Thu Jul 23 14:49:27 1998 Dawn Perchik * remote-mips.c (remote_mips_insert_hw_breakpoint, remote_mips_remove_hw_breakpoint): New functions for hardware breakpoints on LSI targets. * config/mips/tm-embed.h (target_remove_hw_breakpoint, target_insert_hw_breakpoint): Define to call remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint, respectively. start-sanitize-sky Thu Jul 23 13:00:28 1998 Ian Carmichael * txvu-tdep.c: (VU0_MEM0_WINDOW_START, VU1_MEM0_WINDOW_START) Changed to use addresses in kseg1 range. end-sanitize-sky 1998-07-21 Fernando Nasser * source.c (print_source_lines): Print "No such file or directory" just once. (directory_command): same as above; resets if user issues dir. Sun Jul 19 02:11:45 1998 Martin M. Hunt * symtab.c (decode_line_2): Instead of printing a prompt and calling command_line_input() without a prompt, just call it with the proper args. This makes the GUI work too. Fri Jul 17 9:26:50 1998 Ron Unrau * blockframe.c (find_pc_sect_partial_function): allow for the possi- bility of multiple symbols at the same address when finding high. * breakpoint.c (resolve_sal_pc): if the function based section lookup fails, try getting the section from the minimal symbol table. * parse.c (write_exp_msymbol): use symbol_overlayed_address to get the LMA of a minimal symbol if unmapped. * symtab.c (find_line_symtab): change interface to return symtab containing the best linetable found. (decode_line_1): use find_line_symtab to set val.symtab. This should improve support for source files with multiple symtabs. start-sanitize-sky * tm-txvu.h: include tm-mips64.h instead of starting from scratch. end-sanitize-sky Wed Jul 15 11:51:33 1998 Keith Seitz * main.c (main): Fix violations of GNU coding standard. * breakpoint.c: Export delete_command. * infcmd.c: Export continue_command, stepi_command, and nexti_command. * Makefile.in: Add target for v850ice.o. * configure.tgt: Add cygwin32 dependencies for v850 ice. Wed Jul 15 10:58:29 1998 Nick Clifton * tracepoint.c (set_raw_tracepoint): Cope with symbols that do not have an associated directory. Mon Jul 13 15:21:04 1998 Mark Alexander * utils.c (puts_debug): Display non-printable characters in hex instead of octal. Thu Jul 9 16:16:47 1998 Jeffrey A Law (law@cygnus.com) * mn10300-tdep.c (mn10300_generic_register_names): New variable. (set_machine_hook): New function. Copy the appropriate register names into reg_names. (_initialize_mn10300_tdep): Set up to call set_machine_hook. * tm-mn10300 (NUM_REGS): Bump to 32. (REGISTER_NAMES): Updated accordingly. start-sanitize-am33 * mn10300-tdep.c (am33_register_names): New variable. (mn10300_analyze_prologue): Handle regs saved by am33 prologues. * tm-mn10300.h (E0_REGNUM): Define. end-sanitize-am33 Tue Jul 7 7:40:13 1998 Ron Unrau * symtab.c (find_pc_sect_psymbol): allow case where textlow is 0 Thu Jul 2 15:57:58 1998 Frank Ch. Eigler * breakpoint.c (resolve_sal_pc): Accept absence of innermost Lexical block for breakpoint resolution. Thu Jul 2 10:22:00 1998 Dawn Perchik * mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug section, but just don't add a 2nd minimal symbol if this is an .mdebug section in an ELF file. 1998-07-01 Jim Blandy * Makefile.in (ax-general.o): Depend on $(defs_h) too. (ax_h): Bother to define this. Mon Jun 29 19:01:18 1998 Jim Wilson * gnu-regex.c (re_comp): Add cast to char * before gettext calls. Sun Jun 28 11:35:48 1998 Peter Schauer Improve support for SunPro F77. * dbxread.c (end_psymtab, process_one_symbol): Handle minimal symbols with trailing underscore names. * minsyms.c (find_stab_function_addr): Ditto. * dbxread.c (process_one_symbol): Ignore N_ALIAS for now. * partial-stab.h (case N_ALIAS): Ditto. * stabsread.c (read_sun_builtin_type): Handle boolean types. Fri Jun 26 14:03:01 1998 Keith Seitz * symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE, TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by new search_symbols. Add prototype for search_symbols and free_search_symbols. * symtab.c (list_symbols): Rewrite to use new search_symbols. (file_matches): New helper function for search_symbols. (free_search_symbols): New function which frees data returned from search_symbols. (print_symbol_info): New helper function which prints info about a matched symbol to stdout. Extracted from old list_symbols. (print_msymbol_info): New helper function which prints info about a matched msymbol to stdout. Extracted from old list_symbols. (symtab_symbol_info): Extracted from old list_symbols. (variables_info): Use symtab_symbol_info. (functions_info): Use symtab_symbol_info. (types_info): Use symtab_symbol_info. (rbreak_command): Rewrite to use new search_symbols. Thu Jun 25 22:38:32 1998 Frank Ch. Eigler * mips-tdep.c (mips_push_arguments): Use 128-bit stack frame alignment for inferior calls. >>>>>>> 1.4505 Wed Jun 24 23:17:12 1998 Mark Alexander * mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation of jsr target address. Tue Jun 23 19:37:46 1998 Mark Alexander * config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL): Don't zero upper byte of address. Tue Jun 23 17:32:26 1998 Michael Snyder * rs6000-tdep.c (pop_dummy_frame): use memcpy. (push_arguments): use memset. (various other places): fix up indentation and long lines. Tue Jun 23 11:58:35 1998 Jason Molenda (crash@bugshack.cygnus.com) * configure.in: s/lXext/-lXext/ for Jillian's change. Tue Jun 23 11:14:04 1998 Michael Snyder * source.c (find_source_lines): fix indentation. * config/mips/tm-irix5.h: Modify to work better on irix 6, by making FP registers 8 bytes instead of 4. REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine. REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine. * irix5-nat.c (fetch_core_registers): read 8 bytes per FP register. * mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish targets with 8-byte FP registers (don't use TARGET_MIPS64). (STACK_ARGSIZE): new macro, how much space is taken up on the stack for each function argument (don't use TARGET_MIPS64). (mips_push_arguments): modify logic to work better on Irix 6 (n32 ABI). Tue Jun 23 12:29:53 1998 Jillian Ye * configure.in: Add -lXext to mips_extra_libs * configure: Regenerated. Sun Jun 21 09:31:12 1998 Ron Unrau (runrau@cygnus.com) * symtab.c (find_line_pc): assumed that a PC of 0 is illegal. Changed to pass PC as arg and return 1 if valid (0 otherwise). symtab.h: change prototype to match symtab.c (find_line_pc_range): use new interface breakpoint.c (resolve_sal_pc): ditto gdbtk.c (gdb_set_bp): ditto Wed Jun 17 15:50:00 1998 Ron Unrau (runrau@cygnus.com) * parse.c (target_map_name_to_register): Check target specific aliases *first* so that it can over-ride architectural names Wed Jun 17 17:13:38 1998 Said Ziouani (saidz@park-street.cygnus.com) * remote-sds.c (sds_start_remote): Fix printf call. Tue Jun 16 16:32:08 1998 Mark Alexander * mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer crash when in "start". Tue Jun 16 14:38:40 1998 Ron Unrau (runrau@cygnus.com) * dbxread.c: reset function_start_offset after a finishing N_FUN is seen. * remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override target vectors as needed. Sun Jun 14 08:46:25 1998 Ron Unrau (runrau@cygnus.com) * partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass CUR_SYMBOL_VALUE as CORE_ADDR instead of long * buildsym.[ch]: export pending_blocks list Sat Jun 13 13:02:32 1998 Dawn Perchik (dawn@cygnus.com) * remote.c : Fix remote help string to match that of help.exp. Fri Jun 12 14:22:55 1998 Jason Molenda (crash@bugshack.cygnus.com) * configure.in (LIBS): Add -lw to the list of libraries if needed. Thu Jun 11 15:05:10 1998 Jason Molenda (crash@bugshack.cygnus.com) * btowc.c: Removed. * configure.in: Don't see if we need to replace btowc(). * Makefile.in: Don't include LIBOBJS. * configure: Regenerated. * gnu-regex.c (regex_compile): Only support i18n [:foo:] if we have btowc(). Wed Jun 10 15:39:14 1998 Stu Grossman * c-exp.y: Fix problems with parsing "'foo.bar'::func". Some languages allow symbols with dots. * gdbtypes.c (check_stub_method): Cosmetic. Use more descriptive names for parameters. start-sanitize-java * jv-exp.y: Parser now accepts primitive types. * (parse_number): Use correct ifdef for scanf long double support. * jv-lang.c (java_array_type): Initial cut at array support. end-sanitize-java * language.c language.h (set_language): Now returns previous language. * symtab.c (find_methods): Make static. Cosmetic changes, including indentation, and adding descriptive comments. Move local variable defs into the block they are used in. * Don't call check_stub_method any more. Use gdb_mangle_name to generate the full method name. find_method doesn't need all the other goobldegook that check_stub_method does. * (gdb_mangle_name): Use more descriptive names for parameters. Fix comment. start-sanitize-java * (lookup_partial_symbol lookup_block_symbol): Check for java to ensure we can find mangled names. end-sanitize-java * (decode_line_1): Move local variable defs into the block they are used in. (Improves code readability.) Wed Jun 10 18:04:35 1998 Frank Ch. Eigler * gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for all-positive enum. (create_set_type): Ditto for all-positive set values. * values.c (unpack_field_as_long): Check for typedef in struct field unpacking. Wed Jun 10 14:06:05 1998 Jason Molenda (crash@bugshack.cygnus.com) * configure.in: Add some tests for gnu-regex.c's benefit. See if btowc() function is provided in C library. * configure, config.in: Regenerated. * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c if necessary. * btowc.c: New file. * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris' benefit. Drop namespace preserving defines for now. Wed Jun 10 11:53:42 1998 Jason Molenda (crash@bugshack.cygnus.com) * gnu-regex.c: Include "gnu-regex.h", not "regex.h". Wed Jun 10 11:34:07 1998 Jason Molenda (crash@bugshack.cygnus.com) * gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license to stay consistent with the rest of GDB. Wed Jun 10 11:27:39 1998 Jason Molenda (crash@bugshack.cygnus.com) * gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions. Wed Jun 10 10:58:18 1998 Michael Snyder * printcmd.c (disassemble_command): move overlay mapping code "up" into find_pc_partial_function. * blockframe.c (find_pc_partial_function): adjust start address and end address for overlays (mapped vs. unmapped addresses), so that all callers of this function may benefit. * m32r-tdep.c (m32r_skip_prologue): adjust indentation. Mon Jun 8 16:08:10 1998 Ron Unrau * objfiles.c (add_to_objfile_sections): All targets to define TARGET_KEEP_SECTION to permit them to retain bfd sections that GDB would otherwise have discarded. Fri Jun 5 13:56:19 1998 Doug Evans * dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab. Thu Jun 4 18:35:04 1998 Stan Shebs * remote.c (init_extended_remote_ops): Make extended_remote_ops by copying from remote_ops, move it and init_remote_ops to usual place at end of file, remove "void" from arg lists. Thu Jun 4 17:51:06 1998 Mark Alexander * sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy on bi-endian machines. (sparc_extract_return_value): Handle values smaller than int on machines with little-endian data. (sparc_target_architecture_hook): Set bi_endian flag. Thu Jun 4 12:14:48 1998 Michael Snyder * printcmd.c (disassemble_command): Fix off-by-one error for disassembling functions in unmapped overlay sections. Thu Jun 4 10:15:03 1998 Elena Zannoni * remote.c: merged. - Jim Blandy (print_packet, remote_packet_command): New functions. (_initialize_remote): Register the remote-packet command. - David Taylor (_initialize_remote): remote-compare is now compare-sections. - Elena Zannoni (remote_compare_command): added warning, issued in case of mismatch only. Thu Jun 4 08:25:38 1998 Michael Snyder * remote.c (remote_compare_command): New function, new command. Compare object file binary image with corresponding memory on remote target. Report differences. Tue Jun 2 19:05:04 1998 Mark Alexander * sparc-tdep.c (sparc_target_architecture_hook): Set target byte order only when it's selectable. Tue Jun 2 02:01:56 1998 Mark Alexander * sparc-tdep.c (sparc_target_architecture_hook): New function to set endianness based on machine type. (_initialize_sparc_tdep): Initialize target_architecture_hook. (sparc_print_register_hook): Print PSR and FPSR in fancy format on 32-bit machines. * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to call sparc_print_register_hook instead of using inline code. * config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove. Thu May 28 17:19:14 1998 Keith Seitz * main.c (main): Check for NULL from getenv on CYGWIN32. Thu May 28 09:41:44 1998 Nick Clifton * monitor.c (monitor_vsprintf): Handle %%. Patch courtesy of Felix Lee (flee@cygnus.com) Thu May 28 00:27:35 1998 Peter Schauer * mips-tdep.c (mips_push_dummy_frame): Fix calculation of PROC_REG_OFFSET and PROC_FREG_OFFSET. Mon Apr 27 14:37:49 1998 Andrew Cagney * config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and FP_RAW_REGNUM use the same register location. * v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of FP_REGNUM. (v850_frame_chain): Ditto. * config/v850/tm-v850.h (REGISTER_NAMES): Add "fp". (NUM_REGS): Update. (FP_REGNUM): Update. (FP_RAW_REGNUM): Define. Wed May 27 14:22:31 1998 Keith Seitz * main.c (main): Convert the path returned from getenv to a posix path on cygwin32 hosts. Mon May 25 13:31:27 1998 Keith Seitz * remote.c (remote_open_1): If an error occurs starting the remote, pop the target AND return. Sat May 23 02:23:09 1998 Peter Schauer * dwarf2read.c (read_subroutine_type): Set TYPE_FLAG_PROTOTYPED on C++ functions. * valops.c (value_arg_coerce): Add new argument to indicate whether the function has a prototype, handle integer and float promotions accordingly. (call_function_by_hand): Always call value_arg_coerce, pass down prototype information. Fri May 22 10:56:36 1998 John Metzler * remote.c (_initialize_remote): Typo extended__remote Thu May 21 13:14:25 1998 John Metzler * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment. (_initialize_gnu_nat): Call new init * mac-nat.c (init_child_ops): Ditto. (_initialize_mac_nat): Ditto. * monitor.c (init_base_monitor_ops): Ditto. (_initialize_remote_monitors): Ditto. * ppc-bdm.c (init_bdm_ppc_ops): Ditto. (_initialize_bdm_ppc): Ditto. * remote-adapt.c (init_adapt_ops): Ditto. (_initialize_remote_adapt): Ditto. * remote-array.c (init_array_ops): Ditto. (_initialize_array): Ditto. * remote-bug (init_bug_ops): Ditto. (_initialize_remote_bug): Ditto. * remote-e7000.c (init_e7000_ops): Ditto. (_initialize_remote_e7000): Ditto. * remote-eb.c (init_eb_ops): Ditto. (_initialize_remote_eb): Ditto. * remote-es.c (init_es1800_ops): Ditto. (init_es1800_child_ops): Ditto. (_initialize_es1800): Ditto. * remote-hms.c (init_hms_ops): Ditto. (_initialize_remote_hms): Ditto. * remote-mm.c (init_mm_ops): Ditto. (_initialize_remote_mm): Ditto. * remote-nindy.c (init_nindy_ops): Ditto. (_initialize_nindy): Ditto. * remote_nrom.c (init_nrom_ops): Ditto. (_initialize_remote_nrom): Ditto. * remote-os9k (init_rombug_ops): Ditto. (_initialize_remote_os9k): Ditto. * remote-rdi.c (init_rdi_ops): Ditto. (_initialize_remote_rdi): Ditto. * remote-rdp.c (init_remote_rdp_ops): Ditto. (_initialize_remote_rdp): Ditto. * remote-sds.c (init_sds_ops): Ditto. (_initialize_remote_sds): Ditto. * remote-sim.c (init_gdbsim_ops): Ditto. (_initialize_remote_sim): Ditto. * remote-st.c (init_st2000_ops): Ditto. (_initialize_remote_st2000): Ditto. * remote-udi.c (init_udi_ops): Ditto. (_initialize_remote_udi): Ditto. * remote-vx.c (init_vx_ops): Ditto. (init_vx_run_ops): Ditto. (_initialize_vx): Ditto. * remote.c (init_remote_ops): Ditto. (init_extended_remote_ops): Ditto. (_initialize_remote): Ditto. * sparcl-tdep.c (init_sparclite_ops): Ditto. (_initialize_sparcl_tdep): Ditto. * v850ice.c (init_850ice_ops): Ditto. (_initialize_v850ice): Ditto. * win32-nat.c: (init_child_ops): Ditto. (_initialize_inftarg): Ditto. 1998-05-21 Jim Blandy * ax-gdb.c (const_var_ref): Don't handle function names. I don't want to implement all the "usual unary conversion" rules for constants. (gen_usual_unary): Turn "function" values into "pointer to function" values, in accordance with ANSI. (gen_deref): Don't do the usual unary conversions here. Let the caller do it. Note that dereferencing a function pointer yields a function designator, which we call an rvalue, not an lvalue. (gen_address_of): Handle functions specially. (gen_struct_ref): Perform the usual unary conversions before calling gen_deref. (gen_expr): In case for the prefix '*' operator, call gen_usual_unary manually. Wed May 20 15:29:41 1998 Gavin Koch * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE. * mips/tm-tx39l.h: Same. Wed May 20 10:12:11 1998 John Metzler * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os. Split out as separate function called by skip prologue and scan prologue. new formula handles optimization in which the prologue is interleaved with the body of the function. Also recognizes new variations of prologue encoding. Use of frame pointer is essential to debugging, -fno-omit-frame-pointer (m32r_skip_prologue): Call decode prologue, ignore line info (m32r_scan_prologue): Call decode prologue, ignore line info. Tue May 19 17:23:54 1998 John Metzler * w89k-rom.c (_initialize_w89k): Call new init function (init_w89k_cmds): Convert to dynamic initialization of monitor_ops data structure for forward compatability with additions to the data structure. * dbug-rom.c (_initialize_dbug_rom): ditto (init_dbug_cmds): ditto * m32r-rom.c (_initialize_m32r_rom): ditto (init_m32r_cmds): ditto Tue May 19 14:54:11 1998 Michael Snyder * tracepoint.c (memrange_cmp): use const void * args to avoid ANSI compiler warnings. 1998-05-19 Jim Blandy * ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field, gen_bitfield_ref, gen_expr): Call error, not abort. * ax-general.c (read_const, generic_ext, ax_trace_quick, ax_label, ax_const_d, ax_reg, ax_print): Same. * tracepoint.c: Remove the $(...) syntax for memranges. (validate_actionline, encode_actions, trace_dump_command): Remove clauses for the $(...) syntax. (parse_and_eval_memrange): Function deleted. (_initialize_tracepoint): Update function description. * gdbtk.c (struct wrapped_call_objs): Change the `func' member to be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector of objects as arguments. Change the object vector to be const, since that's what all the users of this structure seem to expect. (call_obj_wrapper): Cast clientData properly before storing it in the wrapped_args structure. * ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a subcommand of "maintenance", as it should have been from the beginning. #include "gdbcmd.h", to get the declaration for maintenancelist. * Makefile.in: Document that dependency. Tue May 19 12:00:58 1998 Elena Zannoni * tracepoint.c (get_tracepoint_by_number): new function, to access traceframe_number for use of the GUI. * tracepoint.h: added prototype for get_traceframe_number. Mon May 18 13:34:27 1998 Keith Seitz * dbxread.c (process_one_symbol): If block addresses are relative to function start addresses, reset function_start_address whenever a new source file is seen. Mon May 18 13:04:27 1998 Michael Snyder * tracepoint.c (get_tracepoint_by_number): make sure to advance arg pointer even if we fail to parse a useful number. Otherwise, since this function is called in a loop, it may loop forever! Also change strtol call to allow arbitrary radix. (map_args_over_tracepoints (and other places)): add QUIT; call to loop, to allow breakout using control-C. Not all loops were analyzed to make sure they could terminate cleanly, but even terminating with a messed-up tracepoint list would be better than not terminating at all! (tdump_command): check to see if we're connected to a trace- capable target (currently only "remote") before doing anything else. start-sanitize-d30v Sat May 16 22:21:48 1998 Frank Ch. Eigler * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into frame struct before extracting saved register offsets. end-sanitize-d30v Fri May 15 22:47:45 1998 Michael Snyder * tracepoint.c (encode_actions): fix typo in printf format string. 