ASoC: simple-card: simplify code
[deliverable/linux.git] / sound / soc / soc-io.c
1 /*
2 * soc-io.c -- ASoC register I/O helpers
3 *
4 * Copyright 2009-2011 Wolfson Microelectronics PLC.
5 *
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 */
13
14 #include <linux/i2c.h>
15 #include <linux/spi/spi.h>
16 #include <linux/regmap.h>
17 #include <linux/export.h>
18 #include <sound/soc.h>
19
20 #include <trace/events/asoc.h>
21
22 #ifdef CONFIG_REGMAP
23 static int hw_write(struct snd_soc_codec *codec, unsigned int reg,
24 unsigned int value)
25 {
26 int ret;
27
28 if (!snd_soc_codec_volatile_register(codec, reg) &&
29 reg < codec->driver->reg_cache_size &&
30 !codec->cache_bypass) {
31 ret = snd_soc_cache_write(codec, reg, value);
32 if (ret < 0)
33 return -1;
34 }
35
36 if (codec->cache_only) {
37 codec->cache_sync = 1;
38 return 0;
39 }
40
41 return regmap_write(codec->control_data, reg, value);
42 }
43
44 static unsigned int hw_read(struct snd_soc_codec *codec, unsigned int reg)
45 {
46 int ret;
47 unsigned int val;
48
49 if (reg >= codec->driver->reg_cache_size ||
50 snd_soc_codec_volatile_register(codec, reg) ||
51 codec->cache_bypass) {
52 if (codec->cache_only)
53 return -1;
54
55 ret = regmap_read(codec->control_data, reg, &val);
56 if (ret == 0)
57 return val;
58 else
59 return -1;
60 }
61
62 ret = snd_soc_cache_read(codec, reg, &val);
63 if (ret < 0)
64 return -1;
65 return val;
66 }
67
68 /**
69 * snd_soc_codec_set_cache_io: Set up standard I/O functions.
70 *
71 * @codec: CODEC to configure.
72 * @addr_bits: Number of bits of register address data.
73 * @data_bits: Number of bits of data per register.
74 * @control: Control bus used.
75 *
76 * Register formats are frequently shared between many I2C and SPI
77 * devices. In order to promote code reuse the ASoC core provides
78 * some standard implementations of CODEC read and write operations
79 * which can be set up using this function.
80 *
81 * The caller is responsible for allocating and initialising the
82 * actual cache.
83 *
84 * Note that at present this code cannot be used by CODECs with
85 * volatile registers.
86 */
87 int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
88 int addr_bits, int data_bits,
89 enum snd_soc_control_type control)
90 {
91 struct regmap_config config;
92 int ret;
93
94 memset(&config, 0, sizeof(config));
95 codec->write = hw_write;
96 codec->read = hw_read;
97
98 config.reg_bits = addr_bits;
99 config.val_bits = data_bits;
100
101 switch (control) {
102 #if IS_ENABLED(CONFIG_REGMAP_I2C)
103 case SND_SOC_I2C:
104 codec->control_data = regmap_init_i2c(to_i2c_client(codec->dev),
105 &config);
106 break;
107 #endif
108
109 #if IS_ENABLED(CONFIG_REGMAP_SPI)
110 case SND_SOC_SPI:
111 codec->control_data = regmap_init_spi(to_spi_device(codec->dev),
112 &config);
113 break;
114 #endif
115
116 case SND_SOC_REGMAP:
117 /* Device has made its own regmap arrangements */
118 codec->using_regmap = true;
119 if (!codec->control_data)
120 codec->control_data = dev_get_regmap(codec->dev, NULL);
121
122 if (codec->control_data) {
123 ret = regmap_get_val_bytes(codec->control_data);
124 /* Errors are legitimate for non-integer byte
125 * multiples */
126 if (ret > 0)
127 codec->val_bytes = ret;
128 }
129 break;
130
131 default:
132 return -EINVAL;
133 }
134
135 return PTR_ERR_OR_ZERO(codec->control_data);
136 }
137 EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
138 #else
139 int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
140 int addr_bits, int data_bits,
141 enum snd_soc_control_type control)
142 {
143 return -ENOTSUPP;
144 }
145 EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
146 #endif
This page took 0.052074 seconds and 5 git commands to generate.