2013-04-23 Hui Zhu PR gdb/15293 * breakpoint.c (bpstat_what): Add BPSTAT_WHAT_SINGLE to bp_dprintf. 2013-04-23 Hui Zhu PR gdb/15165 * breakpoint.c (dprintf_print_recreate): New. (save_breakpoints): Let it not save dprintf commands. (initialize_breakpoint_ops): Set dprintf_print_recreate. 2013-04-22 Tom Tromey PR gdb/7912: * Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. 2013-04-22 Edjunior Machado * remote-sim.c (dump_mem): Change the type of 'buf' parameter from 'char *' to 'gdb_byte *'. (gdbsim_store_register): Change the type of 'tmp' from 'char' to 'gdb_byte'. 2013-04-22 Yao Qi * infrun.c: Fix typo in comment. 2013-04-22 Andrew Haley * arm-tdep.c (BranchDest): Cast result as "unsigned long", instead of "long". 2013-04-20 Yao Qi * ctf.c (ctf_fetch_registers): Change the type of 'regs' from 'char *' to 'gdb_byte *'. Cast the return value of 'bt_ctf_get_char_array' to 'gdb_byte *'. 2013-04-19 Pedro Alves * configure.ac (build_warnings): Replace -Wno-pointer-sign with -Wpointer-sign. * configure: Regenerate. 2013-04-19 Pedro Alves * ser-tcp.c (net_read_prim): Cast second argument to recv to 'void *'. 2013-04-19 Pedro Alves * monitor.c (monitor_write_memory, monitor_write_memory_bytes): Change type of 'myaddr' parameter to gdb_byte pointer. (monitor_write_memory_longlongs): Likewise. Cast 'myaddr' pointer to 'long long' pointer instead of to 'unsigned long long'. (monitor_write_memory_block, monitor_read_memory_single) (monitor_read_memory): Change type of 'myaddr' parameter to gdb_byte pointer. 2013-04-19 Pedro Alves * record.c (validate_history_size): Make parameter 'setting' unsigned. 2013-04-19 Pedro Alves * ctf.c (ctf_write_uploaded_tsv, ctf_write_uploaded_tp): Add casts to 'gdb_byte *'. 2013-04-19 Pedro Alves * cp-valprint.c (cp_print_class_member): Change type of 'fieldno' local to int. 2013-04-19 Pedro Alves * ada-lang.c (print_it_exception): Add cast to gdb_byte *. * ada-tasks.c (read_fat_string_value): Likewise. 2013-04-19 Pedro Alves * dwarf2-frame.c (execute_cfa_program): Make 'bytes_read' local unsigned. Pass 'tmp' to safe_read_uleb128 instead of the signed 'offset', and adjust. 2013-04-19 Pedro Alves * dwarf2read.c (dwarf2_get_dwz_file): Add cast to const char *. (read_index_from_section): Add cast to 'char *'. 2013-04-19 Pedro Alves * xcoffread.c (xcoff_initial_scan): Add cast to 'char *'. 2013-04-19 Pedro Alves * coff-pe-read.c (read_pe_exported_syms): Handle strings as char. 2013-04-19 Pedro Alves * record-full.c (record_full_get_bookmark): Change local 'ret' type to char * and add cast to gdb_byte *. (record_full_goto_bookmark): Handle 'bookmark' argument as a string. * reverse.c (goto_bookmark_command): Add casts to gdb_byte *. 2013-04-19 Pedro Alves * python/py-inferior.c (infpy_write_memory): Add cast to gdb_byte * python/py-prettyprint.c (print_string_repr): Change type of 'output' local to char *. Add cast to gdb_byte * in LA_PRINT_STRING call. (print_children): Change type of 'output' local to char *. * python/py-value.c (valpy_string): Add cast to const char * in PyUnicode_Decode call. 2013-04-19 Pedro Alves * remote-mips.c (mips_cksum): Rename 'data' parameter to 'datastr' and change its type to 'const char *'. Adjust. (mips_send_packet): Add cast to 'char *', and remove cast to 'unsigned char *'. (mips_receive_packet): Remove cast to 'unsigned char *'. (mips_load_srec): Use bfd_byte. (pmon_makeb64, pmon_zeroset): Make 'chksum' parameter unsigned. (pmon_checkset): Make 'value' parameter unsigned. 2013-04-19 Pedro Alves * common/agent.c (agent_run_command): Add cast to gdb_byte *. 2013-04-19 Pedro Alves * remote.c (remote_write_bytes_aux, compare_sections_command) (remote_read_qxfer) (remote_search_memory, remote_hostio_pwrite, remote_hostio_pread) (remote_hostio_readlink, remote_bfd_iovec_pread) (remote_set_trace_notes): Use gdb_byte when RSP buffer is used as binary buffer, and char when buffer is used as string. * tracepoint.c (encode_source_string, tfile_write_uploaded_tp) (trace_save, tfile_open, traceframe_walk_blocks) (tfile_fetch_registers): Likewise. 2013-04-19 Pedro Alves * ser-base.c (ser_base_write): Change prototype -- take 'void *' buffer and size_t size. Adjust. * ser-base.h (ser_base_write): Adjust. * ser-go32.c (cnts): Change type to size_t. (dos_write): Change prototype -- take 'void *' buffer and size_t size. Adjust. (dos_info): Print elements of 'cnts' as unsigned long. * serial.c (serial_write): Likewise. * serial.h (serial_write): Adjust. (struct serial_ops) : Change prototype -- take 'void *' buffer and size_t size. Adjust. 2013-04-19 Pedro Alves * c-lang.c (evaluate_subexp_c): Cast result of obstack_base to gdb_byte *. * linux-tdep.c (linux_make_mappings_corefile_notes): Likewise. 2013-04-19 Pedro Alves * alpha-tdep.c (alpha_extract_return_value): Use regcache_cooked_read_unsigned to read 'v0'. 2013-04-19 Pedro Alves * xtensa-tdep.c (execute_l32e, execute_s32e): Change type of parameters 'at', 'as' and 'offset' to uint32_t. 2013-04-19 Pedro Alves * aarch64-tdep.c (aarch64_analyze_prologue): Change type of local 'is64' to signed 'int'. 2013-04-19 Pedro Alves * s390-tdep.c (is_rs, is_rsy, is_rx, is_rxy): Change type of 'd2' parameter to int *. 2013-04-19 Pedro Alves * ppc-linux-tdep.c (ppc_skip_trampoline_code): Change local 'insnbuf' buffer type to unsigned int[]. 2013-04-19 Pedro Alves * mips-tdep.c (mips_read_pc): Change local 'pc' type to LONGEST. 2013-04-19 Pedro Alves * mep-tdep.c (mep_get_insn): Change 'insn' parameter type to unsigned long *. 2013-04-19 Pedro Alves * alpha-tdep.c (heuristic_fence_post): Change type to int. (alpha_heuristic_proc_start): Adjust to check -1 instead of UINT_MAX. * mips-tdep.c (heuristic_fence_post): Change type to int. (heuristic_proc_start): Adjust to check -1 instead of UINT_MAX. 2013-04-19 Pedro Alves * cris-tdep.c (usr_cmd_cris_version): Make unsigned. (struct gdbarch_tdep) : Make unsigned. (cris_spec_reg_applicable, cris_gdbarch_init): Adjust locals. 2013-04-19 Pedro Alves * avr-tdep.c (avr_io_reg_read_command): New local 'bufstr'. Use it to get a string view of the byte buffer. * i386-cygwin-tdep.c (core_process_module_section): Change local 'buf' type to gdb_byte *. Adjust. * linux-tdep.c (linux_info_proc, linux_find_memory_regions_full): Change local to char *. * solib-darwin.c (find_program_interpreter): Change return type to char *. Adjust. (darwin_solib_get_all_image_info_addr_at_init): Adjust. * solib-dsbt.c (enable_break2): Change local 'buf' to char *. * solib-frv.c (enable_break2): Change local 'buf' to char *. * solib-spu.c (spu_current_sos): Add gdb_byte * cast. * solib-svr4.c (find_program_interpreter): Change return type to char *. Adjust. (enable_break): Change local 'interp_name' to char *. * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'. * spu-tdep.c (spu_pseudo_register_read_spu): Add cast to 'char *'. (spu_pseudo_register_write_spu): Use char for string buffer. Adjust. (info_spu_event_command, info_spu_signal_command): Add casts to 'char *'. 2013-04-19 Pedro Alves * aarch64-tdep.c (aarch64_default_breakpoint): Change type to gdb_byte[]. (aarch64_breakpoint_from_pc): Change return type to gdb_byte *. * ada-lang.c (ada_value_assign): Use gdb_byte. * alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[]. (alphanbsd_sigtramp_offset): Use gdb_byte. * arm-linux-tdep.c (arm_linux_arm_le_breakpoint) (arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint) (eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint) (arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint) (arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[]. * arm-tdep.c (arm_stub_unwind_sniffer) (arm_displaced_init_closure): Use gdb_byte. (arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint) (arm_default_thumb_le_breakpoint) (arm_default_thumb_be_breakpoint): Change type to gdb_byte[]. * arm-tdep.h (struct gdbarch_tdep) : Change type to gdb_byte *. * arm-wince-tdep.c (arm_wince_le_breakpoint) (arm_wince_thumb_le_breakpoint): Change type to gdb_byte[]. * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint) (arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint) (arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[]. * armobsd-tdep.c (arm_obsd_thumb_le_breakpoint) (arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[]. * cris-tdep.c (push_stack_item, cris_push_dummy_call) (cris_store_return_value, cris_extract_return_value): Use gdb_byte. (constraint): Change type of parameter to char * from signed char*. Use gdb_byte. * dwarf2loc.c (read_pieced_value, write_pieced_value): Change type of local buffer to gdb_byte *. * dwarf2read.c (read_index_from_section): Use gdb_byte. (create_dwp_hash_table): Change type of locals to gdb_byte *. (add_address_entry): Change type of local buffer to gdb_byte[]. * frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr) (frv_push_dummy_call): Use gdb_byte. * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code) (hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide) (hppa_hpux_supply_save_state): Use gdb_byte. * hppa-tdep.c (hppa32_push_dummy_call) (hppa64_convert_code_addr_to_fptr): Use gdb_byte. * ia64-tdep.c (extract_bit_field, replace_bit_field) (slotN_contents, replace_slotN_contents): Change type of parameter to gdb_byte *. (fetch_instruction, ia64_pseudo_register_write) (ia64_register_to_value, ia64_value_to_register) (ia64_extract_return_value, ia64_store_return_value) (ia64_push_dummy_call): Use gdb_byte. * m32c-tdep.c (m32c_return_value): Remove cast. * m68hc11-tdep.c (m68hc11_pseudo_register_write) (m68hc11_push_dummy_call, m68hc11_store_return_value): Use gdb_byte. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte. * mn10300-tdep.c (mn10300_store_return_value) (mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use gdb_byte. * moxie-tdep.c (moxie_process_readu): Use gdb_byte. (moxie_process_record): Remove casts. * ppc-ravenscar-thread.c (supply_register_at_address) (ppc_ravenscar_generic_store_registers): Use gdb_byte. * ravenscar-thread.c (get_running_thread_id): Use gdb_byte. * remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte. * remote-mips.c (mips_xfer_memory): Use gdb_byte. * remote.c (compare_sections_command): Use gdb_byte. * score-tdep.c (score7_free_memblock): Change type of parameter to gdb_byte *. * sh-tdep.c (sh_justify_value_in_reg): Change return type to gdb_byte *. Use gdb_byte. (sh_push_dummy_call_fpu): Use gdb_byte. (sh_extract_return_value_nofpu, sh_extract_return_value_fpu) (sh_store_return_value_nofpu, sh_store_return_value_fpu) (sh_register_convert_to_virtual, sh_register_convert_to_raw): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte. * sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte. (sh64_store_return_value, sh64_register_convert_to_virtual): Change parameter type to 'gdb_byte *'. Use gdb_byte. (sh64_pseudo_register_write): Use gdb_byte. * solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'. * solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte buffer. (irix_current_sos): Use gdb_byte. * solib-som.c (som_current_sos): Use gdb_byte. * sparc-ravenscar-thread.c (supply_register_at_address) (sparc_ravenscar_generic_store_registers): Use gdb_byte. * spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'. * spu-tdep.c (spu_get_overlay_table): Use gdb_byte. * tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to 'gdb_byte *'. * tic6x-tdep.h (struct gdbarch_tdep) : Change type to 'gdb_byte *'. * tracepoint.c (tfile_fetch_registers): Use gdb_byte. * xstormy16-tdep.c (xstormy16_extract_return_value) (xstormy16_store_return_value): Change parameter type to 'gdb_byte *'. Adjust. (xstormy16_push_dummy_call): Use gdb_byte. * xtensa-tdep.c (xtensa_scan_prologue, call0_ret) (call0_analyze_prologue, execute_code): Use gdb_byte. 2013-04-19 Vladimir Kargov Pedro Alves * i387-tdep.c (i387_print_float_info): Use gdb_byte for pointer to value contents. 2013-04-17 Doug Evans * dwarf2read.c (struct signatured_type): New member type. (struct attribute): Replace member signatured_type with signature. (DW_SIGNATURE): Replaces DW_SIGNATURE_TYPE. (read_call_site_scope): Call follow_die_ref instead of follow_die_ref_or_sig. (read_structure_type): Rewrite handling of signatured types. (read_enumeration_type): Ditto. (read_attribute_value): Update. (build_error_marker_type): New function. (lookup_die_type): Add assert. Rewrite handling of signatured types. Don't call error for bad types, just build an error marker type. (dump_die_shallow): Update. (follow_die_sig_1): Renamed from follow_die_sig. Don't call error for bad types, instead return NULL. (follow_die_sig): New function. (get_signatured_type, get_DW_AT_signature_type): New functions. 2013-04-17 Yufeng Zhang * aarch64-tdep.c (aarch64_write_pc): Removed. (aarch64_gdbarch_init): Remove set_gdbarch_write_pc of the above function. 2013-04-17 Yao Qi * top.c (print_gdb_configuration): Print configure-time parameter on using libbabeltrace or not. 2013-04-16 Pedro Alves * copyright.py (EXCLUDE_LIST): Add gdb/common/glibc_thread_db.h. 2013-04-16 Pedro Alves * common/glibc_thread_db.h: Update from upstream glibc (git 568035b7874a099087b77f7bba3e36a1173787b0). 2013-04-16 Pedro Alves * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: Factor out to ... * common/glibc_thread_db.h: ... this new file ... * common/gdb_thread_db.h [!HAVE_THREAD_DB_H]: ... and include it. 2013-04-16 Will Newton Pedro Alves PR build/11881 * common/gdb_thread_db.h (LIBTHREAD_DB_SO) (LIBTHREAD_DB_SEARCH_PATH): Move outside of #ifdef HAVE_THREAD_DB_H. 2013-04-16 Pedro Alves Eli Zaretskii * NEWS: Mention "set foo unlimited". 2013-04-15 Doug Evans * dwarf2read.c (struct dwo_file): Replace member "cus" with "cu". (struct create_dwo_cu_data): Renamed from create_dwo_info_table_data. (create_dwo_cu_reader): Renamed from create_dwo_debug_info_hash_table_reader. (create_dwo_cu): Renamed from create_dwo_debug_info_hash_table. Remove support for multiple CUs in a DWO file. (open_and_init_dwo_file, lookup_dwo_cutu): Update. * dwarf2read.c (create_debug_types_hash_table): Use hex_string instead of phex. (lookup_dwo_unit, create_dwo_debug_info_hash_table_reader): Ditto. (create_dwo_in_dwp): Ditto. 2013-04-15 Tom Tromey * NEWS: Move recent entries into "since 7.6" section. 2013-04-15 Tom Tromey PR c++/13588: * NEWS: Update. * break-catch-throw.c (struct exception_catchpoint) : New fields. (fetch_probe_arguments, dtor_exception_catchpoint) (check_status_exception_catchpoint) (print_one_detail_exception_catchpoint): New functions. (handle_gnu_v3_exceptions): Add "except_rx" argument. Compile regular expression if needed. (extract_exception_regexp): New function. (catch_exception_command_1): Use extract_exception_regexp. (compute_exception): Use fetch_probe_arguments. (initialize_throw_catchpoint_ops): Set dtor, print_one_detail, and check_status fields. * cp-abi.c (cplus_typename_from_type_info): New function. * cp-abi.h (cplus_typename_from_type_info): Declare. (struct cp_abi_ops) : New field. * gdb_regex.h (compile_rx_or_error): Declare. * gnu-v3-abi.c (gnuv3_get_typename_from_type_info): Update comment. (init_gnuv3_ops): Set get_type_from_type_info field. * probe.c (compile_rx_or_error): Move... * utils.c (compile_rx_or_error): ... here. 2013-04-15 Tom Tromey PR c++/15176: * NEWS: Update. * break-catch-throw.c (compute_exception): New function. (exception_funcs): New global. (_initialize_break_catch_throw): Create $_exception. * cp-abi.c (cplus_type_from_type_info): New function. * cp-abi.h (cplus_type_from_type_info): Declare. (struct cp_abi_ops) : New field. * gnu-v3-abi.c (gnuv3_get_typename_from_type_info) (gnuv3_get_type_from_type_info): New functions. (init_gnuv3_ops): Set get_type_from_type_info ABI field. 2013-04-15 Tom Tromey * break-catch-throw.c (struct exception_names): New. (exception_functions): Change type. (re_set_exception_catchpoint): Look for SDT probes. 2013-04-15 Tom Tromey PR c++/10119: * break-catch-throw.c (exception_functions): New global. (gnu_v3_exception_catchpoint_ops): Move earlier. (struct exception_catchpoint): New. (classify_exception_breakpoint): Rewrite. (re_set_exception_catchpoint): New function. (handle_gnu_v3_exceptions): Return void. Use init_catchpoint. Allocate a struct exception_catchpoint. (catch_exception_command_1): Update. (initialize_throw_catchpoint_ops): Set 're_set' method. 2013-04-15 Tom Tromey * Makefile.in (SFILES): Add break-catch-throw.c (COMMON_OBS): Add break-catch-throw.o. * break-catch-throw.c: New file. * breakpoint.c: Move exception-catching code to new file. (ep_parse_optional_if_clause): No longer static. * breakpoint.h (ep_parse_optional_if_clause): Declare. 2013-04-15 Tom Tromey PR c++/9065: * NEWS: Update. * breakpoint.c (watchpoint_exp_is_const): Add OP_TYPEID. * c-exp.y (TYPEID): New token. (exp): Add new TYPEID productions. (ident_tokens): Add "typeid". * cp-abi.c (cplus_typeid, cplus_typeid_type): New functions. * cp-abi.h (cplus_typeid, cplus_typeid_type): Declare. (struct cp_abi_ops) : New fields. * eval.c (evaluate_subexp_standard) : New case. * expprint.c (dump_subexp_body_standard) : New case. * gnu-v3-abi.c (std_type_info_gdbarch_data): New global. (build_std_type_info_type, gnuv3_get_typeid_type) (gnuv3_get_typeid): New functions. (init_gnuv3_ops): Initialize std_type_info_gdbarch_data. Set new fields on ABI object. * parse.c (operator_length_standard) : New case. * std-operator.def (OP_TYPEID): New. 2013-04-15 Tom Tromey * elfread.c (elf_symtab_read): Install versioned symbol under unversioned name as well. 2013-04-15 Tom Tromey PR c++/11990: * c-lang.c (cplus_language_defn): Use gdb_demangle. * c-typeprint.c (c_type_print_base): Use gdb_demangle. * cp-support.c (mangled_name_to_comp): Use gdb_demangle. (gdb_demangle): New function. * cp-support.h (gdb_demangle): Declare. * dwarf2read.c (dwarf2_physname, fixup_partial_die) (dwarf2_name): Use gdb_demangle. * gdbtypes.c (check_stub_method): Use gdb_demangle. * gnu-v3-abi.c (gnuv3_rtti_type): Strip @plt and version suffixes from name. (gnuv3_print_method_ptr): Use gdb_demangle. * jv-lang.c (java_demangle): Use gdb_demangle. * jv-typeprint.c (java_type_print_base): Use gdb_demangle. * language.c (unk_lang_demangle): Use gdb_demangle. * symtab.c (symbol_find_demangled_name) (demangle_for_lookup): Use gdb_demangle. 2013-04-15 Tom Tromey PR c++/12824: * NEWS: Update. * breakpoint.c (enum exception_event_kind) : New constant. (classify_exception_breakpoint): New function. (print_it_exception_catchpoint, print_one_exception_catchpoint) (print_mention_exception_catchpoint) (print_recreate_exception_catchpoint, handle_gnu_v3_exceptions) (catch_exception_command_1): Handle "rethrow" catchpoint. (catch_rethrow_command): New function. (_initialize_breakpoint): Add "catch rethrow" command. 2013-04-15 Pierre Muller * contrib/ari/gdb_ari.sh (write_pc rule): Do not consider set_gdbarch_write_pc as deprecated anymore. 2013-04-15 Joel Brobecker * spu-tdep.c (spu_write_pc): Add empty line after local variable declarations. 2013-04-13 Yao Qi * ctf.c (_initialize_ctf): Include "completer.h". Call add_target_with_completer instead of add_target. 2013-04-12 Jan Kratochvil Fix GDB regression related to PR binutils/14813. * jit.c (mem_bfd_iovec_close): Return 0 for success. * minidebug.c (lzma_close): Add return value comment. * remote.c (remote_bfd_iovec_close): Return 0 for success. * solib-spu.c (spu_bfd_iovec_close): Likewise. * spu-linux-nat.c (spu_bfd_iovec_close): Likewise. 2013-04-12 Jan Kratochvil * config.in: Regenerate. 2013-04-12 Tom Tromey * dwarf2-frame.c (struct comp_unit) : Now const. * dwarf2read.c (struct dwarf2_section_info) : Now const. (struct die_reader_specs) : Likewise. (die_reader_func_ftype): Make 'info_ptr' const. (struct line_header) : Now const. (struct file_entry) : Likewise. (struct partial_die_info) : Likewise. (struct dwarf_block) : Likewise. (dwarf2_read_section): Remove cast. (dwarf2_get_section_info): Make 'bufp' const. (read_index_from_section): Constify. (dw2_get_file_names_reader): Make 'info_ptr' const. (dw2_get_primary_filename_reader): Likewise. (read_comp_unit_head): Make 'info_ptr' and return type const. (read_and_check_comp_unit_head, read_and_check_type_unit_head): Likewise. (read_abbrev_offset): Constify. (dwarf2_create_include_psymtab): Make 'name' const. (create_debug_types_hash_table): Update. (read_cutu_die_from_dwo): Make 'result_info_ptr' const. (init_cutu_and_read_dies, init_cutu_and_read_dies_no_follow): Constify. (process_psymtab_comp_unit_reader, build_type_psymtabs_reader) (load_partial_comp_unit_reader): Make 'info_ptr' const. (read_comp_units_from_section): Constify. (peek_abbrev_code, peek_die_abbrev, skip_children, skip_one_die) (locate_pdi_sibling, load_full_comp_unit_reader): Make 'info_ptr' const. (dwarf2_compute_name, setup_type_unit_groups): Constify. (create_dwo_debug_info_hash_table): Make 'info_ptr' const. (create_dwp_hash_table, dwarf2_ranges_read) (dwarf2_record_block_ranges): Constify. (read_die_and_children, read_die_and_siblings_1) (read_die_and_siblings): Make 'info_ptr' and 'new_info_ptr' const. (read_full_die_1, read_full_die): Make 'info_ptr' const. (abbrev_table_read_table): Constify. (load_partial_dies): Make 'info_ptr' const. (read_partial_die, read_attribute_value, read_attribute): Make 'info_ptr' and return type const. (read_address, read_initial_length) (read_checked_initial_length_and_offset, read_offset) (read_offset_1, read_n_bytes, read_direct_string): Make 'buf' const. (read_direct_string): Make 'buf' and return type const. (read_indirect_string_at_offset, read_indirect_string_from_dwz) (read_indirect_string): Make return type const. (read_unsigned_leb128, read_signed_leb128): Make 'buf' const. (read_addr_index_from_leb128, dwarf2_read_addr_index_reader): Make 'info_ptr' const. (read_str_index): Make return type const. (add_include_dir): Make 'include_dir' const. (add_file_name): Make 'name' const. (dwarf_decode_line_header): Constify. (psymtab_include_file_name): Make return type const. (dwarf_decode_lines_1, dwarf_decode_lines): Constify. (dwarf2_start_subfile): Make 'filename' const. (dwarf2_const_value_attr): Make 'bytes' const. (read_signatured_type_reader): Make 'info_ptr' const. (decode_locdesc): Constify. (skip_form_bytes): Make 'bytes', 'buffer_end', and return type const. (skip_unknown_opcode): Make 'opcode_definitions', 'mac_ptr', 'mac_end', and return type const. (dwarf_parse_macro_header): Make 'mac_ptr' and return type const. (dwarf_decode_macro_bytes): Make 'mac_ptr', 'mac_end', and return type const. (per_cu_header_read_in): Constify. * symfile.h (dwarf2_get_section_info): Update. 