1998-05-15 Jim Blandy Implement a few more tracing operators: ^ | & ~ ! * ax-gdb.c (gen_integral_promotions, gen_logical_not, gen_complement): New functions. (gen_binop): New argument MAY_CARRY, indicating whether we need to correct the upper bits of the value after performing the operation. Callers changed. (gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and BINOP_BITWISE_XOR here as well, by calling gen_binop. Handle UNOP_LOGICAL_NOT, UNOP_COMPLEMENT. * ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary sign extension. * ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary, to match the ANSI C standard better. Callers changed. * ax-gdb.c (gen_traced_pop): Add prototyped declaration. Fri May 15 18:18:38 1998 David Taylor * tracepoint.c (stringify_collections_list): return a collection of strings rather than a single string. (free_actions_list): new function. (encode_actions): process collection of strings returned by stringify_collections_list. 1998-05-15 Jim Blandy * ax-gdb.c (gen_traced_pop): New function. (gen_expr): Call it for comma operator. (gen_trace_for_expr): Call it, instead of writing it out. Add facilities for sending arbitrary packets to the remote agent. There are a bunch of improvements to make (make it generic; handle 'O' replies properly), but I just want to get this onto the branch. * remote.c (print_packet, remote_packet_command): New functions. (_initialize_remote): Register the remote-packet command. Thu May 14 17:52:31 1998 Elena Zannoni * tracepoint.c: move actionline_type definition to tracepoint.h. (validate_actionline): make non static. * tracepoint.h: move actioline_type definition from tracepoint.c. (validate_actionline) moved prototype from tracepoint.c. Thu May 14 11:49:18 1998 David Taylor * tracepoint.c (validate_actionline): add additional error checking, remove some dead code. (encode_actions): additional cleanups. (trace_find_command): remove some dead code. (trace_find_pc_command): ditto. (trace_find_tracepoint_command): ditto. (trace_find_line_command): ditto. (trace_find_range_command): ditto. (trace_find_outside_command): ditto. Thu May 14 5:51:00 1998 Ron Unrau * symtab.c (decode_line_1): set section for "break *" Wed May 13 20:58:02 1998 Mark Alexander * corefile.c (reopen_exec_file): Reopen the exec file if it has changed. Wed May 13 15:22:02 1998 Mark Alexander * sparc-tdep.c (fetch_instruction): New function. (single_step, sparc_init_extra_frame_info, examine_prologue): Use fetch_instruction instead of read_memory_integer to ensure that instructions are always read as big-endian. Wed May 13 14:42:21 1998 Ian Lance Taylor * configure.in: Add AC_FUNC_ALLOCA. * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma alloca. * configure: Rebuild. start-sanitize-java * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New targets. end-sanitize-java Wed May 13 11:19:08 1998 Michael Snyder * tracepoint.c (trace_command): Remove old diagnostic code that was preventing tracepoints from being defined with a full-path filename. Tue May 12 13:17:35 1998 Frank Ch. Eigler * stabsread.c (read_one_struct_field): Check for typedef in type tree before clearing bitfield information. 1998-05-11 Jim Blandy * ax-gdb.c (gen_binop): New function, based on gen_mul, to replace gen_mul and gen_div, and handle `%' op as well. Correctly tests type of arguments. (gen_expr): Factor out common code in binary arithmetic operators. Add support for `%'. (gen_mul, gen_div): Removed. Thu May 7 14:49:38 1998 Bob Manson * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve %o0-%o5 as 64-bit values; compensate for stack bias. (USE_STRUCT_CONVENTION): We only pass pointers to structs if they're larger than 32 bytes. (REG_STRUCT_HAS_ADDR): Ditto. * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp() instead of read_register. If the target is a sparc64 and the frame pointer is odd, compensate for the stack bias. (get_saved_register): Use read_sp(). (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES. (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64, save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers. (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC, CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a dummy frame. (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and the FP is odd, compensate for stack bias. (sparc_store_return_value): Right-justify the return value before writing it to %o0. (sparc_fix_call_dummy): Don't NOP out part of the call dummy on sparc64. (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp, sparc64_write_fp, sp64_push_arguments, sparc64_extract_return_value): New functions to support the sparc64 ABI. * dwarfread.c (handle_producer): Set processing_gcc_compilation to the right version number. * dwarf2read.c (read_file_scope): Assume we're processing GCC2 output. Wed May 6 16:34:03 1998 Jeffrey A Law (law@cygnus.com) * somsolib.c: Include gdb_stat.h. Mon May 4 18:34:01 1998 David Taylor * ax-gdb.c (gen_mul): new function; (gen_div): new function; (gen_expr): add support for * and / operators, call gen_mul and gen_div as appropriate. Mon May 4 16:24:22 1998 Mark Alexander * defs.h (make_run_cleanup): Declare. * solib.c (find_solib): Pass correct number of arguments to make_run_cleanup. Mon May 4 07:08:25 1998 Michael Snyder * tracepoint.c (trace_actions_command): actions command must set step_count to zero (in case previous actions have set it but the new set does not). Sat May 2 09:35:07 1998 Stu Grossman * ocd.h: Add new flags, function codes, and processor types to support new Wiggler capabilities. * (ocd_write_bytes_size): New function to allow atomic writes of memory in sizes larger than a byte. * ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud. Fri May 1 19:51:32 1998 Frank Ch. Eigler * stabsread.c (read_one_struct_field): Do not override supplied bitfield size for a range type value. * gdbtypes.c (create_range_type): For a range with positive lower limit, declare range type as unsigned. Fri May 1 10:58:34 1998 John Metzler * monitor.c: Turn off debug Fri May 1 09:29:56 1998 Peter Schauer * breakpoint.c (delete_command): Skip internal breakpoints when all breakpoints are requested. * stabsread.c (define_symbol): Record parameter types from Sunpro function stabs in the TYPE_FIELDS of the function type. Thu Apr 30 15:59:54 1998 Jason Molenda (crash@bugshack.cygnus.com) * Makefile.in (config-check-targets, config-check-hosts): Removed. 1998-04-30 Paul Eggert * Makefile.in (maintainer-clean): Don't get ahead of yourself and delete Makefile before running `make'. (local-maintainer-clean, do-maintainer-clean): New rules. Wed Apr 29 14:02:59 1998 David Taylor * ax-gdb.c (gen_add): when adding a pointer and an int, use the size of the pointer, not the int (typo) to decide how to extend the result. Wed Apr 29 10:20:40 1998 John Metzler start-sanitize-vr4111 * nec4102rom.c: New file implements ROM monitor adapter for nec-vr4102 board. This board hosts the vr4111 chip. This file required extensions to the monitor_ops structure, hooks for wait filter, new flags. This version does not support more than one breakpoint and resuming after a breakpoint in 16 bit mode is completely disfunctional. end-sanitize-vr4111 * monitor.h: Defined additional hooks for dmpregs, configure_hooks and wait_filter. These additions require that all ROM monitor interfaces be recoded to initialize monitor ops using assignments rather than static structure initialization. Added new bits to flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES. * monitor.c (RDEBUG): Conditional tracing throughout the file. (fromhex): Now recognized upper cse hex digits (monitor_printf_noecho): (monitor_readchar): Tracing interferes with input timing. (monitor_open): Register different memory write functions with dcache_init if MO_HAS_BLOCKWRITES. (flush_monior_dcache): Added as an additional utilty. (monitor-resume): Call continue hook if one has been supplied. (monitor_wait_filter): New function Factored out of monitor wait and used if alternate wait-filter has not been provided. (monitor_wait): call alternate wait filter if provided. Call monitor_dump_regs, a new function factored out from inline code. (monitor_dump_block): A new function used as a utility when monitors must dump several blocks of registers using different commands. (monitor_dump_regs): Call alternate function if provided. Uses new hook in monitor.h. (monitor_write_memory): Engage previouly added hook MO_FILL_USES_ADDR. (monitor_write_even_block): new function supports writing long blocks of 4byte words. (longlongendswap): new internal function (monitor_write_memory_longlongs): new function writes large blocks using command to enter a long long. (monitor_write-memory_block): new Function figures out which block mod to use. (monitor_read_memory): Can now handle dump formats in which the bytes preceeding the requested data is not printed. Tue Apr 28 19:41:33 1998 Tom Tromey * Makefile.in (GDBTKLIBS): New macro. (INSTALLED_LIBS): Include GDBTKLIBS. (CLIBS): Likewise. * configure: Rebuilt. * configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS. (GDBTKLIBS): AC_SUBST. * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' -> `memrange'. * tracepoint.c (memrange_cmp): Fixed typo in function intro. Tue Apr 28 17:41:20 1998 Philippe De Muyter * symfile.c (overlay_auto_command): Add forgotten parameter definitions. (overlay_manual_command, overlay_off_command): Likewise. (overlay_load_command): Likewise. * tracepoint.c (memrange_cmp): Parameters have type void *, not struct memrange *. Tue Apr 28 11:08:25 1998 John Metzler * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds. Mon Apr 27 14:32:21 1998 Mark Alexander * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically, make it work on the simulator. (FIX_CALL_DUMMY): Convert to function call instead of inline code. (sparc_fix_call_dummy): Declare. * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from old FIX_CALL_DUMMY macro, with additional fixes for simulator. (sparc_push_dummy_frame): Set registers differently on simulator to prevent corrupted register window save areas. Mon Apr 27 13:46:40 1998 John Metzler * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds): Convert all static initializations of monitor ops structures to executable initializations in order that additions to the data structure definition can me made without repeating this editing exercise. * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto. * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto. * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto. * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto. * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto. * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto. * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto. * remote-est.c (_initialize_est, init_est_cmds): Ditto. * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto. Mon Apr 27 10:43:04 1998 Jason Molenda (crash@bugshack.cygnus.com) * gdb_string.h (strdup): Don't specify arguments in prototype. Sun Apr 26 07:57:21 1998 Peter Schauer * rs6000-nat.c (vmap_ldinfo): Issue warning instead of error if fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd to check for reference to the same file. * target.c (target_read_string): Handle string transfers at the end of a memory section gracefully. Fri Apr 24 17:18:56 1998 Geoffrey Noer * Makefile.in: enable EXEEXT setting Fri Apr 24 11:53:49 1998 David Taylor * tracepoint.c (add_local_symbols): change type of type from char to int so that type shows up as 'A' or 'L' not 0. start-sanitize-r5900 Fri Apr 24 11:25:07 1998 Jeffrey A Law (law@cygnus.com) * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide GPR loads/stores generated on the r5900. (mips_find_saved_regs, mips32_skip_prologue): Likewise. * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define. * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise. end-sanitize-r5900 Thu Apr 23 16:37:20 1998 Jason Molenda (crash@bugshack.cygnus.com) * README: Minor changes for 4.17 release. start-sanitize-java Thu Apr 23 15:44:39 1998 Per Bothner * symfile.c (deduce_language_from_filename): .class implies java. end-sanitize-java Thu Apr 23 12:52:21 1998 Philippe De Muyter * configure.in (strerror): Check if function must be declared. * acconfig.h (NEED_DECLARATION_STRERROR): New define slot. * gdb_string.h (strerror): Function declaration issued if NEED_DECLARATION_STRERROR. * configure, config.in : Files regenerated. Thu Apr 23 12:27:43 1998 Philippe De Muyter * symfile.c (simple_overlay_update_1): Do not prefix array address by `&'. * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto. * tracepoint.c (encode_actions): Ditto. * language.c, complaints.c, utils.c (varargs.h): Do not include that file here, it is already included indirectly by defs.h. * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return value to the appropriate pointer type. * utils.c (floatformat_from_doublest): Ditto. * tracepoint.c (read_actions, _initialize_tracepoint): Ditto. (add_memrange): Likewise with xrealloc return value. * stabsread.c (ref_add): Ditto. * coffread.c (coff_symfile_init): Likewise for xmmalloc return value. * elfread.c (elf_symfile_read): Ditto. * os9kread.c (os9k_symfile_init): Ditto. Thu Apr 23 00:32:08 1998 Tom Tromey * config.in: Rebuilt. * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT, HAVE_LC_MESSAGES): Define. Wed Apr 22 15:38:56 1998 Tom Tromey * configure: Rebuilt. * configure.in: Call CY_GNU_GETTEXT. * Makefile.in (top_builddir): New macro. (INTL): Define to @INTLLIBS@. (INTL_DEPS): New macro. (CDEPS): Reference INTL_DEPS, not INTL. start-sanitize-sky Wed Apr 22 13:40:16 1998 Doug Evans * txvu-tdep.c (txvu_print_insn): Fix thinko. end-sanitize-sky Wed Apr 22 12:58:23 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) Handle missing shared libraries during the examination of a core dump gracefully. * solib.c (find_solib): Use catch_errors around call to solib_map_sections. Use warning instead of error if reading of the shared library name fails. (solib_map_sections): Change return and argument types to make it callable from catch_errors. (symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL. * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections, symbol_add_stub): Ditto. Wed Apr 22 14:34:49 1998 Michael Meissner * Makefile.in (INTL*): Add support to link in the intl library, and to add -I options to its source and object directories. (INTERNAL_CFLAGS): Ditto. (C{LIBS,DEPS}): Ditto. start-sanitize-sky Wed Tue 21 17:29:48 1998 Jim Lemke * configure.in: Add configure option --with-sim-funit. end-sanitize-sky Tue Apr 21 11:20:54 1998 Frank Ch. Eigler * mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions with subtarget-specific `mach', rather than fixed default. * config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default disassembly `mach'. start-sanitize-r5900 * config/mips/tm-r5900.h (TM_PRINT_INSN_MACH): Override. end-sanitize-r5900 start-sanitize-sky * config/mips/tm-txvu.h (TM_PRINT_INSN_MACH): Override. end-sanitize-sky Mon Apr 20 15:35:03 1998 Philippe De Muyter * coffread.c (decode_base_type): Treat a long field with size greater than TARGET_LONG_BIT as long long. * values.c (value_from_longest): Print code value in error message. Mon Apr 20 15:32:21 1998 Mark Kettenis * gdb/gdb_string.h (strdup): Declare only if not defined as a macro. Mon Apr 20 14:18:45 1998 J. Kean Johnston * procfs.c: Added replacement macros for LWP stuff. Fixed support for UnixWare / SVR4.2MP targets and any targets which use multi-file /proc entries. Fixed support for hardware watchpoints. * solib.c: SCO needs some of the same code as SunOS. Change preprocessor conditionals. * config/i386/i386sco5.mt: New file. * config/i386/tm-i386sco5.h: New file. * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o. * config/i386/nm-i386v42mp.h (TARGET_HAS_HARDWARE_WATCHPOINTS): define. Add other macros for hardware assisted watchpoints. * config/i386/nm-i386sco5.h: Correct attributions. (TARGET_HAS_HARDWARE_WATCHPOINTS): define. * config/i386/nm-linux.h (target_remote_watchpoint): Pass 'type' through to i386_insert_watchpoint. Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * infrun.c (wait_for_inferior): Don't add signalled processes as new threads. * procfs.c (wait_fd): Note if LWP has exited. (procfs_wait): use GETPID to get process ID. Sat Apr 18 15:21:04 1998 Stan Cox * configure.tgt: Added sparc86x support. Thu Apr 16 13:13:24 1998 Jason Molenda (crash@bugshack.cygnus.com) * rdi-share/etherdrv.c (EthernetWrite): Use strerror to get error string if in an ANSI C-ish environment. Wed Apr 15 18:59:48 1998 Mark Alexander * sparc-tdep.c (SPARC_HAS_FPU): Define. (sparc_extract_return_value): New function, required to handle machines without floating point. (sparc_store_return_value): Ditto. * config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call sparc_extract_return_value instead of using inline code. (sparc_extract_return_value): Declare. (STORE_RETURN_VALUE): Call sparc_store_return_value instead of using inline code. (sparc_store_return_value): Declare. Wed Apr 15 12:19:42 1998 Martin M. Hunt * solib.c (enable_break): Only call warning once instead of three times. Tue Apr 14 16:52:59 1998 Mark Alexander * sparc-tdep.c (sparc_extract_struct_value_address): Make it work correctly on little-endian hosts. (sparc_push_arguments): New function. (gdb_print_insn_sparc): New function. (_initialize_sparc_tdep): Make gdb_print_insn_sparc the default disassembler, so that SPARClite-specific instructions will be recognized. * sparcl-tdep.c (readchar): Print debugging information. (debug_serial_write): New function, a replacement for SERIAL_WRITE that prints debugging information. * config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define. (sparc_push_arguments): Declare. Tue Apr 14 15:43:49 1998 John Metzler * gdbcfgxref (xref_menu): Call new regex and wild card searches Now you can type in a specific triple like mips64-vr4300-elf or somthing like mips*.h (triple_search) wildcardsearch): The new functions start-sanitize-vr4320 * configure.tgt: Switch over to use tm-4320.h. Since I switched to MIPS EABI the fixes are no longer backward compatible with 4300. * tm-vr4320.h: Added * vr4320.mt: Added end-sanitize-vr4320 Mon Apr 13 16:28:07 1998 Elena Zannoni * utils.c: (warning) added call to warning_hook * source.c: (find_source_lines) modified to call warning in case of source vs. executable time stamp mismatch. Simplified object file check. Initialized mtime to 0. * defs.h: added warning_hook prototype * top.c: added warning_hook prototype. Mon Apr 13 09:54:08 1998 Keith Seitz * config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing definition. Fri Apr 10 22:36:28 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) Update