# Sanitize.in for devo.
# $Id$
#

# Each directory to survive it's way into a release will need a file
# like this one called "./.Sanitize".  All keyword lines must exist,
# and must exist in the order specified by this file.  Each directory
# in the tree will be processed, top down, in the following order.

# Hash started lines like this one are comments and will be deleted
# before anything else is done.  Blank lines will also be squashed
# out.

# The lines between the "Do-first:" line and the "Things-to-keep:"
# line are executed as a /bin/sh shell script before anything else is
# done in this 

Do-first:

r5900_files="r5900.igen"
if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
        keep_these_too="${r5900_files} ${keep_these_too}"
else
        lose_these_too="${r5900_files} ${lose_these_too}"
fi

sky_files="ChangeLog.sky sky-device.c sky-device.h sky-dma.c sky-dma.h sky-bits.h"
sky_files="$sky_files sky-engine.c sky-gpuif.c sky-gpuif.h"
sky_files="$sky_files sky-hardware.c sky-hardware.h"
sky_files="$sky_files sky-libvpe.c sky-libvpe.h sky-pke.c sky-pke.h"
sky_files="$sky_files sky-vpe.h sky-vu.h sky-vu0.c sky-vu0.h sky-vu1.c sky-vu1.h"
if ( echo $* | grep keep\-sky > /dev/null ) ; then
        keep_these_too="${sky_files} ${keep_these_too}"
else
        lose_these_too="${sky_files} ${lose_these_too}"
fi

vr5400_files="vr5400.igen mdmx.igen"
if ( echo $* | grep keep\-vr5400 > /dev/null ) ; then
        keep_these_too="${vr5400_files} ${keep_these_too}"
else
        lose_these_too="${vr5400_files} ${lose_these_too}"
fi

# All files listed between the "Things-to-keep:" line and the
# "Files-to-sed:" line will be kept.  All other files will be removed.
# Directories listed in this section will have their own Sanitize
# called.  Directories not listed will be removed in their entirety
# with rm -rf.

Things-to-keep:

ChangeLog
Makefile.in
README.Cygnus
config.in
configure
configure.in
gencode.c
interp.c
sim-main.h
tconfig.in
mips.igen
m16.igen
m16.dc
m16run.c
mips.dc

Things-to-lose:


Do-last:

r5900_files="ChangeLog configure configure.in sim-main.h interp.c gencode.c mips.igen mips.dc m16.igen r5900.igen"

if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
	for i in $r5900_files ; do
		if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Keeping r5900 stuff in $i
			fi
		fi
	done
else
	for i in * ; do
		if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Removing traces of \"r5900\" from $i...
			fi
			cp $i new
			sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
				if [ -n "${verbose}" ] ; then
					echo Caching $i in .Recover...
				fi
				mv $i .Recover
			fi
			mv new $i
		fi
	done
fi


sky_files="ChangeLog Makefile.in configure configure.in"

if ( echo $* | grep keep\-sky > /dev/null ) ; then
	for i in $sky_files ; do
		if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Keeping sky stuff in $i
			fi
		fi
	done
else
	for i in * ; do
		if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Removing traces of \"sky\" from $i...
			fi
			cp $i new
			sed '/start\-sanitize\-sky/,/end-\sanitize\-sky/d' < $i > new
			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
				if [ -n "${verbose}" ] ; then
					echo Caching $i in .Recover...
				fi
				mv $i .Recover
			fi
			mv new $i
		fi
	done
fi


tx19_files="ChangeLog configure configure.in sim-main.h interp.c gencode.c mips.igen mips.dc m16.igen"

if ( echo $* | grep keep\-tx19 > /dev/null ) ; then
	for i in $tx19_files ; do
		if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Keeping tx19 stuff in $i
			fi
		fi
	done
else
	for i in * ; do
		if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Removing traces of \"tx19\" from $i...
			fi
			cp $i new
			sed '/start\-sanitize\-tx19/,/end-\sanitize\-tx19/d' < $i > new
			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
				if [ -n "${verbose}" ] ; then
					echo Caching $i in .Recover...
				fi
				mv $i .Recover
			fi
			mv new $i
		fi
	done
fi


tx49_files="ChangeLog configure.in configure gencode.c"

if ( echo $* | grep keep\-tx49 > /dev/null ) ; then
	for i in $tx49_files ; do
		if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Keeping tx49 stuff in $i
			fi
		fi
	done
else
	for i in * ; do
		if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Removing traces of \"tx49\" from $i...
			fi
			cp $i new
			sed '/start\-sanitize\-tx49/,/end-\sanitize\-tx49/d' < $i > new
			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
				if [ -n "${verbose}" ] ; then
					echo Caching $i in .Recover...
				fi
				mv $i .Recover
			fi
			mv new $i
		fi
	done
fi


vr5400_files="ChangeLog configure configure.in sim-main.h interp.c gencode.c mips.igen mips.dc m16.igen vr5400.igen mdmx.igen"

if ( echo $* | grep keep\-vr5400 > /dev/null ) ; then
	for i in $vr5400_files ; do
		if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Keeping vr5400 stuff in $i
			fi
		fi
	done
else
	for i in * ; do
		if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Removing traces of \"vr5400\" from $i...
			fi
			cp $i new
			sed '/start\-sanitize\-vr5400/,/end-\sanitize\-vr5400/d' < $i > new
			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
				if [ -n "${verbose}" ] ; then
					echo Caching $i in .Recover...
				fi
				mv $i .Recover
			fi
			mv new $i
		fi
	done
fi



never_files="ChangeLog configure configure.in interp.c gencode.c mips.igen mips.dc"

	for i in * ; do
		if test ! -d $i && (grep sanitize-cygnus-never $i > /dev/null) ; then
			if [ -n "${verbose}" ] ; then
				echo Removing traces of \"cygnus-never\" from $i...
			fi
			cp $i new
			sed '/start\-sanitize\-cygnus\-never/,/end-\sanitize\-cygnus\-never/d' < $i > new
			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
				if [ -n "${verbose}" ] ; then
					echo Caching $i in .Recover...
				fi
				mv $i .Recover
			fi
			mv new $i
		fi
	done


for i in * ; do
        if test ! -d $i && (grep sanitize $i > /dev/null) ; then
                echo '***' Some mentions of Sanitize are still left in $i! 1>&2
        fi
done 

# End of file.