2013-04-12 Tom Tromey * symtab.h (struct general_symbol_info) : Make const. 2013-04-12 Eli Zaretskii * NEWS: Mention "show configuration", --configuration. * top.c (print_gdb_configuration): New function, displays the details about GDB configure-time parameters. (print_gdb_version): Mention "show configuration". * cli/cli-cmds.c (show_configuration): New function. (_initialize_cli_cmds): Add the "show configuration" command. * main.c (captured_main) : New static var. : Use it. If --configuration was given, call print_gdb_configuration. 2013-04-11 Jan Kratochvil Pedro Alves * Makefile.in (HAVE_NATIVE_GCORE_TARGET): New. (generated_files): Add gcore. (install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or HAVE_NATIVE_GCORE_HOST. (gcore): New. * NEWS (Changes since GDB 7.6): Mention newly installed gcore. * config/alpha/alpha-osf3.mh, config/i386/fbsd.mh, config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh, config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh, config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh: Add HAVE_NATIVE_GCORE_HOST. * configure: Regenerate. * configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it. New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME. New AC_CONFIG_FILES for gcore. * configure.tgt: Add gdb_have_gcore to the initial comment. Set gdb_have_gcore. * gdb_gcore.sh: Rename to ... * gcore.in: ... here. Remove gcore.sh comment. Use GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME substitutions. Fix parsing tabs in ${gdb_target_obs}. * configure.tgt (gdb_have_gcore): Replace case with for and if. 2013-04-11 Jan Kratochvil * remote.c (unpush_and_perror): Add output message final dot. 2013-04-11 Yao Qi * tracepoint.c (tfile_interp_line): Fit parameters line and utpp in one line. 2013-04-10 Joel Brobecker * solib.c (solib_map_sections): Remove code overwriting SO->SO_NAME with the bfd's filename. 2013-04-10 Pedro Alves * cli/cli-decode.c (integer_unlimited_completer): New function. (add_setshow_integer_cmd, add_setshow_uinteger_cmd) (add_setshow_zuinteger_unlimited_cmd): Install the "unlimited" completer. * cli/cli-setshow.c: Include "cli/cli-utils.h". (is_unlimited_literal): New function. (do_set_command): Handle literal "unlimited" arguments. * frame.c (_initialize_frame) : Document "unlimited". * printcmd.c (_initialize_printcmd) : Add help text. * record-full.c (_initialize_record_full) : Likewise. * record.c (_initialize_record) : Add help text. * ser-tcp.c (_initialize_ser_tcp) : Add help text. * tracepoint.c (_initialize_tracepoint) : Likewise. * source.c (_initialize_source) : Add help text. * utils.c (initialize_utils) : Likewise. : Mention "set height unlimited". * valprint.c (_initialize_valprint) : Document "unlimited". 2013-04-10 Pedro Alves * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching. 2013-04-10 Hui Zhu Yao Qi * configure.ac: Check libbabeltrace is installed. * config.in: Regenerate. * configure: Regenerate. * Makefile.in (LIBBABELTRACE): New. (CLIBS): Add LIBBABELTRACE. * ctf.c: Include "exec.h". (CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros. (CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros. (ctf_save_metadata_header): Define new type aliases in metadata. (ctf_write_header): Define event type "tsv_def" and "tp_def" in metadata. Start a new faked packet for trace status. (ctf_write_status): Write trace status to CTF. (ctf_write_uploaded_tsv): Write TSV to CTF. (ctf_write_uploaded_tp): Write tracepoint definition to CTF. (ctf_write_definition_end): End the faked packet. (ctx, ctf_iter, trace_dirname): New. (start_pos): New variable. (ctf_destroy, ctf_open_dir, ctf_open): New. (SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New macros. (ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New. (ctf_fetch_registers, ctf_xfer_partial): New. (ctf_get_trace_state_variable_value): New. (ctf_get_tpnum_from_frame_event): New. (ctf_get_traceframe_address): New. (ctf_trace_find, ctf_has_stack): New. (ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New. (ctf_get_trace_status, ctf_read_status): New. (_initialize_ctf): New. * tracepoint.c (get_tracepoint_number): New (get_uploaded_tsv): Remove 'static'. (struct traceframe_info, trace_regblock_size): Move it to ... * tracepoint.h: ... here. (get_tracepoint_number): Declare it. (get_uploaded_tsv): Declare it. * NEWS: Mention new configure option. 2013-04-10 Pedro Alves Hui Zhu * breakpoint.c (dprintf_re_set): New. (initialize_breakpoint_ops): Set dprintf_breakpoint_ops re_set to dprintf_re_set. 2013-04-09 Joel Brobecker * configure.tgt (gdb_target_obs) : Remove solib-svr4.o from the list. 2013-04-09 Joel Brobecker * varobj.c (update_dynamic_varobj_children) [!HAVE_PYTHON]: Use gdb_assert_not_reached instead of invalid boolean expression. 2013-04-09 Pedro Alves * remote.c (unpush_and_perror): New function. (readchar, remote_serial_write): Use it. 2013-04-09 Markus Metzger * NEWS: Mention new btrace RSP packets. 2013-04-08 Tom Tromey * symmisc.c (dump_msymbols): Cast fprintf_filtered argument to long. 2013-04-08 Tom Tromey * maint.c (print_bfd_section_info): Print the section index. * symmisc.c (dump_msymbols): Print the section index. 2013-04-08 Tom Tromey PR symtab/8424: * blockframe.c (find_pc_partial_function_gnu_ifunc): Check SYMBOL_SECTION, not SYMBOL_OBJ_SECTION. * breakpoint.c (resolve_sal_pc): Update. * elfread.c (elf_gnu_ifunc_record_cache): Update. * findvar.c (struct minsym_lookup_data) : New field. (minsym_lookup_iterator_cb): Use it. (default_read_var_value): Update. * hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline): Update. * infcmd.c (jump_command): Update. * linespec.c (minsym_found): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (lookup_minimal_symbol_by_pc_section_1): Update. (prim_record_minimal_symbol_full): Don't set SYMBOL_OBJ_SECTION. * parse.c (write_exp_msymbol): Update. * printcmd.c (address_info): Update. * psymtab.c (find_pc_sect_psymbol): Update. (fixup_psymbol_section): Check SYMBOL_SECTION, not SYMBOL_OBJ_SECTION. (add_psymbol_to_bcache): Correctly initialize SYMBOL_SECTION. Don't initialize SYMBOL_OBJ_SECTION. * spu-tdep.c (spu_catch_start): Update. * stabsread.c (define_symbol): Don't set SYMBOL_SECTION. * symmisc.c (dump_msymbols, print_symbol): Update. * symtab.c (fixup_section): Don't set 'obj_section'. Change how fallback section is computed. (fixup_symbol_section): Update. (find_pc_sect_symtab, find_function_start_sal, skip_prologue_sal): Update. (allocate_symbol, initialize_symbol, allocate_template_symbol): Initialize SYMBOL_SECTION. * symtab.h (struct general_symbol_info)
: Update comment. : Remove. (SYMBOL_OBJ_SECTION): Add 'objfile' argument. Rewrite. (SYMBOL_OBJFILE): New macro. 2013-04-08 Tom Tromey * coffread.c (record_minimal_symbol): Update. * dbxread.c (record_minimal_symbol): Update. * elfread.c (record_minimal_symbol): Update. * machoread.c (macho_symtab_add_minsym): Update. * mdebugread.c (record_minimal_symbol, parse_partial_symbols): Update. * minsyms.c (prim_record_minimal_symbol): Update. (prim_record_minimal_symbol_full): Remove 'bfd_section' argument. (prim_record_minimal_symbol_and_info): Likewise. * minsyms.h (prim_record_minimal_symbol_full) (prim_record_minimal_symbol_and_info): Update. * symtab.c (allocate_symbol, initialize_symbol) (allocate_template_symbol): Initialize SYMBOL_SECTION. * xcoffread.c (record_minimal_symbol, scan_xcoff_symtab): Update. 2013-04-08 Tom Tromey PR symtab/8423: * solib-som.c (som_solib_section_offsets): Use BFD section indices. Set offsets for all sections. * somread.c (som_symtab_read): Compute BFD section for symbol. Use prim_record_minimal_symbol_and_info. (som_symfile_read): Fix comment. (struct find_section_offset_arg): New. (find_section_offset, set_section_index): New functions. (som_symfile_offsets): Use set_section_index to compute section indices. 2013-04-08 Tom Tromey * coffread.c (cs_to_section): Use gdb_bfd_section_index. * elfread.c (record_minimal_symbol, elf_symtab_read): Use gdb_bfd_section_index. * gdb_bfd.c (gdb_bfd_section_index, gdb_bfd_count_sections): New functions. * gdb_bfd.h (gdb_bfd_section_index, gdb_bfd_count_sections): Declare. * machoread.c (macho_symtab_add_minsym, macho_symfile_offsets): Update. * objfiles.c (add_to_objfile_sections_full): New function. (add_to_objfile_sections): Use it. (build_section_table): Rewrite. (objfile_relocate1): Use gdb_bfd_section_index. Update. * objfiles.h (obj_section_offset): Use gdb_bfd_section_index. (struct objfile) : Update comment. (ALL_OBJFILE_OSECTIONS): Skip sections where the_bfd_section is NULL. (ALL_OBJSECTIONS): Use it. * solib-dsbt.c (dsbt_relocate_main_executable): Update. * solib-frv.c (frv_relocate_main_executable): Update. * solib-target.c (solib_target_relocate_section_addresses): Use gdb_bfd_section_index. * symfile.c (build_section_addr_info_from_section_table): Use gdb_bfd_section_index. (build_section_addr_info_from_bfd, place_section): Likewise. * symtab.c (fixup_section): Update. * xcoffread.c (find_targ_sec): Use gdb_bfd_section_index. 2013-04-08 Tom Tromey * minsyms.h (struct bound_minimal_symbol): New. (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol. Remove objfile argument. (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc): Return bound_minimal_symbol. * minsyms.c (lookup_minimal_symbol_by_pc_1) (lookup_minimal_symbol_by_pc_section, lookup_minimal_symbol_by_pc): Return bound_minimal_symbol. (in_gnu_ifunc_stub): Update. (lookup_minimal_symbol_and_objfile): Return bound_minimal_symbol. Remove 'objfile_p' argument. (lookup_solib_trampoline_symbol_by_pc): Update. * ada-tasks.c, amd64-windows-tdep.c, arm-tdep.c, arm-wince-tdep.c, block.c, blockframe.c, breakpoint.c, btrace.c, c-valprint.c, dwarf2loc.c, elfread.c, frame.c, frv-tdep.c, glibc-tdep.c, gnu-v2-abi.c, gnu-v3-abi.c, hppa-hpux-tdep.c, i386-tdep.c, ia64-tdep.c, infcall.c, infcmd.c, jit.c, linux-fork.c, m32c-tdep.c, m68hc11-tdep.c, maint.c, mips-tdep.c, p-valprint.c, parse.c, ppc-linux-tdep.c, ppc-sysv-tdep.c, printcmd.c, rs6000-tdep.c, sh64-tdep.c, stack.c, symtab.c, tui/tui-disasm.c: Update. 2013-04-08 Tom Tromey * ada-lang.c (ada_decode_symbol): Check and set 'ada_mangled'. Use symbol's obstack, not an objfile. * coffread.c (process_coff_symbol): Update. * dwarf2read.c (fixup_go_packaging, new_symbol_full): Update. * jv-lang.c (add_class_symbol): Update. * mdebugread.c (new_symbol): Update. * minsyms.c (prim_record_minimal_symbol_full) (terminate_minimal_symbol_table): Update. * psymtab.c (add_psymbol_to_bcache): Clear entire symbol. Update. * stabsread.c (define_symbol, read_enum_type): Update. * symtab.c (symbol_set_demangled_name, symbol_get_demangled_name): Handle Ada specially. (symbol_set_language): Add 'obstack' argument. (symbol_set_names): Update. (symbol_natural_name, symbol_demangled_name): Always use ada_decode_symbol. * symtab.h (struct general_symbol_info) : New field. : New field. (SYMBOL_SET_LANGUAGE): Add 'obstack' argument. (symbol_set_language): Update. 2013-04-08 Tom Tromey * symtab.c (symbol_init_cplus_specific, symbol_set_demangled_name): Take an obstack, not an objfile. (symbol_set_names): Update. * symtab.h (symbol_set_demangled_name): Update. 2013-04-08 Tom Tromey * coffread.c (process_coff_symbol, coff_read_enum_type): Call allocate_symbol. * dwarf2read.c (fixup_go_packaging): Call allocate_symbol. (read_func_scope): Call allocate_template_symbol. (new_symbol_full): Call allocate_symbol. * jit.c (finalize_symtab): Call allocate_symbol. * jv-lang.c (add_class_symbol): Call allocate_symbol. * mdebugread.c (parse_symbol, new_block): Call allocate_symbol. * stabsread.c (patch_block_stabs, define_symbol, read_enum_type) (common_block_end): Call allocate_symbol. * symtab.c (allocate_symbol, initialize_symbol) (allocate_template_symbol): New functions. * symtab.c (allocate_symbol, initialize_symbol) (allocate_template_symbol): Declare. * xcoffread.c (process_xcoff_symbol): Call initialize_symbol. 2013-04-08 Pedro Alves Keith Seitz * breakpoint.c (create_breakpoint): Rename "parse_condition_and_thread" parameter to "parse_arg". Update describing comment. If !PARSE_ARG, then error out if ARG is not the empty string after extracting the location. * breakpoint.h (create_breakpoint): Rename "parse_condition_and_thread" parameter to "parse_arg". 2013-04-08 Aleksandar Ristovski * remote.c (remote_trace_find): Change type of parameters 'addr1' and 'addr2' to CORE_ADDR. * target.c (update_current_target): Update. * target.h (struct target_ops) : Change parameter type to CORE_ADDR. * tracepoint.c (tfind_1): Change type of parameters 'addr1' and 'addr2' to CORE_ADDR. (tfile_trace_find): Likewise. (tfile_get_traceframe_address): Change return type to CORE_ADDR. Change local variable 'addr' to type CORE_ADDR. * tracepoint.h (tfind_1): Update declaration. 2013-04-06 Eli Zaretskii * windows-nat.c (windows_get_absolute_argv0): Move from here... * mingw-hdep.c (windows_get_absolute_argv0): ...to here. Include main.h. * windows-nat.h (windows_get_absolute_argv0): Move prototype from here... * main.h (windows_get_absolute_argv0): ...to here. 2013-04-05 Doug Evans * dwarf2read.c (struct dwarf2_per_objfile): Tweak comment. (read_cutu_die_from_dwo): Add comments. (read_structure_type): Update comment. (read_enumeration_type, read_namespace_type): Update comment. (read_die_type, get_die_type_at_offset, get_die_type): Update comment. 2013-04-05 Jan Kratochvil Convert man pages to texinfo, new gdbinit.5 texinfo page. * Makefile.in (gdb.z): Remove. (install-only): Remove $(man1dir) and gdb.1 installation. * gdb.1: Remove. 2013-04-05 Jan Kratochvil Fix compatibility with Linux kernel 3.8.3. * linux-tdep.c (linux_find_memory_regions_full): Move variable number to more inner block. Remove parsing of NUMBER from outer block. Parse NUMBER only if KEYWORD has been identified. 2013-04-05 Jan Kratochvil Fix variable name shadowing. * linux-tdep.c (linux_find_memory_regions_full): Rename outer variable filename to mapsfilename and update its uses. 2013-04-05 Eli Zaretskii * Makefile.in (TAGS): Avoid warning from etags when $GDB_NM_FILE is empty. See http://sourceware.org/ml/gdb-patches/2012-08/msg00504.html and http://sourceware.org/ml/gdb-patches/2013-04/msg00055.html for details of the problem. 2013-04-04 Pedro Alves Hui Zhu * breakpoint.c (validate_commands_for_breakpoint): If validating a tracepoint, reset its STEP_COUNT and call validate_actionline. 2013-04-03 Doug Evans * dwarf2read.c (read_die_and_siblings_1): Renamed from read_die_and_siblings. (read_die_and_siblings): New function. (read_cutu_die_from_dwo): Dump die if requested. (read_die_and_children): Call read_full_die_1 and read_die_and_siblings_1. (read_full_die): Dump die if requested. * dwarf2read.c (read_comp_units_from_section): Add debugging printf. * dwarf2read.c (struct dwo_file): New member comp_dir. Rename member name to dwo_name. All uses updated. (hash_dwo_file): Include comp_dir in computation. (eq_dwo_file): Ditto. (lookup_dwo_file_slot): New arg comp_dir. All callers updated. (create_dwo_in_dwp, lookup_dwo_in_dwp, open_and_init_dwo_file): Ditto. * psymtab.c (read_psymtabs_with_fullname): Don't call psymtab_to_fullname if the basenames are different. 2013-04-03 Jan Kratochvil * NEWS (Changes in GDB 7.6): Update the data-disassemble for "fullname". New entry about "fullname" presence. 2013-04-03 Pedro Alves * NEWS: Mention x86_64/Cygwin as new native configuration. 2013-04-02 Doug Evans * dwarf2read.c (read_structure_type): Fix typo in comment. 2013-04-02 Pedro Alves * NEWS: Mention "set/show debug aarch64", "set/show debug coff-pe-read" and "set/show debug mach-o". 2013-04-02 Pedro Alves * NEWS: Mention "set/show remote trace-buffer-size-packet". 2013-04-02 Eli Zaretskii * Makefile.in (HFILES_NO_SRCDIR): Remove call-cmds.h. gdb_string.h is now in common/. 2013-04-02 Pedro Alves * NEWS: Move "set debug notification" and "set trace-buffer-size" under "New options". 2013-04-02 Jan Kratochvil Revert this patch: PR gdb/15275 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH. 2013-04-02 Pedro Alves PR gdb/15275 * remote.c (send_interrupt_sequence): Use remote_serial_write. (remote_serial_write): New function. (putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write. 2013-04-01 Jiong Wang * NEWS: Mention TILE-Gx in "New native configurations" and "New targets" sections. 2013-04-01 Doug Evans * dwarf2read.c (lookup_signatured_type_at_offset): Delete. (process_enumeration_scope): Simplify. * dwarf2read.c (struct dwarf2_per_cu_data): Move member type_unit_group ... (struct signatured_type): ... to here. (sig_type_ptr): New typedef. (type_unit_group): Delete member 't.first_cu'. Move member 'tus' out of union 't'. All uses updated. (dw2_get_file_names_reader): Assert not called for a type unit. (dw2_get_file_names): Assert not called for a type unit or type unit group. (build_type_psymtabs_reader): Assert called for a type unit. (build_type_psymtab_dependencies): Assert called for a type unit group. * dwarf2read.c (free_dwo_file): Add comment. (dwarf2_per_objfile_free): Unref dwp bfd. 2013-04-01 Aleksandar Ristovski * coff-pe-read.c (add_pe_exported_sym): Remove unused 'dll_name_len'. (add_pe_forwarded_sym): Remove unused 'section', 'dll_name_len'. (read_pe_exported_syms): Remove unused 'exportix'. (pe_text_section_offset): Remove unused 'opthdr_ofs', 'num_entries', 'export_rva', 'export_size', 'expptr', 'exp_funcbase', 'expdata', 'erva', 'name_rvas', 'ordinals', 'nexp', 'ordbase', 'dll_name'. 2013-04-01 Aleksandar Ristovski * breakpoint.c (parse_cond_to_aexpr): Remove unused 'old_chain'. (print_it_watchpoint): Remove unused 'bl'. (say_where): Remove unused 'uiout'. (bpstat_remove_breakpoint_callback): Remove unused 'uiout'. (bkpt_breakpoint_hit): Remove unused 'b'. (internal_bkpt_print_it): Remove unused 'uiout'. * buildsym.c (augment_type_symtab): Remove unused 'i'. 2013-03-31 Tiago Stürmer Daitx * ppc-sysv-tdep.c (ppc64_sysv_abi_push_float): New function. (ppc64_sysv_abi_push_dummy_call): Handle complex arguments. 2013-03-29 Doug Evans * dwarf2read.c (open_dwo_file): Renamed from open_dwop_file. Delete arg is_dwp. All callers updated. (open_dwp_file): New function. (open_and_init_dwp_file): Call it. (get_dwp_file): New function. (lookup_dwo_cutu): Call it. * dwarf2read.c (open_and_init_dwp_file): Remove incorrect, and unnecessary, cleanup. * dwarf2read.c (lookup_dwo_cutu): Improve complaint text. * dwarf2read.c (read_cutu_die_from_dwo): New function. (lookup_dwo_unit): New function. (init_cutu_and_read_dies): Move DWO handling to new functions. * dwarf2read.c (struct signatured_type): Tweak comment. (struct dwo_unit): Tweak comment. (create_debug_types_hash_table): Tweak comment. Reformat long line. (create_dwo_debug_info_hash_table): Tweak comment. (dwarf2_per_cu_offset_and_type): Tweak comment. * dwarf2read.c (lookup_signatured_type): Remove complaint about missing .debug_types section. 2013-03-29 Yao Qi * corelow.c: Include "completer.h". (_initialize_corelow): Call add_target_with_completer with argument 'filename_completer'. * tracepoint.c: Likewise. * exec.c (_initialize_exec): Likewise. * target.c (add_target): Rename to ... (add_target_with_completer): ... this. Call set_cmd_completer if parameter completer is not NULL. (add_target): New. * target.h: Include "command.h". (add_target_with_completer): Declare it. 2013-03-28 Joel Brobecker * coffread.c (is_import_fixup_symbol): New function. (record_minimal_symbol): Use is_import_fixup_symbol to detect import fixup symbols, and discard them. 2013-03-28 Doug Evans * dwarf2read.c (create_debug_types_hash_table): Don't allocate the types hash table until we know we need it. * dwarf2read.c (create_addrmap_from_index): Complain about bad CU index numbers. * dwarf2read.c (dw2_get_file_names): Delete arg "objfile". All callers updated. (dw2_print_stats): Print #read CUs too. (dump_die_shallow): Print signatured types better. * dwarf2read.c (struct dwarf2_per_cu_data): Rename member info_or_types_section to section. All uses updated. (struct dwo_unit): Ditto. 2013-03-28 Pedro Alves * NEWS (New options): New section. (New options): Mention set/show remote trace-status-packet. * remote.c (PACKET_qTStatus): New enumeration value. (remote_get_trace_status): Skip sending qTStatus if the packet is disabled. Use packet_ok. (_initialize_remote): Register a configuration command for qTStatus packet. 2013-03-28 Doug Evans * symfile.c (find_separate_debug_file): Add comment. (terminate_after_last_dir_separator): Tweak comment. * dwarf2read.c (create_partial_symtab): Add forward decl. (create_partial_symtab): Move to be closer to other psymtab functions. (process_psymtab_comp_unit_reader, process_psymtab_comp_unit): Ditto. * dwarf2read.c (dwarf2_physname): Move declaration to better spot. (compute_symtab_includes): Remove unnecessary forward declaration. (die_needs_namespace): Add comment marking group of functions for dwarf2 name computation. * typeprint.c (_initialize_typeprint): Improve type help text. * python/python.c (finish_python_initialization): Provide suggestion for how to tell gdb to find its python files. 