support for x86 Solaris 2. * config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration files for x86 Solaris 2. * config/i386/i386sol2.mt, i386sol2.mh: Use them. * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract carry flag from a given regset. (IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name is a SunPro transformed name. * i386-tdep.c (sunpro_static_transform_name): New function to extract the source name from a SunPro transformed name. * inferior.h (procfs_first_available, procfs_get_pid_fd): Add prototypes. * infrun.c (wait_for_inferior): Handle breakpoint hit in signal handler without intervening stop in sigtramp. * procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY instead of direct access to the status register. (procfs_get_pid_fd): New function, returns procfs fd for a given pid. * sol-thread.c (ps_lgetLDT): New function, returns LDT for a given lwpid. (sol_find_new_threads): Handle failed libthread_db initialization gracefully. * stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME to check for a SunPro transformed symbol name. Fri Apr 10 10:35:35 1998 John Metzler * utils.c (fmthex): A formatting function for hexdumps * mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of bit pattern interpretations. mips_fetch_instruction does not work for 16 bit instructions. Some confusion remains about sign extension in backward branches. (mips32_relative_offset): Sign extension (mips32_next_pc): Major debugging, bit pattern interpretation (print_unpack): debugging printf (fetch_mips_16): new funtion, key on PC low bit, not symbol table (mips16_next_16): Initial major debugging of this function. Lots of bit pattern mistakes. (mips_next_pc): key on low bit of PC, not symbol table. * symfile.c(generic_load) : Added a download verification which reads back the loade code. Download chunk size is now a defined macro. Fixed a bug in which downloading slips into loading one byte at a time. Lower level functions in monitor.c can load long sequences of bytes and make use of these fixups. Referencing bfd-start_address directly was incorrectly getting zero for start. Thu Apr 9 19:20:32 1998 Ian Lance Taylor * mips-tdep.c (do_fp_register_row): Use alloca rather than arrays with dynamic size. Wed Apr 8 19:21:42 1998 Jason Molenda (crash@bugshack.cygnus.com) * top.c (print_gdb_version): Print 1998 now. Wed Apr 8 16:57:22 1998 Philippe De Muyter * source.c: Remove obsolete decl of strstr(). Wed Apr 8 16:47:33 1998 Jason Molenda (crash@bugshack.cygnus.com) * solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's patch of March 23 1998. * breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's patch of March 23 1998. Sat Apr 4 10:05:00 1998 Dawn Perchik * mdebugread.c (parse_partial_symbols): If this is an .mdebug section in an ELF file, override a symbol's ECOFF section with its ELF section. Also, fix stabs continuation where a stabs string continues for more than one continuation. Mon Apr 6 09:17:48 1998 Andrew Cagney * mips-tdep.c (mips_push_arguments): Specify dimention of valbuf using MAX_REGISTER_RAW_SIZE. Sat Apr 4 10:05:00 1998 Dawn Perchik * infrun.c: Fix prototype of signals_info to match static funtion. Thu Apr 2 12:47:41 1998 Frank Ch. Eigler * sol-thread.c (sol_thread_store_registers): Save & restore new value of single updated register to prevent accidental clobbering. Wed Apr 1 22:01:09 1998 Mark Alexander * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define. * config/sparc/sparclite.mt: Link in the erc32 simulator. Wed Apr 1 16:30:49 1998 Ian Dall * ns32k-tdep.c (flip_bytes, ns32k_localcount, ns32k_get_enter_addr, sign_extend): Restore functions mysteriously deleted. * ns32knbsd-nat.c: New (?) file to support fetching and storing registers on NetBSD hosts. * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of ns32k-nat.o * ns32km3-nat.c (reg_offset): Get order of floating point registers correct. Add extra 32382 register offsets. (REG_ADDRESS): define to point at correct part of thread state. Use calls to "warning" instead of "message". * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS, REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382 fpu registers. Wed Apr 1 13:43:07 1998 Philippe De Muyter * NEWS: m68k-motorola-sysv host support added. * coffread.c (coff_start_symtab): Accept the filename as an argument, set it here. Callers updated. Wed Apr 1 23:13:23 1998 Andrew Cagney * config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR, FSR and FIR registers. (REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE. (REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE. * config/mips/tm-mips64.h: Ditto. Tue Mar 31 21:30:39 1998 Nick Clifton * arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol vector to the info structure when disassembling thumb instructions. * coffread.c (coff_symtab_read, read_one_sym, process_coff_symbol): Support Thumb symbol types. * dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it is defined) for function symbols. Mon Feb 16 14:05:54 1998 Andrew Cagney * d10v-tdep.c (d10v_extract_return_value): Wierd. GCC wants to return odd sized register quantities with only half of the first register used! * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when size > 8. Tue Mar 31 16:39:28 1998 Michael Snyder * tracepoint.c (get_tracepoint_by_number): change warning to note. (delete_trace_command): suppress y/n query if no tracepoints, or if not from_tty. (trace_pass_command): reject junk at end of args. (read_actions): an action list consisting only of "end" is discarded. (validate_actionline (for collect command)): an argument beginning with a dollar_sign but not recognized as a special argument is parsed like any other expression -- if it isn't a register name, it's rejected. Also reject an empty argument to while-stepping. (trace_find_command): reject a negative frame number argument. (_initialize_tracepoint): set $traceframe initially to -1. Mon Mar 30 16:42:12 1998 Jason Molenda (crash@bugshack.cygnus.com) * rdi-share/Makefile.am, rdi-share/aclocal.m4, rdi-share/configure: New files. * rdi-share/configure.in: Rewritten to be an autoconf input file. * rdi-share/Makefile.in, rdi-share/configure: Generated by automake/autoconf. * rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests to check environment. Sun Mar 29 15:17:16 1998 Keith Seitz * tracepoint.c (trace_start_command): Set trace_running_p. (trace_stop_command): Clear trace_running_p. Sat Mar 28 15:19:48 1998 Stan Shebs * NEWS: Update for 4.17 release. Fri Mar 27 10:15:50 1998 David Taylor * tracepoint.c (parse_and_eval_memrange): Fix memory leaks. (encode_actions): Use the new gen_trace_for_expr function instead of expr_to_address_and_size; collect registers when using expressions. (clear_collection_list): Fix memory leak. 1998-03-26 Jim Blandy * ax-gdb.h (gen_trace_for_expr): Add prototype. Thu Mar 26 17:24:23 1998 David Taylor * tracepoint.c (validate_actionline): Fix memory leak. (encode_actions): Fix memory leak. Thu Mar 26 16:16:55 1998 David Taylor * tracepoint.c (trace_mention): New function. (trace_command): Call it. 1998-03-26 Jim Blandy * ax-general.c (ax_reqs): New function. * ax.h (enum agent_flaws, struct agent_reqs): New types. (agent_reqs): New extern prototype. Well, actually, this was there before, due to a premature checkin. (struct aop_map): Add new `data_size' member. * ax-general.c (aop_map): Supply its value. * ax-gdb.c (agent_command): Call ax_reqs, for testing. * ax-general.c (ax_print): If we encounter an invalid or incomplete opcode, don't abort; just print an error message. * ax-gdb.c: Generate trace bytecodes, as appropriate. (trace_kludge): New variable. (gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked nicely. (expr_to_agent): Ask for no trace bytecodes. (gen_trace_for_expr): New function. (agent_command): Call it, and display the result appropriately --- no struct axs_value, so no type or kind information. * ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT. Thu Mar 26 22:29:28 1998 Elena Zannoni * tracepoint.c (trace_status_command): Recognize a boolean return value from the stub to indicate whether trace experiment is running. Export this value as a global state variable. (trace_running_p) for use by the GUI. (from Michael Snyder) (trace_pass_command) added call to modify_tracepoint_hook. * tracepoint.h export trace_running_p. Thu Mar 26 13:08:01 1998 David Taylor * tracepoint.c (validate_actionline): do not error out if exp->elts[0].opcode is not on short line -- let expr_to_address_and_size handle it. 1998-03-26 Jim Blandy * tracepoint.c: Include "ax.h", not "agentexpr.h". * tracepoint.c (encode_actions): Call expr_to_address_and_size, not simply expr_to_agent. * ax-general.c: Comment out code in progress, so everyone else can at least compile. * gdbtypes.c: Doc fix. * ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files. * Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o. (SFILES): Add ax-general.c, ax-gdb.c. (ax_h): New variable. (ax-general.o, ax-gdb.o): New rules. start-sanitize-sky Wed Mar 25 11:45:19 1998 Frank Ch. Eigler * configure.in (sim-gpu2): Added target type checking to make --with-sim-gpu2 option only valid for sky target. * configure: Regenerated. end-sanitize-sky Tue Mar 24 16:22:40 1998 Stu Grossman * Makefile.in: Derive SHELL from configure. * config/d10v/d10v.mt config/m32r/m32r.mt config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm from SIM. This prevents dependency checking of -lm (under NT native builds). (It is automatically added by configure if it exists.) start-sanitize-d30v * config/d30v/d30v.mt: Ditto. end-sanitize-d30v * doc/configure mswin/configure nlm/configure testsuite/gdb.base/configure testsuite/gdb.c++/configure testsuite/gdb.chill/configure