                 break;
 579
 580         default:
 581                 printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
 582                         ssc_p->daifmt);
 583                 return -EINVAL;
 584         }
 585         pr_debug("atmel_ssc_hw_params: "
 586                         "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
 587                         rcmr, rfmr, tcmr, tfmr);
 588
 589         if (!ssc_p->initialized) {
 590
 591                 /* Enable PMC peripheral clock for this SSC */
 592                 pr_debug("atmel_ssc_dai: Starting clock\n");
 593                 clk_enable(ssc_p->ssc->clk);
 594
 595                 /* Reset the SSC and its PDC registers */
 596                 ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
 597
 598                 ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
 599                 ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
 600                 ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
 601                 ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
 602
 603                 ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
 604                 ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
 605                 ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
 606                 ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
 607
 608                 ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
 609                                 ssc_p->name, ssc_p);
 610                 if (ret < 0) {
 611                         printk(KERN_WARNING
 612                                         "atmel_ssc_dai: request_irq failure\n");
 613                         pr_debug("Atmel_ssc_dai: Stoping clock\n");
 614                         clk_disable(ssc_p->ssc->clk);
 615                         return ret;
 616                 }
 617
 618                 ssc_p->initialized = 1;
 619         }
 620
 621         /* set SSC clock mode register */
 622         ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
 623
 624         /* set receive clock mode and format */
 625         ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
 626         ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
 627
 628         /* set transmit clock mode and format */
 629         ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
 630         ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
 631
 632         pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
 633         return 0;
 634 }
 635
 636
 637 static int atmel_ssc_prepare(struct snd_pcm_substream *substream,
 638                              struct snd_soc_dai *dai)
 639 {
 640         struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
 641         struct atmel_pcm_dma_params *dma_params;
 642         int dir;
 643
 644         if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 645                 dir = 0;
 646         else
 647                 dir = 1;
 648
 649         dma_params = ssc_p->dma_params[dir];
 650
 651         ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
 652         ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error);
 653
 654         pr_debug("%s enabled SSC_SR=0x%08x\n",
 655                         dir ? "receive" : "transmit",
 656                         ssc_readl(ssc_p->ssc->regs, SR));
 657         return 0;
 658 }
 659
 660 static int atmel_ssc_trigger(struct snd_pcm_substream *substream,
 661                              int cmd, struct snd_soc_dai *dai)
 662 {
 663         struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
 664         struct atmel_pcm_dma_params *dma_params;
 665         int dir;
 666
 667         if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 668                 dir = 0;
 669         else
 670                 dir = 1;
 671
 672         dma_params = ssc_p->dma_params[dir];
 673
 674         switch (cmd) {
 675         case SNDRV_PCM_TRIGGER_START:
 676         case SNDRV_PCM_TRIGGER_RESUME:
 677         case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 678                 ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
 679                 break;
 680         default:
 681                 ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
 682                 break;
 683         }
 684
 685         return 0;
 686 }
 687
 688 #ifdef CONFIG_PM
 689 static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai)
 690 {
 691         struct atmel_ssc_info *ssc_p;
 692
 693         if (!cpu_dai->active)
 694                 return 0;
 695
 696         ssc_p = &ssc_info[cpu_dai->id];
 697
 698         /* Save the status register before disabling transmit and receive */
 699         ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
 700         ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
 701
 702         /* Save the current interrupt mask, then disable unmasked interrupts */
 703         ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
 704         ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
 705
 706         ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
 707         ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
 708         ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
 709         ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
 710         ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
 711
 712         return 0;
 713 }
 714
 715
 716
 717 static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai)
 718 {
 719         struct atmel_ssc_info *ssc_p;
 720         u32 cr;
 721
 722         if (!cpu_dai->active)
 723                 return 0;
 724
 725         ssc_p = &ssc_info[cpu_dai->id];
 726
 727         /* restore SSC register settings */
 728         ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
 729         ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
 730         ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
 731         ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
 732         ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
 733
 734         /* re-enable interrupts */
 735         ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
 736
 737         /* Re-enable receive and transmit as appropriate */
 738         cr = 0;
 739         cr |=
 740             (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
 741         cr |=
 742             (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
 743         ssc_writel(ssc_p->ssc->regs, CR, cr);
 744
 745         return 0;
 746 }
 747 #else /* CONFIG_PM */
 748 #  define atmel_ssc_suspend     NULL
 749 #  define atmel_ssc_resume      NULL
 750 #endif /* CONFIG_PM */
 751
 752 #define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000)
 753
 754 #define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8     | SNDRV_PCM_FMTBIT_S16_LE |\
 755                           SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
 756
 757 static const struct snd_soc_dai_ops atmel_ssc_dai_ops = {
 758         .startup        = atmel_ssc_startup,
 759         .shutdown       = atmel_ssc_shutdown,
 760         .prepare        = atmel_ssc_prepare,
 761         .trigger        = atmel_ssc_trigger,
 762         .hw_params      = atmel_ssc_hw_params,
 763         .set_fmt        = atmel_ssc_set_dai_fmt,
 764         .set_clkdiv     = atmel_ssc_set_dai_clkdiv,
 765 };
 766
 767 static struct snd_soc_dai_driver atmel_ssc_dai = {
 768                 .suspend = atmel_ssc_suspend,
 769                 .resume = atmel_ssc_resume,
 770                 .playback = {
 771                         .channels_min = 1,
 772                         .channels_max = 2,
 773                         .rates = ATMEL_SSC_RATES,
 774                         .formats = ATMEL_SSC_FORMATS,},
 775                 .capture = {
 776                         .channels_min = 1,
 777                         .channels_max = 2,
 778                         .rates = ATMEL_SSC_RATES,
 779                         .formats = ATMEL_SSC_FORMATS,},
 780                 .ops = &atmel_ssc_dai_ops,
 781 };
 782
 783 static const struct snd_soc_component_driver atmel_ssc_component = {
 784         .name           = "atmel-ssc",
 785 };
 786
 787 static int asoc_ssc_init(struct device *dev)
 788 {
 789         struct platform_device *pdev = to_platform_device(dev);
 790         struct ssc_device *ssc = platform_get_drvdata(pdev);
 791         int ret;
 792
 793         ret = snd_soc_register_component(dev, &atmel_ssc_component,
 794                                          &atmel_ssc_dai, 1);
 795         if (ret) {
 796                 dev_err(dev, "Could not register DAI: %d\n", ret);
 797                 goto err;
 798         }
 799
 800         if (ssc->pdata->use_dma)
 801                 ret = atmel_pcm_dma_platform_register(dev);
 802         else
 803                 ret = atmel_pcm_pdc_platform_register(dev);
 804
 805         if (ret) {
 806                 dev_err(dev, "Could not register PCM: %d\n", ret);
 807                 goto err_unregister_dai;
 808         }
 809
 810         return 0;
 811
 812 err_unregister_dai:
 813         snd_soc_unregister_component(dev);
 814 err:
 815         return ret;
 816 }
 817
 818 static void asoc_ssc_exit(struct device *dev)
 819 {
 820         struct platform_device *pdev = to_platform_device(dev);
 821         struct ssc_device *ssc = platform_get_drvdata(pdev);
 822
 823         if (ssc->pdata->use_dma)
 824                 atmel_pcm_dma_platform_unregister(dev);
 825         else
 826                 atmel_pcm_pdc_platform_unregister(dev);
 827
 828         snd_soc_unregister_component(dev);
 829 }
 830
 831 /**
 832  * atmel_ssc_set_audio - Allocate the specified SSC for audio use.
 833  */
 834 int atmel_ssc_set_audio(int ssc_id)
 835 {
 836         struct ssc_device *ssc;
 837         int ret;
 838
 839         /* If we can grab the SSC briefly to parent the DAI device off it */
 840         ssc = ssc_request(ssc_id);
 841         if (IS_ERR(ssc)) {
 842                 pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n",
 843                         PTR_ERR(ssc));
 844                 return PTR_ERR(ssc);
 845         } else {
 846                 ssc_info[ssc_id].ssc = ssc;
 847         }
 848
 849         ret = asoc_ssc_init(&ssc->pdev->dev);
 850
 851         return ret;
 852 }
 853 EXPORT_SYMBOL_GPL(atmel_ssc_set_audio);
 854
 855 void atmel_ssc_put_audio(int ssc_id)
 856 {
 857         struct ssc_device *ssc = ssc_info[ssc_id].ssc;
 858
 859         asoc_ssc_exit(&ssc->pdev->dev);
 860         ssc_free(ssc);
 861 }
 862 EXPORT_SYMBOL_GPL(atmel_ssc_put_audio);
 863
 864 /* Module information */
 865 MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com");
 866 MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
 867 MODULE_LICENSE("GPL");