2013-03-28 Pedro Alves PR gdb/15294 * source.c (_initialize_source): Change back "set listsize" to an integer command. 2013-03-27 Gareth McMullin PR gdb/15275 * remote.c (remote_get_trace_status): Include putpkt in TRY_CATCH. 2013-03-27 Pedro Alves * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust. 2013-03-27 Pedro Alves * coff-pe-read.c (_initialize_coff_pe_read): Rename "set debug coff_pe_read" command to "set debug coff-pe-read". 2013-03-27 Markus Metzger * record.c (command_size_to_target_size): Fix size comparison. Change parameter type from pointer to integer to integer. Update all users. 2013-03-27 Pierre Muller * windows-nat.c (handle_output_debug_string): Avoid typecast from integer of different size warning. 2013-03-26 Joel Brobecker * windows-nat.c (handle_output_debug_string): Add empty line after local block variable definition. 2013-03-26 Pedro Alves * ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned. (net_open): Make 'polls' local unsigned. 2013-03-26 Pedro Alves * remote.c (_initialize_remote): Make "set remoteaddresssize" a zuinteger command instead of uinteger. 2013-03-26 Pedro Alves * record-full.c (record_full_insn_num): Make it unsigned. (record_full_check_insn_num, record_full_message) (record_full_registers_change, record_full_xfer_partial): Remove record_full_insn_max_num check (it's always != 0). (record_full_info, record_full_restore): Use %u as format string. (): Use %u as format string. (set_record_full_insn_max_num): Remove record_full_insn_max_num check (it's always != 0). 2013-03-26 Pedro Alves * dcache.c (_initialize_dcache): Make the "set dcache line-size" and "set dcache size" commands zuinteger instead of uinteger. 2013-03-26 Pedro Alves * cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version" command zuinteger instead of uinteger. 2013-03-26 Pedro Alves * coff-pe-read.c (_initialize_coff_pe_read): Make the command zuinteger instead of uinteger. 2013-03-26 Pedro Alves * record.c (record_insn_history_size_setshow_var) (record_call_history_size_setshow_var): New globals. (command_size_to_target_size): New function. (cmd_record_insn_history, cmd_record_call_history): Use command_size_to_target_size instead of cast. (validate_history_size, set_record_insn_history_size) (set_record_call_history_size): New functions. (_initialize_record): Install set_record_insn_history_size and set_record_call_history_size as "set" hooks of "set record instruction-history-size" and "set record function-call-history-size". 2013-03-26 Pedro Alves * top.c (gdb_rl_operate_and_get_next): Replace max_input_history use with history_max_entries use. Remove FIXME note. 2013-03-26 Markus Metzger * record-btrace.c (record_btrace_close): Call record_btrace_auto_disable. 2013-03-25 Joel Brobecker * rs6000-nat.c (fixup_breakpoints): Delete declaration. 2013-03-25 Doug Evans * contrib/cc-with-tweaks.sh: Check exit code of dwp. 2013-03-25 Tom Tromey PR symtab/11462: * c-exp.y (exp): Add new productions for destructors after '.' and '->'. (write_destructor_name): New function. 2013-03-25 Tom Tromey PR c++/9197: * opencl-lang.c (evaluate_subexp_opencl) : Use value_struct_elt, not lookup_struct_elt_type. * eval.c (evaluate_subexp_standard) : Use value_struct_elt, not lookup_struct_elt_type. * expression.h (EVAL_AVOID_SIDE_EFFECTS): Update comment. 2013-03-25 Yao Qi * ctf.c [USE_WIN32API]: Undef 'mkdir' and use 'mkdir' instead of '_mkdir'. 2013-03-23 Eli Zaretskii * windows-nat.c (windows_get_absolute_argv0): New function. * windows-nat.h: Add its prototype. * main.c (get_init_files): Use filename_ncmp instead of strncmp. Use IS_DIR_SEPARATOR instead of looking for a character inside SLASH_STRING. Include filenames.h. (captured_main) [__MINGW32__]: Make argv[0] absolute, so that relocate_gdb_directory works when passed gdb_program_name. Include windows-nat.h. 2013-03-22 Jan Kratochvil * exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR. * remote.c (trace_error): Remove the special handling of '2'. (readchar) (readchar) (getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them. (remote_get_trace_status): Call throw_exception if EX is TARGET_CLOSE_ERROR. * utils.c (perror_with_name): Rename to ... (throw_perror_with_name): ... here. New parameter errcode, describe it in the function comment. (perror_with_name): New function wrapper. * utils.h (enum errors): New stub declaration. (throw_perror_with_name): New declaration. 2013-03-22 Pedro Alves Yao Qi Mark Kettenis * cli/cli-setshow.c (do_set_command) : Don't let the user set the value to UINT_MAX directly. : Don't let the user set the value to INT_MAX directly. 2013-03-22 Jan Kratochvil * remote.c (remote_unpush_target): New function. (remote_open_1): Remove two pop_target calls, update one comment, add comment to target_preopen call. Replace pop_target call by remote_unpush_target call. (interrupt_query, readchar, getpkt_or_notif_sane_1): Replace pop_target calls by remote_unpush_target calls. 2013-03-22 Pedro Alves * linux-nat.c (linux_child_follow_fork): Don't call linux_enable_event_reporting. (linux_handle_extended_wait): Don't call linux_enable_event_reporting. 2013-03-22 Pedro Alves * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro, use it to rewrite the trampoline buffers with type gdb_byte[], and undefine the macro. Remove char* cast. 2013-03-21 Doug Evans New commands "mt set per-command {space,time,symtab} {on,off}". * NEWS: Add entry. * event-top.c: #include "maint.h". * main.c: #include "maint.h". * maint.c: #include , , block.h, top.h, timeval-utils.h, maint.h, cli/cli-setshow.h. (per_command_time, per_command_space): New static globals. (per_command_symtab): New static global. (per_command_setlist, per_command_showlist): New static globals. (struct cmd_stats): Move here from utils.c. (set_per_command_time): Renamed from set_display_time in utils.c and moved here. All callers updated. (set_per_command_space): Renamed from set_display_space in utils.c and moved here. All callers updated. (count_symtabs_and_blocks): New function. (report_command_stats): Moved here from utils.c. Add support for printing symtab stats. Only print data if enabled before command executed. (make_command_stats_cleanup): Ditto. (sert_per_command_cmd, show_per_command_cmd): New functions. (_initialize_maint_cmds): Add new commands mt set per-command {space,time,symtab} {on,off}. * maint.h: New file. * top.c: #include "maint.h". * utils.c (reset_prompt_for_continue_wait_time): New function. (get_prompt_for_continue_wait_time): New function. * utils.h (reset_prompt_for_continue_wait_time): Declare (get_prompt_for_continue_wait_time): Declare. (make_command_stats_cleanup): Moved to maint.h. (set_display_time, set_display_space): Moved to maint.h and renamed to set_per_command_time, set_per_command_space. * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from parse_binary_operation and made non-static. Don't call error, just return an error marker. All callers updated. * cli/cli-setshow.h (parse_cli_boolean_value): Declare. 2013-03-21 Tom Tromey * symfile.c (alloc_section_addr_info): Update header. Don't set 'num_sections' field. (build_section_addr_info_from_section_table): Set 'num_sections'. (build_section_addr_info_from_bfd): Likewise. (build_section_addr_info_from_objfile): Remove dead loop condition. (free_section_addr_info): Unconditionally call xfree. (relative_addr_info_to_section_offsets, addrs_section_sort) (addr_info_make_relative, syms_from_objfile_1): Remove dead loop condition. (syms_from_objfile_1): Remove dead 'if' condition. Check 'num_sections'. (add_symbol_file_command): Set 'num_sections'. * symfile-mem.c (symbol_file_add_from_memory): Set 'num_sections'. * somread.c (som_symfile_offsets): Remove dead loop condition. * machoread.c (macho_symfile_offsets): Remove dead 'if'. * jit.c (jit_bfd_try_read_symtab): Set 'num_sections'. 2013-03-21 Tom Tromey * tracepoint.h (decode_agent_options): Add 'trace_string' argument. * tracepoint.c (decode_agent_options): Add 'trace_string' argument. (validate_actionline): Update. (collect_symbol): Add 'trace_string' argument. (struct add_local_symbols_data) : New field. (do_collect_symbol): Update. (add_local_symbols): Add 'trace_string' argument. (encode_actions_1): Update. (trace_dump_actions): Update. * dwarf2loc.c (access_memory): Update. * ax.h (struct agent_expr) : New fields. * ax-general.c (new_agent_expr): Update. * ax-gdb.h (gen_trace_for_expr, gen_trace_for_var) (gen_trace_for_return_address): Add argument. (trace_kludge, trace_string_kludge): Remove. * ax-gdb.c (trace_kludge, trace_string_kludge): Remove. (gen_traced_pop, gen_fetch, gen_bitfield_ref, gen_expr): Update. (gen_trace_for_var): Add 'trace_string' argument. (gen_trace_for_expr, gen_trace_for_return_address): Likewise. (gen_printf, agent_eval_command_one): Update. 2013-03-21 Tom Tromey PR exp/15109: * c-exp.y (yylex): Rewrite to push all tokens onto the FIFO. Handle FILENAME token. 2013-03-21 Tom Tromey * c-exp.y (YYPRINT): Define. (c_print_token): New function. 2013-03-21 Tom Tromey * c-exp.y (%union) : Remove. 2013-03-21 Yao Qi * ctf.c: Include "gdb_stat.h". [USE_WIN32API]: New macro 'mkdir'. (ctf_start): Use permission bits macros if they are defined. 2013-03-20 Keith Seitz * breakpoint.h (struct breakpoint): Add comment to extra_string indicating that this member is mallod'd. * breakpoint.c (base_breakpoint_dtor): Free extra_string. 2013-03-20 Pedro Alves PR gdb/15289 * cli/cli-setshow.c (do_set_command) : Use LONGEST for variable holding the result of parsing the command argument. Throw error if the value is greater than UINT_MAX. Print the invalid value with plongest. : Use LONGEST for variable holding the result of parsing the command argument. Throw error if the value is greater than INT_MAX, not greater or equal. Also throw error if the value is less than INT_MIN. Print the invalid value with plongest. : Throw error if the value is greater than INT_MAX, not greater or equal. (do_show_command) : Use %d for printing int, not %u. 2013-03-20 Tom Tromey * ax-gdb.c (gen_var_ref): Unconditionally call via computed ops, if possible. * dwarf2read.c (read_func_scope): Remove old FIXME. * eval.c (evaluate_subexp_standard): Check SYMBOL_COMPUTED_OPS, not LOC_COMPUTED. * findvar.c (symbol_read_needs_frame, default_read_var_value): Unconditionally call via computed ops, if possible. * printcmd.c (address_info): Unconditionally call via computed ops, if possible. * stack.c (read_frame_arg): Unconditionally call via computed ops, if possible. * symtab.c (register_symbol_computed_impl): Sanity check 'ops'. * tracepoint.c (scope_info): Unconditionally call via computed ops, if possible. 2013-03-20 Jan Kratochvil Tom Tromey PR symtab/8421: * coffread.c (coff_register_index): New global. (process_coff_symbol, coff_read_enum_type): Set SYMBOL_ACLASS_INDEX. (_initialize_coffread): Initialize new global. * dwarf2loc.c (locexpr_find_frame_base_location) (dwarf2_block_frame_base_locexpr_funcs) (loclist_find_frame_base_location) (dwarf2_block_frame_base_loclist_funcs): New. (dwarf_expr_frame_base_1): Call SYMBOL_BLOCK_OPS, remove internal_error. (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Add location_has_loclist. * dwarf2loc.h (dwarf2_block_frame_base_locexpr_funcs) (dwarf2_block_frame_base_loclist_funcs): New. * dwarf2read.c (dwarf2_locexpr_index, dwarf2_loclist_index) (dwarf2_locexpr_block_index, dwarf2_loclist_block_index): New globals. (read_func_scope): Update. (fixup_go_packaging, mark_common_block_symbol_computed) (var_decode_location, new_symbol_full, dwarf2_const_value): Set SYMBOL_ACLASS_INDEX. (dwarf2_symbol_mark_computed): Likewise. Add 'is_block' argument. (_initialize_dwarf2_read): Initialize new globals. * jit.c (finalize_symtab): Set SYMBOL_ACLASS_INDEX. * jv-lang.c (add_class_symbol): Set SYMBOL_ACLASS_INDEX. * mdebugread.c (mdebug_register_index, mdebug_regparm_index): New globals. (parse_symbol, psymtab_to_symtab_1): Set SYMBOL_ACLASS_INDEX. (_initialize_mdebugread): Initialize new globals. * psympriv.h (struct partial_symbol) : Update comment. * stabsread.c (patch_block_stabs): Set SYMBOL_ACLASS_INDEX. (stab_register_index, stab_regparm_index): New globals. (define_symbol, read_enum_type, common_block_end): Set SYMBOL_ACLASS_INDEX. (_initialize_stabsread): Initialize new globals. * symtab.c (next_aclass_value, symbol_impl, symbol_impls): New globals. (MAX_SYMBOL_IMPLS): New define. (register_symbol_computed_impl, register_symbol_block_impl) (register_symbol_register_impl) (initialize_ordinary_address_classes): New functions. (_initialize_symtab): Call initialize_ordinary_address_classes. * symtab.h (enum address_class) : New constant. (struct symbol_impl): New. (SYMBOL_ACLASS_BITS): New define. (struct symbol) : Remove fields. : New field. (symbol_impls): Declare. (SYMBOL_CLASS, SYMBOL_COMPUTED_OPS, SYMBOL_REGISTER_OPS): Redefine. (SYMBOL_IMPL, SYMBOL_ACLASS_INDEX): New defines. (register_symbol_computed_impl, register_symbol_block_impl) (register_symbol_register_impl): Declare. (struct symbol_computed_ops): Add location_has_loclist. (struct symbol_block_ops): New. (SYMBOL_BLOCK_OPS): New. * xcoffread.c (process_xcoff_symbol): Set SYMBOL_ACLASS_INDEX. 2013-03-20 Tom Tromey * psymtab.c (find_pc_sect_psymbol, fixup_psymbol_section) (print_partial_symbols, recursively_search_psymtabs): Use PSYMBOL_CLASS. 2013-03-20 Pierre Muller * contrib/ari/gdb_ari.sh (OP eol rule): Also check addtion, subtraction, multiplication and division binary operator. 2013-03-20 Jan Kratochvil Code cleanup. * bfd-target.c (target_bfd_xclose): Remove parameter quitting. * bsd-kvm.c (bsd_kvm_close): Likewise. * bsd-uthread.c (bsd_uthread_close): Likewise. * corelow.c (core_close): Likewise. (core_close_cleanup): Remove parameter quitting from a caller. * event-top.c (async_disconnect): Likewise. * exec.c (exec_close_1): Remove parameter quitting. * go32-nat.c (go32_close): Likewise. * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove parameter quitting from a caller. * mips-linux-nat.c (super_close): Remove parameter quitting from the variable. (mips_linux_close): Remove parameter quitting. Remove parameter quitting from a caller. * monitor.c (monitor_close): Remove parameter quitting. * monitor.h (monitor_close): Likewise. * record-btrace.c (record_btrace_close): Likewise. * record-full.c (record_full_close): Likewise. * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove it also from fprintf_unfiltered. * remote-mips.c (mips_close): Remove parameter quitting. (mips_detach): Remove parameter quitting from a caller. * remote-sim.c (gdbsim_close): Remove parameter quitting. (gdbsim_close): Remove duplicate function comment. Remove parameter quitting and remove it also from printf_filtered. * remote.c (remote_close): Remove parameter quitting. * solib-svr4.c (enable_break): Remove parameter quitting from a caller. * target.c (update_current_target): Remove parameter int from to_close de_fault. (push_target, unpush_target, pop_target): Remove parameter quitting from a caller. (pop_all_targets_above, pop_all_targets): Remove parameter quitting. Remove parameter quitting from a caller. (target_preopen): Remove parameter quitting from a caller. (target_close): Remove parameter quitting. Remove parameter quitting from a caller two times. Remove parameter quitting also from fprintf_unfiltered. * target.h (struct target_ops): Remove parameter quitting and as int from fields to_xclose and to_close. (extern struct target_ops current_target): (target_close, pop_all_targets): Remove parameter quitting. Update the comment. (pop_all_targets_above): Remove parameter quitting. * top.c (quit_target): Remove parameter quitting from a caller. * tracepoint.c (tfile_close): Remove parameter quitting. * windows-nat.c (windows_close): Remove parameter quitting. 2013-03-20 Corinna Vinschen * windows-nat.c (handle_output_debug_string): Replace call to string_to_core_addr with call to strtoull. 2013-03-20 Yao Qi * ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS and write it to CTF metadata. 2013-03-19 Corinna Vinschen * windows-nat.c (handle_output_debug_string): Change type of n to SIZE_T to avoid crash on 64 bit systems. 2013-03-17 Eli Zaretskii * python/python-internal.h (HAVE_SNPRINTF) [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings about redefinition of snprintf by pyerrors.h. 2013-03-15 Steve Ellcey * remote-sim.c (sim_command_completer): Make char arguments const. 2013-03-15 Tom Tromey PR c++/15116: * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC. 2013-03-14 Tom Tromey * gdb_bfd.c (struct gdb_bfd_data) : New fields. (get_file_crc): Move from symfile.c. (gdb_bfd_crc): New function. * gdb_bfd.h (gdb_bfd_crc): Declare. * objfiles.h (struct objfile) : Remove. * symfile.c (get_file_crc): Move to gdb_bfd.c. (separate_debug_file_exists): Use gdb_bfd_crc. 2013-03-14 Tom Tromey * symfile.c (get_debug_link_info): Remove. (find_separate_debug_file_by_debuglink): Use bfd_get_debug_link_info. 2013-03-14 Tom Tromey * symtab.c (error_in_psymtab_expansion): New function. (lookup_symbol_aux_quick) (basic_lookup_transparent_type_quick): Remove "last resort" code. Use error_in_psymtab_expansion. 2013-03-14 Doug Evans Jan Kratochvil * dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after any successful compare_filenames_for_search or FILENAME_CMP. * psymtab.c (partial_map_symtabs_matching_filename): Likewise. * symtab.c (iterate_over_some_symtabs): Likewise. 2013-03-14 Jan Kratochvil * source.c (print_source_lines_base): Make a local copy of symtab_to_fullname. 2013-03-14 Hui Zhu Jan Kratochvil * source.c (print_source_lines_base): Suppress "file" for TUI. 2013-03-14 Keith Seitz Alan Matsuoka PR c++/15203 PR c++/15210 * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and TYPE_CODE_METHOD. * elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain symbols. 2013-03-14 Yao Qi * tracepoint.c (tfile_write_status): Write 'stop_desc' of trace status to tfile if trace is stopped by command 'tstop'. 2013-03-14 Yao Qi * tracepoint.c (tfile_write_status): Write trace notes and user name into tfile if they are not NULL. 2013-03-14 Hui Zhu Yao Qi * Makefile.in (REMOTE_OBS): Add ctf.o. (SFILES): Add ctf.c. (HFILES_NO_SRCDIR): Add ctf.h. * ctf.c, ctf.h: New files. * tracepoint.c: Include 'ctf.h'. (collect_pseudocommand): Remove static. (trace_save_command): Parse option "-ctf". Produce different trace file writers per option. Adjust output message. (trace_save_tfile, trace_save_ctf): New. * tracepoint.h (trace_save_tfile, trace_save_ctf): Declare. * mi/mi-main.c: Include 'ctf.h'. (mi_cmd_trace_save): Handle option '-ctf'. Call either trace_save_tfile or trace_save_ctf. * NEWS: Mention these changes. 2013-03-14 Yao Qi * tracepoint.c (trace_file_writer_xfree): New. (struct tfile_writer_data): New. (tfile_dtor, tfile_can_target_save, tfile_start): New. (tfile_write_header, tfile_write_regblock_type): New. (tfile_write_status, tfile_write_uploaded_tsv): New. (tfile_write_uploaded_tp, tfile_write_definition_end): New. (tfile_write_raw_data, (tfile_end): New. (tfile_write_ops): New global variable. (TRACE_WRITE_R_BLOCK): New macro. (TRACE_WRITE_M_BLOCK_HEADER): New macro. (TRACE_WRITE_M_BLOCK_MEMORY): New macro. (TRACE_WRITE_V_BLOCK): New macro. (trace_save): Add extra one parameter WRITER. Make it static. Use WRITER to writer trace. (tfile_trace_file_writer_new): New. (trace_save_command): Caller update. (trace_save_tfile): Write trace data in TFILE format. * tracepoint.h (struct trace_frame_write_ops): New. (struct trace_file_write_ops): New. (struct trace_file_writer): New. (trace_save): Remove its declaration. (trace_save_tfile): Declare it. * mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile instead of trace_save. 2013-03-13 Pedro Alves * hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static. 2013-03-13 Pedro Alves * dbxread.c (read_ofile_symtab, process_one_symbol): Remove commented out code. * demangle.c (current_demangling_style_string): Make it const. (set_demangling_command): Assert the demangling style is known. Remove all handling of unknown styles. Set 'current_demangling_style_string' to an element of the demangling_style_names array. (set_demangling_style): Delete. (_initialize_demangler): Set current_demangling_style_string to the element of the demangling_style_names array that corresponds to the default demangling style. Remove FIXME note. Don't call set_demangling_style. * gdb-demangle.h (set_demangling_style): Remove declaration. 