testsuite/gdb.disasm/configure testsuite/gdb.stabs/configure testsuite/gdb.threads/configure: Regenerate with autoconf 2.12.1 to fix shell issues for NT native builds. Mon Mar 23 18:10:57 1998 Ulrich Drepper (drepper@cygnus.com) * solib.c (solib_create_inferior_hook): Rewrite previous change to check the type of file via BFD. Mon Mar 23 13:52:28 1998 Ulrich Drepper (drepper@cygnus.com) * breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events like bp_breakpoints. * solib.c (solib_create_inferior_hook): Relocate section addresses if the alleged start address doesn't agree with the PC. start-sanitize-sky Mon Mar 23 13:07:22 1998 Frank Ch. Eigler * configure.in (sim-gpu2): Added --with-sim-gpu2 as configure option, to allow gdb+sim linking with sky GPU2 library. * configure: Regenerated. end-sanitize-sky Sat Mar 21 19:34:49 1998 Elena Zannoni merged changes from Foundry (list follows by file/author): - Tom Tromey * Makefile.in (gdbres.o): New target. (WINDRES): New define. * configure: Rebuilt. * configure.in (WINDRES): Define. (CONFIG_OBS): Include gdbres.o on Windows. * gdbtool.ico: New file. * gdb.rc: New file. * ser-unix.c - Keith Seitz (wait_for): Don't reset the timeout_remaining for CYGWIN32, since we now effectively poll the serial port. Don't reset the current_timeout, either, since this member is used by hardwire_readchar to track the timeout and call the ui_loop_hook. (hardwire_readchar): Poll the serial port for Cygwin32. We timeout every second, update the UI, and loop around doing this until we have hit the real timeout or we get data or an error. This will allow the UI to stay active while gdb is "blocked" talking to the target. - Martin M. Hunt (wait_for): Do reset current_timeout because it is only used to keep track of what the current timeout for the scb is. * top.c - Martin M. Hunt (quit_confirm): Change exit message again for GUI. (pc_changed_hook): Add prototype. - Tom Tromey (quit_confirm): Added missing `else'. (quit_confirm): Special-case message if init_ui_hook is set. * symtab.c - Martin M. Hunt (find_pc_sect_line): If no symbol information is found, return correct pc anyway. (find_methods): Comment out an apparently bogus error message because it messes up Foundry. * serial.c - Martin M. Hunt (_initialize_serial): Add a description of "set remotelogbase". * findvar.c - Martin M. Hunt (write_register_gen): Add call to pc_changed_hook if the PC is being changed. * defs.h - Martin M. Hunt (pc_changed_hook): Define. * command.c - Martin M. Hunt (do_setshow_command): If no arguments are supplied, don't dump core, instead print out an error message. * breakpoint.c - Martin M. Hunt Make set_raw_breakpoint, set_breakpoint_count, and breakpoint_count non-static so they are accessible from gdbtk.c. (enable_breakpoint): Enable breakpoint with same disposition instead of changing all breakpoints to donttouch. * annotate.h - Keith Seitz Add declarations for annotation hooks. * annotate.c - Keith Seitz Add hooks: annotate_starting_hook, annotate_stopped_hook, annotate_signalled_hook, annotate_exited_hook. (annotate_starting): If hook exists, call it instead. (annotate_stopped): If hook exists, call it instead. (annotate_exited): If hook exists, call it instead. (annotate_signalled): If hook exists, call it instead. Fri Mar 20 14:45:36 1998 Michael Snyder * gdbserver/Makefile.in: add dependency on XM_CLIBS. * gdbserver/low-sim.c (registers) force into alignment. (create_inferior): Fix typo on new_argv; add abfd arg to sim_open, sim_create_inferior. Add reg_size arg to sim_fetch_register, sim_store_register. Make simulator take a single-step to get into a known running state. * gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL. * gdbserver/server.c: Add remote_debug variable to control debug output. * gdbserver/server.h: Add prototypes for enable/disable_async_io. * gdbserver/remote-utils.c: add verbose debugging output controlled by "remote_debug" variable. Add call to "disable_async_io()" to avoid being killed by async SIGIO signals. * config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES), so that gdbserver can be built with the m32r simulator. Fri Mar 20 09:04:06 1998 Andrew Cagney start-sanitize-r5900 * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE): Redefine as expression from REGISTER_VIRTUAL_TYPE. (REGISTER_RAW_SIZE): Ditto. (REGISTER_VIRTUAL_TYPE): Redefine, use explicit size for 32 bit registers. end-sanitize-r5900 * gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin types. start-sanitize-r5900 (builtin_type_{,u}int128): Ditto. end-sanitize-r5900 * gdbtypes.c (_initialize_gdbtypes): Initialize new types. * mips-tdep.c (do_gp_register_row): Pad register value when GP register is smaller than MIPS_REGSIZE. * findvar.c (value_of_register): When raw and virtual register values identical, check that sizes are consistent. Thu Mar 19 11:32:15 1998 Michael Snyder (msnyder@cleaver.cygnus.com) * minsyms.c (compare_minimal_symbols): If addresses are identical, then compare on names. Sorted list should have symbols with identical addresses AND names adjacent, so dups can be discarded. Wed Mar 18 12:50:17 1998 Jeff Law (law@cygnus.com) * stabsread.c (define_symbol): Don't look for ',' as a LRS indicator. Wed Mar 18 10:34:51 1998 Nick Clifton * rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *. Fri Mar 13 15:43:53 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/mips/xm-mips.h (CC_HAS_LONG_LONG): Undefine for Ultrix when compiling with native cc, the compiler has broken long long support. Fri Mar 13 15:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/m68k/xm-sun3os4.h: Remove malloc declarations, they are handled via autoconf now. * remote.c (remote_ops, extended_remote_ops): Replace static forward declaration by moving the static definition to the top of the file, for old K&R compilers. * tracepoint.c (collect_symbol, trace_start_command): Replace ANSI string concatenation with K&R compatible simple string. 1998-03-11 Fred Fish * source.c (select_source_symtab): Don't reach error if we have a current_source_symtab from reading in partial symbol table. start-sanitize-vr4320 Tue Mar 10 16:15:13 1998 Gavin Koch * configure.tgt (mips64*vr4320*el-*-elf*) : Removed spurious case. end-sanitize-vr4320 Fri Mar 6 13:10:27 1998 Fred Fish * utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than SERIAL_FLUSH_OUTPUT. * serial.h (struct serial_ops): Add drain_output, pointer to function that waits for output to drain. (SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain. * ser-unix.c (hardwire_drain_output): New function and prototype. * ser-unix.c (hardwire_ops): Add entry for drain_output function. * ser-tcp.c (tcp_ops): Ditto. * ser-ocd.c (ocd_ops): Ditto. * ser-mac.c (mac_ops): Ditto. * ser-go32.c (dos_ops): Ditto. * ser-e7kpc.c (e7000pc_ops): Ditto. Thu Mar 5 16:07:41 1998 Michael Snyder (msnyder@cleaver.cygnus.com) * sparcl-tdep.c: fix #endif comments Thu Mar 5 15:10:35 1998 Jason Molenda (crash@bugshack.cygnus.com) * Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@. Thu Mar 5 14:42:41 1998 Keith Seitz * ocd.c (ocd_open): If we fail ocd_start_remote, make sure we error () so that we abort out of bdm_ppc_open. Wed Mar 4 16:53:52 1998 Martin M. Hunt * serial.c (_initialize_serial): Add a description of "set remotelogbase". * command.c (do_setshow_command): If no arguments are supplied, don't dump core, instead print out an error message. Wed Mar 4 16:50:18 1998 Jason Molenda (crash@bugshack.cygnus.com) * gdbtk.c (gdb_listfiles): Fix thinko in last change. Wed Mar 4 15:34:49 1998 Jason Molenda (crash@bugshack.cygnus.com) * gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically. Wed Mar 4 01:39:08 1998 Ron Unrau * elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into MAKE_MSYMBOL_SPECIAL * config/mips/tm-mips.h: ditto Tue Mar 3 17:19:08 1998 John Metzler start-sanitize-vr4111 * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300 * config/mips/vr4xxx.tm: implements vr4111 as separate from 4300 * configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx end-sanitize-vr4111 * dwarfread.c (read_tag_pointer_type): Pointer sizes now come from TARGET_PTR_BIT rather from sizeof(char *) on host. Tue Mar 3 14:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * alpha-nat.c (fetch_osf_core_registers): Renamed from fetch_aout_core_registers. (alpha_osf_core_fns): Renamed from alpha_aout_core_fns, change flavour to bfd_target_unknown_flavour for OSF core files. start-sanitize-vr4320 Tue Mar 3 11:12:39 1998 Gavin Koch * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*) : Added. end-sanitize-vr4320 Mon Mar 2 17:44:13 1998 Michael Snyder (msnyder@cleaver.cygnus.com) * breakpoint.c (_initialize_breakpoint): Make "en" an alias for "enable" (so that it doesn't conflict with "end"). Mon Mar 2 17:04:25 1998 Jason Molenda (crash@bugshack.cygnus.com) * Makefile (VERSION): Bump to 4.17.1. Mon Mar 2 16:59:15 1998 Jason Molenda (crash@bugshack.cygnus.com) * rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux. Mon Mar 2 16:51:44 1998 Jason Molenda (crash@bugshack.cygnus.com) * Makefile.in (YYFILES): Remove in maintainer-clean, not distclean. Mon Mar 2 16:47:11 1998 Philippe De Muyter * Makefile.in (distclean): Add `rm $(YYFILES)'. Mon Mar 2 16:45:48 1998 Philippe De Muyter * coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum is unsigned. Sun Mar 2 15:16:13 1998 Richard Henderson * configure.host, configure.tgt: Add sparc-linux. * sparc-nat.c: Include not for Linux. * config/sparc/*linux*: New files. Mon Mar 2 12:12:41 1998 Anthony Thompson (athompso@cambridge.arm.com) * arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm if we're big endian; else call print_insn_little_arm. Mon Feb 24 11:24:57 1998 Richard Henderson * Makefile.in (BISON): Don't even pretend to use yacc. (c-exp.tab.o): Use bison -o to use a unique intermediate file. (f-exp.tab.o, m2-exp.tab.o): Likewise. start-sanitize-java (jv-exp.tab.o): Likewise. end-sanitize-java Tue Feb 24 03:32:59 1998 Andrew Cagney * remote-sim.c (gdbsim_fetch_register): Don't abort when the register size is wrong. start-sanitize-r5900 Tue Feb 24 02:53:41 1998 And * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE, REGISTE_RAW_SIZE): Re-define. end-sanitize-r5900 Thu Feb 19 16:49:48 1998 John Metzler * target.c (debug_to_fetch_registers,debug_to_store_registers, debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing 64 bit targets crashed long long printfs. Tue Feb 17 16:36:22 1998 Michael Snyder (msnyder@cleaver.cygnus.com) * symfile.c (read_target_int_array): rename read_target_long_array and force the sizeof an ovly_table element to sizeof(long), instead of sizeof(int). Tue Feb 17 18:05:05 1998 Frank Ch. Eigler * remote-mips.c (mips_request): Use unsigned long during parsing returned value from monitor, to prevent accidental sign extension. Tue Feb 17 14:28:33 1998 Peter Schauer * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE. * configure.in: Ditto. * configure: Regenerated. Tue Feb 17 14:07:34 1998 Peter Schauer * gdbtypes.c (check_typedef): Do not try to resolve the length of a type which has TYPE_FLAG_TARGET_STUB set, if the target type has set TYPE_FLAG_TARGET_STUB as well. Tue Feb 17 14:32:18 1998 Andrew Cagney * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Pass register size to sim_{fetch,store}_register. Check nr of register bytes transfered is correct. Mon Feb 16 14:05:54 1998 Andrew Cagney * remote-d10v.c (remote_d10v_open): Call push_remote_target instead of open_remote_target. * remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS to translate addr/size when defined. (open_remote_target): Delete. * target.h (open_remote_target): Delete. * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define. Mon Feb 16 14:05:54 1998 Andrew Cagney * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when sizeof type > 1. Mon Feb 16 14:05:54 1998 Andrew Cagney * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when sizeof type > 1. Sun Feb 15 16:10:50 1998 Ron Unrau * parse.c (write_dollar_variable): call new function target_map_name_to_register to allow targets to define their own register name aliases. * infcmd.c (registers_info): use target_map_name_to_register so that "print $reg" and "info reg $reg" use the same register name aliases. Fri Feb 13 16:40:30 1998 Stan Shebs * config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used. * config/i386/xm-i386mk.h: Fix an include. * config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used. Thu Feb 12 16:12:07 1998 Frank Ch. Eigler * remote-mips.c (mips_enter_debug): Sleep before sending CR to monitor. (mips_exit_debug): Accept any whitespace / verbiage before monitor prompt reappears. Thu Feb 12 18:25:42 1998 Andrew Cagney * d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte accumulators. Thu Feb 12 17:10:22 1998 Andrew Cagney * valops.c (value_at): For d10v, make read pointers with read_target_unsigned_integer, keep addresses unsigned. (value_fetch_lazy): Ditto. Thu Feb 12 12:14:02 1998 Andrew Cagney * remote-d10v.c: New file. Layer the d10v GDB->remote memory map on top of the remote serial memory transfer functions. * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o * Makefile.in (remote-d10v.o): Add dependencies. * remote.c (remote_open_1): Add arg extended_p, engage extended protocol when extended_p. (remote_open, extended_remote_open): Pass !extended_p / extended_p to remote_open_1. * remote.c (open_remote_target), target.h: New function. Wed Feb 11 08:41:15 1998 Andrew Cagney * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o. Tue Feb 10 17:50:37 1998 Keith Seitz * tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook if it exists. Remove static declaration of free_actions. * tracepoint.h: Add declaration of free_actions. Tue Feb 10 12:17:13 1998 Fred Fish * symtab.c (decode_line_1): Revert change that mistakenly removed assignment of sals[0].pc field. Mon Feb 10 12:37:47 1998 Philippe De Muyter * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)'; (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes' is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'. (FRAME_NUM_ARGS): New macro. * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto. * delta68-nat.c (clear_insn_cache): New function, forgotten in previous patch. Mon Feb 9 11:10:06 1998 Andrew Cagney * d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros. * config/d10v/tm-d10v.h (IMEM_START): Move to 0x01...... (DMEM_START): Move to 0x00...... (STACK_START): Move to 0x00..7ffe. (D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally. * d10v-tdep.c (d10v_xlate_addr): Delete function. Mon Feb 9 15:10:21 1998 Fred Fish * symtab.c (fixup_psymbol_section): Move forward declaration to top of file with other such decls. Make it a static function. * symtab.h: Minor formatting tweaks. Mon Feb 9 13:14:12 1998 Stan Shebs * config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS): Remove redefinition. * config/i960/tm-i960.h (BREAKPOINT): Define. Mon Feb 9 15:35:38 1998 Ian Lance Taylor * Makefile.in (init.c): Ignore errors when making init.c. Seems necessary to work around bug in Solaris make. Sun Feb 6 02:44:28 1997 Philippe De Muyter * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted. (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined. (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified because floating-point values return via %fp0. (CLEAR_INSN_CACHE): New macro. * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed to use DOUBLEST. (REGISTER_CONVERT_TO_RAW): Ditto. * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined, call it after having written in child process's memory. * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO. (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO. Fri Feb 6 16:17:30 1998 Jeffrey A Law (law@cygnus.com) * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to override. (TARGET_LONG_LONG_BIT): Likewise. (TARGET_PTR_BIT): Likewise. start-sanitize-r5900 * config/mips/tm-r5900.h (TARGET_PTR_BIT): Define to 32 bits. end-sanitize-r5900 start-sanitize-sky Fri Feb 6 14:33:34 1998 Doug Evans * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf. * config/mips/txvu.mt (SIM): txvu -> mips. end-sanitize-sky Fri Feb 6 17:42:22 1998 Andrew Cagney * config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW, D10V_CONVERT_DADDR_TO_RAW): Define. * d10v-tdep.c (d10v_push_arguments): Re-write. Pass arguments in registers, regardless of their size, when they fit. Thu Feb 5 13:16:36 1998 Andrew Cagney * d10v-tdep.c (d10v_extract_return_value): For function pointers translate address to IMAP area. * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from struct. (POP_FRAME): Point at generic_pop_current_frame. * d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames, handled earlier. (d10v_push_return_address): New function. (d10v_pop_dummy_frame): Delete. (d10v_fix_call_dummy): Delete. (d10v_call_dummy_address): Delete. * d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and frameless. * d10v-tdep.c (d10v_push_arguments): Keep stack word aligned. * config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract address of structure from first ARG1_REGNUM. * d10v-tdep.c (d10v_push_arguments): Force 4 byte args into even-odd register pair. Store 1 and 2 byte args in registers. * valops.c (value_fetch_lazy): Ensure that a D10V function pointer is fetched in the correct byte order. (value_at): Ditto. Also ensure data pointers are mapped to data segment. * config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P): * d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE. (d10v_pop_frame): Replace R13 with LR_REGNUM. (d10v_push_arguments): Replace R2 with ARG1_REGNUM. (d10v_push_arguments): Replace 6 with ARGN_REGNUM. (d10v_extract_return_value): Access return value with RET1_REGNUM. * config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM): Define. (STORE_RETURN_VALUE): Specify return register using RET1_REGNUM. (STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr location. Thu Feb 5 13:16:36 1998 Andrew Cagney * blockframe.c (generic_pop_dummy_frame): Flush the frame, no longer valid. * blockframe.c (generic_pop_current_frame), frames.h: New function. Thu Feb 5 17:18:16 1998 Andrew Cagney * remote-sim.c (gdbsim_create_inferior): clear_proceed_status before /re/starting the simulator. Thu Feb 5 15:55:31 1998 C. M. Heard (heard@vvnet.com) * top.c (do_nothing): Remove signal handler after signal is caught. Thu Feb 5 11:57:06 1998 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c (tracepoint_operation): call free_actions instead of free. (free_actions): eliminate some memory leaks for actions. (validate_actionline): pass string arg by reference, so we can change the pointer. Change all memrange collection arguments to canonical form (literal address and size), to enforce early evaluation. Accept UNOP_MEMVAL (assembly variables) for trace collection. (parse_and_eval_memrange): accept expressions for the address and size fields of a memrange (and evaluate them immediately). (several places): use -1 instead of zero to distinguish an absolute memrange from a register-relative one. (encode_actions): add handling for UNOP_MEMVAL (assembly variable). Wed Feb 4 17:40:21 1998 Jason Molenda (crash@bugshack.cygnus.com) * Makefile.in (SFILES): add tracepoint.c. (LINTFILES): add @CONFIG_SRCS@. (SOURCES): Ditto. * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS. * configure: Regenerated. Tue Feb 3 16:12:32 1998 Gordon W. Ross (gwr@mc.com) * infptrace.c (child_resume): Don't try to step if NO_SINGLE_STEP is defined. Mon Feb 2 19:06:13 1998 Jason Molenda (crash@bugshack.cygnus.com) * Makefile.in (VERSION): Bump to 4.16.2. Mon Feb 2 17:18:25 1998 Richard Henderson * alpha-nat.c (fetch_aout_core_registers): Rename from fetch_core_registers. (fetch_elf_core_registers): New function. (supply_gregset): Use ALPHA_REGSET_BASE. (supply_fpregset): Likewise. (fill_fpregset): Likewise. (alpha_aout_core_fns): Rename from alpha_core_fns. (alpha_elf_core_fns): New. * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o. Disable MMALLOC. * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF. (TARGET_ELF64): Likewise. (ALPHA_REGSET_BASE): New. * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New. * config/alpha/tm-alphalinux.h: Include tm-sysv4.h. * solib.c (elf_locate_base): Add TARGET_ELF64 support. (info_sharedlibary_command): Likewise. * configure.host: Match alpha*. * configure.tgt: Likewise. Fri Jan 30 15:11:38 1998 David Taylor Changes by * infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting whether we are in the dynamic symbol resolution code (wait_for_inferior): invoke it. * solib.c (in_svr4_dynsym_resolve_code): new function (enable_break): record start and end of the dynamic linker text and plt sections for use in in_svr4_dynsym_resolve_code. * solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition; (in_svr4_dynsym_resolve_code): declare it. * config/nm-gnu.h (solib.h): move inclusion to after definition of SVR4_SHARED_LIBS. * config/nm-sysv4.h (solib.h): ditto. * config/i386/nm-i386sco5.h (solib.h): ditto. * config/i386/nm-linux.h (solib.h): ditto. * config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine. Thu Jan 29 19:39:31 1998 Stan Shebs * coffread.c (coff_symtab_read) [SEM]: Remove code, macro can never be defined. * dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]: Remove, no longer needed. * hppa-tdep.c (N_SET_MAGIC): Remove, no longer used. * config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto. * config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto. * config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o. Wed Jan 28 14:46:52 1998 Stan Shebs Suggested by Chris Walter : * dwarfread.c (set_cu_language): Recognize Fortran. * dwarf2read.c (set_cu_language): Ditto. (read_array_type): Fix language test. Wed Jan 28 12:51:08 1998 Michael Snyder (msnyder@cleaver.cygnus.com) * blockframe.c (generic_frame_chain_valid): A frame pointer may be valid if it is equal to the frame pointer of its caller (ie. not necessarily strictly INNER_THAN). Allows frameless functions. Wed Jan 28 11:23:25 1998 Mark Alexander * monitor.c (monitor_vsprintf): New function to handle printing of large addresses using %A format specifier. (monitor_printf_noecho, monitor_printf): Use monitor_vsprintf instead of vsprintf. * dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx to print addresses. Tue Jan 27 16:14:23 1998 Jason Molenda (crash@bugshack.cygnus.com) * configure.in (CONFIG_LDFLAGS): Only add -export-dynamic when using GNU ld. Mon Jan 26 19:07:46 1998 Jason Molenda (crash@bugshack.cygnus.com) * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset): Add closing parenthesis. From HJ Lu. Mon Jan 26 17:54:45 1998 Mark Alexander * dve3900-rom.c: Improve performance by using memory commands that print less fluff. Minor cosmetic changes. Eliminate compiler warnings. Sat Jan 24 23:44:43 1998 Martin M. Hunt * breakpoint.c (enable_breakpoint): Preserve breakpoint disposition when enabling a breakpoint. * symtab.c (find_pc_sect_line): If no symbol information is found, return correct pc anyway. Fri Jan 23 17:26:22 1998 Stan Shebs * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*, ns32k-*-mach3*): Fix file names. (i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config recognition, no source files for these. * configure.tgt (powerpc-*-aix4*): Remove config, now identical to powerpc-*-aix*. * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files, no longer needed. Fri Jan 23 16:49:41 1998 Mark Alexander * monitor.c (monitor_write, monitor_readchar): New functions. * monitor.h (monitor_write, monitor_readchar): Declare. * dve3900-rom.c: Add support for fast loading on ethernet connections. Fri Jan 23 07:47:06 1998 Fred Fish * config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }". (TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp. (TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp. (d10v_write_fp, d10v_read_fp): Add prototypes. * symtab.c (decode_line_1): Remove assignment of sals[0].pc field. * symfile.c (simple_overlay_update, simple_overlay_update_1): Ignore the size of overlay sections. This check is redundant anyway. * printcmd.c (print_frame_args): Ditto. * valops.c (value_fetch_lazy): Ditto. * values.c (unpack_long): Ditto. * d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs, d10v_init_extra_frame_info): Fix some minor bugs so the finish command works properly. (show_regs): Change num1 and num2 types from "long long" to "LONGEST". (d10v_read_fp, d10v_write_fp): New functions. (d10v_push_arguments): Remove unneeded assigns to "val" and "contents". (d10v_push_arguments): Fix for pointers and structs. (d10v_extract_return_value): Fix for pointers and chars. Tue Jan 20 18:53:18 1998 Stan Shebs * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config recognition, no source files for these (note that the i386 Mach config is for pre-Mach 3). (mips*-*-mach3*, ns32k-*-mach3*): Fix file names. * config/mips/mipsel64.mt: Remove, never referenced. Mon Jan 19 14:01:28 1998 Stan Shebs * top.c (print_gdb_version): Restore to original message. Mon Jan 19 13:34:40 1998 Ian Lance Taylor From cgf@bbc.com (Chris Faylor): * win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to let the child exit. (child_kill_inferior): Respond to all debug events as the child is terminating. * Makefile.in (all): Change gdb dependency to gdb$(EXEEXT). (uninstall): Add $(EXEEXT) to file name to remove. (gdb$(EXEEXT)): Rename target from plain gdb. (gdb1$(EXEEXT)): Rename target from plain gdb1. (clean, mostlyclean): Add $(EXEEXT) to binary names to remove. 1998-01-16 Felix Lee * top.c (print_gdb_version): delete stutter. Thu Jan 15 12:29:13 1998 Nick Clifton * remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com to prevent spurous error messages on non-ICE targets. Wed Jan 14 19:27:02 1998 Stan Shebs * config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}: Remove, no longer used. start-sanitize-d30v Wed Jan 14 18:11:26 1998 Michael Meissner Patch from Jim Wilson. * d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly declare void function before use. * config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}. end-sanitize-d30v Tue Jan 13 16:38:48 1998 Fred Fish * configure.in (--with-mmalloc): Add new configure arg to use the mmalloc package. Default is to not use it. (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not the string "2". * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef. * configure: Regenerated. * config.in: Regenerated. * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove. (MMALLOC): Set using configure. (MMALLOC_CFLAGS): Set using configure. * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather than just defining it. * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC. * utils.c (NO_MMALLOC): Use USE_MMALLOC instead. * objfiles.c: ditto. * defs.h: ditto. * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove. * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove. * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove. * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove. * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove. * gdbserver/Makefile.in (MMALLOC_*): Remove. * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove. * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove. * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove. Mon Jan 12 11:46:51 1998 Michael Snyder (msnyder@cleaver.cygnus.com) * config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7 default to void pointer type (so that their default radix is hex). * symtab.c: move rbreak_command from no_class to class_breakpoint so it will be listed under "help breakpoints". Sat Jan 10 14:58:04 1998 Stan Shebs * rdi-share/hostchan.c: Remove gettimeofday declaration. Thu Jan 8 11:03:59 1998 Nick Clifton * remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com to implement the Angel remote debugging interface. * Makefile.in: Add build rules for remote-rdi.c and rdi-share/libangsd.a. * configure.tgt: Updated from source on branch. * config/arm/tm-arm.h: Updated from source on branch. * arm-tdep.c: Updated from source on branch. * rdi-share: New directory, RDI library contributed by ARM. Mon Jan 5 20:21:59 1998 Mark Alexander * monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define. * monitor.c (monitor_wait): Echo program output. * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag, add MO_PRINT_PROGRAM_OUTPUT flag. Mon Jan 5 18:21:11 1998 David Taylor * top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is defined. * top.c (return_to_top_level, catch_errors): use the new macros * main.c (SET_TOP_LEVEL): ditto. * config/xm-sysv4.h (HAVE_SIGSETJMP): Define. Fri Jan 2 18:48:58 1998 Mark Alexander * configure.in: Double up brackets in shell case pattern. Fri Jan 2 17:06:05 1998 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c (finish_tfind_command): improved algorithm for deciding when we've "stepped" into a new stack frame. (map_args_over_tracepoints): loop over tracepoint list "safely", since list elements may be deleted during loop. (read_actions): add actions to history list. For older changes see ChangeLog-97 Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: