sound/soc/codecs/tpa6130a2.c

   1 /*
   2  * ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver
   3  *
   4  * Copyright (C) Nokia Corporation
   5  *
   6  * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/errno.h>
  25 #include <linux/device.h>
  26 #include <linux/i2c.h>
  27 #include <linux/gpio.h>
  28 #include <linux/regulator/consumer.h>
  29 #include <linux/slab.h>
  30 #include <sound/tpa6130a2-plat.h>
  31 #include <sound/soc.h>
  32 #include <sound/tlv.h>
  33 #include <linux/of.h>
  34 #include <linux/of_gpio.h>
  35
  36 #include "tpa6130a2.h"
  37
  38 enum tpa_model {
  39         TPA6130A2,
  40         TPA6140A2,
  41 };
  42
  43 static struct i2c_client *tpa6130a2_client;
  44
  45 /* This struct is used to save the context */
  46 struct tpa6130a2_data {
  47         struct mutex mutex;
  48         unsigned char regs[TPA6130A2_CACHEREGNUM];
  49         struct regulator *supply;
  50         int power_gpio;
  51         u8 power_state:1;
  52         enum tpa_model id;
  53 };
  54
  55 static int tpa6130a2_i2c_read(int reg)
  56 {
  57         struct tpa6130a2_data *data;
  58         int val;
  59
  60         if (WARN_ON(!tpa6130a2_client))
  61                 return -EINVAL;
  62         data = i2c_get_clientdata(tpa6130a2_client);
  63
  64         /* If powered off, return the cached value */
  65         if (data->power_state) {
  66                 val = i2c_smbus_read_byte_data(tpa6130a2_client, reg);
  67                 if (val < 0)
  68                         dev_err(&tpa6130a2_client->dev, "Read failed\n");
  69                 else
  70                         data->regs[reg] = val;
  71         } else {
  72                 val = data->regs[reg];
  73         }
  74
  75         return val;
  76 }
  77
  78 static int tpa6130a2_i2c_write(int reg, u8 value)
  79 {
  80         struct tpa6130a2_data *data;
  81         int val = 0;
  82
  83         if (WARN_ON(!tpa6130a2_client))
  84                 return -EINVAL;
  85         data = i2c_get_clientdata(tpa6130a2_client);
  86
  87         if (data->power_state) {
  88                 val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
  89                 if (val < 0) {
  90                         dev_err(&tpa6130a2_client->dev, "Write failed\n");
  91                         return val;
  92                 }
  93         }
  94
  95         /* Either powered on or off, we save the context */
  96         data->regs[reg] = value;
  97
  98         return val;
  99 }
 100
 101 static u8 tpa6130a2_read(int reg)
 102 {
 103         struct tpa6130a2_data *data;
 104
 105         if (WARN_ON(!tpa6130a2_client))
 106                 return 0;
 107         data = i2c_get_clientdata(tpa6130a2_client);
 108
 109         return data->regs[reg];
 110 }
 111
 112 static int tpa6130a2_initialize(void)
 113 {
 114         struct tpa6130a2_data *data;
 115         int i, ret = 0;
 116
 117         if (WARN_ON(!tpa6130a2_client))
 118                 return -EINVAL;
 119         data = i2c_get_clientdata(tpa6130a2_client);
 120
 121         for (i = 1; i < TPA6130A2_REG_VERSION; i++) {
 122                 ret = tpa6130a2_i2c_write(i, data->regs[i]);
 123                 if (ret < 0)
 124                         break;
 125         }
 126
 127         return ret;
 128 }
 129
 130 static int tpa6130a2_power(u8 power)
 131 {
 132         struct  tpa6130a2_data *data;
 133         u8      val;
 134         int     ret = 0;
 135
 136         if (WARN_ON(!tpa6130a2_client))
 137                 return -EINVAL;
 138         data = i2c_get_clientdata(tpa6130a2_client);
 139
 140         mutex_lock(&data->mutex);
 141         if (power == data->power_state)
 142                 goto exit;
 143
 144         if (power) {
 145                 ret = regulator_enable(data->supply);
 146                 if (ret != 0) {
 147                         dev_err(&tpa6130a2_client->dev,
 148                                 "Failed to enable supply: %d\n", ret);
 149                         goto exit;
 150                 }
 151                 /* Power on */
 152                 if (data->power_gpio >= 0)
 153                         gpio_set_value(data->power_gpio, 1);
 154
 155                 data->power_state = 1;
 156                 ret = tpa6130a2_initialize();
 157                 if (ret < 0) {
 158                         dev_err(&tpa6130a2_client->dev,
 159                                 "Failed to initialize chip\n");
 160                         if (data->power_gpio >= 0)
 161                                 gpio_set_value(data->power_gpio, 0);
 162                         regulator_disable(data->supply);
 163                         data->power_state = 0;
 164                         goto exit;
 165                 }
 166         } else {
 167                 /* set SWS */
 168                 val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
 169                 val |= TPA6130A2_SWS;
 170                 tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
 171
 172                 /* Power off */
 173                 if (data->power_gpio >= 0)
 174                         gpio_set_value(data->power_gpio, 0);
 175
 176                 ret = regulator_disable(data->supply);
 177                 if (ret != 0) {
 178                         dev_err(&tpa6130a2_client->dev,
 179                                 "Failed to disable supply: %d\n", ret);
 180                         goto exit;
 181                 }
 182
 183                 data->power_state = 0;
 184         }
 185
 186 exit:
 187         mutex_unlock(&data->mutex);
 188         return ret;
 189 }
 190
 191 static int tpa6130a2_get_volsw(struct snd_kcontrol *kcontrol,
 192                 struct snd_ctl_elem_value *ucontrol)
 193 {
 194         struct soc_mixer_control *mc =
 195                 (struct soc_mixer_control *)kcontrol->private_value;
 196         struct tpa6130a2_data *data;
 197         unsigned int reg = mc->reg;
 198         unsigned int shift = mc->shift;
 199         int max = mc->max;
 200         unsigned int mask = (1 << fls(max)) - 1;
 201         unsigned int invert = mc->invert;
 202
 203         if (WARN_ON(!tpa6130a2_client))
 204                 return -EINVAL;
 205         data = i2c_get_clientdata(tpa6130a2_client);
 206
 207         mutex_lock(&data->mutex);
 208
 209         ucontrol->value.integer.value[0] =
 210                 (tpa6130a2_read(reg) >> shift) & mask;
 211
 212         if (invert)
 213                 ucontrol->value.integer.value[0] =
 214                         max - ucontrol->value.integer.value[0];
 215
 216         mutex_unlock(&data->mutex);
 217         return 0;
 218 }
 219
 220 static int tpa6130a2_put_volsw(struct snd_kcontrol *kcontrol,
 221                 struct snd_ctl_elem_value *ucontrol)
 222 {
 223         struct soc_mixer_control *mc =
 224                 (struct soc_mixer_control *)kcontrol->private_value;
 225         struct tpa6130a2_data *data;
 226         unsigned int reg = mc->reg;
 227         unsigned int shift = mc->shift;
 228         int max = mc->max;
 229         unsigned int mask = (1 << fls(max)) - 1;
 230         unsigned int invert = mc->invert;
 231         unsigned int val = (ucontrol->value.integer.value[0] & mask);
 232         unsigned int val_reg;
 233
 234         if (WARN_ON(!tpa6130a2_client))
 235                 return -EINVAL;
 236         data = i2c_get_clientdata(tpa6130a2_client);
 237
 238         if (invert)
 239                 val = max - val;
 240
 241         mutex_lock(&data->mutex);
 242
 243         val_reg = tpa6130a2_read(reg);
 244         if (((val_reg >> shift) & mask) == val) {
 245                 mutex_unlock(&data->mutex);
 246                 return 0;
 247         }
 248
 249         val_reg &= ~(mask << shift);
 250         val_reg |= val << shift;
 251         tpa6130a2_i2c_write(reg, val_reg);
 252
 253         mutex_unlock(&data->mutex);
 254
 255         return 1;
 256 }
 257
 258 /*
 259  * TPA6130 volume. From -59.5 to 4 dB with increasing step size when going
 260  * down in gain.
 261  */
 262 static const DECLARE_TLV_DB_RANGE(tpa6130_tlv,
 263         0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0),
 264         2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0),
 265         4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0),
 266         6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0),
 267         8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0),
 268         10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0),
 269         12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0),
 270         14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0),
 271         21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0),
 272         38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0)
 273 );
 274
 275 static const struct snd_kcontrol_new tpa6130a2_controls[] = {
 276         SOC_SINGLE_EXT_TLV("TPA6130A2 Headphone Playback Volume",
 277                        TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0,
 278                        tpa6130a2_get_volsw, tpa6130a2_put_volsw,
 279                        tpa6130_tlv),
 280 };
 281
 282 static const DECLARE_TLV_DB_RANGE(tpa6140_tlv,
 283         0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0),
 284         9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0),
 285         17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0)
 286 );
 287
 288 static const struct snd_kcontrol_new tpa6140a2_controls[] = {
 289         SOC_SINGLE_EXT_TLV("TPA6140A2 Headphone Playback Volume",
 290                        TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0,
 291                        tpa6130a2_get_volsw, tpa6130a2_put_volsw,
 292                        tpa6140_tlv),
 293 };
 294
 295 /*
 296  * Enable or disable channel (left or right)
 297  * The bit number for mute and amplifier are the same per channel:
 298  * bit 6: Right channel
 299  * bit 7: Left channel
 300  * in both registers.
 301  */
 302 static void tpa6130a2_channel_enable(u8 channel, int enable)
 303 {
 304         u8      val;
 305
 306         if (enable) {
 307                 /* Enable channel */
 308                 /* Enable amplifier */
 309                 val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
 310                 val |= channel;
 311                 val &= ~TPA6130A2_SWS;
 312                 tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
 313
 314                 /* Unmute channel */
 315                 val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
 316                 val &= ~channel;
 317                 tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
 318         } else {
 319                 /* Disable channel */
 320                 /* Mute channel */
 321                 val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
 322                 val |= channel;
 323                 tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
 324
 325                 /* Disable amplifier */
 326                 val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
 327                 val &= ~channel;
 328                 tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
 329         }
 330 }
 331
 332 int tpa6130a2_stereo_enable(struct snd_soc_codec *codec, int enable)
 333 {
 334         int ret = 0;
 335         if (enable) {
 336                 ret = tpa6130a2_power(1);
 337                 if (ret < 0)
 338                         return ret;
 339                 tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
 340                                          1);
 341         } else {
 342                 tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
 343                                          0);
 344                 ret = tpa6130a2_power(0);
 345         }
 346
 347         return ret;
 348 }
 349 EXPORT_SYMBOL_GPL(tpa6130a2_stereo_enable);
 350
 351 int tpa6130a2_add_controls(struct snd_soc_codec *codec)
 352 {
 353         struct  tpa6130a2_data *data;
 354
 355         if (tpa6130a2_client == NULL)
 356                 return -ENODEV;
 357
 358         data = i2c_get_clientdata(tpa6130a2_client);
 359
 360         if (data->id == TPA6140A2)
 361                 return snd_soc_add_codec_controls(codec, tpa6140a2_controls,
 362                                                 ARRAY_SIZE(tpa6140a2_controls));
 363         else
 364                 return snd_soc_add_codec_controls(codec, tpa6130a2_controls,
 365                                                 ARRAY_SIZE(tpa6130a2_controls));
 366 }
 367 EXPORT_SYMBOL_GPL(tpa6130a2_add_controls);
 368
 369 static int tpa6130a2_probe(struct i2c_client *client,
 370                            const struct i2c_device_id *id)
 371 {
 372         struct device *dev;
 373         struct tpa6130a2_data *data;
 374         struct tpa6130a2_platform_data *pdata = client->dev.platform_data;
 375         struct device_node *np = client->dev.of_node;
 376         const char *regulator;
 377         int ret;
 378
 379         dev = &client->dev;
 380
 381         data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 382         if (!data)
 383                 return -ENOMEM;
 384
 385         if (pdata) {
 386                 data->power_gpio = pdata->power_gpio;
 387         } else if (np) {
 388                 data->power_gpio = of_get_named_gpio(np, "power-gpio", 0);
 389         } else {
 390                 dev_err(dev, "Platform data not set\n");
 391                 dump_stack();
 392                 return -ENODEV;
 393         }
 394
 395         tpa6130a2_client = client;
 396
 397         i2c_set_clientdata(tpa6130a2_client, data);
 398
 399         data->id = id->driver_data;
 400
 401         mutex_init(&data->mutex);
 402
 403         /* Set default register values */
 404         data->regs[TPA6130A2_REG_CONTROL] =     TPA6130A2_SWS;
 405         data->regs[TPA6130A2_REG_VOL_MUTE] =    TPA6130A2_MUTE_R |
 406                                                 TPA6130A2_MUTE_L;
 407
 408         if (data->power_gpio >= 0) {
 409                 ret = devm_gpio_request(dev, data->power_gpio,
 410                                         "tpa6130a2 enable");
 411                 if (ret < 0) {
 412                         dev_err(dev, "Failed to request power GPIO (%d)\n",
 413                                 data->power_gpio);
 414                         goto err_gpio;
 415                 }
 416                 gpio_direction_output(data->power_gpio, 0);
 417         }
 418
 419         switch (data->id) {
 420         default:
 421                 dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n",
 422                          data->id);
 423         case TPA6130A2:
 424                 regulator = "Vdd";
 425                 break;
 426         case TPA6140A2:
 427                 regulator = "AVdd";
 428                 break;
 429         }
 430
 431         data->supply = devm_regulator_get(dev, regulator);
 432         if (IS_ERR(data->supply)) {
 433                 ret = PTR_ERR(data->supply);
 434                 dev_err(dev, "Failed to request supply: %d\n", ret);
 435                 goto err_gpio;
 436         }
 437
 438         ret = tpa6130a2_power(1);
 439         if (ret != 0)
 440                 goto err_gpio;
 441
 442
 443         /* Read version */
 444         ret = tpa6130a2_i2c_read(TPA6130A2_REG_VERSION) &
 445                                  TPA6130A2_VERSION_MASK;
 446         if ((ret != 1) && (ret != 2))
 447                 dev_warn(dev, "UNTESTED version detected (%d)\n", ret);
 448
 449         /* Disable the chip */
 450         ret = tpa6130a2_power(0);
 451         if (ret != 0)
 452                 goto err_gpio;
 453
 454         return 0;
 455
 456 err_gpio:
 457         tpa6130a2_client = NULL;
 458
 459         return ret;
 460 }
 461
 462 static int tpa6130a2_remove(struct i2c_client *client)
 463 {
 464         tpa6130a2_power(0);
 465         tpa6130a2_client = NULL;
 466
 467         return 0;
 468 }
 469
 470 static const struct i2c_device_id tpa6130a2_id[] = {
 471         { "tpa6130a2", TPA6130A2 },
 472         { "tpa6140a2", TPA6140A2 },
 473         { }
 474 };
 475 MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);
 476
 477 #if IS_ENABLED(CONFIG_OF)
 478 static const struct of_device_id tpa6130a2_of_match[] = {
 479         { .compatible = "ti,tpa6130a2", },
 480         { .compatible = "ti,tpa6140a2" },
 481         {},
 482 };
 483 MODULE_DEVICE_TABLE(of, tpa6130a2_of_match);
 484 #endif
 485
 486 static struct i2c_driver tpa6130a2_i2c_driver = {
 487         .driver = {
 488                 .name = "tpa6130a2",
 489                 .of_match_table = of_match_ptr(tpa6130a2_of_match),
 490         },
 491         .probe = tpa6130a2_probe,
 492         .remove = tpa6130a2_remove,
 493         .id_table = tpa6130a2_id,
 494 };
 495
 496 module_i2c_driver(tpa6130a2_i2c_driver);
 497
 498 MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
 499 MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver");
 500 MODULE_LICENSE("GPL");