2013-03-13 Pedro Alves * ada-lang.c (struct add_partial_datum) : Make fields const. (ada_make_symbol_completion_list): Make "text0" parameter const. * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const. * breakpoint.c (condition_completer): Make "text" and "word" parameters const. Adjust. (check_tracepoint_command): Adjust to validate_actionline prototype change. (catch_syscall_completer): Make "text" and "word" parameters const. * cli/cli-cmds.c (show_user): Make "comname" local const. (valid_command_p): Make "command" parameter const. (alias_command): Make "alias_prefix" and "command_prefix" locals const. * cli/cli-decode.c (add_cmd): Make "name" parameter const. (add_alias_cmd): Make "name" and "oldname" parameters const. Adjust. No longer make copy of OLDNAME. (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd) (add_setshow_cmd_full, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd) (delete_cmd, add_info, add_info_alias, add_com, add_com_alias): Make "name" parameter const. (help_cmd): Rename "command" parameter to "arg". New const local "command". (find_cmd): Make "command" parameter const. (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to deprecated_cmd_warning prototype change. (undef_cmd_error): Make "cmdtype" parameter const. (lookup_cmd): Make "line" parameter const. (deprecated_cmd_warning): Change type of "text" parameter to pointer to const char, from pointer to pointer to char. Adjust. (lookup_cmd_composition): Make "text" parameter const. (complete_on_cmdlist, complete_on_enum): Make "text" and "word" parameters const. * cli/cli-decode.h (struct cmd_list_element) : Make field const. * cli/cli-script.c (validate_comname): Make "tem" local const. (define_command): New const local "tem_c". Use it in calls to lookup_cmd. (document_command): Make "tem" and "comfull" locals const. (show_user_1): Make "prefix" and "name" parameters const. * cli-script.h (show_user_1): Make "prefix" and "name" parameters const. * command.h (add_cmd, add_alias_cmd, add_prefix_cmd) (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1) (deprecated_cmd_warning, lookup_cmd_composition, add_com) (add_com_alias, add_info, add_info_alias, complete_on_cmdlist) (complete_on_enum, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Change prototypes, constifying strings. * completer.c (noop_completer, filename_completer): Make "text" and "prefix" parameters const. (location_completer, expression_completer) (complete_line_internal): Make "text" and "prefix" parameters const and adjust. (command_completer, signal_completer): Make "text" and "prefix" parameters const. * completer.h (noop_completer, filename_completer) (expression_completer, location_completer, command_completer) (signal_completer): Change prototypes. * corefile.c (complete_set_gnutarget): Make "text" and "word" parameters const. * cp-abi.c (cp_abi_completer): Likewise. * expression.h (parse_expression_for_completion): Change prototype. * f-lang.c (f_make_symbol_completion_list): Make "text" and "word" parameters const. * infcmd.c (_initialize_infcmd): Make "cmd_name" local const. * infrun.c (handle_completer): Make "text" and "word" parameters const. * interps.c (interpreter_completer): Make "text" and "word" parameters const. * language.h (struct language_defn) : Make "text" and "word" parameters const. * parse.c (parse_exp_1): Move const hack to parse_exp_in_context. (parse_exp_in_context): Rename to ... (parse_exp_in_context_1): ... this. (parse_exp_in_context): Reimplement, with const hack from parse_exp_1. (parse_expression_for_completion): Make "string" parameter const. * printcmd.c (decode_format): Make "string_ptr" parameter pointer to pointer to const char. Adjust. (print_command_1): Make "exp" parameter const. (output_command): Rename to ... (output_command_const): ... this. Make "exp" parameter const. (output_command): Reimplement. (x_command): Adjust. (display_command): Rename "exp" parameter to "arg". New "exp" local, const version of "arg". * python/py-auto-load.c (gdbpy_initialize_auto_load): Make "cmd_name" local const. * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree call. (cmdpy_completer): Make "text" and "word" parameters const. (gdbpy_parse_command_name): Make "prefix_text2" local const. * python/py-param.c (add_setshow_generic): Make "tmp_name" local const. * remote.c (_initialize_remote): Make "cmd_name" local const. * symtab.c (language_search_unquoted_string): Make "text" and "p" parameters const. Adjust. (completion_list_add_fields): Make "sym_text", "text" and "word" parameters const. (struct add_name_data) : Make fields const. (default_make_symbol_completion_list_break_on): Make "text" and "word" parameters const. Adjust locals. (default_make_symbol_completion_list) (make_symbol_completion_list, make_symbol_completion_type) (make_symbol_completion_list_fn): Make "text" and "word" parameters const. (make_file_symbol_completion_list): Make "text", "word" and "srcfile" parameters const. Adjust locals. (add_filename_to_list): Make "text" and "word" parameters const. (struct add_partial_filename_data) : Make fields const. (make_source_files_completion_list): Make "text" and "word" parameters const. * symtab.h (default_make_symbol_completion_list_break_on) (default_make_symbol_completion_list, make_symbol_completion_list) (make_symbol_completion_type enum type_code) (make_symbol_completion_list_fn make_file_symbol_completion_list) (make_source_files_completion_list): Change prototype. * top.c (execute_command): Adjust to pass pointer to pointer to const char to lookup_cmd, and to deprecated_cmd_warning prototype change. (set_verbose): Make "cmdname" local const. * tracepoint.c (decode_agent_options): Make "exp" parameter const, and adjust. (validate_actionline): Make "line" parameter a pointer to const char, and adjust. (encode_actions_1): Make "action_exp" local const, and adjust. (encode_actions): Adjust. (replace_comma): Delete. (trace_dump_actions): Make "action_exp" and "next_comma" locals const, and adjust. Don't frob the action string while splitting it at commas. Instead, make a copy of each split substring in turn. (trace_dump_command): Adjust to validate_actionline prototype change. * tracepoint.h (decode_agent_options, decode_agent_options) (encode_actions, validate_actionline): Change prototypes. * valprint.h (output_command): Delete declaration. (output_command_const): Declare. * value.c (function_destroyer): Cast const away in xfree call. 2013-03-13 Pedro Alves * ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL rather than casting 'const char * const *' to 'const char **'. * ada-lex.l (processInt): Make "trailer" local const. Remove 'const char **' cast. * arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *' locals, and use those as strtol output pointer, instead than doing invalid casts to from 'const char **' to 'char **'. (_initialize_demangle): Remove cast. * i386-tdep.c (i386_stap_parse_special_token): : Add 'char *' locals, and use those as strtol output pointer, instead than doing invalid casts to from 'const char **' to 'char **'. * solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**' casts. * stap-probe.c (stap_parse_register_operand) (stap_parse_single_operand): Likewise. 2013-03-13 Yao Qi * tracepoint.c (tfile_get_trace_state_variable_value): Look for the last matched 'V' blcok in trace frame. 2013-03-12 Joel Brobecker * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut. 2013-03-12 Joel Brobecker GDB 7.6 branch created (branch timestamp: 2013-03-12 22:15 UTC) * version.in: Bump version to 7.6.50.20130312-cvs. 2013-03-12 Keith Seitz * mi/mi-cmds.h (mi_execute_command): Make "cmd" const. * mi/mi-interp.c (mi_interpreter_exec): Make "command" const. Remove temporary copy of input string. (mi_execute_command_wrapper): Make "cmd" const. * mi/mi-main.c (mi_execute_command): Make "string_ptr" const. * mi/mi-parse.c (mi_parse_argv): Make "args" const. Use const strings. (mi_parse): Make "cmd" const. Use const strings. * mi/mi-parse.h (mi_parse): Make "cmd" const. 2013-03-12 Keith Seitz * ada-lang.c (ada_read_renaming_var_value): Pass const pointer to expression string to parse_exp_1. (create_excep_cond_exprs): Likewise. * ax-gdb.c (agent_eval_command_one): Likewise. (maint_agent_printf_command): Likewise. Constify much of the string handling/parsing. * breakpoint.c (set_breakpoint_condition): Pass const pointer to expression string to parse_exp_1. (update_watchpoint): Likewise. (parse_cmd_to_aexpr): Constify string handling. Pass const pointer to parse_exp_1. (init_breakpoint_sal): Pass const pointer to parse_exp_1. (find_condition_and_thread): Likewise. Make TOK const. (watch_command_1): Make "arg" const. Constify string handling. Copy the expression string instead of changing the input string. (update_breakpoint_location): Pass const pointer to parse_exp_1. * eval.c (parse_and_eval_address): Make "exp" const. (parse_to_comma_and_eval): Make "expp" const. (parse_and_eval): Make "exp" const. * expression.h (parse_expression): Make argument const. (parse_exp_1): Make first argument const. * findcmd.c (parse_find_args): Treat "args" as const. * linespec.c (parse_linespec): Pass const pointer to linespec_expression_to_pc. (linespec_expression_to_pc): Make "exp_ptr" const. * parse.c (parse_exp_1): Make "stringptr" const. Make a copy of the expression to pass to parse_exp_in_context until this whole interface can be constified. (parse_expression): Make "string" const. * printcmd.c (ui_printf): Treat "arg" as const. Handle const strings. * tracepoint.c (validate_actionline): Pass const pointer to all calls to parse_exp_1. (encode_actions_1): Likewise. * value.h (parse_to_comma_and_eval): Make argument const. (parse_and_eval_address): Likewise. (parse_and_eval): Likewise. * varobj.c (varobj_create): Pass const pointer to parse_exp_1. (varobj_set_value): Likewise. * cli/cli-cmds.c (disassemble_command): Treat "arg" as const and constify string handling. Pass const pointers to parse_and_eval_address and parse_to_comman_and_eval. * cli/cli-utils.c (skip_to_space): Rename to ... (skip_to_space_const): ... this. Handle const strings. * cli/cli-utils.h (skip_to_space): Turn into macro which invokes skip_to_space_const. (skip_to_space_const): Declare. * common/format.c (parse_format_string): Make "arg" const. Handle const strings. * common/format.h (parse_format_string): Make "arg" const. * gdbserver/ax.c (ax_printf): Make "format" const. * python/python.c (gdbpy_parse_and_eval): Do not make a copy of the expression string. 2013-03-12 Hui Zhu * dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message. 2013-03-12 Yao Qi Hui Zhu * dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert. (dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and DW_OP_deref_size. 2013-03-12 Paul Hilfinger * ada-lex.l (rules): Only recognize 'thread' as a delimiter when followed by numerals, as for c-exp.y. Use new rewind_to_char function to rewind the input for expression-delimiting tokens. (rewind_to_char): New function. 2013-03-11 Pedro Alves Jan Kratochvil * configure: Regenerate. * configure.ac (check dynamic export flag): Link python test with $PYTHON_LIBS. 2013-03-11 Doug Evans Keith Seitz * linespec.c (find_linespec_symbols): Call find_function_symbols first, and then call lookup_prefix_sym/find_method. 2013-03-11 Pedro Alves * charset.c (convert_between_encodings): Don't cast between different pointer to pointer types. Instead, make the 'inp' local be of the type iconv expects. (wchar_iterate): Don't cast between different pointer to pointer types. Instead, use new pointer local of the type iconv expects. * target.c (target_read_stralloc, target_fileio_read_stralloc): Add new local of type char pointer, and use it to get a char/string view of the byte buffer, instead of casting between pointer to pointer types. 2013-03-11 Hafiz Abid Qadeer * remote.c (remote_set_trace_buffer_size): Move != operator to the start of next line to fix an ARI warning. 2013-03-11 Markus Metzger * NEWS: Add record changes. 2013-03-11 Markus Metzger * record-btrace.c (btrace_insn_history): Omit the pc prefix in the instruction history disassembly. * disasm.c (dump_insns): Omit the pc prefix, if requested. * disasm.h (DISASSEMBLY_OMIT_PC): New. 2013-03-11 Markus Metzger * Makefile.in (SFILES): Add record-btrace.c (COMMON_OBS): Add record-btrace.o * record-btrace.c: New. * objfiles.c: Include btrace.h. (free_objfile): call btrace_free_objfile. 2013-03-11 Markus Metzger * target.c (target_call_history, target_call_history_from, target_call_history_range): New. * target.h (target_ops) : New fields. (target_call_history, target_call_history_from, target_call_history_range): New declaration. * record.c (get_call_history_modifiers, cmd_record_call_history, record_call_history_size): New. (_initialize_record): Add the "record function-call-history" command. Add "set/show record function-call-history-size" commands. * record.h (record_print_flag): New. 2013-03-11 Markus Metzger * target.h (target_ops) : New fields. (target_insn_history): New. (target_insn_history_from): New. (target_insn_history_range): New. * target.c (target_insn_history): New. (target_insn_history_from): New. (target_insn_history_range): New. * record.c: Include cli/cli-utils.h, disasm.h, ctype.h. (record_insn_history_size): New. (get_insn_number): New. (get_context_size): New. (no_chunk): New. (get_insn_history_modifiers): New. (cmd_record_insn_history): New. (_initialize_record): Add "set/show record instruction-history-size" command. Add "record instruction-history" command. 2013-03-11 Markus Metzger * record.h (record_disconnect): New. (record_detach): New. (record_mourn_inferior): New. (record_kill): New. * record-full.c (record_disconnect, record_detach, record_mourn_inferior, record_kill): Move to... * record.c: ...here. (DEBUG): New. (record_stop): New. (record_unpush): New. (cmd_record_stop): Call record_stop. Replace unpush_target call with record_unpush call. (record_disconnect, record_detach): Assert that the target is of record stratum. Call record_unpush, record_stop, and DEBUG. (record_mourn_inferior, record_kill): Assert that the target is of record stratum. Call record_unpush and DEBUG. 2013-03-11 Markus Metzger * record-full.h, record-full.c (record_memory_query): Rename to ... (record_full_memory_query): ...this. Update all users. (record_arch_list_add_reg): Rename to ... (record_full_arch_list_add_reg): ...this. Update all users. (record_arch_list_add_mem): Rename to ... (record_full_arch_list_add_mem): ...this. Update all users. (record_arch_list_add_end): Rename to ... (record_full_arch_list_add_end): ...this. Update all users. (record_gdb_operation_disable_set): Rename to ... (record_full_gdb_operation_disable_set): ...this. Update all users. 2013-03-11 Markus Metzger * record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ... (DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users. (RECORD_IS_REPLAY): Renamed to ... (RECORD_FULL_IS_REPLAY): ... this. Updated all users. (RECORD_FILE_MAGIC): Renamed to ... (RECORD_FULL_FILE_MAGIC): ... this. Updated all users. (record_mem_entry): Renamed to ... (record_full_mem_entry): ... this. Updated all users. (record_reg_entry): Renamed to ... (record_full_reg_entry): ... this. Updated all users. (record_end_entry): Renamed to ... (record_full_end_entry): ... this. Updated all users. (record_type) : Renamed to ... (record_full_type) : ... this. Updated all users. (record_entry): Renamed to ... (record_full_entry): ... this. Updated all users. (record_core_buf_entry): Renamed to ... (record_full_core_buf_entry): ... this. Updated all users. (record_core_regbuf): Renamed to ... (record_full_core_regbuf): ... this. Updated all users. (record_core_start): Renamed to ... (record_full_core_start): ... this. Updated all users. (record_core_end): Renamed to ... (record_full_core_end): ... this. Updated all users. (record_core_buf_list): Renamed to ... (record_full_core_buf_list): ... this. Updated all users. (record_first): Renamed to ... (record_full_first): ... this. Updated all users. (record_list): Renamed to ... (record_full_list): ... this. Updated all users. (record_arch_list_head): Renamed to ... (record_full_arch_list_head): ... this. Updated all users. (record_arch_list_tail): Renamed to ... (record_full_arch_list_tail): ... this. Updated all users. (record_stop_at_limit): Renamed to ... (record_full_stop_at_limit): ... this. Updated all users. (record_insn_max_num): Renamed to ... (record_full_insn_max_num): ... this. Updated all users. (record_insn_num): Renamed to ... (record_full_insn_num): ... this. Updated all users. (record_insn_count): Renamed to ... (record_full_insn_count): ... this. Updated all users. (record_ops): Renamed to ... (record_full_ops): ... this. Updated all users. (record_core_ops): Renamed to ... (record_full_core_ops): ... this. Updated all users. (set_record_cmdlist): Renamed to ... (set_record_full_cmdlist): ... this. Updated all users. (show_record_cmdlist): Renamed to ... (show_record_full_cmdlist): ... this. Updated all users. (record_cmdlist): Renamed to ... (record_full_cmdlist): ... this. Updated all users. (record_beneath_to_resume_ops): Renamed to ... (record_full_beneath_to_resume_ops): ... this. Updated all users. (record_beneath_to_resume): Renamed to ... (record_full_beneath_to_resume): ... this. Updated all users. (record_beneath_to_wait_ops): Renamed to ... (record_full_beneath_to_wait_ops): ... this. Updated all users. (record_beneath_to_wait): Renamed to ... (record_full_beneath_to_wait): ... this. Updated all users. (record_beneath_to_store_registers_ops): Renamed to ... (record_full_beneath_to_store_registers_ops): ... this. Updated all users. (record_beneath_to_store_registers): Renamed to ... (record_full_beneath_to_store_registers): ... this. Updated all users. (record_beneath_to_xfer_partial_ops): Renamed to ... (record_full_beneath_to_xfer_partial_ops): ... this. Updated all users. (record_beneath_to_xfer_partial): Renamed to ... (record_full_beneath_to_xfer_partial): ... this. Updated all users. (record_beneath_to_insert_breakpoint): Renamed to ... (record_full_beneath_to_insert_breakpoint): ... this. Updated all users. (record_beneath_to_stopped_by_watchpoint): Renamed to ... (record_full_beneath_to_stopped_by_watchpoint): ... this. Updated all users. (record_beneath_to_stopped_data_address): Renamed to ... (record_full_beneath_to_stopped_data_address): ... this. Updated all users. (record_beneath_to_async): Renamed to ... (record_full_beneath_to_async): ... this. Updated all users. (record_goto_insn): Renamed to ... (record_full_goto_insn): ... this. Updated all users. (record_save): Renamed to ... (record_full_save): ... this. Updated all users. (record_reg_alloc): Renamed to ... (record_full_reg_alloc): ... this. Updated all users. (record_reg_release): Renamed to ... (record_full_reg_release): ... this. Updated all users. (record_mem_alloc): Renamed to ... (record_full_mem_alloc): ... this. Updated all users. (record_mem_release): Renamed to ... (record_full_mem_release): ... this. Updated all users. (record_end_alloc): Renamed to ... (record_full_end_alloc): ... this. Updated all users. (record_end_release): Renamed to ... (record_full_end_release): ... this. Updated all users. (record_entry_release): Renamed to ... (record_full_entry_release): ... this. Updated all users. (record_list_release): Renamed to ... (record_full_list_release): ... this. Updated all users. (record_list_release_following): Renamed to ... (record_full_list_release_following): ... this. Updated all users. (record_list_release_first): Renamed to ... (record_full_list_release_first): ... this. Updated all users. (record_arch_list_add): Renamed to ... (record_full_arch_list_add): ... this. Updated all users. (record_get_loc): Renamed to ... (record_full_get_loc): ... this. Updated all users. (record_check_insn_num): Renamed to ... (record_full_check_insn_num): ... this. Updated all users. (record_arch_list_cleanups): Renamed to ... (record_full_arch_list_cleanups): ... this. Updated all users. (record_message): Renamed to ... (record_full_message): ... this. Updated all users. (record_message_wrapper): Renamed to ... (record_full_message_wrapper): ... this. Updated all users. (record_message_wrapper_safe): Renamed to ... (record_full_message_wrapper_safe): ... this. Updated all users. (record_gdb_operation_disable): Renamed to ... (record_full_gdb_operation_disable): ... this. Updated all users. (record_hw_watchpoint): Renamed to ... (record_full_hw_watchpoint): ... this. Updated all users. (record_exec_insn): Renamed to ... (record_full_exec_insn): ... this. Updated all users. (record_restore): Renamed to ... (record_full_restore): ... this. Updated all users. (record_async_inferior_event_token): Renamed to ... (record_full_async_inferior_event_token): ... this. Updated all users. (record_async_inferior_event_handler): Renamed to ... (record_full_async_inferior_event_handler): ... this. Updated all users. (record_core_open_1): Renamed to ... (record_full_core_open_1): ... this. Updated all users. (record_open_1): Renamed to ... (record_full_open_1): ... this. Updated all users. (record_open): Renamed to ... (record_full_open): ... this. Updated all users. (record_close): Renamed to ... (record_full_close): ... this. Updated all users. (record_resume_step): Renamed to ... (record_full_resume_step): ... this. Updated all users. (record_resumed): Renamed to ... (record_full_resumed): ... this. Updated all users. (record_execution_dir): Renamed to ... (record_full_execution_dir): ... this. Updated all users. (record_resume): Renamed to ... (record_full_resume): ... this. Updated all users. (record_get_sig): Renamed to ... (record_full_get_sig): ... this. Updated all users. (record_sig_handler): Renamed to ... (record_full_sig_handler): ... this. Updated all users. (record_wait_cleanups): Renamed to ... (record_full_wait_cleanups): ... this. Updated all users. (record_wait_1): Renamed to ... (record_full_wait_1): ... this. Updated all users. (record_wait): Renamed to ... (record_full_wait): ... this. Updated all users. (record_stopped_by_watchpoint): Renamed to ... (record_full_stopped_by_watchpoint): ... this. Updated all users. (record_disconnect): Renamed to ... (record_full_disconnect): ... this. Updated all users. (record_detach): Renamed to ... (record_full_detach): ... this. Updated all users. (record_mourn_inferior): Renamed to ... (record_full_mourn_inferior): ... this. Updated all users. (record_kill): Renamed to ... (record_full_kill): ... this. Updated all users. (record_stopped_data_address): Renamed to ... (record_full_stopped_data_address): ... this. Updated all users. (record_registers_change): Renamed to ... (record_full_registers_change): ... this. Updated all users. (record_store_registers): Renamed to ... (record_full_store_registers): ... this. Updated all users. (record_xfer_partial): Renamed to ... (record_full_xfer_partial): ... this. Updated all