1 # Helper to resolve issues with configs that have SPI enabled but I2C
2 # modular, meaning we can't build the codec driver in with I2C support.
3 # We use an ordered list of conditional defaults to pick the appropriate
4 # setting - SPI can't be modular so that case doesn't need to be covered.
5 config SND_SOC_I2C_AND_SPI
9 default y if SPI_MASTER=y
11 config SND_SOC_ALL_CODECS
12 tristate "Build all ASoC CODEC drivers"
14 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
15 select SND_SOC_AD1980 if SND_SOC_AC97_BUS
16 select SND_SOC_AD73311 if I2C
17 select SND_SOC_AK4104 if SPI_MASTER
18 select SND_SOC_AK4535 if I2C
19 select SND_SOC_CS4270 if I2C
20 select SND_SOC_PCM3008
22 select SND_SOC_SSM2602 if I2C
23 select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
24 select SND_SOC_TLV320AIC23 if I2C
25 select SND_SOC_TLV320AIC26 if SPI_MASTER
26 select SND_SOC_TLV320AIC3X if I2C
27 select SND_SOC_TWL4030 if TWL4030_CORE
28 select SND_SOC_UDA134X
29 select SND_SOC_UDA1380 if I2C
30 select SND_SOC_WM8350 if MFD_WM8350
31 select SND_SOC_WM8400 if MFD_WM8400
32 select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
33 select SND_SOC_WM8580 if I2C
34 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
35 select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
36 select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
37 select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
38 select SND_SOC_WM8900 if I2C
39 select SND_SOC_WM8903 if I2C
40 select SND_SOC_WM8940 if I2C
41 select SND_SOC_WM8960 if I2C
42 select SND_SOC_WM8961 if I2C
43 select SND_SOC_WM8971 if I2C
44 select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
45 select SND_SOC_WM8990 if I2C
46 select SND_SOC_WM9081 if I2C
47 select SND_SOC_WM9705 if SND_SOC_AC97_BUS
48 select SND_SOC_WM9712 if SND_SOC_AC97_BUS
49 select SND_SOC_WM9713 if SND_SOC_AC97_BUS
51 Normally ASoC codec drivers are only built if a machine driver which
52 uses them is also built since they are only usable with a machine
53 driver. Selecting this option will allow these drivers to be built
54 without an explicit machine driver for test and development purposes.
56 Support for the bus types used to access the codecs to be built must
57 be selected separately.
62 config SND_SOC_AC97_CODEC
69 config SND_SOC_AD73311
78 # Cirrus Logic CS4270 Codec
82 # Cirrus Logic CS4270 Codec VD = 3.3V Errata
83 # Select if you are affected by the errata where the part will not function
84 # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
85 # not select any sample rates that require MCLK to be divided by 1.5.
86 config SND_SOC_CS4270_VD33_ERRATA
88 depends on SND_SOC_CS4270
93 config SND_SOC_PCM3008
99 config SND_SOC_SSM2602
102 config SND_SOC_STAC9766
105 config SND_SOC_TLV320AIC23
108 config SND_SOC_TLV320AIC26
109 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
112 config SND_SOC_TLV320AIC3X
115 config SND_SOC_TWL4030
118 config SND_SOC_UDA134X
121 config SND_SOC_UDA1380
124 config SND_SOC_WM8350
127 config SND_SOC_WM8400
130 config SND_SOC_WM8510
133 config SND_SOC_WM8580
136 config SND_SOC_WM8728
139 config SND_SOC_WM8731
142 config SND_SOC_WM8750
145 config SND_SOC_WM8753
148 config SND_SOC_WM8900
151 config SND_SOC_WM8903
154 config SND_SOC_WM8940
157 config SND_SOC_WM8960
160 config SND_SOC_WM8961
163 config SND_SOC_WM8971
166 config SND_SOC_WM8988
169 config SND_SOC_WM8990
172 config SND_SOC_WM9081
175 config SND_SOC_WM9705
178 config SND_SOC_WM9712
181 config SND_SOC_WM9713