sound/soc/blackfin/Kconfig

   1 config SND_BF5XX_I2S
   2         tristate "SoC I2S Audio for the ADI Blackfin chip"
   3         depends on BLACKFIN
   4         select SND_BF5XX_SOC_SPORT if !BF60x
   5         select SND_BF6XX_SOC_SPORT if BF60x
   6         help
   7           Say Y or M if you want to add support for codecs attached to
   8           the Blackfin SPORT (synchronous serial ports) interface in I2S
   9           mode (supports single stereo In/Out).
  10           You will also need to select the audio interfaces to support below.
  11
  12 config SND_BF5XX_SOC_SSM2602
  13         tristate "SoC SSM2602 Audio Codec Add-On Card support"
  14         depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
  15         select SND_BF5XX_SOC_I2S if !BF60x
  16         select SND_BF6XX_SOC_I2S if BF60x
  17         select SND_SOC_SSM2602
  18         help
  19           Say Y if you want to add support for the Analog Devices
  20           SSM2602 Audio Codec Add-On Card.
  21
  22 config SND_SOC_BFIN_EVAL_ADAU1701
  23         tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards"
  24         depends on SND_BF5XX_I2S && I2C
  25         select SND_BF5XX_SOC_I2S
  26         select SND_SOC_ADAU1701
  27         help
  28           Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ
  29           board connected to one of the Blackfin evaluation boards like the
  30           BF5XX-STAMP or BF5XX-EZKIT.
  31
  32 config SND_SOC_BFIN_EVAL_ADAU1373
  33         tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards"
  34         depends on SND_BF5XX_I2S && I2C
  35         select SND_BF5XX_SOC_I2S
  36         select SND_SOC_ADAU1373
  37         help
  38           Say Y if you want to add support for the Analog Devices EVAL-ADAU1373
  39           board connected to one of the Blackfin evaluation boards like the
  40           BF5XX-STAMP or BF5XX-EZKIT.
  41
  42           Note: This driver assumes that first ADAU1373 DAI is connected to the
  43           first SPORT port on the BF5XX board.
  44
  45 config SND_SOC_BFIN_EVAL_ADAV80X
  46         tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
  47         depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
  48         select SND_BF5XX_SOC_I2S
  49         select SND_SOC_ADAV80X
  50         help
  51           Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or
  52           EVAL-ADAV803 board connected to one of the Blackfin evaluation boards
  53           like the BF5XX-STAMP or BF5XX-EZKIT.
  54
  55           Note: This driver assumes that the ADAV80X digital record and playback
  56           interfaces are connected to the first SPORT port on the BF5XX board.
  57
  58 config SND_BF5XX_SOC_AD1836
  59         tristate "SoC AD1836 Audio support for BF5xx"
  60         depends on SND_BF5XX_I2S && SPI_MASTER
  61         select SND_BF5XX_SOC_I2S
  62         select SND_SOC_AD1836
  63         help
  64           Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
  65
  66 config SND_BF5XX_SOC_AD193X
  67         tristate "SoC AD193X Audio support for Blackfin"
  68         depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
  69         select SND_BF5XX_SOC_I2S
  70         select SND_SOC_AD193X
  71         help
  72           Say Y if you want to add support for AD193X codec on Blackfin.
  73           This driver supports AD1936, AD1937, AD1938 and AD1939.
  74
  75 config SND_BF5XX_SOC_AD73311
  76         tristate "SoC AD73311 Audio support for Blackfin"
  77         depends on SND_BF5XX_I2S
  78         select SND_BF5XX_SOC_I2S
  79         select SND_SOC_AD73311
  80         help
  81           Say Y if you want to add support for AD73311 codec on Blackfin.
  82
  83 config SND_BFIN_AD73311_SE
  84         int "PF pin for AD73311L Chip Select"
  85         depends on SND_BF5XX_SOC_AD73311
  86         default 4
  87         help
  88           Enter the GPIO used to control AD73311's SE pin. Acceptable
  89           values are 0 to 7
  90
  91 config SND_BF5XX_AC97
  92         tristate "SoC AC97 Audio for the ADI BF5xx chip"
  93         depends on BLACKFIN
  94         select AC97_BUS
  95         select SND_SOC_AC97_BUS
  96         select SND_BF5XX_SOC_SPORT
  97         select SND_BF5XX_SOC_AC97
  98         help
  99           Say Y or M if you want to add support for codecs attached to
 100           the Blackfin SPORT (synchronous serial ports) interface in slot 16
 101           mode (pseudo AC97 interface).
 102           You will also need to select the audio interfaces to support below.
 103
 104           Note:
 105           AC97 codecs which do not implement the slot-16 mode will not function
 106           properly with this driver. This driver is known to work with the
 107           Analog Devices line of AC97 codecs.
 108
 109 config SND_BF5XX_MMAP_SUPPORT
 110         bool "Enable MMAP Support"
 111         depends on SND_BF5XX_AC97
 112         default y
 113         help
 114           Say y if you want AC97 driver to support mmap mode.
 115           We introduce an intermediate buffer to simulate mmap.
 116
 117 config SND_BF5XX_MULTICHAN_SUPPORT
 118         bool "Enable Multichannel Support"
 119         depends on SND_BF5XX_AC97
 120         default n
 121         help
 122           Say y if you want AC97 driver to support up to 5.1 channel audio.
 123           this mode will consume much more memory for DMA.
 124
 125 config SND_BF5XX_HAVE_COLD_RESET
 126         bool "BOARD has COLD Reset GPIO"
 127         depends on SND_BF5XX_AC97
 128         default y if BFIN548_EZKIT
 129         default n if !BFIN548_EZKIT
 130
 131 config SND_BF5XX_RESET_GPIO_NUM
 132         int "Set a GPIO for cold reset"
 133         depends on SND_BF5XX_HAVE_COLD_RESET
 134         range 0 159
 135         default 19 if BFIN548_EZKIT
 136         default 5 if BFIN537_STAMP
 137         default 0
 138         help
 139           Set the correct GPIO for RESET the sound chip.
 140
 141 config SND_BF5XX_SOC_AD1980
 142         tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
 143         depends on SND_BF5XX_AC97
 144         select SND_BF5XX_SOC_AC97
 145         select SND_SOC_AD1980
 146         help
 147           Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
 148
 149           Warning:
 150           Because Analog Devices Inc. discontinued the ad1980 sound chip since
 151           Sep. 2009, this ad1980 driver is not maintained, tested and supported
 152           by ADI now.
 153
 154 config SND_BF5XX_SOC_SPORT
 155         tristate
 156
 157 config SND_BF6XX_SOC_SPORT
 158         tristate
 159
 160 config SND_BF5XX_SOC_I2S
 161         tristate
 162
 163 config SND_BF6XX_SOC_I2S
 164         tristate
 165
 166 config SND_BF5XX_SOC_AC97
 167         tristate
 168
 169 config SND_BF5XX_SPORT_NUM
 170         int "Set a SPORT for Sound chip"
 171         depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT)
 172         range 0 3 if BF54x
 173         range 0 1 if !BF54x
 174         default 0
 175         help
 176           Set the correct SPORT for sound chip.