users. (record_breakpoint): Renamed to ... (record_full_breakpoint): ... this. Updated all users. (record_breakpoint_p): Renamed to ... (record_full_breakpoint_p): ... this. Updated all users. (record_breakpoints): Renamed to ... (record_full_breakpoints): ... this. Updated all users. (record_sync_record_breakpoints): Renamed to ... (record_full_sync_record_breakpoints): ... this. Updated all users. (record_init_record_breakpoints): Renamed to ... (record_full_init_record_breakpoints): ... this. Updated all users. (record_insert_breakpoint): Renamed to ... (record_full_insert_breakpoint): ... this. Updated all users. (record_remove_breakpoint): Renamed to ... (record_full_remove_breakpoint): ... this. Updated all users. (record_can_execute_reverse): Renamed to ... (record_full_can_execute_reverse): ... this. Updated all users. (record_get_bookmark): Renamed to ... (record_full_get_bookmark): ... this. Updated all users. (record_goto_bookmark): Renamed to ... (record_full_goto_bookmark): ... this. Updated all users. (record_async): Renamed to ... (record_full_async): ... this. Updated all users. (record_can_async_p): Renamed to ... (record_full_can_async_p): ... this. Updated all users. (record_is_async_p): Renamed to ... (record_full_is_async_p): ... this. Updated all users. (record_execution_direction): Renamed to ... (record_full_execution_direction): ... this. Updated all users. (record_info): Renamed to ... (record_full_info): ... this. Updated all users. (record_delete): Renamed to ... (record_full_delete): ... this. Updated all users. (record_is_replaying): Renamed to ... (record_full_is_replaying): ... this. Updated all users. (record_goto_entry): Renamed to ... (record_full_goto_entry): ... this. Updated all users. (record_goto_begin): Renamed to ... (record_full_goto_begin): ... this. Updated all users. (record_goto_end): Renamed to ... (record_full_goto_end): ... this. Updated all users. (record_goto): Renamed to ... (record_full_goto): ... this. Updated all users. (init_record_ops): Renamed to ... (init_record_full_ops): ... this. Updated all users. (record_core_resume): Renamed to ... (record_full_core_resume): ... this. Updated all users. (record_core_kill): Renamed to ... (record_full_core_kill): ... this. Updated all users. (record_core_fetch_registers): Renamed to ... (record_full_core_fetch_registers): ... this. Updated all users. (record_core_prepare_to_store): Renamed to ... (record_full_core_prepare_to_store): ... this. Updated all users. (record_core_store_registers): Renamed to ... (record_full_core_store_registers): ... this. Updated all users. (record_core_xfer_partial): Renamed to ... (record_full_core_xfer_partial): ... this. Updated all users. (record_core_insert_breakpoint): Renamed to ... (record_full_core_insert_breakpoint): ... this. Updated all users. (record_core_remove_breakpoint): Renamed to ... (record_full_core_remove_breakpoint): ... this. Updated all users. (record_core_has_execution): Renamed to ... (record_full_core_has_execution): ... this. Updated all users. (init_record_core_ops): Renamed to ... (init_record_full_core_ops): ... this. Updated all users. (cmd_record_restore): Renamed to ... (cmd_record_full_restore): ... this. Updated all users. (record_save_cleanups): Renamed to ... (record_full_save_cleanups): ... this. Updated all users. (cmd_record_start): Renamed to ... (cmd_record_full_start): ... this. Updated all users. (set_record_insn_max_num): Renamed to ... (set_record_full_insn_max_num): ... this. Updated all users. (set_record_command): Renamed to ... (set_record_full_command): ... this. Updated all users. (show_record_command): Renamed to ... (show_record_full_command): ... this. Updated all users. (_initialize_record): Renamed to ... (_initialize_record_full): ... this. Updated all users. 2013-03-11 Markus Metzger * record.h: Split into this and ... * record-full.h: ... this. * record.c: Split into this and ... * record-full.c: ... this. * target.h (target_ops): Add new fields to_info_record, to_save_record, to_delete_record, to_record_is_replaying, to_goto_record_begin, to_goto_record_end, to_goto_record. (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * target.c (target_info_record): New. (target_save_record): New. (target_supports_delete_record): New. (target_delete_record): New. (target_record_is_replaying): New. (target_goto_record_begin): New. (target_goto_record_end): New. (target_goto_record): New. * record.h: Declare struct cmd_list_element. (record_cmdlist): New declaration. (set_record_cmdlist): New declaration. (show_record_cmdlist): New declaration. (info_record_cmdlist): New declaration. (cmd_record_goto): New declaration. * record.c: Remove unnecessary includes. Include inferior.h. (cmd_record_goto): Remove declaration. (record_cmdlist): Now extern. Initialize. (set_record_cmdlist): Now extern. Initialize. (show_record_cmdlist): Now extern. Initialize. (info_record_cmdlist): Now extern. Initialize. (find_record_target): New. (require_record_target): New. (cmd_record_start): Update. (cmd_record_delete): Remove target-specific code. Call target_delete_record. (cmd_record_stop): Unpush any record target. (set_record_insn_max_num): Move to record-full.c (set_record_command): Add comment. (show_record_command): Add comment. (info_record_command): Update comment. Remove target-specific code. Call the record target's to_info_record. (cmd_record_start): New. (cmd_record_goto): Now extern. Remove target-specific code. Call target_goto_begin, target_goto_end, or target_goto. (_initialize_record): Move record target ops initialization to record-full.c. Change "record" command help text. Move "record restore", "record set", and "record show" commands to record-full.c. * Makefile.in (SFILES): Add record-full.c. (HFILES_NO_SRCDIR): Add record-full.h. (COMMON_OBS): Add record-full.o. * amd64-linux-tdep.c: Include record-full.h instead of record.h. * arm-tdep.c: Include record-full.h. * i386-linux-tdep.c: Include record-full.h instead of record.h. * i386-tdep.c: Include record-full.h. * infrun.c: Include record-full.h. * linux-record.c: Include record-full.h. * moxie-tdep.c: Include record-full.h. * record-full.c: Include record-full.h. Change module comment. (set_record_full_cmdlist): New. (show_record_full_cmdlist): New. (record_full_cmdlist): New. (record_goto_insn): New declaration. (record_save): New declaration. (record_check_insn_num): Change query string. (record_info): New. (record_delete): New. (record_is_replaying): New. (record_goto_entry): New. (record_goto_begin): New. (record_goto_end): New. (record_goto): New. (init_record_ops): Update. (init_record_core_ops): Update. (cmd_record_save): Rename to record_save. Remove target and arg checks. (cmd_record_start): New. (set_record_insn_max_num): Moved from record.c (set_record_full_command): New. (show_record_full_command): New. (_initialize_record_full): New. 2013-03-11 Markus Metzger * target.h (add_deprecated_target_alias): New. * target.c (add_deprecated_target_alias): New. 2013-03-11 Markus Metzger * common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h, and signal.h. (linux_supports_btrace): Add kernel and cpuid check. (kernel_supports_btrace): New function. (cpu_supports_btrace): New function. (intel_supports_btrace): New function. 2013-03-11 Markus Metzger * target.h (enum target_object): Add TARGET_OBJECT_BTRACE. * remote.c: Include btrace.h. (struct btrace_target_info): New struct. (remote_supports_btrace): New function. (send_Qbtrace): New function. (remote_enable_btrace): New function. (remote_disable_btrace): New function. (remote_teardown_btrace): New function. (remote_read_btrace): New function. (init_remote_ops): Add btrace ops. (enum ): Add btrace packets. (struct protocol_feature remote_protocol_features[]): Add btrace packets. (_initialize_remote): Add packet configuration for branch tracing. 2013-03-11 Markus Metzger * features/btrace.dtd: New file. * Makefile.in (XMLFILES): Add btrace.dtd. * btrace.h (parse_xml_btrace): New declaration. * btrace.c: Include xml-support.h. (parse_xml_btrace): New function. (parse_xml_btrace_block): New function. (block_attributes): New struct. (btrace_attributes): New struct. (btrace_children): New struct. (btrace_elements): New struct. 2013-03-11 Markus Metzger * amd64-linux-nat.c: Include btrace.h and linux-btrace.h. (amd64_linux_enable_btrace): New. (amd64_linux_disable_btrace): New. (amd64_linux_teardown_btrace): New. (_initialize_amd64_linux_nat): Initialize btrace ops. * i386-linux.nat.c: Include btrace.h and linux-btrace.h. (i386_linux_enable_btrace): New. (i386_linux_disable_btrace): New. (i386_linux_teardown_btrace): New. (_initialize_i386_linux_nat): Initialize btrace ops. * config/i386/linux.mh: Add linux-btrace.o. * config/i386/linux64.mh: Add linux-btrace.o. 2013-03-11 Markus Metzger * common/linux_btrace.h: New file. * common/linux_btrace.c: New file. * Makefile.in (SFILES): Add btrace.c. (HFILES_NO_SRCDIR): Add common/linux-btrace.h. (COMMON_OBS): Add btrace.o. (linux-btrace.o): New rule. 2013-03-11 Markus Metzger * target.h: Include btrace.h. (struct target_ops) : New. * target.c (target_supports_btrace): New function. (target_enable_btrace): New function. (target_disable_btrace): New function. (target_teardown_btrace): New function. (target_read_btrace): New function. * btrace.h: New file. * btrace.c: New file. * Makefile.in: Add btrace.c. * gdbthread.h: Include btrace.h. (struct thread_info): Add btrace field. * thread.c: Include btrace.h. (clear_thread_inferior_resources): Call target_teardown_btrace. * common/btrace-common.h: New file. 2013-03-10 Jan Kratochvil * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill for CHILD, ignore PTRACE_KILL errors, move the inner block variable kill_status to outer block. 2013-03-10 Jan Kratochvil Fix entry-values if the callee called a noreturn function. * dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use get_frame_address_in_block. Add new comment. 2013-03-10 Jan Kratochvil Fix entry-values in C++ across CUs. * dwarf2loc.c (call_site_to_target_addr) : Use lookup_minimal_symbol. Add a comment. * dwarf2read.c (read_call_site_scope) : Prefer DW_AT_linkage_name. 2013-03-08 Yao Qi * tracepoint.c (_initialize_tracepoint): Indent the code. 2013-03-08 Pedro Alves * findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'. (parse_find_args, find_command): Change type of pattern buffer locals to 'gdb_byte *'. 2013-03-08 Stan Shebs Hafiz Abid Qadeer * NEWS: Mention set and show trace-buffer-size commands. Mention new packet. * target.h (struct target_ops): New method to_set_trace_buffer_size. (target_set_trace_buffer_size): New macro. * target.c (update_current_target): Set up new method. * tracepoint.c (trace_buffer_size): New global. (start_tracing): Send it to the target. (set_trace_buffer_size): New function. (_initialize_tracepoint): Add new setshow for trace-buffer-size. * remote.c (remote_set_trace_buffer_size): New function. (_initialize_remote): Use it. (QTBuffer:size) New remote command. (PACKET_QTBuffer_size): New enum. (remote_protocol_features): Add an entry for PACKET_QTBuffer_size. 2013-03-08 Tom Tromey * remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct variable. 2013-03-07 Pedro Alves * target.c (target_read_stralloc, target_fileio_read_alloc): *Cast pointer to 'gdb_byte *' in target call. 2013-03-07 Pedro Alves * corefile.c (read_memory_string): Cast pointer to gdb_byte* in call. 2013-03-07 Keith Seitz * breakpoint.c (catch_syscall_split_args): Use skip_spaces. (trace_pass_command): Likewise. * cli/cli-cmds.c: Include cli/cli-utils.h. (source_command): Use skip-spaces. (disassemble_command): Likewise. * findcmd.c: Include cli/cli-utils.h. (parse_find_args): Use skip_spaces. * go32-nat.c: Include cli/cli-utils.h. (go32_sldt): Use skip_spaces. (go32_sgdt): Likewise. (go32_sidt): Likewise. (go32_pde): Likewise. (go32_pte): Likewise. (go32_pte_for_address): Likewise. * infcmd.c: Include cli/cli-utils.h. (registers_info): Use skip_spaces. * linux-tdep.c (read_mapping): Use skip_spaces_const. (linux_info_proc): Likewise. * linux-thread-db.c: Include cli/cli-utils.h. (info_auto_load_libthread_db): Use skip_spaces_const. * m32r-rom.c: Include cli/cli-utils.h. (m32r_upload_command): Use skip_spaces. * maint.c: Include cli/cli-utils.h. (maintenance_translate_address): Use skip_spaces. * mi/mi-parse.c: Include cli/cli-utils.h. (mi_parse_argv): Use skip_spaces. (mi_parse): Likewise. * minsyms.c: Include cli/cli-utils.h. (msymbol_hash_iw): Use skip_spaces_const. * objc-lang.c: Include cli/cli-utils.h. (parse_selector): Use skip_spaces. (parse_method): Likewise. * python/python.c: Include cli/cli-utils.h. (python_interactive_command)[HAVE_PYTHON]: Use skip_spaces. (python_command)[HAVE_PYTHON]: Likewise. (python_interactive_command)[!HAVE_PYTHON]: Likewise. * remote-m32r-sdi.c: Include cli/cli-utils.h. (m32r_load): Use skip_spaces. * serial.c: Include cli/cli-utils.h. (serial_open): Use skip_spaces_const. * stack.c: Include cli/cli-utils.h. (parse_frame_specification_1): Use skip_spaces_const. * symfile.c: Include cli/cli-utils.h. (set_ext_lang_command): Use skip_spaces. * symtab.c: Include cli/cli-utils.h. (rbreak_command): Use skip_spaces. * thread.c (thread_name_command): Use skip_spaces. * tracepoint.c (validate_actionline): Use skip_spaces. (encode_actions_1): Likewise. (trace_find_range_command): Likewise. (trace_find_outside_command): Likewise. (trace_dump_actions): Likewise. 2013-03-07 Pedro Alves * c-lang.c (parse_one_string): Cast argument to gdb_byte *. * expprint.c (print_subexp_standard): Likewise. * utils.c (host_char_to_target): Likewise. * valprint.c (generic_emit_char, generic_printstr): Likewise. * varobj.c (value_get_print_value): Change type of local to char*. Cast it gdb_byte * in call to language printer. 2013-03-07 Pedro Alves * charset.c (struct wchar_iterator) : Change type to 'const gdb_byte *'. (make_wchar_iterator): Remove cast to char*. (wchar_iterate): Change type of local. 2013-03-07 Pedro Alves * regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char for 'regcache->register_status'. 2013-03-07 Pedro Alves * breakpoint.c (breakpoint_xfer_memory): Change type of local to int. 2013-03-07 Pedro Alves * stap-probe.c (handle_stap_probe): Add cast to char*. 2013-03-07 Pedro Alves * linux-record.c (record_linux_system_call) : Pass a signed variable to regcache_raw_read_signed, instead of an unsigned one. 2013-03-07 Pedro Alves * remote-notif.c (notif_debug): Change type to int. * remote-notif.h (notif_debug): Likewise. 2013-03-07 Pedro Alves * ser-tcp.c (tcp_retry_limit): Change type to unsigned int. 2013-03-07 Pedro Alves * remote.c (hex2bin, bin2hex): Move extern declarations to ... * remote.h (hex2bin, bin2hex): ... here. * tracepoint.c (hex2bin, bin2hex): Remove extern declarations. 2013-03-07 Eli Zaretskii * utils.c (initialize_utils): Improve doc strings of "set/show width", "set/show height", and "set/show pagination". 2013-03-06 Keith Seitz * ax-gdb.c (gen_printf): Make FORMAT const. * ax-gdb.h (gen_printf): Likewise. * ax-general.c (ax_string): Make STR const. * ax.h (ax_string): Likewise. 2013-03-06 Doug Evans * elfread.c (elf_symfile_read): Move debugging printf to more logical location. 2013-03-06 Pedro Alves * python/py-utils.c (target_string_to_unicode): Delete function. * python/python-internal.h (target_string_to_unicode): Delete declaration. 2013-03-06 Pierre Muller * linespec.c (get_current_search_block): ARI fix, use (void) for empty parameter list. 2013-03-05 Doug Evans * ada-lang.c (ada_lookup_symbol_list_worker): New function, contents of old ada_lookup_symbol_list. In !full_search case, don't search superblocks. (ada_lookup_symbol_list): Delete arg full_search, all callers updated. Call ada_lookup_symbol_list_worker. (ada_iterate_over_symbols): Call ada_lookup_symbol_list_worker. * ada-lang.h (ada_lookup_symbol_list): Update. * language.h (language_defn): Update comment for la_iterate_over_symbols. * linespec.c (iterate_over_file_blocks): New function. (iterate_over_all_matching_symtabs): Call it. (lookup_prefix_sym): Ditto. (get_current_search_block): New function. (get_search_block): Delete. (find_label_symbols): Call get_current_search_block. (add_matching_symbols_to_info): Call iterate_over_file_blocks. * symtab.c (iterate_over_symbols): Don't search superblocks. 2013-03-05 Yao Qi * cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change parameter VAR's type from "unsigned int" to "int". * command.h (var_zuinteger_unlimited): Update its comments. (add_setshow_zuinteger_unlimited_cmd): Update the declaration. 2013-03-05 Corinna Vinschen * NEWS: Mention new target x86_64-*-cygwin*. 2013-03-05 Corinna Vinschen * configure.host: Add x86_64-*-cygwin* as host. * configure.tgt: Add x86_64-*-cygwin* as target. * config/i386/cygwin64.mh: New file. 2013-03-04 Jan Kratochvil * linespec.c (decode_line_2): Fix duplicate request off by two message. 2013-03-04 Jan Kratochvil * linespec.c (struct linespec_canonical_name): New. (struct linespec_state): Change canonical_names type to it. (add_sal_to_sals): Change variable canonical_name to canonical. Change xrealloc element size. Initialize the different CANONICAL fields. (canonical_to_fullform): New. (filter_results): Use it. Add variables canonical, fullform and cleanup. (struct decode_line_2_item, decode_line_2_compare_items): New. (decode_line_2): Remove variables iter and item_names, add variables items and items_count. Modify the code for these new variables. 2013-03-04 Corinna Vinschen * coff-pe-read.c (read_pe_exported_syms): Don't return without calling do_cleanup. 2013-03-04 Luis Machado * tracepoint.c (build_traceframe_info): Add code for byte order. 2013-03-02 Kevin Buettner * v850-tdep.c: (v850e2_register_name): Revise system register names to match current V850E2M architecture specifications. Update register number enum comments too. 2013-03-01 Jiong Wang Pedro Alves * tilegx-tdep.c (tilegx_analyze_prologue): Limit bundle reading to END_ADDR. (tilegx_skip_prologue): Limit prologue analysis to section end. 2013-03-01 Jan Kratochvil * dwarf2loc.c (call_site_find_chain_1): New variable save_callee_pc, use it. 2013-03-01 Pedro Alves Use gdb_byte for bytes from the program being debugged. * arm-tdep.c (arm_store_return_value, arm_get_longjmp_target): Change type of local 'buf' to gdb_byte. * avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise. * bfin-tdep.c (bfin_push_dummy_call): Likewise. * cris-tdep.c (cris_sigcontext_addr) (cris_sigtramp_frame_unwind_cache): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp) (frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Likewise. * frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise. * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer) (hppa32_hpux_search_dummy_call_sequence) (hppa_hpux_supply_save_state): Likewise. * hppa-linux-tdep.c (insns_match_pattern) (hppa_linux_find_global_pointer): Likewise. * hppa-tdep.c (hppa_in_function_epilogue_p) (skip_prologue_hard_way, hppa_frame_cache): Likewise. * i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise. * i386fbsd-tdep.c (i386fbsd_supply_uthread) (i386fbsd_collect_uthread): Likewise. * ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise. * ia64-tdep.c (examine_prologue, ia64_frame_cache) (ia64_frame_prev_register, ia64_sigtramp_frame_cache) (ia64_sigtramp_frame_prev_register, ia64_access_reg) (ia64_access_rse_reg, ia64_libunwind_frame_this_id) (ia64_libunwind_frame_prev_register) (ia64_libunwind_sigtramp_frame_this_id) (ia64_find_global_pointer_from_dynamic_section) (find_extant_func_descr, find_func_descr, ia64_dummy_id) (ia64_unwind_pc): Likewise. * iq2000-tdep.c (iq2000_store_return_value): Likewise. * m68hc11-tdep.c (m68hc11_push_dummy_call) (m68hc11_extract_return_value): Likewise. * m68klinux-nat.c (fetch_register, store_register): Likewise. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write) (mep_get_insn, mep_push_dummy_call): Likewise. * mips-linux-tdep.c (mips_linux_get_longjmp_target) (mips_linux_in_dynsym_stub): Likewise. * mn10300-tdep.c (mep_pseudo_cr32_write): Likewise. * ppc-linux-nat.c (fetch_register, store_register): Likewise. * regcache.c (dump_endian_bytes): Change type of parameter 'buf' to gdb_byte. * remote-mips.c (mips_set_register): Likewise. * remote-sim.c (gdbsim_fetch_register): Likewise. * score-tdep.c (score7_fetch_inst): Change type of parameter 'memblock' and local 'buf' to gdb_byte. (score7_malloc_and_get_memblock): Change return type to gdb_byte. Change type of local 'buf' to gdb_byte. Adjust. (score7_adjust_memblock_ptr): Change type of parameter 'memblock' to gdb_byte**. (score7_analyze_prologue): Change type of 'memblock' and 'memblock_ptr' locals to gdb_byte*. * sh64-tdep.c (sh64_extract_return_value) (sh64_store_return_value): Change type of local 'buf' to gdb_byte. * solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr): * solib-pa64.c (pa64_solib_create_inferior_hook) (pa64_open_symbol_file_object): Remove local 'buf'. * solib-som.c (som_solib_create_inferior_hook, link_map_start) (som_open_symbol_file_object): Likewise. * solib-spu.c (spu_current_sos): Likewise. * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise. * spu-multiarch.c (parse_spufs_run, spu_fetch_registers) (spu_store_registers): Likewise. * target.c (debug_print_register): Likewise. * tic6x-tdep.c (tic6x_get_longjmp_target): Likewise. * xstormy16-tdep.c (xstormy16_store_return_value) (xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry) (xstormy16_find_jmp_table_entry): Likewise. 2013-03-01 Jiong Wang * tilegx-tdep.c (tilegx_get_longjmp_target): New function. (tilegx_gdbarch_init): Install it. 2013-02-28 Tom Tromey * python/py-arch.c (archpy_disassemble): Use PyInt_Check and PyLong_Check. 2013-02-28 Doug Evans * python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint. * python/python.c (gdbpy_find_pc_line): Ditto. 2013-02-28 Tom Tromey * contrib/excheck.py: New file. * contrib/exsummary.py: New file. * contrib/gcc-with-excheck: New file. 2013-02-28 Tom Tromey * python/python.c (gdbpy_print_stack): Call begin_line and fprintf_filtered inside TRY_CATCH. 2013-02-28 Tom Tromey * python/python.c (gdbpy_find_pc_line): Call find_pc_line inside TRY_CATCH. 2013-02-28 Tom Tromey * py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call frame_object_to_frame_info inside TRY_CATCH. 2013-02-28 Tom Tromey * py-block.c (gdbpy_block_for_pc): Call block_for_pc inside TRY_CATCH. 2013-02-28 Tom Tromey * objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash. 2013-02-27 Corinna Vinschen * windows-nat.c: Throughout, fix format strings and casts of printf-like functions to avoid type related warnings on all platforms. (handle_output_debug_string): Fetch context information address from debug string using string_to_core_addr. 2013-02-27 Jiong Wang * regformats/reg-tilegx.dat (name): Change abi name to "tilegx". * regformats/reg-tilegx32.dat: New. 2013-02-27 Jiong Wang * configure.tgt (tilegx-*-linux*): Enable gdbserver. 2013-02-27 Jiong Wang * configure.tgt (tilegx-*-linux*): Replace whitespace with tab. 2013-02-27 Yao Qi Pedro Alves * tracepoint.c (tfile_trace_find): For tfind pc/tp/range/outside, look for the next trace frame instead of always starting from frame 0. 2013-02-26 Anthony Green * configure.tgt: Add support for moxie-*-rtems* target. 2013-02-25 Pedro Alves * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change warning text. 2013-02-24 Maciej W. Rozycki * mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero if $fp is used as the virtual frame pointer. 2013-02-23 Alan Modra * elfread.c (elf_symtab_read): Do not use udata.p here to find symbol size. * ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function. * ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare. * ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above. * ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise. 2013-02-22 Jan Kratochvil Code cleanup. * elfread.c (build_id_bfd_get): Make the return type const. (build_id_verify): Make the check parameter const. (build_id_to_debug_filename): Make the build_id parameter and variable data const. (find_separate_debug_file_by_buildid): Make the variable build_id const. 2013-02-21 Alan Modra * elfread.c (build_id_bfd_get): Adjust for elf_tdata changes. 2013-02-20 Siva Chandra Reddy Add a new method 'disassemble' to gdb.Architecture class. * python/py-arch.c (archpy_disassmble): Implementation of the new method gdb.Architecture.disassemble. (arch_object_methods): Add entry for the new method. 2013-02-20 Jiong Wang * MAINTAINERS (Write After Approval): Add myself to the list. 2013-02-19 Pedro Alves Garbage collect 'struct monitor_ops'::load_routine. * monitor.h (struct monitor_ops) : Remove field. * monitor.c (monitor_load): No longer call current_monitor->load_routine. * dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'. * m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'. * ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'. 2013-02-19 Pedro Alves PR gdb/15161 Harmonize with generic_load. * monitor.c: Include "readline/readline.h". (monitor_load): Rename parameter 'file' to 'args'. Use build_argv instead of sscanf. Use CORE_ADDR/strtoulst instead of unsigned long/strtol for the 'load_offset' local. Error out if no argument is given or if too many arguments are given. Tilde expand the passed in file name. 2013-02-19 Kai Tietz PR gdb/15161 * symfile.c (load_section_data): Change type of load_offset to CORE_ADDR. (generic_load): User strtoulst instead of strtoul for conversion of load_offset. 2013-02-19 Jiong Wang * tilegx-tdep.c (tilegx_analyze_prologue): add check for for return address, "lr" register, saved on stack. * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg after we invoke tilegx_analyze_prologue. 2013-02-19 Jiong Wang * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed. 2013-02-19 Jiong Wang * tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal. 2013-02-19 Jiong Wang * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro. (tilegx_write_pc): New function. (tilegx_cannot_reference_register): Return zero if REGNO is TILEGX_FAULTNUM_REGNUM. (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc. (tilegx_register_name): Add handling of "faultnum" register. * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM. * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add handling of TILEGX_FAULTNUM_REGNUM. * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM. 2013-02-19 Jiong Wang * tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack should be aligned to 64bit. 2013-02-19 Kai Tietz * windows-nat.c (windows_xfer_memory): Fix debug-output for LLP64. 2013-02-19 Lei Liu * mips-linux-nat.c (mips64_linux_regsets_store_registers): Don't check DSP register number if HAVE_DSP is not set. 2013-02-19 Alan Modra * elfread.c (struct build_id): Delete. Use struct elf_build_id throughout file instead. (build_id_bfd_get): Update to use new elf_tdata build_id field. Don't xmalloc return value. (build_id_verify): Similarly. Don't xfree. (build_id_to_debug_filename): Update. (find_separate_debug_file_by_buildid): Update, don't xfree. 2013-02-18 Tom Tromey PR gdb/15102: * dwarf2read.c (read_subrange_type): Use result of 'check_typedef'. 2013-02-16 Yuanhui Zhang * frame.c: Remove one extra white space after #include directive. 2013-02-15 Jan Kratochvil * contrib/cc-with-tweaks.sh: Extend the comment for -p option. 2013-02-15 Jan Kratochvil * gdb-gdb.gdb.in: Wrap set complaints, b internal_error, b info_command and dir commands into an if block. 2013-02-15 Sanimir Agovic * python/py-breakpoint (struct pybp_code): Use int instead of enum type_code. 2013-02-15 Pedro Alves Hafiz Abid Qadeer * NEWS: Mention new field "trace-file". * tracepoint.c (trace_status_mi): Output "trace-file" field. (tfile_open): Record the trace file's filename in the trace status. (tfile_files_info): Mention the name of the trace file. Check the "filename" field explicitely. (trace_status_command): Explicitely check "filename" field. (trace_find_command): Ditto. (trace_find_pc_command): Ditto. (trace_find_tracepoint_command): Ditto. (trace_find_line_command): Ditto. (trace_find_range_command): Ditto. (trace_find_outside_command): Ditto. * tracepoint.h (struct trace_status) : Rename it to "filename" and make it hold the trace file's filename instead of a boolean. * remote.c (remote_get_trace_status): Initialize "filename" field with NULL instead of 0. 2013-02-15 Yao Qi * remote.c: Fix a typo. 2013-02-14 Pierre Muller * contrib/ari/gdb_ari.sh (GNU/Linux rule): Remove. 2013-02-14 Pedro Alves * utils.c (savestring): Don't #undef it. Move function to common/common-utils.c. * common/common-utils.c: Include gdb_string.h. (savestring): Move here from utils.c. * common/common-utils.h (savestring): Declare. 2013-02-14 Pedro Alves * utils.c (savestring): Rename parameter 'size' to 'len'. 2013-02-14 Pedro Alves Yufeng Zhang * aarch64-linux-nat.c (aarch64_init_debug_reg_state): Delete. (aarch64_inferior_data, struct aarch64_inferior_data): Delete. (struct aarch64_process_info): New. (aarch64_process_list): New global. (aarch64_find_process_pid, aarch64_add_process) (aarch64_process_info_get): New functions. (aarch64_inferior_data_get): Delete. (aarch64_process_info_get): New function. (aarch64_forget_process): New function. (aarch64_get_debug_reg_state): New parameter 'pid'. Reimplement. (aarch64_linux_prepare_to_resume): Pass the lwp's pid to aarch64_get_debug_reg_state. (aarch64_notify_debug_reg_change): Use iterate_over_lwps instead of linux_nat_iterate_watchpoint_lwps. (aarch64_linux_new_fork): New function. (aarch64_linux_child_post_startup_inferior): Use aarch64_forget_process instead of aarch64_init_debug_reg_state. (aarch64_handle_breakpoint, aarch64_linux_insert_hw_breakpoint) (aarch64_linux_remove_hw_breakpoint) (aarch64_handle_aligned_watchpoint) (aarch64_handle_unaligned_watchpoint) (aarch64_linux_insert_watchpoint) (aarch64_linux_remove_watchpoint) (aarch64_linux_stopped_data_address): Adjust to pass the current process id to aarch64_debug_reg_state. (_initialize_aarch64_linux_nat): Install aarch64_linux_new_fork as linux_nat_new_fork hook, and aarch64_forget_process as linux_nat_forget_process hook; remove the call to register_inferior_data_with_cleanup. 2013-02-14 Pedro Alves * eval.c (evaluate_subexp_for_address) : Swap and handle TYPE_CODE_REF before lval_memory. 2013-02-14 Pedro Alves Hafiz Abid Qadeer * tracepoint.h (validate_trace_state_variable_name): Declare. * tracepoint.c (validate_trace_state_variable_name): New. (trace_variable_command): Parse the trace state variable's name without using parse_expression. Do several validations. * mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the trace state variable's name with parse_expression. Validate it. 2013-02-14 Yao Qi * infcmd.c (breakpoint_proceeded): Remove it. 2013-02-14 Yao Qi * tracepoint.c (end_actions_pseudocommand): Make it static. (while_stepping_pseudocommand): Likewise. * tracepoint.h (end_actions_pseudocommand): Remove the declaration. (while_stepping_pseudocommand): Likewise. 2013-02-14 Yao Qi * cli/cli-decode.c (help_cmd): Remove the declaration of "cmdlist". (help_all): Likewise. 2013-02-13 Pedro Alves * amd64-linux-nat.c (update_debug_registers_callback): Update comment. (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use iterate_over_lwps. (amd64_linux_prepare_to_resume): Pass the lwp's pid to i386_debug_reg_state. (amd64_linux_new_fork): New function. (_initialize_amd64_linux_nat): Install amd64_linux_new_fork as linux_nat_new_fork hook, and i386_forget_process as linux_nat_forget_process hook. * i386-linux-nat.c (update_debug_registers_callback): Update comment. (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use iterate_over_lwps. (i386_linux_prepare_to_resume): Pass the lwp's pid to i386_debug_reg_state. (i386_linux_new_fork): New function. (_initialize_i386_linux_nat): Install i386_linux_new_fork as linux_nat_new_fork hook, and i386_forget_process as linux_nat_forget_process hook. * i386-nat.c (i386_init_dregs): Delete. (i386_inferior_data, struct i386_inferior_data): Delete. (struct i386_process_info): New. (i386_process_list): New global. (i386_find_process_pid, i386_add_process, i386_process_info_get): New functions. (i386_inferior_data_get): Delete. (i386_process_info_get): New function. (i386_debug_reg_state): New parameter 'pid'. Reimplement. (i386_forget_process): New function. (i386_cleanup_dregs): Rewrite. (i386_update_inferior_debug_regs, i386_insert_watchpoint) (i386_remove_watchpoint, i386_region_ok_for_watchpoint) (i386_stopped_data_address, i386_insert_hw_breakpoint) (i386_remove_hw_breakpoint): Adjust to pass the current process id to i386_debug_reg_state. (i386_use_watchpoints): Don't register inferior data. * i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and adjust comment. (i386_forget_process): Declare. * linux-fork.c (delete_fork): Call linux_nat_forget_process. * linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook): New static globals. (linux_child_follow_fork): Don't call linux_nat_new_thread here. (add_initial_lwp): New, factored out from ... (add_lwp): ... this. Don't check the number of lwps before calling linux_nat_new_thread. (linux_nat_iterate_watchpoint_lwps): Delete. (linux_nat_attach): Use add_initial_lwp instead of add_lwp. (linux_handle_extended_wait): Call the linux_nat_new_fork hook on forks and vforks. (linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the initial lwp. (linux_nat_kill, linux_nat_mourn_inferior): Call linux_nat_forget_process. (linux_nat_set_new_fork, linux_nat_set_forget_process) (linux_nat_forget_process): New functions. * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete type. (linux_nat_iterate_watchpoint_lwps): Delete declaration. (linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New types. (linux_nat_set_new_fork, linux_nat_set_forget_process) (linux_nat_forget_process): New declarations. * amd64fbsd-nat.c (super_mourn_inferior): New global. (amd64fbsd_mourn_inferior): New function. (_initialize_amd64fbsd_nat): Override to_mourn_inferior. * windows-nat.c (windows_detach): Call i386_cleanup_dregs. 2013-02-13 Marcus Shawcroft * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Adding _(). 2013-02-13 Marcus Shawcroft * aarch64-linux-nat.c (debug_reg_change_callback) (aarch64_linux_get_debug_reg_capacity): ARI fix: Replace %llx with %s and phex(). 2013-02-13 Marcus Shawcroft * aarch64-linux-nat.c (dr_changed_t): ARI fix: Replace long long with LONGEST. 2013-02-13 Pedro Alves Hafiz Abid Qadeer * c-lang.c (c_op_print_tab): Add entry for UNOP_PLUS. 2013-02-12 Tom Tromey PR symtab/11464: * c-exp.y (lex_one_token): Initialize other fields of yylval on NAME return. (classify_inner_name): Remove 'first_name' argument, add 'context'. Remove unused variable. (yylex): Explicitly maintain the context type. Exit loop earlier if NAME result is seen. 2013-02-12 Pedro Alves * amd64-darwin-tdep.c: Add (C) after Copyright. * cli/cli-cmds.h: Ditto. * cli/cli-decode.c: Ditto. * cli/cli-decode.h: Ditto. * cli/cli-dump.c: Ditto. * cli/cli-dump.h: Ditto. * cli/cli-interp.c: Ditto. * cli/cli-logging.c: Ditto. * cli/cli-script.c: Ditto. * cli/cli-script.h: Ditto. * cli/cli-setshow.c: Ditto. * cli/cli-setshow.h: Ditto. * cli/cli-utils.c: Ditto. * cli/cli-utils.h: Ditto. * config/alpha/nm-osf3.h: Ditto. * config/djgpp/djconfig.sh: Ditto. * config/i386/nm-fbsd.h: Ditto. * config/i386/nm-i386gnu.h: Ditto. * config/nm-linux.h: Ditto. * config/nm-nto.h: Ditto. * config/rs6000/nm-rs6000.h: Ditto. * config/sparc/nm-sol2.h: Ditto. * darwin-nat-info.c: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * gdb-demangle.h: Ditto. * i386-darwin-nat.c: Ditto. * i386-darwin-tdep.c: Ditto. * linux-fork.h: Ditto. * m32c-tdep.c: Ditto. * microblaze-linux-tdep.c: Ditto. * microblaze-rom.c: Ditto. * microblaze-tdep.c: Ditto. * microblaze-tdep.h: Ditto. * mips-linux-tdep.h: Ditto. * ppc-ravenscar-thread.c: Ditto. * ppc-ravenscar-thread.h: Ditto. * prologue-value.c: Ditto. * prologue-value.h: Ditto. * ravenscar-thread.c: Ditto. * ravenscar-thread.h: Ditto. * sparc-ravenscar-thread.c: Ditto. * sparc-ravenscar-thread.h: Ditto. * tilegx-linux-tdep.c: Ditto. * unwind_stop_reasons.def: Ditto. * windows-nat.h: Ditto. * xtensa-linux-tdep.c: Ditto. * xtensa-xtregs.c: Ditto. * regformats/regdat.sh: Ditto. * regformats/regdef.h: Ditto. 2013-02-12 Pedro Alves * break-catch-sig.c: Update copyright years. 2013-02-11 Siva Chandra Reddy Add support for a destructor for ui_out data and use it to provide a ui_out destructor. * ui-out.h: Declare the new ui_out destructor. (ui_out_impl): Add a field for data destructor in ui_out_impl. * ui-out.c (default_data_destroy): Add a default data destructor which does nothing. (default_ui_out_impl): Set the new data_destroy field to default_data_destroy (uo_data_destroy): Local function which invokes the data destructor if present. (clear_table): Local function which clears the table data of a ui_out object. (ui_out_destroy): Public function which frees a ui_out object. (ui_out_table_end): Use the new clear_table function. * cli-out.c (cli_ui_out_impl): Set the new data_destroy field to NULL. * mi/mi-out.c (mi_ui_out_impl): Set the new data_destroy field to NULL. 2013-02-11 Doug Evans * printcmd.c (printf_c_string,printf_wide_c_string): New functions. (printf_decfloat): New function. Broken out from ui_printf. Remove unnecessary code to shift the entire format string down. (printf_pointer): New function. (ui_printf): Code to print C strings, wide C strings, decfloats, and pointers moved to separate functions. 2013-02-11 Sergio Durigan Junior * valops.c (value_assign): Handling bitfield offset in `lval_internalvar_component' case. 2013-02-08 Doug Evans * common/format.c (parse_format_string): Fix whitespace. 2013-02-08 Matthew Gretton-Dann * stack.c (return_command): Work around uninitialized variable warning. 2013-02-08 Yufeng Zhang * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET): Change the number of the registers from 36 to 34. 2013-02-08 Marcus Shawcroft * NEWS: Mention new AArch64 native and target support. 2013-02-08 Marcus Shawcroft * MAINTAINERS (Write After Approval): Add myself. 2013-02-08 Jim MacArthur Marcus Shawcroft Nigel Stephens Yufeng Zhang * aarch64-linux-nat.c: New file. * config/aarch64/linux.mh: New file. * configure.host: Add AArch64. * Makefile.in (ALLDEPFILES): Add aarch64-linux-nat.c. 2013-02-07 Doug Evans * cli/cli-cmds.c (_initialize_cli_cmds): Clarify argument to disassemble command. 2013-02-07 Marcus Shawcroft * aarch64-linux-tdep.c (aarch64_linux_init_abi): Call set_gdbarch_fetch_tls_load_module_address. 2013-02-06 David S. Miller * sparc-tdep.c (sparc32_return_value): Handle writing return value when using RETURN_VALUE_ABI_PRESERVES_ADDRESS. * value.c (struct_return_convention): New function. (using_struct_return): Implement in terms of struct_return_convention. * value.h (struct_return_convention): Declare. * stack.c (return_command): Allow successful overriding of the return value when RETURN_VALUE_ABI_PRESERVES_ADDRESS. 2013-02-06 Tom Tromey * python/py-type.c (typy_strip_typedefs): Don't call check_typedef outside of TRY_CATCH. 2013-02-06 Yao Qi * mi/mi-interp.c: Include "tracepoint.h". (mi_tsv_modified): Declare. (mi_tsv_created, mi_tsv_deleted): Update declaration. (mi_interpreter_init): Call observer_attach_tsv_modified. (mi_tsv_modified): New. (mi_tsv_created, mi_tsv_deleted): Update. * tracepoint.c (trace_variable_command): Call observer_notify_tsv_modified if the initial value of tsv is changed. (delete_trace_state_variable): Call observer_notify_tsv_deleted earlier. (trace_variable_command): Caller update. (create_tsv_from_upload): Likewise. * observer.sh: Declare "struct trace_state_variable". * NEWS: Mention the new MI notification "=tsv-modified". 2013-02-05 Doug Evans * completer.c (location_completer): Fix typo in comment. 2013-02-05 Jan Kratochvil * breakpoint.c (add_location_to_breakpoint): Insert the location with ADDRESS sorted. 2013-02-05 Marcus Shawcroft * aarch64-tdep.c (aarch64_analyze_prologue): ARI fix: Refactor if statement to avoid trailing || operator. 2013-02-05 Andreas Tobler * NEWS: Add PowerPC FreeBSD as a new native configuration. 2013-02-04 Andreas Tobler * Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files. * configure.host: Add powerpc*-*-freebsd* target. * configure.tgt: Add target info for powerpc*-*-freebsd*. * ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files. * config/powerpc/fbsd.mh: New file. 2013-02-04 Sergio Durigan Junior Denys Vlasenko Pedro Alves * gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook. (struct elf_internal_linux_prpsinfo): Forward declare. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include `cli/cli-utils.h'. (linux_fill_prpsinfo): New function. (linux_make_corefile_notes): Use linux_fill_prpsinfo. If there's an elfcore_write_linux_prpsinfo hook, use it, otherwise, use elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64 depending on gdbarch pointer bitness. * ppc-linux-tdep.c: Include elf-bfd.h. (ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32 on 32-bit. 2013-02-04 Jim MacArthur Marcus Shawcroft Nigel Stephens Yufeng Zhang * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes. 2013-02-04 Jim MacArthur Marcus Shawcroft Nigel Stephens Yufeng Zhang * aarch64-newlib-tdep.c: New file. * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of aarch64*-*-elf. * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB. * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o. (ALLDEPFILES): Add aarch64-newlib-tdep.c. * osabi.c (gdb_osabi_names): Add "Newlib". 2013-02-04 Jim MacArthur Marcus Shawcroft Nigel Stephens Yufeng Zhang * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o. (ALLDEPFILES): Add aarch64-linux-tdep.c. * aarch64-linux-tdep.c: New file. * aarch64-linux-tdep.h: New file. * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset. * configure.tgt: Add aarch64-none-linux-gnu. 2013-02-04 Jim MacArthur Marcus Shawcroft Nigel Stephens Yufeng Zhang * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o. (HFILES_NO_SRCDIR): Add aarch64-tdep.h. (ALLDEPFILES): Add aarch64-tdep.c. * aarch64-tdep.c: New file. * aarch64-tdep.h: New file. * configure.tgt: Add AArch64. * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu. (aarch64-expedite): New definition. * features/aarch64-core.xml: New file. * features/aarch64-fpu.xml: New file. * features/aarch64-without-fpu.c: New file (generated). * features/aarch64-without-fpu.xml: New file. * features/aarch64.c: New file (generated). * features/aarch64.xml: New file. * regformats/aarch64-without-fpu.dat: New file (generated). * regformats/aarch64.dat: New file (generated). 2013-02-03 Jan Kratochvil * contrib/expect-read1.c: New file. * contrib/expect-read1.sh: New file. 2013-02-03 Jan Kratochvil * dwarf2read.c (file_file_name): New function with code from file_full_name. (file_full_name): Move most of the code to file_file_name. (macro_start_file): Rename variable full_name to file_name and use file_file_name for it. Add comp_dir parameter to new_macro_table. * macrocmd.c (show_pp_source_pos): New variable fullname. Replace any macro_source_file->filename access by macro_source_fullname call. * macroscope.c (_initialize_macroscope): Update the new_macro_table caller. * macrotab.c (struct macro_table): New field comp_dir. (macro_include): New variables link_fullname and source_fullname. Replace any macro_source_file->filename access by macro_source_fullname call. (macro_lookup_inclusion): Remove the partial filenames checking code. (check_for_redefinition): New variables source_fullname and found_key_fullname. Replace any macro_source_file->filename access by macro_source_fullname call. (macro_undef): New variables source_fullname and key_fullname. Replace any macro_source_file->filename access by macro_source_fullname call. (macro_lookup_definition): New variables retval and source_fullname. Replace any macro_source_file->filename access by macro_source_fullname call. (foreach_macro): New variable key_fullname. Replace any macro_source_file->filename access by macro_source_fullname call. (foreach_macro_in_scope): New variable datum_fullname. Replace any macro_source_file->filename access by macro_source_fullname call. (new_macro_table): Add parameter comp_dir. Initialize T with it. (macro_source_fullname): New function. * macrotab.h (struct macro_source_file): Extent the filename field comment. (new_macro_table): New parameter comp_dir, add a comment for it. (macro_source_fullname): new declaration. 2013-02-03 Jan Kratochvil * dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable this_real_name to outer block. Use it also for compare_filenames_for_search. (dw2_expand_symtabs_matching): New variable this_real_name. Use it with dw2_get_real_path for file_matcher, considering also BASENAMES_MAY_DIFFER. (file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS. 2013-02-03 Jan Kratochvil * dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter to the file_matcher parameter. Pass 0 to it. (dwarf2_create_include_psymtab): Copy also DIRNAME. * psymtab.c (partial_map_symtabs_matching_filename): Drop handling of NULL psymtab_to_fullname result. (psymtab_to_fullname): Remove variable r. Never return NULL, assemble an expected filename instead. (expand_symtabs_matching_via_partial): Add basenames parameter to the file_matcher parameter. Call also psymtab_to_fullname, after newly considering BASENAMES_MAY_DIFFER. * source.c (rewrite_source_path): Remove static. * source.h (rewrite_source_path): New declaration. * symfile.h (struct quick_symbol_functions): Add basenames parameter to the expand_symtabs_matching field. Comment it. * symtab.c (file_matches): New function comment. Add parameter basenames, implement it. (search_symbols_file_matches): Add basenames parameter. Update the file_matches caller. (search_symbols): Match FILES also against symtab_to_fullname. Optimize it for BASENAMES_MAY_DIFFER. 2013-02-03 Jan Kratochvil * source.c (print_source_lines_base): Print for TUI also "fullname". * tui/tui-data.c (init_content_element): Change tui_locator_element field to full_name. * tui/tui-data.h (struct tui_locator_element): Likewise. * tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename tui_update_locator_filename calls to tui_update_locator_fullname. Replace symtab->filename refererence by symtab_to_fullname call. * tui/tui-out.c (tui_field_string): Check for "fullname" now. * tui/tui-source.c (tui_set_source_content): Change tui_locator_element field to full_name. Replace symtab->filename refererence by symtab_to_fullname call. (tui_show_symtab_source): Rename parameter to fullname. Change tui_locator_element field to full_name. * tui/tui-stack.c: Include source.h. (tui_set_locator_filename): Rename the declaration to ... (tui_set_locator_fullname): ... here. Rename its parameter to fullname, updates its comment. (tui_set_locator_info): Rename its parameter to fullname. (tui_set_locator_filename): Rename the definition to ... (tui_set_locator_fullname): ... here. Rename its parameter to fullname, updates its comment. Change tui_locator_element field to full_name. (tui_set_locator_info): Rename its parameter to fullname. (tui_set_locator_info): Rename callee to tui_set_locator_fullname. (tui_update_locator_filename): Rename to ... (tui_update_locator_fullname): ... here. Rename callee to tui_set_locator_fullname. (tui_show_frame_info): Replace symtab->filename refererence by symtab_to_fullname call. * tui/tui-stack.h (tui_update_locator_filename): Rename to ... (tui_update_locator_fullname): ... here. * tui/tui-winsource.c (tui_display_main): Rename the callee to tui_update_locator_fullname. Replace symtab->filename refererence by symtab_to_fullname call. * tui/tui.c (tui_show_source): Rename its parameter to fullname. Rename the callee to tui_update_locator_fullname. * tui/tui.h (tui_show_source): Rename its parameter to fullname. 2013-02-03 Jan Kratochvil * ada-lang.c (user_select_syms): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise. (clear_command): New variable sal_fullname, initialize it. Replace compare_filenames_for_search by filename_cmp with sal_fullname. (say_where, update_static_tracepoint): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec): Likewise. * dwarf2read.c: Include source.h. (fixup_go_packaging): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * linespec.c (add_sal_to_sals): Rename variable filename to fullname. Replace symtab->filename refererences by symtab_to_filename_for_display calls. (create_sals_line_offset, convert_linespec_to_sals): New variable fullname, initialize it, replace symtab->filename reference by the variable. * linux-fork.c: Include source.h. (info_checkpoints_command): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * macroscope.c (sal_macro_scope): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * mdebugread.c: Include source.h. (psymtab_to_symtab_1): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file) (mi_cmd_file_list_exec_source_files): Likewise. * printcmd.c: Include source.h. (build_address_symbolic): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * psymtab.c (partial_map_symtabs_matching_filename) (read_psymtabs_with_fullname): Call compare_filenames_for_search also with psymtab_to_fullname. * python/py-symtab.c (stpy_str): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (stpy_get_filename): New variable filename, initialize it, use instead of symtab->filename refererences. (salpy_str): Make variable filename const char *. Replace symtab->filename refererences by symtab_to_filename_for_display calls. * skip.c: Include source.h and filenames.h. (skip_file_command): Remove const from the symtab variable. Replace symtab->filename refererences by symtab_to_fullname call. (function_name_is_marked_for_skip): New variables searched_for_fullname and fullname. Use them to search also with symtab's fullname. * source.c (find_source_lines): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (print_source_lines_base): New variable filename, use it instead of symtab->filename. Replace symtab->filename refererences by symtab_to_filename_for_display calls. (line_info, forward_search_command): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (reverse_search_command): Replace symtab->filename refererences by symtab_to_filename_for_display calls. New variable filename for it. * stack.c (frame_info): Likewise. * symmisc.c: Include source.h. (dump_objfile, dump_symtab_1, maintenance_print_symbols) (maintenance_info_symtabs): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * symtab.c (iterate_over_some_symtabs): Call compare_filenames_for_search also with symtab_to_fullname. (lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (find_line_symtab): Replace symtab->filename refererences by symtab_to_filename_for_display calls. (file_matches): Replace filename_cmp by compare_filenames_for_search. (print_symbol_info): Make the last parameter const char *. New variable s_filename. Use it in the function. (symtab_symbol_info): Make the last_filename variable const char *. Replace symtab->filename refererences by symtab_to_filename_for_display calls. (rbreak_command): New variable fullname. Use it. Replace symtab->filename refererence by symtab_to_filename_for_display call. * tracepoint.c (set_traceframe_context, trace_find_line_command) (print_one_static_tracepoint_marker): Replace symtab->filename refererences by symtab_to_filename_for_display calls. * tui/tui-source.c (tui_set_source_content): New variables filename and s_filename. Replace symtab->filename refererences by this variable. Replace other symtab->filename refererences by symtab_to_filename_for_display calls. 2013-02-03 Eldar Gaynetdinov Jan Kratochvil Add a new variable that controls a way in which filenames are displayed. * NEWS (set filename-display): New entry. * source.c (filename_display_basename, filename_display_relative) (filename_display_absolute, filename_display_kind_names) (filename_display_string, show_filename_display_string) (symtab_to_filename_for_display): New. (_initialize_source): Added initialization of 'filename-display' variable. * source.h (symtab_to_filename_for_display): Added declaration. * stack.c (print_frame): Added new variable and calling of a new function and condition with this variable. Changed third argument of calling of a function. 2013-02-03 Jan Kratochvil * tui/tui-data.c (init_win_info, tui_del_window, tui_free_window): Rename field reference filename to fullname. * tui/tui-data.h (struct tui_source_info): Rename field filename to fullname. New comment for it. * tui/tui-source.c (tui_set_source_content): Rename field reference filename to fullname. Initialize field by symtab_to_fullname now. * tui/tui-winsource.c (tui_update_breakpoint_info): Rename field reference filename to fullname. Use symtab_to_fullname during comparison. 2013-02-03 Jan Kratochvil Code cleanup. * dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ... (dw2_expand_symtabs_with_fullname): ... here. Rename parameter filename to fullname. Rename variable this_name to this_fullname. Lowercase FILENAME_CMP call. (dw2_find_symbol_file): New comment for the returned string. (dwarf2_gdb_index_functions): Rename the function to dw2_expand_symtabs_with_fullname. * psymtab.c (read_psymtabs_with_filename): Rename to ... (read_psymtabs_with_fullname): ... here. Rename parameter filename to fullname. (psym_functions): Rename the function to read_psymtabs_with_fullname. * symfile.h (struct quick_symbol_functions): Rename field expand_symtabs_with_filename to expand_symtabs_with_fullname and its parameter filename to fullname. Document returned string meaning for find_symbol_file. * symtab.c (find_line_symtab): Rename the called function to expand_symtabs_with_fullname. 2013-02-03 Jan Kratochvil Code cleanup. * breakpoint.c (clear_command): Remove variable is_abs, unify the call of filename_cmp with compare_filenames_for_search. * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable is_abs, unify the call of FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for real_path and name. Unify the call of compare_filenames_for_search with FILENAME_CMP. * psymtab.c (partial_map_symtabs_matching_filename): Likewise. * symfile.h (struct quick_symbol_functions): Extend the comment for map_symtabs_matching_filename. * symtab.c (compare_filenames_for_search): Remove the function comment relative path requirement. Handle absolute filenames, with a comment. (iterate_over_some_symtabs): Remove variable is_abs, unify the call of FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for real_path and name. Unify the call of compare_filenames_for_search with FILENAME_CMP. (iterate_over_symtabs): New gdb_assert on REAL_PATH. 2013-02-03 Jan Kratochvil Code cleanup. * breakpoint.c (print_breakpoint_location): Replace bp_location field source_file references by symtab field references. Remove variables sal and fullname. (momentary_breakpoint_from_master, add_location_to_breakpoint): (clear_command, say_where): Replace bp_location field source_file references by symtab field references. (bp_location_dtor): Remove the source_file reference. (update_static_tracepoint): Replace bp_location field source_file references by symtab field references. (breakpoint_free_objfile): New function. * breakpoint.h (struct bp_location): Extend the comment for line_number. Replace the field source_file by field symtab, extend its comment. (breakpoint_free_objfile): New declaration. * objfiles.c (free_objfile): Call breakpoint_free_objfile. * tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location field source_file references by symtab field references. 2013-02-03 Jan Kratochvil Replace xfullpath calls by gdb_realpath calls. * cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the function comment. * dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path. Remove it from the iterate_over_some_symtabs call. (dw2_map_symtabs_matching_filename): Remove parameter full_path. Remove it from the dw2_map_expand_apply calls, remove a block handling it. * psymtab.c (partial_map_expand_apply): Remove parameter full_path. Remove it from the iterate_over_some_symtabs call. (partial_map_symtabs_matching_filename): Remove parameter full_path. Remove it from the partial_map_expand_apply calls, remove a block handling it. Drop gdb_realpath call and cleanups from the real_path handling. * source.c (openp): Drop the comment part about xfullpath. Replace xfullpath calls by gdb_realpath calls. (find_and_open_source): Replace xfullpath call by gdb_realpath call. * symfile.h (struct quick_symbol_functions): Remove parameter full_path from method map_symtabs_matching_filename and its comment. * symmisc.c (maintenance_print_msymbols): Replace xfullpath call by gdb_realpath call. * symtab.c (iterate_over_some_symtabs): Remove parameter full_path, remove it also from the function comment, remove a block handling it. Drop gdb_realpath call and cleanups from the real_path handling. (iterate_over_symtabs): Drop variable full_path and its use. * symtab.h (iterate_over_some_symtabs): Remove parameter full_path. * utils.c (xfullpath): Remove. * utils.h (xfullpath): Remove. 2013-02-01 Andreas Tobler * Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o. (HFILES_NO_SRCDIR): Add ppc64-tdep.h. (ALLDEPFILES): Add ppc64-tdep.c. * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add ppc64-tdep.o to gdb_target_obs. * ppc64-tdep.h: New file. * ppc64-tdep.c: New file. (insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from ppc-linux-tdep.c to here. (PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN) (PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target) (ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move from ppc-linux-tdep.c to here. (ppc64_convert_from_func_ptr_addr): Rename from ppc64_linux_convert_from_func_ptr_addr to ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to here. * rs6000-tdep.c: (read_insn): Move from ppc-linux-tdep.c to here. (insns_match_pattern, insn_d_field, insn_ds_field): Move from ppc-linux-tdep.c to here and rename them with the ppc_ prefix. * ppc-linux-tdep.c: Include ppc64-tdep.h. Removed above functions. (ppc_linux_init_abi): Adjust. 2013-02-01 Aleksandar Ristovski * ada-valprint.c (ada_print_floating): Remove unused 'len'. 2013-02-01 Aleksandar Ristovski * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'. 2013-02-01 Pedro Alves * dummy-frame.c (deprecated_pc_in_call_dummy): Delete function. * frame.h (deprecated_pc_in_call_dummy): Delete declaration. 2013-02-01 Jan Kratochvil * elfread.c (elf_symfile_read): Limit separate debug info additions to files with no separate debug info. * objfiles.c (add_separate_debug_objfile): Add gdb_assert calls. * symfile.c (read_symbols): Call find_separate_debug_file_in_section only for files with no separate debug info. 2013-01-31 Tom Tromey * jit.c (jit_program_space_data): Rename from jit_inferior_data; change type. (struct jit_program_space_data): Rename from jit_inferior_data. Update comments. (get_jit_program_space_data): Rename from get_jit_inferior_data. Change return type. Attach data to program space. (jit_program_space_data_cleanup): Rename from jit_inferior_data_cleanup; change argument type. (jit_read_descriptor): Change 'inf_data' argument to 'ps_data', change type. (jit_register_code): Update. (jit_update_inferior_cache): Remove. (jit_breakpoint_deleted): Get jit data from the location's program space. (jit_breakpoint_re_set_internal): Rename 'inf_data' argument to 'ps_data', change type. (jit_inferior_init, jit_breakpoint_re_set_internal) (jit_event_handler): Update. (free_objfile_data): Get data from objfile's program space. (_initialize_jit): Update. 2013-01-31 Tom Tromey PR gdb/13987: * jit.c (struct jit_inferior_data) : New fields. (jit_breakpoint_re_set_internal): Fix logging. Only create breakpoint if cached address has changed. (jit_update_inferior_cache, jit_breakpoint_deleted): New functions. (_initialize_jit): Register breakpoint deleted observer. 2013-01-31 Aleksandar Ristovski * infrun.c (handle_syscall_event): Remove unused gdbarch. (save_infcall_suspend_state): Ifdef out unused inf. (restore_infcall_suspend_state): Ifdef out unused inf. * jit.c (jit_register_code): Remove unused i, b, inf_data. (jit_frame_sniffer): Remove unused inf_data. 2013-01-31 Aleksandar Ristovski * c-exp.y (classify_inner_name): Remove unused type. * c-lang.c (c_printstr): Remove unused byte_order, i, things_printed, in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished, need_escape. (c_get_string): Remove unused kind. * c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2. 2013-01-31 Aleksandar Ristovski * charset.c (intermediate_encoding): Remove unused i. * completer.c (signal_completer): Remove unused i. * continuations.c (discard_my_continuations_1): Remove unused continuation_ptr. * corelow.c (core_close): Remove unuseD name. (get_core_siginfo): Remove unused pid. * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused i, cps. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset. (loclist_describe_location): Remove unused first. * event-top.c (command_line_handler): Remove unused got_eof. * exec.c (exec_close_1): Remove unused need_symtab_cleanup. (resize_section_table): Remove unused old_value. * gdb_bfd.c (gdb_bfd_map_section): Remove unused header. * gnu-v3-abi.c (compute_vtable_size): Remove unused addr. * i386-tdep.c (i386_process_record): Remove unused rex. * infcmd.c (get_return_value): Remove unused uiout. * jv-lang.c (type_from_class): Remove unused is_array. * jv-valprint.c (java_val_print): Remove unused i. * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid. * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid. * m2-typeprint.c (m2_print_type): Remove unused code. * macroexp.c (get_character_constant): Remove unused body_start. (macro_stringify): Remove unused result. * objc-lang.c (find_methods): Remove unused gdbarch. * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2. * regcache.c (regcache_cooked_read): Remove unused gdbarch. * stack.c (print_frame_args): Remove unused summary. * thread.c (thread_apply_command): Remove unused p. * valarith.c (value_x_unop): Remove unused mangle_ptr. * valops.c (search_struct_method): Remove unused skip. * valprint.c (generic_val_print): Remove unused byte_order. * varobj.c (varobj_update): Remove unused changed. * cli/cli-cmds.c (complete_command): Remove unused next_item. (alias_command): Remove unused c. * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c. * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused format. (mi_cmd_data_write_memory): Remove unused word_format. (mi_cmd_data_write_memory_bytes): Remove unused r. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused p_start, p_end. * python/python.c (_initialize_python): Remove unused cmd_name, cmd. * tui/tui-disasm.c (tui_set_disassem_content): Remove unused line_width. 2013-01-31 Aleksandar Ristovski * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs. * symtab.c (iterate_over_symtabs): Remove unused s. (find_pc_sect_symtab): Remove unused pspAce. (find_pc_sect_line): Remove unused alt_symtab. (find_pcs_for_symtab_line): Remove unused ix, previous_function. (completion_list_add_name): Remove unused newsize. 2013-01-31 Tom Tromey PR c++/14998: * dwarf2read.c (read_tag_ptr_to_member_type): Handle TYPE_CODE_FUNC. 2013-01-31 Aleksandar Ristovski * target.c (target_read_string): Remove unused origlen. 2013-01-31 Aleksandar Ristovski * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec. * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt. * ax-general.c (ax_print): Remove unused is_float. * blockframe.c (block_innermost_frame): Remove unused start, end. * break-catch-sig.c (catch_signal_command): Remove unused gdbarch. 2013-01-31 Aleksandar Ristovski * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo. (svr4_read_so_list): Remove unused lmo. * solib-target.c (solib_target_relocate_section_addresses): Remove unused flags. 2013-01-30 Tom Tromey * hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0". 2013-01-30 Tom Tromey * symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32. * utils.c (gnu_debuglink_crc32): Remove. * utils.h (gnu_debuglink_crc32): Don't declare. 2013-01-30 Tom Tromey * dwarf2read.c (compute_delayed_physnames, read_call_site_scope) (read_structure_type, read_enumeration_type): Remove cast. 2013-01-30 Tom Tromey * dwarf2read.c (read_namespace_type): Remove cast. (read_typedef): Likewise. 2013-01-29 Tom Tromey * dwarf2read.c (free_dwo_file): Remove assert. 2013-01-29 Tom Tromey * value.c (deprecated_set_value_modifiable): Remove. * value.h (deprecated_set_value_modifiable): Remove. 2013-01-28 Doug Evans * dwarf2loc.c (dwarf2_find_location_expression): Don't add base address to addresses from dwo files. 2013-01-25 Siva Chandra Reddy * valops.c (find_overload_match): Remove unused argument 'lax'. * value.h: Remove unused argument 'lax' from the declaration of find_overload_match. * eval.c (value_subexp_standard): Do not pass a 'lax' argument to find_overload_match. * valarith.c (value_user_defined_cpp_op): Do not pass a 'lax' argument to find_overload_match. 