sound/soc/codecs/wm9090.c

   1 /*
   2  * ALSA SoC WM9090 driver
   3  *
   4  * Copyright 2009, 2010 Wolfson Microelectronics
   5  *
   6  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/errno.h>
  25 #include <linux/device.h>
  26 #include <linux/i2c.h>
  27 #include <linux/delay.h>
  28 #include <linux/slab.h>
  29 #include <sound/initval.h>
  30 #include <sound/soc.h>
  31 #include <sound/tlv.h>
  32 #include <sound/wm9090.h>
  33
  34 #include "wm9090.h"
  35
  36 static const u16 wm9090_reg_defaults[] = {
  37         0x9093,     /* R0   - Software Reset */
  38         0x0006,     /* R1   - Power Management (1) */
  39         0x6000,     /* R2   - Power Management (2) */
  40         0x0000,     /* R3   - Power Management (3) */
  41         0x0000,     /* R4 */
  42         0x0000,     /* R5 */
  43         0x01C0,     /* R6   - Clocking 1 */
  44         0x0000,     /* R7 */
  45         0x0000,     /* R8 */
  46         0x0000,     /* R9 */
  47         0x0000,     /* R10 */
  48         0x0000,     /* R11 */
  49         0x0000,     /* R12 */
  50         0x0000,     /* R13 */
  51         0x0000,     /* R14 */
  52         0x0000,     /* R15 */
  53         0x0000,     /* R16 */
  54         0x0000,     /* R17 */
  55         0x0000,     /* R18 */
  56         0x0000,     /* R19 */
  57         0x0000,     /* R20 */
  58         0x0000,     /* R21 */
  59         0x0003,     /* R22  - IN1 Line Control */
  60         0x0003,     /* R23  - IN2 Line Control */
  61         0x0083,     /* R24  - IN1 Line Input A Volume */
  62         0x0083,     /* R25  - IN1  Line Input B Volume */
  63         0x0083,     /* R26  - IN2 Line Input A Volume */
  64         0x0083,     /* R27  - IN2 Line Input B Volume */
  65         0x002D,     /* R28  - Left Output Volume */
  66         0x002D,     /* R29  - Right Output Volume */
  67         0x0000,     /* R30 */
  68         0x0000,     /* R31 */
  69         0x0000,     /* R32 */
  70         0x0000,     /* R33 */
  71         0x0100,     /* R34  - SPKMIXL Attenuation */
  72         0x0000,     /* R35 */
  73         0x0010,     /* R36  - SPKOUT Mixers */
  74         0x0140,     /* R37  - ClassD3 */
  75         0x0039,     /* R38  - Speaker Volume Left */
  76         0x0000,     /* R39 */
  77         0x0000,     /* R40 */
  78         0x0000,     /* R41 */
  79         0x0000,     /* R42 */
  80         0x0000,     /* R43 */
  81         0x0000,     /* R44 */
  82         0x0000,     /* R45  - Output Mixer1 */
  83         0x0000,     /* R46  - Output Mixer2 */
  84         0x0100,     /* R47  - Output Mixer3 */
  85         0x0100,     /* R48  - Output Mixer4 */
  86         0x0000,     /* R49 */
  87         0x0000,     /* R50 */
  88         0x0000,     /* R51 */
  89         0x0000,     /* R52 */
  90         0x0000,     /* R53 */
  91         0x0000,     /* R54  - Speaker Mixer */
  92         0x0000,     /* R55 */
  93         0x0000,     /* R56 */
  94         0x000D,     /* R57  - AntiPOP2 */
  95         0x0000,     /* R58 */
  96         0x0000,     /* R59 */
  97         0x0000,     /* R60 */
  98         0x0000,     /* R61 */
  99         0x0000,     /* R62 */
 100         0x0000,     /* R63 */
 101         0x0000,     /* R64 */
 102         0x0000,     /* R65 */
 103         0x0000,     /* R66 */
 104         0x0000,     /* R67 */
 105         0x0000,     /* R68 */
 106         0x0000,     /* R69 */
 107         0x0000,     /* R70  - Write Sequencer 0 */
 108         0x0000,     /* R71  - Write Sequencer 1 */
 109         0x0000,     /* R72  - Write Sequencer 2 */
 110         0x0000,     /* R73  - Write Sequencer 3 */
 111         0x0000,     /* R74  - Write Sequencer 4 */
 112         0x0000,     /* R75  - Write Sequencer 5 */
 113         0x1F25,     /* R76  - Charge Pump 1 */
 114         0x0000,     /* R77 */
 115         0x0000,     /* R78 */
 116         0x0000,     /* R79 */
 117         0x0000,     /* R80 */
 118         0x0000,     /* R81 */
 119         0x0000,     /* R82 */
 120         0x0000,     /* R83 */
 121         0x0000,     /* R84  - DC Servo 0 */
 122         0x054A,     /* R85  - DC Servo 1 */
 123         0x0000,     /* R86 */
 124         0x0000,     /* R87  - DC Servo 3 */
 125         0x0000,     /* R88  - DC Servo Readback 0 */
 126         0x0000,     /* R89  - DC Servo Readback 1 */
 127         0x0000,     /* R90  - DC Servo Readback 2 */
 128         0x0000,     /* R91 */
 129         0x0000,     /* R92 */
 130         0x0000,     /* R93 */
 131         0x0000,     /* R94 */
 132         0x0000,     /* R95 */
 133         0x0100,     /* R96  - Analogue HP 0 */
 134         0x0000,     /* R97 */
 135         0x8640,     /* R98  - AGC Control 0 */
 136         0xC000,     /* R99  - AGC Control 1 */
 137         0x0200,     /* R100 - AGC Control 2 */
 138 };
 139
 140 /* This struct is used to save the context */
 141 struct wm9090_priv {
 142         struct wm9090_platform_data pdata;
 143 };
 144
 145 static int wm9090_volatile(struct snd_soc_codec *codec, unsigned int reg)
 146 {
 147         switch (reg) {
 148         case WM9090_SOFTWARE_RESET:
 149         case WM9090_DC_SERVO_0:
 150         case WM9090_DC_SERVO_READBACK_0:
 151         case WM9090_DC_SERVO_READBACK_1:
 152         case WM9090_DC_SERVO_READBACK_2:
 153                 return 1;
 154
 155         default:
 156                 return 0;
 157         }
 158 }
 159
 160 static void wait_for_dc_servo(struct snd_soc_codec *codec)
 161 {
 162         unsigned int reg;
 163         int count = 0;
 164
 165         dev_dbg(codec->dev, "Waiting for DC servo...\n");
 166         do {
 167                 count++;
 168                 msleep(1);
 169                 reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0);
 170                 dev_dbg(codec->dev, "DC servo status: %x\n", reg);
 171         } while ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
 172                  != WM9090_DCS_CAL_COMPLETE_MASK && count < 1000);
 173
 174         if ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
 175             != WM9090_DCS_CAL_COMPLETE_MASK)
 176                 dev_err(codec->dev, "Timed out waiting for DC Servo\n");
 177 }
 178
 179 static const unsigned int in_tlv[] = {
 180         TLV_DB_RANGE_HEAD(3),
 181         0, 0, TLV_DB_SCALE_ITEM(-600, 0, 0),
 182         1, 3, TLV_DB_SCALE_ITEM(-350, 350, 0),
 183         4, 6, TLV_DB_SCALE_ITEM(600, 600, 0),
 184 };
 185 static const unsigned int mix_tlv[] = {
 186         TLV_DB_RANGE_HEAD(2),
 187         0, 2, TLV_DB_SCALE_ITEM(-1200, 300, 0),
 188         3, 3, TLV_DB_SCALE_ITEM(0, 0, 0),
 189 };
 190 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
 191 static const unsigned int spkboost_tlv[] = {
 192         TLV_DB_RANGE_HEAD(2),
 193         0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
 194         7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
 195 };
 196
 197 static const struct snd_kcontrol_new wm9090_controls[] = {
 198 SOC_SINGLE_TLV("IN1A Volume", WM9090_IN1_LINE_INPUT_A_VOLUME, 0, 6, 0,
 199                in_tlv),
 200 SOC_SINGLE("IN1A Switch", WM9090_IN1_LINE_INPUT_A_VOLUME, 7, 1, 1),
 201 SOC_SINGLE("IN1A ZC Switch", WM9090_IN1_LINE_INPUT_A_VOLUME, 6, 1, 0),
 202
 203 SOC_SINGLE_TLV("IN2A Volume", WM9090_IN2_LINE_INPUT_A_VOLUME, 0, 6, 0,
 204                in_tlv),
 205 SOC_SINGLE("IN2A Switch", WM9090_IN2_LINE_INPUT_A_VOLUME, 7, 1, 1),
 206 SOC_SINGLE("IN2A ZC Switch", WM9090_IN2_LINE_INPUT_A_VOLUME, 6, 1, 0),
 207
 208 SOC_SINGLE("MIXOUTL Switch", WM9090_OUTPUT_MIXER3, 8, 1, 1),
 209 SOC_SINGLE_TLV("MIXOUTL IN1A Volume", WM9090_OUTPUT_MIXER3, 6, 3, 1,
 210                mix_tlv),
 211 SOC_SINGLE_TLV("MIXOUTL IN2A Volume", WM9090_OUTPUT_MIXER3, 2, 3, 1,
 212                mix_tlv),
 213
 214 SOC_SINGLE("MIXOUTR Switch", WM9090_OUTPUT_MIXER4, 8, 1, 1),
 215 SOC_SINGLE_TLV("MIXOUTR IN1A Volume", WM9090_OUTPUT_MIXER4, 6, 3, 1,
 216                mix_tlv),
 217 SOC_SINGLE_TLV("MIXOUTR IN2A Volume", WM9090_OUTPUT_MIXER4, 2, 3, 1,
 218                mix_tlv),
 219
 220 SOC_SINGLE("SPKMIX Switch", WM9090_SPKMIXL_ATTENUATION, 8, 1, 1),
 221 SOC_SINGLE_TLV("SPKMIX IN1A Volume", WM9090_SPKMIXL_ATTENUATION, 6, 3, 1,
 222                mix_tlv),
 223 SOC_SINGLE_TLV("SPKMIX IN2A Volume", WM9090_SPKMIXL_ATTENUATION, 2, 3, 1,
 224                mix_tlv),
 225
 226 SOC_DOUBLE_R_TLV("Headphone Volume", WM9090_LEFT_OUTPUT_VOLUME,
 227                  WM9090_RIGHT_OUTPUT_VOLUME, 0, 63, 0, out_tlv),
 228 SOC_DOUBLE_R("Headphone Switch", WM9090_LEFT_OUTPUT_VOLUME,
 229              WM9090_RIGHT_OUTPUT_VOLUME, 6, 1, 1),
 230 SOC_DOUBLE_R("Headphone ZC Switch", WM9090_LEFT_OUTPUT_VOLUME,
 231              WM9090_RIGHT_OUTPUT_VOLUME, 7, 1, 0),
 232
 233 SOC_SINGLE_TLV("Speaker Volume", WM9090_SPEAKER_VOLUME_LEFT, 0, 63, 0,
 234                out_tlv),
 235 SOC_SINGLE("Speaker Switch", WM9090_SPEAKER_VOLUME_LEFT, 6, 1, 1),
 236 SOC_SINGLE("Speaker ZC Switch", WM9090_SPEAKER_VOLUME_LEFT, 7, 1, 0),
 237 SOC_SINGLE_TLV("Speaker Boost Volume", WM9090_CLASSD3, 3, 7, 0, spkboost_tlv),
 238 };
 239
 240 static const struct snd_kcontrol_new wm9090_in1_se_controls[] = {
 241 SOC_SINGLE_TLV("IN1B Volume", WM9090_IN1_LINE_INPUT_B_VOLUME, 0, 6, 0,
 242                in_tlv),
 243 SOC_SINGLE("IN1B Switch", WM9090_IN1_LINE_INPUT_B_VOLUME, 7, 1, 1),
 244 SOC_SINGLE("IN1B ZC Switch", WM9090_IN1_LINE_INPUT_B_VOLUME, 6, 1, 0),
 245
 246 SOC_SINGLE_TLV("SPKMIX IN1B Volume", WM9090_SPKMIXL_ATTENUATION, 4, 3, 1,
 247                mix_tlv),
 248 SOC_SINGLE_TLV("MIXOUTL IN1B Volume", WM9090_OUTPUT_MIXER3, 4, 3, 1,
 249                mix_tlv),
 250 SOC_SINGLE_TLV("MIXOUTR IN1B Volume", WM9090_OUTPUT_MIXER4, 4, 3, 1,
 251                mix_tlv),
 252 };
 253
 254 static const struct snd_kcontrol_new wm9090_in2_se_controls[] = {
 255 SOC_SINGLE_TLV("IN2B Volume", WM9090_IN2_LINE_INPUT_B_VOLUME, 0, 6, 0,
 256                in_tlv),
 257 SOC_SINGLE("IN2B Switch", WM9090_IN2_LINE_INPUT_B_VOLUME, 7, 1, 1),
 258 SOC_SINGLE("IN2B ZC Switch", WM9090_IN2_LINE_INPUT_B_VOLUME, 6, 1, 0),
 259
 260 SOC_SINGLE_TLV("SPKMIX IN2B Volume", WM9090_SPKMIXL_ATTENUATION, 0, 3, 1,
 261                mix_tlv),
 262 SOC_SINGLE_TLV("MIXOUTL IN2B Volume", WM9090_OUTPUT_MIXER3, 0, 3, 1,
 263                mix_tlv),
 264 SOC_SINGLE_TLV("MIXOUTR IN2B Volume", WM9090_OUTPUT_MIXER4, 0, 3, 1,
 265                mix_tlv),
 266 };
 267
 268 static int hp_ev(struct snd_soc_dapm_widget *w,
 269                  struct snd_kcontrol *kcontrol, int event)
 270 {
 271         struct snd_soc_codec *codec = w->codec;
 272         unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0);
 273
 274         switch (event) {
 275         case SND_SOC_DAPM_POST_PMU:
 276                 snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
 277                                     WM9090_CP_ENA, WM9090_CP_ENA);
 278
 279                 msleep(5);
 280
 281                 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
 282                                     WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
 283                                     WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA);
 284
 285                 reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY;
 286                 snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
 287
 288                 /* Start the DC servo.  We don't currently use the
 289                  * ability to save the state since we don't have full
 290                  * control of the analogue paths and they can change
 291                  * DC offsets; see the WM8904 driver for an example of
 292                  * doing so.
 293                  */
 294                 snd_soc_write(codec, WM9090_DC_SERVO_0,
 295                               WM9090_DCS_ENA_CHAN_0 |
 296                               WM9090_DCS_ENA_CHAN_1 |
 297                               WM9090_DCS_TRIG_STARTUP_1 |
 298                               WM9090_DCS_TRIG_STARTUP_0);
 299                 wait_for_dc_servo(codec);
 300
 301                 reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT |
 302                         WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT;
 303                 snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
 304                 break;
 305
 306         case SND_SOC_DAPM_PRE_PMD:
 307                 reg &= ~(WM9090_HPOUT1L_RMV_SHORT |
 308                          WM9090_HPOUT1L_DLY |
 309                          WM9090_HPOUT1L_OUTP |
 310                          WM9090_HPOUT1R_RMV_SHORT |
 311                          WM9090_HPOUT1R_DLY |
 312                          WM9090_HPOUT1R_OUTP);
 313
 314                 snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
 315
 316                 snd_soc_write(codec, WM9090_DC_SERVO_0, 0);
 317
 318                 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
 319                                     WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
 320                                     0);
 321
 322                 snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
 323                                     WM9090_CP_ENA, 0);
 324                 break;
 325         }
 326
 327         return 0;
 328 }
 329
 330 static const struct snd_kcontrol_new spkmix[] = {
 331 SOC_DAPM_SINGLE("IN1A Switch", WM9090_SPEAKER_MIXER, 6, 1, 0),
 332 SOC_DAPM_SINGLE("IN1B Switch", WM9090_SPEAKER_MIXER, 4, 1, 0),
 333 SOC_DAPM_SINGLE("IN2A Switch", WM9090_SPEAKER_MIXER, 2, 1, 0),
 334 SOC_DAPM_SINGLE("IN2B Switch", WM9090_SPEAKER_MIXER, 0, 1, 0),
 335 };
 336
 337 static const struct snd_kcontrol_new spkout[] = {
 338 SOC_DAPM_SINGLE("Mixer Switch", WM9090_SPKOUT_MIXERS, 4, 1, 0),
 339 };
 340
 341 static const struct snd_kcontrol_new mixoutl[] = {
 342 SOC_DAPM_SINGLE("IN1A Switch", WM9090_OUTPUT_MIXER1, 6, 1, 0),
 343 SOC_DAPM_SINGLE("IN1B Switch", WM9090_OUTPUT_MIXER1, 4, 1, 0),
 344 SOC_DAPM_SINGLE("IN2A Switch", WM9090_OUTPUT_MIXER1, 2, 1, 0),
 345 SOC_DAPM_SINGLE("IN2B Switch", WM9090_OUTPUT_MIXER1, 0, 1, 0),
 346 };
 347
 348 static const struct snd_kcontrol_new mixoutr[] = {
 349 SOC_DAPM_SINGLE("IN1A Switch", WM9090_OUTPUT_MIXER2, 6, 1, 0),
 350 SOC_DAPM_SINGLE("IN1B Switch", WM9090_OUTPUT_MIXER2, 4, 1, 0),
 351 SOC_DAPM_SINGLE("IN2A Switch", WM9090_OUTPUT_MIXER2, 2, 1, 0),
 352 SOC_DAPM_SINGLE("IN2B Switch", WM9090_OUTPUT_MIXER2, 0, 1, 0),
 353 };
 354
 355 static const struct snd_soc_dapm_widget wm9090_dapm_widgets[] = {
 356 SND_SOC_DAPM_INPUT("IN1+"),
 357 SND_SOC_DAPM_INPUT("IN1-"),
 358 SND_SOC_DAPM_INPUT("IN2+"),
 359 SND_SOC_DAPM_INPUT("IN2-"),
 360
 361 SND_SOC_DAPM_SUPPLY("OSC", WM9090_POWER_MANAGEMENT_1, 3, 0, NULL, 0),
 362
 363 SND_SOC_DAPM_PGA("IN1A PGA", WM9090_POWER_MANAGEMENT_2, 7, 0, NULL, 0),
 364 SND_SOC_DAPM_PGA("IN1B PGA", WM9090_POWER_MANAGEMENT_2, 6, 0, NULL, 0),
 365 SND_SOC_DAPM_PGA("IN2A PGA", WM9090_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
 366 SND_SOC_DAPM_PGA("IN2B PGA", WM9090_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
 367
 368 SND_SOC_DAPM_MIXER("SPKMIX", WM9090_POWER_MANAGEMENT_3, 3, 0,
 369                    spkmix, ARRAY_SIZE(spkmix)),
 370 SND_SOC_DAPM_MIXER("MIXOUTL", WM9090_POWER_MANAGEMENT_3, 5, 0,
 371                    mixoutl, ARRAY_SIZE(mixoutl)),
 372 SND_SOC_DAPM_MIXER("MIXOUTR", WM9090_POWER_MANAGEMENT_3, 4, 0,
 373                    mixoutr, ARRAY_SIZE(mixoutr)),
 374
 375 SND_SOC_DAPM_PGA_E("HP PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
 376                    hp_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 377
 378 SND_SOC_DAPM_PGA("SPKPGA", WM9090_POWER_MANAGEMENT_3, 8, 0, NULL, 0),
 379 SND_SOC_DAPM_MIXER("SPKOUT", WM9090_POWER_MANAGEMENT_1, 12, 0,
 380                    spkout, ARRAY_SIZE(spkout)),
 381
 382 SND_SOC_DAPM_OUTPUT("HPR"),
 383 SND_SOC_DAPM_OUTPUT("HPL"),
 384 SND_SOC_DAPM_OUTPUT("Speaker"),
 385 };
 386
 387 static const struct snd_soc_dapm_route audio_map[] = {
 388         { "IN1A PGA", NULL, "IN1+" },
 389         { "IN2A PGA", NULL, "IN2+" },
 390
 391         { "SPKMIX", "IN1A Switch", "IN1A PGA" },
 392         { "SPKMIX", "IN2A Switch", "IN2A PGA" },
 393
 394         { "MIXOUTL", "IN1A Switch", "IN1A PGA" },
 395         { "MIXOUTL", "IN2A Switch", "IN2A PGA" },
 396
 397         { "MIXOUTR", "IN1A Switch", "IN1A PGA" },
 398         { "MIXOUTR", "IN2A Switch", "IN2A PGA" },
 399
 400         { "HP PGA", NULL, "OSC" },
 401         { "HP PGA", NULL, "MIXOUTL" },
 402         { "HP PGA", NULL, "MIXOUTR" },
 403
 404         { "HPL", NULL, "HP PGA" },
 405         { "HPR", NULL, "HP PGA" },
 406
 407         { "SPKPGA", NULL, "OSC" },
 408         { "SPKPGA", NULL, "SPKMIX" },
 409
 410         { "SPKOUT", "Mixer Switch", "SPKPGA" },
 411
 412         { "Speaker", NULL, "SPKOUT" },
 413 };
 414
 415 static const struct snd_soc_dapm_route audio_map_in1_se[] = {
 416         { "IN1B PGA", NULL, "IN1-" },
 417
 418         { "SPKMIX", "IN1B Switch", "IN1B PGA" },
 419         { "MIXOUTL", "IN1B Switch", "IN1B PGA" },
 420         { "MIXOUTR", "IN1B Switch", "IN1B PGA" },
 421 };
 422
 423 static const struct snd_soc_dapm_route audio_map_in1_diff[] = {
 424         { "IN1A PGA", NULL, "IN1-" },
 425 };
 426
 427 static const struct snd_soc_dapm_route audio_map_in2_se[] = {
 428         { "IN2B PGA", NULL, "IN2-" },
 429
 430         { "SPKMIX", "IN2B Switch", "IN2B PGA" },
 431         { "MIXOUTL", "IN2B Switch", "IN2B PGA" },
 432         { "MIXOUTR", "IN2B Switch", "IN2B PGA" },
 433 };
 434
 435 static const struct snd_soc_dapm_route audio_map_in2_diff[] = {
 436         { "IN2A PGA", NULL, "IN2-" },
 437 };
 438
 439 static int wm9090_add_controls(struct snd_soc_codec *codec)
 440 {
 441         struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
 442         struct snd_soc_dapm_context *dapm = &codec->dapm;
 443         int i;
 444
 445         snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets,
 446                                   ARRAY_SIZE(wm9090_dapm_widgets));
 447
 448         snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
 449
 450         snd_soc_add_controls(codec, wm9090_controls,
 451                              ARRAY_SIZE(wm9090_controls));
 452
 453         if (wm9090->pdata.lin1_diff) {
 454                 snd_soc_dapm_add_routes(dapm, audio_map_in1_diff,
 455                                         ARRAY_SIZE(audio_map_in1_diff));
 456         } else {
 457                 snd_soc_dapm_add_routes(dapm, audio_map_in1_se,
 458                                         ARRAY_SIZE(audio_map_in1_se));
 459                 snd_soc_add_controls(codec, wm9090_in1_se_controls,
 460                                      ARRAY_SIZE(wm9090_in1_se_controls));
 461         }
 462
 463         if (wm9090->pdata.lin2_diff) {
 464                 snd_soc_dapm_add_routes(dapm, audio_map_in2_diff,
 465                                         ARRAY_SIZE(audio_map_in2_diff));
 466         } else {
 467                 snd_soc_dapm_add_routes(dapm, audio_map_in2_se,
 468                                         ARRAY_SIZE(audio_map_in2_se));
 469                 snd_soc_add_controls(codec, wm9090_in2_se_controls,
 470                                      ARRAY_SIZE(wm9090_in2_se_controls));
 471         }
 472
 473         if (wm9090->pdata.agc_ena) {
 474                 for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++)
 475                         snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i,
 476                                       wm9090->pdata.agc[i]);
 477                 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
 478                                     WM9090_AGC_ENA, WM9090_AGC_ENA);
 479         } else {
 480                 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
 481                                     WM9090_AGC_ENA, 0);
 482         }
 483
 484         return 0;
 485
 486 }
 487
 488 /*
 489  * The machine driver should call this from their set_bias_level; if there
 490  * isn't one then this can just be set as the set_bias_level function.
 491  */
 492 static int wm9090_set_bias_level(struct snd_soc_codec *codec,
 493                                  enum snd_soc_bias_level level)
 494 {
 495         u16 *reg_cache = codec->reg_cache;
 496         int i, ret;
 497
 498         switch (level) {
 499         case SND_SOC_BIAS_ON:
 500                 break;
 501
 502         case SND_SOC_BIAS_PREPARE:
 503                 snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA,
 504                                     WM9090_VMID_ENA);
 505                 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
 506                                     WM9090_BIAS_ENA |
 507                                     WM9090_VMID_RES_MASK,
 508                                     WM9090_BIAS_ENA |
 509                                     1 << WM9090_VMID_RES_SHIFT);
 510                 msleep(1);  /* Probably an overestimate */
 511                 break;
 512
 513         case SND_SOC_BIAS_STANDBY:
 514                 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
 515                         /* Restore the register cache */
 516                         snd_soc_cache_sync(codec);
 517                 }
 518
 519                 /* We keep VMID off during standby since the combination of
 520                  * ground referenced outputs and class D speaker mean that
 521                  * latency is not an issue.
 522                  */
 523                 snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
 524                                     WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0);
 525                 snd_soc_update_bits(codec, WM9090_ANTIPOP2,
 526                                     WM9090_VMID_ENA, 0);
 527                 break;
 528
 529         case SND_SOC_BIAS_OFF:
 530                 break;
 531         }
 532
 533         codec->dapm.bias_level = level;
 534
 535         return 0;
 536 }
 537
 538 static int wm9090_probe(struct snd_soc_codec *codec)
 539 {
 540         int ret;
 541
 542         ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
 543         if (ret != 0) {
 544                 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
 545                 return ret;
 546         }
 547
 548         ret = snd_soc_read(codec, WM9090_SOFTWARE_RESET);
 549         if (ret < 0)
 550                 return ret;
 551         if (ret != wm9090_reg_defaults[WM9090_SOFTWARE_RESET]) {
 552                 dev_err(codec->dev, "Device is not a WM9090, ID=%x\n", ret);
 553                 return -EINVAL;
 554         }
 555
 556         ret = snd_soc_write(codec, WM9090_SOFTWARE_RESET, 0);
 557         if (ret < 0)
 558                 return ret;
 559
 560         /* Configure some defaults; they will be written out when we
 561          * bring the bias up.
 562          */
 563         snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME,
 564                             WM9090_IN1_VU | WM9090_IN1A_ZC,
 565                             WM9090_IN1_VU | WM9090_IN1A_ZC);
 566         snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME,
 567                             WM9090_IN1_VU | WM9090_IN1B_ZC,
 568                             WM9090_IN1_VU | WM9090_IN1B_ZC);
 569         snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME,
 570                             WM9090_IN2_VU | WM9090_IN2A_ZC,
 571                             WM9090_IN2_VU | WM9090_IN2A_ZC);
 572         snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME,
 573                             WM9090_IN2_VU | WM9090_IN2B_ZC,
 574                             WM9090_IN2_VU | WM9090_IN2B_ZC);
 575         snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT,
 576                             WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC,
 577                             WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC);
 578         snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME,
 579                             WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC,
 580                             WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC);
 581         snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME,
 582                             WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC,
 583                             WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC);
 584
 585         snd_soc_update_bits(codec, WM9090_CLOCKING_1,
 586                             WM9090_TOCLK_ENA, WM9090_TOCLK_ENA);
 587
 588         wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 589
 590         wm9090_add_controls(codec);
 591
 592         return 0;
 593 }
 594
 595 #ifdef CONFIG_PM
 596 static int wm9090_suspend(struct snd_soc_codec *codec)
 597 {
 598         wm9090_set_bias_level(codec, SND_SOC_BIAS_OFF);
 599
 600         return 0;
 601 }
 602
 603 static int wm9090_resume(struct snd_soc_codec *codec)
 604 {
 605         wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 606
 607         return 0;
 608 }
 609 #else
 610 #define wm9090_suspend NULL
 611 #define wm9090_resume NULL
 612 #endif
 613
 614 static int wm9090_remove(struct snd_soc_codec *codec)
 615 {
 616         wm9090_set_bias_level(codec, SND_SOC_BIAS_OFF);
 617
 618         return 0;
 619 }
 620
 621 static struct snd_soc_codec_driver soc_codec_dev_wm9090 = {
 622         .probe =        wm9090_probe,
 623         .remove =       wm9090_remove,
 624         .suspend =      wm9090_suspend,
 625         .resume =       wm9090_resume,
 626         .set_bias_level = wm9090_set_bias_level,
 627         .reg_cache_size = (WM9090_MAX_REGISTER + 1),
 628         .reg_word_size = sizeof(u16),
 629         .reg_cache_default = wm9090_reg_defaults,
 630         .volatile_register = wm9090_volatile,
 631 };
 632
 633 static int wm9090_i2c_probe(struct i2c_client *i2c,
 634                             const struct i2c_device_id *id)
 635 {
 636         struct wm9090_priv *wm9090;
 637         int ret;
 638
 639         wm9090 = devm_kzalloc(&i2c->dev, sizeof(*wm9090), GFP_KERNEL);
 640         if (wm9090 == NULL) {
 641                 dev_err(&i2c->dev, "Can not allocate memory\n");
 642                 return -ENOMEM;
 643         }
 644
 645         if (i2c->dev.platform_data)
 646                 memcpy(&wm9090->pdata, i2c->dev.platform_data,
 647                        sizeof(wm9090->pdata));
 648
 649         i2c_set_clientdata(i2c, wm9090);
 650
 651         ret =  snd_soc_register_codec(&i2c->dev,
 652                         &soc_codec_dev_wm9090,  NULL, 0);
 653         return ret;
 654 }
 655
 656 static int __devexit wm9090_i2c_remove(struct i2c_client *i2c)
 657 {
 658         struct wm9090_priv *wm9090 = i2c_get_clientdata(i2c);
 659
 660         snd_soc_unregister_codec(&i2c->dev);
 661
 662         return 0;
 663 }
 664
 665 static const struct i2c_device_id wm9090_id[] = {
 666         { "wm9090", 0 },
 667         { "wm9093", 0 },
 668         { }
 669 };
 670 MODULE_DEVICE_TABLE(i2c, wm9090_id);
 671
 672 static struct i2c_driver wm9090_i2c_driver = {
 673         .driver = {
 674                 .name = "wm9090",
 675                 .owner = THIS_MODULE,
 676         },
 677         .probe = wm9090_i2c_probe,
 678         .remove = __devexit_p(wm9090_i2c_remove),
 679         .id_table = wm9090_id,
 680 };
 681
 682 static int __init wm9090_init(void)
 683 {
 684         return i2c_add_driver(&wm9090_i2c_driver);
 685 }
 686 module_init(wm9090_init);
 687
 688 static void __exit wm9090_exit(void)
 689 {
 690         i2c_del_driver(&wm9090_i2c_driver);
 691 }
 692 module_exit(wm9090_exit);
 693
 694 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 695 MODULE_DESCRIPTION("WM9090 ASoC driver");
 696 MODULE_LICENSE("GPL");