2013-01-25 Tom Tromey * dwarf2read.c (processing_has_namespace_info): Remove. (struct dwarf2_cu) : New field. (process_die, read_func_scope, dwarf2_start_symtab) (new_symbol_full): Update. 2013-01-25 Tom Tromey * cp-namespace.c (cp_set_block_scope): Remove. * cp-support.h (cp_set_block_scope): Remove. * dbxread.c: Include block.h. (cp_set_block_scope): New function. (process_one_symbol): Update. * dwarf2read.c (read_func_scope): Use block_set_scope. 2013-01-25 Pedro Alves * remote.c (add_current_inferior_and_thread): Tweak comment. 2013-01-25 Tom Tromey * cp-namespace.c (cp_scan_for_anonymous_namespaces): Update. (cp_add_using_directive): Add 'copy_names' argument. * cp-support.h (cp_add_using_directive): Update. (struct using_direct) : Now const. * dwarf2read.c (read_import_statement): Use obconcat. Don't copy names passed to cp_add_using_directive. 2013-01-25 Tom Tromey * c-exp.y (qualified_name): Use TYPE_SAFE_NAME. 2013-01-25 Pedro Alves * remote.c (stop_reply_extract_thread): New. (add_current_inferior_and_thread): New parameter 'wait_status'. Handle it. (remote_start_remote): Pass wait status to add_current_inferior_and_thread. (extended_remote_run): Update comment. (extended_remote_create_inferior_1): Pass wait status to add_current_inferior_and_thread. 2013-01-25 Andrew Burgess Ulrich Weigand * valarith.c (value_vector_widen): New function for replicating a scalar into a vector. (value_binop): Use value_vector_widen to widen scalar to vector rather than casting, this better matches gcc C behaviour. * valops.c (value_casst): Update logic for casting between vector types, and for casting from scalar to vector, try to match gcc C behaviour. * value.h (value_vector_widen): Declare. * opencl-lang.c (opencl_value_cast): New opencl specific casting function, handle special case for casting scalar to vector. (opencl_relop): Use opencl_value_cast. (evaluate_subexp_opencl): Use opencl_value_cast instead of value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE in order to use opencl_value_cast. 2013-01-25 Yao Qi * event-loop.c: Include "queue.h". (gdb_event_p): New typedef. (DECLARE_QUEUE_P): Use. (DEFINE_QUEUE_P): Use. (async_queue_event): Remove. (gdb_event_xfree): New. (initialize_event_loop): New. (process_event): Use QUEUE macros. (event_queue): Remove. (gdb_wait_for_event): Caller update. (check_async_event_handlers): Likewise. (poll_timers): Likewise. * event-loop.h (initialize_event_loop): Declare. * event-loop.c (gdb_event_xfree): New. * top.c (gdb_init): Call initialize_event_loop. 2013-01-25 Yao Qi * event-loop.c (async_queue_event): Remove one parameter 'position'. Remove code handling 'position' == TAIL. (gdb_wait_for_event): Caller update. (check_async_event_handlers): Caller update. (poll_timers): Caller update. * event-loop.h (enum queue_position): Remove. 2013-01-25 Maxim Kuvyrkov * MAINTAINERS: Update my email. 2013-01-25 Yao Qi * main.c (print_gdb_help): Remove "--epoch" from the help message. 2013-01-24 Ulrich Weigand  * symtab.c (skip_prologue_using_sal): Consider a file change the same as an increased line number 2013-01-24 Tiago Stürmer Daitx  * MAINTAINERS (Write After Approval): Add myself to the list. 2013-01-24 Tom Tromey * ada-lang.h (ada_decode_symbol): Make return type const. * ada-lang.c (ada_decode_symbol): Likewise. 2013-01-23 Doug Evans * linespec.c (find_linespec_symbols): Make static. 2013-01-23 Tiago Stürmer Daitx * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct type on float conversion for complex type. 2013-01-23 Siva Chandra Reddy Add a new class gdb.Architecture which exposes GDB's internal representation of architecture via GDB Python API. * Makefile.in: Add entries corresponding to the new file python/py-arch.c. * NEWS (Python Scripting): Add entries for the new class gdb.Architecture and the new method gdb.Frame.architecture. * python/py-arch.c: Implement gdb.Architecture class. * python/py-frame.c (frapy_arch): Implement the method gdb.Frame.architecture(). (frame_object_methods): Add 'architecture' to the method table. * python/python-internal.h: Add declarations of new utility functions. * python/python.c (_initialize_python): Initialize gdb.Architecture class. 2013-01-23 Doug Evans Work around binutils/15021. * dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and type_unit_group out of union s. All uses updated. (read_index_from_section): Watch for index version 8. (follow_die_sig): If using .gdb_index version <= 7, record the TU as an imported symtab. (write_psymtabs_to_index): Increment version number to 8. 2013-01-22 Pedro Alves * annotate.c (breakpoint_changed): Skip if breakpoint is not user-visible. 2013-01-22 Pedro Alves * annotate.c (annotate_breakpoints_changed): Rename to ... (annotate_breakpoints_invalid): ... this. Make static. (breakpoint_changed): Adjust. (_initialize_annotate): Always install the observers. Install a "breakpoint_created" observer. * annotate.h (annotate_breakpoints_changed): Delete declaration. * breakpoint.c (set_breakpoint_condition) (breakpoint_set_commands, do_map_commands_command) (init_raw_breakpoint, clear_command, set_ignore_count) (enable_breakpoint_disp): No longer call annotate_breakpoints_changed. 2013-01-22 Pedro Alves * annotate.c: Include "inferior.h". (frames_invalid_emitted) (breakpoints_invalid_emitted): New globals. (async_background_execution_p): New function. (annotate_breakpoints_changed, annotate_frames_invalid): Skip emitting the annotation if it has already been emitted. (annotate_display_prompt): New function. * annotate.h (annotate_display_prompt): New declaration. * event-top.c: Include annotate.h. (display_gdb_prompt): Call annotate_display_prompt. 2013-01-22 Pedro Alves * annotate.c (ignore_count_changed): Delete. (annotate_breakpoints_changed): Don't clear ignore_count_changed. (annotate_ignore_count_change): Delete. (annotate_stopped): Don't emit a delayed breakpoints-changed annotation. * annotate.h (annotate_ignore_count_change): Delete. * breakpoint.c (bpstat_check_breakpoint_conditions): Don't call annotate_ignore_count_change. 2013-01-22 Tom Tromey * dwarf2loc.c (dwarf2_compile_expr_to_ax) : Only require_rvalue for a register location. 2013-01-21 Marc Khouzam * breakpoint.c (print_one_breakpoint_location): Add MI field 'thread-groups' when printing a breakpoint. (output_thread_groups): New function. 2013-01-21 Siva Chandra Reddy * python/lib/gdb/commands/explore.py (CompoundExplorer.explore_expr): Correct the name of a method being invoked. (ExploreTypeCommand.invoke): Add a missing 'return'. 2013-01-21 Tom Tromey * gdb_obstack.h (obconcat): Move declaration here, from... * symfile.h (obconcat): ... here. * gdb_obstack.c: New file. (obconcat): Move from... * symfile.c (obconcat): ... here. * Makefile.in (SFILES): Add gdb_obstack.c. (COMMON_OBS): Add gdb_obstack.o. 2013-01-21 Tom Tromey * symfile.h (obsavestring): Don't declare. * symfile.c (obsavestring): Remove. * ada-exp.y: Use obstack_copy0, not obsavestring. * ada-lang.c: Use obstack_copy0, not obsavestring. * coffread.c: Use obstack_copy0, not obsavestring. * cp-namespace.c: Use obstack_copy0, not obsavestring. * dbxread.c: Use obstack_copy0, not obsavestring. * dwarf2read.c: Use obstack_copy0, not obsavestring. * jit.c: Use obstack_copy0, not obsavestring. * mdebugread.c: Use obstack_copy0, not obsavestring. * psymtab.c: Use obstack_copy0, not obsavestring. * stabsread.c: Use obstack_copy0, not obsavestring. * xcoffread.c: Use obstack_copy0, not obsavestring. 2013-01-21 Tom Tromey * dwarf2read.c (fixup_go_packaging): Save package name on objfile obstack. * gdbtypes.c (init_type): Don't copy name. 2013-01-21 Tom Tromey * dwarf2read.c (struct partial_die_info) : Now const. (struct attribute) : Now const. (struct fnfieldlist) : Now const. (dw2_get_file_names_reader, init_cutu_and_read_dies): Update. (partial_die_parent_scope): Make return type const. (partial_die_full_name, add_partial_symbol): Update. (dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make 'name' const. (find_file_and_directory): Make 'name' and 'comp_dir' const. (read_file_scope, read_func_scope, dwarf2_add_field) (dwarf2_add_member_fn, read_structure_type) (process_enumeration_scope, read_array_type, read_module_type) (read_base_type, read_subrange_type): Update. (dwarf2_start_symtab): Make 'name' and 'comp_dir' const. (new_symbol_full, guess_full_die_structure_name): Update. (dwarf2_canonicalize_name): Return const type. Make 'name' const. (dwarf2_name): Return const type. (dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir' const. 2013-01-21 Tom Tromey * gdbtypes.c (init_type): Make 'name' const. * gdbtypes.h (init_type): Update. 2013-01-21 Tom Tromey * buildsym.c (patch_subfile_names): Use set_last_source_file. (start_symtab): Make 'name' and 'dirname' const. Use set_last_source_file. (restart_symtab, reset_symtab_globals): Use set_last_source_file. (last_source_file): Define. Now static. (set_last_source_file, get_last_source_file): New functions. * buildsym.h (last_source_file): Don't declare. (start_symtab): Update. (set_last_source_file, get_last_source_file): Declare. * coffread.c (complete_symtab): Use set_last_source_file. (coff_end_symtab): Likewise. (coff_symtab_read): Use set_last_source_file, get_last_source_file. * dbxread.c (read_dbx_symtab, read_ofile_symtab): Use set_last_source_file. (process_one_symbol): Use get_last_source_file. * mdebugread.c (parse_partial_symbols): Use set_last_source_file. (psymtab_to_symtab_1): Use get_last_source_file. * xcoffread.c (process_linenos): Use get_last_source_file. (complete_symtab): Use set_last_source_file. (read_xcoff_symtab): Use set_last_source_file, get_last_source_file. (scan_xcoff_symtab): Use set_last_source_file. 2013-01-21 Tom Tromey * symtab.c (struct demangled_name_entry) : Now const. (symbol_set_names): Remove casts. Handle field const-ness. 2013-01-21 Tom Tromey * dwarf2read.c (new_symbol_full): Remove cast. * symtab.c (symbol_set_demangled_name): Make 'name' const. * symtab.h (symbol_set_demangled_name): Update. 2013-01-21 Tom Tromey * main.c (captured_main): Call bfd_init. 2013-01-21 Tom Tromey * gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI. * gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI. * minsyms.c (install_minimal_symbols): Don't check for _Z symbols. * NEWS: Update. 2013-01-21 Jan Kratochvil * symmisc.c (maintenance_print_msymbols): Check also ST_DEV. 2013-01-21 Jan Kratochvil Fix gdb.fortran/common-block.exp crash in PIE mode. * dwarf2read.c (new_symbol_full) : Use LOC_COMMON_BLOCK. * f-valprint.c (info_common_command_for_block): Expect LOC_COMMON_BLOCK in gdb_assert. * symtab.h (struct general_symbol_info): Update comment for the common_block member. (domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member. (enum address_class): New member LOC_COMMON_BLOCK. 2013-01-18 David Blaikie * MAINTAINERS (Write After Approval): Add "David Blaikie". 2013-01-18 Tom Tromey PR c++/14999: * dwarf2loc.c (dwarf2_compile_expr_to_ax) : Call require_rvalue. 2013-01-18 Yao Qi * dbxread.c (dbx_psymtab_to_symtab): Delete the declaration. (dbx_read_symtab): New declaration. (dbx_psymtab_to_symtab): Delete. (dbx_read_symtab): Rename from dbx_psymtab_to_symtab. Rename parameter PST to SELF. Exchanged two parameters. (start_psymtab): Caller update. * dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration. (dwarf2_read_symtab): New declaration. (dwarf2_psymtab_to_symtab): Delete. (dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab. Rename parameter PST to SELF. Exchanged two parameters. (create_partial_symtab): Caller update. * mdebugread.c (mdebug_psymtab_to_symtab): Delete. (mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab. Rename parameter PST to SELF. Exchanged two parameters. (parse_partial_symbols, new_psymtab): Caller update. * psympriv.h (struct partial_symtab) : Exchange two parameters. * psymtab.c (psymtab_to_symtab): Caller update. * xcoffread.c (xcoff_psymtab_to_symtab): Delete. (xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab. Rename parameter PST to SELF. Exchanged two parameters. (xcoff_start_psymtab): Caller update. 2013-01-18 Yao Qi * infrun.c (proceed): Rename local variable 'oneproc' to 'force_step'. 2013-01-17 Doug Evans * dwarf2read.c (dw2_build_type_unit_groups_reader): Delete. (dw2_build_type_unit_groups): Delete. All uses updated. * symtab.h (struct symbol_search): Add comment. 2013-01-17 Jan Kratochvil * symtab.c (compare_filenames_for_search): New comment for HAS_DRIVE_SPEC. 2013-01-17 Tom Tromey * cp-abi.c (cp_abi_completer): Fix typo in assignment. 2013-01-17 Jan Kratochvil * symtab.c (iterate_over_some_symtabs): New variable cleanups, initialize it by existing make_cleanup. Call new do_cleanups. 2013-01-17 Tom Tromey * cp-abi.c (cp_abi_completer): New function. (_initialize_cp_abi): Set completer for "set cp-abi". 2013-01-17 Tom Tromey * mem-break.c: Remove obsolete comment. * bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment. 2012-01-17 Sanjoy Das * jit.c (jit_reader_load_command): Interpret the jit reader name as an absolute path if it begins with a forward slash. 2012-01-17 Sanjoy Das PR gdb/14550 * jit.c (finalize_symtab): Ensure that only the global block has a NULL superblock. 2013-01-17 Pedro Alves * acinclude.m4: Include ../config/plugins.m4, ../config/largefile.m4 and ../config/lead-dot.m4. Add comments. * Makefile.in (aclocal_m4_deps): Update. * aclocal.m4: Renegerate. 2013-01-16 Doug Evans * contrib/cc-with-tweaks.sh: Add references to Fission docs. 2013-01-16 Pedro Alves Tom Tromey PR cli/7221: * NEWS: Add "catch signal". * breakpoint.c (base_breakpoint_ops): No longer static. (bpstat_explains_signal): New function. (init_catchpoint): No longer static. (base_breakpoint_explains_signal): New function. (base_breakpoint_ops): Initialize new field. * breakpoint.h (enum bpstat_signal_value): New. (struct breakpoint_ops) : New field. (bpstat_explains_signal): Remove macro, declare as function. (base_breakpoint_ops, init_catchpoint): Declare. * break-catch-sig.c: New file. * inferior.h (signal_catch_update): Declare. * infrun.c (signal_catch): New global. (handle_syscall_event): Update for change to bpstat_explains_signal. (handle_inferior_event): Likewise. Always handle random signals via bpstats. (signal_cache_update): Check signal_catch. (signal_catch_update): New function. (_initialize_infrun): Initialize signal_catch. * Makefile.in (SFILES): Add break-catch-sig.c. (COMMON_OBS): Add break-catch-sig.o. 2013-01-16 Tom Tromey * breakpoint.c (print_one_catch_fork, print_one_catch_vfork) (print_one_catch_solib, print_one_catch_syscall) (print_one_catch_exec, print_one_exception_catchpoint): Emit "catch-type". 2013-01-16 Yao Qi * printcmd.c (current_display_number): Make it static. 2013-01-16 Yao Qi * infcmd.c (step_once): Don't check '!single_inst' as it was checked before. 2013-01-15 Jan Kratochvil * dwarf2read.c (psymtab_include_file_name): Extend the function comment. 2013-01-14 Tom Tromey * cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the set command. * command.h (add_setshow_string_noescape_cmd): Update. * corefile.c (set_gnutarget_command): Remove trailing whitespace. (complete_set_gnutarget): New function. (_initialize_core): Set the "set gnutarget" completer. 2013-01-14 Tom Tromey PR symtab/14442: * c-typeprint.c (cp_type_print_method_args): Handle 'restrict'. (c_type_print_modifier): Likewise. * dwarf2read.c (read_tag_restrict_type): New function. (read_type_die_1): Handle DW_TAG_restrict_type. * gdbtypes.c (make_restrict_type): New function. (recursive_dump_type): Handle TYPE_RESTRICT. * gdbtypes.h (enum type_flag_values): Renumber. (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_RESTRICT. (TYPE_RESTRICT): New macro. (make_restrict_type): Declare. 2013-01-14 Tom Tromey PR symtab/14931: * psymtab.c (struct psymtab_state): New. (discard_psymtabs_upto, make_cleanup_discard_psymtabs): New functions. * psympriv.h (make_cleanup_discard_psymtabs): Declare. * dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions. 2013-01-14 Richard Sharman Pedro Alves PR remote/14786 * remote.c (remote_threads_info): Make a copy of the reply from qfThreadInfo and use that instead of rs->buf. 2013-01-14 Yao Qi * dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL. (dbx_psymtab_to_symtab): Likewise. * dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise. * mdebugread.c (mdebug_psymtab_to_symtab): Likewise. * xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise. 2013-01-13 Jan Kratochvil * parse.c (parse_exp_in_context): New variable inner_chain. Call make_cleanup_restore_current_language. Call set_language. Move OLD_CHAIN and INNER_CHAIN cleanups. * utils.c (do_restore_current_language) (make_cleanup_restore_current_language): New functions. * utils.h (make_cleanup_restore_current_language): New declaration. 2013-01-13 Jan Kratochvil * source.c (symtab_to_fullname): Apply rewrite_source_path also for non-existing files. * source.c (symtab_to_fullname): Do not prepend DIRNAME for non-existing files if FILENAME is already absolute. 2013-01-11 Jan Kratochvil * macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of fputs_filtered. Append trailing newline. 2013-01-11 Yao Qi Stan Shebs * psymtab.c (init_psymbol_list): Clarify the comment. 2013-01-11 Yao Qi * breakpoint.c (print_one_breakpoint_location): Remove dead code. (update_dprintf_command_list): Assert that 'printf_line' is non-null. Remove condition check. 2013-01-10 Jan Kratochvil Code cleanup. * psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return type const char *. * tui/tui-source.c (tui_source_is_displayed): Make the parameter fname const char *. * tui/tui-source.h (tui_source_is_displayed): Likewise. 2013-01-09 Anthony Green * cp-abi.c (cplus_print_vtable): Don't return value from void function. * ada-lang.c (re_set_catch_assert): Ditto. 2013-01-09 Doug Evans * symfile.h (quick_symbol_functions): Delete member pre_expand_symtabs_matching. All uses removed. * dwarf2read.c (dw2_lookup_symbol): Implement. (dw2_do_expand_symtabs_matching): Delete. (dw2_pre_expand_symtabs_matching): Delete. (struct dw2_symtab_iterator): New type. (dw2_symtab_iter_init, dw2_symtab_iter_next): New functions. (dw2_expand_symtabs_for_function): Rewrite. (dwarf2_gdb_index_functions): Update. * psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete. (psym_functions): Update. 2013-01-09 Tom Tromey * config/pa/hpux.mh (NATDEPFILES): Remove somread.o. * configure: Rebuild. * configure.ac: Add somread.o to the build if BFD has SOM support. * somread.c: Include som/aout.h, not syms.h. (som_symtab_read): Use som_external_symbol_dictionary_record. Unpack records manually. (_initialize_somread): Declare. 2012-01-08 Mike Frysinger * common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]: Cast return_address to 64bits. 2013-01-08 Hui Zhu * printcmd.c: Remove define of function output_command. * tracepoint.c: Remove extern of function output_command. * valprint.h: (output_command): New extern. 2013-01-07 Tom Tromey * objc-lang.c (objc_emit_char, objc_printchar, objc_printstr): Remove. (objc_language_defn): Use c_printchar, c_printstr, c_emit_char. 2013-01-07 Tom Tromey PR cli/7719: * NEWS: Update. * ada-valprint.c (printstr, print_field_values): Remove "inspect_it" code. * cp-valprint.c (cp_print_value_fields): Remove "inspect_it" code. * jv-valprint.c (java_print_value_fields): Remove "inspect_it" code. * m2-lang.c (m2_printstr): Remove "inspect_it" code. * main.c (captured_main): Remove "epoch" argument. * objc-lang.c (objc_printstr): Remove "inspect_it" code. * p-lang.c (pascal_printstr): Remove "inspect_it" code. * p-valprint.c (pascal_object_print_value_fields): Remove "inspect_it" code. * printcmd.c (print_command_1): Remove 'inspect' argument. (print_command, call_command): Update. (inspect_command): Remove. (_initialize_printcmd): Make "inspect" an alias for "print". * top.c (epoch_interface): Remove. * top.h (epoch_interface): Remove. * valprint.c (user_print_options): Update. (print_converted_chars_to_obstack): Remove "inspect_it" code. * valprint.h (struct value_print_options) : Remove field. 2013-01-04 Tom Tromey * valprint.h (read_string): Add 'extern'. 2013-01-07 Joel Brobecker * darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test used to decide whether to define darwin_read_dyld_info or not. 2013-01-03 Pierre Muller * main.c (relocate_gdb_directory): Avoid calling stat function if DIR is empty. 2013-01-03 Yao Qi * psymtab.c (fixup_psymbol_section): Update declaration. (fixup_psymbol_section): Remove code returning value. 2013-01-03 Yao Qi * symtab.h: Remove some out of date comments. (enum exception_event_kind): Move it ... * breakpoint.c: ... here. 2013-01-02 Iain Sandoe PR gdb/14405 * darwin-nat.c (darwin_read_dyld_info): Only build if TASK_DYLD_INFO_COUNT is defined. (darwin_xfer_partial): Call darwin_read_dyld_info only if TASK_DYLD_INFO_COUNT is defined. 2013-01-02 Tom Tromey * symfile.h (struct ecoff_debug_hack): Remove. * objfiles.c: Don't include mdebugread.h. 2013-01-02 Tom Tromey * config/i386/darwin.mh (NATDEPFILES): Remove machoread.o. * configure.ac: Check for Mach-O support in BFD. Update CONFIG_OBS. * configure: Rebuild. 2013-01-02 Tom Tromey * acinclude.m4 (GDB_AC_CHECK_BFD): New macro. * configure.ac: Use GDB_AC_CHECK_BFD. * configure: Rebuild. 2013-01-01 Maxim Kuvyrkov * MAINTAINERS: Update my email. 2013-01-01 Joel Brobecker * cli/cli-script.h (make_cleanup_free_command_lines): Make extern. 2013-01-01 Joel Brobecker * rs6000-nat.c (bss_data_overlap): New function. (vmap_symtab): Use it to adjust the .bss section's offset. 2013-01-01 Joel Brobecker Update year range in copyright notice of all files. 2013-01-01, 13 Joel Brobecker * top.c (print_gdb_version): Update copyright year. For older changes see ChangeLog-2012. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never coding: utf-8 End: